SOLUM ST-GM5800N ESL Graphic TAG User Manual S TAG Datasheet ST GM42001

SOLUM CO.,LTD. ESL Graphic TAG S TAG Datasheet ST GM42001

Contents

User Manual_20151014_v1 - User Manual_2AFWN-ST-GM5800N (for ST-GM5800N)

S-TAG Datasheet(ST-GM5800N)Preliminary REV 1.0 SOLUM CO.,LTD.1/20 CUSTOMER APPROVAL SHEET Company Name SOLUM CO.,LTD.MODEL ST-GM5800NCUSTOMER APPROVAL □APPROVAL FOR SPECIFICATIONS ONLY (Spec. Ver. 1.0 )□CUSTOMER REMARK :Issued By Checked By Approved By JS Seo YB Lee JG Ryu SOLUM CO.,LTD.150, Maeyoung-ro(Maetan3-Dong), YoungTong-Gu, Suwon, Gyeonggi-Do, Korea Tel : 82-31-210-5114
S-TAG Datasheet(ST-GM5800N)Preliminary REV 1.0 SOLUM CO.,LTD.2/20 S-TAG Datasheet S-Label (Electronic Label System) REV 1.0 SOLUM CO.,LTD.2015-03-23 Summary This datasheet presents the general performance and specifications of S-Tag for S-Label ESL (Electronic Shelf Label) system, which is based on IEEE 802.15.4. © 2015 Solu-M. All rights reserved The names of actual companies and products mentioned herein may be the trademarks of their respective owners. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the express written consent of Solu-M. This document is subject to change without notice.
S-TAG Datasheet(ST-GM5800N)Preliminary REV 1.0 SOLUM CO.,LTD.3/20 Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................... 5 1.1 FEATURES .............................................................................................................................. 6 1.2 TYPICAL APPLICATIONS .............................................................................................................. 6 1.3 APPEARANCE ........................................................................................................................... 7 2 SPECIFICATION .................................................................................................................. 8 2.1 PRODUCT SPECIFICATION ........................................................................................................... 8 2.2 RADIO (RF) SPECIFICATION........................................................................................................ 8 2.3 MECHANICAL DRAWING ............................................................................................................. 9 2.4 LABELS ................................................................................................................................ 10 2.5 BARCODE SCANNING ............................................................................................................... 12 3 OPERATION TEST .............................................................................................................. 13 4 ESL OPERATION BY DISPLAY ........................................................................................... 14 5 PACKAGE ........................................................................................................................... 17 6 CAUTIONS FOR TREATMENT............................................................................................. 18 6.1 USAGE ENVIRONMENT ............................................................................................................. 18 6.2 STORAGE AND USE ................................................................................................................. 18 6.3 FCC ................................................................................................................................... 19
S-TAG Datasheet(ST-GM5800N)Preliminary REV 1.0 SOLUM CO.,LTD.4/20 Document History Rev. Date Revision history Page 1.0 23 MAR 2015 Initial release -
S-TAG Datasheet(ST-GM5800N)Preliminary REV 1.0 SOLUM CO.,LTD.5/20 1 General Description This S-Tag product is a part of Solu-M S-Label (Electronic Shelf Label) system as well as S-Label Gateway (S-Gate), Remote controller (S-RC). S-Label system make up a system that electronically displays price and other product information on S-Tags, which has been traditionally printed or written on paper in places like retail markets. S-Tag receives product price/information updates from S-Gate and updates or changes its display of price and other information. S-Tag is the product based on IEEE standard 802.15.4 for low power wireless communication applications. S-Tag consists of RF transceiver, RF circuitry and ARM Cortex M3 MCU offering IEEE 802.15.4 based network protocol and MAC protocol and other peripheral devices. Figure 1 ESL System
S-TAG Datasheet(ST-GM5800N)Preliminary REV 1.0 SOLUM CO.,LTD.6/20 1.1 Features - - - - - - - - - Display : E-Paper Display (EPD) (active type) (163 x58 mm) Display Color : Black, White Display Resolution : 600 x 200 pixel (110dpi) Communication : Wireless communication based on IEEE 802.15.4 (2405~2480MHz)Operating on 2.4GHz Unlicensed ISM band for ZigBee Low Power Consumption External Wakeup : Magnetic Wakeup (using Reed switch) Outline Dimension : 168 mm x 58 mm x 12 mm Working condition: Indoor where wireless communication is available. 1.2 Typical Applications - Retail industry with electronic displays, platforms, solutions and services. - Intelligently communicating, managing, and optimizing price and product informations.
