SOLING SL-6703 Car DVD player User Manual

SHENZHEN SOLING INDUSTRIAL CO., LTD. Car DVD player

User manual

AVN675DUSB RESETMAPGPSMUTESDPWR VOLMICAUXAV N6 75 D6.75Double Din with fixed panel
Panel function description 03Remote control function 04Turn on/off Host 06Access main interface 06Wallpaper and Logo Setup 06Radio Function Operation 07Disc Function Operation 08U Disc/SD Card function operation 09BT Function Operation 10Music function operation 11External input operation 11Compass 12Counter 12GPS Navigation Function Operation 12Other function operation 13Basic operation setup menu 14 Access setup interface 14General Settings 16Trouble shooting 17CONTENTSNOTE2. To drive safely and avoid break the traffic rules, do not watch program and operate the unit while driving.3. To avoid short circuit, please do not exposure the device to rain.4. To avoid short circuit, please do not put in the device or any metal objects left behind.5. Not open the machine for maintenance by yourself, please go to the professional repair service station for repairing.6. When the engine is turned off, please do not use the car audio a long time, otherwise the battery may run out.7. Do not insert anything to the device’s vent and other openings.8. Damage to the screen carefully! Do not use sharp objects push, rub, Stroke the screen. 1. Please read the instructions before using the unit, the damage caused by not following the instructions will not enjoy the warranty.18 Accesories18WIRING DIAGRAM02SPECIFICATIONSPower supplyPower rangeMax operate currentGround systemBluetoothAudioVideoDisplayResolutionMax output power Subwoofer OutputFM tunerFrequency rangeSignal/Noise ratioStereo separationSearch station voltDistortion rateAM tunerFrequency rangeLimit noise sensitivityDVD playerSignal/Noise ratioFrequency responseDC 12V10.8-16.0V DC15ANegative ground2.0, class IIRCA 4 Output, RCA 2 InputRCA 2 Output, RCA 1 Input16:9800*480 Pixels4*25W 1 Output87.5-107.9 MHz55dB30dB20-30dBuv1.5%530-1710 KHz32dB70dB20Hz-20KHz1919SPECIFICATIONS
18 035. RESETPress this button can back to default mode. 6. USB slot 7. AUX slot 8. Eject disc 9. IR To receive infrared signals from the remote control matched with the unit.10. Disk load slot 11. SD slotConnect the SD memory card to this socket, and the unit can play MP3 music. 12.MICBT microphone input socket.Connect USB mobile device to read video, audio and image files of large volume.Warning: You can only use either front or rear USB at a time. Never connect both front and rear USB at the same time! This could cause malfunctions.To input external audio.Warning: You can only use either front or rear AUX at a time. Never connect both front and rear AUX at the same time.Press this button can eject the disc.Disk loading / exit window.Panel function description1. PWR / VOL button 2. MUTE buttonPress the button to close volume output, re-press it to resume previous volume level. 3. GPS button 4. MAP slot Press this button to power on; In boot-up state, long press this button to power off; short press to return to main menu under an mode, rotating the knob to adjust the volume.Press it to enter or exit the navigation. Insert a map card to read navigation map data.USB RESETMAPGPSMUTESDPWR VOLMICAUXAVN 67 5DWIRING DIAGRAMThis player is equipped with ISO standard connector, please follow below instruction: ● Yellow – 12 V Constant● Black – Ground wire● Blue - Power Antenna / Remote Amp Turn On● Orange – Back-Up Camera Trigger (+)● Red - ACC ON (+12V)● Parking Brake (-)● White/White black - Left front speaker (+/-)● Purple/Purple black - Right rear speaker (+/-)● Green/Green black - Left rear speaker (+/-)● Grey/Grey black - Right front speaker (+/-) AccessoriesLeft BracketRight BracketWhite screw11811111Warranty cardRegistration cardManualQRGPower harness Accessories1Trim
