Sagem Wireless 189033747 BT HEADSET SAGEM H2 User Manual

Sagem Wireless BT HEADSET SAGEM H2 Users Manual

Users Manual

www.tuv.com Test Report No.: 14010504 001 Appendix 4 page 12 of 27 1.5 User Manual (Cover) BT HEADSET SAGEM H2 User Guide
www.tuv.com Test Report No.: 14010504 001 Appendix 4 page 13 of 27 (Page 0) Contents BT HEADSET SAGEM H2……………..………………………………………….2 Getting Started………………..……………..………………………………………3 Charging Your Headset…………………………………………………………….4-5 Nominal Charging Time…………………………………………………………5 Talk & Standby Time………………………………………………………….5 Low Battery……………………………………………………………………...5 Turning Your Headset On and Off…………………………………………………….6 Pairing Your Headset………..………………………………………………………7-8 Using Your Headset………………………………………………………………9-10 Answering a Call…………………………………………………………………9 Ending a Call……………………………………………………………………..9 Rejecting a Call…………………………………………………………………..9 Dialing from Your Mobile Handset……………………………………………...9 Voice Dialing from Your Headset……………………………………………..….9 Last Number Redialing from Your Headset……………………………………..9 Adjusting the Volume………………………………………………………………...10 Resetting / Removing the Pairing …………………………………………………...10 Care and Maintenance……………………………………………………………11-12 Safety Information……………………………………………………………………13 Troubleshooting……………………………………………………...……………….14 Product Specifications………………………………………………………………..15
www.tuv.com Test Report No.: 14010504 001 Appendix 4 page 14 of 27 (Page 1) BT HEADSET SAGEM H2 Fig. 1 Multifunction Button(MFB) Earpiece Volume + / - Dual LED Ear Hook Microphone
www.tuv.com Test Report No.: 14010504 001 Appendix 4 page 15 of 27 Getting Started To use your BT HEADSET SAGEM H2 (“the headset”), please follow these simple steps:  Charge your headset  Pair your headset with a Bluetooth-enabled mobile handset
www.tuv.com Test Report No.: 14010504 001 Appendix 4 page 16 of 27 Page 3 Charging Your Headset Fig. 4 The Headset comes with a built-in rechargeable battery. Prior to using the headset, it is recommendable to charge the battery fully for the first time. Page 5 Charging Your Headset Connect the charger to an AC wall outlet then plug into the Charger Adaptor and then go to the headset’s charging socket (fig.4). The LED will be red while charging. IMPORTANT Charging indication will be delayed for a few seconds if the headset has not been used for a long time or the battery is drained. Nominal Charging Time Charging the battery fully is normally within 3 hours. When the battery is fully charged, the LED will turn blue and remains on for 30 minutes. Disconnect the charger from AC wall outlet and the headset. Press and hold the MFB (fig.1) for 2 seconds to turn the headset on, please refer to “Turning Your Headset On and Off” on the next page. Talk & Standby Time The fully charged battery offers up to 6 hours talk time and up to 150 hours standby time. When no calls are in progress, the headset remains turned on in standby mode. Low Battery When the headset is on and the battery becomes low, the LED flashes red and the headset emits a beep every 1 minute. Please recharge the battery as described above.
www.tuv.com Test Report No.: 14010504 001 Appendix 4 page 17 of 27 Page 6 Turning Your Headset On and Off Turning On the Headset Press and hold the MFB for 2 seconds until you hear a short beep. The LED will flash blue. IMPORTANT Press the MFB again each time you turn on the headset to reactivate pairing so that the connection between the headset and the mobile handset is resumed. For pairing, please refer to “Pairing Your Headset” on page 7-8. Turning Off the Headset Press and hold the MFB for 3 seconds until you hear a long beep. The LED flash stops. IMPORTANT To disconnect the Bluetooth connection, please firstly turn of your headset by pressing the MFB key.
