SYMA MODEL AIRCRAFT SYMA20160607 R/C Toys User Manual
SYMA MODEL AIRCRAFT INDUSTRIAL CO.,LTD R/C Toys
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3111622 |
| Application ID | GIE0133Zlj6C63blji8hsA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | Yes |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 239.64kB (2995530 bits) |
| Date Submitted | 2016-08-25 00:00:00 |
| Date Available | 2016-08-25 00:00:00 |
| Creation Date | 2016-08-19 18:02:53 |
| Producing Software | Adobe Acrobat 10.1.1 Image Conversion Plug-in |
| Document Lastmod | 2016-08-19 18:02:53 |
| Document Title | User Manual |
| Document Creator | Adobe Acrobat 10.1.1 |
fllfllll/flfl'flllflfllilflll
5llw- is;
AVCHANNEL PRESSURE HOVERING HEIGNFADJUSYMENY REMOTE CONYRDL arms FLVCOPTER
(39
E; USER MANUAL
OPERATING STANDARDS GB/T26701-2011
MAIN FEATURES
- Utilises the 4-axis structure, enabling the aircraft to he even more
flexible, speedy,and possessing a relatively stronger wind-withstanding
capability. Also it can conduct flights in interior as well as exterior
environment.
0 A 6-axis gyro direction stabiliser is built-in, ensuring precise positioning
in the air.
a The structure uses modular designs, making installation simple and
repair and maintenance easier.
0 Capable of 360° 30 overturning function and fling-flying function.
0 Headless function is enabling the aircraft to be summoned back with ease.
0 Brand new pressure hovering height-adjustment function.
The content, specifications or accessory packaging of internal products
in this user manual is strictly for reference only. Our company will not be
responsible for errors in the printed contents and it will not be able to
proactively notify the consumers. For any updates or errors, please abide
by the SYMA MODEL AIRCRAFT’s website as accurate.
Safety guide
1. Please store the smaller-sized aircraft accessories in places that are
out of reach of children, in order to avoid the occurrence of accidents.
2. This aircraft is very powerful. For all first-time flight, it shall be
observed that the left gear shift joystick must be slowly pushed in
order to prevent the aircraft from ascending too quickly and result in
unnecessary collision and damages.
3. When the flight is ended, the power supply of the remote control shall
be switched off firstly, and then, followed by the switching off of the
power supply of the aircraft.
4. Avoid placing the batteries in places with high temperatures and
exposure to heat (for example, naked light or electrical equipment
installations).
5. Take extra precaution to ensure that the aircraft is at a distance of 2 to
3 metres from the user or other people in order to prevent the aircraft
from colliding into the head, lace or body, etc. of other people during
landing.
6. When young children are operating the aircraft, it shall be ensured that
the adults are guiding and making sure that the aircraft control is
within the viewing range of the controller (or instructor) such that it
makes the control very convenient.
1. Non-rechargeable batteries are prohibited for recharging. When
installing or changing the batteries, please take extra care on the
polarities of the batteries; mixing new and old batteries or different
types of batteries are strictly disallowed.
8. When the aircraft is not in use, please switch off the power supplies
of both the aircraft and the remote control, and remove the batteries
in the remote control.
9. The terminals 8 power supply cannot be short-circuited.
10.Product operating temperature of 35°.
.1.
Repair and maintenance
1. Always use dry and soft cloth to clean this product.
2. Avoid this product to be exposed to sunlight or heat.
3. Avoid immersing these toys into water, othenuise ,the electronic
parts may be damaged.
4. Regularly Check and inspect the plug and other accessories. If any
damages are discovered, please immediately stop using it, until it is
completely repaired in good working condition,
Package description
The following items can be found in this product package:
' Aircraft ‘ WiFl Camera
' Remote Control ‘ Mobile Phone Retaining Clip
' Main Blade ‘ Screws (4 nos.)
' Instruction Manual ‘ Foot Stand
' Screwdriver ‘ USB Cable
' Protection Gear
Understanding your remote control
Remote control’s button function description:
High-Low Speed Switch! Antenna
Headless Function
Toggle Button Light Indicator
avenurning Button
Left Joystick
(Ascending!
