SOLUM ST-GM3300N ESL Graphic TAG User Manual S TAG Datasheet ST GM42001

Download:
Mirror Download [FCC.gov]
Document ID	2790484
Application ID	RFEN7q3x1BSpBE5PbKPrzQ==
Document Description	User manual 2 of 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	64.43kB (805339 bits)
Date Submitted	2015-10-22 00:00:00
Date Available	2016-04-19 00:00:00
Creation Date	2015-09-17 14:48:37
Producing Software	Microsoft® Word 2010
Document Lastmod	2015-10-14 11:24:31
Document Title	S-TAG Datasheet(ST-GM42001)
Document Creator	Microsoft® Word 2010
Document Author:	Samsung Electro-Mechanics

S-TAG Datasheet(ST-GM33000)
Preliminary
CUSTOMER APPROVAL SHEET
Company Name
SOLUM CO.,LTD.
MODEL
ST-GM33000
CUSTOMER
APPROVAL
□ APPROVAL FOR SPECIFICATIONS ONLY (Spec. Ver. 1.0 )
□ CUSTOMER REMARK :
Issued By
Checked By
Approved By
JS Seo
YB Lee
JG Ryu
SOLUM CO.,LTD.
150, Maeyoung-ro(Maetan3-Dong), YoungTong-Gu, Suwon, Gyeonggi-Do, Korea
Tel : 82-31-210-5114
REV 1.0
SOLUM CO.,LTD.
1/20
S-TAG Datasheet(ST-GM33000)
Preliminary
S-TAG Datasheet
S-Label (Electronic Label System)
REV 1.0
SOLUM CO.,LTD.
2015-03-23
Summary
This datasheet presents the general performance and specifications of S-Tag for S-Label ESL (Electronic
Shelf Label) system, which is based on IEEE 802.15.4.
© 2015 Solu-M. All rights reserved
The names of actual companies and products mentioned herein
may be the trademarks of their respective owners.
No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means
without the express written consent of Solu-M.
This document is subject to change without notice.
REV 1.0
SOLUM CO.,LTD.
2/20
Preliminary
S-TAG Datasheet(ST-GM33000)
Table of Contents
GENERAL DESCRIPTION ..................................................................................................... 5
1.1
FEATURES .............................................................................................................................. 6
1.2
TYPICAL APPLICATIONS.............................................................................................................. 6
1.3
APPEARANCE ........................................................................................................................... 7
SPECIFICATION .................................................................................................................. 8
2.1
PRODUCT SPECIFICATION ........................................................................................................... 8
2.2
RADIO (RF) SPECIFICATION........................................................................................................ 8
2.3
MECHANICAL DRAWING ............................................................................................................. 9
2.4
LABELS ................................................................................................................................ 10
2.5
BARCODE SCANNING ............................................................................................................... 12
OPERATION TEST .............................................................................................................. 13
ESL OPERATION BY DISPLAY ........................................................................................... 14
PACKAGE ........................................................................................................................... 17
CAUTIONS FOR TREATMENT............................................................................................. 18
6.1
USAGE ENVIRONMENT ............................................................................................................. 18
6.2
STORAGE AND USE ................................................................................................................. 18
6.3
FCC ................................................................................................................................... 19
REV 1.0
SOLUM CO.,LTD.
3/20
S-TAG Datasheet(ST-GM33000)
Preliminary
Document History
Rev.
Date
1.0
23 MAR 2015
REV 1.0
Revision history
Initial release
Page
SOLUM CO.,LTD.
4/20
Preliminary
S-TAG Datasheet(ST-GM33000)
1 General Description
This S-Tag product is a part of Solu-M S-Label (Electronic Shelf Label) system as well as S-Label Gateway