www.tuv.com Test Report No.: 14010504 001 Appendix 4 page 18 of 27 Page 7 Pairing Your Headset Prior to using your Headset for the first time, you must pair it with a Bluetooth-enabled mobile handset. The information on the next page describes pairing instruction for typical Bluetooth-enabled mobile handset. Headset pairing procedure is subject to different models of mobile handsets.
www.tuv.com Test Report No.: 14010504 001 Appendix 4 page 19 of 27 Page 8 Pairing Your Headset 1. Place the headset and the mobile handset where they are easily viewable by no more than 1 meter apart. 2. Ensure the headset is OFF. 3. Press and hold the MFB until the headset LED alternately flashes blue and red. 4. Activate your mobile handset’s Bluetooth function by referring to your mobile handset user guide for details. 5. Set the mobile handset to search for Bluetooth devices within about 1 meter as instructed in the mobile handset user guide and select “BT HEADSET SAGEM H2” from the list. 6. Enter the preprogrammed passkey “0000” and press “OK” to pair your headset and mobile handset. When the pairing is complete, the headset LED will flash blue rapidly for 5 times followed by a long beep. 7. Go back to your mobile handset’s main menu. For certain mobile handset models, a headset icon will be shown on the screen. You should now be able to make and receive calls using your headset. IMPORTANT If the pairing cannot be completed within 2 minutes while the pairing mode is activated, the headset LED flashes purple red with 3 beeps and the headset is turned off. Please repeat Steps 2 to 7 to pair the headset and the mobile handset again.
www.tuv.com Test Report No.: 14010504 001 Appendix 4 page 20 of 27 Page 9 Using Your Headset Answering a Call When there is an incoming call, you will hear ringing through the earphone. Press the MFB to accept the call or answer the call via your mobile handset in the normal way. Answering a Call when Listening to Stereo Audio Press the MFB once to answer the call and when finished, press the MFB once to resume stereo audio. Ending a Call Press the MFB to end your call or end the call via your mobile handset in the normal way. Rejecting a Call To reject an incoming call during ringing of the headset, press and hold the Volume Key for 2 seconds until you hear 2 beeps. Dialing from Your Mobile Handset Simply make calls on your mobile handset in the normal way.
www.tuv.com Test Report No.: 14010504 001 Appendix 4 page 21 of 27 Page 10 Using Your Headset Voice Dialling from Your Headset If your mobile handset is equipped with a voice dialling function, simply press the MFB on your headset and when you hear a beep, say the voice tag. IMPORTANT Please make sure to record voice tag into the mobile handset first before using voice dialling function. Last Number Redialling from Your Headset Press the MFB on your headset twice. IMPORTANT The above functions are only applicable to mobile handsets with Bluetooth Handsfree Profile. Functionality varies depending on the mobile handset model you have. Please refer to your mobile handset user guide for additional information. Resetting / Removing the Pairing You may want to reset the headset to its original settings. This also clears all current pairings. 1. Ensure the headset is OFF. 2. Press and hold the Volume Key until the LED alternately flashes blue and red rapidly. 3. Release the Volume Key. 4. Press and hold the Volume Key again until you hear 2 beeps. 5. Recharge the headset for a few seconds
www.tuv.com Test Report No.: 14010504 001 Appendix 4 page 22 of 27 Page 11 Care and Maintenance Headset  Consider turning your headset off before placing it in your pocket or bag. If the MFB is accidentally depressed, your mobile handset may place an unintended call.  Do not expose the headset to liquid, moisture or humidity as it is not waterproof.  Do not use abrasive cleaning solvents to clean the headset.  Do not expose the headset to extremely high or low temperatures.  Do not dispose of the headset in a fire as it will result in explosion.  Do not expose your headset to contact with sharp objects as this will cause scratches and damage.  Do not stick anything inside the headset as this may damage internal components.  Do not attempt to disassemble the headset as it does not contain serviceable components.  If you do not use the headset for long periods, be sure to store it in a dry place, free from extreme temperatures and dust.
