SZ DJI TECHNOLOGY CS5501702 CrystalSky (5.5 inch) User Manual
SZ DJI TECHNOLOGY CO., LTD CrystalSky (5.5 inch) Users Manual
Users Manual
CrystalSky User Guide CS785/CS785U/CS550 Disclaimer Congratulations on purchasing your new DJITM product. The information in this document affects your safety and your legal rights and responsibilities. Read this entire document carefully to ensure proper configuration before use. Failure to read and follow instructions and warnings in this document may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity. This document and all other collateral documents are subject to change at the sole discretion of DJI. For up-to-date product information, visit http://www.dji.com and click on the product page for this product. By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. You agree to use this product only for purposes that are proper and in accordance with all applicable laws, rules, and regulations, and all terms, precautions, practices, policies and guidelines DJI has made and may make available. DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. The user shall observe safe and lawful practices including, but not limited to, those set forth in this document. DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as DJI ) and its affiliated companies. Names of products, brands, etc., appearing in this document are trademarks or registered trademarks of their respective owner companies. Warnings 1. Ensure to press the Battery Remove Button before remove the battery. 2. DO NOT attempt to touch the metal terminals on the Power Adapter. 3. Clean the metal terminals with a dry, clean cloth if there is any noticeable buildup of dirt. Introduction CrystalSky is a designed specifically for aerial photography that can display clear image under bright light. Use built-in DJI GO App / DJI GO 4 App to control the gimbal, camera and other features of your flight system. The app also comes with Map, Store a User Center, for configuring your aircraft and sharing your content with friends. In the Box CrystalSky Display Screen ×1 Battery ×2 Charging Hub ×1 SD Card Mounting ×1 Mounting Bracket ×1 Hood ×1 Insulation ×1 Extended Module (Optional) ×1 Parts 1. HDMI Port Output HDMI video signal. 2. USB Port Supported extended device, e.g. U disk. 3/4. Micro SD Card Slot Provide extra storage space for the display device, maximum supporting 128 GB. 5. Micro USB Port Configure parameters and upgrade the aircraft by connecting to the DJI Assistant 2 using the USB OTG cable. 6. Headphone jack 7. Light-sensitive Port Built-in light-sensitive sensor. 8. Type C USB2.0 HS Port 9. Built-in GPS 10. Power Button 11. Custom Button 12. Setting Button 13. Custom Button 14. Playback Button 15. Battery Remove Button 16. Battery Slot CS785/CS785U *Use the CrystalSky CS785 for installation illustration. CS550 Usage Charging the Battery Checking the Battery Level Press the Battery Level Button once to check the battery level, and press again to power off. Low High Charging Install the battery into the standard charging hub, and connect the plug the connector B of the battery charger to the charging hub, then connect the battery charger to a power outlet (100-240V, 50/60Hz). Tips: The charging hub can charge two batteries at the same time. It will take a longer time to charge the Intelligent Flight Battery and remote controller together. Mounting the Battery Put the battery into the Battery Slot, then push it to the end until you hear a click. Note: Ensure to press the Battery Remove Button before remove the battery. Connecting the Display Screen to the Remote Controller Connect the display screen to the remote controller via a Micro USB cable. DJI GO/GO 4 App Press the Power Button until the display screen power on, then enter DJI GO/GO 4 app. Use built-in DJI GO App / DJI GO 4 App to control the gimbal, camera and other features of your flight system. The app also comes with Map, Store a User Center, for configuring your aircraft and sharing your content with friends. Specifications Display Screen CS785/ CS785U CS550 Touch Screen 7.85‘, IPS screen, 5.5‘, IPS screen, supporting multi points touch supporting multi points touch Resolutions 2048×1536 1920×1080 Brightness Highlight version (CS785): 1000 cd/m2 1000 cd/m2 Ultra-bright version (CS785U): 2000 cd/m2 Operating System Android Built-in App DJI GO, DJI GO 4 Storage ROM 64GB+RAM 4GB (CS785) ROM 32GB+RAM 4GB ROM 128GB+RAM 4GB (CS785U) Ports HDMI (Supported 3840×2160 output), Dual SD card slot, USB, Micro USB, Type C USB2.0 HS Network WIFI frequency band: 2.4G, 5G Protocol: 802.11b, 802.11g, 802.11n (HT20), 802.11a Satellite Positioning Module GPS/GLONASS Gyroscope Built-in Compass Built-in Speaker Built-in Light-sensitive Sensor Built-in Microphone Built-in Built-in Battery (CS550) 1000mAh, 3.7 V Operating Temperature -20℃ to 40℃ 4K Decoding Capability H.264: 4K30p, H.265: 4K60p Dimensions (without battery) 208.6×147.8×17 mm 153.76×84.94×19 mm Dimensions (with battery) 208.6×147.8×34.75 mm 153.76×84.94×39.6 mm Battery WB37-4920mAh-7.6V Capacity 4920 mAh Voltage 7.6 V Battery Type LiPo battery Energy 37.39 Wh Max Charging Power 55 W Operating Temperature -20° to 40° C Storage Temperature Less than 3 months: - 28° C to 45° C More than 3 months: less than 28° C Charging Temperature 5° C to 40° C Net Weight Approx. 170 g Dimension 90×45×26 mm Charging Hub WCH2 Input Voltage 17.3 - 26.2V Output Voltage 8.7V@6A, 5V@2A FCC Compliance Notice Any changes or modifications not expressly approved by the party responsible for co plia ce could void the use ’s autho ity to ope ate the e uip e t. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ȍReorient or relocate the receiving antenna. ȍIncrease the separation between the equipment and receiver. ȍConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. ȍConsult the dealer or an experienced radio/TV technician for help. RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. ISEDC RSS Regulatory Statement Thi s device complies with ISEDC license -exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'ISEDC applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouil lage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. ISEDC Radiation Exposure Statement This equipment complies with ISEDC radiation exposure limits set forth for an uncontrolled environment.This transmitter must not be co -located or operating in conjunction with any other antenna or transmitter. Cet appareil est conforme aux limitesd'exposition de rayonnement RF ISEDC établiespour un environnement non contrôlé. Cetémetteur ne doit pas être co-implanté oufonctionner en conjonction avec toute autreantenne ou transmetteur.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 1 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:99950efd-9d7f-11f2-0000-02c7314339d4 Producer : GPL Ghostscript 9.18 Modify Date : 2017:07:10 11:29:35Z Create Date : 2017:07:10 11:29:35Z Creator Tool : UnknownApplication Document ID : uuid:99950efd-9d7f-11f2-0000-02c7314339d4 Format : application/pdf Title : UntitledEXIF Metadata provided by EXIF.tools