Sagem Wireless 95E2002P GSM 900/1900 Mobile Phone User Manual MYX 3p EN 00 p65

Sagem Wireless GSM 900/1900 Mobile Phone MYX 3p EN 00 p65

UserManual.wiki >

Sagem Wireless >

95E2002P User Manual

User Manual

2 Conformance DocumentSAGEM SA declare under its sole responsibility thatthe product Dual Band GSM/PCS Type E2002conforms to the requirements of the following EECdirectives:EEC Directive 1999/5/CESafety EN 60950: 2000EMC EN 301 489-1EN 301 489-7Low voltagedirective 73/23/CEENetwork 3GPP TS 51.010-1 v4.8.0TBR 19 Edition 5TBR 20 Edition 3EN 301511 v7.0.1Health EN 50360EN 50361FCC Conformance DocumentFCC Part 24Network NAPRD03.ver 2.6.1Health Draft IEEE Std 1528-200xMYX-3p_EN-00.p65 19/12/2002, 15:222

3Use of your phone is subject to safety rules designedto protect the user and his or her environment.Exposure to Radio Frequency Signals•Your wireless handheld portable phone is a lowpower radio transmitter and receiver. When it is ON, itreceives and also sends out frequency (RF) signals.•In August, 1996, the Federal CommunicationsCommissions (FCC) adopted RF exposure guidelineswith safety levels for handheld wireless phones.Those guidelines are consistent with the safetystandards previously set by both U.S. andinternational standards bodies:ANSI C95.1 (1992)*NCPR Report 86 (1986)*ICNIRP (1996)*(*) American National Standards Institute; NationalCouncil on Radiation Protection and Measurements;International Commission and Non-Ionizing RadiationProtection.•Those standards were based on comprehensive andperiodic evaluations of the relevant scientificliterature. For example, over 120 scientists,engineers, and physicians from universities,government health agencies, and industry reviewedthe available body of research to develop the ANSIStandard (C95.1).•The design of your phone complies with the FCCguidelines (and those standards).Safety Information for Wireless handled phonesMYX-3p_EN-00.p65 19/12/2002, 15:223

4Safety Information for Wireless handled phones•For body worn operation, this phone has been testedand meets FCC RF exposure guidelines when usedwith an accessory that contains no metal and thatpositions the handset a minimum of 1.5 cm from thebody.Use of other accessories may not ensure compliancewith FCC RF exposure guidelines.Phone Operation•Normal position: hold the phone as you would anyother phone with the upper zone (back of the LCDdisplay) pointed up and over your shoulder.•Tips on efficient operation: for your phone to operatemost efficiently: do not touch cover unnecessarily thetop part of the phone with your hand. This wouldcover the integrated antenna and affect call qualityand may cause the phone to operate at a higherpower level than otherwise needed.Driving•Check the laws and regulations on the use ofwireless telephones in the areas where you drive.Always obey them. Also, if using your phone whiledriving while driving please:- Give full attention of driving, driving safely is yourfirst responsibility- Use hands-free operation, if available- Pull off the road and park before making oranswering a call if driving conditions so require.MYX-3p_EN-00.p65 19/12/2002, 15:224

5Safety Information for Wireless handled phonesElectronic Devices•Most modern electronic equipment is shielded fromRF signals. However, certain electronic equipmentmay not be shielded against the RF signals from yourwireless phone.•Some phone accessories allow to reduce theradiation interferences of the phone. Please contactyour distributor.PacemakersThe Health Industry Manufacturers Associationrecommends that a minimum separation of six (6”)inches be maintained between a handheld wirelessphone and a pacemaker to avoid potential interferencewith the pacemaker. These recommendations areconsistent with the independent research by andrecommendations of Wireless Technology Research.Persons with pacemakers:•Should ALWAYS keep the phone more than sixinches from their pacemaker when the phone isturned ON•Should not carry the phone in the breast pocket•Should use the ear opposite to the pacemaker tominimize the potential for interference•If you have any reason to suspect that interference istaking place, turn your phone OFF immediately.MYX-3p_EN-00.p65 19/12/2002, 15:225

6Safety Information for Wireless handled phonesHearing AidsSome digital wireless phones may interfere with somehearing aids. In the event of such interference, youmay want to consult your service provider.Other Medical DevicesIf you use any other personal medical device, consultthe manufacturer of your device to determine if they areadequately shielded from external RF energy. Yourphysician may be able to assist you in obtaining thisinformation.Turn your phone OFF in health care facilities when anyregulations posted in these areas instruct you to do so.Hospitals or health care facilities may be usingequipment that could be sensitive to sensitive externalRF energy.VehiclesRF signals may affect improperly installed orinadequately shielded electronic systems in motorvehicles. Check with the manufacturer or itsrepresentative regarding your vehicle. You should alsoconsult the manufacturer of any equipment that hasbeen added to your vehicle.Posted FacilitiesTurn your phone OFF in any facility where postednotices so require.MYX-3p_EN-00.p65 19/12/2002, 15:226

7Safety Information for Wireless handled phonesAircraftFCC regulations prohibit using your phone while in theair. Switch OFF your phone before boarding an aircraft.Blasting AreasTo avoid any interfering with blasting operations, turnyour phone OFF when in a “blasting area” or in areasposted: “Turn off two-way radio”. Obey all signs andinstructions.Potentially Explosive Atmospheres•Turn your phone OFF when in any area with apotentially explosive atmosphere and obey all signsand instructions. Sparks in such areas could causean explosion or fire resulting in bodily injury or evendeath.•Areas with a potentially explosive atmosphere areoften but not always clearly marked. They includefueling areas such as gasoline stations; below deckon boats, fuel or chemical transfer or storagefacilities; vehicles using liquefied petroleum gas (suchas propane or butane); areas where the air containschemicals or particles, such as grain, dust, or metalpowders; and any other area where you wouldnormally be advised to turn off your vehicle engine.MYX-3p_EN-00.p65 19/12/2002, 15:227

8Safety Information for Wireless handled phonesFor Vehicles equipped with Air BagAn air bag inflates with great force. DO NOT placeobjects, including both installed or portable wirelessequipment, in the area over the air bag or in the air bagdeployment area. If in-vehicle wireless equipment isimproperly installed and the air bag inflates, seriousinjury could result.Electrical Safety•Only us the appropriate chargers recommended inthe manufacturer’s catalog. Using another chargermay prove dangerous and could invalidate thewarranty of your phone.•The main power socket should be easily accessible.•Make sure that the main voltage corresponds to thelevel marked on the charger identification plate.General Precautions•Do not try to open your phone and repair it yourself.The manufacturer cannot be held liable for anyresulting damage.•Any work done by an unqualified and unauthorizedperson will invalidate your warranty.•Do not use your phone in humid places (bathroom,swimming pool, etc.). Protect it from splashing waterand other liquids.•Do not expose your phone to extreme temperatures.•Keep your phone out of reach of small children. Donot allow them to play with it, it is not a toy.MYX-3p_EN-00.p65 19/12/2002, 15:228

9Safety Information for Wireless handled phones•Only use your phone with original accessories.Failure to comply with these rules will invalidate yourwarranty.•Remember to disconnect the charger beforeremoving the battery.•The physical and chemical processes used inrechargeable batteries mean that temperature limitsmust be followed during rapid charging. Your terminalautomatically protects the batteries from extremetemperatures.•If the phone is disconnected from the battery for anextended period of time, it will lose the time and therecorded voice messages.Emergency CallsIMPORTANT•This phone, like any PCS phone, operates usingradio signals, PCS and landline networks, and user-programmed functions. As a consequence aconnection in all conditions cannot be guaranteed.Therefore you should never rely solely upon any PCSphone for essential communications (e.g. medicalemergencies).•To make or receive any calls, this phone must beswitched on and in service area with adequate PCSsignal strength. Emergency calls may not be possibleon all PCS networks or when certain networkservices and/or phone features are in use. Checkwith local Service Providers.WARNING•The manufacturer cannot be heldliable for any failure to comply with theabove recommendations or for anymisuse.•The software program developed bySAGEM SA remains the exclusiveproperty of SAGEM SA. It is thereforehighly prohibited to modify, translate,decompile or disassemble thissoftware program or any part thereof.•SAGEM SA may not be heldresponsible for the contents ofmessages, software or objectsdownloaded and/or for any direct orindirect consequential damage to thephone itself.MYX-3p_EN-00.p65 19/12/2002, 15:229

10Safety Information for Wireless handled phones•When making an emergency call, remember to giveall the necessary information as accurately aspossible. Remember that your PCS phone may bethe only means of communication at the scene of anaccident - do not terminate the call until givenpermission to do so.•If certain features are in use (such as Keyguard), youmay first need to turn those features off before youcan make an emergency call. Consult this manualand your local PCS Service Provider.Emergency Calling•If the phone is not on, press .•Key in emergency number for your present location(e.g. 911 or other official emergency number).•Press .•If you dial 911 during a call, the phone terminatesthe current call and attempts to make a call to theemergency number 911.FCC/INDUSTRY CANADA NOTICEYour phone may cause TV or radio interference (e.g.when using telephone in close proximity of receivingequipment). The FCC/INDUSTRY Canada can requireyou to stop using your telephone if such interferencecannot be eliminated. If you need assistance, contactyour local dealer.This device complies with parts 15 and 68 of the FCCrules. Operation is subject to the condition that thisdevice does not cause harmful interferences.MYX-3p_EN-00.p65 19/12/2002, 15:2210

11Switch onPress .CallDial the number then press .AnswerPress .Hang upPress .Switch offPress (long press).Hands-freeTo communicate, press .Lock and unlock the keyboard from the standbyscreenPress ∗∗∗∗∗ then OK.Redial last numberPress twice.Make a call from a number stored in the directoryBy name: enter the first letter of the name, press ,scroll down the list to find your correspondent, thenpress to call.By location in the directory: enter the location numberthen press ∗∗∗∗∗ to call.Functions at a glanceMYX-3p_EN-00.p65 19/12/2002, 15:2211

