SZ DJI TECHNOLOGY GL300K1801 C1 User Manual APhantom 4 Pro Quick Start GuideV2 0

Download:
Mirror Download [FCC.gov]
Document ID	3808208
Application ID	5GKXUvApLhVRFCpEnzijUg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	441.87kB (5523407 bits)
Date Submitted	2018-04-06 00:00:00
Date Available	2018-05-21 00:00:00
Creation Date	2018-03-27 18:15:45
Producing Software	Adobe PDF library 10.01
Document Lastmod	2018-04-06 13:54:03
Document Title	APhantom 4 Pro+ Quick Start GuideV2.0_复制
Document Creator	Adobe Illustrator CC (Macintosh)

V1.0
Remote Controller
The DJI PHANTOMTM 4 Pro+ V2.0 is a smart prosumer flying camera capable of shooting 4K video at 60 fps and at up
to 100 Mbps, and capturing 20 megapixel stills. 4 directions of obstacle avoidance allow it to intelligently avoid
obstacles during flight. Using TapFlyTM and ActiveTrackTM through the DJI GOTM 4 app, you can fly anywhere visible on
your screen or track a moving subject smoothly and easily with a simple tap. The camera uses a 1-inch CMOS sensor
offering unprecedented clarity, lower noise, and better quality images.
In addition to the above features, improved propulsion system efficiency means aircraft noise is 4dB (60%) lower than
on the Phantom 4 Pro+ V2.0.
The powerful remote controller of the Phantom 4 Pro+ V2.0 has a transmission range extending up to 4.3 mi (7 km)*.
It features physical buttons and dials to control exposure, camera tilt, photo capture, and video recording.
10
1. Power Button
10
Built into the remote controller is DJI's latest long-range transmission technology OCUSYNCTM, providing a live HD
view from the Phantom’s camera directly on the display. Dual frequency support makes the HD video downlink more
stable. OcuSync also allows the Phantom 4 Pro+ V2.0 to be connected to DJI Goggles series products wirelessly,
bringing you a real-time aerial FPV experience.
2. Return-to-Home
13. Gimbal Dial
14. Camera Settings Dial
15. Record Button
(RTH) Button
16. Flight Mode Switch
3. Control Sticks
4. Speaker
17. Shutter Button
11
5. Status LED
18. Intelligent Flight Pause Button
19. C1 and C2 Buttons
6. Battery Level LEDs
7. Power Port
8. Display Screen
9. Sleep/Wake Button
11
V2.0
23. USB Port
12
21. HDMI Port
22. Micro-SD Card Slot
12. Handle Bar
20. Micro USB Port
10. Microphone
11. Antennas
(customizable)
12
19
20
22
21
19
23
13
15
14
16
17
18
Folded
The default flight control is known as Mode 2. The left stick controls the aircraft’s altitude and heading, while the right
stick controls its forward, backward, left and right movements. The gimbal dial controls the camera’s tilt.
1. Gimbal and Camera
9. Motors
3. Micro USB Port
11. Aircraft Status Indicators
2. Downward Vision System*
4. Camera/Linking Status Indicator
6. Forward Vision System
7. Infrared Sensing System*
8. Front LEDs
Gimbal Dial
ck w ard
16
13. Rear Vision System
15. Power Button
Ba
Down
12. Antennas
14. Intelligent Flight Battery
Forward
13
14
15
Right
5. Camera Micro SD Card Slot
Right Stick
UP
Turn Right
and Link Button
10. Propellers
Left Stick
Left
Quick Start Guide
Phantom 4 Pro+ V2.0
Turn Left
V2.0
16. Battery Level Indicators
* The Vision and Infrared Sensing Systems are affected by surrounding conditions. Read the Disclaimer and Safety Guidelines and watch the
tutorials in the DJI GO 4 app or on the official DJI website to learn more.
http://www.dji.com/phantom-4-pro-v2
* The remote controller is able to reach its maximum transmission distance (FCC) in a wide open area with no Electro-Magnetic Interference, and at
an altitude of about 400 feet (120 meters).
www.dji.com
Using Phantom 4 Pro+ V2.0
4. Prepare the Remote Controller
1. Watch the Tutorial Videos
6. Flight
Specifications
●
Before taking off, make sure the Aircraft Status Bar in the DJI GO 4 app
indicates ‘Ready to Go (GPS)’ or ‘Ready to Go (Vision)’ if flying indoors.
