SUNVALLEYTEK TT-BH062 Sound Bar User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4102746
Application ID	lwk3oovnyaECxZwxXaLHBw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	126.23kB (1577913 bits)
Date Submitted	2018-12-11 00:00:00
Date Available	2018-12-11 00:00:00
Creation Date	2018-12-10 16:05:52
Producing Software	PDFium
Document Lastmod	2018-12-11 16:59:16
Document Title	User Manual
Document Creator	PDFium

Please keep and read this manual carefully before use.
1. Use the earphone in safety situation.
2. Use reasonable volume, long time loud volume may cause hearing damage.
3. Avoid water infiltration.
4. Do not use while charging.
5. Do not try to remove the built-in battery.
6. Place the earphone out of reach of children.
Frequently Questions
1.Keys on functions: contact TT-BH062 after-sale-service for help.
2. Can’t power on: remove the USB charging.
Charging
Plug the Micro USB cable to the USB jack on the volume controller, then connect
the USB to the adaptor or PC. The red LED flashes slowly while charging. When
the charging is finish, blue LED is light on.
Packaging list
1 set
1pc
2pcs
charging box:
user manual:
large earcap:
1pc
1pc
2pcs
Funtion Indication
MIC
LED
Bluetooth Earphone
1. Power On: open the charging box, the earphone will power on automatically. You
can also press the touching key more than 5 seconds till blue light is on, you can also
hear ‘power on’ voice prompt.
2. Power Off: put the earphone into the charging box and close the box. You can also
press the touching key more than 5 seconds till red LED light on, you can also hear
‘power off’ voice prompt.
Pick Up A Phone Call
Pairing
1. For first time use, open the charging box, hold for 3 seconds, left earphone and
right earphone will connect to each other automatically. After left and right earphone is
connected, TT-BH062 earphone is ready to paring. The red and blue LED on the right
earphone is alternate flashing.
2. Find ‘TWS-813A’ in your bluetooth device and connect it.
1.If you have connected TT-BH062 to a bluetooth device before, TT-BH062 will try
to connect to the last connected device automatically while it is power on.
2. If the last connected device is not in the paring range, TWS-813A will change to paring
mode for another device after 10 seconds. You can connect it with new bluetooth
device.
3. There will be ‘Du Du’ sound remind and blue LED flashes 2 times every 10 seconds
if the earphone is out of the connect range. The earphone will connect automatically
within 10 minutes if they are in connect range.
4. TWS-813A will power off automatically after 5 minutes if there is not any device connected.
5. If you disconnect the earphone artificially, the earphone will turn to pairing mode
and you can connect with another new device.
Charging LED
Micro USB Charger
Earphone
Charging LED
Reject A Phone Call
Specifications
Bluetooth: V5.0
speaker diameter: Ø5.5mm
earphone sensitivity: 96±3dB
work time: approx 3 hours
Press the left or right touching key for 2 seconds when a call is incoming.
Charging Box
Hang Up A Phone Call
Mute
Press the left or right touching key for 3 seconds during a calling for mute and un-mute.
Last Number Redial
1. Take out the right earphone from the charging box, leave the left earphone in
the charging box and close the charging box, after 5 seconds, the right earphone is
ready for pairing. Find ‘TT-BH062’ in your bluetooth device and connect it.
2. If the left and right earphone are power off, just power on the right earphone,
after 5 seconds, the right earphone is ready for pairing. Find ‘TT-BH062’ in your
bluetooth device and connect it.
work Distance: 10 meters
speaker impedance: 16±10% Ω
microphone sensitivity: -38±3dB
net weight: approx 12g
3 click left or right touching key under un-playing mode.
Voice Dial
Press the left or right touching key more than 3 seconds. Device support is required
for this function.
Play and Pause
Volume Up and Volume Down
During playing, click the right touching key for volume up, click the left touching key
for volume down.
Previous or Next Song
During playing, 3 click the left touching key for previous song, click the right touching
key for next song.
Red and green LED flicker every 4 seconds during
charging. Green LED is on while charging is finished
Earphone
Red LED is on while charging, green LED is on for 10
seconds while charging is finished
Battery
In un-charging situation, red LED flicker every 5
seconds and last 10 seconds. Red LED flicker 4 times,
100% battery. Flicker 3 times, 80% battery. Flicker 2
times, 60% battery. Flicker 1 time, 40% battery. Flicker
fast, 20% battery and it needs to be charged
Power On
Power Off
Pairing Status
Without Connect
Connected
Red LED flicker one time and there is no LED light
Red and blue LED is alternate flashing
Blue LED flicker every 5 seconds.
Blue LED flicker slowly every 4 seconds.
Blue LED flicker fast every 5 seconds.
Incoming Call
Right blue LED flicker fast every 1 second and left blue
LED flicker fast every 5 seconds.
Having a Call
Right blue LED flicker slowly every 3 second and left
blue LED flicker fast every 5 seconds.
