Sagem Wireless 95M2004 GSM 900/1800/1900 Mobile Phone User Manual myX 5 2 lu en

Download:
Mirror Download [FCC.gov]
Document ID	448732
Application ID	/GIPnn4ff9n10nFUPhS2KQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	251.73kB (3146656 bits)
Date Submitted	2004-07-12 00:00:00
Date Available	2004-07-12 00:00:00
Creation Date	2004-07-12 14:29:50
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2004-07-12 14:29:50
Document Title	User Manual_myX-5-2_lu_en.pdf
Document Creator	PScript5.dll Version 5.2
Document Author:	PC-8726

18/03/04
17:02
SA
Page 1
Mobile Phones Division
Tel. +33 1 40 70 88 44 - Fax +33 1 40 70 66 40 - www.sagem.com
Le Ponant de Paris - 27, rue Leblanc - 75512 PARIS CEDEX 15 - FRANCE
SAGEM SA - Société anonyme à directoire et conseil de surveillance
capital : 36 405 229 € - 562 082 909 RCS PARIS
SAGEM
*251496749*
251496749_myX-5.2_LU-en.qxd
ENGLISH
251496749_myX5-2_lu_2e-3ecouv_en.fm Page 1 Vendredi, 30. avril 2004 11:19 11
You have just purchased a SAGEM phone, we congratulate you; it is
recommended that you read this handbook carefully in order to use your phone
efficiently and in the best conditions.
Your phone can be used internationally in the various networks (GSM 900 MHz
and DCS 1800 MHz or PCS 1900 MHz, depending on model) depending on the
roaming arrangements with your operator.
We remind you that this phone is approved to meet European standards.
WARNING
Depending on the model, network configuration and associated subscription
cards, certain functions may not be available.
Ensure that your SIM card is a 3 V SIM type that is compatible with your phone.
Inserting an incompatible card will be indicated by a message when your phone
is switched on. Contact your operator.
Your phone is identified by its IMEI number. Write this number down, and do not
keep it with your phone, because you may be asked for it in the event of your
phone being stolen, in order to prevent it from being used, even with a different
SIM card. In order to display the IMEI on your phone's screen, type: *#06#.
SAGEM is a trademark of SAGEM SA.
AT is a registered trademark of Hayes Microcomputer Products Inc.
Hayes is a registered trademark of Hayes Microcomputer Products Inc.
T9 is protected by one or more of the following US patents: 5,818,437,
5,953,541, 5,187,480, 5,945,928, 6,011,554 and other patents are being applied for
worldwide.
Java and all Java based trademarks and logos are trademarks or registered
trademarks of Sun Microsystems, Inc. in the U.S. and other countries.
The WAP navigator and some message softwares (i-mode) are under licence
Openwave.
The WAP navigator and the softwares included are the exclusive property of
Openwave. For this reason, it is forbidden to modify, translate, disassemble or even
decompile all or part of these softwares.
© 2003 GAMELOFT - All rights reserved - GAMELOFT is a registered trademark of
GAMELOFT S.A. - All rights reserved.
Wellphone™ and SmartCom™ are registered trademarks owned by SmartCom
SARL France.
251496749_myX5-2_lu_2e-3ecouv_en.fm Page 2 Vendredi, 30. avril 2004 11:19 11
Weight: 96 g
Size: 107 x 46 x 19 mm
Original battery: Lithium ion 920 mAh
Battery life calls/standby: up to 4 h 45 mn/370 h (see page 17 how to increase
the efficiency of your phone)
Multimedia objects supported:
Audio formats: iMelody, Midi, wave
Graphic formats: wbmp, bmp, png, gif, animated gif, jpeg, .3gp
Size of memory available for messages:
100 SMS
300 Kb for MMS (inbox, outbox and drafts together; MMS depending on
option)
Size of memory available for the phonenook and the multimedia objects: 4 MB
Maximum size of each message:
SMS < 160 characters
MMS < 100 Kb for outgoing, 100 Kb for incoming messages (depends
on the phone configuration and on the operator reservations)
Using temperature: from - 10°C to + 55°C
251496749_myX-5-2_lu_en.book Page 1 Vendredi, 30. avril 2004 11:01 11
Conformance Document
251496749_myX-5-2_lu_en.book Page 2 Vendredi, 30. avril 2004 11:01 11
FCC Conformance Document
FCC Part 24
Network
Health
NAPRD03.ver 2.11.2
Draft IEEE Std 1528-200x
Exposure to Radio Frequency Signals
- Your wireless handheld portable phone is a low power radio transmitter and receiver. When it is ON, it
receives and also sends out frequency (RF) signals.
- In August, 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with
safety levels for handheld wireless phones. Those guidelines are consistent with the safety standards
previously set by both U.S. and international standards bodies:
ANSI C95.1 (1992)*
NCPR Report 86 (1986)*
ICNIRP (1996)*
(*) American National Standards Institute; National Council on Radiation Protection and Measurements;
International Commission and Non-Ionizing Radiation Protection.
- Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature.
For example, over 120 scientists, engineers, and physicians from universities, government health agencies,
and industry reviewed the available body of research to develop the ANSI Standard (C95.1).
- The design of your phone complies with the FCC guidelines (and those standards).
- For body worn operation, this phone has been tested and meets FCC RF exposure guidelines when used
with an accessory that contains no metal and that positions the handset a minimum of 1.5 cm from the body.
Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
251496749_myX-5-2_lu_en.book Page 3 Vendredi, 30. avril 2004 11:01 11
Menus
Messages
See month
Inbox
See week
Outbox
See today
Sentbox
See date
Drafts
Calendar menu
Options
Memory
Local info.
