SOLiD 800PS900IPA RDU MODULE(800PS/900I/PA) User Manual 1

SOLiD, Inc. RDU MODULE(800PS/900I/PA) Users Manual 1

Users Manual 1

Confidential & Proprietary 1/87 SMDR-NH124 Installation and Operation Manual Document Reference: Version: V1.0 Document Status: Release 1 Issue Date: Jan. 02, 2009 Author: K,E,HAN Department: SOLiD Technology Authorizing Manager: Youngshin Yeo
Confidential & Proprietary 2/87 REVISION HISTORY Version Issue Date No. of Pages Initials Details of Revision Changes V 1.0 Jan. 02, 2009 Original Technical Support SOLiD serial numbers must be available to authorize technical support and/or to establish a return authorization for defective units. The serial numbers are located on the back of the unit, as well as on the box in which they were delivered. Additional support information may be obtained by accessing the SOLiD Tehcnology, Inc. website at www.st.com or send email at sjkim@st.co.kr. This manual is produced by Global Business Division Business Team 1. Printed in Korea.
Confidential & Proprietary 3/87 Contents Section1 Safety & Certification Notice................................................................... 8 Section2 System Overview ...................................................................................10 2.1 General overview ......................................................................................... 11 2.2 System overview.......................................................................................... 12 Section3 System Specifications........................................................................... 14 3.1 System specifications ................................................................................. 15 3.1.1 Physical Specifications......................................................................... 15 3.1.2 Optic wavelength and Laser power...................................................... 16 3.1.3 Environmental specifications ............................................................... 16 3.1.4 Operating Frequencies range............................................................... 16 3.1.5 Specifications Per band ........................................................................ 17 Section4 System Configuration and Functions.................................................. 20 4.1 BIU (BTS Interface Unit) .............................................................................. 21 4.1.1 Specifications of BIU............................................................................. 21 4.1.2 Block diagram of BIU............................................................................. 22 4.1.3 BIU parts ................................................................................................. 22 4.1.4 Function by unit..................................................................................... 23 4.1.5 Front/rear panels of BIU........................................................................ 27 4.2 ODU (Optic distribution Unit)...................................................................... 29 4.2.1 Specifications of ODU ........................................................................... 29 4.2.2 Block Diagram of ODU .......................................................................... 30 4.2.3 ODU parts ............................................................................................... 30 4.2.4 Function by unit..................................................................................... 30 4.2.5 Front/rear panels of MHU...................................................................... 30 4.2.6 Interface with BIU .................................................................................. 30 4.3 OEU (Optic Expansion Unit)........................................................................ 30 4.3.1 Specifications of OEU ........................................................................... 30 4.3.2 Block Diagram of OEU........................................................................... 30 4.3.3 OEU parts ............................................................................................... 30 4.3.4 Function by unit..................................................................................... 30 4.3.5 Front/rear panels of OEU ...................................................................... 30 4.4 ROU (Remote Optic Unit) ............................................................................ 30
