SOLING SL-9XXX Car DVD player User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1169414
Application ID	mccmllrfUiSX7c2mEpj65A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	325.77kB (4072163 bits)
Date Submitted	2009-09-15 00:00:00
Date Available	2009-09-15 00:00:00
Creation Date	2009-07-24 09:39:00
Producing Software	Corel PDF Engine Version 1.0.0.458
Document Lastmod	0000-00-00 00:00:00
Document Title	9268(UI_3)_带后蓝牙+RDS带刹车+TV(EN)未转曲
Document Creator	CorelDRAW 版本 12.0
Document Author:	郭吉军

INSTRUCTIONS
MP4/DVD/VCD/CD/MP3/TV/BLUETOOTH
* 7” inch, 16:9 TFT LCD display
* Touch screen
* Compatible with MP4(AVI/DIVX/5.X); DVD/VCD/SVCD/
WMA/MP3/JPEG disc
* Rearview CCD Video output
* FM/AM radio, 30 preset stations
* Support Bluetooth function
* Touch screen is adjustable automatically
* Angle of display adjustment by grade freely
* Touch screen control
SPECIFICATIONS:
Power supply
Power range
Max operate current
DC 12V
10.8-16.0V DC
10A
Install size
178X153X101mm
Ground system
Negative ground
FM tuner
Frequency range
Signal/Noisse ratio
Stereo separation
Search station volt
Distortion rate
87.5-108MHz
55dB
30dB
20-30dBuv
1.5%
AM tuner
Frequency range
Limit noise sensitivity
522-1620KHz
32dB
DVD PLAYER
Signal/Noise ratio
Frequency response
70dB
20Hz-20KHz
INSTRUCTIONS
INSTRUCTIONS
WIRING DIAGRAM
WELCOME
This player is equipped with ISO standard connector, please follow below instruction:
Thank you for enjoying our series of digital car A/V product.
To properly use this product, please go through this instruction manual for installation
and operation, put it in a safe place for future use!
Red - ACC ON (+12V)
●
Grey/Grey black - Right front speaker (+/-)
●
Yellow – 12 V Constant
●
White/White black - Left front speaker (+-)
●
Black – Ground wire
●
Purple/Purple black - Right rear speaker (+/-)
●
Blue - Power Antenna / Remote Amp Turn On
●
Green/Green black - Left rear speaker (+/-)
●
Orange – Back-Up Camera Trigger (+)
●
Pink – Parking Brake (-)
●
WARNING
1. Please keep the disc slot clean, wipe it off when there is some dirt on it. You should
wipe off any dirt on the disc before you place it into the unit. If the disc is dirty and
you place it inside the unit, it will cause the unit to go into an error and will not
play the disc. Please ask professional to clean the laser.
2. Playing the radio at higher volumes for a long period of time may cause hearing
issues. You should play this unit at a moderate listen level.
3. This unit is set up by precision parts. If you open up this unit, you will void any and
all of your warranty.
4. Please do not touch LCD display with any hard object so that you prevent it from
getting scratched or damaged.
5. To avoid an accident caused by watching the LCD screen. This unit has a vehicle
lock out wire so that you will not be allowed to watch a video while driving down
the road.
6. This unit is meant for a 12V power and negative ground system from a vehicle.
NOTE:
We keep improving this product all the time. There may be some changes in it that are
not in this manual.
INSTRUCTIONS
INSTRUCTIONS
TROUBLE SHOOTING
NOTE
● This unit can play the following disc
MODE
ICON
PROBLEM
CONTENT
DISC SIZE
Can not power on
CAUSE
SOLUTION
Check whether power fuse
blew or not
Change fuse same as the old one
Some factor cause MPU wrong
operation
Press RESET button on the panel by pen
point, then, power on
DVD
Sound, image
12cm
VCD
Sound, image
12cm
MP3
Sound only
12cm
Wrong connection between
After ignition
switch off, setting
ignition line ACC and
information all lose Constant 12 Volt wire
Remote control no No enough power supply
function
from battery
12cm
Poor performance
of radio station
Improper length of antenna,
poor connection of antenna
grounding
Check whether antenna is connected or not,
or poor connection
Can not load disc
The disc will not go in all
the way
Remove the 2 screws on top of the radio
Disc is scratched
Change new disc
Put wrong side of disc into unit
Slot in the disc with sign side up
Lens has dirty
Clean lens by lens clean disc
There is only one language/
subtitle in disc
Video line between unit and
TV is not properly connected
If disc is not with multi-language/subtitle, it
cannot switch language/subtitle
CD
Sound only
Note: 1. This unit is compatible with MP4/DVD/VCD1.0/2.0/3.0 version,
DVD, CD-R, CD-RW, MP3, WMA, JPEG.
2. When playing a DVD, VCD, MP3, CD disc the display will auto
identify the disc and show corresponding word. When
appears
on the display, that means that there is no function, please choose
another mode.
Can not play disc
Can not switch
language/subtitle
● It may lead to accident if you are going to change unit.
● Playing disk during car run on bumpy road will damage laser. Playing substandard
disc or damage disc will damage laser.
● The environment of inside car is not good, too much dirty, please clean the laser by
laser cleanser timely.
● Do not work under terribly hot or cold environment, please ensure the temperature
in car is in -20℃～60℃.