Games
Call Voice Mail
Mailing Lists
WAP
Camera
Applications
ToDo
Organizer
Compose
Help
Phonebook
Contacts menu
Settings
Sounds
Display
Camera
Multimedia
Languages
Calculator
My Pictures
Calls
Converter
My Sounds
Security
Alarm
Memory
Networks
Timer
Help
Short cuts
Date/Time
Connectivity
Help
251496749_myX-5-2_lu_en.book Page 4 Vendredi, 30. avril 2004 11:01 11
Contents
Page 3
MENUS
Page 9
YOUR PHONE PACKAGE - ACCESSORIES
Page 10
DESCRIPTION
Programmable keys and Short cut keys
Necklace attachment
Page 12
NAVIGATION PRINCIPLES
Page 13
INITIAL SCREEN
Page 14
ACTIVATING YOUR PHONE
Information on the SIM card
Installing the SIM card and the battery
Getting started
Page 17
USING YOUR PHONE
Freeing the antenna
Increase the efficiency of your phone
Hands-free mode
Charging the battery
Page 19
PHONEBOOK
Using the phonebook
Storing a new contact
Contacts menu
Options from a contact saved
Sending a vCard
Receiving a vCard
251496749_myX-5-2_lu_en.book Page 5 Vendredi, 30. avril 2004 11:01 11
Contents
Page 25
MESSAGES
Compose SMS
Compose MMS
Receiving messages
Inbox
Outbox
Sentbox
Drafts
Sending options
Memory
Local information
Calling voicemail
Mailing list
Page 38
CAMERA
Take and send a photo
Page 40
MULTIMEDIA
My Pictures
Edit a photo
My Sounds
Memory
Page 43
WAP
The WAP Menu
Configuring WAP parameters
WAP Logging on
Downloading objects
WAP Logging off
GPRS
251496749_myX-5-2_lu_en.book Page 6 Vendredi, 30. avril 2004 11:01 11
Contents
Page 48
GAMES
Page 49
APPLICATIONS
Services
ToDo
ToDo menu
ToDo actions menu
Sending a vCal
Receiving a vCal
Exchange of data with a PC
Calculator
Converter
Alarm
Timer
Page 56
ORGANIZER
Calendar menu
Sending a vCal
Receiving a vCal
Page 58
SETTINGS
Sounds
Volume and ring tone
Vibrate
Silent mode
Beeps
Recorder
Display
Wallpaper
Screensaver
Operator logo
251496749_myX-5-2_lu_en.book Page 7 Vendredi, 30. avril 2004 11:01 11
Contents
Contrast
Energy saving
Camera
Languages
Calls
Call forward
View last calls
Counters
Display number
Call waiting
Automatic redial
Blacklist
Voicemail
ALS
Security
Keypad locking
PIN number
PIN2 number
Phone code
Confidentiality
Operator
Call barring
Fixed dialling
Cost
Networks
Short cuts
Date / Time
Set Date/Time
Automatic update
251496749_myX-5-2_lu_en.book Page 8 Vendredi, 30. avril 2004 11:01 11
Contents
Display
Time zone
Summer time
Connectivity
IrDA
Serial Speed
Car kit
WAP settings
Help
Page 81
CARE AND SAFETY INFORMATION
Safety
SAR
Advice for limiting exposure to radiofrequency (RF) fields
Page 83
WARRANTY
Page 86
END USER LICENCE AGREEMENT (EULA), FOR THE
SOFTWARE
Page 90
TROUBLESHOOTING
Page 94
INDEX
251496749_myX-5-2_lu_en.book Page 9 Vendredi, 30. avril 2004 11:01 11
Your phone package
When you open the box, check that all items are present:
1 - Phone
2 - Charger
3 - Battery
4 - User guide
5 - CD
(depending on model)
Accessories
You can also find (as an option) or order the following accessories:
Pedestrian kit (*)
Additional battery
Additional charger (*)
USB cable (with associated drivers) and serial cable to connect your phone to a PC
Cigar lighter charger (*)
Colored covers
(*) These accessories are identical to the ones provided for the earlier 3000 series and MYX-X.
251496749_myX-5-2_lu_en.book Page 10 Vendredi, 30. avril 2004 11:01 11
Description
Programmable keys
and Short cut keys
Hold down: Switch on/off
In a call context: Reject a call - hang up
In menus: Return to initial screen.
In call context: Call - receiving a call
OK
Microphone
Right programmable key: (Function available depending on model)
In initial screen: Access to certain functions (shortcuts)
In menus: Access to the selection shown on screen in the tab (*)
Left programmable key: (Function available depending on model)
In initial screen: Access to certain functions (shortcuts)
In menus: Access to the selection shown on screen in the tab (*)
Previous choice / increase value / up
During call: Increase volume
Next choice / reduce value / down
During call: Reduce volume
Up input field / move left
Down input field / move right
In initial screen: access to main menu.
In the menus: context-sensitive access to different functions.
During a call: take a call.
Press briefly and OK key: activate or deactivate keypad locking
In call reception mode: Short press stops ring tone
In ring tone setting mode: Activate / deactivate ring tone
Upper case/Lower case
Hold down: In initial screen: Silent mode
Zoom mode (see Messages and WAP menus)
(*) In this manual, when a function is chosen by pressing on this key,
square brackets are used (e.g.: [Save]).
10
251496749_myX-5-2_lu_en.book Page 11 Vendredi, 30. avril 2004 11:01 11
Description
Necklace attachment
Camera
Mirror
IrDA
Insert the necklace into the notch located in the
right bottom of the inside part of the phone.
11
251496749_myX-5-2_lu_en.book Page 12 Vendredi, 30. avril 2004 11:01 11
Navigation principles
These basic principles bring a great intuitiveness to your phone.
Validate by pressing the
key or the OK key.
Cancel by pressing the
key.
The thumbnails at the bottom of the screen refer to the
keys.
In the menus, a title bar reminds you of the previous level.
The T S navigation keys are used to navigate from one menu to
another within the same menu structure.