Confidential & Proprietary 4/87 4.4.1 Specifications of ROU ........................................................................... 30 4.4.2 Block Diagram of ROU .......................................................................... 30 4.4.3 ROU parts ............................................................................................... 30 4.4.4 Function by unit..................................................................................... 30 4.4.5 Bottom of ROU....................................................................................... 30 Section5 System Installation & Operation........................................................... 30 5.1 BIU Installation............................................................................................. 30 5.1.1 BIU Shelf Installation............................................................................. 30 5.1.2 BIU Power Cabling................................................................................. 30 5.1.3 RF Interface at BIU................................................................................. 30 5.1.4 MDBU insertion...................................................................................... 30 5.1.5 ODU Interface......................................................................................... 30 5.1.6 Consumption Power of BIU .................................................................. 30 5.2 ODU Installation ........................................................................................... 30 5.2.1 ODU Shelf Installation ........................................................................... 30 5.2.2 ODU Power Cabling............................................................................... 30 5.2.3 ODU Optic Cabling................................................................................. 30 5.2.4 Insert DOU to ODU................................................................................. 30 5.2.5 Consumption Power of ODU................................................................. 30 5.3 ROU Installation ........................................................................................... 30 5.3.1 ROU Enclosure installation................................................................... 30 5.3.2 ROU Power Cabling............................................................................... 30 5.3.3 Optical Cabling ...................................................................................... 30 5.3.4 Insertion of RDU..................................................................................... 30 5.3.5 Consumption of RDU............................................................................. 30 5.4 OEU Installation ........................................................................................... 30 5.4.1 OEU Shelf installation ........................................................................... 30 5.4.2 OEU Power Cabling ............................................................................... 30 5.4.3 OEU Optic Cabling................................................................................. 30 5.4.4 Insert DOU to OEU................................................................................. 30 5.4.5 Consumption Power of OEU................................................................. 30 5.5 System Operation and Alarm Status.......................................................... 30 5.5.1 System setting and operation............................................................... 30 5.5.2 BIU Alarms.............................................................................................. 30 5.5.3 ODU Alarms............................................................................................ 30 5.5.4 OEU Alarms............................................................................................ 30
Confidential & Proprietary 5/87 5.5.5 ROU Alarms............................................................................................ 30
Confidential & Proprietary 6/87 Contents of Figure Figure 2.1 – Basic system topology ........................................................... 12 Figure 2.2 – Expansion system topology................................................... 13 Figure 4.1 – BIU outer view ......................................................................... 21 Figure 4.2 – BIU mounting diagram............................................................ 22 Figure 4.3 – MDBU Outer Look ................................................................... 25 Figure 4.4 – MDBU Outer Look ................................................................... 25 Figure 4.5 – MCCU Outer Look ................................................................... 