SYMA MODEL AIRCRAFT GC88752-14 R/C DRONE User Manual X5C
GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD R/C DRONE X5C
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3380649 |
| Application ID | BiXL1gTZhJA8dZFF8JeNtA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 283.07kB (3538423 bits) |
| Date Submitted | 2017-05-05 00:00:00 |
| Date Available | 2017-05-05 00:00:00 |
| Creation Date | 2017-04-12 11:07:03 |
| Producing Software | Adobe PDF library 10.01 |
| Document Lastmod | 2017-04-12 11:16:38 |
| Document Title | X5C 英文说明书 |
| Document Creator | Adobe Illustrator CS6 (Windows) |
® X50- ‘ 40H 2.46 REMOTE CONTROL OUADCOPTER h INSTRUCTION MANUAL IMPLEMENT STANDARD: GB/T26701-2011 PREFACE Dear Customers. Thank you for purchasing our flying model.Please read this instruction manual carefully in order to master the skill more quickly and operate this product more safely.ln the mean time,please well keep the original of this instruction manual for future reference. IMPORTANT INSTRUCTION 1.This product is not a toy but a precisive equipment that integrating mechanics and electronics with expertise of aerodynamics and high—frequency transmitting. It requires to be correctly assembled and debugged so as to prevent the accident from being happenedThe product owner should operate or control it in safe way. Please noted that we won’t take any responsibility for any wrong operation as this may result in severe injury or loss of property and we can not control the operating process during the time when the user assemble or use this product. 2.This product is suitable to be used by people who has operating experience in flying model or age no less than 14 years old. 3.The flying ground we required should be the local field and legal for remote control flying. 4.0nce this product is sold , we won't be responsible for any safety responsibility during the time the user operates or uses or controls this product. 5.If there is any problem occurred during the time of using. operating or repairing. please reach our sales agent for detailsThe sales agent that we authorized will provide you with the technical support and after-sale service. 6 The suitable temperature of the products' flight is from minus ten degrees to forty degrees centi-rade. SAFTY&CAUT|ONS This R/C flying model is a high dangerous commodity.Please make sure that it should be flied far away from the crodelease also pay more attention to the phenomenon such as incorrect assembly or damaged model or incorrect connection of electronic control equipmentPlease also pay attention to the flying safety when operating and know more about the accident that may be happened due to your own negligence. 1. Keep it far away from the barrier or crowd. 2.Keep it far away from the moisten environment. 3.Use this product correctly and avoid operating by your own. 4. Keep it far away from the high-speed rotating part and heat source. 5. Please conform to the sequence of power ON/OFFAs the picture below shown, incorrect sequence of power ON/OFF may cause this product out of control and affect your own safety or others. Please form a good habit of switching on or switching off this product correctly. CONTENTS 0 Quadcopter I USE Charging Cable 0 Transmitter - Screwdriver - Main blades - instruction manual . Screw 4PCS GET TO KNOW YOUR TRANSMITTER Introduction of transmitter Antenna indicaiur /3D Eversion Left :untroi . Right comrai iaver iever iAceeieraier) High/Low speed swrten Photo and video (this ‘ ’ Forward and function tor item rm, X50) r gfitnweerd Left Fine elunirigwme 1) ' Mode switch Sidewavd FinErlUNnQ (Mode 2i . Sideward Fine-tunlng (Mode 1) Left Fine -|umngiMode 2i Power omorr LCD Dispiayer Remote control Insta _,-a Battery Cover ,3 x AA(LR06) 1 5v Batteries Figure 1 Figure 2 1 Use a screwdriver to remove the screw on the back of iransmriier,ihan open the battery cover(Figure 1). 2.lnstall 4 “AA" batteries (not included) into the back oi transmitter than replace battery cover and reinstall the screw (Figure 2). ‘i.lnstaii batteries with correct polarity. 2.Do not mix old and new batteries. 3.Do not mix different types of batteries. REMOTE CONTROL KEYPAD AND LCD MANUAL ||||||| ~- 01.Sidewerd Fine-tuning :Power-on start in the centering.(Be turn Left/Right Fine -tuning In ModeZ) 02.Forward/Backward fineetuning:Powereon start in the middle. 03.Turn Left/Right fine-tuningzPower-on start in centering.(Be Sidewoard Fly Fine -tuning in ModeZ) 04.Throttle show:Power—on start in lowest level.(Left and Right throttle shows at one time) 05 Forward showsPower—on start in the lowest level (At the center spuare) OBBackward shows:Power-on start in the lowest level.