SYLVANIA LCD Television Manual L0705169

27PT6341 L0705169

User Manual: SYLVANIA SYLVANIA LCD Television Manual SYLVANIA LCD Television Owner's Manual, SYLVANIA LCD Television installation guides

Open the PDF directly: View PDF .
Page Count: 30

Download
Open PDF In Browser	View PDF

SYLVANIA
20" Digital / Analog
LCD TV
Owner's

Manual

LC200SL8

DU_
I TO
YOURECEIVE
MUST

CONNECT
DIGITAL_ANALOG
ANTENNA.SIGNALr

Q 2007 Funai Electric Co., Ltd.

WARNING:TO
REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.

CAUT,ON/ A

THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING
SHOCK IS PRESENTWlTHIN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

IMPORTANT

PARTS INSIDE. REFER SERVICING TO QUALIFIED
PERSONNEL.

INSTRUCTIONS

SERVICE

ARE

OPERATING AND MAINTENANCE
IN THE LITERATURE

ACCOMPANYINGTHE

APPLIANCE.

note is located on the rear of the cabinet.

Important

Safeguards

1o READ INSTRUCTIONS - All the safety and operating instructions
should be read before the appliance is operated.
2o RETAIN INSTRUCTIONS - The safety and operating instructions
should be retained for future reference.
3o HEED WARNINGS - All warnings on the appliance and in the
operating instructions should be adhered to.
4o FOLLOW INSTRUCTIONS - All operating and use instructions
should be followed.
5o CLEANING - Unplug TV from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and,
that for some specific reason, such as the possibility of the loss
of an authorization
code for a CATV converter, is not intended to
be unplugged by the user for cleaning or any other purpose, may
exclude the reference to unplugging the appliance in the cleaning
description otherwise required in item 5.
6o ATTACHMENTS - Do not use attachments not recommended by
theTV manufacturer as they may cause hazards.
7o WATER AND MOISTURE - Do not use this TV near water, for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub,
in a wet basement, or near a swimming pool, and the like.
_o ACCESSORIES - Do not place this TV on
an unstable cart, stand, tripod, bracket,
or table. The TV may fall, causing serious
injury to someone, and serious damage to
the appliance. Use only with a cart, stand,
tripod, bracket, or table recommended
by the
manufacturer, or sold with the TV.
Any mounting of the appliance should follow
the manufacturer's
instructions and should
use a mounting accessory recommended
by the manufacturer.
An appliance and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the
appliance and cart combination
to overturn.
AMEUBLES - Cet appareil ne dolt _tre plac_
que sur un meuble (avec ou sans roulettes)
recommand_ par le fabricant. Si vous I'
installez sur un meuble _ roulettes, d_placez
les deux ensembles avec precaution. Un arr6t
brusque, I'utilisation d'une force excessive
et des surfaces irr_guli_res risquent de
d_stabiliser I'ensemble et de le renverser.
9o VENTILATION - Slots and openings in the cabinet and the back
or bottom are provided for ventilation and to ensure reliable
operation of the TV and to protect it from overheating, these
openings must not be blocked or covered. The openings should
never be blocked by placing theTV on a bed, sofa, rug, or other
similar surface. This TV should never be placed near or over a
radiator or heat register. This TV should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is
provided or the manufacturer's
instructions have been adhered to.
0o POWER SOURCES - This TV should be operated only from the type
of power source indicated on the marking label. If you are not sure
of the type of power supply to your home, consult your appliance
dealer or local power company. For TVs intended to operate from
battery power, or other sources, refer to the operating instructions.

THIS UNIT.

THIS SYMBOL INDICATES THATTHERE

DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE

The important

A RISK OF ELECTRIC

Io GROUNDING OR POLARIZATION - This TV is equipped with a
polarized alternating-current
line plug (a plug having one blade
wider than the other). This plug will fit into the power outlet only
one way. This is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug should still
fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
2oPOWER-CORD PROTECTION - Power-supply cords should be
routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where they
exit from the appliance.
3oOUTDOOR ANTENNA GROUNDING - If an outside antenna or
cable system is connected to theTV, be sure the antenna or cable
system is grounded so as to provide some protection against
voltage surges and built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA No. 70, provides information
with respect to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and requirements for
the grounding electrode. (Fig. A)
FIGURE

EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CeDE

GROUND

4o LIGHTNING - For added protection for this TV receiver during a
lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the TV due
to lightning and power-line surges.
5oPOWER LINES - An outside antenna system should not be located
in the vicinity of overhead power lines or other electric light of
power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should
be taken to keep from touching such power lines or circuits as
contact with them might be fatal.
6o OVERLOADING - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.

17 OBJECT AND LIQUID ENTRY - Never push objects of any kind into
this TV through openings as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the TV.
18o SERVICING - Do not attempt to service this TV yourself as opening
or removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
19o DAMAGE REQUIRING SERVICE - Unplug this TV from the wall
outlet and refer servicing to qualified service personnel under the
following conditions:
a. When the power supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have fallen into the TV.
c. IftheTV has been exposed to rain or water.
d. If the TV does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions, as improper adjustment of other controls
may result in damage and will often require extensive work by a
qualified technician to restore the TV to its normal operation.
e. If the TV has been dropped or damaged in any way.
f. When the TV exhibits a distinct change in performance, this
indicates a need for service.

20° REPLACEMENT PARTS - When replacement parts are required, be
sure the service technician uses replacement parts specified by
the manufacturer that have the same characteristics as the original
part. Unauthorized substitutions
may result in fire, electric shock,
injury to persons or other hazards.
21 o SAFETY CHECK- Upon completion of any service or repairs to this
TV, ask the service technician to perform routine safety checks to
determine that the TV is in proper operating condition.
22 HEAT- This TV product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
23° WALL OR CEILING MOUNTING - This TV product should be
mounted to a wall or ceiling only as recommended
by the
manufacturer.

•

i ill!ill

!r,

[] Precautions

[@,AMp
IN,CDCONTAINS
MERCURY,
DISPOSE
ACCORDING
TOLOCAL,
STATE
OR
FEDERAL
,AW. ]

ATTENTION:
CAUTION:

POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
1
BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND.

FCCWARNING

This equipment

may generate

or use radio frequency

energy. Changes or modifications

to this equipment

may cause harmful interference unless the modifications are expressly approved in the manual. The user
cou d ose the authority to operate this equipment if an unauthorized change or modification is made.
i ill(

RADIO-TV

INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCCRules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
1} Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3} Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced
This Class B digital
Cet appareil

apparatus

num_rique

radio/TV technician

complies

with Canadian

de la classe B est conforme

for help.
ICES-O03.

_ la norme NMB-O03

du Canada.

Note to CATV system installer:
This reminder

is provided

for proper grounding

to call the CATV system installer's

and, in particular,

attention

specifies that the cable ground

to Article

820-40 of the NEC that provides guidelines

should be connected

to the grounding

system of the

building as close to the point of cable entry as practical

LOCATION
For safe operation

and satisfactory

performance

of the unit, keep the following

• Shield it from direct sunlight
and keep it away from
• Avoid dusty or humid places.

sources of intense

• Avoid

heat dissipation.

places with insufficient

ventilation

unit. Do not place the unit on a carpet
• Install the unit in a horizontal position.

for proper
because

• Avoid locations subject to strong vibration.
• Do not place the unit near strong magnetic
• Avoid

moving

the unit to locations

• Be sure to unplug
TO AVOID

THE

the AC power
HAZARDS

• Do not handle the power

where

cord from

directly

a place for its installation:

holes at the top and bottom

of the

holes.

fields.
temperature

differences

the outlet

before carrying

SHOCK

AND

are extreme.
the unit.

FIRE

wet hands.

• Do not pull on the power cord when disconnecting
• If, by accident, water is spilled on the unit, unplug
servicing.
• Do not place anything

selecting

Do not block the ventilation

this will block the ventilation

OF ELECTRICAL
cord with

in mind when

heat.

it from an AC outlet. Grasp it by the plug.
the power cord immediately
and take the unit to our authorized

service center

for

on top of the unit.

The serial number of this product may be found on the back of the unit. No others have the same serial number as yours. You
should record the number and other vital information here and retain this book as a permanent record of your purchase to aid
identification
in case of theft.
date of purchase

dealer ph0ne Nol

serial Nol

dea er purchasefrom

model No.

dealer address

Note about recycling:
This product's packaging

materials

are recyclable and can be reused. Please dispose of any materials

local recycling regulations.
Batteries should never be thrown away or incinerated

but disposed of in accordance

in accordance

with your local regulations

1
with your I
I
concerning I

chemical wastes.

[] Supplied
owner's

Accessories

manual

remote

(1 EMN22073)

• If you need to replace these accessories,
customer

control

batteries

(NF6OOUD)

support

line found

(AA x 2)

please refer to the part No. with the illustrations

• Depending
on your antenna system, you may need different
Contact your local electronics store for these items.

[] Symbols

for the symbols

types of combiners

[]Tilt

Used in this Manual

The following
is the description
in this manual.
Description

and call our toll free

on the cover of this manual.

used

(mixers) or separators

(splitters).

Stand

You can adjust
tile stand
oftheTV
(-2.5 ° to 10°).

refers to:

change

the

angle

10°
I
J

: Digital TV operation

: Analog TV operation
• If neither
heading,

symbol
operation

appears under the function
is applicable

to both,

_Features
• DTV/TV/CATV
- You can use your remote control to select channels which
are broadcast in digital, conventional analog, standard
definition, and high definition formats. Also, cable
subscribers can access their cable TV channels.

[] Contents
NTRODUCT

ImportantSafeguards
.................................................
Precautions
..........................................................
SuppliedAccessories
..................................................
SymbolsUsedinthis Manual...........................................
TiltStand............................................................
Features
.............................................................
Remote
ControlFunction
..............................................
Installingthe Batteries................................................
ControlPanel........................................................
RearPanel
...........................................................
Attaching
aWallMountBracket(s01d
separately)........................

• Program Information Display (DTV only)
- You can display the title, contents and other information
of the current DTV program on the TV screen.
• Auto Channel Scan
-This unit automatically scans and memorizes channels
available in your area, eliminating difficult setup
procedures.
• V-chip
-This feature allows you to block children's access to
inappropriate programs.
• Closed Caption Decoder
- Built-in closed caption decoder displays text for closed
caption supported programming.
• MTS/SAP Tuner
- Audio language can be selected from the remote control.
• Auto Shut Off Function
- If there is no signal input from the antenna terminal and
no operation for 1S minutes, the unit will turn itself off
automatically.
• Sleep Timer
-This feature will automatically turned off the power of the
unit at a specific time.
• Choices for On-screen Language
- Select your on-screen language:
English, Spanish or French.
• Stereo Sound Function
• PLL Frequency Synthesized Tuning
- Provides free and easy channel selection and lets you tune
directly to any channel using the channel number buttons
on the remote control.
• Component Video Input
• S-video Input
• AV Input
• Digital Audio Coaxial Output

CONN

2
3
4
4
4
S
6
6
7
7
g

9
10

SETNG

InitialSetup.........................................................
MainMenu.........................................................
AutoChannelScan...................................................
Language
Selection
..................................................
W/_(l (:}H NG

12
13
13
14

OPTONAL

IS
lS
16
16
17
Ig
Ig

'NG

<_HOOT

19
20
20
21
22
23
23
24

Troubleshooting
Guide...............................................
Maintenance
........................................................
NFORMAT

i i_iiii!
¸

ChannelAdd/Delete.................................................
PictureAdjustment..................................................
ClosedCaption......................................................
DTVClosed
Caption..................................................
DTVCC
Style.........................................................
BackLightSetting...................................................
ColorTemperature
...................................................
V-chip..............................................................
BLE

iiii!ili

ChannelSelection...................................................
VolumeAdjustment.................................................
Switching
EachMode................................................
Switching
AudioMode...............................................
Screen
Information
..................................................
TVScreenDisplay
Mode..............................................
SleepTimer.........................................................

TRO(

(°}/ON

BasicConnection
.....................................................
External
Device
Connection...........................................
N

i(b

27
28

i <3

Glossary
............................................................
CableChannelDesignations..........................................
GeneralSpecifications
................................................
ElectricalSpecification...............................................
OtherSpecifications
.............................................
LimitedWarranty
.............................................

29
29
29
29
29
Backcover

© 2007 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded
or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai.
Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content
the obligation to notify any person or organization of such changes.
_UNAIwith the _ design is a registered trademark of Funai Electric Co., Ltd and may not be
written consent of Funai. All other trademarks used herein remain the exclusive property of
contained in this manual should be construed as granting, by implication or otherwise, any
trademarks displayed herein. Misuse of any trademarks or any other content in this manual
aggressively enforce its intellectual property rights to the fullest extent of the law.

herein without

used in any way without the express
their respective owners. Nothing
license or right to use any of the
is strictly prohibited. Funai shall
iiiiiii:ii

•

[] Remote

Control

Function
1.

POWER button (p12)
Press to turn the unit on and off.
MUTE button (pl 5)
Press to turn the sound on and off.

10.

Press to return to previous menu
operation,
11.

SLEEP button (pl 8)
Press to activate the sleep timer.

digital mode (DTV) and analog
mode.
12.

from the major channel.
+100 button

information,

major channel. (DTV)
CH.A/V buttons (p15)
Press to select channels and the

• Press to display the channel
number, signal type and TV

external input mode,
VOL. "/buttons(p15)

External

setting.

ENTER button (p12)
Press to decide the command
displayed,
SETUP button

Mode

setting.
of

13. AUDIO button (p16)
Digital Mode (DTV)
Press to select the audio

(p13)

language,

" : change

minor channel

automatically
manually by using [CH. A/V]

Although, you cannot watch the high definition TV
(HDTV) program, the unit converts the HDTV signal
down

to the standard

definition

TV signal.

Note:
• "NO SIGNAL"will appear on the TVscreen after the minor
channel broadcast is over.

[] Switching

Each Mode

[] Switching

Youcaneasilyswitchwith the remotecontroltothe DTV(ATSC)
andTV
(NTSC)orto accessan external devicewhentheyare connectedtothe unit,

Press [INPUT] repeatedly to cycle through
digital TV, VIDEO1 and VIDEO2.

analog TV,

While receiving

API

[VIDEO1

]

L_ONOl

I
[VIDEO2]
• To use tile video or S-video
select "VIDEO1 ",
• To use the component
select "VIDEO2",

video

audio

F_AIN]

AUDIO

MODE]

press [AUDIO]

the available

MODE]

[DIGITAL
iNPUT

Mode

an MTS broadcast,

repeatedly to cycle through
channel.

-!
[ANALOG

Audio

Thissectiondescribes
howtoswitchthe audio in the analogmodeandhow
to switchtheaudiolanguagein the digitalmode,

input jack on the unit,
input jack on the unit,

Note_

MAIN

: Outputs

main-audio

SAP
MONO

: Outputs
: Outputs

second audio program
mono-audio

• The current
seconds.

• When you switch the analog mode to the digital mode,
it may take a while until the digital channel selection is
completed. The following TV screen is displayed while
switching the mode.

mode will automatically

Press [AUDIO]
language

to display the currently

and the number

of available

disappear

in 10

selected
languages.

AUDIO

NOWSCANNING

Press[AUDIO]

repeatedly

to cycle through

the available

audio languages.
[ENGLISH]
AUDIO

[SPANISH]
[FRENCH]
• Available

languages

broadcast.
language
languages
• The current
seconds.

differ depending

"OTHER" is displayed
cannot

be acquired,

are other

on the

when the audio
or the acquired

than English, Spanish or French.

mode will automatically

disappear

in 10

No re:
• Pressinq AUD O does not control external audio device.

[] Screen

i ,?i_

Information

Youcandisplaythe currently selectedchannelor otherinformationsuchas
the audiomodeonthe TVscreen.

Inthe analogmode,the currentchannelnumberis displayed.

Press [DISPLAY].

In the digitalmode,the detailedbroadcasting
informationfor the current
channelsuchas programtitle, programguidesare displayed.
Press [DISPLAY] repeatedly
available display modes.

to cycle through

the

_i!ii!_!i
_

OH10

[OFF]

DISPLAY

i izi!il
DISPLAY

[SROADCASTI.G
,.FORMAT,
• The current

channel

number

is displayed

at the top-

[PROGRAM

right corner of the TV screen.
• To clear the display, press [DISPLAY]

again.

[Broadcasting

Information]

• The following
information
1 channel number
2 broadcast
3 program

GUIDE]

is displayed,

station
title

4 audio language
(Refer to"Switching

Audio Mode"on

page 16.)

ii :iii!

[Program Guide]
• The program
information

guide added to broadcasting
is displayed.
i i%

ii 115

guide

No re:
• When the program guide consists of more than 6 lines, use
[Cursor AIv] to scroll
• "No description provided" is displayed when the program
guide is not provided.
• While the program guide is displayed, the closed caption
function is interrupted.
• In external input mode, the following screen is displayed;
e.g.) When an external device is connected to VIDEO1input
jack.
[

VIDE01
]

• Available languages differ depending on the broadcast.
• Theinformation display will automatically disappear in 1
minute.
• Pressing [AUDIO] does not control external audio device.

{TTV Screen

Display

Mode

[] Sleep Timer

2 types of display modescan beselectedin the digital modewhen the
broadcasting
stationissending16:9video signal.
Press [SCREEN MODE] repeatedly to switch the TV

Thesleeptimer can beset to automatically turn offthe unit after an
incremental period of time.

Press [SLEEP] to set the sleep timer.

aspect ratio,
SCREEN
MODE
SLEEP

SLEEP OFF

• Sleep timer display appears on theTV

2
LETTERBOX

ZOOM

Press [SLEEP] repeatedly
time until shut off.

to change

screen.

the amount

[LETTERBOX]
Display the digital-supported

program

in full-screen.

SLEEP

Black borders will spread in the upper and lower
screen,

SLEEP 120MIN

[ZOOM]
Enlarge and display
supported

the center area of the digital-

program.

The right and left side of image will be cut off,

No te:
• Youmay not switch the display mode depending on the
program.

• You can set your unit to turn off after a set period

time (from 30 to 120 minutes),
• Each press of [SLEEP] will increase the time by 30
minutes,
• After set up, the sleep timer display
for checking

To Cancel

by pressing

can be called up

[SLEEP].

the Sleep Timer

Press [SLEEP] repeatedly
on the TV screen,

until "SLEEP OFF" is displayed

No te:
• Thesleep timer setting display will automatically disappear
in 10seconds.
• When you disconnect the unit from the AC outlet or when o
power failure occurs, the sleep timer setting will be canceled.

[] Channel

i,?i_

Add/Delete

Thechanneladd/deletefunctionletsyouaddthechannelthat wasnot
addedby theauto channelscandueto the receptionstatusat theinitial
setting. Youcan also deletethe unnecessarychannels.
1

Press [SETUP] to display

Press [SETUP] to exit.

the main menu,
Note:
• "ADD/DELETE(DTV)" or "ADD/DELETE" menu will disappear
automatically
in about 10 seconds.
• In the digital mode (DTV), you can add or delete channels
only for major channel

Use [Cursor

A/V]

to select'CHANNEL

SETUP", then

press [ENTER].
e,g.) digital TV mode

• Once you delete a DTV channel you cannot recover the
channel without performing
auto channel scan again.
(Refer to "Auto Channel Scan" on pa.qe 13.)

- TV SETUP PICTURE
CHANNEL SETUP
V-CHFPSETUP

iiii!

LANGUAGE
GAPTION

[ENGLISH]
[OFF]

SACK UGHT
GOLOR TEMP
DWCC

[BRIGH?]
[NORMAL]

ii!ii_!!_
Use [Cursor

A/r]

to select "ADD/DELETE(DTV)"

or
ii :i:il

"ADD/DELETE", then press [ENTER].
e,g.) digital TV mode
- CHANNEL SETUP_- ADD_DELETE(DW)
AUTO PRESETCH(DTV)

AUTO PRESETCH(TWDTV)
AUTO PRESETCH(CATV)
! CAW takes appr0x 50rain

ii !!i,i_iii

Select the channel
"Channel

Selection"

you want to add or delete, (Refer to
on page 15.)
ii iii!i_

e,g.) digital TV mode
D25

ADD!DELETE:DTV
i?tJ

Use [Cursor

_11/I_] to select"ADD"or"DELETE".

• To add or delete another

channels,

repeat steps 4-5.

• Color of channel number
the TV screen indicates;

displayed

at the right top of

- Blue: The selected channel
- Red: The selected channel

will be added.
will be deleted,

[] Picture

Adjustment

[] Closed

Caption

Youcanadjustbrightness,contrast,color,tint and sharpness.

Press [SETUP] to display

Youcan viewclosedcaptioning(co)forTVprograms,moviesandnews.
Closedcaptionrefertotext ofdialogueordescriptions
displayedon-screen
forthehearingimpaired.

the main menu.

Use [Cursor A/V]
[ENTER].

to select"PICTURE",

Press [SETUP] to display the main menu.

then press

e.g.) digital TV mode
Use [Cursor
- WSETUP

PICTURE
CHANNEL SETUP
V-CHIP SETUP

A/Y]

to select"CAPTION",

[ENTER] repeatedly

to change

e.g.) digital TV mode

LANGUAGE
CAPTION
BACK LIGHT

[ENGLISH]
[OFF]
[SRIGHT]

COLOR TEMR
DTVCC

[NORMAL]

- WSETUP PICTURE
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE

Use [Cursor

A/V]

then press

the setting.

to select the picture quality

CAPTION
SACK LIGHT
COLOR TEMP
DTVCC

type you

[ENGLISH]
[OFF]
[BRIGHTj
[NORMAL]

want to adjust.

[OFF]

-I
[BRIGHTNESS]

[CAPTION1]

[CONTRAST]

[CAPTION2]
or

[COLOR]

[TEXT1 ]
[TINT]

,!
[TEXT2]

[SHARPNESS]

J
[Caption
Within

5 seconds, use [Cursor

_1 / I_] to adjust the

quality.

Mode]

CAPTION1

and TEXT1;

are the primary

caption

and text services.

The captioning
or text is displayed in the same
language as the program's dialogue
Cursor _1

Cursor I_

(up to 4 lines of script on the TV screen, where it does
not obstruct relevant parts of the picture).
CAPTION2 and TEXT2;

BRIGHTNESS

to decreasebrightness

to increase brightness

CONTRAST

to decreasecontract

to increase contract

are rarely available

COLOR

to decreasecolor

to brighten color

TINT

to add purple

to add green

only in special conditions, such as when "CAPTION 1"
or "TEXT1" is not available.

SHARPNESS

to make soft

to make clear

• There are 3 display
Paint-on

mode:

Press [SETUP] to exit.
Pop-on

mode:

and broadcasters

modes according

Roll-up mode:

Displays input characters

on theTV

they are displayed

Displays the characters
by scrolling

display will automatically

to programs:

screen immediately.
Once characters are stored in
memory,
once.

Note:
• Thepicture adjustmentsetting
disappear in 10seconds.

use them

all at

continuously

(max. 4 lines).

[] DTV

Closed

i ,?i_

Caption

3 Press
[SETUP]
toexit.
In addition to the basicclosedcaption describedon page20, DTVhasits
own dosed caption called DTVCCUsethis menuto changethe settings for
DTVCC,
FO_

_ote:
• To show the dosed caption on your TVscreen,
signal must contain the closed caption data.

Press [SETUP] to display the main menu.

broadcast

• Not all TVprogmms
and commercials
have the closed
caption or all types of the dosed caption.
• Captions and texts may not match
• Changing
seconds.

the TV voice exactly.

channels may delay the dosed caption

for a few

• Adjusting ormuting
the volume may delay the closed
caption for a few seconds.

Use [Cursor

A/V]

to select"DTVCC',

• Abbreviations,
symbols and other grammatical
shortcuts
may be used in order to keep pace with the on-screen
action. This is not a problem with the unit.
• The caption or text characters will not be displayed
the main menu or functions display is shown.

- W SETUP -

while

• If the unit receives poor quality television
signals, the
captions may contain errors, or there might be no captions
at all Some possible causes of poor quality signals are:
- Automobile
ignition noise
- Electric motor noise

• The unit retains

the dosed

(ghosts
caption

or screen

PICTURE
CHANNEL SETUP
V-CHIP SETUP

setting

if the power

LANGUAGE
CAPTION
SACK LIGHT

[ENGLISH]
[OFF]
[BRIGHT]

COLOR TEMP
_- _VSO

[NORMAL]

ii!ii_!!_
ii :i:i

Use [Cursor
press

flutter)

iiii!

e.g.) digital TV mode

• Ifa black box appears on the TVscreen, this means that the
dosed caption is set to TEXT mode. To dear the box, select
"CAPTION 1" "CAPTION 2" or "OFF'_

- Weak signal reception
- Multiplex
signal reception

iii_iiii!

then press

[ENTER].

A/V]

to select"CAPTION

[ENTER] repeatedly

SERVICE", then

to change

the setting.

fails.
- DWSO -

CAPTIONSERVICE

[SERVICEII6]

USER SET[ING
CAPTION SIZE
FONT STYLE
CHARACTEREDGE
FORE OPACITY

[ON]
[MEDDLE]
[STYLEU8]
[NONE]
[SOLID]

FORE COLOR
BACKOPACITY

[WHITE]
[SOLED]

BACK COLOR

FBLACKI

ii !!i,i_iii

i'll'i,

OFF

Select if you do not want
DTVCC. This is the default.
Select

CAPTION

SERVICE
SERVICE1-6

one of these before

changing
any other item in
"CAPTION" menu. Choose
"SERVICE1/6" under normal
circumstances.

Press

[SETUP]

to exit.

No te:
• "CAPTION SERVICE" thatyou
on the broadcast

can switch

differs depending

description.

[] DTVCC

Style

Youcanchangethestyleof DTVCCsuchasfont, colororsize,etc.

Press [SETUP] to display

the main menu.

• CAPTION

SIZE

Closed captioning

font size can be changed

as below.

• FONT STYLE
Font style of the displayed
below.
2

Use [Cursor A/V]

to select"DTVCC",

then press

[ENTER].

can be switched

caption

can be switched

• CHARACTER EDGE
Edge type of the displayed
as below.

e.g.) digital TV mode

caption

• FORE COLOR, BACK COLOR
- TV SETUP PICTURE

Font and background color of the displayed
can be switched as below.

CHANNEL SETUP
V-CHIP SETUP
LANGUAGE
CAPTION
SACK UGHT
COLOR TEMP
DWCC

• FORE OPACITY, BACK OPACITY

[ENGLISH]
[OFF]
[BRIGHT]
[NORMAL]

Text and background
opacity
can be switched as below.
CAPTION

Use [Cursor Air]
[ENTER] repeatedly

SIZE

of the displayed

caption

MIDDLE, LARGE, SMALL
STYLE1/8

Proportional
font used in the
menu screen

STYLE2/8

Monospaced

STYLE3/8

Proportionally
serifs

STYLE4/8

Monospaced

STYLE5/8

Proportionally
without
serifs

PONT STYLE
[STYLEI_8]
CHARACTER EDGE [NONE]

STYLE6/8

Casual font type

PORE OPACITY
FORE COLOR
BACK OPACITY
BACK COLOR

STYLE7/8

Cursive font type

STYLE8/8

Small capitals

to select'USER

SETTING", then press

to set to "ON".

• Items in the dotted
SETTING" is "ON".

caption

box are available

only when "USER

FONT STYLE

with

serifs

spaced with
with

serifs

- DTVCC-

CAPTION SERVECE [SERVICEIB]

[SOLID]
[WHITE]
[SOLID]
BLACK

',
;

CHARACTER

EDGE

NONE, RAISED, DEPRESSED, UNIFORM,
SHADOW

Use [Cursor Air]
[ENTER] repeatedly

to select an item, then press
to change the setting

CAPTION SERVECE
USER SETTENG
CAPTION SIZE
EONT STYLE

[SERVICEI_]
[ON]
[M DOLE]
[STYLEI_8]

CHARACTER EDGE
EONE OPACITY
EONE COLOR
BACK OPACITY

[NONE]
[SOLID]
[WHITE]
[SOLID]

BACK COLOR

rBLACKI

LEFT, SHADOW

RIGHT

FORE OPACITY

SOLID, TRANSLUCENT, FLASH

FORE COLOR

WHITE, BLACK, RED, GREEN, YELLOW,
BLUE, MAGENTA, CYAN, TRANSPARENT

BACK OPACITY

SOLID, TRANSLUCENT, FLASH

for the item.

- DTVCC-

spaced

BACK COLOR

BLACK, RED, GREEN, BLUE, YELLOW,
MAGENTA, CYAN, TRANSPARENT, WHITE

Press

[SETUP]

to exit.

i ,?i_

[] Back Light Setting

[] Color Temperature

Youcansetthe desiredbrightnessmode,

YoucanadjustcolortemperatureoftheTVscreen,

Press [SETUP] to display

Use [Cursor

AiV]

[ENTER] repeatedly

the main menu.

to select"BACK

LIGHT", then press

to change the setting.

Press [SETUP] to display the main menu.

Use [Cursor

A/r]

[ENTER] repeatedly

to select "COLOR TEMR", then press
to change

e.g.) digital TV mode

e.g.) digital TV mode
- W SETUP PICTURE

- TV SETUP PICTURE

the setting.

CHANNEL SETUP
V-CHFPSETUP
LANGUAGE
CAPTION
SACK UGHT

[ENGLISH]
[OFF]
[BRIGHT]

COLOR TEMP
DWCC

[NORMAL]

CHANNEL SETUP
V-CHIP SETUP
LANGUAGE
CAPTION
SACK LIGHT
COLOR TEMP
DTVCC

[ENGLISH]
[OFF]
[BRIGHT]
[NORMAL]

ii!ii_!!_

-'I
[BRIGHT]

!
[NORMAL]

[WARM]

[COOL]

[DARK]
_J
3

Press [SETUP] to exit,

ii iii:_il

[NORMAL]

Press [SETUP] to exit.

ii !!i,i_iii

ii ¸

ii iii!i_

ii:!!ii_i

.........
EN

[]V-chil
V-chip reads the ratings for programs, then denies access to the programs
which exceed the rating level you set. With this function, you can block
certain programming inappropriate for children.

Use [Cursor
1

Press [SETUP] to display

AIr]

to select"TV

RATING", then press

[ENTER].

the main menu.

e.g.) digital

TV mode

- V- CHIP SETUPTV RATING
MPAARATING
DOWNLOADABLERATING
CHANGEPASSWORD

Use [Cursor

Air]

to select"V-CHIP

SETUP", then press

[ENTER].
e.g.) digital TV mode
- W SETUP PICTURE
CHANNEL SETUP
V-CHFPSETUP

Use [Cursor AIr]

LANGUAGE
CAPTION
SACK UGHT

[ENGLISH]
[OFF]
[BRIGHT]

COLOR TEMP
DWCC

[NORMAL]

to select the desired

press [ENTER] repeatedly
and "BLOCK".

to switch

or
Use [the

Number

buttons]

numbers

for your

password.

to enter

TV-Y
TV-Y7 (
TV-G
TV-PG (
TV-14 (
TV-MA {

the 4-digit

rating, then

between

"VIEW"

IWEW]
) [VIEW]
[VIEW]
) [VIEW]
) [VIEW]
) [VIEW]

PASSWORD

Rating

• When

you

have

• When

the

password

SETUP"

not

set up your
is correct,

password,

0000.

description

for setting

e.g.) digital
=> page 24

B'""B. MPAA Rating"=> page 25

each

item.

TV mode

. v. CNFP
SETUP-

]

_ TVRATING

/ ,A

MPAARATING ..............................................................................
!,,,,,B

C'""C. Change Password"

DOWNLOADABLE
RATING
CHANGEPASSWORD--

=> page 26

Note:
• "DOWNLOADABLE
receives a digital

RATING" will be available
broadcast

when the unit

using the new rating system.

• When you select a rating and set it to "BLOCK" the higher
ratings will be blocked automatically.
The lower ratings will
be available for viewing.
• When you set the highest rating
to "VIEW" automatically.

to "VIEW" all ratings turn

• If the "PROTECTED PROGRAM" message appears during
your TV viewing, change to o channel that is not blocked.
Then, you can access "V-CHIP SETUP" menu and change the
setting to allow all TV viewing.
• To block any inappropriate
programming,
both "TV RATING" and "MPAA RATING".

setyour

limits in

• The V-chip setting will be retained after o power failure
(except the access code reverts to 0000).

TV-Y

Appropriate

for all children

TV-Y7

Appropriate
older

for all children

TV-G

General

TV-PG

Parental guidance

TV-14

Unsuitable

TV-MA

Mature

lower
7 and

audience

"V-CHIP

is displayed.

See the following

A'""A. TV Rating"

enter

the following

Category

General audience

Parental guidance

PG-13

Unsuitable

suggested

for children

under

TV-PG
TV-14

Restricted; under 17 requires accompanying
aarent or adult guardian

NC-17

No one under 17 admitted

TV-MA

Mature audience

TV-PG, TV-14

Press [SETUP] to exit.
Press [SETUP] to exit.

Note:

• Blocked sub ratings will appear beside the main rating
category in "TV RATING" menu.
I
• You cannot block a sub rating (D, L, S or V) if the main rating
is set to "VIEW'[
• Changing the category to "BLOCK" or "VIEW" automatically
changes all its sub ratings to the same ("BLOCK" or "VIEW").

the setting.

Use [Cursor A/r],
then press [ENTER] repeatedly
to change the setting.

iiiiill

only

Althoughthe default code"0000" issupplied with the unit, you can set
your own password.

Use [Cursor

A/V]

to select"CHANGE

PASSWORD", then

press [ENTER].
e.g.) digital TV mode
V - CHIP SETUPW RATING
MPAA RATING
DOWNLOACABLERATING
CHARGE PASSWORD

Press [the Number
enter

buttons]

the new 4-digit

• Enter password

again

on the remote

control

password.
in "CONFIRM

PASSWORD:'

space,
NEW PASSWORD

CONFIRM

PASSWORD

_¸

Press [SETUP] to exit.

Note:
• Make sure new password and confirm password must be
exactly the same. If they are different, the space is cleared
for reentering.
• Your password will be erased and return to the default
(0000) when a power failure occurs. If you forget the
password, unplug the power cord for 10 seconds to restore
the password to 0000.

[]Troubleshooting

Guide

If the unit does not perform properly
once before calling for service.

No power

when operated

as instructed

in this owner's

Be sure the power cord is plugged in.
If a power failure occurs, unplug the power cord for 30 minutes
reset itself.

No picture

or sound

• Turn off the power and wait for about

to allow the unit to

1 minute,

then turn it on again,

• Check the antenna or cable connection to the main unit,
• When the outside antenna is used, check the wire condition and connection,
• View other TV channels, The problem might be limited to the broadcasting
station,
• Adjust the"COLOR" in the main menu,

OK, picture

poor

• Check the antenna or cable connection to the main unit,
• When the outside antenna is used, check the wire condition

and connection,

Electrical interference from nearby appliances may affect picture quality,
• Adjust"CONTRAST"and
"BRIGHTNESS" in the main menu,
• View other TV channels, The problem might be limited to the broadcasting
Picture

chart

• Check if the power is on,
• Check the outlet connection,
• Check the antenna or cable connection to the main unit,
• When the outside antenna is used, check the wire condition and connection,
• View other TV channels, The problem might be limited to the broadcasting
station,

No color

Sound

manual, check the following

station,

• When the outside antenna is used, check the wire condition and connection,
• View other TV channels, The problem might be limited to the broadcasting station.

distorted

• Check the antenna

Weak picture

or cable connection

to the main unit,

• When the outside antenna is used, check the wire condition and connection,
• Adjust"CONTRAST"and
"BRIGHTNESS" in the main menu,
• View other TV channels, The problem might be limited to the broadcasting
station,
Lines or streaks

in picture

• When the outside antenna is used, check the wire condition and connection,
Electrical interference from nearby appliances may affect picture quality,
• View other TV channels, The problem might be limited to the broadcasting
station.

Picture

blurred

• When the outside antenna is used, check the wire condition and connection.
• View other TV channels. The problem might be limited to the broadcasting
station.

Ghosts

in picture

• Check the antenna or cable connection to the main unit.
• When the outside antenna is used, check the wire condition

and connection.

Electrical interference from nearby appliances may affect picture quality.
• View other TV channels. The problem might be limited to the broadcasting

station.

Bars on screen

• When the outside antenna is used, check the wire condition and connection.
Electrical interference from nearby appliances may affect picture quality.

Picture rolls vertically

• When the outside antenna is used, check the wire condition and connection.
Electrical interference from nearby appliances may affect picture quality.
• View other TV channels. The problem might be limited to the broadcasting
station.

Different
screen

Move the unit away from nearby electric appliances. Turn off the power and wait
30 minutes before turning it back on.
• View other TV channels. The problem might be limited to the broadcasting
station.

color marks on

Poor reception
channels

on some

• Check the antenna or cable connection to the main unit.
• When the outside antenna is used, check the wire condition and connection.
Electrical interference from nearby appliances may affect picture quality.
• View other TV channels. The problem might be limited to the broadcasting station.

Picture OK, sound poor

• View other TV channels.

No reception

Make sure auto channel scan has been completed
(Refer to"Auto Channel Scan"on
page 13).
Auto channel scan must be completed when you set up the unit for the first time
or move it to a location where previously unavailable channels are broadcast.
• The selected channel may not be broadcasting.
• When auto channel scan is interrupted
and not completed, some channels will not
be received. Make sure to complete (Refer to "Auto Channel Scan" on page 13).

of digital signals

The problem

might be limited to the broadcasting

station.

Theentered
channel
number Many
digital
channels
have
alternate
channel
numbers.
Theunitchanges
the
changes
automatically
numbers
automatically
totheones
signifying
thebroadcasting
stations.
These
are
thenumbers
used
foranalog
broadcasts.
Remote
control
does
notwork •Check
theantenna
orcable
connection
tothemain
unit.
•Check
thebatteries
oftheremote
control.
•Check
ifthereisanobstacle
between
theinfrared
sensor
window
andtheremote
control.
•Test
thesignal
output.
IfOK,thenpossible
infrared
sensor
trouble.
(Refer
to"lRSignal
Check"on
page
28.)
•Aimtheremote
control
directly
attheinfrared
sensor
window
onthefrontofthe
unit.
Reduce
thedistance
totheunit.
Re-insert
thebatteries
withtheirpolarities
(+/-signs)
asindicated.
Problems with Closed Caption Feature
Misspelled
displayed,

captions

are

Captions are not entirely
displayed, or captions are
delayed behind the dialogue,

Captions are displayed as a
white box.
No caption is displayed in the
closed caption-supported
program.

• Closed captioning
production
companies may broadcast
correcting the misspelling in a live broadcast.

without

• Captions that are delayed a few seconds behind the actual dialogue are common for
live broadcasts. Most captioning production companies can display a dialogue to a
maximum of 220 words per minute. If a dialogue exceeds that rate, selective editing is
used to insure that the captions remain up-to-date with the current TV screen dialog ue.
Interference from buildings or weather conditions may cause captioning
to be
incomplete.
Broadcasting station may shorten the program to insert advertisement.
The closed
caption decoder cannot read the information
of the shortened program.

No caption is displayed
when playing the videotape
containing
captions.

• The videotape may be illegally
read during copying.

Black box is displayed
TV screen.

• "Text" mode is selected for caption.

in the

programs

copied, or the caption

Select"CAPTION

signal might

not have been

1","CAPTION 2" or"OFF".

Note:
• The LCDpanel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of
blue, green or red. This is not to be considered a defect in the LCDscreen.
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner's manual for more
details on correct operations.

[] Maintenance

• Wipethe front panel and other exteriorsurfacesof the unit with a soft
cloth immersedin lukewarmwater and wrung dry.
• Neverusea solvent or alcohol. Donot spray insecticideliquid near the
unit. Suchchemicalsmay causedamageand discoloration to the exposed
surfaces.

Wipe the panel of the unit with a soft cloth. Beforecleaningthe panel,
disconnectthe power cord.

Shouldyour unit becomeinoperative, do not try to correctthe problem
yourself.Thereare no userserviceablepartsinside. Turnoffthe unit,
unplug the power cordand call ourtoll free customersupport line found on
the coverof this manualto locateanauthorized servicecenter.

If the remotecontrol isnot workingproperly, you can usean AM radioor
digitalcamera(includinga cellular phonewith built-incamera)to seeif it
issendingoutan infraredsignal.
•With an AMradio:
Tunethe AMradio station toa non-broadcasting
frequency.Pointthe remote controltowardsit,
pushany buttonand listen. If the soundfrom
the radioflutters, it is receivingthe remote
control'sinfraredsignal.

7 _"

• With a digital camera
(including built-in cell
phonecameras):
Pointa digitalcameratowardsthe remotecontrol.
Pushany buttononthe remotecontrolandlook
throughthe digitalcamera. If the infraredlight
appearsthroughthe camera,the remotecontrolis
working.

i ,71_

[]Glossary
ATSC

Dolby Digital

Password

Acronym that stands for Advanced
Television Systems Committee and the
name of the digital broadcasting standards,

The system developed by Dolby
Laboratories to compress digital sound. It
offers stereo sound (2ch) or multi-channel

A stored 4-digit number that allows
to parental control features.
SAP (secondary

audio.
Aspect Ratio
The width

Second-audio

of a TV screen relative

EDTV (enhanced

to its

height. Conventional
TVs are 4:3 (in other
words, theTV screen is almost square);
widescreen
models are 16:9 (the TV screen
is almost

twice

as wide

Enhanced digital format
progressive signal.
HDTV (high

Video

digital

resolution

This is a video signal format that conveys
each of 3 principal colors of light (red,

NTSC

blue and green)

Acronym

through

different

signal

[] Cable

including

Channel

format

from

that takes 480-line

main-audio

channel.This

separately
audio

channel is used as an alternate
broadcasting.

TV)

SDTV (standard

current

that produces

high

Standard

and high picture quality.

definition

in bilingual

digital

NTSC picture

format

TV)

that is similar to the

quality.

S-video
that stands for National

Systems Committee

lines.This allows the viewers to experience
picture colors as original as it is.There are
several signal formats,
andY/Cb/Cr.

definition

TV)

program)
delivered

as its height).
Ultimate

Component

definition

audio
channel

access

analog

Television

Offers higher quality images by delivering
each signal, color (c) and luminance
(y)

and the name of the

broadcasting

standards.

independently
of each other through
separate cables.

Y / Pb / Pr

Designations

If yousubscribeto cableTV,the channelsaredisplayedas1-13£
Cablecompanies
often designatechannelswith lettersor letter-numbercombinations.Pleasecheckwith yourlocalcablecompany.
Thefollowingisa chartofcommoncablechanneldesignations.

ii iii:_il

TV D]spEay

TV DispEay

TV Display

100

101

102

103

104

105

TV Display

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

TV Display

127

128

129

130

131

132

133

134

135

[] General
TV format:

Specifications
ATSC/ NTSC-M
TVstandard

system:
§15.122/FCC
(digitalCO) §15.119/FCC(analogCC)
Channel coverage (ATSC/NTSC):
Terrestrial
VHF: 2~13 UHF: 14~69

[] Electrical
Sound output:

Specification
1W,8_x2

Closed caption

CATV

2~13, A~W, W+1 ~W+94 (analogW+1 ~W+84),
A-S~A-I, SA

Tuning system: Channelfrequencysynthesizedtuning system
Channel access: Directaccesskeyboard,
Programmablescan,and upldown
Terminals:
Antennainput: VHF/UHF/CATV
75_ unbalanced(F-type)
S-video input: Mini DIN4-pin jackx 1 Y:1Vp-p(75_)
C:286mVp-p(7S_)
Videoinput:
Audioinput:

[] Other
Operating

120VAC+/- I0%, 60Hz+/- 0.5%
Power consumption
(maximum):
60W
LCD:
Dimensions:

Coaxialdigital audiooutput:
RCAjack xl
Headphone: % inches

Weight:
Y: 1Vpp (75_)
Pb: 700mVp p (759)
Pr: 700mVp-p(75Q)
500mVp-p(75_)
(3.5mm)

temperature:
41°F(S°C)to 104°F(40°C)

Power requirements:

RCAjackx 1
lVp-p (75_)
RCAjackx4
2Vrms
(inputimpedance:morethan 22k_)

Componentvideo input:
RCAjack x3

Specifications

Remote control: Digitalencodedinfraredlightsystem

20 inchesVGApanel
W: 23% inches

(594mm)

H: 17% inches

(454mm)

D: 8%_inches

(204ram)

11.7Ibs.

(S.3kg)

• Designsand specificationsare subjectto changewithoutnotice and
withoutour legalobligation.
• If thereisa discrepancy
betweenlanguages,the defaultlanguagewill
be English.

SYLVANIA
LIMITED WARRANTY
FUNAI CORR will repair this product,
workmanship
as follows:

free of charge in the USA in the event of defect in materials or

DURATION:
PARTS:

FUNAI CORP.will provide parts to replace defective parts without charge for one (1) year
from the date of original retail purchase. Certain parts and LCD image burn-in are excluded
from this warranty.

LABOR:

FUNAI CORP.will provide the labor without charge for a period of ninety (90) days from the
date of original retail purchase.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLYTOTHE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR
OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCTTO
OBTAIN SERVICE UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,
missing or if service was attempted by an unauthorized
service center.This limited warranty does not
apply to any product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occur during
normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs,
alterations or products not supplied by FUNAI CORP.,or damage, which results from accident, misuse,
abuse, mishandling, misapplication,
alteration, faulty installation, improper maintenance, commercial use
such as hotel, rental or office use of this product, or damage which results from fire, flood, lightning or
other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL),
ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP.AND ITS REPRESENTATIVESOR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL,
INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BYTHE USE OF OR THE
INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING
THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
DISCLAIMED BY FUNAI AND ITS REPRESENTATIVESIN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO
PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRCOSTS WILL BE
CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY
FROM STATETO STATE. IF,AT ANYTIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN
SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.

ATTENTION:
FUNAI CORR RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.
WARRANTY

STATEMENT

REGARDING

NON AUTHORIZED

REPAIRS:

To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its
original packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE
CENTER. FUNAI CORP.will not reimburse you for any service done by unauthorized service providers
without prior written approval.

To locate your nearest AUTHORIZED SERVICE CENTER or for general
please contact us at:
FUNAI CORPORATION
Customer Service
Tel : 1-800-968-3429
http'//www.SylvaniaConsumerElectro
19900

Printed

in China

Van

Ness Avenue,

Torrance,

service

inquiries,

nics.com
CA 90501

A7140UH
1EMN22073

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 30
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Fri Jun 29 11:09:21 2007
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

SYLVANIA LCD Television Manual L0705169

27PT6341 L0705169

Navigation menu

Versions of this User Manual:

Views

Navigation