From the home page, pressing the T S W or X keys displays the
icons of the main menus.
The
key is used to go from a menu to a sub-menu.
The
key is used to go from a sub-menu to a menu.
The
key (press briefly) is used to go back to the initial screen
(current function is abandoned).
In some menus there is a Help menu (
icon) which informs you on
the various functions of the sub-menus.
12
251496749_myX-5-2_lu_en.book Page 13 Vendredi, 30. avril 2004 11:01 11
Initial screen
Network provider
The initial screen contains the following information:
1 - The title bar icons:
Battery
Calls forwarded
Call (establishing the call)
Call (hands free)
Message (reception of a message, message memory full)
FAX communication
DATA communication
Silent mode
Message in answering machine
WAP (@) communication
GPRS
Home zone
Roaming
Keypad locking
Protected WAP logon
Protected WAP logon icon with certificate
Signal strength level (5 bars).
2 - Date and time, in digital or analog mode
3 - Network provider
4 - Thumbnail centred on bottom line:
the main « Menu » thumbnail shows that the menu can be accessed via
the T S W or X keys.
The following information may also be displayed:
« 1 message received »; or « 1 call ».
They can be deleted by pressing
key briefly.
13
251496749_myX-5-2_lu_en.book Page 14 Vendredi, 30. avril 2004 11:01 11
Activating your phone
Information on the SIM card
To use your phone, you need a card called SIM card. It contains
personal information that you can modify:
Secret codes (PIN(s): Personal Identification Numbers), these codes
allow you to protect access to your SIM card and phone.
Phonebook,
Messages,
How special services work.
Your phone is compatible with the SIM 3V cards.
WARNING
This card must be handled and stored with care in order not to be damaged. If you should lose your SIM
card, contact your network provider or your SMC (Services Marketing Company) immediately.
Please keep your SIM card out of reach of young children.
14
251496749_myX-5-2_lu_en.book Page 15 Vendredi, 30. avril 2004 11:01 11
Activating your phone
Installing the SIM card and the battery
The SIM card is inserted under the phone's battery. Ensure that the
phone is switched off and the charger disconnected.
Turn the phone back and push lock button upwards.
Remove the back cover by lifting bottom end first.
Take out battery if already installed.
Slide the SIM card, with cut corner as shown on the phone, into the card
holder with fold face down.
Place the battery by positioning first the top of it, as shown on the
battery.
Replace the back cover, clicking in first the upper part then the lower and
pushing the back catch downwards into the lock position.
15
251496749_myX-5-2_lu_en.book Page 16 Vendredi, 30. avril 2004 11:01 11
Activating your phone
Getting started
When you switch on your phone for the first time, you must configure it
with various settings that will remain by default until you choose to
modify them (depending on model).
After entering your PIN code and the date and time, make your choice
for the following settings: time zone, daylight savings, skin, wallpaper,
screensaver, ring tone, volume, vibrate and voicemail number.
If there are contacts saved in your SIM card, you are invited, if you wish,
to copy them in the phone contacts memory.
16
251496749_myX-5-2_lu_en.book Page 17 Vendredi, 30. avril 2004 11:01 11
Using your phone
Freeing the antenna
The antenna is integrated in your phone, under the back cover at the top.
Avoid putting your fingers on this area when the phone is switched ON.
If your fingers obstruct the antenna, the phone may have to operate with
a higher power level than usual; decreasing its efficiency quickly. It could
also affect the quality of your communications.
Non ionising radiation
To obtain maximum satisfaction from your phone, use it in a vertical
position. Your personal safety can only be improved by doing so.
Increase the efficiency of your phone
- Don't press the keys when not necessary: each keypress activates
the backlight, and uses much power.
- Don't obstruct the antenna with your fingers.
Hands-free mode
During a call, press twice the
key or the OK key to switch into
hands-free mode.
WARNING: do not use the phone in hands-free mode near to your ear,
or you may suffer hearing loss.
17
251496749_myX-5-2_lu_en.book Page 18 Vendredi, 30. avril 2004 11:01 11
Using your phone
Charging the battery
Your phone is powered by a rechargeable battery. A new battery must
be charged for 4 hours at least before being used for the first time. It
reaches its optimum capacity after a few cycles of use.
When your battery has been discharged, the phone displays the state
(empty battery icon flashes). In this case recharge your battery for at
least 15 minutes before making any calls in order not to be cut off in the
middle of a call.
To recharge the battery:
Connect the charger to a socket.
Plug the end of the cable into the bottom connector of the phone.
The phone is then charging up. The battery icon is scrolling up and down
to indicate that it is charging. When the battery is fully charged, the
charging stops on its own. Disconnect the cable.
When charging, the battery may warm up, this phenomenon is normal.
WARNING
There is danger of explosion if the battery is placed in an incorrectly way or if it is exposed to fire.
Do not short circuit it.
The battery does not have any part that you can change.
Do not try to open the battery casing.
Use only the appropriate chargers and batteries as shown in the phone manufacturer's catalogue.
The use of other types of chargers or batteries may be dangerous or invalidate the warranty.
Used batteries must be disposed of in the appropriate places.
We advise you to take the battery out if you plan not to use the phone for extended periods.
You are strongly advised not to connect your phone to the charger if it doesn’t contain a battery.
The charger is a safety step-down transformer, it is forbidden to modify, alter or replace it by another
component (power supply plug, etc).
18
251496749_myX-5-2_lu_en.book Page 19 Vendredi, 30. avril 2004 11:01 11
Phonebook
The phonebook allows you to store numbers that you call regularly.
These numbers can be stored in the SIM card or in the phone.
To store a contact in the phone memory, the following fields can be filled:
last name, first name, numbers, email, URL, address, company,
comments, ringtone, photo.
The fields coloured with red are mandatory.
To store a contact in the SIM card, only the last name and number fields
must be filled.