Descending/Left]
Right Turn)
Right joystick
(Forward/Backward]
Len/Right Slde Flying)
Front and Back
Fine-Tuning Button
Len/Right Side
Flying Fine-Timing
Button/Mode
Toggle Button
LefllRight Turn
FineJuning Button
Power Supply
Switch LCD Screen
Battery installation for remote control:
Battery cover
4 X AA Ballerles
1. Battery Installation Method: Open up the battery cover at the back of
the remote control. Correctly place 4 x AA alkaline batteries in the
battery box in strict adherence to the polarity instructions (the
batteries are optional}.
1. During the battery installation, it must be ensured
that the polarities of the batteries are matched with
that ol the battery box. No battery shall be installed
with the opposite polarity
2 Please do not use new and old batteries together‘
3. Please do not use different types of batteries
together.
Remote contr button and cd
d sp ay funct ons descr pt on
iiiiiiiiiiiiii|iiiiii[liiiiilliiiiii||iiiiiilliHHIWHHIIHHHIIW
.3.
1. Fine-tuning of left and right side flying: After switching on the remote
control, it is displayed at the middle point.
2. Fine-tuning of forward and back: After switching on the remote
control, it is displayed at the middle point.
3. Fine-tuning of left and right turning: After switching on the remote
control, it is displayed at the middle point.
4. Accelerator Display: After frequency-matching, it is displayed at the
middle point.
5. Forward Display: When the right joystick is pushed forward, it will be
gradually ascended; the fonuard speed of the aircraft will he gradually
increased.
6. Backward Display: When the right joystick is pushed backward, it will
be gradually ascended; the backward speed of the aircraft will be
gradually increased.
1. Left Side Flying Display: When the right joystick is pushed to the left,
it will be gradually ascended; the left side flying speed of the aircraft
will be gradually increased.
8. Right Side Flying Display: When the right joystick is pushed to the
right, it will be gradually ascended; the right side flying speed of the
aircraft will be gradually increased.
9. Left Turning Display: When the leftjoystick is pushed to the left, it
will be gradually ascended; the left turning speed of the aircraft will he
gradually increased.
10. Right Turning Display: When the left joystick is pushed to the right,
it will be gradually ascended; the right turning speed of the aircraft
will be gradually increased.
11. Fast-Slow Gear Display: Press against Button A can enable the
aircraft to execute the toggle of fast-slow gear. The fast gear is H,
while the slow gear is L.
12. Power Supply Display: Display the current power capacity of the
remote control.
13. Mode Display: The default is MODE1 upon starting up. Push the
Button B to the right and switch on the power supply switch at the
same time can toggle to MODEZ.
14. Signal Display: Display the strong and weak signals.
Installation procedures for foot stand
and protective ring of the aircraft
Figure (1) Figure (2) Figure (3)
1. Install the foot 2. Install the protective 3. Tighten the screws
stand into the gear into the main in a clockwise
main body as body as shown in direction as shown
shown in Figure (2). in Figure (3).
Figure (1).
Wifi real-time transmission aerial
photo-taking component installation
Mobile phone retaining clip installation:
! \sr} /
J '5' ,1
.n... ‘ - 'v .o... ‘
Figure (1) Figure (2) Figure (3)
1r Align the mobile 2. Use strength to 3. Hold tight to the
phone retaining press against the mobile phone
clip with the spring section of retaining clip and
antenna of the the retaining clip pull upwards with
remote control to adjust the size, sufficient force to
and insert it in. remove the mobile
phone retaining clip.
real-time transm sion ae
photo-taking component insta a
1. Download the installation software:
ForAndroid moblle phones. please kindly (Vlsil www.symatoys.netl or scan the QR
code to download the SYMA FPV installation software.
For Apple mobile phones, please kindly proceed to APP STORE to download the
SYMA va installation soltware or scan the QR code to download the SYMA va
installation soltware.