12Menus at a glanceEnter using or Navigate using and Validate using OKQuit or return to the previous menu using CAccording to the model of your phone, to theconfiguration of the networks and associatedsubscriptions, certain functions may not beavailable (indicated by *).Depending on the model, the phone menus willappear as listed below:ServicesDirectoryDirectory menuSort by locationCreate recordCall groupsAvailable memoryPersonal numbersQuitText messagesWrite new...Call servicesCall forwardingView last numbersDuration and cost of calls (*)GPRS countersDisplay numbersDouble callAutomatic redialVoice mail numberLocal information (*)Ringing and beepsVolume and choice of musicCall groupsPersonalised ringing toneVibrateSilent modeBeepsControlsCustomizationSelect languageAutomatic responseNetwork selectionSetting time/dateDisplay contrastCurrency converterSecurityKeyboard lockingPIN numberPIN number 2 (*)Phone codeConfidentiality messagesOperator password (*)Limit incoming calls (*)Limit outgoing calls (*)Pre-set directory (*)Costs (*)AccessoriesCalculatorAlarmTimerCar kit (*)Data parametersGamesMYX-3p_EN-00.p65 19/12/2002, 15:2212

13SommaireOutgoing call A call made from your phone.Incoming call A call received by your phone.SIM card The card containing your subscription and access rights to services. Thedetachable part is the “micro-SIM”.PIN The personal code linked to your SIM card.PIN2 The second personal code linked to your SIM card to access certainfunctions (*).Phone code The phone code is a secret code intended to protect the phone in case of theft.IMEI The identification number of your phone.SMS or EMS Short Message Service or Extended Message Service: sending and receipt oftext messages, icons, animated screen savers and melodies.Service provider Company which manages the network subscription.or operatorGlossaryMYX-3p_EN-00.p65 19/12/2002, 15:2213

14ContentsPresentation of the phone ........................... 16Function keys .............................................. 17Alphanumeric keyboard ............................... 17Key 1 ........................................................... 18Key ∗∗∗∗∗.......................................................... 18Display ......................................................... 18Exchanging the front and back panel ........... 19Getting started .............................................. 20Information on the SIM card ......................... 20Installing the SIM card and the battery .......... 21Charging the battery ..................................... 22Switching on/switching off, starting up .......... 23Setting Time and Date ................................. 23Searching for a network ............................... 24Switching off ................................................ 25Recommendation ........................................ 25Menu access ............................................... 25Deleting characters ...................................... 25Initial communication - Hands-free mode .. 26Making a call ................................................ 26Receiving a call ........................................... 26Volume control ............................................. 26Hands-free mode ......................................... 27Ending a call ................................................ 27Directory ....................................................... 28Directory display .......................................... 28Storing a number ......................................... 28Deleting a number ....................................... 29Call groups .................................................. 29Sorting ......................................................... 31Sending a short message to a storednumber ........................................................ 31Directory memory space .............................. 32Displaying personal numbers ....................... 32Making a call with a stored number .............. 32Messages ...................................................... 33Receiving a message .................................. 33Editing a message using EasyMessage T9™............................................. 39Options for messages in the list ................... 43Calls ............................................................... 44Forwarding calls ........................................... 44Viewing the list of the last numbers used ...... 45Monitoring the duration and cost of calls (*) .. 45GPRS transmissions .................................... 46Displaying the numbers ................................ 46Authorising double call ................................. 47Configuring automatic redial ......................... 48Voice mail number ....................................... 48Local information distribution ........................ 48Replacing the international prefix ................. 48Placing calls on hold .................................... 49Multi-conferencing (*) ................................... 49Ringing tones ............................................... 51Selecting the volume and the type of ringingtone ............................................................. 51Call groups .................................................. 51Personalising the ringing tone ...................... 52Setting the vibrator ....................................... 53Selecting silent mode ................................... 53Setting the beeps ......................................... 53Deleting DTMF tones ................................... 54MYX-3p_EN-00.p65 19/12/2002, 15:2214

15ContentsSettings ......................................................... 55Customizing your phone .............................. 55Selecting the display language ..................... 57Select the type of response .......................... 58Selecting the network ................................... 58Setting the time and date ............................. 59Controlling screen contrast ........................... 60Converting currencies .................................. 60Security ......................................................... 61Locking the keyboard ................................... 61Changing the PIN number ............................ 61Changing the PIN2 number (*) ..................... 62Changing the phone code ............................ 62Changing the operator password (*) ............. 63Limiting incoming calls (*) ............................ 63Limiting outgoing calls (*) ............................. 64Setting up the pre-set directory (*) ................ 64Charge checking (*) ..................................... 65Confidentiality messages ............................. 65Accessories .................................................. 66Calculator .................................................... 66Setting the alarm .......................................... 66Setting the timer ........................................... 67Configuring your phone with a car kit ............ 67Data parameters .......................................... 68WAP ............................................................... 69The WAP menus ......................................... 69Configuration of parameters ......................... 70Connection .................................................. 72Downloading objects .................................... 72Disconnection .............................................. 72Exit from the WAP function .......................... 73Icons ............................................................ 73GPRS .......................................................... 73Games ........................................................... 74Available accessories - Upkeep ................... 75Available accessories .................................. 75Upkeep ........................................................ 75Battery ......................................................... 75Maintenance menu ...................................... 75Recommendations ....................................... 76Technical Characteristics ............................ 80Troubleshooting ........................................... 82MYX-3p_EN-00.p65 19/12/2002, 15:2215

16Presentation of the phone41OKCsmyX-3p@ghi236mno95jkltuv+7pqrsabcdefwxyz801 - Ear phone/Speaker2 - High definition graphics screen3 - Programmable lefthand key4 - Central Mobile Internet access key5 - Programmable righthand key6 - Scrolling arrows7 - Stop/End call8 - Operate/Call - Activation of hands-free9 - Cancel10 - Validate11 - Battery charging and accessories socket12 - MicrophoneWARNING!During a call, mind you do not obstruct themicrophone with your hand.1123457 8961012 11Presentation of the phoneMYX-3p_EN-01present.p65 19/12/2002, 15:2216

17Presentation of the phoneFunction keysSwitch off – Reject a call – Hang upSwitch on – Call a number – Receive a call – Hands-free mode - Wap services menuCShort press: Return to the previous menu – Delete acharacterLong press: Exit menu mode – Complete deletion ofthe entry OK Validate- Programmable keys for direct access to the functionsthat you have selected (depending on model)- Volume control during conversation (lefthand key :lower, righthand key : louder)- Contextual action@Mobile Internet access key and Entry and scrolling through the menus.Alphanumeric keyboardMade up of 12 keys: 0 to 9, ∗∗∗∗∗ and #.To obtain a number or letter, hold down the relevantkey until the desired number or letter appears.Letters with accents are obtained by a long press on ∗∗∗∗∗after entering the letter with no accent.Punctuation marks and special symbols are obtainedby a long press on the # key.MYX-3p_EN-01present.p65 19/12/2002, 15:2217

18Presentation of the phoneKey 1A long press on key 1 allows you to access thevoicemail service (depending on model).Key ∗∗∗∗∗A long press on key ∗∗∗∗∗ allows you to activate ordeactivate the silent mode.DisplayThe high definition graphics screen enables you to readmessages easily. Various icons inform you about thestatus of functions.Battery charge indicator (black if charged, clear ifdischarged)Received signal strength indicator (maximum strength:5 bars)The R letter indicates if the network found does notcorrespond to the subscriptionIf flashes, the phone is searching for a networkHands-free loudspeakerCall in progressPermanent call forwardingSilent modeReceipt of messages and presence of messages notread.Flashing: message memory full.Voice messages present.MYX-3p_EN-01present.p65 19/12/2002, 15:2218

19Presentation of the phoneThe three keys located under the screen are allocatedto actions described at the bottom of the screen justabove the key, each time it is necessary.For example:Validate Pressing the righthand key validates thecurrent function.Exchanging the front and back panelSwitch off the phone.1 Turn it over and slide the back catch upwards.2Take off the back cover starting at the bottom. Takeout the central section and the keypad.3 Position the keypad in the new front cover makingsure that no dust gets in, then follow with the centralsection.4 Replace the back cover, clicking in first the upperpart then the lower and pushing the back catchdownwards into the locked position.3214MYX-3p_EN-01present.p65 19/12/2002, 15:2219

20Getting startedInformation on the SIM cardTo use your phone, you have a small card called a SIMcard. In addition to all of the information necessary forthe network, this card contains other information thatyou can modify:• secret codes (PIN and PIN2 - Personal IdentificationNumber)• directory• mini-messages• functioning of specific services.Your phone is compatible with the different SIM cardsprovided by the Operators.It is compatible with SIM/WIM cards (cards whichcontain in addition the WIM module (Wireless IdentityModule) which allows secured WAP communications).SIM cardThis card must be handled and stored withcare in order to avoid excessive stresses orscratches that would damage it. If your SIMcard is lost, contact your Operator orService Provider immediately.Note: Do not leave you SIM card within thereach of small children.Getting startedMYX-3p_EN-02Getting started.p65 19/12/2002, 15:2220

21Getting startedInstalling the SIM card and the batterySwitch off your phone and disconnect the charger.The SIM card is inserted beneath the phone’s battery.1Turn your phone over and slide the backcatch up.2Take off the back cover, starting from the bottom.3Take out the battery.4Slide the card along the base beneath the retainingplate, with the gold coloured sections facing towardsthe phone and the cut-off corner lined up to matchthe drawing on the phone.5Place the battery by first inserting the upper sectioninto the opening.6Replace the back cover, clicking in first the upper partthen the lower and pushing the backcatch downwardsinto the locked position.123456MYX-3p_EN-02Getting started.p65 19/12/2002, 15:2221