(At the center spuare) O7.Right sidewaml fly shows:Powervon start in the lowest level.(At the center spuare) 08.Left sideward fly shows:F'ower—on start in the lowest level,(At the center spuare) 09.Turn left: Pull left function lever to left. it will be higher, than quad copter turn left faster. 10.Turn right: Pull left function lever to right, it will be higher, than quad oopter turn right faster. 1i .High/Low speed: Press button “A" for seconds to switch between high speed mode or low speed mode. “H" means high speed and “L" means low speed, 12.Power shows:According to the battery's energy for the controller. 13.Defeult mode when power-on.When change to MODE 2, please keep pressing button "B" to right than return on the power of transmitter, the MODE on LCD displayer will be changed. Same steps to change to MODE 1 again. 14.Signal showszNormally to full frame. READY TO FLY YOUR QUADCOPTER Step 1: Press the ON/OFF Step2: Open the battery Step 3: Close the battery power switch up, cover and insert the cover and turn on battery into power the quadcopter. port. Step 4:Push the throttle lever to the highest position, and then pull It back to the lowest position. There will be one clear sound from the transmitter. this shows that the quadcopter has entered into the preefly state. TIFS:When syncing your quadcopter keep . it in a horizontal position to start to a 1,: - mm stable flight. VIIIIIIIIIIIIIIIIIIA CAUTIONS: 1tWhen the Indicator of transmitter keep light on but the indicator of quadcopter is blinking slowly. it means signal matching was not successfull Please turn off the power both oftiansmitter and quadcopter than restart the transmitter and quadcopter. 2.Ifthe quadccpter is fill flying to on side dramatically or spinning while hovering, please switch off the power of both the quadcopter and transmitter and then repeat the pre-flying steps. 3tWhen the indicator of the quadcopter keeps flashing slowly, it means that the quadcopter has entered into the low battery state. This time you need to charge the quadcopler with the use cable provided. CHANGE BATTERY OF QUADCOPTER 1.Push the on/off switch of quadcopter to OFF position than open the battery 2.Pull out the battery wire from the power port, 3.Take out the USB charging cable, and insert the battery power port to the small and of it (Make sure the ports connect tight and correct). 5.Reconnect the battery wire to power port than close the battery cover. 4.To charge battery, please insert the USB port of provided USB charging cable to anyone USB port of computer. The indicator on USB cable will light ON during charging battery. than it will light OFF when battery ful y charged Caution: When using the computer for charging, please remember to pull out the charging cable before shutting down the computer.Take the battery cover , and close the battery cover on the quadooptert CAUTIONS WHEN CHARGING 1.When charging, please put this product on a dried or ventilated area and keep it far away from heat source or explosive product. 2.When charging. please remove the batteries from the quadcopter. Then charging process should be supervised by an adult so as not to cause an accident. 3.After flying, please do not charge the battery it the surface temperature is still not cool. Otherwise it may cause a swollen battery or even a fire hazard. 4.Please make sure that you use the original USB charging cable providedWhen the battery has been used for a longtime, or appears to be swollen, please replace them 5.A battery when not in use for a long time will lose its charge automatically. Charging or discharging too often may reduce the life of the battery BATTERY REPAIR & MAINTENANCE 1.Battery should be put in the dried or ventilated place with enviroment temperature about 18-25'C. 2.|n order to enhance the using life of the battery, please avoid repeat charging or excessive discharging. 3.When the battery needs to be stored for a long time,please charge the battery first.That is to say, charge the battery for about 50-60% of the volume and then well store it. 4.lf you do not use it for more than 1 months, it‘s highly recommended that you need to check the battery voltage every month so as to make sure the voltage no less than 3V. Otherwise please do by following N013) mentioned. INSTALL LANDING SKIDS & BLDAE PROTECTING FRAME Figure] Figure2 1.lnstall the landing skids to the bottom of ouadcopter (Figure 1). 2.