(S-Gate), Remote controller (S-RC). S-Label system make up a system that electronically displays price
and other product information on S-Tags, which has been traditionally printed or written on paper in
places like retail markets.
S-Tag receives product price/information updates from S-Gate and updates or changes its display of price
and other information.
S-Tag is the product based on IEEE standard 802.15.4 for low power wireless communication
applications. S-Tag consists of RF transceiver, RF circuitry and ARM Cortex M3 MCU offering IEEE
802.15.4 based network protocol and MAC protocol and other peripheral devices.
Figure 1 ESL System
REV 1.0
SOLUM CO.,LTD.
5/20
S-TAG Datasheet(ST-GM33000)
Preliminary
1.1 Features
Display : E-Paper Display (EPD) (active type) (87 x58 mm)
Display Color : Black, White
Display Resolution : 300 x 200 pixel (110dpi)
Communication : Wireless communication based on IEEE 802.15.4 (2405~2480MHz)
Operating on 2.4GHz Unlicensed ISM band for ZigBee
Low Power Consumption
External Wakeup : Magnetic Wakeup (using Reed switch)
Outline Dimension : 87 mm x 58 mm x 12 mm
Working condition: Indoor where wireless communication is available.
1.2 Typical Applications
Retail industry with electronic displays, platforms, solutions and services.
Intelligently communicating, managing, and optimizing price and product informations.
REV 1.0
SOLUM CO.,LTD.
6/20
S-TAG Datasheet(ST-GM33000)
Preliminary
1.3 Appearance
[ Front ]
REV 1.0
[ Rear ]
SOLUM CO.,LTD.
7/20
S-TAG Datasheet(ST-GM33000)
Preliminary
2 Specification
2.1 Product Specification
Item
Description
Size
87.0 x 58.0 x 12.0 mm
Battery
CR2450 Lithium Battery (3V, 2PCS)
2.4 ~ 3.3Vdc (condition : In active status)
Display
EPD PANEL display (Graphic type)
3.3 Inch, 110 Dpi
2Color : White / Black
Housing Color
White
Information display
Price, Unit, Symbol etc.
Communication
Wireless communication based on IEEE 802.15.4 (2405~2480MHz)
Communication Distance
Radius 20m ( Line of Sight)
Operation Temp.
0 ~ 40 ℃ (@20~60% RH)
Etc.
No additional anti-theft locking structure : Rail Mounted only
2.2 Radio (RF)1 Specification
SPEC
Item
TX
Parameter
Unit
Typ
Max
Transmit Power
-3
1.5
dBm
Error Vector Magnitude
10
28
When measured for 100 chips
33
mA
Total current at max Tx Power
dBm
PER < 1%
Tx Current
RX
Condition
Min
Receiver Sensitivity
-90
Test Channel : 2480MHz
REV 1.0
SOLUM CO.,LTD.
8/20
S-TAG Datasheet(ST-GM33000)
Preliminary
2.3 Mechanical Drawing
2.3.1 Case Dimension
Figure 3 Mechanical Dimension
REV 1.0
SOLUM CO.,LTD.
9/20
S-TAG Datasheet(ST-GM33000)
Preliminary
2.3.2 Exploded View
Figure 4 Exploded View
2.4 Labels
2.4.1 Serial Number Information
Serial 1, 2 Code Value
14
2JW
①
②
③
④
⑤
⑥
⑦
① Year : Last two digits of manufacturing year.
(00 ~ 99, Example : 2014 is '14')
② Month : Manufacturing month
(1 ~ 9, X(10), Y(11), Z(12))
③ Date : Manufacturing date
(1 ~ 9, A(10) ~ V(31))
④ Vendor : Manufacturing vendor
(S : SEMTHAI, T : TSEM, etc)
REV 1.0
SOLUM CO.,LTD.
10/20
S-TAG Datasheet(ST-GM33000)
Preliminary
⑤ Line number : Manufacturing Line number
('A', 'B', 'C', etc)
⑥ Revision : Product revision number
(A : First, B : Second, C : Third, etc )
⑦ ZigBee IC Lot Number : Last 3 characters
Product and Mac Label Drawings
Figure 5 Product and Mac Labels
Product information is indicated in a printed sticker label. The information consists of MODEL (model
name), MFD (manufacturing date), S/N (serial number), MAC (MAC address), CE certification mark, FCC
ID and Manufacture (SOLUM CO.,LTD.).
1)
Model Name : ST-GM33000
2)
MFD : (Month).(Date).(Year)
3)
S/N : Serial Number Information
4)
MAC : barcode & barcode number(hexadecimal 16 digits)
- 8 digits(1st ~ 8th)
ex) May.16.2014
: xxxxxx (Tag I.D.)
- 2 digits(9th ~ 10th) : 29
REV 1.0
(Tag size & type)
- 1 digit(11th)
:x
(Panel type)
- 1 digit(12th)
:x
(Checksum)
SOLUM CO.,LTD.
11/20
S-TAG Datasheet(ST-GM33000)
Preliminary
2.5 Barcode Scanning
2.5.1 Barcode Scanning Condition
Typically Scan distance is 8 ~ 9cm and angle is horizontality
Example)
Item
Scanner
PDA
MODEL
Angle
SYMBOL
(DS6708-SR20007ZZR)
8~9cm
Horizontality
DATALOGIC
(QUICKSCAN QD2430)
8~9cm
Horizontality
Motorola
(MC3190-SI2H04E0A)
8~9cm
Horizontality
Motorola
(MC17T-00)
6cm
30º
Motorola
(MC4597-BAPBA0000)
8~9cm
Horizontality
M3
(NA8NWCNMH40078)
8~9cm
Horizontality