S-TAG Datasheet(ST-GM5800N)Preliminary REV 1.0 SOLUM CO.,LTD.7/20 1.3 Appearance [ Front ] [ Rear ]
S-TAG Datasheet(ST-GM5800N)Preliminary REV 1.0 SOLUM CO.,LTD.8/20 2 Specification 2.1 Product Specification Item Description Size 163.0 x 58.0 x 12.0 mm Battery CR2450 Lithium Battery (3V, 4PCS) 2.4 ~ 3.3Vdc (condition : In active status) Display EPD PANEL display (Graphic type) 5.8 Inch, 110 Dpi 2Color : White / Black Housing Color White Information display Price, Unit, Symbol etc. Communication Wireless communication based on IEEE 802.15.4 (2405~2480MHz)Communication Distance Radius 20m ( Line of Sight) Operation Temp. 0 ~ 40 ℃ (@20~60% RH) Etc. No additional anti-theft locking structure : Rail Mounted only 2.2 Radio (RF)1 Specification Item Parameter SPEC Unit Condition Min Typ Max TX Transmit Power -3 1.5 6 dBm Error Vector Magnitude - 10 28 % When measured for 100 chips Tx Current - 33 mA Total current at max Tx Power RX Receiver Sensitivity -90 - - dBm PER < 1% 1 Test Channel : 2480MHz
S-TAG Datasheet(ST-GM5800N)Preliminary REV 1.0 SOLUM CO.,LTD.9/20 2.3 Mechanical Drawing 2.3.1 Case Dimension Figure 3 Mechanical Dimension
S-TAG Datasheet(ST-GM5800N)Preliminary REV 1.0 SOLUM CO.,LTD.10/20 2.3.2 Exploded View Figure 4 Exploded View 2.4 Labels 2.4.1 Serial Number Information Serial 1, 2 Code Value 14 3 G S A A 2JW ① ② ③ ④ ⑤ ⑥ ⑦ ①Year : Last two digits of manufacturing year. (00 ~ 99, Example : 2014 is '14') ②Month : Manufacturing month(1 ~ 9, X(10), Y(11), Z(12)) ③Date : Manufacturing date(1 ~ 9, A(10) ~ V(31)) ④Vendor : Manufacturing vendor(D : DONGWAN, T : TSEM, etc) ⑤Line number : Manufacturing Line number
S-TAG Datasheet(ST-GM5800N)Preliminary REV 1.0 SOLUM CO.,LTD.11/20 ('A', 'B', 'C', etc) ⑥Revision : Product revision number(A : First, B : Second, C : Third, etc ) ⑦ZigBee IC Lot Number : Last 3 charactersProduct and Mac Label Drawings Figure 5 Product and Mac Labels Product information is indicated in a printed sticker label. The information consists of MODEL (model name), MFD (manufacturing date), S/N (serial number), MAC (MAC address), CE certification mark, FCC ID and Manufacture (SOLUM CO.,LTD.).1) Model Name : ST-GM5800N2) MFD : (Month).(Date).(Year) ex) May.16.20143) S/N : Serial Number Information4) MAC : barcode & barcode number(hexadecimal 16 digits) - 8 digits(1st ~ 8th) : xxxxxx (Tag I.D.) - 2 digits(9th ~ 10th) : 29 (Tag size & type) - 1 digit(11th) : x (Panel type) - 1 digit(12th) : x (Checksum)
S-TAG Datasheet(ST-GM5800N)Preliminary REV 1.0 SOLUM CO.,LTD.12/20 2.5 Barcode Scanning 2.5.1 Barcode Scanning Condition Typically Scan distance is 8 ~ 9cm and angle is horizontality Example) Item MODEL Distance Angle Scanner SYMBOL (DS6708-SR20007ZZR) 8~9cm Horizontality DATALOGIC (QUICKSCAN QD2430) 8~9cm Horizontality PDA Motorola (MC3190-SI2H04E0A) 8~9cm Horizontality Motorola (MC17T-00) 6cm 30º Motorola (MC4597-BAPBA0000) 8~9cm Horizontality M3 (NA8NWCNMH40078) 8~9cm Horizontality <Horizontality> <30º>
S-TAG Datasheet(ST-GM5800N)Preliminary REV 1.0 SOLUM CO.,LTD.13/20 3 Operation Test It will be updated before 2nd release. Below is just a sample. Equipments : Gateway (S-Gate), R/C (S-TAG), Jig for power supply Target DUT : EPD TAG Figure 6 Operation Test Test Scenario ①Install Tag on Jig②Ready to Gateway(S-Gate) and R/C③wake up Tag with R/C④Tag start to communicate with Gateway⑤Tag display the numeric information received from Gateway⑥Check Tag(EPD display status & MAC address value)⑦Wake up Tag with R/C⑧Check Tag(EPD display(blank display))Criterion (Below both two conditions should be all satisfied) ①Good : You can see ‘Black’ → ‘White’ display②Compare MAC address with that of label attached to Front or Back plane.
