SOLING SL8XX8 BLUETOOTH WIRELESS DEVICE User Manual USERS MANUAL 3

Download:
Mirror Download [FCC.gov]
Document ID	916743
Application ID	zoOW0I2VJfIrIoCuP6S2XA==
Document Description	USERS MANUAL 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	130.56kB (1631950 bits)
Date Submitted	2008-03-19 00:00:00
Date Available	2008-03-19 00:00:00
Creation Date	2008-03-17 14:44:26
Producing Software	PDF
Document Lastmod	2008-03-17 14:44:40
Document Title	USERS MANUAL 3

INSTRUCTIONS
RADIO TOUCH OPERATION (PIC 6)
98 OOMHZ lllliG. OOMHZ
. 87. soMHzl 90. oomnz
87.50MMZ. . .1§| I
zill.‘lllil“ w!
fi'l |W nos. oomuzl 87 50MHlelm
.ll:.Hl.MH!HHHillw.b.‘ I"
AMOO 20 6 ‘ MONO
Touch this button everytime, it
will appear zFMl—DFMZ —>
FMS—bAMl —MM2 in order
Adjust the
monitor angels
Press this button to close stereo
output, re-press thisbutton to
resume stereooutput
Press this button steply can switch
to: Rock +Pop+ Classic—bClose
At radio state , press this button to auto
scan radio stations in the whole band
area and auto pro-store the strongest
radio stations
Press this button to exit balance left
Short press this button, decrease _ ‘
FM/AM radio frequency steply; Long 6: fight speaker function, re-press
press this button, auto scan FM/AM 3115th to “53111“er left
radio stations award to radio decreased & fight speaker funchon
direction
Pressttfisbutlnontoadjusteach
function; (Details, plsrefertoPic3)
Short press this button, increase
FM/AM radio frequency steply; Long
press this button, auto scan FM/AM
radio stations award to radio increased
direction
18
INSTRUCTIONS
7. Zoom in/Zoom out
Press ZOOM button on remote control to zoom in [zoom out the picture. The levels are
as follows:
ZOOMIN2 —b ZOOMIN3 —>ZOOMIN4—DZOOMIN 112
L ZOOMINOFF4—ZOOMIN1/44_ Z()()l’\0fll"11.f3"J
Note:
1. This function can only be worked by the remote control.
2. Image which is zoomed in can be moved by up/down/left/right cursor to move.
3. Image which is zoomed out cannot be moved.
8.0SD
In playing mode, press OSD touch button on display to display the position and time of
present song.
9.Number button
In VCD mode, press 0—9 number button to input song. For example, you want to choose
13th song , press 10+ button ,and then press 3 button once to play 13th song.
Notezthis function can only be worked by the remote control.
10.Repeatedly play
In playing mode, press AMS/RPT button on remote control , to startup following
repeat function. Single song Repeat—wepeat play off.
Note:
1)When playing VCD disk, if PBC is on, then, no repeat function.
2) After unit is power off or mode is switched to other playing mode except VCD mode,
if you switch back to VCD mode, repeat playing will be cancelled.
3) This function can only be worked by remote control.
11.Randomly play
In VCD mode, press LOC/RDM button on remote control, to instantly play each song.
Press again to back to the normal play.
Note: When playing VCD disk, if PBC is on, RDM will not work.
12. Switch Track
In VCD mode, press AUDIO button on remote control, to switch track as
following sequence:
Left —> right —> stereo
l—I
13 OPEN
Press OPEN button on panel to eject disk.
31
INSTRUCTIONS
VCD BASIC OPERATION (Pls link with touch operation at pic4)
Slot in VCD disk, unit will play it automatically. If disk is in slot, press MODE button
on panel to switch to DVD LOADING mode to play.
1.Pause play
In playing mode, press m button on remote control, or "- touchbutton on display to
pause. Press again to back to normal play.
2.Stop play
In playing mode,1) press I/5 button on remote control to enter the pause mode, the
position will be stored in unit. At that time, press n: button on remote control or touch
button on display to resume playing at the stored position.
2)press 4: button on remote control twice to enter into stop mode,here, press nu button
on remote control or touch button on display, unit will play from the first song.
3. Speed forward/backward play
In playing mode, press SEEK+ button on remote control. or » touch button on
display to speed play.
When you need quick back, press SEEK— button on remotecontrol, or « touch button
on display to quick back play.
Note: Hold above button a bit longer to operate.