● During operation, if
appear on LCD, that means unit do not support that
function, operation is invalid.
● When unit is showing some abnormal, please refer to TROUBLE SHOOTING
in this instruction manual, If you cannot find any solution, please press
RESET to resume to initial status.
No image
Change the wiring around
Change battery in remote control
Reconnect lines
INSTRUCTIONS
OTHER PLAY MODE
AUX IN:
AUX IN OPERATION
1) Press “Source” button on remote control or touch “AUX” on the touch screen, to
switch to AUX mode.
2) This will allow you to listen and or watch any source that you have plugged into this
section of the radio.
3) This unit has 1 - Video RCA input & 1 pair of Audio RCA’s for this feature.
CCD (Back-Up Camera)
1) If there is a back-up camera installed onto your car, you will need to connect it to
the CCD video input.
2) When you are backing up the car there you will see this image
on your screen.
3) You can set CCD image according to your car's own position in general setting mode.
INSTRUCTIONS
FEATURES
DVD PLAYER
1. International advanced MPEG-4 DECODE TECHNOLOGY
2. COMPATIBLE WITH MP4 (AVI/DIVX/5.X), DVD(DVD-R/DVD-RW),
VCD, SVCD, CD-RW, WMA, MP3 JPG
3. Multiple subtitles, angles, languages supporting, Child lock function
4. 4 CHANNEL AUDIO OUTPUT MODE
5. PAUSE, PLAY, UP/DOWN, STOP, ZOOM, PBC FUNCTION
6. FM/AM RADIO TUNER
30 RADIO STATION (18FM, 12AM)
BULETOOTH FUNCTION
1. Bluetooth wireless transfers
2. Displaying bluetooth paring and connection status, call status,
and caller's ID
3. Fast performance, fast connection, accurate and sensible search of
devices in range
4. Support A2DP, AVRCP, HS/HF for handing calls and playing music
LCD DISPLAY
1. 7 inch, 16:9 TFT LCD display
2. Touch screen
3. Auto adotoried panel
4. Angle of turn adjustable
INSTRUCTIONS
BASIC OPERATION
1. SOURCE ON/OFF
Press SRC button on panel or PWR button on remote control quickly to power on.
Press SRC button on panel or PWR button on remote control longer to power off.
2. PLAYING SOURCE CHOOSE
Press SOURCE button on remote control, unit will switch sources in the following
sequence: RADIO → DVD → AUX →TV
3. MUTE CONTROL
Press MUTE button on panel or MUTE button on remote control shortly to turn off
sound output, press again to back to sound output.
4. VOLUME ADJUSTMENT
1) Press VOL+/VOL- button on panel, VOL+/VOL- button on remote control or touch
button on display to adjust volume level.
2) The volume setting on this unit is 0 - 39.
TONE MODE ADJUSTING (SEL)
Press SEL button on remote control or SEL button on the panel to choose your desired
tune mode: VOL → BAS → TRE → L/R → F/R
NOTE:
1) DVD playing mode, MBP & User will be automatically activated.
2) After 5 seconds you choose desired mode, do not adjust volume button. The mode
will automatically take you back to status before adjustment.
5. RESET
1) If unit is not working correctly, you should press the RES button. This will reset the
radio and should start working correctly afterwards.
2) After reset, all settings will resume back to the factory default settings.
INSTRUCTIONS
Contact book mode switching
You can touch this button under the Bluetooth mode to select the next mode.
Touch this function key to search the dialed numbers. Each time
this key is touched, the cursor will move to the next dialed number.
Touch this function key to search the received numbers. Each time
this key is touched, the cursor will move to the next received number.
Touch this function key to search the missed numbers. Each time
this key is touched, the cursor will move to the next missed number.
Operations and Settings for the Bluetooth Function
1. Features of the Bluetooth function
1) You can use the function buttons on the unit to receive a call or dial a phone number.
2) You can directly use the hand-free microphone to talk on the phone.
3) You can use the build-in volume control switch to adjust the volume at will.
4) You can switch between the Bluetooth hand-free mode and the cell phone mode.
5) You can use your voice to dial a new number (valid only for cell phones with voice
dialing function).
6) With the Bluetooth function, you can use the Bluetooth microphone in the car to talk
with your folks and friends without having to hold your cell phone, so that your hands
are dedicated for driving, which is safer and law-observing. In the mean time,
agnetic radiation from the cell phone is avoided.
2. Bluetooth match conditions
You can shortly touch the Bluetooth function key
under the main menu to directly
access the Blueetooth interface.
With a cell phone that supports the function of Blueetooth wireless connection, you can
establish a connection between your cell phone and the automobile-loaded unit under
the Bluetooth mode to achieve date exchange and synchronization.
3. Matching and connections between the cell phone and the Bluetooth of the unit
Set your cell phone to the Bluetooth mode, and use the cell phone to search equipments.
After the Bluetooth equipment of the unit is searched, the cell phone will ask you for the
Bluetooth password. Press the unit matching setup button
, and enter the Bluetooth
password (0000) and confirm it, and then the cell phone will ask you whether you
authorize the connection with this equipment or not. Please select “YES”, and the cell
phone will be automatically connected with the said Bluetooth equipment within 30
seconds. “OK LINK” will be displayed on the Bluetooth interface to show that a
connection between the cell phone and the Bluetooth device has been successfully
established. Under and mode (radio, TV, DVD, etc.), if there is an incoming call to your
cell phone which has been stably connected to the Bluetooth device of the unit, the unit
will switch from other mode to the Bluetooth mode after the cell phone rings for about
10 seconds. Current mode will be automatically restored after hang-up.