|nsta|| the blade protecting frame to every corner than lock screws (Figure 2). CONTROLLER MODES & INSTRUCTIONS The transmitter built-in two modes, Mode 1 & Mode 2, in line with different customer's usage pattem. Keep pushing button B to right, than turn on the transmitter power to change Mode 1 or Mode 2. MOD 1 Operating direction Hover up and down Forward and backward Push the throttle up or down, the Push the direction lever up or down, the quadcopter flies upward or downward. quadcopterflies forward or backward, Turn Left and Right Sideward fly ‘ K Pull the throttle left or right, the Pull the direction iever iett or right, the quadoopter turns to left or right. quadcopter flies to left side or right side. Fine-tuning operation Forward/Backward fine- tuning Sideward fly tine tuning Turn left/right fine tuning egt’tw When the quadcopter keeps When the quadoopter keeps When the quadoopter keeps flying forward / backward, you tiying to left/ right side, you rotating to left lright, you can can correct it by pressing can correct It by pressing the Correct it by pressing the fineetuning button down / up, Finertuning button right / left finertuning button right / left. MODE 2 Operating direction Hover up and down Forward and backward Push the throttle up or down, the Push the direction lever up or down, the quedoopter flies upward or downward. quadcopter flies forward or backward. Turn Left and Right Sideward “fly Pull the direction lever left or right, the Pull the throttle left or right, the quadcopter turns to left or right. quadoopter flies to left side or right side. Fine-tuning operation Forward/Backward fine- -tuning Sideward flyI hne- -1uning Turn left/vn'ghl fine- -tuning ‘ f" efit‘es wee When the quadcopter keeps When the quadoopter keeps When the quadoopter keeps flying forward I backward. you flying to left I right slde, you rotating to left (right, you can can correct it by pressing can correct it by pressing the Correct it by pressIng the fine-tuning button down / up. fine—tuning button right / left. fine-tuning button right / left. INTRODUCTION TO QU DCOPTER FUNCTIONS Low-voltage protection: When the quadcopter battery Is not enough) the rotors Will be stopped power supplyAs the quadcopter control systemWill protected battery automatically. Over-current protection: When the quadcopter's rotating blade is collided or jammed, the control system will stop supplying power for the rotors automatically, Then please re-match the signal for flying. Restart function: in case of flight disorder or sideward flight, restore factory default settings by the ®.Press the power switch to turn on the transmitter. (2).Fress the power swrtch to turn on the quadcopter. @.When the quadoopter indicator quickly flashing to slowly flashingplease push the throttle lever to the highest positionand then pull it back to the lowest position.Then the quadcopter indicator changed from slowly flashing to normal lights up. @Place the quadcopter on a horizontal postion, then push transmitter both left and right lever to lowest right conner for about 2-3 second , indicator on the quadcopter changed from normal lights up to quickly flashing ;After 2-3 second ,the indicator changed to normal lights,it means the quadoopler restarted Ireset successfully. 3D EVERSION AND THROWING FLIGHT INSTRUCTIONS When you are familiarwrth the basic operation, you can do some awesome & exciting tricks and stunts! First of all, fly the aircraft to a height of more than 3 meters, press the 3D Eversion switch on the rear right side of the transmitter, then push the right rudder(in any direction) to make 360 degree flip. Tips:SD aversion goes better when battery power is enough. Thanks to the 6 axis gyroscope, you can throw the quadcopter and push the throttle right up, it will automatically level out and hover smoothly in the sky. This can also be done when the quadcopter isrolling. LL CAMERA 1, Push the camera into a hold on the battery cover (Figure 1). 2. Open the battery cover with camera (Figure 2), 3. Lock screws to add-on the camera tight (Figure 3). 4. Close the battery cover with camera than insert the 3-pin plug to the hold in side (Figure 4). PHOTOGRAPHY I VIDEO INSTRUCTIONS: 1. Methods: @ Make sure the 3-pin plug of camera is inserted to the quadcopter. ® Turn the quadcopter power on, the camera works normally when the RED indicator change form flashing to green and keep light on If the RED Indicator just light on and light off seconds later. it means the SD card is not in the camera. Please Insert the SD card, than the indicator light on GREEN. 