26 Figure 4.6 – MPSU Outer Look.................................................................... 27 Figure 4.7 – BIU front panel Outer Look.....................................................27 Figure 4.8 – Rear panel Outer Look............................................................ 28 Figure 4.9 – ODU Outer Look ...................................................................... 29 Figure 4.10 – ODU Inner Look..................................................................... 30 Figure 4.11 – MDBU Outer Look.................................................................. 30 Figure 4.12 – 2Way Divider Outer Look...................................................... 30 Figure 4.13 – BIU front panel Outer Look...................................................30 Figure 4.14 – Rear panel Outer Look.......................................................... 30 Figure 4.15 – Interface between MHU and ODU ........................................30 Figure 4.16 – OEU Outer Look ....................................................................30 Figure 4.17 – OEU Inner Look ..................................................................... 30 Figure 4.18 – MDBU Outer Look .................................................................30 Figure 4.19 – EWDM Outer Look................................................................. 30 Figure 4.20 – ECPU Outer Look .................................................................. 30 Figure 4.21 – ERFM Outer Look.................................................................. 30 Figure 4.22 – ERFM Outer Look.................................................................. 30 Figure 4.23 – OEU front panel Outer Look................................................. 30 Figure 4.24 – Rear panel Outer Look.......................................................... 30 Figure 4.25 – ROU Outer Look .................................................................... 30 Figure 4.26 – ROU Inner Look..................................................................... 30 Figure 4.27 – RDU Outer Look ....................................................................30 Figure 4.28 – R OPTIC Outer Look.............................................................. 30 Figure 4.29 – RCPU Outer Look.................................................................. 30 Figure 4.30 – Multiplexer Outer Look ......................................................... 30 Figure 4.31 – RU Bottom Look.................................................................... 30 Figure 5.1 – RACK Installation .................................................................... 30
Confidential & Proprietary 7/87 Figure 5.2 – 800PS BDA Interface using Circulator .................................. 30 Figure 5.3 – 800PS BDA Interface using Duplexer....................................30 Figure 5.4 – Optical cable of SC/ACP Type................................................30 Figure 5.5 – How to install ROU ..................................................................30 Figure 5.6 – Dimension used to install ROU on the WALL....................... 30 Figure 5.7 – Optical cable of SC/ACP Type................................................30
Confidential & Proprietary 8/87 Section1 Safety & Certification Notice
Confidential & Proprietary 9/87 “Only qualified personnel are allowed to handle this unit. Read and obey all the warning labels attached in this user manual” Any personnel involved in installation, operation or service of the SOLiD Technology repeaters must understand and obey the following: - Obey all general and regional installation and safety regulations relating to work on high voltage installations, as well as regulations covering correct use of tools and personal protective equipment. - The power supply unit in repeaters contains dangerous voltage level, which can cause electric shock. Switch the mains off prior to any work in such a repeater. Any local regulations are to be followed when servicing repeaters. - The repeater cover should be (door) securely fastened in open position, e.g. by tying it up, at outdoor work in order to prevent door from slamming due to wind causing bodily harm or damage. - Use this unit only for the purpose specified by the manufacturer. Do not carry out any modifications or fit any spare parts which are not sold or recommended by the manufacturer. This could cause fires, electric shock or other injuries. - Any repeater, including this repeater, will generate radio signals and thereby give rise to electromagnetic fields that may be hazardous to the health of any person who is extensively exposed to the signals at the immediate proximity of the repeater and the repeater antennas. - Due to power dissipation, repeater may reach a very high temperature. Do not operate this unit on or close to flammable materials. - Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives. - Certification z FCC : This equipment complies with the applicable sections of Title 47 CFR Parts 15,22,24 and 90 - Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. z UL/CUL : This equipment complies with UL and CUL 1950-1 Standard for safety for information technology equipment,including electrical business equipment z FDA/CDRH : This equipment uses a Class 1 LASER according to FDA/CDRH Rules.This product conforms to all applicable standards of 21 CFR Chapter 1, Subchaper J, Part 1040