S-TAG Datasheet(ST-GM5800N)Preliminary REV 1.0 SOLUM CO.,LTD.14/20 4 ESL Operation by display It will be updated before 2nd release. Below is just a sample. Display State User Action STATE: 1 Initial display when shipped from the manufacturer (Blank display). None STATE: 1 No change. To assign a tag using a PDA STATE 1  2 Searching for GWs (MAC address, tag version and triangle). A tag woken up by an RC STATE 2  4 A tag is connected to a GW and received price (Price) None
S-TAG Datasheet(ST-GM5800N)Preliminary REV 1.0 SOLUM CO.,LTD.15/20 STATE 2  3 A tag failed to locate a GW (blank). STATE 4  5 When a tag is connected to a GW, and woken up by an RC, Next page display predefined. Display is end, tag wait 10 second wakeup signal by RC. When signal is detected in this time, immediately return first Page and Send Price Request to GW. No signal in this time, after 10 second return first Page and Same Operation. Woken up by an RC STATE 4  6 Connection to a GW is lost (price and Rectangle on upper right corner) None STATE 6  6 When connection is lost and woken up by an RC (blinks with the price and Rectangle) Starts to search GWs. Woken up by an RC
S-TAG Datasheet(ST-GM5800N)Preliminary REV 1.0 SOLUM CO.,LTD.16/20 STATE 4  1 Initial display (Blank display). To clear an assigned tag using a PDA
S-TAG Datasheet(ST-GM5800N)Preliminary REV 1.0 SOLUM CO.,LTD.17/20 5 Package
S-TAG Datasheet(ST-GM5800N)Preliminary REV 1.0 SOLUM CO.,LTD.18/20 6 Cautions for Treatment Provisions should be made to protect against any damage to the product caused by improper handling. It is highly recommended that the product should be installed within 3 months from the date of arrival in the logistics hub. Recommended storage condition is in 0-40 Celsius degree, 20-60% RH environment. This RF device operates on the 2.4GHz frequency band and can produce radio interference. The device, therefore, may not be used for applications where safety of human lives is concerned. 6.1 Usage Environment Take extra cautions when using this RF device in the vicinity of other electronic devices and appliances. Most electronic devices and appliances use electromagnetic waves. Electromagnetic waves emitted by this RF device can affect other electronic devices and appliances. If using the device in an explosion hazard area, follow all safety regulations, instructions, and signals. 6.2 Storage and Use Moisture and liquids can damage internal parts and circuit boards if allowed to enter into the device itself. Do not place or store the product on a sloped surface. The product may slide and fall off the surface and damaged. Use the product in temperatures ranging from 0℃ to +40℃. Parts and circuits may be damaged if used or stored under temperature extremes. The display panel needs extra care when handling. - Do not apply any impacts on outside since e-Paper display is fragile. - Continuous exposure to excessive moisture (over 60% RH) or UV makes display lifetime shortened. - Ghosting image may be appeared in temperature conditions of less than 15 Celsius degree. Avoid areas with strong magnetism or subject to magnetism. Contact between the device and a magnetic object can lead to malfunctions. Do not place the product near heat-producing kitchen appliances like a stove or a microwave or in the vicinity of highly pressurized containers.