22Getting startedCharging the batteryYour phone is powered by a rechargeable battery. Anew battery must be charged for at least 4 hours beforeit is used for the first time. It will reach its nominalcapacity after several usage cycles.When your battery has run down, the phone displays itand cuts out.To recharge your battery:Connect the charger to a wall outlet.Connect the end of the charging cable to the bottom ofyour phone.The phone will start charging. The battery chargingindicator indicates the charge.Charging stops by itself.Unplug the cable.It is possible that during charging, the battery may heatup slightly; this is normal.WarningThere is a risk of explosion if the batteryis incorrectly replaced or disposed of infire.Do not short-circuit.The battery does not contain anycomponents that can be changed byyou.Do not attempt to open the battery case.Only use the correct chargers andbatteries as shown in the manufacturer’scatalogue.Spent batteries must be collected at theappropriate sites.You are advised to remove the battery ifyou intend to leave your phone unusedfor a long period.41ghi236mno95jkltuv+7pqrsabcdefwxyz80MYX-3p_EN-02Getting started.p65 19/12/2002, 15:2322

23Getting startedSwitching on/switching off,starting upTo switch on your phone:Press to switch on your phone.If access to the SIM card is protected by a secret code,the phone will ask you to enter your PIN code.PIN codeThis is the personal code for your SIM card. You maybe asked to enter this code when the instruction: Pinnumber? appears after you switch on your phone.Enter the code of between 4 and 8 digits given to youby your operator. These digits will not be displayed onthe screen for security reasons.Press # or OK or on righthand key to validate.PIN2 code (*)If one was given to you by your Operator, a second PINcode provides secure access to certain functions.Setting Time and DateThe first time the phone is used, the time and date willneed to be set.If the battery has completely run down or been takenout, you will be asked to validate the time and date.WarningIf the wrong PIN code is entered threetimes in a row, the card will be locked. Tounlock your card:- enter **05*- enter the PUK code (PersonalUnlocking Key) provided by yourNetwork Operator and validate,- enter your PIN code and validate,- enter your PIN code again and validate.After 5 or 10 times (depending on SIMcard type), the SIM card will bepermanently locked. Contact yourOperator or your Service Provider toobtain a new card.The same procedure (entering 052)applies when the PIN-2 code is blocked(PUK 2 code).Control of the PIN codeIf your phone displays SIM absent,press (long press) to switch off yourphone and check that your SIM card iscorrectly positioned.MYX-3p_EN-02Getting started.p65 19/12/2002, 15:2323

24Getting startedSetting the timeSet the time either by typing it in or by using thescrolling arrows to alter the numbers already displayed.Setting the dateSet the date either by typing it in numerically or byusing the scrolling arrows to alter the display.When the time and date are correct, validate with theOK key.Searching for a networkThe phone then searches for a network on which it cancommunicate:If it finds one, the name of the network appears on thescreen.You are ready to make or receive a call.If the R letter and a network name are displayed, callscan be made and the indicator light flashes green.If the R letter is displayed without any network name,only emergency services will be accessible (police,ambulance, fire brigade).If the flashes, the phone will keep searching. Nonetwork is available.Network indicatorThe indicator of the level of networksignal received enables you to visualisethe quality of reception. If it shows lessthan three bars, look for better receptionto make your call in good conditions.MYX-3p_EN-02Getting started.p65 19/12/2002, 15:2324

25Getting startedSwitching offHold down the key until the end message isdisplayed.Release the key. The phone switches off.RecommendationYour phone is equipped with an integrated antenna. Forthe best reception, try not to cover the top part of thephone with your hand.Menu accessThe menu functions permit you to verify or modify thevarious functions of your phone to adapt it to yourneeds.Press the scrolling arrows or to access themenus.Scroll through the menus using the scrolling arrowsthen press OK to access the selected menu.Each time you want to validate an action, press OK.To abandon an action, press C.To exit the menu mode, press and hold C.Deleting charactersYou can cancel an entry error:Press quickly on C to delete the last character.Direct access to menusTo directly access a menu, press then enter the number of the selectedmenu.MYX-3p_EN-02Getting started.p65 19/12/2002, 15:2325

26Initial communication - Hands-free modeMaking a callThe network is displayed.Dial the number.Press .During the call, flashes on the screen, and tonesmay signal the establishment of a connection.When the person you have called answers, speak.Receiving a callWhen you receive a call:Press then speak.The caller’s number is displayed when it is presentedto the network.All incoming and outgoing call numbers are registeredin the list of the last calls.Volume controlIncrease or decrease the volume during a conversationby pressing the lefthand ( ) or righthand ( ) key.International callPress 0 (long press) to display + thendial the country code without waiting fora tone, then the number you require.Emergency servicesDepending on the operator, you cancontact the emergency services with orwithout a SIM card or when the keyboardis locked. It is sufficient to be in a zoneserved by a network.To call the international emergencyservice, dial 112 then press .Other emergency service numbers mayexist, depending on the country.Initial communication - Hands-free modeMYX-3p_EN-03comm.p65 19/12/2002, 15:2326

27Initial communication - Hands-free modeThe “Hands-free” mode enables you tofollow a conversation with severalpeople and be free to move, forexample, to take notes during yourconversation.WarningBefore putting the phone to your ear,check the volume control settings aswell as the selected listening method,especially if using integrated hands freemode, which could cause ear damage ifused incorrectly.Hands-free modeDuring a call, you can transfer from handset mode tohands-free mode simply by pressing one key and thereverse.Press .The screen displays for handset mode and for“hands-free” mode.Ending a callPress .The end of call message appears on the screen.MYX-3p_EN-03comm.p65 19/12/2002, 15:2327

28DirectoryDirectory displayYou can store the telephone numbers that you callregularly:- in the SIM card,- in the phone itself.Different icons will inform you of the directory locationwhere the number is stored when you search for it:SIM card directoryYour phone’s directorySIM card pre-set directory.Storing a numberIn the Directory menu, select Create record. Validateby pressing OK.Enter the name (the number of accepted charactersdepends on the SIM card used). Validate.Enter the number including the area code, if necessary(up to 20 characters). Validate.You can enter spaces in the number (displayed ascommas “,”) by pressing (long press) on ∗∗∗∗∗ or #. Thefigures entered after a space are processed in a DTMFsequence (usable after a number).If necessary, select the call group to which you want toassign this number.Depending on the available space, you can select thestorage location of the number entered: SIM card orphone itself.The quantity of phone numbers storedin the SIM card directory variesdepending on the capacity of the card.Your Operator or your Service Providercan provide you with this information.It is advisable to store numbers in theirinternational format (+, country code,and number). You can verify thecontents of a record and modify it byselecting the required name.When sorting by location, pressing onthe ∗∗∗∗∗ key launches a search for the firstavailable location; pressing on # returnsto the start of the list.DirectoryMYX-3p_EN-04Directory.p65 19/12/2002, 15:2328

29DirectoryDeleting a numberTo delete the contents of a directory location, select thename using the scrolling arrows. Validate by pressingOK. Select Delete, then validate.Call groupsYou are also able to classify contacts recorded in thedirectory into Call Groups.To each of these groups you attribute certaincharacteristics (icon, ringing tone, vibrator, etc.).Creating a groupGroups are defined by default in your phone.In order to look up their characteristics, display a list ofthe groups - Directory/Directory menu/Call groupsmenu.Using the scrolling arrows, choose a group and pressOK. You are then able to look up or alter itscharacteristics or to erase the group.To create a new group:Go into Directory/Directory menu/Call groups.Choose Create group.Enter a name and validate.Choose an icon using the scrolling arrows and validate.Choose a ring tone, then choose a vibrator mode, andvalidate.MYX-3p_EN-04Directory.p65 19/12/2002, 15:2329

30DirectoryThe selection of a call group is made when entering anumber into the directory, or when modifying a numberyou have already saved.Activate the Call Groups functionIf you want the characteristics of the groups to apply toeach call:Go into Directory/Directory menu/Call groups.Choose Activate groups.Tick the box and validate.The calls received from contacts who do not belong toa Call group use the parameters provided in theRinging and beeps menu.Available memoryTo ascertain the number of groups which can still becreated:Go into Directory/Directory menu/Call groups/Group menu.Choose Available memory.The first number shows the number of groups whichcan still be created, and the second shows themaximum number of groups.Looking up a groupSelect the group to be looked up and press OK.Choose See group. The screen presents the name,the icon, and the choice of vibrator mode of the group.If there are contacts attached to this group, press therighthand key to view the list of these ones.If call groups are not enabled, youcannot attach correspondents togroups.MYX-3p_EN-04Directory.p65 19/12/2002, 15:2330

31DirectoryModifying a groupSelect the group to be modified, and press OK.Choose Modify.Carry out the wanted modifications.Validate by OK.Deleting a groupSelect the group to be deleted, and press OK.Choose Delete.Confirm by OK.SortingDirectory menu enables you to sort the storednumbers by name or location; for the latter, the freelocations are indicated in the list.Sending a short message to a storednumberSelect the recipient scrolling using the scrolling arrowsand validate using OK. Select Send message andvalidate using OK.Compose your text message.Press OK. Select Send and validate using OK. Therecipient number is displayed.Send your message using the righthand key .MYX-3p_EN-04Directory.p65 19/12/2002, 15:2331

32DirectoryDirectory memory spaceIn Directory menu, select Available memory. Validateusing OK.The screen will display the amount of available spaceon the SIM card and on the phone itself.Displaying personal numbersUsing Directory menu/Personal numbers menu, youcan create records for your own numbers in order to beable to consult them.Making a call with a stored numberHere are all the ways you can call a correspondent,whose number you have saved in the directory, fromthe standby screen:1) Enter the first letter(s) of your correspondent’s name,as you saved it into the directory, and then press .The directory list is displayed, with the first name thatcorresponds with the letter you entered at the top. Ifyour correspondent is not at the top, use the scrollingarrows to select the name.Press on to make the call.2) Enter the number under which you have saved yourcorrespondent’s details, and then press on ∗∗∗∗∗ (rapiddial).3) Enter the number under which you have saved yourcorrespondent’s details, and then press on #. Yourcorrespondent’s number is displayed, at which pointyou can modify or add to the number. Press on tomake the call.MYX-3p_EN-04Directory.p65 19/12/2002, 15:2332