INSTRUCTIONS
INSTRUCTIONS
BLUETOOTH TOUCH OPERATION (PIC 9)
PANEL ARRANGEMENT
1. Bluetooth hand-free/cell phone
switching
2. Matching function during
Bluetooth connection
3. Voice dialing function
4. Contact book mode switching
5. Return to the main screen
6. Hand-free key
7. Phone number display
8. Hang-up key
9. Delete key
10. Number keys
Functions and Descriptions
Bluetooth hand-free/cell phone switching
If you touch this switching button at the upper-left corner of the screen under the
Bluetooth hand-free mode, the speaker will beep and the hand-free mode will be
switched to the cell-phone mode.
Voice dialing function
If you touch the “Voice dial” button at the lower-left corner of the screen under the
Bluetooth hand-free mode and the cell-phone mode, you will hear the keying tone,
and you can go ahead with the voice dialing function according to the cell-phone
instructions. Eg, if you wish to call someone, you can pronounce his/her name stored
in the cell phone, then ,the name of the person to be called will be played by the
speaker, and the telephone number of this person will be displayed on the screen
and automatically dialed.
To cancel voice dialing
If you wish to disable the voice dialing function in the voice dialing mode, you can press
the “Voice dialing” key again, and this function will be disabled after you hearing the
keying tone.
Hand-free button: After a phone number is keyed in, press this button to call
the user of this phone number. When there is an incoming call. Press this button
to connect this call.
Hang-up button: When there is an incoming call, press this button to hang up
or refuse to connect it.
Delete button: When a wrong digit is keyed in, press this button to delete the
wrong digit.
Number keys: You can use these number keys to enter a phone number.
Phone number display: The phone number that you have just entered is displayed here.
1.
SRC Button
2.
MENU Button
3.
VOL - Button
4.
VOL + Button
5.
MUTE Button
6.
OPEN Button
7.
RESET Button
8.
USB Slot
9.
AUX IN
10.
Remote Control Receiver
11.
MIC input
INSTRUCTIONS
INSTRUCTIONS
BASIC FUNCTION
TV
1. SRC Button
Short press this button to power on . Long press this button to power off .
Touch TV mode of the menu or press SOURCE button on remote control to switch to
TV mode, auto scan and store channels.
Press AMS/RPT button on remote control or SCAN touch button on display to auto
scan TV channels. The range of scan if full TV channel. The channels will auto store into
number button in sequence.
2. MENU Button
Press this button to back to the main menu.
3. VOL - Button
Press this button to reduce the volume.
4. VOL + Button
Press this button to increase the volume.
5. MUTE / TFT on/off Button
Press this button to shut off the sound output, re-press this button can resume the
sound output, long press this button can turn off the TFT LCD display.
6. OPEN Button
Press this button can eject the disc.
7. RESET Button
Press this button and this unit will be restored to the initial state.
8. USB Slot
Connect the USB memory to this socket, and the unit can play music format files
supported by this unit in the USB memory.
9. AUX IN
External connected audio input.
10. Remote control receiver
It is able of receiving infrared signals launched by the remote control matching the nuit.
11. MIC input
Bluetooth MIC input.
1. Switch channel
1) Press SEEK + / SEEK- button on panel or SEEK + / SEEK- on remote control or
touch button on display, unit will skip to previous or next stored channel.
2) Press number button on remote control, unit will skip to appointed channel, for
example, press 6 button, unit will skip to 6 channel. Press 10+, “_ _” will appear on left
top corner of display, press number button 3,9, unit will skip to 39 channel.
2. Manual tuning TV channel
1) Press and hold SEEK + button on panel, SEEK + button on remote control, or
button on display to scan TV channel in increase direction.
2) Press and hold SEEK - button on panel, SEEK - button on remote control, or
button on display to scan TV channel in descending direction.
touch
touch
3. TV sound system switch
Press the AUDI button on the touch screen to switch TV sound system. The sequence is
as follows:
PAL I → PAL DK → PAL BG
4. Blue screen
The display will be blue when there is no signal.
INSTRUCTIONS
INSTRUCTIONS
BASE
TV MODE(PIC 8)
Channal choosing
Press up and down
to switch channel
Back main menu
Press this button
to adjust angles
of the monitor
Mute on/off
Disc open/close
Auto search and
store channel
Audio system change;
press from
PAL I → PAL DK → PAL BG
One press down
to receive frequency
Press this button to
select next channal
Enter
12. SD Slot
TV system
13. Disc Slot
PAL I → SECAM DK → PAL M
NTSC MN ← PAL N
14. Slot indicator light
Function choosing
Press this button to
turn back previous
channal
One press up to
receive frequency
INSTRUCTIONS
INSTRUCTIONS
AUDIO FREQUENCY
MAIN MENU TOUCH OPERATION (PIC 1)
OSD SET
DVD
RADIO
USB/SD
GPS
This function shows that the effect of standard audio output.
