STEELMATE BSE0001 Tire Pressure Monitoring System User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	1687932
Application ID	fShSu31GK4Jrx1X4dPOgOQ==
Document Description	User Manual-1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	199.55kB (2494436 bits)
Date Submitted	2012-05-02 00:00:00
Date Available	2012-05-02 00:00:00
Creation Date	2012-05-02 14:18:45
Document Lastmod	2012-05-02 14:18:45
Document Title	User Manual-1

STEELMATE TP-81
Automotive
TI'MS for truck
Tire pressure monitoring system
WM}? fibfimflz Shelf-mg)
User's Manual
important notice -
About the product
Key ieatures ,
Technical specifications
Brief lock al LCD dispiay —
Symbols on the LCD dispiay ,
Parameter sellings
Setting mode
Day iight moda
Dispiaytum cnioit- -
Tire information query ,
Sensors programming ,
How does the system work
mmflflflhwwmnmw-x
Installation Manual
Pmducl components 11
11
12
13
13
15
16
is
17
About the TPMS sensur
Display instaiiation
Repeater instaiiaiicn
instaiiaiicn oi lire sensors ,
System insiaiiation diagram ,
Troubie shooting
warranty terms -
Warranty card
TPMS
User's Manual
Important no ce
This umi Is for yehicies with 12/24 vnc.
This unit shouid be installed by a professionai
technician according to the instaiiation
instruction
TPMS (tire pressure monitoring system) is
designed to heip the driver to monitor me tire
irrsgularmss K is (he drivel‘s rssponsib |y to
react promptly to alerts. Abnormal tire pressure
shcuid be corrected ASAP.
TPMS is a wireiess RF product, lherelorei il
may not receive signais due to the poor
environment, RF interierence, icw sensor
battery or a damaged sensor
This deyice complies with part is at the FCC
ruies. Operation is subiect to the toiiowing two
conditions
1This device may Viol cause harmiui
inlerierence
2.Th|s devrce must accept any interference
received inciuding interference that may cause
undesired operation.
Note:
changes or modifications made to this
equipment not expressly approved by
(Guangdong steeimate Security Co., Ltd)
May void the FCC authoriution to operation
this equipment
About the product Technical specifications Brief look at LCD display Symbols on the LC splay
Tire Pressure Monitoring System UPS” is a
wireless RF sensing device designed to measure
and display the tire pressure and temperature
Once installed in your truck or bus, the system will
automatically monitor tires in realtime for pressure
and temperature When any tire's pressure
and/or temperature are atrncrrnal, the system will, in
real-lime‘transmfl Signals to activate an alaim in wam
lhedriverol tire problem.
With the universal design, this system can be
programmed 4-22 tires according to different
1.sensor
Operating lrequency: 433.92MH1
Operating voltage: z.z-3.sv
Operating temperature: 4D"c~+1 25'c140'P—tzer
Humidity: o%~ioo%
Pressure range: o~i4 0 Bar
Temperature range: 40'C~+98‘C/40'F-208‘F
Pressure accuracy: 10 14 Ear
Temperature accuracy: 131:
Batter life: a years
Tire symbol Tire pressure Pressure unit
Adrust putteri
Sal outten
Temperature
Display W"
Buzzer
Display cattery
commercial vehicle 2. Display Alarm symbol Tire temperature Mica”
TPMS can help you to avoid tire accidents due to Operating frequency: 433.92MH1 A ‘ d
tire lailure,|o improve fuel efficiency and decrease Operating voltage: 9~27v "9 E a "51 Note;
the wear. ngn PS setting high tire pressure alarm value
Low PS: setting low tire pressure alarm value
arameter settings
Opemling temperature: 720>C~+70'C/4'F~+158'F
3.Alr pressure unit
1 Baf=14 5 Psi = 100K Pa =1.02 Kgllcm’
Key features
Factory settings:
Pressure unit: Bar
Temperature unit: 'c
. TPMS for commercial vehicles High Ps: 10 0 Bar
. Suimblsfor12~24v vehicles Mum, Low P5: 6 0 Bar
- Match wrth 4~22 tires
- Display installed on dashboard/Windshield or portable
High Tempemture: mic
. Display With rechargeable battery
. Selfrtesl function
. Real time monitoring tire pressure and temperature
Nole' if you change the pressure/temperature unit,
the default tire pressure/temperature values vvill be
changed automatically
Sett mode
(AI standby mode. press ”SET” button continuously tor 5 times or more, then enter setting mode with a long
beep. Press ‘4 . N button to choose the parameter:
s;
Prism". unit High Ps
temp-rat . unit Low Ps
Vs
be
high temp-retro.
"pressure unit'u>"pressure upper limll" ,> "lower limit of pressure‘ky'temperalure warning" a'hmperature
unit" ,> "pressure unit“
Press TA" button to adjust the parameters Press "SET" button for 3 seconds to save date and exit the
setting mode with the buzzer beep twice
Note: in setting mode, it there is no opemtion in 1 minute, the system Will exit automatically and return to normal