The storage capacity will depend on the SIM card. Please contact your
network provider to get that information.
Using the phonebook
In the initial screen, press the T key to access the main menus. The
first menu proposed is Phonebook.
Press the OK key to enter the menu.
The list of your correspondents appears. By default, the cursor is
positioned on the first name in alphabetical order.
If you are using your phone and SIM card for the first time, the
phonebook list will be empty, only the Contacts menu function will be
available.
Different icons inform you of the position in the phonebook where the
contact is stored:
contact stored in the SIM card
contact stored in the phone
if the Fixed Dialling option is activated, only those contacts may
be called. See PIN number 2 and Fixed Dialling in Security
Menu for more details about this activation.
19
251496749_myX-5-2_lu_en.book Page 20 Vendredi, 30. avril 2004 11:01 11
Phonebook
Storing a new contact
Depending on the location where you want to store a new contact, select
Add phone contact to store it in the phone memory or Add SIM
contact to store it in the SIM card memory or in the Fixed Dialling (Fixed
Dialling is available depending on PIN number 2 options of your SIM
card).
Adding a contact in the SIM card memory
- Select the Contacts menu and press the OK key.
- Select Add SIM contact and press the OK key.
- Select SIM card or Fixed directory and press the OK key.
- Enter the last name and press the OK key.
- Enter the number and press the OK key.
- Press [Save] to store it.
Adding a contact in the phone memory
- Select the Contacts menu and press the OK key.
- Select Add phone contact and press the OK key.
- Enter the last name and press the OK key.
- Enter the number and press the OK key.
- Fill in other fields if you want.
- Press [Save] to store it.
20
251496749_myX-5-2_lu_en.book Page 21 Vendredi, 30. avril 2004 11:01 11
Phonebook
Contacts menu
Mailing lists
You can create a mailing list with contacts to whom you want to send
SMS or MMS.
- Select the Contacts menu and press the OK key.
- Select Mailing Lists and press the OK key. The phone asks you to
confirm the creation of a new list.
- Select the list type (SMS or MMS) and press the OK key.
- Enter a name and press the OK key.
- Then, on a list press [Options]. Select Add contact each time you
want to add a contact in the list.
Memory
Select Memory and validate. Select SIM or Phone and validate.
Phone: the screen displays the amount of memory used. The memory
capacity is shared between the phonebook and various other features.
If you lack memory, check if you can free some space from another
feature.
SIM: available memory only for contacts.
My numbers
You can create the entries corresponding to your own numbers in order
to consult them when necessary.
Select My numbers and validate. Enter the different details and
validate.
21
251496749_myX-5-2_lu_en.book Page 22 Vendredi, 30. avril 2004 11:01 11
Phonebook
Options from a contact saved
Displaying a contact
Select a contact from the list using the T S keys and press the
OK key. The name and the number are displayed.
Note: By directly pressing one character, the phone will display the first
contact saved in the phonebook, starting with it.
To display the different options, select a contact from the list using the
T S keys and press [Options].
Modify contact
Modify what you want and validate then select Save once the
modifications completed.
Copy to SIM / Copy to phone
This allows you to copy your phonebook entries from one memory to the
other. Only the name and the first phone number will be copied.
Delete
Validate deletion of entry.
Send message
To send a message (SMS or MMS) (see chapter Messages).
Send by
To send a message (SMS, MMS or by IrDA) (see chapter Messages).
22
251496749_myX-5-2_lu_en.book Page 23 Vendredi, 30. avril 2004 11:01 11
Phonebook
My numbers
(See page 21).
Memory
(See page 21).
Mailing lists
(See page 21).
Calling a contact
Several ways:
- Select a contact. Press the
key to start the call.
- Select a contact, press the OK key, his number is displayed, press
[Call] to start the call.
- Direct call from the initial screen: type the number with which the
contact was saved then
(example : 21
) or the number
then
, the number is displayed, confirm.
23
251496749_myX-5-2_lu_en.book Page 24 Vendredi, 30. avril 2004 11:01 11
Phonebook
Sending a vCard
It is possible to send a vCard from each contact stored in the phonebook.
vCards can be sent to another phone supporting vCard.
On a contact in the phonebook, please select the Send by option menu
item (SMS, MMS or IrDA).
If the vCard is sent successfully, an information message is displayed.
vCards can be sent as an attachment to an SMS or MMS message. See
Compose MMS on page 28.
Receiving a vCard
When a vCard is received enclosed to an SMS or MMS message, the
message « You have received 1 message » is displayed.
Open the MMS from the inbox. Press [Options] and select Extract;
select the vCard among the list of objects attached to this MMS, and add
this contact to the phonebook by pressing the OK key. A message is
displayed to confirm the action.
24
251496749_myX-5-2_lu_en.book Page 25 Vendredi, 30. avril 2004 11:01 11
Messages
From this menu, you are able to send SMS and MMS. MMS is a
Multimedia Message Service, which allows you to enclose audio files,
images and others rich contents to your messages; these messages can
even be composed of several slides. MMS are differently invoiced than
SMS are. Please contact your network provider to get more information
on their cost.
This menu has been compiled in collaboration with magic4™.
Compose SMS
On the Messages menu, please select the Compose menu and
validate. Choose the SMS option.
The language used is the one selected on the display of the phone (if
the language selected is not compatible with the Easy Message T9™,
the English language will be automatically selected).
When typing a text, a counter showing the number of characters
deducted is displayed at the top of the screen (depending on model).
This counter is not displayed if an icon or sound is inserted into the SMS.
When the text has been entered, [Options] is used to access the
functions offered:
Save is used to save a draft in memory
Send is used to send the message by entering the correspondent's
number or selecting it in the phonebook
T9 options (see page 26)
ABC mode (see page 27)
123 mode (see page 27)
Quit is used to delete all text entered and quit
Activate/deactivate zoom is used to modify size of characters
Formatting is used to enrich a text
Insert to insert an image or sound into your message (see page 28).