4. Previous/next song play
In playing mode, pressSEEK+/SEEK- on remote control,or »I / I« touch button on
display to choose previous/next song.
5. Switch system
In playing mode, shortly press the band/p/n button on remote control, to select
PAL, AUTO, N’ISC TV system.
Note: this function can only be worked by the remote control.
6. Slow play
Press SLOW button on remote control to slow play. The level of slow playing is as follows.
Sequence 1s : sww 1,2_.5L0w 1,3 —>srow1l4 —> sww 1/5
PLAY <— srow 1/7<— SLOW 1/6 4—J
Note: this function can only be worked by the remote control.
30
INSTRUCTIONS
RADIO OPERATION (Pls link with touch operation at pic6)
1.Band Selection
In radio mode, press Band button , BAND/PIN button on remote control,or touch
position of switch bank position every time to choose band, the sequence is as follows:
FM1—’ FM2 —' FM3 —’AM1
1— AM2‘—|
2. Adjust frequency
Manually adjust frequency:
Press SEEK+ button on remote control, or »I touch button on display shortly every time,
frequency will increase one step by one step till you get desired frequency.
Press SEEK- button on remote control, or |« touch button on display shortly every time,
frequency will decrease one step by one step till you get desired frequency.
Search station:
Press SEEK+/SEEK- button on remote control, or »|/|« touch button on display shortly
every time to search station in up/down direction. When get one station, it will auto stop
searching.
3.BrowselAuto search and store station
1)In radio mode, press AMS/RPT button on remote control,or AMS button on display
shortly to browse preset station on 1—6
2)In radio mode, press AMS/PRT button on remote control, or AMS position on display
longer to auto search in whole band from present frequency and store 6 most strong
frequency on 1-6.
3)This unit has FMl ,FM2,FM3,AM1,AM2 band. Ead'i bank can preset 6 stations, total
30 preset stations.
Note: After preset station, unit will cancel the former preset stations.
4.MonolStereo Selection
In radio mode, press ST/PROG button on remote control or ST touch position on display
to choose mono/stereo programme.
Note: In radio mode, start up the stereo function Automatic, touch the ST button again
on the display, the TFT display will show the ST OFF &:MONO mark, that is to turn off
the stereo. When the Right under foot appear the MONO mark ,it show the MONO on.
5.Manual preset and store station
In radio mode, press 1-6 button on remote control,or 1-6 position on display longer to
store preset frequency into preset channel. For example, the present frequency is
89.8MHz, Press 2 butt0n longer, then89.8MHz frequency is stored in 2 charmel.
1 9
INSTRUCTIONS
DVD BASIC OPERATION (Pls link with touch operation at pic4)
Slot in DVD disk, unit will play it automatically. If disk is in slot, press MODE button
on panel to switch to DVD LOADING mode to play.
1.Pause play
In playing mode, press u. button on remote control, or n. touchbutton on display to
pause. Press again to back to normal play.
2.Stop play
In playing mode,1) press -/ 3 button on remote control to enter the pause mode, the
position will be stored in unit. At that time, press nu button on remote control or touch
button on display to resume playing at the stored position.
2)press -f> button on remote control twice to enter into stop mode,h , press nu button
on remote control or touch button on display, unit will play from the first song.
3. Speed forward/backward play
In playing mode, press SEEK+ button on remote control, or » touch button on
display to speed play.
When you need quick back, press SEEK— button on remotecontrol, or « touch button
on display to quick back play.
Note: Hold above button a bit longer to operate.
4. Previous/next song play
In playing mode, pressSEEK+/SEEK- on remote oontrol,or ”I / H4 touch button on
display to choose previous/next song.
5. Switch system
In playing mode, shortly press the band/p/n button on remote control, to select
PAL, AUTO, NTSC TV system.
Note: this function can only be worked by the remote control.
6. Slow play
Press SLOW button on remote control to slow play. The level of slow playing is as follows.
Sequence rs : . swwmfismw 1,3 —-suow1/4—-sr.ow 115
my <— swwuw— 5Low 1/6 ._l
Note: this function can only be worked by the remote control.