04 17Remote control function1. POWERPress once to switch on, press again to switch off.2. MUTE buttonPress once to turn off audio output, press again to resume volume level.3. NAVI buttonPress it to enter & to exit the navigation.4. SOURCE buttonPress this button to choose audio sources.5. EQ button Press this button 6. SEEK+ ( )/ SEEK- ( )buttonPress this button to manual turning, sped or quick back, previous song and next song.7. VOL+ ( )/ VOL- ( )Press this button to increase or decrease volume level.8. SEL buttonPress this button to choose sound feature.9. LOUD buttonPress this button to startup LOUD function.10. BAND -P/N buttonIn radio mode, press this button to choose band.In VCD, DVD mode, press this button to choose PAL, AUTO or NTSC system.11. LOC/RDM buttonIn radio mode, press this button to switch between local and direction, In VCD, CD mode, press this key to randomly play.12. STOP buttonPress this button to stop playing.13. PLAY/PAUSE buttonPress this button to switch between play and pause, In stop mode, press this button to play.14. ST/PROG buttonIn radio mode, press this button to choose stereo or mono station. In audio mode, it can help stop button to programmed play.at the can switch between different modes.TroubleshootingPROBLEM CAUSE CORRECT ACTIONPoor performance ofradio stationCannot load disk There is a disk inside Eject disk, then, slot in new discAfter ignition switchoff, setting information all loseReset information and saveChange battery or fuseCannot power onCheck fuse Change fuse same as the old oneSome factors cause MPU wrong operation Press RES button on the panel by power onpenpoint, then, Weak signal Move the car to another place, then researchCannot play discDisc is scratched Change new discPut wrong side of disc into the unit Insert in the disk with sign side upClean lens by lens clean discLens is dirtyCannot switchlanguage/subtitle There is only one language/subtitle in disc If disc is not with multi-language/subtitle, it cannot switch language/subtitleNo image Other factors cause MPU wrong operation Press [RES] button on the panel by penpoint, then, power onCannot watch image during driving It’s not allowed to watch image during drivingPark the car in a safe place, put the car stall in “ P ”postion, pull up the hand brake, parking brake wire must be grounded
0516General SettingsIn the set interface click [GENERAL] icon, into the General set interface. (Password: 888888). General settings have been set at the factory.Regional radioIn the General Settings screen click [RADIO] icon to enter the Radio setting interface, as shown below:Select your desired area. System settingIn the General Settings screen click [SYSTEM] icon to enter the System setting interface, as shown below:You can choose the system settings interface has the feature is turned on or off.Slide up and down to select your preferred language mode.Language settingIn the General Settings screen click [LANGUAGE] icon to enter the Language setting interface, as shown below:Version InformationVersion Information interface, as shown below:In the General Settings screen click [VERSION] icon to enter the The version information is displayed please prevail in kind.Car Set settingsIn the General Settings screen click [Car Set] icon to enter the agreement setting interface, as shown below:You will need to set protocol, click the icon to confirm the save the settings.15. 0-10+ buttonPress this button to choose desired song, section, preset stations.Decimal numbers, for example the 19th song, press 10+ and 9 button.16. AMS/RPT buttonIn radio mode, press this button to browse stored stations. In audio mode, press this button to play repeatedly.17. TITLE buttonIn DVD mode, press this button to play back to the top menu of disc.18. AUDIO buttonIn DVD mode, press this button to switch language of dialogue. In VCD mode, press this button to choose left track, right track,and stereo.19. GO TO buttonIn DVD mode, press this button, you can define playing time.20. SUB-T buttonIn DVD mode, press this button to switch language of subtitle.21. PBC buttonIn VCD mode, press this button to display all song menus, work with number button to choose songs.22. UP, DOWN, LEFT, RIGHT, ENTER buttonIn DVD mode, press this button to move cursor up, down, left, right to choose item in menu, Press the enter button to confirm choice.23. SLOW buttonIn audio mode, press this button to slow backward and slow forward.24. SETUP buttonIn audio mode, press this button to choose different set items.25. OSD display Press this button to display the title chapter and the left time.26. ZOOM buttonIn DVD/VCD mode, press this button to ZOOM in.27. MENU buttonPress button to back to the main menu.BATTERY CHANGE When control distance of remote control becomes shorter or no function, please change battery, please confirm polarity before change.One hand press stopper, then pull out battery.Put battery into controller.Insert battery holder into controller.
