SUNVALLEYTEK TT-BR01A Bluetooth Receiver User Manual

SUNVALLEYTEK INTERNATIONAL, INC. Bluetooth Receiver

user manual

TaoTronics Wireless Receiver Model: TT-BR08 Thank you for choosing the TaoTronics TT-BR08 Wireless Receiver. If in doubt, please contact our customer support team by email at support@taotronics.com. Package Content 1×TaoTronics TT-BR08 Wireless Receiver 1×USB Charging Cable 1×3.5mm Audio Cable 1×3.5mm Audio Receiver 1×User Guide Product Diagram 1. 3.5mm Audio Output Port 2. Volume + 3. Previous track 4. Volume - 5. Micro USB Charging Port 6. Next Track 7. Power Button/LED Indicator 8. Microphone 9. Active Voice Control 1 2 3 5 6 7 4 8 9
How to Use 1. Charging 1) Connect the charging port with any USB charging adapter or active computer USB port. 2) Charging will start automatically with LED indicator turning green. 3) The receiver is fully charged when LED indicator turns off. Note:  Make sure the battery is fully charged before putting the headphones away for storage.  Charge the receiver at least once every 6 months when not using for a long time. 2. Pairing 1) Make sure the receiver and your Bluetooth® device are next to each other (within 3 feet); 2) The first time you use the receiver, press and hold the Multifunction Button until the LED indicator flashes red and blue alternately. Now the receiver is in pairing mode; 3) Activate Bluetooth® function on your phone and search for the nearby Bluetooth® connection: Find “TaoTronics TT-BR08” in the search results. Tap on the name to connect. Once connected, only the blue LED will flash. Note：The Bluetooth® receiver can remember previous paired devices. Button Control Function Operation Power on/off Press and hold the Power Button until the LED Indicator flashes/off. Play/Pause/Answer/Hang up phone call Press the Power Button once Reject phone call Press and hold the Power Button for 2 seconds. Redial Press the Power Button twice. Volume +/- Press the Volume +/- Button Previous/Next Track Press the Previous Track/Next Track Button Active Voice Control Press the Active Voice Control Button once \
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu