Safety Technology 34752 Outdoor Motion Detector, 433.92MHz User Manual
Safety Technology International, Inc. Outdoor Motion Detector, 433.92MHz
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2378564 |
| Application ID | 5++H55k9vmBW6T/wzvva4g== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 36.89kB (461158 bits) |
| Date Submitted | 2014-09-04 00:00:00 |
| Date Available | 2014-09-04 00:00:00 |
| Creation Date | 2014-09-03 13:21:15 |
| Producing Software | Microsoft® Word 2010 |
| Document Lastmod | 2014-09-03 13:22:05 |
| Document Title | User Manual |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | Rick McMurray |
Rhein Tech Laboratories, Inc. 360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com Appendix J: Client: STI Model: STI-34752 Standards: FCC 15.231/IC RSS-210 ID’s: TXL34752/6335A-34752 Report #: 2014089 Manual Please refer to the following pages. 25 of 33 Wireless Outdoor PIR Motion Detector Model STI-34752 Program sensor before installation Description STI-34752 is a high grade professional motion sensor engineered with the world’s best components and materials. Special Dual-Frequency infrared (DFIR™) opto-electronics provide the highest level of false alarm immunity available in a passive infrared motion sensor. The principal of DFIR is simple. A moving object produces two signal frequencies. White light, electromagnetic interference, hot air - stationary changing-temperature objects and other typical false alarm sources produce only one signal frequency. Thus, by rejecting one-frequency signals, the STI-34752 rejects false alarms. The STI-34752 features one sixelement DFIR detection system. Features · 33 ft/10M range and 90 degree field of view (45 degrees to each side). · Mountable on flat-wall or 45 degree corner. · Cover tamper. · Strong, reliable RF signal. · 6-8 year battery life of CR123A battery. · Low battery indication. We protect the things - 1 - that protect you. Sensor Initialization After a 30 second warm-up, the STI-34752 sensor is fully operational. During warm-up, the LED flashes. After warm-up, the sensor starts a three minute walk test mode. Walk Test LED 1. LED lights for 3 minutes when motion sensed (only during walk test). 2. Wireless transmissions are sent for each detection (walk test can be used for receiver test as well). 3. Motion stops (locks out) sensing for 20 seconds after LED flashes. 4. When complete, replace sensor base by snapping back onto unit. NOTE: The STI-34752 should be walk tested once per year. Alarm Processing STI-34752 alarm processing is designed for extreme false alarm rejection. The processing is a quantum leap above standard PIR motion sensors that simply count signal events. The fields of view are set up so moving objects produce two detector signals of different frequencies, while non-moving false alarm sources produce two detector signals of the same frequency. Pet Immunity STI-34752 is designed to allow the presence of pets (100 lbs/45 kg or lighter) without signaling an alarm. It includes a special micro-element lens array that produces much stronger optical signals for humans than for pets 100 lbs/45 kg or lighter. The optical sensitivity of each STI34752 is factory calibrated to ensure accurate discrimination between humans and pets. NOTE: Some pets (especially larger ones with very short hair), even if lighter than 100 lbs/45 kg, may produce enough infrared radiation to cause alarms. STI-34752 users are strongly advised to test the sensor with their own pets, in order to verify that the STI-34752 will not signal an alarm when their pets are moving within its fields of view. The diagram below shows the STI-34752 zones of greatest human/pet discrimination. The STI-34752 should be mounted so pets will occupy only the lighter-colored spaces. 7.5 3.28 10 20 30 40 Operation 1. Motion stops (locks out) transmitting wireless sensor alarms for 3 minutes after sending an alarm transmission. This is to conserve battery life. 2. Walk Test LED does not activate in normal operating mode, only works during walk test. 3. Tamper: when cover is opened. 