SYMA MODEL AIRCRAFT SYMA20160606 R/C TOYS User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3176927
Application ID	nSc/NsN1ppz6jtQdLZ8MBA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	257.88kB (3223543 bits)
Date Submitted	2016-10-27 00:00:00
Date Available	2016-10-28 00:00:00
Creation Date	2016-07-29 18:11:46
Producing Software	Adobe Acrobat 7.0 Image Conversion Plug-in
Document Lastmod	2016-08-22 11:11:16
Document Title	User Manual
Document Creator	Adobe Acrobat 7.0

m® 1‘“
Xli'flllli’illlflZ'lli’flWIJ’Z'G/W(i
erHANNEL PRESSllRE uovsme Nzlcnumusmzm REMOTE EDNYROL SVAXIS FLYCOPYER
b USER MANUAL
OPERATING STANDARDS: GB/T26701-2011
MAIN FEATURES
- utilises the 4-axis structure, enabling the aircraft to be even more
flexible, speedy,and possessing a relatively stronger wind-withstanding
capability. Also it can conduct flights in interior as well as exterior
environment.
I A 6-axis gyro direction stabiliser is built-in, ensuring precise positioning
in the air.
a The structure uses modular designs, making installation simple and
repair and maintenance easier.
0 Capable of 360° SD overturning function and fling-flying function.
- Headless function is enabling the aircraft to be summoned back with ease.
0 Brand new pressure hovering height-adjustment function.
The content, specifications or accessory packaging of internal products
in this user manual is strictly for reference only. Our company will not be
responsible for errors in the primed contents and it will not be able to
proactively notify the consumers. For any updates or errors, please abide
by the SYMA MODEL AIRCRAFT’S website as accurate.
Safety guide
1. Please store the smaller-sized aircraft accessories in places that are
out of reach of children, in order to avoid the occurrence of accidents.
2. This aircraft is very powerful. For all first-time flight, it shall be
observed that the left gear shift joystick must be slowly pushed in
order to prevent the aircraft from ascending too quickly and result in
unnecessary collision and damages.
3. When the flight is ended, the power supply of the remote control shall
be switched off firstly, and then, followed by the switching off of the
power supply of the aircraft.
4. Avoid placing the batteries in places with high temperatures and
exposure to heat (for example, naked light or electrical equipment
installations).
5. Take extra precaution to ensure that the aircraft is at a distance of 2 to
3 metres from the user or other people in order to prevent the aircraft
from colliding into the head, face or body, etc. of other people during
landing.
6. When young children are operating the aircraft, it shall be ensured that
the adults are guiding and making sure that the aircraft control is
within the viewing range of the controller (or instructor) such that it
makes the control very convenient.
7. Non-rechargeable batteries are prohibited for recharging. When
installing or changing the batteries, please take extra care on the
polarities of the batteries; 9 new and old batteries or different
types of batteries are strictly disallowed.
8. When the aircraft is not in use, please switch off the power supplies
of both the aircraft and the remote control, and remove the batteries
in the remote control.
9. The terminals 8 power supply cannot be short-circuited.
10.Product operating temperature of 35 °.
.1.
Repair and maintenance
1. Always use dry and soft cloth to clean this product.
2. Avoid this product to be exposed to sunlight or heat.
3‘ Avoid immersing these toys into water, otherwise ,the electronic
pans may be damaged.
4t Regularly Check and inspect the plug and other accessories. It any
damages are discovered, please immediately stop using it, until it is
completely repaired in good working condition.
Package description
The following items can be found in this product package:
- Aircralt - WiFi camera
- Remote Control - Moblle Phone Retaining cup
- Main Blade . Screws (2: nos.)
- Instruction Manual . Foot Stand
- Screwdriver . lron shaft
- Protectlon Gear . Blade locksiiich
- Charge box . card Reader
- Battery . Memory card I \
Understanding your remote control
Remote control’s button function description:
High-Low Speed switch] Antenna
Headless Function
Toggle Button
Light indicator
. Overturning Button
Left Joysllck
(Ascendingl
Descending/Lem
Right Turn)
Rightjoyslick
(Forward/Backward!