Confidential & Proprietary 10/87 Section2 System Overview 2.1 General overview 2.2 System overview
Confidential & Proprietary 11/87 2.1 General overview SMDR-NH124 is a coverage system for in-building services delivering voice and data in high quality and for seamlessly. As a distributed antenna system, it provides analog and digital phone systems that are served in multiple bands through one antenna. The system covers general public institutions and private facilities. z Shopping malls z Hotels z Campus areas z Airports z Clinics z Subways z Multi-use stadiums, convention centers, etc. The system helps improve in-building radio environments in poor condition and make better poor RSSI and Ec/Io. By providing communication services at every corner of buildings, the system enables users to make a call at any site of buildings. The system uses both analog (AMPS) and digital (TDMA, CDMA and WCDMA) methods. The SMDR-NH124 system supports communication standards and public interface protocols in worldwide use. z Frequencies: VHF,UHF, 700MHz, 800MHz,850MHz 900MHz,1900MHz,2100MHz, etc. z Voice protocols: AMPS,TDMA, CDMA,GSM,IDEN, etc. z Data protocols: EDGE,GPRS,WCDMA,CDMA2000,Paging, etc. SMDR-NH124 is in modular structure per frequency. To provide desired frequency in a building, all you need to do is to insert a corresponding frequency module into each unit. As it delivers multiple signals with one optical cable, the system, in one-body type, does not require additional facilities whenever new frequency is added. The system is featured with the following: z Flexibiltiy & Scalabiltiy  Support fiber-optic ports up to 39  Clustering multiple-buildings (campus) as one coverage z Modular structures  Modular frequency upgrade  Plug-in type module z Multi-Band, Multi Operator
Confidential & Proprietary 12/87  Signals with a plurality of service provider transmit simultaneously  Support multi-operator in a band z Low OPEX / CAPEX  Compact design  Upgradable design  Easy installation and maintenance  Web Based SNMP or GSM Modem or UDP support (Optional) 2.2 System overview SMDR-NH124 is composed of devices given below. Basically, the system consists of BIU (BTS Interfcace Unit), ODU (Optic distribution Unit) and ROU (Remote Optic Unit). For addition of more ROUs, it has OEU (Optic Expansion Unit). Figure 2.1 – Basic system topology
Confidential & Proprietary 13/87 Figure 2.2 – Expansion system topology Table 3.1 – System topology Charts System elements Optical Loss [dBo] Max. RUs BIU – ODU(DOUx1) – ROU 1~5dBo 4 BIU – ODU(DOUx2) – ROU 1~5dBo 8 BIU – 4ODU(DOUx2) – ROU 1~5dBo 32 BIU – 4ODU(DOUx2)-OEU(DOUx2) – ROU 1~5dBo 39
Confidential & Proprietary 14/87 Section3 System Specifications 3.1 System specifications 3.1.1 Physical Specifications 3.1.2 Optic wavelength and Laser power 3.1.3 Environmental specifications 3.1.4 Operating Frequencies range 3.1.5 Specifications Per band
Confidential & Proprietary 15/87 3.1 System specifications 3.1.1 Physical Specifications Parameter BIU ODU OEU ROU RF Connectors 4 SMA type, female (Per MDBU) 2 SMA type, female - 1N-type,female External Alarm connector (Dry contacts) Terminal block,3pcs - - - Serial Interface connector 1 RS-232 9-pin D-sub, male 1 RS-232 9-pin D-sub, male 1 RS-232 9-pin D-sub, male Fiber connector - 8pcs, SC/APC for ROU 1 SC/APC for ODU 8 SC/APC for ROU 1 SC/APC for ODU LED Alarm and Status Indicator MDBU Status z Power On status z ALM status MCPU z Power On status z TX Communication z RX Communication z ALM status MPSU z Power On status z DC ALM status DOU1 Status z LD status z PD1/2/3/4 status DOU2 Status z LD status z PD1/2/3/4 status EWDM Status z LD status z PD status DOU1 Status z LD status z PD1/2/3/4 status DOU2 Status z LD status z PD1/2/3/4 status System status z Power on status z TX Communication z RX Communication System status z Power on statusz TX1 Communication z RX1 Communication z TX2 Communication z RX2 Communication z ALM status AC Power - - Normal Range : 120VAC 50/60Hz Operating range 108~132VAC,50/60HzDC Power Normal range: -48 VDC Operating range: -40.8 ~ -57.6VDC - Normal : -48 VDC Operating range: -40.8 ~ -57.6VDC Power consumption 168W (Including ODU 4EA) - 48W (Including DOU2EA) 265W (Including RDU 3EA) Enclosure Dimensions 482.6(19”) x 221.5(5U) x 450 482.6(19”) x 43.6(1U) x 450 482.6(19”) x 88.1(2U) x 450 420 x 530 x 258 Weight[Full Load] 22.25Kg 5.7Kg 9.3Kg 35.45Kg