Unfold
In the DJI GO 4 App:
Watch the tutorial videos at www.dji.com or in the DJI GO 4 app.
Auto Takeoff
Tutorial Videos
Strong
2. Check the Battery Levels
Low
Battery Level
Low
High
Battery Level
DJI GO 4
App
High
Press once to check the battery level. Press once, then again and hold to turn on/off.
Power on the remote controller and
the aircraft.
Complete first-time setup in
DJI GO 4 and tap GO FLY.
First-time activation requires your DJI account and internet connection.
●
Internet
Press the propeller down
onto the mounting plate and
rotate in the lock direction
until secure.
3. Charge the Batteries
Power Outlet
100 - 240V
Black propeller
rings go on motors
with black dots.
When charging is complete, the battery level indicators will automatically turn off.
Video Recording Modes
Video Storage Bitrate
Supported File Systems
Photo
Video
Supported SD Cards
Operating Temperature
● Remote Controller
Manual Landing
Max Transmission Distance
Operating Temperature
Battery
Left stick down (slowly)
until you touch the ground
OR
Silver propeller
rings go on motors
without black dots.
Combination Stick Command
to start/stop the motors
Left stick up (slowly)
to take off
Rotating propellers can be dangerous. Do not start the motors when
there are people nearby.
● Always keep your hands on the remote controller so long as the motor
is still spinning.
● Stop motor mid-flight: Pull the left stick to the bottom inside corner
while simultaneously pressing the RTH button. Only stop motors
mid-flight in emergency situations when doing so can reduce the risk
of damage or injury. Refer to the user manual for details.
Charge Time:
~2 hr 50 min
●
Check that the propellers are secure
before each flight.
289
.5 m
Vertical: ±0.1 m (With Vision Positioning); ±0.5 m (With GPS Positioning)
Horizontal: ±0.3 m (With Vision Positioning); ±1.5 m (With GPS Positioning)
Operating Voltage
Built-in Display Device
Pitch: -90° to +30°
≤31 mph (50 kph) at 6.6 ft (2 m) above ground
0 - 33 ft (0 - 10 m)
0 - 33 ft (0 - 10 m)
2 - 98 ft (0.7 - 30 m)
Surfaces with clear patterns and adequate lighting (> 15 lux)
0.6 - 23 ft (0.2 - 7 m)
Surface with diffuse reflection material, and reflectivity > 8% (such as wall, trees, humans, etc.)
