SQT Electronics SK626AG 2.4G Wireless Keyboard User Manual SK 626AG SPEC
Shenzhen SQT Electronics Co., Ltd. 2.4G Wireless Keyboard SK 626AG SPEC
User Manual
- Full size slim wireless keyboard
- Totally Wireless freedom
- 2.4GHz FSK Autolink technology
- 34 two way R F channels
- Operation distance of 6~10 meters for mouse and keyboard
- Nano receiver for this combo
SK-626AG RF2.4GHz Keyboard
SPECIFICATIONS
Par t 1.0: General Features
Par t 2.0: Physical characteristics
Operating force of wheel scrolling 20 10gf
Buttons
Weight:
Par t 3.0: Electrical Specification
Battery
Par t 4.0: Reliability
Operating temperature: -5 ~ 40 degrees celsius
Operating humidity: 20% - 90%
REV: 1.00
Par t 5.0 System Requirement
Windows 2000, Windows xp. Windows ME.
Windows VISTA, Windows 7/8/10
Operating force of keyboard keycaps 60 15gf
Keyboard : 86 standard keys,
Keyboard Button Switch Activation: 8,000,000 cycle
Keyboard:Operating Mode: 6 mA
Interface : USB 1.1
Sensor report rate on mouse: times per second 3000
Operation angle: 360 degrees
Operation distance: 6~10 meter for keyboard and
mouse
Receiver power requirement: 5V DC from USB port
R F frequency: 2.4 Ghz (2.408~2.474 Ghz)
R F modulation : F S K Auto-Link
Hopping type : FHSS (frequency hopping spread
spectrum)
R F channel : 34 channels
R F bandwidth : 2.0mHz
Speed of transmit: 1M bps
R F output power : 0dBm
Receiver of sensitive: -85dBm
SK-626AG
Mechanical Performance
Keyboard
Keyboard: 516.2 5 g (battery included)
Receiver: 2 1 g
Multimedia Hotkeys functions:
Battery type: twoAAAalkaline for keyboard
Battery consumption:
RECEIVER
keyboard:3.0V
FN+ESC=Media Player
FN+F1=Play/Pause
FN+F2=Previous Track
FN+F4=Volume Up
FN+F3=Next Track
FN+F6=Mute
FN+F7=Web home
FN+F5=Volume Down
FN+F8=Search
FN+F9=M y Favorite
FN+F10= Email
FN+F11=Screen Lock
FN+F12= My computer
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.