Lelegnt Side Flylng)
Front and Back
Fine-Tuning Button
Left/Right Side
Flying Fine-Tuning
Button/Mode
Toggle Button
Left/Right Turn
Fine-Tuning Button
Power Supply
Switch
Battery installation for remote control:
A x AA Batteries
11! I. u
ggi? ALL my
I II IIILf-1
1. Battery Installation Method: Open up the battery cover at the back of
the remote control. Correctly place 4 x AA alkaline batteries in the
battery box in strict adherence to the polarity instructions (the
batteries are optional).
1, During the battery installation, it must be ensured
that the polarities of the batteries are matched with
that of the battery box. No battery shall be installed
A with the opposite polarity,
2. Please do not use new and old batteries together.
3‘ Please do not use different types of batteries
togethert
Remote control button and led
display functions description
Yl'iuI W“ 3;
H :
1. Fine-tuning of left and right side flying: After switching on the remote
control, it is displayed at the middle point.
2. Fine-tuning of fonlvard and back: After switching on the remote
control, it is displayed at the middle point.
3. Fine-tuning of left and right turning: After switching on the remote
control, it is displayed at the middle point.
4. Accelerator Display: After frequency-matching, it is displayed at the
middle point.
5. Forward Display: When the right joystick is pushed forward, it will be
gradually ascended; the forward speed of the aircraft will be gradually
increased.
6. Backward Display: When the right joystick is pushed backward, it will
be gradually ascended; the backward speed of the aircraft will be
gradually increased.
7. Left side Flying Display: When the right joystick is pushed to the left,
it will be gradually ascended; the left side flying speed of the aircraft
will be gradually increased.
8. Right Side Flying Display: When the right joystick is pushed to the
right, it will be gradually ascended; the right side flying speed of the
aircraft will be gradually increased.
9. Left Turning Display: When the left joystick is pushed to the left, it
will be gradually ascended; the left turning speed of the aircraft will be
gradually increased.
10. Right Turning Display: When the left joystick is pushed to the right,
it will be gradually ascended; the right turning speed of the aircraft
will be gradually increased.
11. Fast-Slow Gear Display: Press against Button A can enable the
aircraft to execute the toggle of fast-slow gear. The fast gear is H,
while the slow gear is L.
12. Power Supply Display: Display the current power capacity of the
remote control.
13. Mode Display: The default is MODE1 upon starting up. Push the
Button B to the right and switch on the power supply switch at the
same time can toggle to MODE2.
14. Signal Display: Display the strong and weak signals.
4.
Installation steps of quadcopter’s safety guard
Flgure 1 Flgure 2 Figure 3
1‘ Pull out decorating 2. Insert guard circle 3. Twist two screws of
parts as shown in into the fuselage every parts as
figure (1). interface as shown shown in figure (3),
in figure (2).
Installation steps of quadcopter’s stands
Figure 1 Figure 2
1.Insert stands into the 2.Twist the wide screws
quadcopter body as to locking the stands as
figure“ ). figure(2).
1. Align the mobile phone retaining clip
with the antenna of the remote control
and insert it in.
" 2. Use strength to press against the spring
,1? - section of the retaining clip to adjust the
7 size.
3. Hold tight to the mobile phone retaining
clip and pull upwards with sufficient force
to remove the mobile phone retaining clip.
Wifi real-time transmission aerial
photo-taking component instal a ion
1. Download the installation software:
For Androtd mobile phones, please kindly (vrsrt www.symatoys.net) or scan the QR
code to download the SYMA FPV installation sottware.
For Apple mobile phones. please kindly proceed to APP STORE to download the
SYMA va installation soitware or scan the on code to download the SYMA rpv
installation sortware.
2. Connection description:
Connect model power supply. The FPV light indicator is green and will become red
hlin ng light after approx ately 20 seconds, aw
phone. At this moment, click on “Settings" optio mobile phone and activate
WIFI. in the WlFl's search column. look ior "va WIFI connection, and click
on connection until the message “has been connected" is shown. which indictes that
the connection is successlul. Now, exit the “Settings" option. Open up the SYMA
FPV software. and click the "START" icon to enter into the control panel. The
mobile phone screen has entered into the real-time imaging scenarios. The iull
bar olthe WlFl's signal indicates that the current signal is at its strongest.
ng the connection ior mohile
.6.
1. Open up SYMA FPV 2. Click on “START“ icon. 3. The mobile phone
software. screen is displays
with real—time
imaging scenarios.