33MessagesReceiving a messageSeveral types of message may be received:•text messages•text messages which may include different types ofobjects (images, melodies, animated icons)•icons for call groups•animated screen savers•melodies•WAP bookmarks•WAP information.When you receive a message, the phone beeps (thebeep is selected using the menu Ringing and beeps/Volume and choice of music/Messages) and the redindicator flashes.The icon is displayed on your phone screen.This icon remains on screen until the messages havebeen read. When the icon flashes, the memory is full.The receipt of icons, animated screen savers ormelodies can take several minutes. Messages informyou of the downloading progress.At any time, you can:•hide that screen by pressing the lefthand key (e.g.to make a call or access other information on yourphone),•or cancel the download in progress by pressing therighthand key .Go into the Text messages menu to access the list ofmessages received.Access to this service depends on thenetwork. For more information, consultyour Operator or your Service Provider.Ask your operator about downloadingicon, animated screen saver or melodymessages.MessagesMYX-3p_EN-05messages.p65 19/12/2002, 15:2333

34MessagesMeaning of the symbols at the top of thescreenThis symbol indicates a text message that has beenwritten. If this symbol is flashing, it means that themessage has not been sent.This symbol indicates a message that has beenreceived. If this symbol is flashing, it means that themessage has not yet been read.This symbol indicates a message which is incompleteor in the process of being received.This symbol indicates that the message is corrupted: itconsists of several fragments, some of which havebeen lost.Meaning of the symbols in front of each messageCall group iconsAnimated screen saversText messagesMelodiesText messages which include objectsActions possible for a message receivedSelect a message.By pressing the lefthand key , you can read a textmessage, view it, listen to it or extract the objects itcontains.Unread messages are in bold.MYX-3p_EN-05messages.p65 19/12/2002, 15:2334

35MessagesPress the lefthand key (Options), to view the optionsavailable, which vary according to the type of messagereceived:•read it•delete it•reply•forward it to another person•consult the available memory•delete all the read messages•delete all the messages•choose a sending option•enter the number of the messaging centre•add a WAP bookmark (see below)•save it in your phone (melody, animated screen saverand icon (see below)).Adding a WAP bookmark in your phoneTo add a WAP bookmark received:If you have just read it, choose the Add WAPbookmark option by pressing the lefthand key (Options).orSelect it in the list and choose the Add WAPbookmark option by pressing the lefthand key (Options).WarningOnly the screen savers and melodieswithout Copyright may be forwarded toanother person and depending onmodel.MYX-3p_EN-05messages.p65 19/12/2002, 15:2335

36MessagesSaving an object included in a text messagewhich has been receivedSome text messages may contain images, melodies(symbolised by a note of music) or animated icons.To save an object in your phone:Put the cursor on the object you wish to save.Press the righthand key (Extract).Press the righthand key .Select New and press the righthand key .Type in a name and press OK.The space required and the space available in thephone are shown.If the maximum number of objects or the maximumtotal size has been reached, you will be asked if youwish to delete objects or replace an existing object withthe new one.Saving a melody in your phoneA melody is saved in the Ringing and beeps/Personalised ringing tone menu.If you have just listened to it, press the righthandkey .orSelect it in the list and choose the Save option bypressing the lefthand key (Options).MYX-3p_EN-05messages.p65 19/12/2002, 15:2336

37MessagesThe space required as well as the space available inthe phone are indicated.If the maximum number of melodies or the maximumcapacity has been reached, you will be asked if youwish to delete some melodies or replace an existingmelody with the new one.This sign placed in front of a melody indicates that itcan be deleted and will free enough memory space tosave the new one.This sign placed in front of a melody indicates that itcan be deleted but will not free enough memory spaceto save the new one.Saving an animated screen saver on your phoneAn animated screen saver is saved in the Controls/Customization/Screen Saver menu.If you have just viewed it, press the righthand key .orSelect it in the list and choose the Save option bypressing the lefthand key (Options).The space required as well as the space available inthe phone are indicated.If the maximum number of animated screen savers orthe maximum capacity has been reached, you will beasked if you wish to delete some animated screensavers or replace an existing one with the new one.üWarningYou must view the entire screen saver inorder to be able to save it.MYX-3p_EN-05messages.p65 19/12/2002, 15:2337

38MessagesSaving an icon in your phoneAn icon is saved in the menu Ringing and beeps/Callgroups/Call groups menu.If you have just viewed the icon, press the righthandkey .orSelect it in the list and choose the Save option bypressing the lefthand key (Options).The space required as well as the space available inthe phone are indicated.If the maximum number of icons or the maximumcapacity has been reached, you will be asked if youwish to delete some icons or replace an existing onewith the new one.Receiving WAP informationInternet servers may send you information messages.In case the phone is not connected to the WAP, awarning message is sent by SMS (preceded by thesymbol @ in the list of messages). When selectingRead, the phone directly goes to the WAP functionwhere a connection may be required for processing.Then you can read the information sent.MYX-3p_EN-05messages.p65 19/12/2002, 15:2338

39MessagesEditing a message using EasyMessage T9™The Easy Message T9™ function helps you to easilyenter messages.Select the Text messages/Write new... menu andpress OK.Selecting the editing languageSelect Options by pressing the lefthand key ; scrolldown to languages and press OK, then scroll down tothe required Language and press OK.Using T9 modePress the key corresponding to the letter required,compose the word by continuing to press the keyscorresponding to the different letters, without worryingabout the display, until the whole word is entered: it willappear in negative, white on black.If the word proposed corresponds to the one you arelooking for, press 0 to validate it, create a space and goon to the next word.IIt is possible that there are several words in thedictionary that contain the same sequence of keyspressed. If the word that appears is not the one youwant, press @ to scroll through the words present inthe dictionary, corresponding to this sequence of keys.When you find the word you want, press 0 to validate,type a space and go on to the next word.As you go along, depending on the keyspressed, the software looks in adictionary for the corresponding wordsthat are most frequently used.T9™ mode is activated as soon as youcreate or modify a message.LanguageBy default, the language used is thatwhich is activated on the phone’s menudisplay (or English if a language notsupported by Easy Message T9™ isselected in the menu).MYX-3p_EN-05messages.p65 19/12/2002, 15:2339

40MessagesIf the word that you want does not appear in thedictionary, several additional modes allow you to varythe nature of the words entered.Additional entry modesThe righthand key selects one mode or another.The 123 mode inserts numbers.The ABC mode enters words that do not exist in thedictionary or in another language. To obtain a letter,hold down the corresponding key. The letters andnumbers scroll. Release the key when the requiredletter appears.The # key allows you to enter symbols. You will see apage of symbols (there are several pages available byscrolling up or down) corresponding to the numbers 0to 9. To select one of these, simply press the corres-ponding number key, ie, 6 for ? After the symbol hasbeen entered in the text, the phone reverts to theprevious mode.The scrolling arrows keys allow you to access toseveral symbol lists.Capital lettersYou can type capital letters, by pressing the ∗∗∗∗∗ keybefore entering the relevant character. The followingcharacters will automatically return to lowercase.Words in capital lettersYou can also choose to type a whole word in capitalletters by pressing twice on the ∗∗∗∗∗ key before enteringthe word. It is possible to return to lower case mode bypressing once on the ∗ ∗ ∗ ∗ ∗ key.MYX-3p_EN-05messages.p65 19/12/2002, 15:2340

41MessagesPunctuation marksPunctuation marks are obtained by using either the 1key (except in 123 mode), or using the Insert symbolsmode (quick access using # key).Accented charactersAccented characters are automatically generated in theword in Easy Message T9™ mode. In ABC mode, youneed to wait for the accented character to be displayedwhilst holding down the corresponding key.Options available when writing a messagePress the lefthand key (Options) to view the variousactions available:•Send your message•Store your message•Insert- images (already predefined in the phone, call groupicons or animated screen savers)- melodies (already predefined in the phone orpersonalised)- symbols: the symbol attaches a of symbols (thereare several pages available by scrolling up ordown) corresponding to the numbers 0 to 9. Toselect one of these, simply press the correspondingnumber key, ie, 6 for ? After the symbol has beenentered in the text, the telephone reverts to theprevious mode.The number of messages stored in theSIM card changes depending on the SIMcard capacity; contact your Operator oryour Service Provider. for furtherinformation.MYX-3p_EN-05messages.p65 19/12/2002, 15:2341

42MessagesPress OK to insert the image or melody you havechosen.Press C to delete the image or melody alreadyincluded in the text.Notes:- Predefined images and melodies are replaced by acode in the messages to reduce the size of themessages sent.- To be able to view the images or listen to themelodies, the person to whom a message thatincludes inserted objects is sent must have anEMS compatible phone.•Languages: T9 mode can be used in differentlanguages- Scroll to the required language and press OK, theT9 mode will use this selected language.•Formatting: the following options are available:- text alignment (this option applies to all the texttyped in),- font size (the size applies to all characters typed inafter you have selected the size),- style (for example, bold) (the style applies to allcharacters typed in after you have selected thestyle).Note: depending on the font, certain sizes or stylesmay not be available.•De-activate Zoom•Cancel.MYX-3p_EN-05messages.p65 19/12/2002, 15:2342