TONE
CDC
TV
POWER
BLUETOOTH
AUX INPUT
Note: You can change the timbre of the sound in DVD mode. We suggest keep it in the
original place.
INSTRUCTIONS
INSTRUCTIONS
EQ SETTING
User defined
Rock
Classic
Jazz
Standard
Pop
INSTRUCTIONS
INSTRUCTIONS
MUSIC SURROUNDINGS SETTING (PIC 7)
ADJUST MODE (PIC 3)
Sharp: press / button to adjust
sharp sound high and low
Back main menu
Bass: press / button to
adjust bass level
Volume: press
button to adjust volume
Adjust front and
rear speaker
Adjust left and
right speaker
Passive
Church
EQ mode
From Rock
Off
Exit setup
POP
Classic
Wide
Resume standard video
Concert
Choose the best listening
place; this function will
make you enjoy the best
comfortable sound effects
Loud: press once off LOUD
on, press again to turn off
DBAS on/off: press
once to DBAS on, press
again to DBAS off
Live
Note: This function only is used with the remote control in CD/MP3/USB/SD mode.
Once you have one of these settings on. You will no longer have Bass & Treble
adjustments until this feature is set to off.
INSTRUCTIONS
INSTRUCTIONS
10. CD Program Play
In CD mode, you can set the sequence of playing by the program function, the operation
is as follows:
When CD is playing, press ST/PROG button, then the display shows:
PROG
TC
1 _ _ : _ _
TC
5 _ _ : _ _
TC
_ _ : _ _
TC
13 _ _ : _ _
2 _ _ : _ _
6 _ _ : _ _
10 _ _ : _ _
14 _ _ : _ _
3 _ _ : _ _
4 _ _ : _ _
7 _ _ : _ _
8 _ _ : _ _
PLAY
11 _ _ : _ _
12 _ _ : _ _
DELETE
15 _ _ : _ _
16 _ _ : _ _
REMOTE CONTROL FUNCTION
4. SOURCE Button
Press this button to choose audio sources.
5. EQ Button
Press this button to choose POP, ROCK, EQ off.
6. SEEK + (
) / SEEK - (
) Button
Press this button to manual turning, speed
or quick back, previous song and next song.
Input the number of the song you want to program by the remote control, program the
first song, input your desired song, for example, the sixth song, and press number button
6 on the remote control. Program the second song, press
button move the cursor to
. Input your desired song, for example, the ninth song, press number button 9 on
the remote control. Press
button to program play.
Back to the normal mode, press the ST/PROG button, then press
button.
Note: This function can only be worked by the remote control.
7. VOL + (
) / VOL - (
Press this button to increase or decrease
volume level.
8. SEL Button
Press this button to choose sound feature.
11. MP3 Program Play
In MP3 mode, you can set the sequence of playing by the program function, the
operation is as follows:
When MP3 is playing, press ST/PROG button, then the display shows:
PROG
TC
1 _ _ : _ _
TC
5 _ _ : _ _
TC
_ _ : _ _
TC
13 _ _ : _ _
2 _ _ : _ _
6 _ _ : _ _
10 _ _ : _ _
14 _ _ : _ _
3 _ _ : _ _
4 _ _ : _ _
7 _ _ : _ _
8 _ _ : _ _
PLAY
11 _ _ : _ _
12 _ _ : _ _
DELETE
15 _ _ : _ _
16 _ _ : _ _
Then, input desired song by remote control.
For example: Program the first song, input 01, press
button move the cursor to the
second lattice, input desired song, for example the third song. Program the second song,
press button, work with button, move the cursor to 2
. Input 01, press button
move the cursor to the second lattice, input desired song, for example, the sixth song
(press 6). Press
button to program play.
Back to the normal mode, press the ST/PROG button and then press
button.
Note: This function can only be worked by the remote control.
9. LOUD Button
Press this button to startup LOUD function.
10. BAND - P/N Button
In radio mode, press this button to choose band.
In VCD, DVD mode, press this button to choose
AUTO, PAL or NTSC system.
11. LOC/RDM Button
In radio mode, press this button to switch
between local and direction. In VCD, CD mode,
press this key to randomly play.
1. POWER
Press once to switch on, press again to
switch off.
2. MUTE Button
Press once to turn off audio output,
press again to resume volume level.
3. DSP
Press this button to show the time.
12. STOP Button
Press this button to stop playing.
13. PLAY/PAUSE Button
Press this button to switch between play and
pause. In stop mode, press this button to play.
14. ST/ PROG Button
In radio mode, press this button to choose
stereo or mono station. In audio mode, it
can help STOP button to programmed play.
INSTRUCTIONS
INSTRUCTIONS
15. 0 - 10 + Button
Press this button to choose desired song,
section, preset stations.
* Decimal numbers, for example the 19th
song, press 1,9 button;
* Centesimal numbers, for example, the
120th song, press 1,2,0 button.
24. ANGLE Button
In DVD mode, press this button to change
play angle.
16. AMS / RPT Button
In radio mode, press this button to browse
stored stations. In audio mode, press this
button to play repeatedly.
26. OSD Display
Press this button to display the title chapter
and the left time.
17. TITLE Button
In DVD mode, press this button to play
back to the top menu of disc.
