SZ DJI TECHNOLOGY GL300E1609 C1 User Manual 5

SZ DJI TECHNOLOGY CO., LTD C1 5

Contents

User Manual Part 3

Remote Controller© 2016 DJI. All Rights Reserved. 37Phantom 4 Pro/Pro+ User ManualStatus LED Alarm Remote Controller Status — Solid Red Chime The remote controller is disconnected from the aircraft. — Solid Green Chime The remote controller is connected to the aircraft. Slow Blinking Red D-D-D...... Remote controller error. / Red and Green/ Red and Yellow Alternate Blinks None HD downlink is disrupted. RTH LED Sound Remote Controller Status — Solid White Chime Aircraft is returning home. Blinking White D . . . Sending Return-to-Home command to the aircraft. Blinking White DD .. .. .. Return-to-Home procedure in progress.The Remote Status Indicator will blink red and sound an alert, when the battery level is critically low. Linking the Remote ControllerThe remote controller is linked to your aircraft before delivery. Linking is only required when using a new SFNPUFDPOUSPMMFSGPSUIFmSTUUJNF'PMMPXUIFTFTUFQTUPMJOLBOFXSFNPUFDPOUSPMMFS1. Turn on the remote controller and connect to the mobile device. Launch the DJI GO app.2. Turn on the Intelligent Flight Battery.3. Enter “Camera” and tap on and then tap “Linking RC” button as shown below. RC Control SettingRC CalibrationStick ModeButton Customization/PU%FGJOFE$$ /PU%FGJOFEDefault stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled. Do not change unless familiar with your new mode.You can customize the C1 and C2 buttons on the back of the RC.Linking RC

Navigation menu