25
251496749_myX-5-2_lu_en.book Page 26 Vendredi, 30. avril 2004 11:01 11
Messages
The Easy Message T9™ mode helps you to easily write your short
messages.
Using T9 Mode
Press once the key corresponding to the letter chosen and compose the
word by continuing to press the keys corresponding to the various letters
without paying attention to the display: the word is highlighted.
If you agree on the word proposed on the screen, press the 0 key to
validate it (the 0 key inserts a space), and go on writing the next word.
However, the same sequence of keys pressed can correspond to
several words, existing on the dictionary. If the word that appears is not
the word you expected, press the TS keys to scroll through the words
corresponding to this key sequence.
Once you agree on the word proposed on the screen, press the 0 key to
validate it (the 0 key inserts a space), and go on writing the next word.
If the word you are expected is not proposed, please add characters until
you get the message Add the word? Press Yes and validate if the word
displayed suits you or modify this word before adding it in the dictionary.
26
251496749_myX-5-2_lu_en.book Page 27 Vendredi, 30. avril 2004 11:01 11
Messages
In the input screen, the
key is used to access other input options.
Input modes
When composing a message:
The navigation keys assume the
following functions:
- W key:
Last word
- X key:
Next word
- S key:
Previous line
- T key:
Next line
key:
Deletes last letter
key:
Message options
key (long press):
Zoom mode (changes size of
characters)
key (short press):
Access to symbol table
Editor mode: The ABC mode is used to write words that do not exist in
the dictionary. To get a particular character, please press the
corresponding key several times: the characters will scroll down on your
screen. Mode 123 is used to add numbers.
Insert mode is used to add symbols, animations, call group icons and
tunes. Images and sounds can be of two types: pre-defined or
customized. Pre-defined images and sounds are smaller, especially
suited to exchanging messages.
Upper case
A short press of the
key will display the next letter in upper case.
Two short presses on the
key allow you to switch to upper case
editing mode for the whole message. Two short presses again, switches
back to lower case.
Punctuation characters
Punctuation characters are obtained thanks to key 1 (except in
123 mode), or with the help of Insert mode (fast access by briefly
pressing the
key).
Accented characters
Accented characters are generated automatically in T9 mode.
In ABC mode accented characters are available by pressing the key
supporting the non-accented character in succession.
27
251496749_myX-5-2_lu_en.book Page 28 Vendredi, 30. avril 2004 11:01 11
Messages
Compose MMS
On the Messages menu, please choose the Compose menu and
validate. Select the MMS option.
When the text has been entered, [Options] is used to access the
functions offered:
Insert to insert multimedia objects such as images, animations and
sounds into your message.
T9 options (see page 26)
ABC mode (see page 27)
123 mode (see page 27)
Slide to compose a slideshow of the multimedia objects.
Preview to see a presentation of the multimedia objects.
Cancel is used to delete all text entered and quit
Saving the message
Select Save. It is saved in the Drafts menu.
Sending the message
- Once the text entered, press the OK key or press [Options] and
select Send.
- Enter the receiver’s number (or take it in your phonebook pressing
[Contacts]) and press the OK key.
You can enter an e-mail address.
Note: It is possible that the voice message format (.amr) is not
supported by some PC. See your PC provider.
Warning: some message sendings may fail if the message content is too
big.
28
251496749_myX-5-2_lu_en.book Page 29 Vendredi, 30. avril 2004 11:01 11
Messages
Pressing [Options] before sending the message gives access to
different options:
Send options: can be used to indicate the period of validity,
activate/deactivate a request delivery report, a priority, a delivery time or
a sender visibility.
Add mailing list: this option allows you to select a mailing list to which
the message is sent (see chapter Phonebook).
Add recipient: this option allows you to add another recipient.
ABC/123: this option allows you to modify the text before sending the
message.
Add subject: this option allows you to add a subject to the message.
29
251496749_myX-5-2_lu_en.book Page 30 Vendredi, 30. avril 2004 11:01 11
Messages
Receiving messages
When you receive a message, the phone plays the ring tone that you
selected, and the message icon
comes on the screen of your phone.
If you do not read the messages, this icon remains displayed on the
screen. When it flashes, the memory is full.
Receiving icons, backgrounds or tunes can take several seconds. An
icon is blinking when the download of your message is in progress.
Note that you have two different possibilities for receiving MMS:
automatically or manually; if « manual mode » is activated, then you will
receive only a notification in your Inbox, meaning that a MMS is available
on the MMS Server; select Retrieve in the options when you want to
retrieve the MMS from the server.
For more details about automatic and retrieval modes, see « Sending
options » on page 34.
Please contact your network provider to get more information on icons,
backgrounds or tunes downloading.
30
251496749_myX-5-2_lu_en.book Page 31 Vendredi, 30. avril 2004 11:01 11
Messages
Received messages are stored in the SIM card or in the phone until you
choose to delete them.
Inbox
On the Messages menu, please choose the Inbox menu and Select.
Each message shows the presence of any attachments, the time and
date the message was received and its size.
Messages are listed in chronological order, the latest one being
displayed first.
The quantity of Not Read and Not Retrieved messages is shown. Not
Retrieved and Not Read messages are shown in bold.
Select a message and press the OK key. Choose one of the options
given.
Enclosures (pictures or sounds), which you receive, can be extracted in
order to be used later on (stored…).
You can consult them in the corresponding menus (WAP bookmarks in
WAP, ring tones in Sounds, wallpapers in Display).
31
251496749_myX-5-2_lu_en.book Page 32 Vendredi, 30. avril 2004 11:01 11
Messages
Outbox
This menu displays the messages that failed to send. You can therefore
try to send them again.