3. Real-time transmission gui icon description
1. Back
2. WlFl's Signal
3. Checking oi Photos and Videos
4. Video Recording
5. PholoJaking
a. Video Recording Time Display
4. Real-time transmission aerial photo-taking
Photo-Taking and Video Recording: When the WIFI camera is operating in normal
conditions, please click on the photo or Video icon on the real—time transmission
GUI. and immediately you can conduct photo-taking or Vldlo recording. (The completed
iiies ior photo-taking or video recording can be iound in the “Checking oi Photos and
Videos" tiles.)
5. Memory card storage function.
This 72°F WIFI camera has the Human 01 memory card storage. When 7ZUP WIFI
camera has the memory card. mobile phone and memory card will store picturesi
videos Simultaneously. When 720P WIFI camera has no memory card. pictureslcards
are only stored in a mobile phone.
Aircraft operation guidance
In order to satisfy the different
operating habits of the consumers,
this remote control is installed with
two types of different operating
modes, Mode 1 and Mode 2. Upon
starting up. press Button B towards
the right and switch on the power
supply of the remote control
simultaneously can toggle between
Mode 1 and Mode 2.
Aircraft controlling diagram (mode 1
and default mode upon start-up)
Operating direction
Ascending and descendlng control Forward and backward control
when the left joystick (Accelerator) is when the rightjoyslick (Turning Rudder)
pushed upwards or downwards,the is pushed upwards or downwards, the
aircraft will ascend or descend aircraft will advance forward or backward
correspondingly. correspondingly.
Let! turning and right turning control Mside flying and right side flying control
When the len joystick (Accelerator) is When me right joystick (Turning Rudder)
pushed towards the left or right. the is pushed towards the lelt or right. the
aircrafl will turn lelt or right
correspondingly.
Fine-tuning operation
aircrafl will fly sidewlrd on the left or
right correspondingly.
Forward and backward tine-tuning control
When the alrcratt ls hoverlng in the all, in the event
that the alrcratt ls automatlcally advancing tomato
or backward. It can be rectified by pressing downwards
or upwards the line-tuning button correspondingly.
when the aircraft is hovering in the air, in the event
that the aircraft is automatically flying sideward on
the left or right. it can be rectified by pressing right
or lett oil the line~tuning button correspondingly.
When the aircraft is hovering in the air, in the event
that the aircraft is automatimlly turning lelt or right,
it can be recti led by pressing right or left on the fine.
tuning hunon correspondingly.
Aircraft controlling diagram (mode 2)
Operating direction
When the lelt loyslick (Accelerator) l5
pushed upwards or downwards.the
aircraft will ascend or descend
correspondingly.
When the right joystick (Turning Rudder)
is pushed upwards or downwards. the
aircralt will advance lorward or backward
correspondingly.
When the right Joyslick (Turning Rudder)
is pushed towards the left or right. the
aircraft will lurn left or right
correspondingly.
Fine-tuning operation
When (he airclafl i5 hover
When the left Joyslick (Accelerator) is
pushed towards the left or right, the
aircralt will fly sidewam on the left or
right correspondingly.
n (he ail. in [he even!
that the aircralt is automa ally advancing forward
or hackward. it can he rec ed by pressing downwards
or upwards the fine»luning button correspondingly.
When the aircraft is hovering in the air, in the event that
the aircraft is automatically llying sideward towards the
left or right, it can be rectified by pressing right or left on
the tine-tuning button correspondingly.
When the aircraft is hovering in the air. in the event that
the aircraft is automatically turning net: or right. it can be
rectified by pressing right or left on the fine-tuning button
correspondingly,
Flight preparation and switching
off of the aircraft
I. Flight preparation
Step 1: Open up the Step 2. Open battery step 3. Enclose battery
power supply switch cover, and connect into the fuselage, after
of the remote control. battery connector closing battery cover,
with dash receiver. turn on the switch on
the bottom of aircraft
Step 4: Push the left lever (accelerator) to the
highest point and then reset to the lowest point.
When the indicator lights in the aircraft change
from quick flashing to the continuous lighting,
it means that the aircraft goes into the flight
standby mode.
.11..
II. Switching on the aircraft
Method 1: push the left lever (accelerator) to
the highest point and then reset to the center,
the ventilation blade at aircraft starts rotating
slowly.
Method 2: Move the left and right joysticks
inwards in an internal loop of “8" for 1 second,
the ventilation blade of aircraft starts rotating
slowly.
Method 1: Push the left joystick (Accelerator) to
the lowest level and stay there for 2 to 3
seconds, the aircraft can then be switched off.