S-TAG Datasheet(ST-GM5800N)Preliminary REV 1.0 SOLUM CO.,LTD.19/20 External impact to the product, such as from being dropped, can damage the product or battery casing can be separated. Twisting and bending the product can damage the exterior casing and the internal components. If this product operates abnormally in eliminating battery vinyl or replacing battery, you should discharge it by contacting battery terminal (+) and (-). This product uses 2.4GHz frequency band for wireless communication network. Radio communications can be limited or affected by other applications which share same frequency band, such as WiFi, Bluetooth, Zigbee, etc. Frequent communications, updates and screen renewals may reduce battery life time. 6.3 FCC FCC ID : 2AFWN-ST-GM5800NWARNING : This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, Including interference that may cause undesired operation. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver.
S-TAG Datasheet(ST-GM5800N)Preliminary REV 1.0 SOLUM CO.,LTD.20/20 - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Caution This device complies with FCC radiation exposure limits for an uncontrolled environment. Avoid operating this device at a distance less than 20cm form the user샜櫛샜샜샜샜샜雛샜샜 샜샜샜샜샜샜샜샜샜샜諛샜샜샜諛샜雛샜샜샜샜샜샜샜샜黛샜샜샜샜샜샜櫛샜櫛샜샜샜샜샜샜샜샜샜雛샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜跛샜雛샜샜샜샜샜샜샜샜諛샜雛샜샜샜샜雛샜샜샜샜샜샜샜샜샜샜샜雛샜샜샜샜샜샜샜 샜샜샜雛샜샜샜샜雛샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜諛샜샜샜샜샜샜샜샜샜샜샜샜샜샜諛샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜諛샜샜샜跛샜雛샜샜샜샜샜샜샜샜샜샜샜샜櫛샜샜샜샜샜雛샜샜 샜샜샜샜샜샜샜샜샜샜諛샜샜샜諛샜雛샜샜샜샜샜샜샜샜黛샜샜샜샜샜샜櫛샜櫛샜샜샜샜샜샜샜샜샜雛샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜跛샜雛샜샜샜샜샜샜샜샜諛샜雛샜샜샜샜雛샜샜샜샜샜샜샜샜샜샜샜雛샜샜샜샜샜샜샜 샜샜샜雛샜샜샜샜雛샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜諛샜샜샜샜샜샜샜샜샜샜샜샜샜샜諛샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜諛샜샜샜跛샜雛샜샜샜샜샜샜샜샜샜샜샜샜櫛샜샜샜샜샜雛샜샜 샜샜샜샜샜샜샜샜샜샜諛샜샜샜諛샜雛샜샜샜샜샜샜샜샜黛샜샜샜샜샜샜櫛샜櫛샜샜샜샜샜샜샜샜샜雛샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜跛샜雛샜샜샜샜샜샜샜샜諛샜雛샜샜샜샜雛샜샜샜샜샜샜샜샜샜샜샜雛샜샜샜샜샜샜샜 샜샜샜雛샜샜샜샜雛샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜諛샜샜샜샜샜샜샜샜샜샜샜샜샜샜諛샜샜샜샜샜샜샜샜샜샜샜샜샜샜샜諛샜샜샜跛샜雛샜샜샜샜샜샜샜샜샜샜샜

Navigation menu