4. Supervisory: every hour. Programming Instructions 1. Remove base by releasing the snap closure located at the bottom center. 2. Put receiver in program mode (refer to receiver instructions for programming). 3. Remove battery cover and Mylar tab. Unit should immediately program in receiver. If not, press the tamper switch. Snap battery cover back in place. -2- Mounting Instructions 1. Remove the screw knockouts on sensor base for mounting. 2. Mount at 7.5 ft (ideal height) with provided screws and optional anchors. 3. Snap unit back onto sensor base. Unit immediately goes into 3 minute walk test. To reset walk test, remove cover and reattach. NOTES: · Clear line of sight from sensor to monitored area, glass will blocks sensor’s view. · Wall temperature similar to walls/floor of monitored area · Sensor aimed away from windows and reflected sunlight · Sensor aimed away from heaters or heater/cooler outlets · Sensor aimed so intruder path crosses three views. Specifications Mounting Hardware: Mounting Height: Replacement battery: Temperature range: White light immunity: RF Immunity Housing dimensions: Tamper Switch: #6 screw 7.5 ft. (ideal height) CR123A 1500mAH -40° to 131°F (-40° to 55°C) 25000 lux 50 V/m 10-1000 MHz; 20 V/m 1-2 GHz 4.4 x 2.4 x 2” (H x W x D) Form A (NC). 50 mA at 30 VDC Range: 33 ft./10M in sensor-facing direction Sensor Optical View Pattern (side view, in feet) 7.5 3.28 3.28 6.6 9.9 13 16 20 23 26 30 33 Optical Fields-of-View Long-range 88° Mid-range 30° Short-range 18° Look-down 8° Sensor Optical View Pattern (top view, in feet) 26 20 13 6.6 0 6.6 13 20 26 6.6 13 20 26 33 -3- Warranty Information Safety Technology International, Inc. warrants to the original consumer/purchaser what this product shall be free of defects in material and workmanship under normal use and circumstances for a period of one (1) year from the original date of purchase. Electronic warranty form at www.sti-usa.com/wc14. Important Notice This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Model: STI-34752 FCC ID: TXL34752 IC: 6335A-34752 Changes or modifications not expressly approved by Safety Technology International, Inc. could void the user’s authority to operate the equipment. Technical Support Contact STI at 800-888-4784 ext. 202 Additional Wireless Alert Series Products STI-34098 STI-34104 STI-V34104 STI-34108 STI-34188 STI-34101 STI-34151 STI-34201 STI-34301 STI-34401 STI-34501 STI-34601 Single Channel Slave Receiver 4-Channel Receiver 4-Channel Voice Receiver 8-Channel Receiver 8-Zone Relay Board Solar Powered Driveway Monitor Sensor Battery Powered Driveway Monitor Sensor Wireless Mailbox Alert Sensor Wireless Garage Sentry Sensor Wireless Universal Alert Sensor Wireless Entry Alert Sensor Wireless Doorbell Button STI-34701 STI-34752 STI-6200WIR STI-6200WIR4 STI-6400WIR STI-6400WIR4 STI-6517A STI-6517B STI-30104 STI-30105 STI-34105 STI-34106 STI-34109 Indoor Wireless PIR Outdoor Wireless PIR Wireless Fire Extinguisher Theft Stopper Wireless Fire Extinguisher Theft Stopper w/Receiver Wireless Exit Stopper Door Alarm Wireless Exit Stopper Door Alarm with Receiver Stopper Station Shield with Sound Stopper Station Shield with Sound and Transmitter Lamp Controller Extended Antenna Voltamax 12VDC (500mA) Power Supply Keyfob Repeater 2306 Airport Rd • Waterford, MI 48327 Phone: 248-673-9898 • Fax: 248-673-1246 info@sti-usa.com • www.sti-usa.com Safety Technology International (Europe) Ltd. Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999 Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only) E-mail: info@sti-europe.com • Web: www.sti-europe.com Subject to change without notice. Printed in USA -4- Inst. 34752 JUNE2014
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : Rick McMurray Create Date : 2014:09:03 13:21:15-07:00 Modify Date : 2014:09:03 13:22:05-07:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2014:09:03 13:22:05-07:00 Creator Tool : Microsoft® Word 2010 Format : application/pdf Creator : Rick McMurray Document ID : uuid:208feb92-8bc6-49f6-bf30-c3bbe452f902 Instance ID : uuid:6a5c1cc9-25b0-4679-b0fa-c9fc49297076 Producer : Microsoft® Word 2010 Page Count : 5EXIF Metadata provided by EXIF.tools