www.tuv.com Test Report No.: 14010504 001 Appendix 4 page 23 of 27 Page 12 Built-in Battery  Do not attempt to replace the headset’s battery yourself as it is in-built and is not changeable.  Charge the battery in accordance with the instruction supplied with this user guide.  Only use the manufacturer supplied charger when charging the headset. Charging  Only use the manufacturer supplied charger when charging the headset.  Do not disassemble the charger as it may expose you to dangerous voltages of other risks. Incorrect reassembly can cause electric shock when the headset is subsequently used.  Do not use the charger outdoors or in damp areas.  Only charge the headset’s built-in battery in accordance with the instructions of this user guide.  Avoid charging the headset in extremely high and low temperatures.
www.tuv.com Test Report No.: 14010504 001 Appendix 4 page 24 of 27 Page 13 Safety Information  Check local laws regarding use of a mobile handset and headset while driving. If you use the headset while driving, ensure your attention and focus remains on your responsibility of driving safely.  Never allow children to play with the headset – small parts may be a choking hazard.  Observe all signs that require an electrical device or RF radio product to be switched off in designated areas. These could include hospitals, blasting areas, and potentially explosive atmospheres.  Turn off your headset prior to boarding an aircraft. Do not use your headset in an aircraft.  Never mount or store your headset over any air bag deployment area as serious injury may result when an air bag deploys.  Do not open or mutilate the built-in battery.  Dispose of batteries according to local regulations. Do not dispose as household waste
www.tuv.com Test Report No.: 14010504 001 Appendix 4 page 25 of 27 Page 14 Troubleshooting If you are unable to connect your headset and mobile handset, please try the following:  Ensure your headset is turned off and is properly charged.  Ensure the headset is paired with your mobile handset.  Ensure your mobile handset’s Bluetooth feature is activated. Please refer to your mobile handset user guide for specific instruction.  Ensure the headset is within a maximum of 10 meters of your mobile handset(s) and there are no obstructions, such as walls or other electronic devices in between. If the above steps do not solve your problem, please recharge the headset and remove your mobile handset battery for a while. If there is no reaction when pressing the buttons, press the Reset Key (fig.1) to return to factory default setting. The headset is turned on again and all pairings are cleared. The i.Tech Clip IIIs Headset is compliant with and adopts the Bluetooth Specification 1.2. However, interoperability between the device and other Bluetooth-enabled products is not guaranteed because it depends on compatibility. For more information on the compatibility between the device with other Bluetooth-enabled products, please check with the manufacturer or browse http://www.itechdynamic.com
www.tuv.com Test Report No.: 14010504 001 Appendix 4 page 26 of 27 Page 15 Product Specifications Bluetooth Specification: Version 1.2 Class 2 Bluetooth Profile Supported: Headset and Hands free Range of Frequency: 2.4GHz Spectrum Dimensions: mm (L) xmm (W) xmm (H) Nominal Charging Time: Within 3 hours Talk Time*: Up to 7 hours Standby Time*: Up to 300 hours Weight: 14.2 grams *may vary due to users’ operation mode and mobile phone settings
www.tuv.com Test Report No.: 14010504 001 Appendix 4 page 27 of 27 (Back Cover) © 2005 Hutchison Harbour Ring Enterprises Limited All rights in this publication are reserved and no part may be reproduced without the prior written permission of the publisher. The contents of this publication are believed to be correct at the time of going to press, but any information, specifications, products or services mentioned may be modified, supplemented or withdrawn without further notice. The Stylized i.Tech logos are trademarks owned by Hutchison Harbour Ring Enterprises Limited or its affiliates. Bluetooth® and the Bluetooth logos are trademarks owned by Bluetooth SIG, Inc, USA and licensed to i.Tech Dynamic Limited. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. i.Tech declares under our sole responsibility that the headset is in conformity with the provisions of the following Council Directives: 1999/5/EC Printed in China

Navigation menu