STEINEL SIR13D Homodyne radar User Manual The XO is a negative resistance CRO working on 5

Download:
Mirror Download [FCC.gov]
Document ID	3755158
Application ID	uchPQnOAAqHfVTzGpN/peA==
Document Description	installation instructions
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.07kB (38433 bits)
Date Submitted	2018-02-16 00:00:00
Date Available	2018-02-16 00:00:00
Creation Date	2017-06-12 07:45:34
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2017-06-12 07:45:35
Document Title	The XO is a negative resistance CRO working on 5
Document Creator	Acrobat PDFMaker 11 für Word
Document Author:	amoenninkhoff

Installation Instructions SIR13D
1)
2)
3)
4)
Provide 5V DC on pad 2 (4.25V-5.75V)
Provide a low impedance RF and DC ground onto pad 3
Connect pad 1 (IF) to the µPC for signal processing
Operating temperature: 0-50°C
PAD1
IF
PAD2
+5V
PAD3
Ground
NOTICE:
Changes or modifications made to this equipment not expressly approved by Steinel
may void the FCC authorization to operate this equipment.
This device complies with Part 15 of the FCC Rules [and with Industry Canada
license-exempt RSS standard(s)].
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
Changes or modifications made to the equipment not expressly approved by Steinel
GmbH may void the FCC / IC authorization to operate this equipment.
The use of the transceiver is authorized into mobile or fixed devices taking into
account the conditions listed below :
• OEM Integrator may be sure that the end user manual may not contain any
information about the way to install or remove the module from the final
product.
• Depends on final host configuration additional authorization requirements for
the non-transmitter functions on the transmitter module may be required (i.e.,
Verification, or Declaration of Conformity) OEM integrator is responsible for
ensuring that after the module is installed and operational into the host, it
continues to be compliant with the Part 15B unintentional radiator
requirements.
• The information on label and user manual is required to be incorporated in the
user manual of the final system. see 47 CFR15 requirements for more details
(e.g. 15.19 / 15.21 / 15.101 / 15.105 / RSS-GEN / ICES) Additional label with
the words ‘Contains FCC ID:W8J-SIR13D’ and ‘Contains IC:8529A-SIR13D’
shall be applied and visible from the outside of the end product.
• The module must be installed and used in strict accordance with the
manufacturer’s instructions as described in the user documentation that
comes with the product.
• The antenna of the module may not be removed, replaced nor modified. The
antenna must not be co-located or operating in conjunction with any other
antenna or transmitter. No additional antenna must be used.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : amoenninkhoff
Comments                        : 
Company                         : Hewlett-Packard Company
Create Date                     : 2017:06:12 07:45:34+02:00
Modify Date                     : 2017:06:12 07:45:35+02:00
Source Modified                 : D:20170608135636
Subject                         : 
Language                        : DE-DE
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2017:06:12 07:45:35+02:00
Creator Tool                    : Acrobat PDFMaker 11 für Word
Document ID                     : uuid:b8dbe1a9-3863-4be4-a55c-bcc172584a3e
Instance ID                     : uuid:9fdb3c41-0ab7-4249-b29c-21672db245c3
Format                          : application/pdf
Title                           : The XO is a negative resistance CRO working on 5
Description                     : 
Creator                         : amoenninkhoff
Producer                        : Adobe PDF Library 11.0
Keywords                        : 
Page Layout                     : OneColumn
Page Count                      : 2

EXIF Metadata provided by EXIF.tools