SUNVALLEYTEK TTBH02 Bluetooh Headset User Manual UserManual

Download:
Mirror Download [FCC.gov]
Document ID	2691577
Application ID	a9z6iIG1LcAL3Y173iCMmg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	171.71kB (2146325 bits)
Date Submitted	2015-07-24 00:00:00
Date Available	2015-07-24 00:00:00
Creation Date	2014-08-08 17:01:16
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2015-07-24 11:42:59
Document Title	Microsoft Word - UserManual
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

l. Notice Before Using
2. Package Contents List
3. Product Introduction
4. Charging the Headset
5. Power On/Off
6. Pairing the Headset with a Bluetooth Device
7. Wearing the Headset
8. Answering Calls
. Refusing Calls
. Ending Calls
.Voicc Dialing
. Redialing
. Mute
. Transferring Calls
. Adjusting the Volume
. Safety Instructions
. Specifications
. Diagnosing Problems
. Headset Storage
Travel Charger
BATTERY
1. Notice Before Using
Thank you for purchasing the Bluetooth Headset BTH—068.
Please check the contents ofthis package to verify the items
listed in the Package Contents List below to has been included
in your package. Be sure and read this User Guide before you
use the Headset. The BTH-068 has been developed using
Bluetooth wireless technology and is capable ofconnecting
with Bluetooth devices designed with Audio Gateway and
PDAs. Desktop and notebook computers can be connected
and paired with the Headset using a USB Bluetooth Dongle.
Before using the Headset please verify your Bluetooth device
(phone, PDA) complies with Bluetooth V2.1 and supports the
Bluetooth Headset or Handsfree profile.
2. Specifications
Product Model N0.
'IT- BH 02
Standard Convention/Signal Output Bluetooth V2.1, Class [I
Frequency Band
Talk/ Stand by Time
Supporting Profile
Connection
Data Encryption
Power Capacity
Power Supply
Operation Temperature
Facility Saving Temperature
Operation Moisture
Weight
Size
Safety Regulation
2.4GH2~2.483SGH2,ISM Band
Up to 8 hours/ Up to 200 hours
Headset & Handsfree
Peer to Peer
128 bits encrypted
Rechargeable Li-Polymer
5V DC, 100~240V AC adapter
- l 0 ~ 55C
-20 ~ 60C
l0% ~ 90%(non-concretc status)
4 1 3 (battery included)
l50‘l40‘47 mm
CE, FCC, BQB
3. Product Introduction
Functions (Answering / Ending / On / Off) Button #3
LED Indicator Light
Receiver/ Speaker
Microphone
Power Interface /Adapter for Charging the Unit
Decrease Volume Key (-) 1
Increase volume key (+) 2
NOTE:
Before using the Headset for the first time , be sure and fully
charge the unit at least 4 hours, preferably overnight (8-10
hours)‘
4. Charging the Headset
The BTH-068 comes with a built in Lithium Polymer battery.
To charge the unit:
a.Plug the travel charger into an electrical outlet.
b.PIug the unit end ofthc Travel Charger into the Power
Interface Adapter on the Headset.
c.WhiIe charging, the LED Indicator Light will turn red.
When charging is complete, the red Indicator light will
shut offor flash red to alert you that the unit is fully
charged and ready to use.
NOTE:
' For first time use ,make sure to fully charge the Headset at
least 4 HOURS, preferably overnight (8-10 hours).
- IfHeadset has not been used for more than 21 days, when
recharging it please charge unit at least 4 hours, preferably
overnight (8-10 hours) as the battery will need a full charge
and be aware the LED Indicator Light may take several hours
to show recharging is complete.
° While charging the unit, please do not use the Headset.
' Please use the original charger included with the Headset
to charge/recharge the unit.
° When the LED Indicator Light flashes red during usage or
while on standby, the battery is low and you should recharge
the unit as soon as possible.
' Please recharge the Headset in room temperatures ofno
less than +14~ F(-lO'C) to + ”3' F(+45'C).
5. Power On / Off
a. To TURN THE UNIT ON , PRESS AND HOLD THE
Function button for 5 seconds. The power will turn on
after the LED Indicator Light flashes the blue light 3
times.
b. To turn the unit off, press and hold the Function button
for 5 SECONDS UNTIL THE RED Indicator Light
flashes 3times.
NOTE:
° While turning the Headset on, you will hear a “Du Du"
sound from the receivers The blue Indicator Light will flash
5 times, then 2 times, and after repeating this for 5 cycles, the
Indicator Light will flash the blue light every 3 seconds until
the unit adjusts into Standby mode.
- While the Headset is turned on, it will automatically search
for the paired device. Under the “ON” mode and within the
effective range of30 feet from the Headset, the Indicator will
flash the blue light to indicate that it entered the connecting
mode.
' When turning the headset off, you will hear one “Bi"
sound followed by two “Du" sounds, then the Indicator
will shut offafter flashing the red light a few times.