Confidential & Proprietary 16/87 3.1.2 Optic wavelength and Laser power Parameter ODU OEU ROU Wavelength TX: 1310nm RX: 1550nm West optic TX: 1550nm RX: 1310nm East optic TX: 1310nm RX: 1550nm TX: 1550nm RX: 1310nm Output power 3dBm±1dBm to ROU,OEU 3dBm±1dBm to ROU 7dBm±1dBm to ODU 7dBm±1dBm to ODU 3.1.3 Environmental specifications Parameter BIU, ODU, OEU ROU Operating Temperature -10 to +50°C -10 to +50°C Operating Humidity, non condensing - 5% to 90% 3.1.4 Operating Frequencies range Frequency range Standard Unit naming Description TX(MHz) RX(MHz) iDEN 700P Public safety 764 to 776 794 to 806 iDEN 800P Public safety 851 to 869 806 to 824 Cellular 850C Cellular 869 to 894 824 to 849 Iden 900I SMR 929 to 940 896 to 902 Paging 900 PA Paging 929 to 930 896 to 902 PCS 1900P PCS 1930 to 1995 1850 to 1915 AWS-1 AWS-1 AWS-1 2110 to 2155 1710 to 1755
Confidential & Proprietary 17/87 3.1.5 Specifications Per band 700MHz Public safety Typical Remarks Parameters TX RX Bandwidth 12MHz 12MHz System ripple ≤4dB ≤4dB Input Power level -20 to +10dBm ≤-50dBm Output power +23dBm +0dBm Total System Gain 43dB 50dB Gain Control range 18 to 43dB 30 to 50dB IMD 50dBc - IP3 - +25dBm Noise figure - 15dB 1ROU 800MHz Public safety Typical Remarks Parameters TX RX Bandwidth 18MHz 18MHz System ripple ≤4dB ≤4dB Input Power level -20 to +10dBm ≤-50dBm Output power +23dBm +0dBm Total System Gain 43dB 50dB Gain Control range 18 to 43dB 30 to 50dB IMD 50dBc - IP3 - +25dBm Noise figure - 15dB 1ROU
Confidential & Proprietary 18/87 850MHz Cellular Typical Remarks Parameters TX RX Bandwidth 25MHz 25MHz System ripple ≤4dB ≤4dB Input Power level -20 to +10dBm ≤-50dBm Output power +23dBm +0dBm Total System Gain 43dB 50dB Gain Control range 18 to 43dB 30 to 50dB IMD 50dBc - IP3 - +25dBm Noise figure - 15dB 1ROU 900MHz iDEN & Paging Typical Remarks Parameters TX RX Bandwidth 12MHz 6MHz System ripple ≤4dB ≤4dB Input Power level -20 to +10dBm ≤-50dBm Output power +23dBm +0dBm Total System Gain 43dB 50dB Gain Control range 18 to 43dB 30 to 50dB IMD 50dBc - IP3 - +25dBm Noise figure - 15dB 1ROU
Confidential & Proprietary 19/87 1900MHz PCS Typical Remarks Parameters TX RX Bandwidth 65MHz 65MHz System ripple ≤5dB ≤5dB Input Power level -20 to +10dBm ≤-50dBm Output power +26dBm +0dBm Total System Gain 46dB 50dB Gain Control range 21 to 46dB 30 to 50dB IMD 50dBc - IP3 - +25dBm Noise figure - 15dB 1ROU 1700MHz&2100MHz AWS-1 Typical Remarks Parameters TX RX Bandwidth 45MHz 45MHz System ripple ≤5dB ≤5dB Input Power level -20 to +10dBm ≤-50dBm Output power +26dBm +0dBm Total System Gain 46dB 50dB Gain Control range 21 to 46dB 30 to 50dB IMD 50dBc - IP3 - +25dBm Noise figure - 15dB 1ROU
Confidential & Proprietary 20/87 Section4 System Configuration and Functions 4.1 BIU (BTS Interface Unit) 4.2 ODU (Optic distribution Unit) 4.3 OEU (Optic Expansion Unit 4.4 ROU (Remote Optic Unit)
Confidential & Proprietary 21/87 4.1 BIU (BTS Interface Unit) BIU provides TX signals from BTS or BDA for four ODUs (Optic Distribution Unit). This unit separates RX signals given from ODUs from each other per frequency band. Figure 4.1 – BIU outer view 4.1.1 Specifications of BIU Item Spec. Remark Size 482.6(19”) x 221.5(5U) x 450 mm Weight 22.35 Kg Power consumption 168 W Full Load
Confidential & Proprietary 22/87 4.1.2 Block diagram of BIU 4.1.3 BIU parts Figure 4.2 – BIU mounting diagram No. Unit Description Remark1 MDBU Main Drive BTS Unit Amplify & adjust downlink RF signal Amplify & adjust uplink RF signal Max 4EA
Confidential & Proprietary 23/87 2 MCDU Main Com/Div Unit Combine 4EA downlink signal and divide 4EA signal to ODU Combine 4EA uplink signal and divide 4EA signal to MDBU Support VHF/UHF interface port 3 MCPU Main Central Processor Unit Control and monitoring system status Control and monitoring with RS232 Have an access to upper-level network through GSM or Ethernet 4 MPSU Main Power Supply Unit Input power: DC -48V, Output power: 9V, 6V 5 M/B Mother Board Provide signal interface and power for each unit Provide three ports for dry contact 6 Shelf 19 inch, 5U 4.1.4 Function by unit 1) Main Drive BTS Unit (MDBU) MDBU delivers TX signals of BTS or BDA to related devices and then delivers RX signals of the devices to BTS or BDA. This unit can monitor TX input level. Using input AGC function, it automatically adjusts input ATT. It also has ATT to adjust RX gain. MDBU is varied per frequency band including the following: In/out RF Port No Unit naming Description TX RX 1 800PS Single Band 2 Port 2 Port 2 850C Single Band 2 Port 2 Port 3 1900P Single Band 4 Port 4 Port 4 AWS-1 Single Band 4 Port 4 Port 5 800PS+900I+PA Dual Band 4 Port 4 Port 6 850C+700PS Dual Band 4 Port 4 Port 7 TBD
Confidential & Proprietary 24/87 800PS 800PS+900I+Paging 1900PCS AWS-1
Confidential & Proprietary 25/87 Figure 4.3 – MDBU Outer Look 2) Main Com/Div Unit (MCDU) MCDU combines TX signals that are delivered from MDBU per frequency band and delivers the signals to four ODUs. This unit adds signals of FSK modem to the TX signals before sending them to ROU. It also combines RX signals from up to four ODUs and sends them to up to four MDBUs. In this case, the unit extracts signals of FSK modems, which are sent in a combined form with RX signals, and then delivers the signals to MCU. The unit has a port to interface with VHF&UHF signals. It has ATT for input monitoring and input control. Figure 4.4 – MDBU Outer Look 850C 850C+700PS
Confidential & Proprietary 26/87 3) Main Central Processor Unit (MCPU) MCPU can inquire and control state of modules that are installed in BIU. This unit can inquire and control state of four ODUs in total. Through communication, it also can inquire and control ROU that is connected with lower parts. In addition, the unit has RS-232C port for serial communication so that it can inquire and control state of devices through PC. On the front panel, it has communication LED indicator to check communication state with ROU. It also has ALM LED indicator to show whether a device gets faulty. For access to upper network, it has a port to insert Ethernet port and GSM modem in it. Figure 4.5 – MCCU Outer Look In the Main Central Processor Unit, a lithium battery is installed for RTC (Real Time Control) function. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DIPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS [INSTRUCTION] The equipment and accessories including inner lithium battery are to be disposed of safely after the life span of them and national regulation must be observed. Do not attempt to replace the lithium battery unless service personnel confirmation has first been obtained, to avoid any risk of explosion. 4) Main Power Supply Unit (MPSU)
Confidential & Proprietary 27/87 MPSU receives -48V of input and outputs +6V and +9V of DC power. On the front panel, this unit has an output test port and it also has DC ALM LED Indicator to show whether output gets faulty. Figure 4.6 – MPSU Outer Look 4.1.5 Front/rear panels of BIU 1) Front panel Figure 4.7 – BIU front panel Outer Look Item Description 1. MDBU LED LED to show whether MDBU is installed and gets faulty
Confidential & Proprietary 28/87 2. RF Monitor Port 20dB Coupling compared with TX Input Level 20dB Coupling compared with RX Output Level 3. Alarm LED & Reset Communication state with devices, alarm status of the system and reset switch 4. NMS(RS-232C port) RS-232C port for communication and diagnosis of devices through PC/laptop 5. NMS(Ethernet port) Ethernet port for upper network This equipment is indoor use and all the communication wirings are limited to inside of the building 6. Pwr Test Port & ALM Output DC power test port and ALM LED to show abnormal state, if any 7. Power switch Power ON/OFF switch 2) Rear panel Figure 4.8 – Rear panel Outer Look Item Description 1. External ALM Port Input/output terminal for dry contact 2. GSM Modem Port GSM Modem terminal for upper network (Optional) 3. V/UHF I/O Port RF signal interface terminal of VHF&UHF 4. ODU I/O Port RF signal interface terminal for ODU 5. ODU signal Port Power and signal interface terminal for ODU 6. BTS/BDA I/O Port Input/output interface terminal of BTS/BDA
Confidential & Proprietary 29/87 7. GND Port System ground terminal 8. DC Input Port Input terminal for DC -48V 4.2 ODU (Optic distribution Unit) ODU receives TX RF signals from upper BIU and converts them into optical signals. The optical signals are sent to ROU through optical cables. This unit converts optical signals from ROU into RF signals and sends the converted signals to BIU. For each shelf of the ODU, up to two DOUs (Donor Optic Unit) can be installed in it. One DOU is supported with four optical ports. Therefore, one ODU can be connected with eight ROUs. Up to four ODUs can be connected with BIU. Figure 4.9 – ODU Outer Look 4.2.1 Specifications of ODU Item Spec. Remark Size 482.6(19”) x 43.6(1U) x 450 mm Weight 5.7 Kg Power consumption 27 W Full Load
Confidential & Proprietary 30/87 4.2.2 Block Diagram of ODU 4.2.3 ODU parts Figure 4.10 – ODU Inner Look

Navigation menu