SOLUM TBHH01AP1 BLE Beacon Device User Manual KEYCO Card Manual EN 170817 ver1 2
SOLUM CO.,LTD. BLE Beacon Device KEYCO Card Manual EN 170817 ver1 2
SOLUM >
Users manual
Quick Start
Guide
www.solu-m.com
Safety Precautions Warranty
Inquiry Regarding Service
Product Specification and Certificatio
Caution
20170817 EN Ver. 1.2
Failure to comply with the below may result in injury to the user
or failure/malfunction of the product.
Do not disassemble, repair, or modify the product without
the assistance of an authorized technician.
Care should be taken not to let children or pets suck or bite
the product.
Do not bend the product excessively or subject the product
to impacts.
Do not use while pressing yourself against metal. Due to the
sensitivity of wireless products to frequency bands, the
reception may become poor or disconnection from the
mobile phone may occur.
Do not use for purposes other than the instructed function.
Avoid exposing the product to water.
This device features electromagnetic compatibility for homes
(B grade) and is intended to be mainly used at home. It can
be used in any region.
This product is a product of SoluM Co., Ltd.
This product is shipped after internal quality control and
inspection.
The warranty period of this product is 1 year. If defects or failure
of the product occurs within 1 year, it will be repaired or
replaced free of charge, unless the defects or failure have
occurred due to the negligence of the user.
This product is a short-range wireless communication product
using Bluetooth, and no distance for connection is guaranteed.
Repair is not free of charge in the cases below, even within the
warranty period.
– Failure or damage due to the mishandling, deliberate actions,
or negligence (dropping, impact, breakage, submergence,
etc.) of a user
– Failure or damage due to disassembly, repair or modication
by the user
– Failure or damage due to usage for purposes other than the
original function
– Failure or damage due to uncontrollable environmental
factors (earthquake, fire, flood, lighting, etc.)
Fill out the warranty below at the time of purchase.
The warranty will not be reissued in the event of loss.
Rated Voltage 3 V
Model Name TBHH01AP1
Product Name Keyco Card
Date of Purchase (yyyy mm dd)
Vendor
Warranty Period 1 year
Manufacturer /
Country of Manufacture SoluM Co., Ltd. (Korea) / China
2.4 GHz ISM Band Bluetooth Low Energy 4.2
Communication
Method
85.6 x 53.98 x 1.2 (mm)Dimension
200 mAh Li-Manganese Dioxide
Non-Rechargeable Battery
Battery
-10 °C – 50 °C
Operating
Temperature
Metal Dome SwitchButton
If you have any diculty in using Keyco, please refer to this manual.
For further questions and technical support, please contact us to
visit our website on www.keyconder.com/support.
MSIP-CRI-SLU-TBHH01AP1
2AFWN-TBHH01AP1
Product Configuration How to install Keyco Finder app Main Features
How to Connect to your Smartphone
Name of Components
Things to Know before Usage
Keyco card Quick Start Guide
Multi-Purpose button
See the location of a
smartphone
Camera remote
Operation Stand-By mode
(press 3 seconds)
Use the product only in the country where it is purchased.
Performance and quality of the product are not guaranteed
in other countries.
Due to the characteristics of Bluetooth technology, the
distance that can be connected to a smartphone may vary
according to the user environment.
The actual components may differ from the illustration.
The appearance and specifications of the product is subject
to change without notice to improve performance.
This product is optimized for Google Android 4.4 or higher
and Apple OS 8.0 or higher.
Keyco card is a battery-consuming type product in which the
battery cannot be replaced. The battery will last up to 2 years.
Battery consumption may vary depending on the conditions
of use and the environment.
When not in use for a long period of time, change to the
Operation Stand-By mode to lower the battery consumption.
(Press the Multi-Purpose button for 3 seconds)
Detailed use of each function can be found in the manual in the
Keyco Finder app or the homepage.
Keyco Finder app → Menu button ( ) → Tap User Manual
www.keycofinder.com
First, you must register the product on the Keyco Finder app to
use the Keyco card.
You must install the Keyco Finder app to use the Keyco card.
Access the Play store on your smartphone.
For iPhone users, access the App Store.
Type ‘Keyco Finder’ in the search box.
Select Keyco Finder in the list, and tap Install.
Run ‘Keyco Finder’ on your smartphone.
Tap Next then select the Keyco card on the screen.
Follow the guide on the screen to register the Keyco card.
Out of Range Alarm
Guide to finding a lost smartphone
Into Range Alarm
Camera Button
Finding a Smartphone
Prevent loss by emitting a sound
when the smartphone and Keyco
card are separated for more than a
certain distance (around 10 m)
Setting 'Out of Range
Notification'
A sound is emitted to notify that
the Keyco card registered to the
smartphone is within a certain
range
Setting ‘Into Range
Notification'
When using a camera on the Keyco
Finder app, photos and/or videos
can be taken by pressing the
button on the Keyco card
Tap on Keyco Finder
Identify the location where the
item to which the Keyco card is
attached is lost on the map in the
Keyco Finder app
Check the map on the
smartphone
Identify the location of a
smartphone by sounding an alarm
when the smartphone to which
the Keyco card was registered is
not visible
Press the Multi-Purpose
button on the Keyco card
FCC Information
This device complies with part 15 of the FCC Results. Operation is subject to the
following two conditions :
(1) This Device may not cause harmful interface, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for CLASS B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try
correct the interference by one or more of the following measures:
1.1. Reorient or relocate the receiving antenna.
1.2. Increase the separation between the equipment and receiver.
1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is
connected.
1.4. Consult the dealer or experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
“CAUTION : Exposure to Radio Frequency Radiation.
Antenna shall be mounted in such a manner to minimize the potential for human
contact during normal operation. The antenna should not be contacted during operation
to avoid the possibility of exceeding the FCC radio frequency exposure limit.