18. AUDIO Button
In DVD mode, press this button to switch
language of dialogue. In VCD mode, press
this button to choose left track, right track,
and stereo.
19. SET Playing Time
In DVD mode, press this button, you can
define playing time.
25. SETUP Button
In audio mode, press this button to choose
different set items.
27. ZOOM Button
In DVD/VCD mode, press this button to
ZOOM in. In CD/MP3/USB/SD mode,
press this button to choose EQ.
28. MENU Button
Press button to back to the main menu.
BATTERY CHANGE
When control distance of remote control
becomes shorter or no function, please
change battery. Please confirm polarity
before change.
One hand press stopper, then pull out battery.
20. SUBTITLE Button
In DVD mode, press this button to switch
language of subtitle.
21. PBC Button
In VCD mode, press this button to display
all song menus, work with number button
to choose songs.
22. UP, DOWN, LEFT, RIGHT, ENTER
Button
In DVD mode, press this button to move
cursor up, down, left, right to choose item
in menu. Press the enter button to confirm
choice.
23. SLOW Button
In audio mode, press this button to slow
backward and slow forward.
CD/MP3 BASIC OPERATION (Look at Picture #4)
Slide in CD/MP3 disc, unit will play it automatically. If disc is in slot, press DVD touch
button on main menu can to play.
1. Repeat Play
In CD/MP3 mode, press AMS/RPT button on remote control, to startup following, repeat
CD disc: Single song repeat→ Repeat play off.
MP3 disc: Single song repeat→Directory repeat→ Repeat play off.
2. Fast Forward/Fast Rewind
Press SEEK + / SEEK - button on remote control, or
speed forward or backward playing.
Note: Hold above button a bit longer to operate.
touch button on display to
3. Previous/Next Song Play
In playing mode, press SEEK + / SEEK - on remote control, or
display to choose previous/next song.
4. Pause Play
In play mode, press
button on remote control, or
Press again to go back to normal play.
touch button on
button on display to pause.
5. Stop Play
In play mode:
1) Press
button on remote control to enter the pause mode, the position will be stored
in unit. At that time, press
button on remote control or touch button on display to
resume playing at the stored position.
2) Press
button on remote control twice to enter into stop mode, here, press
button on remote control or touch button on display, unit will play from the first song.
6. OSD
In playing mode, short press OSD on remote control to show all information of present
disc.
Put battery into controller.
7. Randomly Play
In CD mode, press LOC/RDM button on remote control, to instantly play each song.
Press again to back to the normal play.
Insert battery holder into controller.
8. EQ Mode
1) This function can only be worked by remote control.
2) When playing CD/MP3, press the “ZOOM” button on the remote control, you can
choose the sound mode.
3) When enter this function, press the button / / / to move the course to select
sound mode which in the system menu, after your selection position will show red color
to indicate the confirmation.
9. OPEN
Press OPEN button on panel to eject disc.
INSTRUCTIONS
INSTRUCTIONS
15. VCD Program Playing
In VCD mode, you can set playing sequence of songs by program play function.
The program playing operation steps are as follows:
In VCD mode, press ST/PTOG button, display will show:
PROG
TC
1 _ _ : _ _
TC
5 _ _ : _ _
TC
_ _ : _ _
TC
13 _ _ : _ _
2 _ _ : _ _
6 _ _ : _ _
10 _ _ : _ _
14 _ _ : _ _
3 _ _ : _ _
4 _ _ : _ _
7 _ _ : _ _
8 _ _ : _ _
PLAY
11 _ _ : _ _
12 _ _ : _ _
DELETE
15 _ _ : _ _
16 _ _ : _ _
LOADING
Input the songs which you want to programmed by the number buttons on remote
control. For example: Program the first song, input your desires song, for example, the
fourth song, and press number button 4 on the remote control. Program the second song,
press button move the cursor to 2
. Input your desired song, for example, the
eighth song, press number button 8 on the remote control. Press
button to program
play. Back to the normal mode, press the ST/PROG button, then press
button.
Note: This function can only be worked by the remote control.
This white bar shows the rate
of process of loading a disc.
Note: When loading a disc, touch screen function can not be used.
INSTRUCTIONS
INSTRUCTIONS
8. OSD
In playing mode, short press OSD on remote control to show all information of present
disc.
DISC PLAY TOUCH OPERATION (PIC 4)
9. Number Buttons
In VCD mode, press 0-9 number button to input song. For example, you want to choose
13th song, press 10+ button, and then press 3 button once to play 13th song.
Note: This function can only be worked by the remote control.
10. Repeat Play
In playing mode, press AMS/RPT button on remote control, to startup following, repeat
function. Single song repeat→ Repeat play off.
Note:
1) When playing VCD disc, if PBC is on, no repeat function.
2) After unit is power off or mode is switched to other playing mode except VCD mode.
if you switch back to VCD mode, repeat playing will be cancelled.
Touch this area to
enter & exit main
menu.
11. Randomly Play
In VCD mode, press LOC/RDM button on remote control, to instantly play each song.
Press again to back to the normal play.
Note: When VCD disc, if PBC is on, RDM will not work.
MP3 mode, press this button so
you can move the cursor to
left/right/up/down and select the
songs which in the system menu
DVD mode, press
this area to show
function icons
12. Switch Track
In VCD mode, press AUDIO button on remote control to switch track as following
sequence:
Stereo
Right
Left
13. OPEN
Press OPEN button on panel to eject disc.