43MessagesOptions for messages in the listWhen a message has been selected from the list ofmessages, pressing the lefthand key (Options)displays the following actions:•read it•send it•delete it•modify it.When Write new... has been selected from the list ofmessages, press the lefthand key (Options) to:•find out how much memory is available•delete the messages that have been read•delete all the messages•select a send option (acknowledgement, reply given,period of validity, message format)•enter the message centre number.Reply to a received message by selecting the relevantmessage from your list with the keys, then press thecentral @ key.When sending a long message, thenumber next to the icon indicatesthe number of calls required to send themessage.MYX-3p_EN-05messages.p65 19/12/2002, 15:2343

44CallsForwarding callsForwarding voice callsDepending on your subscription, this service allows youto transfer incoming calls to another number or amailbox.Scroll through the menu to activate the type offorwarding that you require:•Forward all voice calls: all incoming calls areforwarded to a number you define•Forward all conditional calls•Forward calls when your line is busy•Forward calls when there is no answer on yourextension after a period that you can define byanswering the questions on the menu•Forward calls when your phone is unavailable,outside of network coverage or switched off.Enter the number to which you want to forward yourcalls. If necessary, include the area code you woulduse if you were calling the number from your phone.Validate by pressing the rightand key .A message on the screen confirms that forwarding hasbeen activated.You can also cancel all types of forwarding.You can view the status of a type of call forwarding inorder to verify whether it is active or not. This functionis also useful for controlling the number to which yourcalls are forwarded. The information supplied isprovided by the network.Look out for incompatibilities; for moreinformation, consult your Operator oryour Service Provider.The forwarding number to the messagingcentre depends on the subscription type.WarningCancellations of forwarding can causeparticular reactions in certain networks.CallsMYX-3p_EN-06Calls.p65 19/12/2002, 15:2344

45CallsForwarding data or faxesDepending on your subscription, this service permitsyou to transfer data or faxes that are addressed to youto another number.You can activate the data or faxes forwarding service,to enter the required number, cancel it and view thestatus of the service.Viewing the list of the last numbersusedYou can consult the list of the last numbers used(outgoing and incoming if available).To redial a number:Select from the list using the scrolling arrows.Make the call by pressing on .Shortcut: from the standby screen, press on .Monitoring the duration and cost ofcalls (*)On the Counters menu you can view the duration ofthe last call and all calls made since the last deletion.The Delete durations menu enables you to delete theduration of the last call and reset to zero the total callscounter.On the Costs (*) menu you can view the cost of thelast call and all calls made since the last deletion.For services specific to a network, suchas mailboxes, short dialling is only validwhen covered by the particular network.You may possibly prefer an internationalnumber.This memory is linked to the phone andnot to the SIM card.Several options are available for thisnumber: store it in your directory, sendit a short message, delete it. You canalso delete the whole list of numbers.This data is purely indicative and doesnot represent proof. The meteringcriteria for the network can beappreciably different (indivisible minutes,etc.).MYX-3p_EN-06Calls.p65 19/12/2002, 15:2345

46CallsThe Delete costs (*) menu enables you to clear thecost of the last call and to reset the call counter afterentering your PIN2 code.The Display of duration menu enables you to selectthe duration display during a call.GPRS transmissionsThe GPRS Counters menu allows you to check thevolume of data transmitted by GPRS .Displaying the numbersThis menu permits you to see the status of the displaynumbers function for:•your identity (phone number)•the identity of the person calling you.Anonymous modeYou can decide whether the person you are calling isgiven your phone number or not.•Preset: the phone network default mode.•No: you do not wish to use the anonymous modeand the person you are calling will know yournumber.•Yes: you wish to use the anonymous mode andthe person you are calling cannot know yournumber.MYX-3p_EN-06Calls.p65 19/12/2002, 15:2346

47CallsYour number•On outgoing calls you can check that your phonenumber is displayed on the phone of the person youare calling (CLIR).•On incoming calls, you can check that the telephonenumber of a phone to which you are transferring callswill appear on the phone of a person calling you(COLR).Callers Number•On outgoing calls, you can see the phone number towhich your call is being transferred (COLP) if theperson you are calling has authorised his or heridentity to be displayed by deactivating the COLRoption.•On incoming calls, when it is activated, this functiondisplays on your phone the phone number of theperson calling (CLIP). This function is only possible ifthe caller has authorised his identity to be displayedby deactivating his CLIR option.Authorising double call(Service depending on the operator)During a call, a special tone can inform you thatanother caller is trying to reach you. The caller’snumber - and name, if stored - is displayed on thescreen.During a call, when pressing the central key @, thelefthand key changes function and gives access todifferent possibilities of actions with this call.Call waitingYou can activate, deactivate and viewthe status of the call waiting service inorder to check whether it is active or not.MYX-3p_EN-06Calls.p65 19/12/2002, 15:2347

48CallsConfiguring automatic redialYou can activate automatic redial either by default or ondemand.Voice mail numberTo program a special permanent call number, type inthis number and validate.This number is used when calling the voice mail centrewith the programmable keys.Local information distributionThis menu allows you to activate and select receptionof information distributed by the network.Replacing the international prefix(Depending on model)In the event that a call is not possible with the “+”prefix, you have the option of choosing a replacementprefix with no need to change the number(s) alreadyrecorded with the prefix + in the directory.MYX-3p_EN-06Calls.p65 19/12/2002, 15:2348

49CallsPlacing calls on hold(Service depending on the operator)During a call, you can put the current call on hold bypressing OK.During a call, when pressing the central @ key, thelefthand key changes function and enables you toaccess different options for the call.Multi-conferencing (*)(Service depending on the operator and depending onmodel)A multi-conference is limited to 6 participants: 5 in amulti-conference and one additional callDuring a call, when pressing the central key @, thelefthand key changes function and gives access todifferent possibilities of actions with this call.Standard commandsSequences of standard keys also permit access toservices such as call notification, call holding, multi-conferencing, and open up additional possibilities:0 Reject a call holding or waiting (or multi-conferencecalls).1 End the current call holding or waiting (or the multi-conference calls if there are any) and accept the call(or multi-conference calls).1 X End the current call order number X.WarningIn this case, pressing ends all calls.Multi-conferencing enables you to talk toseveral callers (depending on thenetwork capacity and on the model).MYX-3p_EN-06Calls.p65 19/12/2002, 15:2349

50Calls2 Place on hold the current call (or multi-conferencecalls) and accept the call holding or waiting (or multi-conference calls).2 X Place on hold the multi-conference calls except for thecurrent call order number X (private call).3 Add a call holding (or multi-conference calls) to thecurrent call (or to the multi-conference).Tel N° Place on hold the current call (or the multi-conferencecalls) and call another phone number.Note:If you use this feature, we recommend that you firstplace the current caller on hold, then dial the newnumber as a courtesy to your caller and to ensureprivacy with the other party if desired.End all calls except for a possible call waiting.MYX-3p_EN-06Calls.p65 19/12/2002, 15:2350

51Ringing tonesSelecting the volume and the type ofringing toneYou can set your phone to ring on receiving callsand/or messages.You can, during adjustment, listen to the melodyselected or not: activate or deactivate by pressing thecentral key @; the symbol appears barred or not.Select the ringing tone required using the scrollingarrows.Press the righthand key to move on to the nextsection.Select the volume required for using the phone with thescrolling arrows (from 1 to 4 and + for the volumecrescendo) and validate using OK.Press the righthand key to move on to the nextsection.Select the volume required for using the hands free caror pedestrian kit with the scrolling arrows (from 1 to 4and + for the volume crescendo) and validateusing OK.Call groupsSee chapter How to use the directory for all thefunctions about call groups.Downloaded iconsIf you have saved icons received by message(see Text messages chapter), they will appear in themenu Ringing and beeps/Call groups/Call groupsmenu.There are numerous tunes available(including a “silent ringing tone”) andseveral volume levels including acrescendo.Ringing tonesMYX-3p_EN-07ringtones.p65 19/12/2002, 15:2451

52Ringing tonesIf you select an icon in the list, it will appear at the topof the screen.You can then delete it or select one of the followingoptions:•change its title•consult the available memory•delete the selected icon•delete all saved icons.Personalising the ringing toneYou have the option of creating a personalised calltune. A help menu, accessible by pressing therighthand key , will guide you.If you have saved melodies received by message(see Text messages chapter), they will appear in thatmenu.You can then modify the selected melody (if thecopyright allows it), listen to it or select one of thefollowing options:•change its title•send it by message to another person (if it is notCopyright protected)•consult its memory capacity•consult the available memory•delete the selected melody•delete all melodies.MYX-3p_EN-07ringtones.p65 19/12/2002, 15:2452

53Ringing tonesSetting the vibratorUsing the scrolling keys, select one of the followingoptions: inactive vibrate, only vibrate, vibrate and ring,vibrate then ring.Validate by pressing the righthand key .Selecting silent modeIf you want the ringing tone of your phone to bereplaced by the vibrator and the beeps to besuppressed (except for the alarm tone), tick the boxand validate by pressing OK.You can also activate/deactivate the silent mode byholding down the ∗ ∗ ∗ ∗ ∗ key.This mode is indicated by the symbol on the screen.Setting the beepsDifferent controls are available:Setting the keypad tonesSelect the tone required using the scrolling arrows andvalidate (press the righthand key ).Setting the network toneIf you want your phone to give a warning beep when itlocates a network on which it can communicate:Tick the box and validate by pressing OK.Wherever you require your calls to arrivediscreetly, you can use the vibrator orselect the silent mode.Silent mode is automatically deactivatedwhen the hands free car kit is connectedas well as when the phone is switchedon/off.You can select the tones produced byyour keypad: Beep, DTMF (musicalkeys) or non active tones (in this lastcase, when you press your keyboard, itdoes not make a noise).MYX-3p_EN-07ringtones.p65 19/12/2002, 15:2453