REV 1.0
Distance
<30º>
SOLUM CO.,LTD.
12/20
S-TAG Datasheet(ST-GM33000)
Preliminary
3 Operation Test
It will be updated before 2nd release. Below is just a sample.

Equipments : Gateway (S-Gate), R/C (S-TAG), Jig for power supply

Target DUT : EPD TAG
Figure 6 Operation Test


Test Scenario
①
Install Tag on Jig
②
Ready to Gateway(S-Gate) and R/C
③
wake up Tag with R/C
④
Tag start to communicate with Gateway
⑤
Tag display the numeric information received from Gateway
⑥
Check Tag(EPD display status & MAC address value)
⑦
Wake up Tag with R/C
⑧
Check Tag(EPD display(blank display))
Criterion (Below both two conditions should be all satisfied)
①
Good : You can see ‘Black’ → ‘White’ display
②
Compare MAC address with that of label attached to Front or Back plane.
REV 1.0
SOLUM CO.,LTD.
13/20
S-TAG Datasheet(ST-GM33000)
Preliminary
4 ESL Operation by display
It will be updated before 2nd release. Below is just a sample.
Display
State
User Action
STATE: 1
None
Initial display when shipped
from the manufacturer (Blank
display).
STATE: 1
To assign a tag using a PDA
No change.
STATE 1  2
A tag woken up by an RC
Searching for GWs
(MAC address, tag version
and triangle).
STATE 2  4
None
A tag is connected to a GW
and received price
(Price)
REV 1.0
SOLUM CO.,LTD.
14/20
S-TAG Datasheet(ST-GM33000)
Preliminary
STATE 2  3
A tag failed to locate a GW
(blank).
STATE 4  5
Woken up by an RC
When a tag is connected to a
GW, and woken up by an RC,
Next page display predefined.
Display is end, tag wait 10
second wakeup signal by RC.
When signal is detected in
this time, immediately return
first Page and Send Price
Request to GW. No signal in
this time, after 10 second
return first Page and Same
Operation.
STATE 4  6
None
Connection to a GW is lost
(price and Rectangle on
upper right corner)
STATE 6  6
Woken up by an RC
When connection is lost and
woken up by an RC
(blinks with the price and
Rectangle)
Starts to search GWs.
REV 1.0
SOLUM CO.,LTD.
15/20
S-TAG Datasheet(ST-GM33000)
Preliminary
STATE 4  1
Initial display
To clear an assigned tag
using a PDA
(Blank display).
REV 1.0
SOLUM CO.,LTD.
16/20
Preliminary
S-TAG Datasheet(ST-GM33000)
5 Package
REV 1.0
SOLUM CO.,LTD.
17/20
S-TAG Datasheet(ST-GM33000)
Preliminary
6 Cautions for Treatment
Provisions should be made to protect against any damage to the product caused by improper handling.
It is highly recommended that the product should be installed within 3 months from the date of arrival in
the logistics hub. Recommended storage condition is in 0-40 Celsius degree, 20-60% RH environment.
This RF device operates on the 2.4GHz frequency band and can produce radio interference. The device,
therefore, may not be used for applications where safety of human lives is concerned.
6.1 Usage Environment
Take extra cautions when using this RF device in the vicinity of other electronic devices and appliances.
Most electronic devices and appliances use electromagnetic waves. Electromagnetic waves emitted by this
RF device can affect other electronic devices and appliances.
If using the device in an explosion hazard area, follow all safety regulations, instructions, and signals.
6.2 Storage and Use
Moisture and liquids can damage internal parts and circuit boards if allowed to enter into the device