Touch option:
next song;
previous songs;
adjust monitor angles;
Pls refer to Pic 5 when touch “SET” button;
There is a yellow remind when touch any
button.
You can select “X2→X4→X8→X16→X20→Play”
to speed up when you press this button
You can select “X2→X4→X8→X16→X20→Play”
to backward when you press this button
14. PBC (MENU) Play
In VCD mode, press this button then play the PBC and display will show whole menu
in disc, work with number button to choose song. When you are playing either song
of the PBC, and you want to stop to select another song, press the button to turn off.
Note:
1) This function can be worked by the control.
2) PBC is suitable for the SVCD and VCD 2.0 disc.
3) In PBC mode, you can not press number button only to choose song.
INSTRUCTIONS
INSTRUCTIONS
VCD BASIC OPERATION (Look at picture #4)
DVD MODE (PIC 5)
Slide in the VCD disc, it will play it automatically. If the disc is in slot, press DVD touch
button on main menu can to play.
AUDIO SETTING ON TOUCH SCREEN
1. Pause Play
In playing mode, press
button on remote control, or
Press again to back to normal play.
on display to pause.
2. Stop Play
In playing mode, 1) Press
button on remote control to enter the pause mode, the
position will be stored in unit. At that time, press
button on remote control or touch
button on display to resume playing at the stored position.
2) Press
button on remote control twice to enter into stop mode, here, press
button
on remote control or touch button on display, unit will play from the first song.
3. Fast Forward/Rewind Function
In playing mode, press SEEK + button on remote control, or
touch button on display
to speed play.
When you need quick back, press SEEK - button on remote control, or
touch button
on display to quick back play.
Note: Hold above button a bit longer to operate.
4. Previous/Next Song Play
In playing mode, press SEEK + / SEEK - on remote control, or
display to choose previous/next song.
touch button on
Audio selection:
VOL → BAS → TRE → BAL → FAD
When using this function, the position
bar will be highlighted.
5. Switch System
In playing mode, short press the BAND/P/N button on remote control, to select PAL,
AUTO, NTSC TV system.
Note: This function can only be worked by the remote control.
Change the
listening position
6. Slow Play
Press SLOW button on remote control to slow play. The level of slow playing is as follows.
SLOW 1/3
SLOW 1/4
SLOW 1/5
Sequence is : SLOW 1/2
PLAY
SLOW 1/7
SLOW 1/6
Note: This function can only be worked by the remote control.
7. Zoom In / Zoom Out
Press ZOOM button on remote control to zoom in / zoom out the picture. The levels are
as follows:
ZOOM IN 1/2
ZOOM IN 2
ZOOM IN 3
ZOOM IN 4
ZOOM IN 1/4
ZOOM IN 1/3
ZOOM IN OFF
Note:
1. This function can only be worked by the remote control.
2. Image which is zoomed in can be moved by up/down/left/right cursor to move.
3. Image which is zoomed out cannot be moved.
EQ mode: Touch the button
to change settings:
ROCK → POP → CLASSIC → OFF
Loud choosing: this function is defined
open, when it is touched at the first time,
the loud function will be closed, at the
same time, yellow light disappear.
Bass choosing: when
touched the button will be
yellow, touch this button
to exit, touch it again to
resume.
INSTRUCTIONS
INSTRUCTIONS
VIDEO SETTING ON TOUCH SCREEN
DIGITAL SETUP
1. Press
You can choose: Brightness, Contrast, Color,
Hue, adjust the image effect according to
your sight. The blue bar will show your level.
or
button
2. Press
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
EXIT SETUP
button, then to enter.
OP MODE
DYNAMIC RANGE
DUAL MONO
LINE OUT
RF REMOD
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
FULL
6/8
4/8
2/8
OFF
EXIT SETUP
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
DIGITAL SETUP
DIGITAL SETUP
Image mode: You can choose the area in the
broken line on the panel, standard, defined,
soft, according what you need to choose,
the blue back light will disappear.
EXIT SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
Video mode: When using this
function, the position will be darker
on the screen.
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
STEREO
MONO L
MONO R
MIX MONO
INSTRUCTIONS
INSTRUCTIONS
VIDEO SETUP
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
EXIT SETUP
VIDEO SETUP
12
10
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
EXIT SETUP
INSTRUCTIONS
INSTRUCTIONS
VIDEO SETUP
1. Press
or
button
2. Press
VIDEO SETUP
button, then to enter.
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
EXIT SETUP
VIDEO SETUP
12
10
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
EXIT SETUP
VIDEO SETUP
12
10
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
EXIT SETUP
+6
+4
+2
-0
-2
-4
-6
INSTRUCTIONS
INSTRUCTIONS
RADIO OPERATION (Please look at picture #6)
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
ENGLISH
GERMAN
SPANISH
FRENCH
PORTUGUESE
LATIN
ITALIAN
EXIT SETUP
AUDIO SETUP
1. Press
or
button
2. Press
AUDIO SETUP
AUDIO OUT
KEY
button, then to enter.
