SOLUM SLG-DM101 USB Gateway User Manual

SOLUM CO.,LTD. USB Gateway

User Manual

1 Solu-M USB Gateway User Manual (SLG-DM101) PMN : USB Gateway FVIN : 6.0.24.4 Document Summary Author: D&C Development 1Group, D&C Division Distributor: Solum Co., Ltd.
2Tel.: 031-8006-7650 www.solu-m.com Editor Information - Tel.: +82-31-8006-7650 - Address : A-6th floor, 357, Guseong-ro, Giheung-gu, Yongin-si, Gyeonggi-do Copyright Notification Solum Co., Ltd. Copyright @2018 Solum Co., Ltd. All trademarks used are properties of their respective owners. The content of this document is subject to change without prior notice. The content of this document is intellectual property of Solum Co., Ltd. This document may not be reproduced or published without prior consent from Solum Co., Ltd. No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. © 2018 Solum Co., Ltd. All rights reserved.
3Revision History Rev. Date Remark 1.0 10.29.2018 First Edition.
4Contents 1. Precautions .............................................................................................................................. 5 2. Overview ................................................................................................................................... 6 3. Product Specifications ...................................................................................................... 7 3.1 General Specifications ..................................................................... 7 3.1.1 USB Gateway 3.2 RF Specifications .............................................................................. 8 3.2.1 USB Gateway 4. Product Description ........................................................................................................... 9 4.1 Exteior ............................................................................................... 9 4.1.1 USB Gateway 5. Operating Procedure ....................................................................................................... 10
51. Precautions “This RF device operates on the 2.4GHz frequency band and can produce radio interference. The device, therefore, may not be used for applications where safety of human lives is concerned.” 1) Usage Environment Take extra caution when using this RF device in the vicinity of other electronic devices and appliances. Most electronic devices and appliances use electromagnetic waves. Electromagnetic waves emitted by this RF device can affect other electronic devices and appliances. If using the device in an explosion hazard area, follow all safety regulations, instructions, and signals. 2) Storage and Use Moisture and liquids can damage internal parts and circuit boards if allowed to enter into the device itself. Do not place or store the product on a sloped surface. The product may slide and fall off the surface and damage. Use the product in temperatures ranging from 0℃ to +40℃. Parts and circuits may damage if used or stored under temperature extremes. Avoid areas with strong magnetism or subject to magnetism. Contact between the device and a magnetic object can lead to malfunctions. Do not place the product near heat-producing kitchen appliances like a stove or a microwave or in the vicinity of highly pressurized containers. External impact to the product, such as from being dropped, can damage the screen. Twisting and bending the product can damage the exterior casing and the internal components.
62. Overview USB Gateway make up a system the electronically displays price and other product information that are traditionally shown printed or written on paper in places like the supermarket. Here, ESL(Electronic Shelf Label) USB Gateway receives product price updates from the server and uploads the new data to the applicable electronic shelf label tags (ESL-Tag), changing the displayed price information. <Diagram 1> ESL System
7 3. Product Specifications 3.1 General Specifications 3.1.1. USB Gateway General Communication USB2.0 Zigbee RF(based on IEEE 802.15.4) Dimension (W*H*D) 30 * 200 * 11 (mm) Weight (g) 50g Enclosure Plastic (ABS) Power USB Power (5V,0.5A)
8 3. 2 RF Specifications 3.2.1 Gateway Category Specification Note Antenna Type Dipole Antenna (external type) 2ea Transmit Frequency 2405MHz ~ 2480MHz Receive Frequency 2405MHz ~ 2480MHz Antenna gain 2 dBi Modulation O-QPSK Channels 16ch Operating Temperature 0℃ to +40℃ Power USB Power (5V, 2A 500mA)
94. Product Description 4-1 Exterior 4.1.1 USB Gateway Status LED
# 1 2 3 4 5. Op Operat 3-color LEDRED On (200msOff On Off peratition CheD Status of GREEN s) Off Off Off On ing Peck fUSB GatewBLUE Off On Off Off Procedway StatusNormalWarninWarninNormaldureComm AboutItmeang PressinIfpressactivatg Activat(power Duringents 200ms,AtbonsUSBGWisngfactoryresesingthebuttoed tingfactoryreredonwhilepbooting,Enteotingtime justrebootedetbuttonandonmorethanesetandrestopressingbuttoeringintoLinud TurningonU10secs,factooringfirmwareon).IttakesabuxKernelMod 10USBGW orymodewille bout2minsde 0be
115 Off Blinking(1sec) Off Normal NormalMode(Webserverisworkingproperly) 6 Off Blinking(1sec) On/Off Normal NormalMode(WebserverandRFModuleareworkingproperly) ‐GreenBlinking(NormalMode) ‐BlueOnfor10sec(WakeupModeOn)periodicallyevery5min 7 On (5sec) Blinking(1sec) Off Warning NTPfailed ‐REDOnfor5secperiodicallyevery10sec 8 Off On Blinking(200ms) Warning Checkingfirmwareupdatefor1sec~20sec BlueBlinking200ms 9 Blinking (250ms) Blinking (1sec) off Warning Pressingfactoryresetbutton RED:250ms,Green:1sec 10 On Blinking (1sec) On Warning ActivatingFactoryResetmode(Resettingconfigurationfiles) 11 On (Long) Off Off Warning DownloadingfirmwarefilefromServerandupdatingfirmware 12 Off ON Blinking (200ms) Warning WritingRFFirmwaretoRFMODEM 13 On Blinking (1sec) Blinking Warning RFTESTmode(Onlyformanufacturingtest) .Installation a) Map product information and tag IDs. Each tag has a unique 1) MAC Address that serves as the tag’s ID. Map 1) MAC Addresses of the tags and 2) barcodes of the products. Using a PDA featuring Win CE 5.0 or higher as the operating system and a barcode scanner, scan the tag’s 1) MAC Address and then the product’s barcode to map. (1) MAC Address (2) Product Barcode
b) Regi Usin ster producng the PDA(4) Serv t and tag mA’s WLAN fver apping infofeature, regi + ormation. ister mappin (3) Indu+ ng data with ustrial PDA h the 4) Serv A ver. 12 2
c) Atta d) Atta e) Takmake sure t f) Slid g) Progateway WARNING :equipment mmanual. Theis made. This device This device Including int ach a back rach end andke a tag that to align the de in the midoducts infor This equipmmay cause hae user could complies witmay not cauerference tharail to the shd middle caphas been mtag and theddle rail to trmation on ment may gearmful interfelose the authth part 15 of se harmful inat may causehelf (secure ps to the mimapped frome rail groovethe fixed baTags such nerate or useerence unleshority to operthe FCC Rulnterference, e undesired using doubiddle rail. m step a) andes properly.ack rail. as price wi e radio frequss the modificrate this equles. Operatioand (2) this operation.ble-sided tapd insert to thill be updatuency energycations are eipment if an on is subject device must pe or screwshe middle red from they. Changes oexpressly appunauthorizeto the followaccept any s). rail from stee server regor modificatioproved in thed change or wing two condinterference 13ep d). Here, gularly via ons to this e instructionmodificationditions: (1) received, 3n
14NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Caution This device complies with FCC radiation exposure limits for an uncontrolled environment. Avoid operating this device at a distance less than 20cm from the user. THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. ISED Information to User This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Navigation menu