06 15Serial port settingIn the set interface click [SET COMM] icon, into the Serial port set interface. Choose good then click the icon to save your settings and exit the serial port settings interface.Touch calibrationIf touch calibration error occurs, you can adjust the touch coordinate by “Touch calibration”. Click [CALIBRATION] icon on setup interface, click OK to pop up a [Do you want to calibration?] as shown below, click OK to confirm to access touch calibration interface:Touching methods Use touch pen to click the center of”+” icon, and move along with center of “+” icon so as to calibrate the screen, It shall automatically save data and exit after screen calibration. Please accurately click all positions on screen, or the accuracy of touch calibration shall be affected. Steering wheel setting Click the settings interface [STEER] icon into the steering wheel settings interface. Steering steps:The original line of control of the vehicle side, the positive, the negative and machine side control line cathode, anode connection after connection:① Touch [Reset] and press above the steering wheel buttons one by one, and record the appropriate sequence and function, touch [allocation]. The steering wheel buttons ② Touch the desired distribution voltage value (such as: 2.00V).③ select the appropriate settings (such as: volume +).④ completed the steering wheel buttons will display the corresponding function.⑤ After completing the settings, touch [OK] to save the settings.⑥ For the reset function, can touch [Reset] (the original settings will all be cleared), and repeat Step ② ~ Step ④⑦ You can also choose to set a good model of the steering wheel. Click the models select] icon pop-up model selection interface, select your car type click OK icon to save the settings. forresetting.Turn on/off HostWhen the ignition switch is put in ACC or ON position, Press [ ] button on the front panel to turn on the unit. After the host starts, hold [ ] button for 3 seconds , the host will turn off.Access main interfaceIn boot-up state, press [ ] button on the panel to switch to main interface, as shown in below picture:1. 2. Touch in different interface style to switch between. Press and hold the hide icon hold to the left and right drag, you can hide the location of the icon to the left or right.3. Click the icon or gently with a touch pen or finger to the left and sliding screen to toggle the main menu page.4. To reset the shortcuts with a touch pen or finger to hold down the icon to drag the icon to drag the icon to the shortcut bar to the bottom of the screen, move over the icon will replace the old icon. If you want to delete the shortcut icon, first press and hold the icon until the trash can icon and then drag to the trash.5. The icon at the touch on the main interface to switch between day, night and off-screen three modes. 6. Touch the function icons so as to access the corresponding function operations.7. Double-click the watch icon to enter the clock setting interface:Click the icon to select your favorite type of clock. Click the icon unlock unlocked drag minutes to set the time, set up and click again to icon to lock the clock.Wallpaper and Logo SetupClick on the main interface [wallpaper] icon into the wallpaper and boot screen settings interface, you can choose your favorite wallpaper and boot screen.Note: The start-up screen has been set at the factory.
14 07Navigation settingNavigation path has been set at the factory, please do not enter the navigation setup interface to change the path freely, otherwise the procedure many lead to abnormal navigation. Time settingClick the Settings interface Time setting icon, enter the Time settings screen, as shown below:12h/24h interchangeable, In the year, month, day, hour, sub-office slide up and down to the relevant settings.Zone is set to enter the time zone settings interface when clicked.Choose the time zone, click the icon to save your settings and exit the time setting interface.Audio settingIn the set interface click [AUDIO] icon, into the Audio set interface. Click into sound effect default interface.Press into loudspeaker interface, click to adjust the channel of loudspeaker, touch to get back to initial setting.BEEP: click that icon to switch on/off that.LOUD: click that icon to switch on/off that. GPS. MIX: click that icon to switch on/off that. EQ: click that icon to switch different mode.Basic operation setup menuClick on the main screen [Setup] icon, enter the setting interface.With a finger or touching pen to gently sliding screen can be set about switching interface.Access setup interfaceVideo settingIn the set interface click [VIDEO] icon, into the video set interface. Brightness: Forbid play on run: Driving ban and click on play icon can open/close the function (Optional).Drag icon can adjust video the screen brightness. Radio Function Operation1. Enter/exitTouch [Radio] icon in the main interface to enter into the radio interface.2. Operation