AUDIO SETUP
AUDIO OUT
KEY
EXIT SETUP
SPDIF/OFF
SPDIF/RAW
SPDIF/PCM
AUDIO SETUP
AUDIO SETUP
AUDIO OUT
KEY
EXIT SETUP
EXIT SETUP
FM1
FM2
AM2
FM3
AM1
2. Adjust Frequency
Manually Adjust Frequency:
Press SEEK + button on remote control, or
touch button on display shortly every time,
frequency will increase one step by one step till you get desired frequency. Press SEEK button on remote control, or
touch button on display shortly every time, frequency
will decrease on step by step till you get desired frequency.
Search Station:
Press SEEK + / SEEK - button on remote control, or
touch button on display
shortly every time to search station in up/down direction. When get one station, it will
auto stop searching.
3. Browse / Auto Search and Store Station
1) In radio mode, press AMS/RPT button on remote control, or APS button on display
shortly to browse preset station on 1-6;
2) In radio mode, press AMS/RPT button on remote control, or APS button on display
longer to auto search in whole band from present frequency and store 6 most strong
frequency on 1-6;
3) This unit has FM1, FM2, FM3, AM1, AM2 Bands. Each band can store 6 stations,
so a total 30 preset stations.
Note: After preset station, unit will cancel the former preset stations.
EXIT SETUP
AUDIO OUT
KEY
1. Band Selection
In radio mode, press BAND button, BAND/P/N button on remote control, or touch
position on screen every time to choose band, the sequence is as follows:
+4
+2
-2
-4
4. Mono/Stereo Selection
In radio mode, press ST/PTOG button on remote control or ST touch position on display
to choose mono/stereo program.
Note: In radio mode, start up the stereo function automatic, touch the ST button again on
the display, the TFT display will show the ST OFF & MOMO mark, that is to turn off the
stereo. When the right under foot appear the MONO mark, it show the MONO on.
5. Manual Preset and Store Station
In radio mode, press 1-6 button on remote control, or 1-6 position on display longer to
store preset frequency into preset channel. For example, the present frequency is
89.8MHz, press 2 button longer, then 89.8MHz frequency is stored in 2 channel.
INSTRUCTIONS
INSTRUCTIONS
DVD BASIC OPERATION (Please link with touch operation at pic 4)
LANGUAGE SETUP
Slide in DVD disc, unit will play it automatically. If disc is in slot, press DVD touch
button on main menu to play disc.
1. Press
1. Pause Play
In playing mode, press
button on remote control, or
Press again to go back to normal play.
or
button
2. Press
LANGUAGE SETUP
on the display to pause.
2. Stop Play
In playing mode, 1) Press
button on remote control to enter the pause mode, the
position will be stored in unit. At that time, press
button on remote control or touch
button on display to resume playing at the stored position.
2) Press
button on remote control twice to enter into stop mode, here, press
button on remote control or touch button on display, unit will play from the first song.
3. Fast Forward/Fast Backward Play
In playing mode, press SEEK + button on remote control, or
touch button on display
to speed play.
When you need quick back, press SEEK - button on remote control, or
touch button
on display to quick back play.
Note: Hold above button a bit longer to operate.
4. Previous/Next Song Play
In playing mode, press SEEK + / SEEK - on remote control, or
display to choose previous/next song.
button, then to enter.
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
EXIT SETUP
LANGUAGE SETUP
ENGLISH
GERMAN
SPANISH
FRENCH
PORTUGUESE
LATIN
ITALIAN
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
EXIT SETUP
touch button on
ENGLISH
GERMAN
SPANISH
FRENCH
PORTUGUESE
LATIN
ITALIAN
5. Switch System
In playing mode, short press the BAND/P/N button on remote control, to select PAL,
AUTO, NTSC TV system.
Note: This function can only be worked by the remote control.
LANGUAGE SETUP
6. Slow Play
Press SLOW button on remote control to slow play. The level of slow playing is as
follows. Sequence is : SLOW 1/2
SLOW 1/3
SLOW 1/4
SLOW 1/5
PLAY
SLOW 1/7
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
EXIT SETUP
SLOW 1/6
Note: This function can only be worked by the remote control.
7. Zoom In/Zoom Out
Press ZOOM button on remote control to zoom in / zoom out the picture. The levels are
ZOOM IN 1/2
as follows:
ZOOM IN 2
ZOOM IN 3
ZOOM IN 4
ZOOM IN OFF
ZOOM IN 1/4
ZOOM IN 1/3
Note:
1. This function can only be worked by the remote control.
2. Image which is zoomed in can be moved by up/down/left/right cursor to move.
3. Image which is zoomed out cannot be moved.
ENGLISH
GERMAN
SPANISH
FRENCH
PORTUGUESE
LATIN
ITALIAN
INSTRUCTIONS
INSTRUCTIONS
SYSTEM SETUP
SYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
EXIT SETUP
9. Repeatedly Play
In play mode, press AMS/RPT button on remote control to start up follow repeat
function.
Repeat (section)
Repeat (chapter)
Repeat (off)
Note:
1. After input code “0000” press ENTER button to
turn on child lock;
2. Move cursor to level item, choose desired level;
3. Only child lock is in can you choose.
SYSTEM SETUP
SYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
EXIT SETUP
SYSTEM SETUP
1. KID SAFE
2. G
3. PG
4. PG 13
5. PG-R
6. R
7. NC-17
8. ADULT
SYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
EXIT SETUP
8. OSD
In playing mode, short press OSD on remote control to show all information of present
disc.