itself.
Do not place or store the product on a sloped surface. The product may slide and fall off the

surface and damaged.
Use the product in temperatures ranging from 0℃ to +40℃. Parts and circuits may be damaged if

used or stored under temperature extremes.
The display panel needs extra care when handling.

Do not apply any impacts on outside since e-Paper display is fragile.
Continuous exposure to excessive moisture (over 60% RH) or UV makes display lifetime
shortened.
Ghosting image may be appeared in temperature conditions of less than 15 Celsius degree.

Avoid areas with strong magnetism or subject to magnetism.
Contact between the device and a magnetic object can lead to malfunctions.

Do not place the product near heat-producing kitchen appliances like a stove or a microwave or in
the vicinity of highly pressurized containers.

External impact to the product, such as from being dropped, can damage the product or battery
REV 1.0
SOLUM CO.,LTD.
18/20
Preliminary
S-TAG Datasheet(ST-GM33000)
casing can be separated.

Twisting and bending the product can damage the exterior casing and the internal components.

If this product operates abnormally in eliminating battery vinyl or replacing battery, you should
discharge it by contacting battery terminal (+) and (-).

This product uses 2.4GHz frequency band for wireless communication network. Radio
communications can be limited or affected by other applications which share same frequency band,
such as WiFi, Bluetooth, Zigbee, etc.

Frequent communications, updates and screen renewals may reduce battery life time.
6.3 FCC
FCC ID : 2AFWN-ST-GM3300N
WARNING : This equipment may generate or use radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this equipment if an unauthorized change
or modification is made.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, Including interference that may cause undesired operation.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications, However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
REV 1.0
SOLUM CO.,LTD.
19/20
Preliminary
S-TAG Datasheet(ST-GM33000)
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
This device complies with FCC radiation exposure limits for an uncontrolled environment.
Avoid operating this device at a distance less than 20cm form the user
REV 1.0
SOLUM CO.,LTD.
20/20

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Samsung Electro-Mechanics
Create Date                     : 2015:09:17 14:48:37+09:00
Keywords                        : SWB-T30, Datasheet, (Preliminary)
Modify Date                     : 2015:10:14 11:24:31+09:00
Subject                         : SWB-T30 Datasheet (Preliminary)
Has XFA                         : No
Language                        : ko-KR
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : Samsung Electro-Mechanics
Description                     : SWB-T30 Datasheet (Preliminary)
Title                           : S-TAG Datasheet(ST-GM42001)
Creator Tool                    : Microsoft® Word 2010
Metadata Date                   : 2015:10:14 11:24:31+09:00
Producer                        : Microsoft® Word 2010
Document ID                     : uuid:02952895-038a-4330-a0d3-493c55709644
Instance ID                     : uuid:9dc55e44-266f-4e09-875d-955e0f4b5e0a
Page Count                      : 20

EXIF Metadata provided by EXIF.tools