SZ DJI TECHNOLOGY WM3251511 Phantom 3 4K User Manual Part II

SZ DJI TECHNOLOGY CO., LTD Phantom 3 4K Part II

Contents

User Manual Part II

© 2015 DJI. All Rights Reserved. 21AircraftPhantom 3 4K User Manual Battery Level Indicators While ChargingLED1 LED2 LED3 LED4 Battery Level 0%~25% 25%~50% 50%~75%75%~100% Fully ChargedBattery Protection LED DisplayThe table below shows battery protection mechanisms and corresponding LED patterns. Battery Level Indicators while ChargingLED1 LED2 LED3 LED4 Blinking Pattern Battery Protection Item LED2 blinks twice per second Over current detected LED2 blinks three times per second Short circuit detected LED3 blinks twice per second Over charge detected LED3 blinks three times per second Over-voltage charger detected LED4 blinks twice per second Charging temperature is too low LED4 blinks three times per second Charging temperature is too high After these issues are resolved, press the Power Button to turn off the Battery Level Indicator. Unplug the Intelligent Flight Battery from the charger and plug it back in to resume charging. Note that you do not need to unplug and plug in the charger in the event of a room temperature error; the charger will resume charging when the temperature is within the allowable range.DJI does not take any responsibility for damage caused by third-party chargers.How to discharge your Intelligent Flight Battery:Slow : Place the Intelligent Flight Battery into the Phantom 3 4K’s Battery Compartment and turn it on. Leave it on until there is less than 8% of power left, or until the battery can no longer be turned on. Launch the DJI GO app to check battery levels.Rapid : Fly the Phantom 3 4K outdoors until there is less than 8% of power left, or until the battery can no longer be turned on.

Navigation menu