1’’ CMOS; Effective pixels: 20M
FOV (Field of View) 84°, 8.8 mm (35 mm format equivalent: 24 mm), f/2.8 - f/11, auto focus at 1 m - ∞
Video: 100 - 3200 (Auto); 100 - 6400 (Manual); Photo: 100 - 3200 (Auto); 100 - 12800 (Manual)
8 - 1/2000 s
8 - 1/8000 s
3:2 Aspect Ratio: 5472×3648; 4:3 Aspect Ratio: 4864×3648; 16:9 Aspect Ratio: 5472×3078
Single Shot
Burst Shooting: 3/5/7/10/14 frames
Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7EV Bias
Interval: 2/3/5/7/10/15/30/60 s
H.265
H.264
・C4K: 4096×2160 24/25/30p
・C4K: 4096×2160 24/25/30/48/50/60p
・4K: 3840×2160 24/25/30p
・4K: 3840×2160 24/25/30/48/50/60p
・2.7K: 2720×1530 24/25/30/48/50/60p
・2.7K: 2720×1530 24/25/30/48/50/60p
・FHD: 1920×1080 24/25/30/48/50/60/120p
・FHD: 1920×1080 24/25/30/48/50/60/120p
・HD: 1280×720 24/25/30/48/50/60/120p
・HD: 1280×720 24/25/30/48/50/60/120p
100 Mbps
FAT32 (≤ 32 GB); exFAT (> 32 GB)
JPEG, RAW (DNG), JPEG + RAW
MP4/MOV (AVC/H.264; HEVC/H.265)
Micro SD, Max Capacity: 128 GB. Class 10 or UHS-1 rating required
32° to 104° F (0° to 40° C)
2.4 GHz: 4.3 mi (7 km, FCC); 2.5 mi (4 km, CE); 2.5 mi (4 km, SRRC)
5.8 GHz: 4.3 mi (7 km, FCC); 1.2 mi (2 km, CE); 3.1 mi (5 km, SRRC) (Unobstructed, free of interference)
32° - 104° F (0° - 40° C)
6000 mAh LiPo 2S
）
）
18
1.2 A @ 7.4 V
5.5 inch screen, 1920×1080, 1000 cd/m2
Android system, 4G RAM＋16G ROM
Charger
Voltage
17.4 V
Rated Power
100 W
● Intelligent Flight Battery (PH4-5870mAh-15.2V)
Capacity
5870 mAh
Voltage
15.2 V
Battery Type
LiPo 4S
Energy
89.2 Wh
Net Weight
468 g
Charging Temperature Range
41° to 104° F (5° to 40° C)
Max Charging Power
100 W
●
●
mm
Stop motor mid-flight
It’s important to understand basic flight guidelines, for the safety of both you and those around you.
Don't forget to read the Disclaimer and Safety Guidelines.
Download the user manual for more information:
http://www.dji.com/phantom-4-pro-v2
※ This Quick Start Guide is subject to change without prior notice.
17
2m
132 mm
71 mm
DJI incorporates HDMITM technology.
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
PHANTOM is a trademark of DJI.
Copyright © 2018 DJI All Rights Reserved.
Designed by DJI. Printed in China.
YC.BZ.SS000361.01
●
Charge Time:
~1 hr 20 min
ActiveTrack
Mark an object on your screen to track it
as it moves.
Watch the tutorial in the DJI GO 4 app or on the official DJI website to learn more.
Always set an appropriate RTH altitude before takeoff. When the aircraft is returning to the Home Point, you should
guide it with the control sticks. Refer to the Disclaimer and Safety Guidelines for more details.
Manual Takeoff
Gimbal
Controllable Range
● Vision System
Velocity Range
Altitude Range
Operating Range
Obstacle Sensory Range
Operating Environment
● Infrared Sensing System
Obstacle Sensory Range
Operating Environment
● Camera
Sensor
Lens
ISO Range
Mechanical Shutter
Electronic Shutter
Max Image Size
Still Photography Modes
9.5
●
Hold a few seconds to
stop the motors
Remove the battery.
Normal
You are in control of the Phantom, with
satellite and Return-to-Home support.
TapFly
●
Return-to-Home (RTH)
Bring the aircraft back to the Home
Point. Tap again to stop the procedure.
Tap on your screen to fly your Phantom
in that direction, avoiding obstacles as it
flies.
Remove the gimbal clamp from
the camera.
The aircraft will land vertically and stop its
motors.
Weak
5. Prepare for Takeoff
Hover Accuracy Range
Auto Landing
The aircraft will take off and hover at
an altitude of 4 feet (1.2 meters).
1375 g
S-mode: 6 m/s; P-mode: 5 m/s
S-mode: 4 m/s; P-mode: 3 m/s
45 mph (72 kph) (S-mode); 36mph (58 kph) (A-mode); 31 mph (50 kph) (P-mode)
19685 ft (6000 m)
Approx. 30 minutes
32° to 104° F ( 0° to 40° C)
28
GPS/GLONASS
196 mm
Ready to Go (GPS)
Aircraft
Weight (Battery & Propellers Included)
Max Ascent Speed
Max Descent Speed
Max Speed
Max Service Ceiling Above Sea Level
Max Flight Time
Operating Temperature
Satellite Positioning Systems
FCC Compliance Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information
Aircraft complies with FCC/ISEDC radiation exposure limits set forth for an uncontrolled environment. In
order to avoid the possibility of exceeding the FCC/ISEDC radio frequency exposure limits, human
proximity to the antenna shall not be less than 20cm during normal operation.
For Remote Controller, SAR tests are conducted using standard operating positions accepted
by the FCC/ ISEDC with the remote controller transmitting at its highest certified power level in all
tested frequency bands, although the SAR is determined at the highest certified power level,
value.
the actual SAR level of the remote controller while operating can be well below the maximum value
Before a new model is a available for sale to the public, it must be tested and certified
to the FCC /ISEDC that it does not exceed the exposure limit established by the FCC/ISEDC,
Tests for each model are performed in positions and locations as required by the FCC /ISEDC.
For body worn operation, this device has been tested and meets the FCC /ISEDC RF exposure
guidelines when used with an accessory designated for this product or when used with an
accessory that contains no metal and that positions the handset a minimum of 10 mm from
the body.
For limb worn operation,this device has been tested and meets the FCC/ISEDC RF exposure guidelines
when used with an accessory designated for this product or when used with an accessory that contains
no metal.
ISEDC RSS Warning
This device complies with licence‐exempt RSS standard (s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference,including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'ISEDC applicables aux appareils radio
exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l''appareil ne d
doit pas produire de brouiillage, et
(2) l'utilisateur d
de l'appareill doit acceptter tout bro
ouillage radio
oélectrique subi, même si le
brou
uillage est sussceptible d'en
n comprometttre le fonctio
onnement.
essage
KCC Warning Me
해당무선설비
비는 운용 중 전파혼신 가능성이 있으므로
있
인
인명안전과
관
관련된 서비스는
“해
할 수 없습니다
다.”
“해
해당 무선설비
비는 운용 중 전파혼신 가능성이 있음”
있
C Warning Me
essage
NCC
低功
功率電波輻射
射性電機管理
理辦法
第十
十二條 經型式
式認證合格之
之低功率射頻
頻電機，非經
經許可，公司
司、商號或使
使用者均不得擅自
變更
更頻率、加大
大功率或變更
更原設計之特性及功能。
第十
十四條 低功率
率射頻電機之
之使用不得影
影響飛航安全
全及干擾合法
法通信；經發現
現有干擾現象
象時，
應改
改善至無干擾
擾時方得繼續
續使用。前項合
合法通信，指
指依電信法規
規定作業之無
無線電通信。低功
率射
射頻電機須忍
忍受合法通信
信或工業、科學及醫療用電
電波輻射性電
電機設備之干
干擾。
Statement:
S DJI TECHNOLOGY CO., LTD hereby declares that this device is in
SZ
EU Compliance
com
mpliance with the essential requirements and other relevant provvisions of thee R&TTE Direcctive.
A co
opy of the EU Declaration of
o Conformityy is available online at ww
ww.dji.com/eu
uro‐complian
nce
H, Industrie Sttrasse. 12, 97
7618, Niederllauer, Germany
EU contact
addreess: DJI GmbH

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2018:03:27 18:15:45+08:00
Creator                         : Adobe Illustrator CC (Macintosh)
Modify Date                     : 2018:04:06 13:54:03-07:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2018:04:06 13:54:03-07:00
Creator Tool                    : Adobe Illustrator CC (Macintosh)
Format                          : application/pdf
Title                           : APhantom 4 Pro+ Quick Start GuideV2.0_复制
Document ID                     : uuid:0e7aac52-fffb-4387-ad8d-73a0951926b3
Instance ID                     : uuid:6dcdc3ad-1936-413f-9100-08c910c0b372
Producer                        : Adobe PDF library 10.01
Page Count                      : 4

EXIF Metadata provided by EXIF.tools