SOLT SOLTMAIN MAIN TRANSCEIVER User Manual User s Guide SM3 ENG indd
SOLT CO., LTD MAIN TRANSCEIVER User s Guide SM3 ENG indd
SOLT >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2139262 |
| Application ID | afUnAWYe6KdDeCTjavGvlw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 269.37kB (3367101 bits) |
| Date Submitted | 2013-12-11 00:00:00 |
| Date Available | 2013-12-11 00:00:00 |
| Creation Date | 2013-10-31 11:51:15 |
| Producing Software | Acrobat Distiller 9.5.5 (Windows) |
| Document Lastmod | 2013-12-04 11:06:27 |
| Document Title | User_s Guide (SM3)_ENG_ì¸ì¦ìš©.indd |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | in |
User's Guide SOLTMAIN SOLTBELL / ST-B3 Important Safety Instructions $POUFOUT In order to prevent harm or injury to those using the equipment or to any other persons and/or property, please be sure to read the following safety instructions. Important Safety Instructions ....................................... 3 Supplies Per Models .................................................... 4 Installation guide ......................................................... 5 Name of each section (Main) ....................................... 6~7 Warning This sign warns of possible death or serious injury to persons and/or property. Attention This sign warns of possible damage or injury to persons and/or property. Name of each section (Bell) ......................................... 8 List of setting modes for Main transceiver .................... 9 Warning F0 New call number registration mode ......................... 10~11 F1 Sound setting mode ................................................ 12~13 F2 Time display setting mode ...................................... 14~15 F4 Selected sound setting mode .................................. 18~19 F5 Repetition call setting mode ................................... 20~21 F6 Call number changing mode ................................... 22~23 F7 Deleting selected call number mode ........................ 24~25 Power related F3 Sound repeat setting mode ..................................... 16~17 Make sure the power plug is correctly inserted in to the wall outlet. [If the plug is inserted improperly, it may cause electric shock or generate heat resulting in fire.] Attention Attention Never do anything that might cause Do not connect or disconnect the damage to the cord or power plug. power plug with wet hands. [This may generate heat resulting in fire.] [This may result in electric shock.] Attention F8 Every call number deleting mode ............................ 26~27 F9 See all numbers or deleting each call number mode .......... 28~29 Warning E1 New call number sequence registration mode ........ 30-31 Do not use multiple power plugs on one connector. [This may generate heat resulting in fire.] Checkup prior to a notification .................................... 32 Attention Unplug the power plug if the main unit is damaged. [It may cause electric shock or generate heat resulting in fire. Please contact service center.] Unplug the power plug, in case of lightening or when unused for long periods of time. [It may cause electric shock or generate heat resulting in fire.] Attention Specification Model SOLTBELL SOLTMAIN 433.0500 ~ 434.7900 Freq Stability ±10 ppm Data Rate 1800 bps Channel space 12.5 KHz Modulation FSK (±3KHz) 10mW (Max) - Conducted Power Output Power Sensitivity N/A -118dBm (at 12dB) Power Supply DC 3V CR2032 Coin Cell DC 12V/1A Adapter Dimension(mm) 67W × 42L X 11H 288W × 133L × 40H Battery Life cycle More than 1year (@30 Calls / day) External Power Antenna PCB (Internal) Tilt base snap-in_dipole (External) Attention Handling Frequency(MHz) Do not harm or damage the unit with sharp object such as nail, pencil, or pen. [It will damage the surface of the unit and cause malfunction.] Attention Do not clean the unit with water, benzene, or paint thinner. It may damage insulation of electrical parts resulting in electrical shock or fire. If foreign object enters the unit, please contact service center. It may damage internal parts of the unit resulting in fire electrical shock or fire. Attention Warning Attention Do not disassemble or modify the unit. If repair of the unit is required, please contact the service center. It may cause electric shock or generate heat resulting in fire. Use only the batteries specified in this manual. [The batteries could leak corrosive liquids, explode or catch on fire.] Dispose used batteries properly and keep away from reach of children. Contact physician immediately when the battery is swallowed by children. Supplies Per Models Installation guide To assure the finest performance, please read this manual carefully. Main ① Location Main Adaptor Avoid metal plates, electrical wires, and LED lighting