Toble of Toxic and Hazardous Substances/Elements and their Content
Toxic and Hazardous Substances /Elements
Component
name
Pb
Hg
Cd
Cr(VI）
PBB
PBDE
Metal parts
×
○
○
○
○
○
Plastic
accessories
○
○
○
○
○
○
Plastic parts
○
○
○
○
○
○
Cable
○
○
○
○
○
○
PCBA
○
○
○
○
○
○
○：The content of the toxic substance in the component is below the limit specified
in the SJ/T11363-2006 standard.
×：The content of toxic and harmful substances in at least one of the homogeneous
materials beyond the SJ/T11363-2006 standard.
(This product meets ROHS environmental protection requirements: At present, there
is no mature technology in the world to replace or reduce lead content in electronic
ceramics, optical glass, steel and copper alloys)
Description: the components in the table cover our headphones, the different parts of
the product design are not exactly the same, please make the object as the standard.
Note: EFUP depends on the product normal working temperature and humidity
conditions.
Contact number
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.
Date of purchase
S/N
During a call or playing, ‘battery low’ voice remind
every 1 minutes, earphone will power off automatically
after 3 times. If the earphones are in display situation,
red light flicker very 5 seconds, earphone will
automatically power off after 2 minutes.
Red LED is always on.
10
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions (1)this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Environmentally Friendly Use Period:
According to People's Republic of China's “electronic information products pollution
control management method”, the electronic information products sold in People's
Republic of China must be marked with this sign,the number in the sign indicates the
product’s environmental protection life is in normal using state.
User name
Blue LED flicker slowly every 5 seconds.
Calling
Charging
Do not use this headset in an unsafely environment, such as operating
machinery, crossing the street or engaging in work with uncertainties.
Do not use this headset while driving. Using headphones while driving is
suspected of violating the law. It reduces your hearing sensitivity and may
cause dangerous of yourself or others.
Using loud volume for a long time can damage hearing. Please adjust the
volume of the player before using it, then adjust the volume according to
actual needs. Long time hearing more than 85dB sounds can cause hearing
loss.
Please use this headset and store accessories between 5℃~35℃.
Do not disassemble this headset privately, any privately disassemble will
cause no after-sales service from koppo.
Blue LED flicker every 5 seconds after greed LED
flicker one time
Playing
Low Battery
Charging Finished
Blue LED is on for 10 seconds then it is off.
The left and right
headphones
Left and Right Pairing
Blue flicker fast.
show
consistency
Left and Right Connected Blue LED flicker every 5 seconds.
Security information
LED Indication
Double click the left or right touching key for play or pause during playing.
Right Earphone:
FCC ID: 2AFDGTT-BH062
Double click the left or right touching key when a call is incoming.
Battery Low’ sound will remind you that battery is low. After sound remind, Red LED
will flicker every 5 seconds. 2 minutes later, the earphone will power off automatically.
Please charge the battery accordingly.
Double click the left or right touching key during a calling.
Pairing Note
Use As A Single Earphone
User's Manual
Low Battery Alarm
1.Take out the left earphone from the charging box, leave the right earphone in the
charging box and close the charging box, after 5 seconds, the right earphone is
ready to pairing. Find ‘TT-BH062-L’ in your bluetooth device and connect it.
2. If the left and right earphone are power off, just power on the left earphone, after
5 seconds, the left earphone is ready for pairing. Find ‘TT-BH062-L’ in your
bluetooth device and connect it.
The left and right headphones show consistency
TT-BH062
Bluetooth earphone:
USB charging cable:
small earcap:
Left Earphone:
Power On and Power Off
Warning
11
12
Due to the reasons in the change of design or others, product information
contained here may not be conformity with product itself. We reserve the
right of no prior notice before change.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Create Date                     : 2018:12:10 16:05:52
Creator Tool                    : PDFium
Modify Date                     : 2018:12:11 16:59:16+08:00
Metadata Date                   : 2018:12:11 16:59:16+08:00
Producer                        : PDFium
Format                          : application/pdf
Document ID                     : uuid:4e7da53b-653b-494b-b1c2-ed1f4b334781
Instance ID                     : uuid:a4253c4f-a89a-4821-af45-39c3f345535a
Page Count                      : 1
Creator                         : Adobe Illustrator(R) 16.0
AI Creator Version              : 16.0.0
For                             : Administrator,
Title                           : TWS-813A说明书18-10-22.pdf
Bounding Box                    : 56 79 1758 748
AI Build Number                 : 682
AI Color Usage                  : Color
AI Ruler Units                  : Millimeters
AI Color Model                  : CMYK
AI Target Resolution            : 800
AI Num Layers                   : 1
Container Version               : 11
Creator Version                 : 16
Image Height                    : 669
Image Width                     : 1702
Image Size                      : 1702x669
Megapixels                      : 1.1

EXIF Metadata provided by EXIF.tools