SUPERSONIC GATE AND DOOR AUTOMATION 971LM Remote control User Manual GDO Accessories

Download:
Mirror Download [FCC.gov]
Document ID	3979444
Application ID	drveZwNe5ubKoishOwU0/Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20kB (249981 bits)
Date Submitted	2018-08-27 00:00:00
Date Available	2018-08-27 00:00:00
Creation Date	2002-06-20 15:02:36
Producing Software	Acrobat PDFWriter 2.0 for Windows
Document Lastmod	2018-08-24 11:35:33
Document Title	GDO Accessories
Document Creator	Microsoft Word
Document Author:	Chamberlain Group, Inc.

Model 971LM 390MHz Security ✚ Single Button Remote Control
OWNER’S MANUAL
The 900 Series remote control works only with door openers
and light controls having an orange “learn” button. The code
between the remote control and the receiver changes with each
use, randomly accessing over 100 billion new codes.
WARNING
To prevent possible SERIOUS INJURY or DEATH from a moving
gate or garage door:
• ALWAYS keep remote controls out of reach of children. NEVER
permit children to operate, or play with remote control
transmitters.
• Activate gate or door ONLY when it can be seen clearly, is properly
adjusted, and there are no obstructions to door travel.
• ALWAYS keep gate or garage door in sight until completely closed.
NEVER permit anyone to cross path of moving gate or door.
CAUTION
Instructions are Described and Illustrated Below
KG
KG
The Remote Control Batteries
———
———
WARNING
——
To prevent possible SERIOUS INJURY or DEATH:
• NEVER allow small children near batteries.
• If battery is swallowed, immediately notify doctor.
CAUTION
1. Press and release the “learn” button on
the motor unit. The learn indicator light
will glow steadily for 30 seconds.
2. Within 30 seconds, press and hold the
button on the hand-held remote.
3. Release the button when the motor unit
light blinks. It has learned the code. If
light bulbs are not installed, two clicks will
be heard.
To Erase All Codes From Motor Unit Memory
The lithium batteries should produce
power for up to 5 years. To replace,
pry open case with visor clip or
screwdriver, as shown. Insert
batteries positive side up (+).
Dispose of old batteries properly.
NOTICE: To comply with FCC and or Industry Canada (IC) rules, adjustment or modifications of
this receiver and/or transmitter are prohibited, except for changing the code setting or replacing
the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
To deactivate any unwanted remote, first erase all codes:
Press and hold the “learn” button on motor
unit until the learn indicator light goes out
(approximately 6 seconds). All previous
codes are now erased. Reprogram each
remote or keyless entry you wish to use.
Battery
positive
side up (+)
Replacement Parts
3V2032 Lithium battery .
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be u
sed in portable exposure condition without restriction

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : Chamberlain Group, Inc.
Description                     : GDO Accessories
Title                           : GDO Accessories
Create Date                     : 2002:06:20 15:02:36-07:00
Creator Tool                    : Microsoft Word
Modify Date                     : 2018:08:24 11:35:33+08:00
Metadata Date                   : 2018:08:24 11:35:33+08:00
Producer                        : Acrobat PDFWriter 2.0 for Windows
Document ID                     : uuid:4905de7f-bc94-43ce-ab47-c88df988fd9b
Instance ID                     : uuid:327d6708-66be-4f5e-820c-457ff235d1a2
Page Mode                       : UseOutlines
Page Count                      : 2
Author                          : Chamberlain Group, Inc.
Subject                         : GDO Accessories

EXIF Metadata provided by EXIF.tools