2.Get to know take photo and video: ® Turn on the transmitter and pull left lever up and down to connect signal between quodcopter and transmitter. ® Take Photo: Make sure camera normally work, when push the button "C" up. camera will take a photo after a beep from transmitter and the GREEN indicator on camera will be RED and flash on time. ®Take Video : Make sure camera normally work , when pull the button “C" down camera starts to take video . after a beep from transmitter and the GREEN indicator on camera will change to RED than keep flashing Press the button “C" slightly again another beep from transmitter means video stopped and the RED flashing light on camera will be GREEN and keep light on. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation, ifthis equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: uReorient or relocate the receiving antenna. olncrease the separation between the equipment and receiver. oConnect the equipment into an outlet on a circuit different from that to which the receiver is connected, .Consult the dealer or an experienced radio/TV technician for help, “This device complies with FCC radiation exposure limits set forth for general population (uncontrolled exposure). This device must not be collocated or operating in conjunction with any other antenna or transmitter." Decoration of Conformity Inserts: “Hereby, GuangDong Syma model aircraft industrial co.,ltd, declares that this drone is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU A copy of the full Doc is attached TROUBLE SHOOTING Problem Reason Solution inuadmpter battery power not enough 2 Transmitter battery power not enough. 3.The band or the transmitter does not correspond to the decoding ol the quadcopler. No response horn the quadcopler i,Charge the quadco ler 2 Charge or replacet em rt required. 3,Adrust the band on the transmitter and keep rt the same as the quadcepter, ll the quadcopler rs slow to respond or difficult to manueuver 1 insuttcient power with the transmitter 2 Transmitter ol the same frequency is used nearby. 1 Replace the battery 2 Use the helicopter out of the range or other RC quadcopter. SPARE PARTS All the sare parts below can bought from local distributor. X50-01 Body cover X56-02 Main blades X5C‘03 Protecling frames X50~04 Landing skids E’. X50-05 Motor holder XSC-OG Lampshades X50~09 Light boards X564 0 Receiver board \\\ .Jy Transmitter X504 1 X504 2 Battery USE charging cable BREAKDOWN & DIAGRAM Upper body Receiver motor Gear ml Lower body Motor holder Landing skids Rotating blade Reversing biade Lampshades Light boards Camera ' rotecti ng fra mes Receiver board Battery cover Battery Rotating motor Battery cover MAIN PARAMETER 31. Sam Body length: 31.5cm Body width: 31‘50m Body high: 7.5cm Main motor code: 95 7 Battery: 3.7V 500 mAh Li-poly .13.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Format : application/pdf Title : X5C 英文说明书 Metadata Date : 2017:04:12 11:16:38+08:00 Modify Date : 2017:04:12 11:16:38+08:00 Create Date : 2017:04:12 11:07:03+09:00 Creator Tool : Adobe Illustrator CS6 (Windows) Thumbnail Width : 256 Thumbnail Height : 200 Thumbnail Format : JPEG Thumbnail Image : (Binary data 22169 bytes, use -b option to extract) Instance ID : uuid:0828ce46-fd27-41fd-8896-76ee30620531 Document ID : xmp.did:DF6C1A162D1FE71195EBDD8F5AA7BA98 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:2304d5ad-13c6-af41-8646-360ef867abec Derived From Document ID : xmp.did:0980117407206811822A897E387FE54C Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved History Instance ID : xmp.iid:DF6C1A162D1FE71195EBDD8F5AA7BA98 History When : 2017:04:12 11:06:56+08:00 History Software Agent : Adobe Illustrator CS6 (Windows) History Changed : / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : \\Kf-03\本地磁盘（d）\暂放\jpg\X5C 英文说明书-14.jpg, \\Kf-03\本地磁盘（d）\暂放\jpg\X5C 英文说明书-13 副本.jpg, \\Kf-03\本地磁盘（d）\暂放\jpg\X5C 英文说明书-11 副本.jpg, \\Kf-03\本地磁盘（d）\暂放\jpg\X5C 英文说明书-12 副本.jpg, \\Kf-03\本地磁盘（d）\暂放\jpg\X5C 英文说明书-9 副本.jpg, \\Kf-03\本地磁盘（d）\暂放\jpg\X5C 英文说明书-10 副本.jpg, \\Kf-03\本地磁盘（d）\暂放\jpg\X5C 英文说明书-8 副本.jpg, \\Kf-03\本地磁盘（d）\暂放\jpg\X5C 英文说明书-7 副本.jpg, \\Kf-03\本地磁盘（d）\暂放\jpg\X5C 英文说明书-6 副本.jpg, \\Kf-03\本地磁盘（d）\暂放\jpg\X5C 英文说明书-5 副本.jpg, \\Kf-03\本地磁盘（d）\暂放\jpg\X5C 英文说明书-4 副本.jpg, \\Kf-03\本地磁盘（d）\暂放\jpg\X5C 英文说明书-3 副本.jpg, \\Kf-03\本地磁盘（d）\暂放\jpg\X5C 英文说明书-2 副本.jpg, \\Kf-03\本地磁盘（d）\暂放\jpg\X5C 英文说明书-1 副本.jpg Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : False N Pages : 1 Max Page Size W : 141.986165 Max Page Size H : 215.011165 Max Page Size Unit : Millimeters Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 明亮 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000002 Swatch Groups Colorants Magenta : 90.000004 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 10.01 Page Count : 14 Creator : Adobe Illustrator CS6 (Windows)EXIF Metadata provided by EXIF.tools