stored radioEach band can be stored six radio stations, radio stations can be stored directly click (P1-P6) choice, and will be displayed on the screen.3. How to save radio stationsSelect a band, and then select a radio station. Press and hold button (P1-P6) to select the preset number will appear in the corresponding number button on the screen. Touch [5. Search/Save radio stationsShort touch the [ ] button, browse 1-6 sets of bits stored on the radio, Long touch the [ ] button to long-automatic station search, and the strongest radio signals P1-P6 are stored in the display position on the table.6. Play radio station selectionTouch [ ] icon pop-up selection sets the keyboard input radio frequency selectable radio frequency spectrum or you can drag directly touch the icon to select a stored radio station.Touch [ ] can enter icon spectrum interface. Double-click the spectrum can switch over the spectrum style.Touch the corresponding icon had no effect Touch [ ] icon to return to main interface, and then touch other function icons so as to exit radio mode.4. Band selection ] icon so as to switch among FM1, FM2, FM3, AM1, AM2 bands.7. Other FunctionsTouch [ ] icon to access sound setting interface. Touch [ ] icon so as to turn on/off loudness function.Touch [ ] icon so as to turn on/off Long/Short-Range function. Touch [ ] icon to turn on/off stereo. 8. RDS Function RDS function provides series information (such as traffice information, name of station) ,and can automatically switch tothe station with stronger signal and carries the same program.AF: touch the button to turn on/off AF mode. TA: touch the button to turn on/off TA mode. PTY: touch the button the screen displays program types, users can search station according to program type.NOTE: If the unit does not have RDS function, it has no AF/TA/PTY function, . Sliding around
08 13Reverse field simulation Rearview backup imageOther function Rearview functionIn any running state, the video signal can switch to reverse video state when reversing the car, and the system shall return to running state after reversing the car. WarningDo not rely on CCD system completely, please make sure your car is safe by your eyes during driving. Back rearview system only assists in driving. As the distance range of rearview system is limited, completely relying on the rearview system during driving may cause accidents.operationits initial 0 0 : 0 0 : 0 9 0 0 : 0 4 : 4 8Disc Function Operation1. Play/eject disc Play discInsert the disc into the disc slot with the printing surface up, system will detect the disc and automatically take it in to read and play.Eject disc(1) Click button on the panel to eject the disc.(2) If a disc has not been took away 15 seconds after it is ejected, system will automatically take in the disc but not play. Do not insert two discs or more.2. DVD/VCD disc playbackDuring playback of disc, touch the middle lower area of the screen to pop up the touch menu, operate the touch menu to performvarious playback controls.After a CD is inserted, system shall access disk reading state immediately.When there is a disk in the device, click [Disk] at the main interface so as to access disk reading state.After the disk being read out, system shall automatically play in sequence.4. MP3/JPEG disk playingWhen the disk contains readable files, such as MP3/JPEG files, it shall be automatically read out and played after slipping into DVD player.During playing, touch the screen area and the touch menu shall pop up. Operate the touch menu for playing.3. CD Disc Playback5. Touch Menu Function DescriptionThe disc read, touch area of the screen, pop-up touch menu. Operate a variety of playback controls the touch menu.Random playScanningForward/Backward playThe next page menuPlay/PauseStopThe previous/next songVolume button Number Button Repeat play Back to Root MenuAccess title menu Zoom in/outChannel conversion Language SelectionChanges or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help
0912COMPASS In the main interface touch [COMPASS] icon, into a compass interface.COUNTERIn the main interface touch [COUNTER] icon, into the counter interface.3. Satellite receiverNavigation system can keep receiving eight satellite signals. As a general rule, the navigation system can figure out your accurate location after received 3-4 satellite signals. But sometimes, weather and tall buildings in the city shall affect the signal receiving effect, as is shown in following figure:GPS Navigation Function Operation 1. Navigation Function Operation For detailed operation of navigation function, see “Navigation Operation Manual”.In tune Among tall buildings At the boulevard The antenna is sheltered Underground parking Overpass or viaduct2. Receiving signal error When the satellite signals can be normally received, the error of standard GPS shall be about 7 meters, Driving on parallel sections,there shall be error even the product has auto-correct function. The normal receiving of satellite signals shall be affected and causeerror in following environment. Forward/Backward playClick the button, forward/backward play. The previous/next songThe previous/next songClick the button, . Channel conversionClick Switchable channel the button, . Back to Root MenuClick the button the DVD state can return to the root menu of the disc, VCD state can enter the PBC menu and playback. Access title menu Press this button to return to title menu of the disk. Directly click menu bar at title menu interface for playing. During VCD playing, this function only works when PBC is off. Repeat play In playing state, touch this button to start repeat play function: Chapter repeat → Title repeat Off.