Sentbox
The Sentbox menu is used to store all your sent messages if you
activated the option Store sent messages in the Options menu (see
page 34).
Too many messages saved will quickly fill up the available memory and
no further messages will be received.
For each message, its characteristics (shown with an icon) and the time
(or date) of sending are displayed on the screen.
Select a message and press the OK key.
Choose one of the options given: Read, Modify, Forward, Delete, Delete
all.
32
251496749_myX-5-2_lu_en.book Page 33 Vendredi, 30. avril 2004 11:01 11
Messages
Drafts
When you store a composed message, it is stored among the drafts.
On the Messages menu, please choose the Drafts menu and press the
OK key.
Select a message and press [Options]. The options are: Delete, Read,
Modify, Details.
If you select a message and press the OK key, you can modify it.
If you want to send it, select Modify then press [Options] and select
Send.
33
251496749_myX-5-2_lu_en.book Page 34 Vendredi, 30. avril 2004 11:01 11
Messages
Sending options
Several sending options are offered.
On the Messages menu, please choose Options and Select.
Choose one of the options given: SMS or MMS.
The SMS sending options are: message centre number, store sent
message, acknowledgment, reply given, period of validity (during that
period, the network provider will try to send the message), message
format.
The MMS options are:
- Store sent messages: (it is highly recommended that you keep this
function deactivated, in order to avoid a full memory),
- Retrieval mode: if you are in a poor coverage area, it may be more
convenient to choose the manual retrieval mode which gives you the
retrieve later option.
- Priority: selection of a priority to send a message.
- Request delivery report: request of a delivery report when sending
a message.
- Period of vailidty
34
251496749_myX-5-2_lu_en.book Page 35 Vendredi, 30. avril 2004 11:01 11
Messages
Advanced settings:
Send delivery report: sending a delivery report when receiving a
message.
MMS ignore: if you want to deactivate the reception of any MMS in your
phone.
MMS server: to select another MMS provider, or set the parameters of
a new MMS provider.
Sender visibility: you choose to display or not your phone number on
the receiver’s phone screen, with that message.
Maximum size
Memory
You may know the memory available for saving messages.
On the Messages menu, please select the Memory option and Select.
Choose one of the options given: SMS or MMS.
The SMS screen displays the memory available either on the SIM card
or on the phone.
The MMS screen displays how much memory is used in Kbytes.
35
251496749_myX-5-2_lu_en.book Page 36 Vendredi, 30. avril 2004 11:01 11
Messages
Local information
This menu is used to activate reception of local information broadcast by the
network.
You can choose whether you want to receive this information or not
(please contact your network provider).
On the Messages menu, please select the Local info. menu and
Select.
Calling voicemail
This function allows you to call your voicemail.
On the Messages menu, please select the Call Voice Mail option and
Select.
Note: if your voicemail number has not been entered yet, you must enter
it in the menu Settings/Calls/Voicemail.
36
251496749_myX-5-2_lu_en.book Page 37 Vendredi, 30. avril 2004 11:01 11
Messages
Mailing list
This menu displays the mailing lists created in the phonebook.
To display the different options, press [Options].
- Properties: allows you to see the type of mailing list and the number
of contacts.
- Delete: allows you to delete the mailing list.
- Send message: allows you to compose and send a message to the
contacts of the mailing list.
- Add mailing list: allows you to create a new mailing list.
- Modify name: allows you to modify the mailing list name.
- Add contact: allows you to add a contact to the mailing list.
37
251496749_myX-5-2_lu_en.book Page 38 Vendredi, 30. avril 2004 11:01 11
Camera
This menu allows you to take photos and use them for different
purposes. For instance, you can send them to another phone or an
Internet address, store them, use them as wallpapers or screen
savers…
Take and send a photo
Before taking a picture, some features need to be set. See the
Settings/Camera menu.
From the initial screen, press T or S to display the main menu and
select the Camera menu.
The camera is now on. Look into your phone display and position your
subject. Move your phone to position your photo.
Before taking a picture, there are various adjustment settings:
- To activate one of the three available zoom levels, use the
T S keys.
- You can set the photo layout (landscape or portrait) using the X key.
- You can set the luminosity using the W key:
: in case of neon or halogen lighting,
: outdoor,
: low
luminosity.
- To take a picture with a 5, 10 or 15 second time delay, press [Timer].
Taking and/or sending a picture
- Press OK, the photo is taken and stays on the phone display.
Warning: if you press [Back], you will go back to the previous screen
and lose the photo you have just taken.
- Press OK if you want to send the photo immediately.
- Press [Save] to save your photo and display the different options (see
next page).
38
251496749_myX-5-2_lu_en.book Page 39 Vendredi, 30. avril 2004 11:01 11
Camera
If there is not enough memory to save the photo, a warning message
appears, prompting you to confirm whether you want to go on.
Once taken, the photo appears on the phone display. The name is made
up with a number.
Note: using the camera during a call may disturb the call quality.
The options are:
- New...: allows you to take a new photo,
- Rename: allows you to modify the name of a photo,
- Send by: allows you to send the photo by MMS or IrDA (see the
Message menu).
- Editor: various options to modify a photo (see chapter Multimedia,
part Edit a photo).
- PlanetSagem: photos that have been taken can be saved onto a PC
through a cable or IrDA using the MPAS (My Pictures And Sounds)
utility which can be downloaded from www.planetsagem.com.
- Add to contact: allows you to assign a picture to a contact saved in
the phonebook.
Select one of the options with the T S keys and validate.
39
251496749_myX-5-2_lu_en.book Page 40 Vendredi, 30. avril 2004 11:01 11
Multimedia
This menu gives you easy access to your favourite photos, pictures and
sounds.
My Pictures
This menu gives you access to your pictures.
On the Multimedia menu, please select the My Pictures menu and
Select.
The pictures stored are displayed on the screen. Please, use the
T S keys to select one of them.