RESTORE
10. Angle Switch
If the DVD disc is recorded with multi-angles, you can press the ANGLE button to
switch the angle during playing.
The sequence is as follow:
ANGLE 1 → ANGLE 2 → ANGLE 3
Note:
1. It just can be worked by the remote control.
2. It is only for the DVD disc which has multi-angle.
3. If there is a
sign on the cover of the DVD disc. The number in the sign means
how many angles the disc has.
4. You can not switch the angle when slow playing.
11.Multi-Audio
There are different languages of dialogue and audio systems in DVD disc.
If the DVD disc is recorded with multi-audio, you can switch the language of dialogue
and the audio systems when playing.
Press the AUDIO button repeatedly to change the language of dialogue.
Note
1. It just can be worked by the remote control.
2. It is only for the DVD disc which has multi-language.
3. If there is a
sign on the cover of the DVD disc,
means that it was recorded
by multi-language/audio system.
4. In VCD mode, press the AUDIO button to select the L/R or STEREO track.
12.Multi-Subtitle
If the DVD disc is recorded with multi-subtitle, you can switch the languages of subtitle.
Press the sub-t button repeatedly to change the language.
Note:
1. It just can be worked by the remote control.
2. It only for the DVD disc which is recorded with multi-wubtitle.
3. If there is a
sign on the cover of the DVD disc
means theat it has several
subtitle.
13. Title Select
In DVD mode, press TITLE button to back to the title menu. Display shows all the titles
of the disc. You can select the chapter you want by the cursor, press play button to play
the chapter.
Note: It just can be worked by the remote control.
INSTRUCTIONS
INSTRUCTIONS
14. MENU Select
In playing mode, press PBC button on remote control to back to the menu, display will
show chapter and section in disc. Work with / button on remote control or touch
button on display to choose your desired song. Press
button / ENTER button to play.
Note: This function can only be worked by the remote control.
OPEN: Press OPEN button on panel to eject disc.
15. Program Play
In DVD mode, you can set the sequence of playing by the program function, the operation
is as follow:
PROG
TC
1 0 1 : 0 3
2 0 1 : 0 6
3 _ _ : _ _
4 _ _ : _ _
TC
5 _ _ : _ _
TC
9 _ _ : _ _
TC
13 _ _ : _ _
6 _ _ : _ _
10 _ _ : _ _
14 _ _ : _ _
7 _ _ : _ _
8 _ _ : _ _
PLAY
11 _ _ : _ _
12 _ _ : _ _
DELETE
15 _ _ : _ _
16 _ _ : _ _
When DVD is playing, press ST / PROG button, then display shows:
For example, program the first song, input 01, press button move the cursor to the
second lattice, input desired song, for example, the third song. Program the second song,
press button, move the cursor to 2
. input 01, press button move the cursor to
the second lattice, input desired song, for example, the 6th song (press 6). Press button
to program play. Back to the normal mode, press the ST/PROG button, then press
button.
Note: This function can only be worked by the remote control.
16. Digital Album
Play the disc contains JPEG pictures, read the picture menu first.
1. Press button on remote control, the pictures will be browsed automatically. (It also
can be worked to press number 6 button on the unit.)
2. Press ENTER button on the remote control, it can be manual browsed by SEEK + and
SEEK -.
3. ZOOM in picture function: During auto browsing, press pause button stop the screen,
press ZOOM button to zoom in or zoom out the picture. During manual browsing, you
can press ZOOM button to zoom in or zoom out picture directly.
4.Under zoom in picture, you can move the picture by
Note: You can not move picture in normal mode and zoom out mode.
17. Setup
Press SETUP button, display will show the system setup menu and the submenu, select
the item you want by
, after selecting the proper item, press / / / to press
ENTER to confirm.
Note:
1. It just can be worked by the remote control.
2. Some function setting maybe different because of the different model or disc.
3. If the selected language is not recorded in the disc, then unit will show the appointed
language,
4. About the “SETUP”, please read the follow.
Press “SETUP” on the remote control, it will appear the following touch menu:
SYSTEM SETUP
1. Press
or
button
2. Press
SYSTEM SETUP
button, then to enter.
SYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
EXIT SETUP
SYSTEM SETUP
NTSC
PAL
AUTO
SYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
EXIT SETUP
SYSTEM SETUP
S-VIDEO
SYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
EXIT SETUP
4:3 PS
4:3 LB
16:9

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Creation Date--Text             : 
Producer                        : Corel PDF Engine Version 1.0.0.458
Mod Date--Text                  : 
Format                          : application/pdf
Creator                         : 郭吉军
Title                           : 9268(UI_3)_带后蓝牙+RDS带刹车+TV(EN)未转曲
Creator Tool                    : CorelDRAW 版本 12.0
Modify Date                     : 2009:09:02 17:51:29+08:00
Metadata Date                   : 2009:09:02 17:51:29+08:00
Document ID                     : uuid:b1d28e13-1038-4576-aa25-7d3b89639387
Instance ID                     : uuid:59b681c7-5cff-4a67-a737-89a7c27df4be
Page Count                      : 24
Create Date                     : D:20090724093900
Author                          : 郭吉军

EXIF Metadata provided by EXIF.tools