2. Connection description:
Connect model power supply. The FPV light indicator is green and will become red
blinking light alter approximately 20 seconds, awaiting the connection lor mobile
phone. Al this moment, click on “Settings“ option in mobile phone and activate
WIFI. in the WlFl‘s search column. look lor "va WIFI connection, and click
on connection until the message “has been connected" is shown. which indictes that
the connection is successlul. Now, exit the “Settings“ option. Open up the SYMA
rpv soltware. and click the “sum" icon to enter into the control panel. The
mobile phone screen has entered into the real.time imaging scenarios. The full
bar ol the WlFl's signal indicates that the current signal is at its strongest.
i5:
1. Open up SYMA FPV 2. click on “START" icon. 3. The mobile phone
software. screen displays
WI"! real-Kline
imaging scenarios.
3. Real-time transmission gui icon description
1. Back
2. WlFl's signal
3. Checking of Photos and videos
4. Video Recording
5. Photo—Taking
6. Video Recording Tlme Display
4. Real-time transmission aerial photo-taking
Photo-Taking and Video Recording: when the WIFI camera is operating in normal
conditions, please click on the photo or video icon on the real-time transmission
GUI, and immedialety you can conduct photo—taking or video recording. (The completed
files for photo-taking or video recording can be found in the “checking or Photos and
Wdeos" files.)
Note: When activating the mobile phone soltware to conduct real-time transmission
operating mode, the flight distance of the aircralt will be shortened by halll
Aircraft operation guidance
In order to satisfy the different operating habits of the
consumers, this remote control is installed with two types
of different operating modes, Mode 1 and Mode 2‘ Upon
starting up, press Button B towards the right and switch on
the power supply of the remote control simultaneously can
toggle between Mode 1 and Mode 2.
Aircraft contro ing diagram (mode 1
and default made upon start-up)
Operating direction
When the left joystick (Accelerator) is When lne rlght )oyslick (Turning Rudder)
pushed upwards or downwardsxhe IS pushed upwards or downwards, the
aircraft will ascend or descend aircraft WI" advance forward or backward
correspondingly. correspondingly.
When the left Joystick (Accelerafor) is When the right Joystick (Turning Rudder)
pushed lowards the left or right. the IS pushed towards the left or right, the
aircraft will turn IE" or right aircraft wlll lly Sideward on the left or
correspondingly. right correspondingly.
Fine-tuning operation
When the aircraft is hovering in me air. in (he evenf
that me aircraft is aufomafically advancing fomard
or backward, it can be recfifled by pressing downwards
or upwards me fine-tuning button correspondingly.
.8.
When the aircraft is hovering in the air, in the event
that the aircraft is automatically flying sideward on
the hell or right. it can be rectified by pressing right
or left on the finemming button correspondingly,
When the ratt is hovering in the air. in the event
that the aircraft is automatically turning lett or right.
it can be rectitied by pressing right or lett on the line.
tuning button correspondingly
Aircraft controlling diagram (mode 2)
Operating direction
When the lelt joystick (Accelerator) is When the right ioystick (Turning Rudder)
pushed upwards or downwardsthe is pushed upwards or downwards. the
aircralt will ascend or descend aircratt will advance forward or backward
correspondingly. correspondingly.
Left turning and right turning control Lift sid- ltylng and right slde flying oontrol
When the rightjoystick (Turning Rudder) When the left joystick (Accelerator) is
is pushed towards the iett or right, the pushed towards the left or right, the
aircratt wlll turn lett or right
correspondingly.
Fine-tuning operation
aircraft will fly sideward on the left or
right correspondingly.
Forward and backward fine-tunlng control
When the aircraft ls hovering In the alr, In the event
that the alrcratt ls automallcally advanclng forward
or backward. It can be rectlfled by pressing downwards
or upwards the flne-tunlng button correspondlngly.
When the alrcratt is hovering in the air. In the event that
the aircratt is automatically llying sideward towards the
lelt or right. it can be rectified by pressing right or left on
the fine-tuning button correspondingry.
when the aircrart is hovering in the air, in the event that
the aircraft is automatically turning lert or right, it can be
rectified by pressing right or tell on the fine-tuning button
correspondingly
.1 o-
Flight preparation and switching
off of the aircraft
I. Flight preparation
Step 1: Open up the Step 2: Slide backwards Step 3: Switch on the
power supply switch the battery cover, and aircraft’s switch at
of the remote control. connect the battery the bottom area.
connector with the
power supply
connection interface.