6.Usage: Paring
Firs ofall, please make sure your phones are Bluetooth enabled
and them pair them with the Bluetooth headset following
indications ofthe phones .whcn pairing, please place the phone
and headset together (the distance should be less than lmeter)to
guarantee pairing smoothly.
Paring With 1 Phone
a.Turn on both the headset and the phone:
b.Hold the headsct‘s MFB for 8 seconds till its blue and red
indicator lights flash altenately, which means the headset
enter into pairing mode:
c.Activate Bluetooth function ofthe cell-phone to get into its
searching mode and search for Bluetooth devices (please
refer to the phone's manual for more instruction)
d.Select “BTH-OGS " among the phone's searched devices
list , and then confirm according to its indications.
c.1nput pin code “0000" to confirm and finish pairing.
when the headset's blue indicator light flashes, it means
the headset and mobile phone has completed pairing and
connected.
Paring With 2 Phones
Bluetooth headset BTH-068 is with dual-link function for
connection to two mobile phones simultaneously
a.Plcasc pair the first phone following above “pairing with
one phone" steps.
b.Turn offthe first connected phone‘s Bluetooth function
temporarily.
c.After finished pairing with the second phone, turn offthe
headset ,And then power on the first paired phone's
Bluetooth function and Then restart the headset ,then, the
headset will connect to both the two paired phones
automatically
NOTE:
When the headset has connected with two mobile phones,
ifit is used to make calls with any one ofthem, the headset
will disconnect with the other one automatically temporarily,
and reconnect after calls end.
The headset‘s dual-link function may be not compatible
with certain brand or model ofphones.
7. Wearing the Headset
According to your preference, adjust the headset on your
left or right ear.
8.Answering Calls
a. When a call is received, wait until you hear the ringing
from your Headset receiver to press the Function button
to answer the call.
.lfthe mobile device is ringing first, wait until the Headset
is ringing, then press the Function button.
. While answering calls, the blue Indicator light flashes 4
tims each second.
.Ifthe mobile device is ringing and your Headset is off,
turn the Headset on first, then press the Function button to
answer the call.
. lfyour mobile device has “automatic answer ” feature
and it already set up to answer using this function, while
the call is coming in, your Headset can receive the call
automatically without pressing the Function button.
NOTE:
- For some mobile phones, the ringing sound ofthe Headset
may be the same as the ringing sound ofthe phone i.e. Nokia.
- For some mobile phones, the ringing sound ofthe Headset
is different than the phone i.e. Motorola.
9. Refusing Calls
To refuse a call, wait to hear from our receiver, then press
and hold the Function button 2-3 seconds until you hear the
“Du" sound to refuse the call. Ifyou have the mobile device
set to automatically answer calls, refusing call as described
here will not apply.
10. Ending Calls
3. When the call is complete, press the Function button to
end the call.
b. You can also wait until your caller hangs up and the call
will be disconnected automatically.
ll. Voice Dialing
a. lfyour mobile phone supports Voice Dialing, you can use
this Function with your Headset also.
b. Under the standby or connecting mode, press the Function
button on the Headset and follow the mobile devices'
manufacturer's instructions to proceed with Voice Dialing.
NOTE:
- The activation ofVoice Dialing will depend on the design
ofyour mobile device.
- The working range ofthe Bluetooth Headset is
approximately 15 fet indoors and 15 -30 feet outdoors.
12. Redialing
a. lfyour mobile device supports the Redialing feature, you
can also use this function with your Headset.
b. Under the Standby or Connecting mode, Press MFB twice
to redial the last call.
13. Mute
a.During the calling,Press and hold decrease
Volume key(-) for 2-3 seconds till you hear “
DU Du” tone to begin the muto tun function.
b.While this unit is in mute mode,you will hear two
long tone DU Per 4 seconds
c.To cancel the mute mode,Long Press Decrease Key(-) for
2~3 seconds till two short tone “Du Du” sound.
14. Transferring Calls
3. Transfer 3 call from the headset to the mobile device.
While a call is in progress, press the Increase Volume
Key (+) for 2-3 seconds until you hear one “Du” sound.
b. Transfer a call from the mobile device to the headset.
While a call is in progress, press the Increase Volume
Key(+)for 2-3 seconds until you hear one “Du” sound.
Note that some phones may require a 2-3 seconds press of
the Function button instead ofthc Increase Volume Kcy
(+) to perform this function.
NOTE:
To activate this function, your mobile device must support
the Handsfree mode. For more details, please check your
mobile device's manufacturer's instructions for additional
information.
15.Adjusting the Volume
During a call, you may adjust the Headsct's volume.
a.To increase the volume, press the Increase Volume Key (+).
b.To decrease the volume, press the Decrease Volume Key (-).
NOTE:
You will hear the “ Du Du ” sound while adjusting the
volume to the highest and lowest settings.