54Ringing tonesSetting the low battery toneIf you want your phone to give a warning beep whenyour battery is low:Tick the box and validate by pressing OK.Deleting DTMF tones(Depending on model)You can delete the emission of DTMF tones during acall. You can thus make a call, in a comfortable anddiscreet way for you caller.To be discreet, clear the selection from the box.Validate by pressing OK.MYX-3p_EN-07ringtones.p65 19/12/2002, 15:2454

55SettingsCustomizing your phoneInstalling the energy saving modeIn order not to use the phone’s screen light and therebyincrease its operating time:In the Customization/Energy saving menu, check Nolight and press OK to validate.Configuring the idle modeYou can choose between an animated idle screen orthe economy mode.In the Customization/Screen Saver menu, use thescrolling arrows to select the animation you want, atext, a banner or the economy mode.Press the righthand key to access the setting of theanimation or economy mode activation interval.Press OK to validate.To exit the animation or economy mode, press .If you have saved animated screen savers received bymessage (see Text messages chapter), they willappear in that menu.The following options are available according to thetype of screen:•validate the animated screen savers as defaultscreen•change its title (only downloaded screens)•consult its memory capacity•consult the available memoryThe frequency of display of the screensaver has a direct impact on the phone'soperating capacity. For optimal operatingcapacity, set the maximum interval.SettingsMYX-3p_EN-08settings.p65 19/12/2002, 15:2455

56Settings•consult the available memory•delete the selected screen•delete all screens.Personalising the welcome screen (dependingon model)You can personalise the welcome screen of your phoneby typing a text. Validate by pressing OK.Customizing the programmable keys(depending on model)This menu, accessible directly by a short press on aprogrammable key from the standby screen, enablesyou to configure the lefthand and righthand keys.There are different possibilities for each of the keys:DirectoryValidate Directory.When you press the key, you can see the names in thedirectory.Rapid dialSelect a name from the directory and validate. Whenyou press the key, you will automatically call the nameselected.The action allocated to a programmablekey is triggered by a long press or twoshort presses only from the standbyscreen.MYX-3p_EN-08settings.p65 19/12/2002, 15:2456

57SettingsSilent modeValidate Silent mode.The ringing tone of your phone will be replacedautomatically by the vibrator and all the beeps will besuppressed (except for the alarm).Call voice mailValidate Call voice mail.When you press the key you will automatically call yourmailbox number.Text messagesValidate Text messages.When you press the key you can read the shortmessages stored in the SIM card or in the phone itself.View callsValidate View callsWhen you press the key, you can view the list of thelast calls made and received if available.Selecting the display languageYou can select the language in which you wish yourphone display to operate:Select AutomaticThe display language will be that of your SIM card (ifavailable).Silent mode This mode, indicated on the screensaver, is automatically deactivated/activated when the hands free kit isconnected.MYX-3p_EN-08settings.p65 19/12/2002, 15:2457

58SettingsOtherwise select the language of your choice using thescrolling arrows and validate by pressing OK.Select the type of responseYou can reply to a telephone call:either automatically, if you have ticked the Automaticans. box (for a hands free kit) and validated bypressing OKor by pressing any numeric key if you have ticked theAny key and validated by pressing OK.Selecting the networkEvery SIM subscription card can store an ordered list ofpreferred networks.If the list has not been programmed, or if none of thenetworks on the list are available or authorised, thephone searches for an authorised network providingthe highest level of signal.If none of the available network is authorized, you canuse your phone to make emergency calls only until anetwork connection can be re-established.If no network is available, your phone continues tosearch for one.In all cases, the phone searches for its home networkfirst.NetworkWhen your home network is notaccessible (abroad, for example), yourphone automatically searches foranother available and authorisednetwork in the order of preferenceindicated by the list on the SIM card.MYX-3p_EN-08settings.p65 19/12/2002, 15:2458

59SettingsAvailable networksThis menu enables you to start a search for allavailable networks at the present location and todisplay them.Use the scrolling arrows to scroll the available networksand validate the one wanted (press the righthandkey ).Preferred networksTo program a list of preferred networks into yourSIM card:Use the scrolling arrows to select from the list.Validate.If the network is not on the list, select the country codethen the network code (ask the organisation from whichyou obtained the SIM card).Setting the time and dateSetting time/date/Control menuSet the hours and minutes by pressing on thecorresponding numbers or by scrolling through thevalues using the or arrows.Press the righthand key to go to the next setting.Set the day, month and year.Press OK to validate.Depending on model, you can choose amanual selection for a network search.MYX-3p_EN-08settings.p65 19/12/2002, 15:2459

60SettingsSetting time/date/Display menuUse the scrolling arrows to select the type of clock tobe displayed on the screen or to display no clock.Press OK to validate.Controlling screen contrastControl screen contrast using the scrolling arrows, andvalidate by pressing OK.Converting currenciesThis menu enables you to convert one currency intoanother. Using the scrolling arrows, you can select:Rapid exchangeIf you tick the Rapid exchange box, the converter willoperate on the standby screen, enter the digits requiredand use the scrolling arrows to perform a conversion.Exchange rateEnter the conversion rate corresponding to the twoselected currencies.CurrenciesEnter the symbols of the two currencies to convert. Along press on C returns to the beginning of the line toenter them (if the symbols are already entered).MYX-3p_EN-08settings.p65 19/12/2002, 15:2460

61SecurityLocking the keyboardThis menu enables you to lock your phone’s keyboardto prevent calls from being made unintentionally in yourbag or pocket.Tick the Lock box: the keyboard will automatically belocked.To unlock your keyboard:Press * then OK.After unlocking, the keyboard will be locked after acertain period.Changing the PIN numberYou can change your PIN number:To the question: Old pin number ?, enter your old PINcode and validate (press the righthand key ).To the question: New pin number ?, enter your newPIN code (a number between 4 and 8 digits) andvalidate by pressing OK.To the question: Verify pin numb. ?, enter your newPIN code a second time to verify and validate bypressing OK.Checking the PIN numberYou can activate your PIN number so that it isrequested and checked every time the phone isswitched on, so that if the phone is lost or stolen, yourSIM card cannot be used:To the question: Pin number ?: enter your PIN numberand validate (press the righthand key ).Locked keyboardYou can still make emergency calls andanswer calls.For a quick keypad locking, press ∗∗∗∗∗ thenOK from the standby screen.WarningIf the wrong PIN code is entered threetimes in a row, the card will be locked. Tounlock your card, call the organisationwhich issued your card for guidance inunlocking it.If your SIM card is permanently locked,contact your Operator or your ServiceProvider to obtain a new card.SecurityMYX-3p_EN-09security.p65 19/12/2002, 15:2461

62SecurityTick the box Pin num. control and validate bypressing OK.Changing the PIN2 number (*)You have a second PIN number. The procedure formodifying the PIN2 number is identical to that for thePIN number.Changing the phone codeThe Phone code menu enables you to activate thephone code so that it is requested and checked eachtime the phone is switched on, in the case of a differentSIM card being used.If the incorrect code is entered, the time intervalbetween each attempt increases, making useimpossible.To change the phone code, you must first check that itis active (Control phone code menu).To activate:To the question: Phone code?, enter 0000 andvalidate (press the righthand key ).Tick the Phone control box and validate bypressing OK.To deactivate:To the question: Phone code?, enter your code(possibly changed) and validate (press the righthandkey ).Do not tick the Phone control box and validate bypressing OK: it will reset the code to 0000.The phone code is a secret code,intended to protect the phone in theevent of theft. It is linked automatically tothe SIM card present on activation.MYX-3p_EN-09security.p65 19/12/2002, 15:2462

63SecurityOnce the phone code is activated, you can modify it:To the question: Old phone code?, enter your oldphone code and validate (press the righthand key ).To the question: New phone code? enter your newphone code (a number of between 4 and 8 digits) andvalidate by pressing OK.To the question: Verif. phone code? enter your newphone code a second time to verify it and validate bypressing OK.Changing the operator password (*)Depending on model, you have an operator passwordsupplied by the network operator. The procedure formodifying this password is identical to that for yourPIN code.Limiting incoming calls (*)Depending on your subscription, this service enablesyou to restrict certain types of incoming calls.If you have this service, you will have been providedwith a password when you subscribed. This passwordis necessary to activate this function.You can activate, deactivate, and view the status of thetype of call barring. You can also cancel ALL types ofbarring.The restriction can apply to ALLincoming calls or to incoming calls whenyou are not in your home country (if youhave roaming).Access to this service depends on yoursubscription type. For more informationcontact your Operator or ServiceProvider.MYX-3p_EN-09security.p65 19/12/2002, 15:2463

64SecurityLimiting outgoing calls (*)Depending on your subscription, this service stopscertain types of outgoing calls being made from yourphone.If you have this service, you will have been providedwith a password when you subscribed. This passwordis necessary to activate this function.You can activate, deactivate, and view the status of thetype of call barring. You can also cancel ALL types ofbarring.Setting up the pre-set directory (*)The pre-set directory allows you to limit calls. Whenyou activate this directory, only the numbers you storein this directory can be called.Before creating it, you must first activate it:Display the Pre-set directory menu.Enter your PIN2 number.Tick the Pre-set directory box.Validate by pressing OK.To create the pre-set directory, proceed as you wouldproceed for another directory (see chapter How to usethe Directory/Storing a number).Access to this service depends on yoursubscription type. For more informationcontact your Operator or ServiceProvider.The restriction can apply to ALL outgoingcalls, to all your INTERNATIONALoutgoing calls or to outgoing internationalcalls EXCEPT those sent to your HOMEcountry.This directory is linked to the SIM card.Thus, its size is determined bylimitations of this card.MYX-3p_EN-09security.p65 19/12/2002, 15:2464

