STEINEL SIR13 Motion Detector User Manual SIR13 installation instructions2

Download:
Mirror Download [FCC.gov]
Document ID	1691109
Application ID	9B3UOJXLyF8hqZSiRIRJLw==
Document Description	Installation instructions
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.04kB (100534 bits)
Date Submitted	2012-05-07 00:00:00
Date Available	2012-05-07 00:00:00
Creation Date	2012-03-19 15:46:44
Producing Software	GPL Ghostscript 9.01
Document Lastmod	2012-03-19 15:46:44
Document Title	SIR13_installation_instructions2
Document Creator	FreePDF 4.04 - http://shbox.de
Document Author:	kwenners

Installation Instructions SIR13
1)
2)
3)
4)
Provide 5V DC on pad 1 (4.25V-5.75V)
Provide a low impedance RF and DC ground onto pad 3
Connect pad 2 (IF) to the µPC for signal processing
Operating temperature: 0-50°C
PAD3
PAD2
PAD1
NOTICE:
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry
Canada.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
NOTICE:
Changes or modifications made to the equipment not expressly approved by Steinel
GmbH may void the FCC / IC authorization to operate this equipment.
The use of the transceiver is authorized into mobile or fixed devices taking into
account the conditions listed below :
• OEM Integrator may be sure that the end user manual may not contain any
information about the way to install or remove the module from the final
product.
• Depends on final host configuration additional authorization requirements for
the non-transmitter functions on the transmitter module may be required (i.e.,
Verification, or Declaration of Conformity) OEM integrator is responsible for
ensuring that after the module is installed and operational into the host, it
continues to be compliant with the Part 15B unintentional radiator
requirements.
• The information on label and user manual is required to be incorporated in the
user manual of the final system. see 47 CFR15 requirements for more details
(e.g. 15.19 / 15.21 / 15.101 / 15.105 / RSS-GEN / ICES)
• Additional label with the words ‘Contains FCC ID:W8J-SIR13’ and ‘Contains
IC:8529A-SIR13’ shall be applied and visible from the outside of the end
product.
• The module must be installed and used in strict accordance with the
manufacturer’s instructions as described in the user documentation that
comes with the product.
• The antenna of the module may not be removed, replaced nor modified. The
antenna must not be co-located or operating in conjunction with any other
antenna or transmitter. No additional antenna must be used.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 2
Producer                        : GPL Ghostscript 9.01
Create Date                     : 2012:03:19 15:46:44+01:00
Modify Date                     : 2012:03:19 15:46:44+01:00
Title                           : SIR13_installation_instructions2
Creator                         : FreePDF 4.04 - http://shbox.de
Author                          : kwenners

EXIF Metadata provided by EXIF.tools