Step 4: Push the left lever (accelerator) to the
highest point and then reset to the lowest point.
When the indicator lights in the aircraft change
from quick flashing to the continuous lighting,
it means that the aircraft goes into the flight
standby mode.
Method 1: push the left lever (accelerator) to
the highest point and then reset to the center,
the ventilation blade of aircraft starts rotating
slowly.
Method 2: Move the ten and right joysticks
inwards in an internal loop of “8" for 1
second, the ventilation blade of aircraft
starts rotating slowly.
III. Switching off the aircraft
Method 1: Push the left joystick (Accelerator)
to the lowest level and stay there for 2 to 3
seconds, the aircraft can then be switched
oft.
Method 2: Move the left and right joysticks
inwards in an internal loop of “B" for1
second, and the aircraft can be switched
off.
Product features
I. Low-voltage protection:
When the tour indicator lights at the bottom of aircraft
start flicking, it means that the aircraft's battery power
is low. At this time, the alrcratt WI" initiate the height-
Iimltlng tunction and wlll drop to certain saiety helght.
II. Overcurrent protection:
When the aircraft encounters direct impact [mm Voreign
objector is stuck under the circumstances in which ils
blades are rotating, the electric circuit 0' the aircrafl will
enter into the overcurrenl protection mode.
III. Level calibration function:
Place the aircratt on a levelling surlace and at the same
time, push both leh and right loyslicks to lhe lower right
corners and stay there lor 2 lo 3 seconds: the normal
light indicator on the aircrah will blink rapidly. and it will
return back to the normal status atter about 2 to 3
seconds. The level calibration is successlul.
IV. SD overturning function:
When you are lamlllar with the hasrc actions, you
can proceed to explore even more exciting and risky
overturning actions. Fly the aircralt to a height ol
above 3 m train the ground. press against the upper
right corner button (Overturning Button) on the remote
control and simultaneously push the right Joystick to
the highest level ol Front/BacleemRight. the aircraft
will now be executing the Front/BacleemRight
overturning lunclion.
Not When the batteries are lully charge it will have the besl overturning elfecl
V. Pressure hovering height adjustment function:
After using the left joystick (Acceleratorl to
control the ascending I descending llight ol the
aircralt. tree up the lelt joystick (Accelerator) and
the aircraft will still hover at that height when
the joystick is tree.
.13.
VI. Fling»flying action Instructions:
As the aircrall uses Saxis gyro, it
greatly increases the run iacior. Fling
the aircralt outwards or overturning it
upwards with a simultaneous stepping
on the accelerator joystick, the aircraft
can stop in the air in a steady manner.
VII. Headless function:
1. Detining torward direction:
1, Open up the power supply switch of me
remote control.
2. After connecting the aircraft to the power supply.
push the switch to “ON" location. and adjust the
specified direction DI the aircraft's head under the
headless mode as the new forward direction.
3. Push the acoeleratorjoystick of the remote control
to the highest level and then, pull back inlo the lowest
level. when the remote control issues along beep
sound, iI means the Irequency and defining lorward
direction functions are completed.
2,1oggling between headless lunotion and normal lunclion:
1, When the aircralt has completed its matching oi
lrequency. the delault oi the aircralt is normal mode.
At this time. the light indicator on the aircralt is in
the long blinking mode. When pressing and holding
on to the lelt upper corner or the headless lunetion
toggle button lor 2 seconds. the remote control will
issue a “Di Di. Di. .. ' sound indicating it has
entered into the headless mode. In subsequent long pressing on the same hutton
lor 2 seconds. upon hearing a long “DI" sound. the aircralt has exited lroin the
headless mode. In the headless mode. the tour lights on the aircralt is slowly
blinking. Every hlinli is within 4 seconds)
2. Under the headless mode. the operator does not
require to dineientiate the head position olthe
aiicialt. and he just needs to control the aircralt
using the loysllck's direction at the remote control.