that will shorten reception range. Attention Do not install near any heat sources such as radiators, stoves, or other appliances that produce heat. There is danger of fire or an electric shock. Warning The location should be safegarded from excess moisture, dust, and rain. There is danger of fire or an electric shock. Attention ② Bracket Installation 20cm Installation Deck (Screw 2pcs) ③ Power Cord Wall mount bracket should be placed at least 20cm below the ceiling. Reception range can be shorten if placed less than 20cm. (Use the adapter provided in the package.) B ell ④ Wall Mounting ST-B3 (Pull down the unit until clicking sound is heard. ) SOLTBELL Name of each section (Main) ① Retractable antenna : 180 degrees pivot. Front ① Retractable antenna ② Bell number indicator : activated led number varies by different models. ③ Setting buttons MENU / ESC ② Call number display · Menu button in setting mode · Alphabetic and numeric changing button ·Up/ Down buttons ·Changing volume (0-9 levels): default level is 5 ▲ ▼ ※ To change volume, press up/down to desired level and press SET button ◀ ▶ SET / PWR ③ Setting buttons / ④ Status indicator [PWR] ·Left / Right buttons ·Storing button for set value ·Power button ④ Status indicator : Location of indicator differs by different models. ⑤ Holes for wall mount PWR Red led indicates power is on ⑤ Holes for wall mount : Refer to item 4 of Installation Guide in page 5. Back ⑥ Speaker : 1.5W / 50Φ x 1.25mm ⑦ Adapter input: DC12V 1A (Use the supplied adapter) Limited accessary warranty: malfunctioning of supplied adapter during its use is not covered by manufactures' warranty. ⑥ Speaker Purchasing an adapter with AC110~22OV input, DC12V 1A output is recommended. Input : AC110~220V Output : DC12V 1A ⑦ Adapter input (DC12V 1A) Name of each section (Bell) List of setting modes for Main transceiver ※ Color of the Bell may vary with different models. Each setting mode below is activated with using Setting buttons. Upper side F0 F1 Sound setting mode Sets bell sound for all Bells. (22 bell sounds / default value is 1) F2 Display time setting mode Sets display duration. (default value is 30 seconds) F3 Ring repetition setting mode Sets ring repetition number. (default value is 1) Battery replacement instruction F4 Unique Bell sound setting mode Sets bell sound for individual Bells It is strongly advised to use specified battery type compliant with international standards. (CR2032 3V coin type lithium battery) F5 Call redundancy interval setting mode Sets interval for redundant calls (default value is 3 seconds) F6 Call number changing mode Assigns different call number for the Bell. F7 Call number deleting mode using the Bell Deletes call number from the list using the Bell F8 All Call number deleting mode Deletes all call number on the registered call number list F9 Call number deleting mode using the Main unit Deletes call number from the list using the main Unit. E1 New call number sequence registration mode Sequential registration call number. ① Call button Bottom ① Unscrew the screws at the back of the Bell to remove the lid. ② Place the battery into a holding bracket with + sign at the top. ③ Close the lid and screw the screws. New call number registration mode Adds new call number to the list of registered call numbers. New call number registration mode ·Adds new call number to the list of registered call numbers. ⑴ Press and hold (MENU/ESC) button for 3 seconds. Press the call number. ⑷ Press (SET) button. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·Selected number is blinking. This is call number registration mode. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·Entering setting mode as [F0] is displayed. ⑸ Press the bell button to register. ·Registration for selected call number is completed. To register another Bell, repeat the processes from (3) to (5). ⑵ Press (SET) button. MENU / ESC ▲ VOLUME ▼ ◀ ▶ The number has been registered. SET / PWR ·blinking [0] is displayed. ※ " The number already has been registered. " is announced in the case of pressing currently registered Bell button. ⑶ Press (▲▼◀▶) buttons. Sets a new number. The cipher is changing. · Press (◀▶) buttons to move to different digits. · Press (MENU) button to toggle form Number mode to English mode. MENU / ESC ▲ VOLUME ▼ ◀ ▶ This is english mode. This is number setting mode. ⑹ Press and hold (MENU/ESC) button for 3 seconds when registration is finished. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR · [F0] is displayed and return to previous step. SET / PWR ※ Press (▲▼) buttons to select different setting mode. Number mode ⑺ Press (MENU/ESC) button. %ODQN MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·[--] is displayed and ready for reception. English mode %ODQN 10 11 Sound setting mode ·Sets bell sound for all Bells. ⑴ Press and hold (MENU/ESC) button for 3 seconds. This is call number registration mode. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR The setting has been completed. ⑸ Press (SET) button. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·[F1] is displayed and returns to previous step. ·Entering setting mode as [F0] is displayed. ※ Press (▲▼) buttons to select different setting mode. ⑵ Press (▲) button once. This is sound setting mode. ⑹ Press (MENU/ESC) button. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·[F1] is displayed MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR · [--] is displayed and ready for reception. ⑶ Press (SET) button. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR BELL (Preset mode : ding-dong 1) ·selected sound is played as [1] is displayed. ⑷ Press (▲▼) buttons. Select the desired bell sound. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·Selected sound number is displayed. ※ Selected bell sound is played as navigating by pressing (▲▼) buttons. 12 ding-dong 1 (Preset mode) 12 ding-dong 8 ding-dong 2 13 ding-dong 9 ding-dong-dang 1 14 ding-dong 10 ding-dong-dang 2 15 chime bell 1 ding-dong 3 16 chime bell 2 ding-dong 4 17 cow ding-dong 5 18 pig water drop 19 rooster ding-dong-dang 3 20 siren 10 ding-dong 6 21 birdcall 1 11 ding-dong7 22 birdcall 2 13 Time display setting mode ·Sets display duration. ⑴ Press and hold (MENU/ESC) button for 3 seconds. ⑸ Press (SET) button. The setting has been completed. This is call number registration mode. MENU / ESC MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ▲ VOLUME ▼ ◀ ▶ SET / PWR ·[F2] is displayed and returns to previous step. ·Entering setting mode as [F0] is displayed. ※ Press (▲▼) buttons to select different setting mode. ⑵ Press (▲) button twice. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR This is time display setting mode. ·[F2] is displayed. ⑹ Press (MENU/ESC) button. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR · [--] is displayed and ready for reception. ⑶ Press (SET) button. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·Blinking [30] is displayed. ※ 30 is set for default. (Unit : second) ⑷ Press (▲▼) buttons. Select the desired duration. /PUF What is time display setting mode ? Duration of displaying call number received on Main unit. [Call number is displayed for 30 seconds as default is set for 30] ※ Call number display is stayed on if 0 is set. MENU / ESC 14 ▲ VOLUME ▼ ◀ ▶ SET / PWR ·Selected duration is displayed. 15 Sound repeat setting mode ·Set sound repeat number. ⑴ Press and hold (MENU/ESC) button for 3 seconds. ⑸ Press (SET) button. The setting has been completed. This is call number registration mode. MENU / ESC MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ▲ VOLUME ▼ ◀ ▶ SET / PWR ·[F3] is displayed and returns to previous step. ·Entering setting mode as [F0] is displayed. ※ Press (▲▼) buttons to select different setting mode. ⑵ Press (▲) button 3 times. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR This is sound repeat setting mode. ·[F3] is displayed. ⑹ Press (MENU/ESC) button. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR · [--] is displayed and ready for reception. ⑶ Press (SET) button. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·[1] is displayed. ※1 is set for default. (Unit : number) e.g.) 1 : repeat once 2 : repeat twice 3 : repeat 3 times ⑷ Press (▲▼) buttons. Sets desired number . MENU / ESC 16 ▲ VOLUME ▼ ◀ ▶ SET / PWR ·The selected number is displayed. 17 ⑸ Press (SET) button. Selected sound setting mode ·Sets bell sound for individual Bells. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·Bell sound of selected call number is played and stop blinking. ⑴ Press and hold (MENU/ESC) button for 3 seconds. This is call number registration mode. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ⑹ Press (▲▼) buttons. Select Desired sound ID. Bell sound is played in sequence. ·Entering setting mode as [F0] is displayed. MENU / ESC ⑵ Press (▲) button 4 times. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ▲ VOLUME ▼ ◀ ▶ SET / PWR This is selected sound setting mode. ·[F4] is displayed. ⑺ Press (SET) button. Do you want to change ? ⑻ Press (SET) button. It has been changed. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ⑶ Press (SET) button. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·Selected bell sound ID is displayed. ·To change another call number and its bell sound id, repeat the processes from (4) to (8). [e.g.] ⑼ Press (MENU/ESC) button. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·[F4] is displayed and returns to previous step. ·Registered call number and bell sound ID is displayed and blinking. Call number ※ Press (▲▼) buttons to select different setting mode. Bell sound ID ⑷ Press (▲▼) buttons. Select a call number you want to change. ⑽ Press (MENU/ESC) button. MENU / ESC MENU / ESC 18 ▲ VOLUME ▼ ◀ ▶ SET / PWR ·Selected call number is displayed and blinking. ▲ VOLUME ▼ ◀ ▶ SET / PWR · [--] is displayed and ready for reception. 19 Repetition call setting mode ·Sets interval for redundant calls. ⑴ Press and hold (MENU/ESC) button for 3 seconds. ⑸ Press (SET) button. The setting has been completed. This is call number registration mode. MENU / ESC MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ▲ VOLUME ▼ ◀ ▶ SET / PWR ·[F5] is displayed and returns to previous step. ·Entering setting mode as [F0] is displayed. ※ Press (▲▼) buttons to select different setting mode. ⑵ Press (▲) button 5 times. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR This is repetition call setting mode. ·[F5] is displayed. ⑹ Press (MENU/ESC) button. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR · [--] is displayed and ready for reception. ⑶ Press (SET) button. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·[3] is displayed. ※ 3 is set for default. (Unit : second) ⑷ Press (▲▼) buttons. Sets the desired number. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·Selected number is displayed. /PUF What is repetition call setting mode? Redundant call is ignored for certain period of time. [Redundant call is ignored for 3 seconds as 3 is set for default] 20 21 Call number changing mode ·Assigns different call number for the Bell. ⑴ Press and hold (MENU/ESC) button for 3 seconds. This is call number registration mode. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ⑵ Press (▲) button 6 times. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ⑹ Press (▲▼◀▶) buttons. sets desired to call number. ·Press (◀▶) buttons to move to different digits. ·Entering setting mode as [F0] is displayed. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR This is call number changing Mode. ·[F6] is displayed. ⑺ Press (SET) button. Do you want to change ? ·Set call number is blinking. ⑻ Press (SET) button. It has been changed. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ⑶ Press (SET) button. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·Set call number is displayed. ·Registered another number is displayed. · "It has been changed." is played. · To change another call number, repeat the processes from (4) to (8). ·Registered call number is displayed. ⑼ Press (MENU/ESC) button. ⑷ Press (▲▼) buttons. Select the call number you want to change. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·[F6] is displayed and returns to previous step. ·Selected call number is displayed. ※ Press (▲▼) buttons to select different setting mode. ⑽ Press (MENU/ESC) button. ⑸ Press (SET) button. MENU / ESC 22 ▲ VOLUME ▼ ◀ ▶ SET / PWR ·The Last digit is blinking. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR · [--] is displayed and ready for reception. 23 Deleting selected call number mode ·Deletes call number from the list using the Bell. Do you want to delete it ? ⑸ Press the delete button. ⑴ Press and hold (MENU/ESC) button for 3 seconds. ·Selected call number is displayed and blinking. This is Call Number Registration Mode. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·Entering setting mode as [F0] is displayed. ⑹ Press (SET) button. ⑵ Press (▲) button 7 times. MENU / ESC ▲ VOLUME ▼ ◀ ▶ This is deleting selected call number mode. SET / PWR MENU / ESC ▲ VOLUME ▼ ◀ It has been deleted. ▶ [e.g.] SET / PWR ·[F7] is displayed. ·Blinking [--] is displayed. ·" It has been deleted." is played. ·To delete another call number, repeat the processes from (4) to (6). ⑶ Press (SET) button. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR [e.g.] Total registered Total registered ⑺ Press (MENU/ESC) button. MENU / ESC ⑷ Press (SET) button. MENU / ESC ▲ VOLUME ▼ ◀ SET / PWR [e.g.] ◀ ▶ SET / PWR ·[F7] is displayed and returns to previous step. ※ Press (▲▼) buttons to select different setting mode. Press the call number. ▶ ▲ VOLUME ▼ Total registered ⑻ Press (MENU/ESC) button. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR · [--] is displayed and ready for reception. ·Blinking [--] is displayed. 24 25 Every call number deleting mode ·Deletes all call number on the registered call number list. ⑷ Press (SET) button. ⑴ Press and hold (MENU/ESC) button for 3 seconds. MENU / ESC ▲ VOLUME ▼ ◀ ▶ Do you want to delete all the numbers ? SET / PWR [e.g.] This is call number registration mode. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·Entering setting mode as [F0] is displayed. ·Blinking [DE] is displayed. Total registered ⑵ Press (▲) button 8 times. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR This is Every call number deleting mode. ⑸ Press (SET) button. MENU / ESC ▲ VOLUME ▼ ◀ ◀ ▶ SET / PWR ·[F8] is displayed. ·[F8] is displayed and returns to previous step. ※ Press (▲▼) buttons to select different setting mode. ⑶ Press (SET) button. MENU / ESC ▲ VOLUME ▼ It has been deleted. ▶ SET / PWR [e.g.] ⑹ Press (MENU/ESC) button. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR · [--] is displayed and ready for reception. ·Blinking [AL] is displayed. Total registered 26 27 See all numbers or deleting each call number mode Deleting call number ·All register list / Deletes call number from the list using the main Unit. ⑸ Press (▲▼) button. Select the call number you want to delete. All register list MENU / ESC ⑴ Press and hold (MENU/ESC) button for 3 seconds. ▲ VOLUME ▼ ◀ ▶ SET / PWR ·Selected call number is displayed and blinking. This is call number registration mode. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·Entering setting mode as [F0] is displayed. ⑵ Press (▲) button 9 times. ⑹ Press (SET) button. Do you wnat to delete it ? ⑺ Press (SET) button. It has been deleted. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·[F9] is displayed. ⑶ Press (SET) button. Total registered [e.g.] This is see all numbers or deleting each call number mode. ·Selected Call number is deleted and total registered number is changed accordingly. Total registered ·To delete another call number, repeat the processes from (5) to (7). Call number [e.g.] MENU / ESC ▲ VOLUME ▼ ◀ ▶ ⑻ Press (MENU/ESC) button. SET / PWR MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·[F9] is displayed and returns to previous step. ·Registered call number is displayed. ※ Press (▲▼) buttons to select different setting mode. Call number ⑷ Press (▲▼) buttons. You can check the entire call number is registered. MENU / ESC 28 ▲ VOLUME ▼ ◀ ▶ SET / PWR ·Registered with the call number will be displayed sequentially. ⑼ Press (MENU/ESC) button. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR · [--] is displayed and ready for reception. 29 New call number sequence registration mode ·Sequential registration call number. ⑴ Press and hold (MENU + SET) button for 3 seconds. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·Entering setting mode as [E1 Sb] is displayed. ⑷ Press and hold (MENU) button for 3 seconds when registration is finished. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·[E1 Sb] is displayed and return to previous step. ⑵ Press (SET) button. ⑸ Press (MENU/ESC) button. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR ·blinking [1] is displayed. MENU / ESC ▲ VOLUME ▼ ◀ ▶ SET / PWR · [--] is displayed and ready for reception. ⑶ Press the bell button to register. Sequence is registered. FCC compliance Information When used the This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) This device must accept any interference received, including interference that may cause undesired operation. ·Sequential register : 1, 2, 3, 4, 5, ...... 10, 11, .... ※ If you are not sequential registration. · Press (◀▶) buttons to move to different digits. · Press (MENU) button to toggle form Number mode to English mode. Number mode %ODQN English mode %ODQN 30 Cautions Modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense 31 Checkup prior to a notification · If you find the symptom as following from your product, please recheck. It may not be an obstacle. Main / Bell Trouble Check No power-on on main transmitter. Check the power connection of a main transmitter and if the adaptor is fitted to an outlet correctly. ※ As an adaptor is a consumptive goods, we recommend to change it through our agency or AC110~220V INPUT , DC12V 1A for your direct purchasing. Main display does not receive the number or displays a different number. When push a bell, it does not make a call, not lighting a LED. Check if the bell is registered to main monitor and if dip switches are changed. (Refer to " All register list " on page 28) If the battery of a bell is consumed or reached to a low voltage, please change to new one. ※ The Bell includes batteries usable for 2~3 years. ※ CR2032 Coin Cell Battery 1EA ※ As this product is a wireless communication equipment, it may not receive a number or a different number due to a surrounding environment or an interference of electronic machine. 32
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : 3.1-702 Format : application/pdf Title : User_s Guide (SM3)_ENG_인증용.indd Creator : in Create Date : 2013:10:31 11:51:15+09:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2013:12:04 11:06:27+09:00 Metadata Date : 2013:12:04 11:06:27+09:00 Producer : Acrobat Distiller 9.5.5 (Windows) Document ID : uuid:583d478c-8d4c-4503-a93a-2d79edbc6964 Instance ID : uuid:69aa1f94-3328-4041-9fa9-e0b713c4f632 Has XFA : No Page Count : 17 Author : inEXIF Metadata provided by EXIF.tools