matte
Pressure Unlt setting
In “pressure unit" setting mode, the unit icon Will llash Press ‘7, A“ button to adjust You can choose the
unit at Psii Bar. Kgf/crrt‘ Press "SET" button to confirm and enter next program Press “SET" button lor 3
seconds to save and exit with the buzzer beep Mice
"kgtlcrn l‘lash i "Ber“ tlashi
in setting mode Press “ v, A ' to
adjust pressure unit
Press ‘SET " for 3
seconds to save end
exit setting mode
Pressure upper limit setting
in ' pressure upper limit " setting mode, the number will llash Press 1A” button to adjust. Press "SET"
button to confirm and enter next program Press "SET" button for 3 seconds to save and exit with the buzzer
beep twice The upper pressure limit can not lower than the lower pressure limit
Adjust range: 14 bar
Factory setting. 10 a bar
Flash Flash
Eiitwt
In setting rnode Press 7," to adjust Press “SET” tor a
the upper temperature seconds to save and
alarm exit the setting mode
Pressure lower limit setting
in "pressure lower limit" setting mode, the number will tlash. Press 7," button to adjust Press "SET"
button to confirm and enter next program. Press ”SET“ button tor 3 seconds to save and exit With the buzzer
beep twice The lower pressure limit can not higher than the upper pressure limit
Adjust range: 1 0 bar
Factory setting: a 0 bar
Flash i Flash 3
Press 1A" to adjust
pressure lower limit
Press “SET" for 3
seconds to save and
exit the setting mode
in setting mode
(Tomp-ramre warnlng
in "temperature wanting" setting mode, the alarm temperature number will flash Press "v, A" button to adjust.
Press "SET“ button to conlirrn and enter next program. Press "SET“ button lor 3 seconds to save and exit
with the buzzer beep twice
Adjust range: 50~90‘c
Factory setting. we
Flash Flash
Eflrfihr
in setting mode Press “V, A" to adjust
the upper temperature
alarm
Press "SET" for 3
sscunds to save and
exit the setting mode
Temperature untt
tn "temperature unit" setting mode, the unit icon will llash Press "1.x button to adjust Press "SET" button
to conitnn and enter next program. Press "SET“ button tor 3 seconds to save and exttwith the buzxer beep
twice
""“C flash “F“ ttash
fitmw
tn setting mode Press “7. A" to adjust
the temperature unrl
Press "SET" tor 3
seconds to save and
exit the setting mode
Press and hold the “4 " button tor 3 seconds to
choose the day/night rnode ol the display
in day mode:
The backtighl of the display will turn on constantly
in night mode:
t) Once the Act: turns on, the backtight will turn on.
After all (ties intormation have been showed circularly
one time, the backtight wilt tum otl (lithe quantity
of tire is less. the backtight will turn on at least 30
sscondsi
2) The backtighl will turn on conslsmfly whsn liters
rs alarm wamrng tor abnormal ttre
a). it the display battery is tow or there is lalse alarm,
the backlighl will turn on to seconds
4). Press any button of the display. the backtight wilt
tum on to seconds
D splay turn onloff
Remove the dtsptay trom the holder. press and hold
the "A" bunch for 5 seconds, the display will turn oil
atter one beep heard.
Press and hold the "A" buflon for 5 seconds. the
display will turn on again after one beep heard (Or
reconnect the display on the holder, it will also turn
on)
At charge mode (The display is connected to
theholder)
Press ‘4 N buttons to choose tall or rtght tires
Press “VA" buttons to choose lront or reartires
The rntormatron of ttre which you chose will be
showed on the display Press the “SET bunch once,
the display will stay on the current image and only
showed the inlormation ol the current tire. The car
respondtng lire icon ‘I" wtlt llash quickly. Press the
“SET“ button once again, it will return to normal tire
tnformation showed (ti there is atarrn warning for any
abnormal tires. this operation is invalid )
At pomblo mode
(The display is removed trom the holder)
Press ”4 b" buttons to choose telt or right tires
Press “VA‘ buttons to choose lrortl or rear tires
The corresponding tire icon ‘I" will llash slowly.
Note: in this mode. the display will not show the ttre
inlormstiorr circularly

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2012:05:02 14:18:45+08:00
Modify Date                     : 2012:05:02 14:18:45+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2012:05:02 14:18:45+08:00
Format                          : application/pdf
Document ID                     : uuid:3f8533d4-a4bb-4547-8c06-af8c39aac8a1
Instance ID                     : uuid:4ad17f0b-6f5c-4705-b0f3-1bd45cdb82e9
Page Count                      : 5

EXIF Metadata provided by EXIF.tools