3. Rectification for the dellnlng lorward dlrectlon function:
1. When the ailclafl encounters a direct impact with
foreign ohiects in the headless mode. ii there is an
occurrence 0’ dewalion 0' the defined direction, ll Is
only required to push the accelerator and the
direction joystick to the left bottom comers
simultaneously alter reotilying the flying direction or
the aircraft in the correction direction. When the llghl
indicator of the aircraft is in a long "0N" mode after
slowly blinking tor: seconds. it indicates the
rectification is complete.
Battery changing and c arging
methods for aircraft
1. Push the switch button of aircraft to “OFF",
and press against the battery cover and
slide backwards.
.15.
‘ 2. Disconnect the connection joint of the
battery from the connection interface of
the power supply.
3. Connect the power supply line of the battery
with USB, and connect the USB interface
with the computer’s connection port (During
charging, the light indicator will light up; and
the light indicator will go off when it is fully
charged. The completion time for charging
the battery is less than 130 minutes).
4. After changing the batteries, firmly secure
the battery cover again.
The charging time us less than 130 minutes; In hover flight
conditions longer than 7.5 minutes!
Precautions as follows during charging of battery:
-Avoid placing the active batteries in places with direct exposure,
sunlight and high temperatures. For example, naked light or electrical
equipment installations; otherwise it may cause damages or
explosions.
-Avoid immersing the batteries in the water. The batteries shall be
stored in a cool and dry place.
- Avoid dismantling the batteries.
- During the charging oi battery, avoid leaving the charging place.
- Risk of explosion if battery is replaced by an incorrect type.Dispose
of used batteries according to the instructions.
. The following instructions were NOT marked.
- Rechargeable batteries are to be removed from the toy betore being
chargedRechargeable batteries are only to be charged under adult
supervision.
- Exhausted batteries are to be removed from the toy.
-16-
- Transformers used with the toy are to be regularly examined for
damage to the cord,plug,enclosure and other parts,and that,in the
event of such damage,the toys must not be used with this transformer
until the damage has been repaired.
- Warning! The toy is to be assembled by an adult.
- Rechargeable batteries are to be removed from the toy before being
charged .
- Rechargeable batteries are only to be charged under adult supervision .
- Exhausted batteries are to be removed from the toy.
- After the battery cover of remote controller is opened by the tool (screw
driver), 4 AA batteries are correctly installed according to the positive
and negative electrode. Then, the battery cover is closed. Finally, the
screw driver is used to screw down the battery cover. The aircraft should
be connected with SOOmAh and 3.7V lithium battery after the battery cover
is opened manually. Then, the battery cover is closed manually.
Wifi camera installation and dismantling methods
Wifi camera dismantling procedures:
Figure (1) Figure (2)
1. Remove the 3-line plug into the camera connection interiace of the
main body according to Figure (1 ).
2. Use strength to press against the safety catch at the main body and
at the same time, pull the camera backwards according to Figure (2).
Wifi camera installation procedures:
Figure m Figure (2)
.17.
1. When the camera is aligned with the main body’s connector,push
the camera inwards according to Figure (1).
2. Insert the 3»Iine plug into the camera connection interface of the
main body according to Figure (2).
Recttfication procedures
Solution
. The aircratt has entered into 1. Charge up the aircratt.
lowvoltage protection. 2. Change the hatteries oi
The aircraft . When the power or the remote the remote control.
has no control is weak. the power light Adjust the channel or
response indicator will blink. both the remote control
. The channel selection otthe and aircrait such that
remote control does not match they are in synchronized
with the aircraft's coding. mode.
. The power or the remote
control is weak.
. There is an inteflerence with
the same rrequency as that of
the remote control.
.Change the batteries.
.Change to a place where
there IS no inlenerence
with the same rreouency.
The flight
response or
the alrcraft is
not sensitive
.Re-adjust the calibration
until the aircraft is level
. The aircrarl is not calibrated to the ground. For rurther
level to the ground. details, please reler to
Paint III of Page 13 (Level
Calibration Function).