65SecurityCharge checking (*)The Settings menu allows you to select the type ofcharge indication after entering your PIN2 code:- Currency: enter the currency name (maximum3 characters) and charge per unit. Ask your operatorfor this value.- Telephone unit.The Limitation menu allows you to activate the creditfunction in the selected currency after entering yourPIN2 code.Confidentiality messagesThe function Confidentiality messages allows you todelete automatically the numbers recorded in the CallServices menu and the text messages that are in thephone's memory when a new SIM card is inserted. Thisfunction is activated/deactivated in the menuConfidentiality messages.WarningThese functions depend on the abilityof the network to send charge data toyour phone in real time, and on thecapacity or options on your SIM card.MYX-3p_EN-09security.p65 19/12/2002, 15:2465

66AccessoriesCalculatorYou can operate the calculator using the following keys:Add@ Subtract∗∗∗∗∗Multiply# DivideOK EqualsC DeleteLong press on: ∗ ∗ ∗ ∗ ∗ or # or @ or Decimal pointMonetary operations if there is no calculation inprogress(See chapter Phone adjustment) Monetary conversionFrom the standby screen, you can convert a currencyinto another according to the settings chosen(calculator key ) or menu (Controls/Currencyconverter).Setting the alarmTo use your phone as an alarm clock:Using the numbers or the scrolling arrows, set thealarm time.Press the righthand key to go to the next item.Set the minutes.Tick the box and validate by pressing OK.The alarm function is represented onthe screen by the symbol .Permanent flashing of this symbolindicates that an alarm time has beenprogrammed but the date and timeclock has not been initialised.AccessoriesMYX-3p_EN-10accessories.p65 19/12/2002, 15:2466

67AccessoriesThe ringer is stopped by pressing any key; the alarmremains programmed.The alarm function remains active when the phone isswitched off. It is not affected by silent mode.Setting the timerThe same procedure is applied as for the alarmfunction, but in this case you start a time clock runningagainst a defined value. The phone must remainswitched on.Configuring your phone with a car kit(Depending on model)As regards the phone, there are several options:Programming the switch-off delay on yourphoneSet the phone off delay using the numbers or scrollingarrows.Press the righthand key to go to the next item.Tick the box and validate by pressing OK.To use your phone with a hands free kit,see the notes supplied with the kit.This delay starts counting down as soonas the end of a call is detected.MYX-3p_EN-10accessories.p65 19/12/2002, 15:2467

68AccessoriesProgramming the alarm timingYou can be notified that your phone is ringing whenyou are not in your car.For an external warning, set the delay using the digitsor scrolling arrows.Tick the box and validate by pressing OK.Data parametersModels myX-3 and myX-3dYou can set the serial link speed when using ATcommands.Models myX-3dWith a built-in data/fax modem, your phone is a realmobile office: you can exchange data and faxes withouta PCMCIA card by connecting your phone to your PCusing a simple series cable. You can now workanywhere as if you were in your office.Some models can use the PC’s infrared port instead ofthe series cable.To do this, check the box in the Data parameters/IrDAmenu. Connection between the phone and the PC isindicated by an icon on the idle screen.Depending on the model, your phone comes with a CDcontaining detailled information concerning the datafunctions.If a call comes in or goes out or if ashort message is received, connectionin data mode, on the GPRS network, issuspended and resumes automaticallyafter the call.The IrDA function can also be selectedthrough a program-mable key.This can only happen when the vehicleis not running.MYX-3p_EN-10accessories.p65 19/12/2002, 15:2468

69WAPThe WAP function allows connection to Internet sites.Thus, you can connect to sites, among others, whichallow downloading of melodies, icons or animatedscreen savers.The WAP menusFrom the standby screen, press on the central key @to access the local menu for WAP functions.The Services menu, pop-up menu, may be displayedat any time when navigating in the WAP function. Itcontains the following sub-menus:Home: connection to the home page.Bookmarks: from the standby screen, following anumber key with the central key @ initiates access tothe favourite corresponding with the number.You can receive bookmarks by message and add themto this list (see Text messages chapter). You can alsosend some by message:select a bookmark, press the lefthand key (Options)then select Send by SMS.Go to the URL: this menu enables you to directly enteran Internet address.Inbox: this menu enables to read the messages sentby the Internet site.Reload: updating of the current page.Reset cache: empties data stored from previousconnections.Advanced...: see §Configuration of parameters.About...: Information about OpenwaveTM.Exit: return to the phone standby screen.Depending on model, scrolling menu 0allows you to access the WAP function.Bookmarks enables you to record adirectory of Internet site names andaddresses for easy and fast access.When navigating in WAP, you can returnto Menu Services at any time bypressing the green key .The WAP browser remains the exclusiveproperty of Openwave. It is thereforehighly prohibited to modify, translate,reverse engineer, de-compile ordisassemble the browser or any partthereof.WAP: Wireless Application Protocol –This is a protocol which converts Internetlanguage into the language which can beunderstood by a mobile phone.The WAP browser is licensed from:WAPMYX-3p_EN-11WAP.p65 19/12/2002, 15:2469

70WAPConfiguration of parametersAdvanced... menu: access to sub-menus:•Connection settings which allow you to set theparameters for several access providers (dependingon model). The current access service has a star infront of it.Configuration of WAP and GPRS parameters- Select the desired access service using the scrollingarrows then press on Modify (lefthand key ).- Enter the name of the service then validate.- Enter the internet address of the home page thenvalidate.- Enter the Preferred connection settings:GSM if not GPRS (default): the connection to theWAP services accords priority to use of the GPRSnetwork. Nevertheless, in the event of unavailabilityof the GPRS network, then the GSM network is usedin order to establish the connection.GPRS: the connection to the WAP services uses theGPRS network only. In the event of unavailability ofthe GPRS network however, a message indicating“network unavailable” appears, and then theconnection will not be possible.GSM: the connection to the WAP services uses theGSM network only.All of the information to be entered in thesettings is supplied by your operator orservice provider.MYX-3p_EN-11WAP.p65 19/12/2002, 15:2470

71WAP- Press on Details (lefthand key ).The GPRS parameters to be entered are:a user name,a password,the IP address of the WAP gateway: enter the IPnumber using the central key @ (Next) then chooseSecure or Non secure.APN: if no APN has been defined, press on Options(lefhand key ) then Directory. Select an APN andactivate it or add an APN (give a name and validate).The GSM parameters to be entered are:a user name,a password,the IP address of the WAP gateway: enter the IPnumber using the central key @ (Next) then chooseSecure or Non secure.the call number,the access mode (digital or analog).Once all the parameters are entered, you canactivate the selected service.- Confirm your choice with OK.•Show URL which presents the current Internetaddress.•Disconnect which ends the communication (allows anavigation whithout being connected).•Circuit prompt which enables to activate or not theconnection confirmation message at each connectionattempt.MYX-3p_EN-11WAP.p65 19/12/2002, 15:2471

72WAP• Linger timer enables you to set a time limit, afterwhich the phone will disconnect automatically if youhave forgotten to disconnect from a service.•Security which enables a server identification by thephone for security reasons.•FastW@p (depending on model) which providesquicker access to the pages of Internet sites.ConnectionFrom the Home menu, start up connection to aservice.Once connected to a service, press on G then [Menu]to return to the local menu.Connection to a WAP service on the GPRS network isnot interrupted in the case of an incoming call. You cantake the call.Downloading objectsYou may connect to some Internet sites, allowingdownload of melodies, icons or animated screensavers. Once downloaded, they are in the inbox. Then,you can save them in your phone (same procedure asthe one for SMS download).DisconnectionDisconnection is achieved by pressing on G then[Menu] and then by using the Advanced... menu andDisconnect.The @ character disappears from the sreen.Selecting FastW@p in GPRS can affectpricing, depending on the pricing policyadopted by the operator. For furtherinformation, contact your operator.When connecting on the GSM network,the @ character flashes, and the cost ofcommunications starts to clock up assoon as it stops flashing.You will be automatically disconnectedafter a short pause if you have forgottento disconnect from a service.MYX-3p_EN-11WAP.p65 19/12/2002, 15:2472

73WAPExit from the WAP functionTo exit from the browser and end the currentcommunication (if necessary):- pressor- from the local menu, select Quit and validate bypressing OK.IconsThe G icon enables you, by pressing the centralkey @, to access two display modification possibilities:- the zoom to change the size of characters bypressing on the lefthand key succesively,- full screen display by pressing on the righthandkey .GPRSA flashing display indicates that connection is beingmade with the GPRS network (the phone is in theprocess of connecting with the network).A fixed display indicates that the phone is connected tothe GPRS network.This icon is not displayed if GPRS is not available onthe network or if the SIM card inserted in the phonedoesn’t support the GPRS service.It can also disappear during access to WAP services ifthe connection uses the GSM system instead of theGPRS.MYX-3p_EN-11WAP.p65 19/12/2002, 15:2473

74GamesDepending on the model, several games are available.The presentation menu guides you on how best to usethem.GamesMYX-3p_EN-12games.p65 19/12/2002, 15:2474

75Available accessories - UpkeepAvailable accessoriesDepending on the model, different accessories areavailable on your phone:•Additional batteries•Additional chargers•Desk charger•Cigarette lighter adapter•Hands-free kits•Front and back covers in different colours•A cable for data exchange between your phone and aPC.UpkeepClean your phone using a soft slightly damp non fluffycloth.BatteryAfter a long period of non use (several months), whenthe charger is being connected, the unit might notswitch on.In this case:Disconnect the charger, wait a few seconds, and plug itin again.It may be necessary to repeat this several times.Maintenance menuThis menu contains information that you could beasked for to perform specific operations. If they arerequired, you will be shown how to find information youneed.WarningDo not connect/disconnect the specialsocket on your phone during a call.The use of the EXTERNAL SIGNALfunction to activate the lights on avehicle or the horn, in order to take acall on a public road, may not beauthorised.WarningCertain chemical products can damageplastic. Do not use aerosols, certainspecial cleaning products, corrosiveproducts, solvents, alcohol anddetergents.Available accessories - UpkeepMYX-3p_EN-13acess-upkeep.p65 19/12/2002, 15:2475