7. Zoom in/Zoom out
Press ZOOM button on remote control to zoom in [zoom out the picture. The levels are
as follows:
ZOOM m 2 —> ZOOM IN 3 —b ZOOM IN 4—D ZOOM IN 112
L ZWMNOFF‘—ZOOMIN114‘— MNIB‘J
Note:
1. This function can only be worked by the remote control.
20
SPEAKER SETUP
P mm
Stereo
Exit setup
‘
INSTRUCTIONS
SPEAKER SETUP
Downmix
Exit senip
DIGITAL SETUP
OPmode P
Dynamic range RF REMOD
Dual mono
Exit setup
DIGITAL SETUP
OP mode
Dynamic range
Dual mono
Exit setup
DIGITAL SETUP
OP mode
. : l I . {We
> we
MONO I.
MONO R
MIX MONO
Exit senip
DIGITAL SETUP
OP mode
Dynamic range
Dual mono
Notezsame as above
29
VIDEO SETUP ‘
> -
Contrast — VIDEO SETUP
Hue :
Saturafion _ Brightness
W” " Cmttrast
_ Hue
Sharpness _
Exit setup :
‘ m setup
VIDEO SETUP ‘
B mess VIDEO SETUP
Contrast y _
Hue — Brightness
Seturatiou - Contrast
Sharpness : Hue
— Saturation
' El
Exit setup
‘ Exit setup
VIDEO SETUP
VIDEO SETUP
Brightness
Contrast Wm
Hue — Contrast
Saturation : Hue tion
as : Sharpness
Exit setup
28
Notezsame as above
INSTRUCTIONS
2. Image which is zoomed in can be moved by up/downfleft/right cursor to move.
3. Image which is zoomed out cannot be moved.
8.0SD
In playing mode, short press OSD on remote control to show all information of present disk.
9.Repeated1y play
In playing mode, press AMS/RPT buttOn on remote control to start up follow repeat
function. _
Repeauchapter) —» Repeat(sectlon) —> Repeat(o£t)
1—1
10. Angle switch
If the DVD disc is recorded with multi— angles, you can press the ANGLE button to switch
the angle during playing.
The sequence is as follow:
ANGLE 1)—> ANGLE 2 —> ANGLE 3
Note:
1.It just can be worked by the remote control.
2.It is only for the DVD disc which has multi-angle.
3.If there is $54 sign on the cover of the DVD disc.The number in the sign means how many
angles the disc has.
4.You can not switch the angle when slow playing.
11.Mulh'-audio
There are different languages of dialogue and audio systems in DVD disc.
If the DVD disc is recorded with multi-audio,you can switch the language of dialogue and
the audio systems when playing.
Press the AUDIO button repeatedly to change the language of dialogue.
Note:
1.It just can be worked by the remote control.
2.It is only for the DVD disc which is recorded with multi-language.
3.If there is a ®D sign on the cover of the DVD disc, (9) means that it was recorded by multi
—1anguage/audio system.
4.In VCD mode,press the AUDIO button to select the UK or STEREO track.
12.Mu1ti-subtitle
If the DVD disc is recorded with multi-subtitle, you can switch the languages of subtitle.
Press the sub-t button repeatedly to change the language.
Note:
1.It just can be worked by the remote control.
2.It only for the DVD disc which is recorded with multi-subtitle.
3.If there is a. sign on the cover of the DVD disc, means that it has several subtitle.
13.Title select
In DVD mode, press TTI'LE button to back to the title menu. Display shows all the titles of the
disc. You can select the chapter you want by the cursor, press play button to play the chapter.
Note: It just can be worked by the remote control.
21
INSTRUCTIONS
14.MENU select
In playing mode, press PBC button on remote control to back to the menu, display will show
chapter and section in disk.Work with A [7 button on remote control or touch button on
display to choose your desired song.Press A button [ENTER button to play.
Note: this function can only be worked by the remote control.
OPEN: press OPEN button on panel to eject disk.
15.Program play
In DVD mode, you can set the sequence of playing by the program function,the operation is
as follow:
When DVD is playingpress ST/PROG button,then the display shows:
For example, program the first song, input 01, press > button move the cursor to the second
lattice,input desired song, for example, the third song. Program the second song, press V
button , move the cursor to 2 EL _ . input 01, press b button move the cursor to the second
lattice, input desired song, for example, the 6th song( press 6). Press u button to program play.
Back to the normal mode, press the ST/PROG button, then press .. button.
Note: this function can only be worked by the remote control.
16.Digita1 album
Play the disc contains JPEG pictures, read the picture menu first.
1.press u button on remote control, the pictures will be browsed automatically.( It also can be
worked to press number 6 button on the unit.)
2.press ENTER button on the remote control, it can be manual browsed by seek+ and seek- .