Once you have selected a picture, press [Options].
Select one of the options in the list with the T S keys and validate.
- Use as: allows you to use the picture as a wallpaper or screen saver.
- Delete: allows you to delete a picture.
- Delete all: allows you to delete all pictures.
- Rename: allows you to rename a picture.
- Send by: makes it possible to transmit a picture (NB: you may not
send any copyrighted picture).
You can import or export pictures to or from a computer using My
Pictures And Sounds (MPAS), available from www.planetsagem.com.
Properties: properties of the picture selected.
New photo: allows you to take a new picture.
The Pictures menu allows you to delete all the pictures or to take a new
photo.
40
251496749_myX-5-2_lu_en.book Page 41 Vendredi, 30. avril 2004 11:01 11
Multimedia
Edit a photo
On the Multimedia menu, please select the My Pictures menu and
Select. Select a photo and the Editor option, the Editor menu appears.
Select one of the edit functions with the T S keys and validate:
- Sepia: allows you to change colors into sepia,
- Zoom: allows you to magnify certain parts of your photo,
- Adjustment: allows you to improve contrast,
- Emboss: allows you to modify a photo with an embossed grey tint,
- Negative: allows you to change a photo into negative,
- Grey Scale: allows you to change color into black and white,
- Add mark: allows you to add special characters or drawings to your
photo,
- Add frame: allows you to surround your photo with a frame,
- Contrast: allows you to increase or decrease the contrast of your
photo,
- Sharpen: allows you to sharpen a photo,
- Blur: allows you to add blur to a photo.
41
251496749_myX-5-2_lu_en.book Page 42 Vendredi, 30. avril 2004 11:01 11
Multimedia
My Sounds
This menu gives you access to your sounds.
To access your sounds, use the same procedure as for your pictures
(see the My Pictures menu).
You can import or export sounds to or from a computer using My
Pictures And Sounds (MPAS), available from www.planetsagem.com.
Memory
This menu indicates the memory size used by the different features of
your phone.
On the Multimedia menu, please select the Memory menu and Select.
Use the T S keys to select the different features using memory. You
can see the memory capacity used by each individual feature.
42
251496749_myX-5-2_lu_en.book Page 43 Vendredi, 30. avril 2004 11:01 11
WAP
WAP (Wireless Application Protocol): a protocol that translates the
Internet language into WML and HTML languages that can be read by a
phone. The WAP function allows you to log onto certain Internet sites.
You can log onto sites that allow you to download ringtones, icons,
animated screensavers, JavaTM applications to your phone.
The WAP Menu
The WAP navigator is under
licence:
The WAP navigator and the
softwares included are the
exclusive property of Openwave.
For this reason, it is forbidden to
modify, translate, disassemble or
even decompile all or part of
these softwares.
You can activate the
magnifying glass to increase
the size of the characters by
holding down the
key.
The Services menu, a dropdown menu, can be accessed at all times
when navigating through WAP pages pressing the
key.
It contains the following sub menus:
Welcome: logs onto the home page, (carries the name of your access
provider)
Bookmarks: is used to save in a phonebook the names and addresses
of Internet sites in order to make the access easy.
You can receive bookmarks from messages and add them to this list
(see chapter on SMS).
You can also send messages by SMS: select a bookmark, press
[Options], then select Send by message.
Go to URL: this menu allows you to input an Internet address directly.
Inbox: this menu allows you to check the messages sent by the Internet
site.
Save items: is used to save a WAP site items.
Snapshots: takes a snapshot of the currently displayed page.
History: backward and forward navigation of the pages displayed are
kept in memory.
Reload: refreshes the current page.
Reset cache: clears the stored information on previous connections.
43
251496749_myX-5-2_lu_en.book Page 44 Vendredi, 30. avril 2004 11:01 11
WAP
Advanced…: choose one of the following advanced settings
- Settings
- Show URL
- Disconnect
- Circuit prompt (if user wants to confirm each logon)
- Security (is used to access information on making WAP connections
secure).
- Delete Cookies
- View Title Region
About…: information on the browser.
Exit: returns to the phone's home page.
Configuring WAP parameters
Select the Advanced… menu, then the Settings menu.
Profiles is used to select or modify your access provider's logon
parameters or configure the parameters of other access providers.
The active access service is preceded with a star.
The Menu is used to add a new profile or to display the memory size
available.
Configuration of GSM and GPRS parameters:
All information to be entered in the parameters are provided by your
operator or access provider.
On a profile in the list, press [Options], select Modify. The different
parameters are: Provider title, Home page, Preferred connections (see
next page), GSM parameters and GPRS parameters (see next page).
44
251496749_myX-5-2_lu_en.book Page 45 Vendredi, 30. avril 2004 11:01 11
WAP
Preferred connections:
GSM if not GPRS (by default): the logon to WAP services uses the
GPRS as a priority. However, in the event of unavailability of the GPRS
network, the GSM network is used to establish the link.
GPRS: the logon to WAP services uses the GPRS network exclusively.
GSM: the logon to WAP services uses the GSM network exclusively.
GSM parameters:
- Login
- Password
- IP address of WAP gateway
- Port type (secure or insecure)
- Dial-up number
- Mode (digital, analog or automatic)
In automatic mode access can be gained to the operator's network by a
digital link and an analog link to a different network (in roaming).
GPRS parameters:
- Login
- Password
- IP address of WAP gateway
- Port type (secure or insecure)
- APN: if no APN has been defined, press [Options] then the APN
menu. Select or add an APN.
Once all the settings have been entered, you can activate the chosen
access provider. Select him from the list. Validate your choice.
Linger timer is used to choose the time after which the call is
automatically disconnected if you have forgotten to log off from a
service.
45
251496749_myX-5-2_lu_en.book Page 46 Vendredi, 30. avril 2004 11:01 11
WAP
WAP Logging on
The connection to a WAP service
on the GPRS network is not cut if
an incoming call is received. You
can answer the call.