Method 2: Move the left and right joysticks
inwards in an internal loop of "8" for 1 second,
and the aircraft can be switched off.
Product features
I. Low-voltage protection:
When the four indicator lights at the bottom of aircratt
start flicking, it means that the aircraft's battery power
is low. At this time, the aircraft will initiate the height» ,
limiting tunction and will drop to certain safety height.
.12.
l|. Overcurrent protection:
When the aircraft encounters direct impact from foreign
object or is stuck under the circumstances in which i
blades are rotating, the electric circuit of the aircraft Will
enter into the overcurrent protection mode.
Level calibration function:
Place the aircraft on a levelling surface and at the same
time, push both left and right joysticks to the lower right
corners and slay there for Z to 3 seconds: the normal
light indicator on the aircraft will blink rapidly, and it will
return back to the normal status after about 2 to 3
seconds. The level calibration is successful,
IV. 3D overturning function:
When you are familiar with the basic actions, you
can proceed to explore even more exciting and risky
overturning actions. Fly the aircraft to a height of above
5 m from the ground, press against the upper right corner
button (overturning Button) on the remote control and
simultaneously push the right joystick to the highest level of
FrontiBack/Lefthlght. the aircraft wtll now he executing the
FrontiBaclt/Lefthight overturning function,
Note When the batteries are fully charge it erI havet best overturning elte
V. Pressure hovering height adjustment function:
After using the left joystick (Accelerator) to
control the ascending I descending flight of the
aircraft, free up the left joystick (Accelerator) and
the aircraft will still hover at that height which
the joystick is free.
VI. Headless function:
1t Defining forward direction:
1. Open up the power supply switch of the
remote control.
2. After connecting the aircraft to the power supply,
M push the switch to “on" location, and adjust the
m n" specified direction of the aircraft's head under the
k "4 headless mode as the new forward direction.
3. Push the accelerator joystick of the remote control
to the highest level and the", pull back into the lowest
level. When the remote control issues a long beep
sound. it means the lrequency and defining lorward
direction functions are completed.
2. Toggling between headless lunction and normal tunction:
1. When the aircraft has completed matching of
lrequency. the default or the aircraft is normal mode.
At this time. the light indicator on the 'rcratt is in
the long blinking mode. When pressing and holding
on to the left upper comer of the headless function
toggle button for 2 seconds. the remote control will
issue a " Di. . sound in 9 it has
entered into the headless mode. In subsequent long pressing on the same button
lot 2 seconds. upon hearing a long “Di" sound. the aircraft has exited lrom the
headless mode. In the headless mode, the four lights on the aircraft is slowly
blinking. Every blink is within 4 seconds)
2. Under the headless mode. the operator does not
require to dilterentiate the head position otthe
aircraft, and he just needs to control the aircralt
using thejoystick‘s direction at the remote control.
3. Rectification for the defining lorward direction function:
1. When the aircraft encounters a direct impact with foreign
objects in the headless mode. if there is an occurrence of
deviation oi the defined direction, it IS only required to
push the accelerator and the dire n joystick to the left
bottom corners simultaneously after rectifying the flying
direction of the aircraft in the correction direction. When
the light indicator of the aircraft is n a long "on" mode
after slowly blinking for; seconds 'ndicates the
rectification is complete.
.14.
Battery rep cement and char 9 method
Steps of battery replacement:
1. Tum of! aircraft's 2. Open aircraft's 3. Connect battery 4, After battery
power supply, battery cover intertace with replacement.
and push the backward. dash receiver. lasten the
switch to "OFF". battery cover
steps of battery charge: again
1. Connect battery 2. Connect charger to
switch with charger. power supply socket.
Balanced charger:
1. Insert adapter's DC outlet into import socket oi balanced charger. Red light oi balanced
charger wlll light on.
2. Insert three—position balanced plug oi power battery to output end oi charger. Green
light oi balanced charger wlll light on, When green light extinguishes. it means the
end oi battery charging. (Chargtng time is less than 200 minutes)
Note: it power battery inserts into the charger. the light has no change it indicates
that this battery is lull energy. There is no need to recharge.
The charging time is less than 200 minutes; In hover flight
conditions longer than 9 minutes!
Cautions when charging:
. When charging, please put this product on a dried or ventilated area and keep it tar
away trom heat source or explosive product.
