SUNVALLEYTEK BH09B Bluetooth Earphone User Manual
SUNVALLEYTEK INTERNATIONAL, INC. Bluetooth Earphone
User Manual
![](/img.php?id=3402509&img=bg1.png)
Bluetooth Earphone
Model: VA-BH009
Thank you for choosing the VAVA Bluetooth Earphone. If in doubt, please contact
our customer support team by email at support@vava.com.
Package Content
1×Bluetooth Earphone
6×Ear Buds (two are equipped on the headphones)
6×Ear Hooks (two are equipped on the headphones)
1×Travel Pouch
1×User Guide
Product Diagram
1. Volume+/Next
2. Multifunction Button
3. LED Indicator
4. Volume-/Previous
5. Microphone
6. Micro USB Charging Port
How to Use
1. Charging
1)Connect the charging port with any USB charging adapter or active computer USB
port.
2)Charging will start automatically with LED indicator turning red
3)The headphones is fully charged when LED indicator turns blue
Note: Charge the headphones at least once every 6 months when not using for a long
time.
![](/img.php?id=3402509&img=bg2.png)
2. Pairing
1) Make sure the headphones and your Bluetooth® device are next to each other
(within 3 feet);
2) The first time you use the headphones, press and hold the Multifunction Button
until the LED indicator flashes red and blue alternately. Now the headphones is in
pairing mode;
3) Activate Bluetooth® function on your phone and search for the nearby
Bluetooth® connection,Tap on the name to connect. Once connected, only the
blue LED will remain on.
Note:
The Bluetooth® headphones can remember previous paired devices.
If the headphones cannot pair with your Bluetooth device, please press and hold
the Volume +/-Button at the same time until the LED Indicator flashes purple
twice when power on.
How to Wear
Please wear the headphones as shown in the diagram:
1) Attach the ear hooks onto the earphones;
2) Wear the earphones and the hooks on your ears and adjust for the best fit.
![](/img.php?id=3402509&img=bg3.png)
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radiofrequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment. This device
complies with Part15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and(2) this device must accept any
interference received, including interference that may cause undesired operation.