→Entire disc repeat → Language Selectioncan switch subtitle language.Touch the button, Note: the need to support the the subtitle language discs have this feature Number ButtonClick the button, pop-up numeric keypad. By click the numeric keypad for direct selections played.U Disc/SD Card function operationWhen there is a USB device/SD card connected, the unit can conduct the playback of Insert/Eject USB storage device1. Connect a U disc recorded with media information to the unit by a USB connecting cable. 2. When there is a need to eject the USB device, exit the USB device playback screen first, and then take out the device. Insert/eject SD card1. Insert a SD card recorded with media information into the SD card slot in the unit correctly until it is locked. 2. Enter/exitInsert a USB storage device or SD card to automatically play data contained in it. If the unit has connected with a USB device or SDcard, touch [USB] icon in the multimedia interface to enter into the external storage playback interface; Touch [SD] icon to enter intothe SD card playback interface. During playback, touch the top center area of the screen to pop up the touch menu, operate touch menuto perform various playback controls. audio/video/image files in the USB device/SD card.When pulling out the SD card, exit SD card playing state first, then press the SD card and it shall pop up after unlocking.PlayAfter SD card/USB removable device being read out, the operation methods are similar to disk operation methods.
10 11PIC 2PIC 1PIC 3PIC 4Previous song Play/Pause Next songBT Function Operation1. Enter/exitTouch [BT] icon in the main interface to enter the BT interface, Touch icon to exit BT interface.2. Pair/linkBT BTBTBTBT BTBTBTBTas PIC 1: To use hand-free function, make connection first, i.e. match the host with the Set the host to be matching state, and open the of your mobile phone and use the mobile phone to search device, the mobile phone shall prompt to match password with the when it has searched the device. Input password (0000) to the mobile phone and confirm. The mobile phone shall prompt whether authorize to this device, please select [Yes]. Phone and shall automatically connect within 20 seconds. Under any working mode, the host shall convert to state if there is an incoming call. And the host shall restore to current mode after hanging up. When the device matches with this device, the connection status shall display , otherwise, it shall display . 3. DialingYou can dial on mobile phone directly or input phone number through the number buttons on the screen, click to delete if there is input error. After input the phone number, click to make a call. 4. Call recordsDialed numbers: Touch this button to check all the dialed phone numbers.Received calls: Touch this button to check all the phone numbers of received calls.Missed calls: Touch this button to check all the phone numbers of missed calls.Delete: Touch the button to delete a selected record.All Delete: Touch the button to delete all information in phone book. mobile phone.Operation methods:In the BT interface of click to access call records interface as PIC 2: 5. Phone bookAfter the cellphone gets connected to the unit, you can read records in the phonebook of your cellphone and store information in the phonebook of the unit. In the BT interface of click to access Phonebook interface as PIC 3: Touch icon in the phonebook interface, the unit will automatically download phone numbers and put them in order.6. BT MusicIn the BT interface of click to access BT music interface as PIC 4:MUSIC function operationinterface, as Connect to Music first, touch [Music] icon on main interface to access Music shown in below diagram.Click icon return to a interfaceShort press next SongLong press fast forward playback/rewind playbackprevious Song/Sound settings Play/PauseLoudness on/offBack to the previous directory Page up/down Number Button Random playcycle playExternal input operation Connect the video input plug with external video input jack, and connect the audio input plug with external audio input jack. Touch [AV-IN] icon on main interface to access external input interface.Click icon into the sound settings screen. Loudness on / off.

Navigation menu