16. Safety Instructions
3. Read this Headset manual carefully and use the Headset
correctly at all times by following the instructions.
b. THIS IS NOT ATOY. Keep the Headset away from
children and avoid children chewing on the Headset or
it's components or accidentally swallowing any pieces.
c. To clean the Headset, wipe it with a soft, dry static-free
cleaning cloth.
d. NEVER use cleaning liquids, solvents, or sprays to
clean the Headset.
e. Do not clean the Headset while charging.
t’. Do not dissemble the Headset. lfyou encounter any
problems, contact the retailer immediately.
UEGENT HANDLING
' lfyou encounter a problem, turn the Headset offimmcdiately.
- lfthe inside component(s) break, please contact the retailer
for a repair center and instructions for immediate service
and support.
hi Mei/ma?
17. Package Contents List
Please inspect this package and refer to the package contents
list below to verify all items were included in this package.
Item Name Quantity
BTH- 068 Bluetooth Headset
User Guide -
Travel Charger
INPUT. AC 100- 240V, 50/60Hz
OUTPUT: DCS 1V I20Ma
Ifyou find any items were not included please contact your
retailer where you purchased this product.
18. Diagnosing Problems
3. Ifthe Headset LED Indicator Light is flashing red-the
battery is low and recharge the unit immediately.
b. If, after recharging for 20 minutes, the Headset does not
turn on: For initial use, the power will be on after charging
the Headset at least 40 minutes. The manufacturer's
recommended initial charging time is no less than 4 hours,
preferably overnight (8—10hours).
i Ifthc Headset dost not show the recharging sign: The
battery is completed depleted or the Headset has not been
used for 21 days, when charging the red Indicator Light
will be lit after a few minutes.
d. You hear no sound coming from the Headset.
*Make sure the Headset IS turned on.
*Make sure the headset has been paired with a Bluetooth
enabled device.
*Make sure the distance between the Headset AND THE
PAIRED Bluetooth device is no more than 30 feet.
* some Bluetooth mobile phones support only one Headset.
In this case, ifyou pairthe Bth-068 Headset with the device.
the other Bluetooth Headsets may be deactivated. Likewise,
ifyou pair other Bluetooth headsets with this type ofmobile
device, the BTH-068 Headset may become deactivated.
l9. Headset Storage
> Use ofaccessories other than the manufacturer's originally
supplied accessories may cause the Headset to malfunction or
fail. In addition, product damage, electrical conflicts with
non—manufacturer chargers may occur resulting in the
cancellation ofthe product warranty.
> Do not disassemble the headset for any reason. This may
damage the Headset accidentally and void the manufacturer's
warranty.
> Please store the Headset away from dust, heat and areas
where it might accidentally fall or other damage may occur.
> Use a clean, soft static-free cloth to clean the Headset‘s
surfaces.
> You can put the Headset in a pocket while not in use.
> Do not let children play with the Headset as it may cause
damage to the unit and avoid any danger to young children.
> Avoid storing the Headset and chargers in extreme
temperatures.
20.Travel Charger
1.The Travel Charger is designed for indoor use and not to be
used outdoors.
2.Connlect the Travel Charger with the appropriate power
su .
3.Dopri)ollunplug the Travel Charger from the electrical outlet
by the cord. Use the wall plug to pull the charger from the
electrical outlet.
13
21.3ATTERY
1.New battery: For first time use, charge the battery at least
4 hours, preferably overnight (8-10 hours).
2.0nly manufacturer authorized personnel can perform
battery replacement.
3.Under normal usage, the built in battery should be viable
for up to 24 months or longer depending on usage.
4.The battery must be recharged in room temperatures ofno
less than +14' F(-10'C) to + 113' F (+45'C) to remain under
warranty and to maximize the life ofthc battery.
5.Using the Headset in normal room temperatures enables
the battery to maximize its life.
6.When used in colder weather, the Headsct's battery life
may decrease.
7.Recharge the Headset at least every two months whether it
is used or not,
FCC WARNING
This devtte complies \n'th Part 15 of the FCC Rules. Operation is SUbJL'CI to the following two
conditions:
( 1) This device may not cause harmful interference. and
(2) this device must accrpl any interference received including interference that may muse
undesued operation
NOTE 1' Any changes or modifications to this unit not expressly approved by the parry
responsible for (aliphatic: could void ilie users authority to operate the eqtiipitietil.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2015:07:24 11:42:59+08:00
Create Date                     : 2014:08:08 17:01:16+08:00
Metadata Date                   : 2015:07:24 11:42:59+08:00
Format                          : application/pdf
Title                           : Microsoft Word - UserManual
Creator                         : Administrator
Document ID                     : uuid:f7566ddc-29e5-4f68-a25f-6ba73e78d3de
Instance ID                     : uuid:63f58865-9ff5-4def-aa2d-13e3edb3b95d
Has XFA                         : No
Page Count                      : 14
Author                          : Administrator

EXIF Metadata provided by EXIF.tools