. When charging, please remove the batteries irorn the quadcopter. Then charging
process should be supervised by an adult so as not to cause an accident.
. When tinish llying, please do not charge the battery it the surlace temperature is still
not cool. Otherwise it may cause a swollen battery or even a tire hazard.
. Please make sure that you use the original use charging cable provided. When the
battery has been used tor a longtime. or appears to be swollen, please replace them.
. it battery when not in use tor a long time will lose its charge automatically. Charging or
discharging too otten may reduce the life oithe battery.
.15.
- Rlsk ol explosion it battery is replaced by an incorrect type.nispose ot used batteries
according to the instructions
- The lollowing instructions were NOT marked.
- Rechargeable batteries are to be removed trom the toy belore being charged.
Rechargeable batteries are only to be charged under adult supervision.
. Exhausted batteries are to be removed trom the toy.
- Transtormers used with the toy are to be regularly examined tor damage to the cord.
plug,enclosure and other parts.and that.in the event olsuch damage.the toys must not
be used with this translormer until the damage has been repaired.
. Warning! The toy is to be assembled by an adult.
. Rechargeable batteries are to be removed train the toy belore being charged i
. Rechargeable batteries are only to be charged under adult supervision.
. Exhausted batteries are to be removed train the toy.
. Atter the battery cover at remote controller is opened by the tool (screw driver). 4 AA
batteries are correctly installed according to the positive and negative electrode. Then. the
battery cover is closed. Finally. the screw driver is used to screw down the battery cover.
The aircratt should be connected with znnomAh and 7.4V lithium battery alter the battery
cover is opened manually. Then, the battery cover is closed manually.
23-
Figure 1 Figure 2 Figure 3
Install camera
Installation camera steps :
1, Figure (1) shows the memory card into the slot on the back ol the camera.
2.Fush the camera and tight it as ligure (2).
3.t:onnect the camera power line into the socket on guadcopter body as ligure (a).
Disassembly camera steps:
Figure 1 Figure 2 Figure 4
-16-
1, Full out power supply cable oi the camera as shown in Figure (no
2, Press down sale lock or lower main body as shown in Figure (zle
3, Push lorward the camera and take it out as shown In Figure (ale
4, Figure (4) shows the memory card them the camera pull the head.
Steps of fan blade’s installation]
disassembly of aircraft
Steps of fan blade’s disassembly:
‘~‘FWE
Figure 1
1. Rotate and back
out lan blade cover
|n anti-clockwlse
direction as shown
in ligure (1).
Figure 2
Z, Rotate blade
Iockstitch tor
about 90' in the
anti—clockmse as
ligure(Z) till the
iron shall point lo
the opening or
blade lockstitch.
Figure 3
3. Get iron shalt out
and pull blade
Iockslltch upward
as ligure (3) shows
Figure 4
4. Pull out tan blade
upward as shown
in figure (A).
Installation steps of tan blade:
Figure 2
Figure 1 Figure 4
Figure 3
1. Insert fan blade 1 Install the blade 3. Install the iron shaft 4t Rotate and twist [an
into principal axis
pipe as shown in
figure (1)
lockstitch inside
the quill as figure
(2) shows to
ensure that the
gap oi blade
lockstitch aligns
at the hole on the
quill.
inside and rotate
blade lockstitch (or
about ninety degrees
in the clockwise
direction shown in
ligure (a).
blade cover in
clockwise direction
as shown in
figure (A).
.17.
Rect ication procedures
Problem Reason
Solution
1.1112 aircraft has entered into
lowvoltage protection.
The aircraft 2. When the power 0' the remote
has no control is weak. the power light
response indicator will blink,
3. The channel selection or the
remote control does not match
with the aircraft's coding.
1. The power at the remote
control is weak‘
2. There is an lnter'erenee with
the same lrequency as that or
the remote controL
The ilight
response oi
the aircraft is
not Sensmve
1. Charge up the aircraft.
2. Change the batteries of
the remote control.
3, Adjust the channel or
both the remote control
and aircraft such that
they are in synchronized
model
t. Change the batteries.
2. Change to a place where
there is no interlerence
with the same frequency.
The aircraft is
flying towards
its side in one
direction during
hovering
1. The aircrart is not calibrated
level to the ground.
to Re-adjust the calibration
until the aircrait is level
to the ground. For lurther
details. please reler to
Point ill at Page 13 (Level
Calibration Function).
in the headless
state, it is biased 1. Many collisions may cause
towards the lront
direction
head biasness.
