STANLEY GMT Hardware TSTBT02 Bluetooth Adapter User Manual Stanley BTA User Guide
STANLEY GMT Hardware Co., LTD. Bluetooth Adapter Stanley BTA User Guide
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2193084 |
| Application ID | x1OLZwulV16slu/ZzQy1tw== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 12.88kB (161014 bits) |
| Date Submitted | 2014-02-18 00:00:00 |
| Date Available | 2014-02-18 00:00:00 |
| Creation Date | 2013-12-27 10:39:26 |
| Producing Software | GPL Ghostscript 9.07 |
| Document Lastmod | 2014-02-10 11:14:03 |
| Document Title | Stanley BTA User Guide |
| Document Creator | PDFCreator Version 1.7.1 |
| Document Author: | JXC0323 |
Stanley BTA User Guide Bluetooth Adapter User's Guide Features Fully qualified Bluetooth® version 2.1 module, supports version 2.1 + EDR. Backwards-compatible with Bluetooth version 2.0,1.2, and 1.1. Low power consumption. . UART SPP data connection interface. RS-232 communication interface. Sustained SPP data rates: 19200bps and 38400bps. Support for 802.11 Co-Existence. Size: 64mm x 26mm x 20mm. Environmentally friendly, RoHS compliant. Applications Cable replacement Measurement and monitoring systems Industrial sensors and controls Description The Stanley bluetooth adapter is designed to meet the Stanley Automatic-door application. The Stanley Automatic-door can accquire wireless capability when using this bluetooth adapter, it make configuring the door easier and more convenient by a mobile phone or notebook with bluetooth over the air. Also, we can use a mobile device with bluetooth to configure the bluetooth adapter over-the-air RF,so it is ideal to be used to cable replacement. Simpler hardware connection,4-pin RJ14 hardware communication interface, a 4P cross-over telephone wire needed only. Two LEDs show the bluetooth adapter ( BTA ) work state and power status. 1/3 Stanley BTA User Guide Block Diagram Electrical Characteristics Absolute Maximum Ratings: Parameter Min Max Supply Voltage(DC) 3.8V 13V Supply Current 100mA Carrier Frequency 2402Mhz 2480Mhz Storage Temperature -40 ℃ +80 ℃ Storage Relative Humidity 90% Recommended Operating Condition: Parameter Min Max Supply Voltage(DC) 5V 12V Operating Temperature Range -20 ℃ +75 ℃ Communication Connector RJ14 Pin Name GND TX RS-232 driver output RX RS-232 recevier input PWR 2/3 Description Ground 5-12V Supply power Stanley BTA User Guide BTA COM PORT SETTINGS Setting Value Baud rate 19200 or 38400 bps Data rate 8 bits Parity None Stop bits Flow control None LED Status The adapter has two LEDs to show its work state. The one is red, the other is blue. the red LED will be solid on when the supply power is good. The blue LED indicates the BTA different work mode at different blink rate. Blue LED status show as below: Mode Blue LED Blink Rate Inquiring/Idle 1HZ Connecting 5HZ Connected Solid on 3/3 FCC STATEMENT: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. - English: " This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device." - French:" Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareil s radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil nedoit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement." Industry Canada Statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. Avis d’Industrie Canada Cet appareil est conforme à la norme CNR-210 des règlements d’Industrie Canada. Son fonctionnement est sujet aux deux conditions suivantes: 1) Cet appareil ne doit pas provoquer d’interférences et 2) Cet appareil doit accepter toutes les interférences, y compris celles pouvant entraîner son dysfonctionnement. Avis d’Industrie Canada sur l’exposition aux Rayonnements: Cet appareil est conforme aux limites d’exposition aux rayonnements d’Industrie Canada pour un environnement non contrôlé.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : GPL Ghostscript 9.07 Keywords : Modify Date : 2014:02:10 11:14:03+08:00 Create Date : 2013:12:27 10:39:26+08:00 Creator Tool : PDFCreator Version 1.7.1 Metadata Date : 2014:02:10 11:14:03+08:00 Document ID : uuid:9cc85d1f-70fb-11e3-0000-286ef4e56162 Instance ID : uuid:fe900cd2-6595-4ff4-8b18-ccc7a9c25b5a Format : application/pdf Title : Stanley BTA User Guide Creator : JXC0323 Description : Description (x-repair) : Page Count : 6 Author : JXC0323 Subject :EXIF Metadata provided by EXIF.tools