SUNGI TECHNOLOGY T2K Wireless keyboard User Manual Si Touch

SHENZHEN SUNGI TECHNOLOGY CO.,LTD Wireless keyboard Si Touch

User Manual

Download: SUNGI TECHNOLOGY T2K Wireless keyboard User Manual Si Touch
Mirror Download [FCC.gov]SUNGI TECHNOLOGY T2K Wireless keyboard User Manual Si Touch
Document ID2752618
Application IDJtGJAVODb09wDmNJ9G2l8w==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize69.92kB (874025 bits)
Date Submitted2015-09-17 00:00:00
Date Available2015-09-18 00:00:00
Creation Date2011-12-13 13:24:14
Producing SoftwarePDFlib 7.0.3 (C++/Win32)
Document Lastmod2015-09-01 17:39:13
Document TitleSi Touch User Manual
Document CreatorWPS Office 个人版
Document Author: Versa

Wireless Keyboard
T2
User
User’’s Manual
08
RF
Ver:
Ver:08
08RF
RF//2.
2.2
Safety Precautions
Safety Matters
To avoid injury,death of personnel or
damage to the equipment the
operator must refer to the explanations
in this User’s Manual.
Battery: There is a lithium-ion rechargeable
battery in this device.Don’t water this
device,or put it in a humid environment for
a long time or the device will be damaged.
Attention to traffic safety
(CAR PC): Do not use the device
while driving.When you want to use
it,please park your car.
Turn off this device on planes
This Electronic wireless product can
disturb the communications
systems of planes.Please turn if off
before boarding.
In vicinity of dangerous goods to
be shut down
In gas station and close to fuel and
chemical agents and other
hazardous materials areas,please
turn the device off.
Turn off this device in hospital
Please turn the device off in
areas with “no wireless
device”indication.
Wireless devices may interfere with
implanted cardiac pacemakers,hearing
aids and other. Medical implant
devices.
Interference
All wireless devices may be subject to
interference, thus affecting the
performance of this product.
Accissories
Only use factory specified parts.Please
use the supplied travel charging
cable.the use of other charging devices
may be dangerous.
Overview
This is a wonderful combo,2.4GHz Mini
Wireless QWERTY keyboard ,TouchPad
combo,with USB interface Adapter
For the lectuer, sales manager, presenter,
from within a 30' radius make a presentation and
operate PC wirelessly. Change slides and screen
options, write on the screen, emphasize words
and objects just by using this wireless Mini
Keyboard and Mouse with Touch Pad.
For people who want to watch internet TV
play on their standard TV, via broadband and a PC,
like NBC,ABC,FOX and IPTV,Android TV Box, if
use this wireless mini combo, who can sit in
comfortable chair and select viewing pleasures
without walking to computer to change channels
or scroll through options.
Introduction
Product overview
Touchpad
This product was added to the innovative function
Of the mouse wheel,when you press the Fn button
With your fingers Touch anywhere in the sliding
regionk,can facilitate the realization of the mouse
wheel functions.This human design,it can be easier
for to browse the web better,edit documents.
Connecting the receiver
Slide the receiver out from the side of keyboard,
and insert to the devices with a standard USB
interface. Once connected, slide the power switch
to the "ON" position located on the left side of the
unit to establish the connection.
Auto sleep and wake feature
The keyboard also features an auto sleep and auto
wake mode. If there is a long period of inactivity, the
keyboard will automatically go into a sleep mode.
During the sleep mode, the user can wake the unit
up by pressing any key. The 2.4 GHz receiver and
keyboard’s RF indicator will continue to flash and
will not power down.
Switching off the keyboard after use
After finishing using the keyboard,push the switch
to the off position.This turns off the power,of the
keyboard.The USB receiver should be plugged out
from the PC and then inserted back in the keyboard
so it is being kept safely.
Charging the battery(Only for Configure A)
The device with built-in lithium-ion battery, please
use only approved data lines and chargers.
Fully charge the unit before operating for the