3.ZOOM in picture ftmctionzDuring auto browsing, press pause button stop the screen, press
Zoom button to zoom in or zoom out the picture. During manual browsing, you can press
Zoom button to zoom in or zoom out picture directly.
4.Under zoom in picture, you can move the picture by 4:r .
NotezYou can not move picture in normal mode and zoom out mode.
17.Set up
Press SETUP button, display will show the system set up menu and the submenu, select the
item you want by<:>,after selecting the proper item, press A / V / < / v to press ENTER to
confirm.
Note:
1.It just can be worked by the remote control.
2.Some function setting maybe different because of the different model or disc.
3.If the selected language is not recorded in the disc, then unit will show the appointed language.
4.About the “SETUP” ,p1ease read the follow.
22 Press ”SETUP" on the remote control, it will apear the following touch menu:
AUDIO SETUP
| Audio out | b |sromforr
KeY SPDIF/RAW
SPDIFIPCM
Exit setup
AUDIO SETUP
Audio out
Key P
IIIIIII
Exit setup
AUDIO SETUP
Audio out
Key
INSTRUCTIONS
Note: When above table appear, press b button and A
button to choose your desired item, press ENTER button
to store settings. Press SETUP button again to exit.
27
INSTRUCTIONS
LANGUAGE SETUP ‘
u o Ctu'nese
Subfiflem Germm LANGUAGE SETUP
Menu lung .
Elm OSD_1=nsmse
And“ 1553 Chinese
WW Subtitle ling German
“1“ P Spam
Frmch
Portuguese
Exit setup Latin
;, mm
LANGUAGE SETUP
Audio ling > Chinese
Subtitle I‘I‘S German
French
Portuguese
Latin
lawn
Exit setup
lv
LANGUAGE SETUP
OSDIansuase
Audiolnng
> cm
Menu , ; German
Spanish
French
Portuguese
Latin
Japan
Exit setup
26
LANGUAGE SETUP
OSDIanguage
Audiolang
Subfiflelnng
Menulang
Note: When above table appear, press b button
and A button to choose your desired item, press
ENTER button to store settings. Press SETUP
button again to exit.
SYSTEM SETUP
TV system
Video
TV Type
Password
Rating
Default
‘m>
INSTRUCTIONS
LANGUAGE SE [U P
050 hnsuase
Audio ling
subtiflelang
mermlang
um.
AUDIO SETUP
Audio out
Key
Eydt setup
Exit setup
23
INSTRUCTIONS
SYSTEM SETUP
TV system
Video
WTYPe
Password
Rating
Default
Exit setup
‘ Press V
SYSTEM SETUP
mm >-
Video m1,
TV'Iype AUTO
Password
Rating
Default
Exit setup
Note: When above table lppelx. press 1 button
lm'lA button to choose your desired item, rel-
ENTER button!» store settings. M53
button quinine exit.
SYSTEM SETUP
TVsystem
|Video | b |s-anso
TVTVPe
Password
Rflfins
Default
Exit setup
24
Note: Operation is same as above setting.
SYSTEM SETUP
TVsystem
Video
TVType P 4: 3PS
PF 4. 3m
Rating 16: 9
Default
Exit setup
Note: Operation is same as above setting.
l»
INSTRUCTIONS
SYSTEM SETUP
TVsystem
Video
TV ‘r
> mm
Rating
Default
Exit setup
SYSTEM SETUP
Note:
lAfter input code, ENTER button
to tum on child lat-Elm
2Move cursorto level item, choose
desired' level.
3. You only can choose level Murdock state.
‘
TV system
Video
Wm»
Password
Rating
Default
Exit setup
SYSTEM SETUP
TV system
Video 1 KlD.SAFE
TV we 2 G
Password 3 PG
> 4 m 13
Default 5 PG-R
6 R
7 NC- 1 7
Exit setup
SYSTEM SETUP
TV system
Video
TV Tipe
Password
Rating
—->
Exit set-up
25

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : PDF
Modify Date                     : 2008:03:17 14:44:40+08:00
Create Date                     : 2008:03:17 14:44:26+08:00
Metadata Date                   : 2008:03:17 14:44:40+08:00
Format                          : application/pdf
Document ID                     : uuid:94e897da-33e9-4843-a293-f441698a664a
Instance ID                     : uuid:95952b0e-acf3-40fb-b041-8f5bbb2efd6b
Page Count                      : 7

EXIF Metadata provided by EXIF.tools