1. Re-deline the trout
direction. For lurther
details. please kindly
reier to Point VI 01
Page 13 and 14
(Headless Function).
.18.
Accessories (Optional)
You can choose your favourite optional accessories as below. In order
to make it easier for the customers to choose and purchase, we have
specially offered each and every accessory. The accessories can be
purchased through the local distributors. Please kindly specify the
colours during your purchase.
XBHW-M
Upper body
(Golden)
XSHW-DZ
Lowe r body
(Golden)
X8HW-03
Base stand
(Black)
XEHW-M
Protective gear
(Black)
u..—
u.“
XGHWJIS
Rotating blades
(Black)
XBHW-OE
Reversing blades
(Black)
X8HW~D7
Ornament part
(Black)
XBHW-Dfi
Protective gear
X8HW-09
Motor A
(Red and
blue lines)
X8HW»13
Blade lockstitch
M}
\o
XEHW-10
Motor 3
(Black and
white lines)
XRHW-M
Base of dash
receiver
XBHW-11
Main stand
X8HW—1 5
Moter holder
(Golden)
(“MW
XEHW-1 2
Blade cover
XEHW-1 6
Battery cover
(Golden)
XEHW-17
Receiver board
;-
xan—1s
Banery
Iii
xanwns
cnarge box
XBHW-ZD
Lamp cover
X8HW-21
Remote control
XEHW-ZS
Moblie phone
retaining cllp
XEHW-ZZ
camera
Product descriptions
\‘H
X8NW-23
Iron shalt
X8HW-24
card reader
Dnsaiplicm
Blade cover Recelver board I
Blade lockslItCh MaIn Stand BaIIery
Reversrng blades Reversrng mqur I7 Baggage?“
RotalIng blades ] Rolallng motor Lower body
Upper body | MoIor cover Battery Cover
WIFI camera
no
ProIecung frames ] nght boards
Ornament pan LandIng SkIdS
\Io-mbwrx)‘
Main specifications
500mm
190mm
K—N
500mm 500mm
Aircraft’s Length:500mm Aircraft’s Width:500mm
Aircraft’s Heightz190mm Motor’s Model: 132
Battery: 7.4VI2000mAh II hium battery
F§>§9
SPECIFICATIONS AND COLORS OF CONTENTS MAY VARY FROM PHOTO
.21.
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Pan 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates. uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
(4) Consult the dealer or an experienced radioITV technician for help.
This device must not be collocated or operating in conjunction with any
other antenna or transmitter."
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions :
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
‘22.
ThisdevicecomplieswithIndustrycanada Iicence-exemptRSS standard(s).
Operation is subject to the following two conditions:
(1)this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to
other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
Conformément a la réglementation d'Industrie Canada, Ie présent émetteur
radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou
inf érieur) approuvé pour I'émetteur par lndustrie Canada. Dans Ie but de
réduire Ies risques de brouillage radioélectrique a l'intention des autres
utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la
puissance isotrope rayonn ée équivalente (p.irr.er)ne depassepas l'intensité
nécessaire a l‘établissement d'une communication satisfaisante.
Le present appareil est conforme aux CNR d'lndustrie Canada applicables
aux appareils radio exempts de licence. L‘exploitation est autorisé e aux
deux conditions suivantes :
(1} l'appareil ne doit pas produire de brouillage, et
(2) I'u ' isateur de l'appareil doit accepter tout brouillage radioélectrique
subi, méme si le brouillage est susceptible d'en compromettre le
tonctionnement.
.23.
Two-dimension code Two—dimension code
of Android system of iphone IOS system
The company has the right of final interpretation
of this instruction manual statement.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : 3.1-701
Modify Date                     : 2016:08:22 11:11:16+08:00
Create Date                     : 2016:07:29 18:11:46+08:00
Metadata Date                   : 2016:08:22 11:11:16+08:00
Creator Tool                    : Adobe Acrobat 7.0
Format                          : application/pdf
Document ID                     : uuid:f4665887-7419-41b0-9d65-8bbac189b49d
Instance ID                     : uuid:a46dfe92-c504-4552-a36b-84391517c020
Producer                        : Adobe Acrobat 7.0 Image Conversion Plug-in
Page Count                      : 25
Creator                         : Adobe Acrobat 7.0

EXIF Metadata provided by EXIF.tools