76RecommendationsThe use of your phone is controlled by safetyregulations intended to protect both the user and his/her environment.Electrical safetyOnly use the appropriate chargers contained in themanufacturer’s catalogue. Using another charger couldbe dangerous and will invalidate the manufacturer’swarranty.The main plug socket must be easily accessible. Themain voltage should correspond to that given on themanufacturer’s plate on the charger.Airplane safetyIn an airplane, your phone must be switched off toensure that it does not interfere with the planessystems.Its use is illegal and you could be prosecuted orbanned from using cellular networks in the future if youdo not abide by these regulations.Areas containing combustiblesIt is advisable to switch your phone off in the vicinity ofgas stations.Regulations limit the use of radio equipment inchemical factories, gas depots and any area wherethere are mines. You are advised to abide by theserules.CE marking on the unit conforms todirectives 1999/5/EC, 89/336/CEE and73/23/CEE.RecommendationsMYX-3p_EN-14recommendations.p65 19/12/2002, 15:2476

77RecommendationsRoad safetyExcept in an emergency, do not use your phone whendriving without a hands-free kit that enables you tomaintain your freedom of movement. Always keep youreyes on the road when you are driving.To make a call, pull to the side of the road, then makeyour call. Abide by the current laws.The phone must be shielded sufficiently from electronicequipment in the vehicle. It gives off micro-waves,which may affect the operation of such equipment.Installation of your phone in a vehicle must only beperformed by qualified personnel.Non ionising radiationTo obtain maximum satisfaction from your phone, use itin a vertical position. Your personal safety can only beimproved by doing so.Electronic medical equipmentYour phone emits radio waves that could possibleinterfere with electronic medical equipment, forexample an auditory prosthesis, heart pacemakers, …Your doctor or the manufacturer of the medical item willbe able to advise you on whether your phone couldcause such interference.In hospitals, the phone must be switched off.WarningEnsure that no part of your body ispermanently close to the aerial unlessthere is a metal screen (e.g.: a vehicleroof, …).MYX-3p_EN-14recommendations.p65 19/12/2002, 15:2477

78RecommendationsGeneral precautionsDo not attempt to open your phone and repair ityourself. The manufacturer cannot be held responsiblefor any damage/accident that may result from this.Any work carried out by non-authorised personnel willinvalidate your warranty.Do not use your phone in damp areas (bathroom,swimming pool, …). Protect it from liquids and othermoisture.Do not expose your phone to extreme temperatures.Do not leave your phone within the reach of smallchildren (certain removable parts may be accidentallyingested).Use your phone with original accessories, or yourwarranty will be rendered invalid.The physicochemical processes created by chargersimpose temperature limits when charging the battery.Your phone automatically protects the batteries inextreme temperatures.Removing the battery may mean that the time is lost.You are strongly advised not to connect your phone tothe charger if it doesn’t contain a battery.To avoid the risk of demagnetisation, do not letelectronic devices close to your phone for a long time.MYX-3p_EN-14recommendations.p65 19/12/2002, 15:2478

79RecommendationsSAGEM SA cannot be hold responsible for thecontents of messages, programs and downloadableobject and for the direct or indirect damage which maybe cause to the user of the phone or the phone itself.Note on downloading facilitiesYour mobile phone allows you to download ringtones, iconsand animated screen savers. You must check that theseobjects are free of copyright. SAGEM is not responsible forthe content of downloaded objects.Some of these objects may contain data which may causemalfunction or loss of data within your mobile phone (ie, avirus).For this reason, SAGEM declines all responsibility for (1) thereception of data that has been downloaded or loss of saiddata, (2) the consequences on the operation of the mobilephone and (3) damage resulting from the reception of saiddownloaded data or loss of said data. Moreover, SAGEMdraws attention to the fact that problems caused by thereception of downloaded data that does not comply withSAGEM’s specifications are not covered by the guarantee.Consequently, the cost of diagnosing and repairing mobilephones affected by said downloaded data will be charged tocustomers.The software program developed by SAGEM remains theexclusive property of SAGEM SA. It is therefore highlyprohibited to modify, translate, de-compile or disassemble thissoftware program or any part thereof.MYX-3p_EN-14recommendations.p65 19/12/2002, 15:2479

80Technical CharacteristicsWeight: 92 gSize: 106x46x20 mmVolume: 78 cm3Original battery: Lithium Ion 720 mAhBattery life calls/standby: up to 4 h/240 hThe technical characteristics of the product are subjectto change without notice.Your mobile phone is a radio transmitter and receiver. Itis designed and manufactured not to exceed the limitsfor exposure to radio frequency (RF) energy. Theselimits are part of comprehensive guidelines andestablish permitted levels of RF energy for the generalpopulation. The guidelines are based on standards thatwere developed by independent scientific organisationsthrough periodic and thorough evaluation of scientificstudies. The guidelines include a substantial safetymargin designed to assure the safety of all persons,regardless of age and health.The exposure standard for mobile phones employs aunit of measurement known as the Specific AbsorptionRate, or SAR. Tests for SAR are conducted usingstandard operating positions with the phonetransmitting at its highest certified power level in alltested frequency bands. Although the SAR isdetermined at the highest certified power level, theactual SAR level of the phone while operating can bewell below the maximum value. This is because thephone is designed to operate at multiple power levelsso as to use only the power required to reach thenetwork. In general, the closer you are to a basestation antenna, the lower the output of the phone.Technical CharacteristicsMYX-3p_EN-15charactech.p65 19/12/2002, 15:2480

81Technical CharacteristicsBefore a phone model is available for sale to thepublic, compliance with the regulations must be shown.In the countries that have adopted the SAR limitrecommended by ICNIRP (this includes EuropeanUnion, Brazil and other countries), the limit is 2 watts/kilogram (W/kg) averaged over ten grams of tissue.The highest SAR value for this model phone whentested for compliance against the standard was0.64 W/kg.In countries that have adopted the SAR limitrecommended by FCC (USA, Taiwan…), the limit is1.6 watt/kilogram (W/kg) averaged over one gram oftissue.The highest SAR value for this model phone whentested for compliance against the standard was1.2 W/kgWhile there may be differences between the SARlevels of various phones and at various positions, theyall meet the requirements for RF exposure.MYX-3p_EN-15charactech.p65 19/12/2002, 15:2481

82TroubleshootingProblem - Situation ActionsThe phone does not turn on Remove the battery and then replace it.orConnect the phone to the charger (check that this isplugged in) for approximately 5 minutes.No network recognised Remove the SIM card. Check that there is no dust orgrit in the SIM slot. Replace the SIM card being sure topush it right up to the stop point.Calls to a messaging service or voice Check in the Ringing and beeps/Tones menu that theserver do not get through box is ticked.Unable to turn the phone on Charge the phone for 15 minutes before turning it on.Check the battery charging indicator:cycling: charging normallynot cycling: disconnect the charger, re-connect andthen check the battery charging indicator: if it is still notcycling, disconnect the charger and re-connect severaltimes.If the battery is still not charging, contact the after salesservice.When the battery charging indicator is continuously on,the battery is fully charged.Error message: The battery pack is not recognised by the phone.BATTERY STATUS NOT KNOWN Check that the battery pack is correctly fitted in thephone.Error message: LOW BATTERY This message is displayed when the battery charge istoo low. The phone turns off automatically. Charge thephone.MYX-3p_EN-16dépannage.p65 19/12/2002, 15:2482

83TroubleshootingProblem - Situation ActionsError message: SIM NOT PRESENT Check that the SIM card has been inserted correctly.Examine the SIM card. If it is damaged, contact yourmobile phone operator sales point. If the message isstill displayed, contact the after sales service.Error message: INCORRECT PIN The PIN has been incorrectly entered. If the PIN isentered incorrectly three times, the SIM card isblocked.Error message: SIM BLOCKED The PIN has been incorrectly entered three times. Useyour Personal Unblocking Key (PUK) to unblock theSIM card.Enter:**05*PUK*PIN*PIN#PUK: your PUK code supplied by your mobile phoneoperator.PIN: your PIN code.After 10 (or 5 depending on the type of SIM card)unsuccessful attempts, the SIM card is blockedpermanently. You must then contact your mobile phoneoperator to get a new card.Error message: SIM LOCKED The mobile phone operator may require certain typesof SIM card to be used. This message indicates thatthe SIM card is not accepted.Remove the SIM card and turn the phone on again. Ifyou get the SIM not present error message, check withyour phone dealer whether your SIM card iscompatible. Otherwise, contact the after sales service.MYX-3p_EN-16dépannage.p65 19/12/2002, 15:2483

84TroubleshootingProblem - Situation ActionsThe phone display does not change Press a key. If nothing is displayed, check the positionof the SIM card. If the problem continues, contact theafter sales service.No connection made Check the form of the number called.Check that there is at least one field strength dotshowing. If R is displayed but there is no mobile phoneoperator name, only emergency calls are allowed.Check that you have not used all your credit with themobile phone operator.Check that the SIM card provides the service yourequired and that it has not expired.Check and, if necessary, disable the outgoing call lock.The network is saturated. Please try later.If you still have problems getting a connection, contactthe Hotline.Unable to receive calls Try to make a call to check that the phone and thenetwork are operational.Check and, if necessary, disable the permanent callredirection (permanent call redirection icon displayed).Check and, if necessary, disable the incoming call lock.If you still have problems receiving calls, contact theHotline.MYX-3p_EN-16dépannage.p65 19/12/2002, 15:2484

85TroubleshootingProblem - Situation ActionsCannot send messages Check that the SIM card provides this service.Check that the message server is correctly set up.Try to make a call to check that the phone and thenetwork are operational.Try sending the message later.No voice box Check that the SIM card provides this service.Set up the redirection to the voice box using theinformation provided by the mobile phone operator.DépannageMYX-3p_EN-16dépannage.p65 19/12/2002, 15:2485

Navigation menu