first time. This device can be used when charging,
but will extend the charging time;
When the battery is low, the low-voltage light will
flash to warn the user. The unit will automatically
turn off if the battery has been depleted.
Notes: This product has the configuration of A and
B configuration can choose
Configure A:lithium battery version, this version
built in rechargeable lithium battery, additional
charge USB line.
Configur
e B:Install AAA * 2 battery, this version
Configure
does not support the charging function.
Appendix
Technical parameters
Specification
� Measurements (L x W x H): 146.8 x 97.5 x
19mm
� Weight (grams): 110g
� Operational Range: up to 10 meters
� Transmit power : +5db Max.
� Operation voltage: 3.3V
� Operation current: < 50mA
� Charging current: < 300mA
� Sleep current:
< 1mA
Computer system requirements
� Windows 2000
� Windows XP
� Windows Vista ,Windows CE, Windows 7
� Linux(Debian-3.1,Redhat-9.0 Ubuntu-8.10
Fedora-7.0 tested)
Maintenance
� Do not attempt to disassemble the device
or replace rechargeable battery. Doing so
will void the warranty.
� The battery will discharge if stored for a
long period of time without usage.
� Use the specified charger. Disconnect the
device after the battery has been fully
charged. Overcharging the battery will
shorten the life span of the battery.
� Do not expose the device in extreme heat
or cold. Extreme temperatures will cause
the life span of the battery to shorten.
� Use only a damp cloth with mild soap to
clean the device. Solvents and other
cleaning agents may cause damage to the
device.
Troubleshooting
Below are some basic troubleshooting scenarios
for the device. Please contact support from the
place of purchase if you are unable to resolve any
issues with the device.
Problem
Unit does
not respond.
Keyboard
cannot
establish a
connection to
the receiver.
The mouse
pointer moves
erratically
and/or
unresponsive.
The unit does
not charge
(only for
Configure A)
Possible issue
Solution
1、Low battery
power.
2、Unit is not
turned on.
1. Configure A:Charge the
device for at least 15 minutes.
Configure B:Replacement of
the AAA * 2 battery
2. Check if the switch
selected to the “ON” position.
1、The receiver
may not be
inserted
correctly.
1、Device may
not be within
optimal range
of the receiver
2、Low
voltage
3、Dust or oil
on the
touchpad.
1、Defective
battery.
2、Check
connections.
1、Disconnect and reconnect
the receiver to the USB port.
1、Bring the unit closer to the
receiver.
2、Please recharge(for
Configure A) or replace the
battery(for Configure B)
3、Clean the touchpad with a
damp cloth.
1、Contact your local dealer for
replacements.
2、Verify if the device is
securely connected to the
charger.
Notes:
In line with the policy of continued development
The manufacturer reserves the right to amend the
specifications without prior notification,The pictures
and date in the stylebook are consult only,If there is
fluctuation,According to the real object please.
Since devices using 2.4G technology communicate
using radio waves,your device and the other
devices do not need to be in direct line-of-sight.
The connection can be subject to interference from
obstructions, such as walls,or other electronic
devices
FCC Information and Copyright
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : Versa
Description                     : Si Touch Keypad
Title                           : Si Touch User Manual
Create Date                     : 2011:12:13 13:24:14+08:00
Creator Tool                    : WPS Office 个人版
Modify Date                     : 2015:09:01 17:39:13+08:00
Metadata Date                   : 2015:09:01 17:39:13+08:00
Producer                        : PDFlib 7.0.3 (C++/Win32)
Document ID                     : uuid:ac001a85-f85c-4591-af00-ac448734b3d4
Instance ID                     : uuid:56895aca-839b-49f3-b8fc-659b0b2fd14f
Page Mode                       : UseOutlines
Page Count                      : 11
Author                          : Versa
Subject                         : Si Touch Keypad
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2ABDB-T2K

Navigation menu