The aircrart is
flying towards
its side in one
direction during
hovering
.Re-detine the tront
direction. For turther
. Many collisions may cause details, please kindly
head hiasness. reier to Point Vll or
Page 14 and 15
(Headless Function).
In the headless
state, It is
biased towards
the iron!
dlrectlon
cessor es (Opt n
You can choose your favourite optional accessories as below. In order
to make it easier for the customers to choose and purchase, we have
specially offered each and every accessory. The accessories can he
purchased through the local distributors. Please kindly specify the
colours during your purchase.
‘ t t t t .- , ,
.. ,
.. ‘ ,
.. ‘ ‘ f l
X5HW-01A X5HW-01B XSHW-OZ X5HW-03A
Main Body Main Body Rotor Blade Base Stand
(White) (Blue) (Black) (Green)
XSHW-UJB X5HW-04A XSHW-04E XSHW—DS
Base Stand Protectlve Protective Gear Mobile Phone
(Black) Gear (Green) (Black) leed Mounllng
K E'” :1:
X5HW-06 X5HW-07 XSHW-OE X5HW-09
Motor A Motor E Light Bar Receiver
(Red and (Black and Board
blue lines) white lines)
xsuw—w xsuw—n X5HW—12 xsnw—taA
Lamp Cover Battery use Cable WIFI Camera (Wmte)
.19.
X5HW-135 X5HW-14
WIFI Camera (Black) Remote Control
Product descriptions
.20.
Producl Name Product Name
10p Mam Rudy cum“ Board
Bottom Mam Bony ump Cnver
Mam Rhnqclockms: mrecuon) ngm Ba!
Pmucnve Gear Gar Box
Eznery Covev
- an“
n Mam MH‘OIIAMI‘ID‘kMSE D'Kcm‘") l.—
Camera
Main specnfications
.( f"
f; / \ {j
— §
O «_,
3 \./
330mm
Aircvaft’s Length1330mm Aircraft’s Width:330mm
Aircraft’s Height:110mm Motor’s Model: 98
Battery: 3.7VI500mAh lithium battery
9;; : E ,
m“ N112
sFEcchnoNs AND COLORS o; comsms MAY VARY FROM wow
.21.
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver:
(3) Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
[4) Consult the dealer or an experienced radio/TV technician for help.
(5) “This device complies with FCC radiation exposure limits set forth for
general population (uncontrolled exposure).
(6) This device must not be collocated or operating in conjunction with any
other antenna or transmitter."
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions :
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
.22.
Thisdevicecomplieswithlndustrycanada licence-exemptRSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interterence to
other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
Conformement a la réglementation d'lndustrie Canada, le present émetteur
radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou
inf érieur) approuvé pour I‘émetteur par Industrie Canada. Dans le but de
réduire les risques de brouillage radioélectrique a l'intention des autres
utilisateurs, il faut choisir Ie type d'antenne et son gain de sorte que la
puissance isotrope rayonn ee equivalente (p e.)ne depassepas l'intensité
nécessaire a l'établissement d'une communication satisfaisante.
Le present appareil est conforme aux CNR d'lndustrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisé e aux
deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) I'utilisateur de I'appareil doit accepter tout brouillage radioelectrique
subi, meme si Ie brouillage est susceptible d'en compromettre le
fonctionnement.
.23.
Two-dimensian code Two-dimension code
of Andmid system of iphone IOS system
The company has the right of final interpretation
of this instruction manual statement.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2016:08:19 18:02:53+08:00 Creator : Adobe Acrobat 10.1.1 Modify Date : 2016:08:19 18:02:53+08:00 Title : XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2016:08:19 18:02:53+08:00 Creator Tool : Adobe Acrobat 10.1.1 Format : application/pdf Document ID : uuid:8ba3faff-fc05-4f08-a7e3-17b2c1bc0d10 Instance ID : uuid:1c886170-0e3d-48bc-9654-15e56593f3a9 Producer : Adobe Acrobat 10.1.1 Image Conversion Plug-in Page Count : 25EXIF Metadata provided by EXIF.tools