Using the Welcome menu, you can log onto your access provider's
WAP site by pressing the
key.
If you are logging onto the GSM or GPRS network, the @ symbol
flashes, the metering of the cost of the call starts as soon as it stops
flashing.
Downloading objects
Some WAP sites allow you to download ringtones, icons, animated
screensavers, games or JAVATM applications. Once downloaded, they
are stored in your phone's memory. You can then save them in your
phone (same operation as used for downloading using messages).
WAP Logging off
To log off, press the
key. The logoff happens automatically after a
few seconds of inactivity if you forget to log off. This period is defined by
the linger time setting.
46
251496749_myX-5-2_lu_en.book Page 47 Vendredi, 30. avril 2004 11:01 11
WAP
GPRS
A flashing icon indicates that the phone is logging onto a GPRS network.
A non-flashing icon indicates that the GPRS network is available; if the
icon is dark, it indicates that the phone is logged onto the GPRS
network: see page 44 for the attachment options.
This icon is not displayed if the GPRS network is not available or if the
SIM card inserted in your phone does not include the GPRS service. It
may also disappear when accessing WAP services if the connection
uses the GSM network instead of the GPRS network.
47
251496749_myX-5-2_lu_en.book Page 48 Vendredi, 30. avril 2004 11:01 11
Games
The games being designed by Java™, many compatible games can be
downloaded in your phone.
The More games function allows you to download games connecting on
a remote server.
Depending on the operator, the connection URL may not be present. To
add a new URL, go to Settings/Connection/Menu/Add.
Delete all menu: deletes all the games you have downloaded.
48
251496749_myX-5-2_lu_en.book Page 49 Vendredi, 30. avril 2004 11:01 11
Applications
The Java™ function allows you to download applications and utilities in
your phone.
Downloading is done through the WAP function.
Please go to the Applications menu to use the applications already
installed or install others.
Services
This item may not be present on your phone’s menu, as it depends on
your SIM.
ToDo
ToDo menu
This menu allows you to add ToDo’s, access category-based Todo
management and delete all the ToDo’s.
On the Applications menu, please select ToDo then the ToDo menu
and press [Options].
Select one of the actions in the list with the T S keys and validate.
- Add written/vocal ToDo: allows you to add ToDo of the text or voice
type. Fill in the different items. Save the ToDo.
- Memory: allows you to view the memory used by the different
functions of your ToDo.
- Categories: allows you to see the different ToDo categories, assign
a specific ring tone to each individual ToDo, know the number of
ToDo’s in each category and see them.
- Delete all: allows you to delete all the ToDo’s from your ToDo.
49
251496749_myX-5-2_lu_en.book Page 50 Vendredi, 30. avril 2004 11:01 11
Applications
ToDo actions menu
50
This menu allows you to do all the actions possible on any ToDo.
- On the Applications menu, please select ToDo.
- To display a ToDo, select it in the list and press the OK key.
- To display the different options, press [Options].
Delete: allows you to delete the ToDo.
Modify ToDo: allows you to modify the ToDo properties.
Send by IrDA: allows you to send the Vcalendar corresponding to the
task by IrDA.
Add written ToDo/Add vocal ToDo: allows you to create a new
ToDo.
Memory: allows you to view the memory used by the different
functions of your ToDo.
Categories: allows you to see the different ToDo categories, assign
a specific ring tone to each individual ToDo, know the number of
ToDo’s in each category and see them.
251496749_myX-5-2_lu_en.book Page 51 Vendredi, 30. avril 2004 11:01 11
Applications
Sending a vCal
You can send a vCal from each Todo task. Yet, this function is available only
on certain models of phone.
You can send vCals to another phone using MMS or IrDA depending on
your phone and the recipient’s phone.
On the task list (Todo main menu), please select a task and in the Todo
task actions menu list select Send.
Then choose between MMS or IrDA for the type of sending and confirm.
When sending MMS, please select your contact information (phone
number or Email address) before confirming.
If you receive a call while you are sending a vCal, the call will have
precedence.
Receiving a vCal
The vCal receipt mode differs with the type of delivery:
- By MMS, you receive a message you have to open to extract the vCal.
You cannot add the event to your diary until you have saved it.
- By IrDA or serial link, you receive a message and when the download
is completed, a message appears on your phone display, asking you
what you want to do with the vCal (save it, delete it…).
You can assign a different beep to each Todo task.
You can also assign a different ring tone to each Todo task category.
51
251496749_myX-5-2_lu_en.book Page 52 Vendredi, 30. avril 2004 11:01 11
Applications
Exchange of data with a PC
Working from a PC, you can save/edit contacts, events and tasks stored
in your phone.
To do this, you will need:
- either to connect your phone to the PC by means of a suitable data
cable (serial or USB),
- or to use the infrared function on your phone (please refer to the
Connectivity paragraph in the Settings Chapter).
Next, you will have to install the Wellphone software supplied with your
phone or available from http://www.wellphone.com. This software will
also enable you to save your contacts, events and tasks by means of
copy/paste.
Working from a PC, you can save/edit photos and ring tones not
copyrighted stored in your phone.
To do this, you will need:
- either to connect your phone to the PC by means of a suitable data
cable (serial or USB),
- or to use the infrared function on your phone (please refer to the
Connectivity paragraph in the Settings Chapter).
Next, you will have to install the "My Pictures and Sounds" software
(available from www.planetsagem.com site).
Remark: If a call comes in during an exchange of data with your PC, the
link will be interrupted and will have to be manually re-started.
52
251496749_myX-5-2_lu_en.book Page 53 Vendredi, 30. avril 2004 11:01 11
Applications
Calculator
This menu allows you to use your phone as a calculator.
On the Applications menu, please select the Calculator menu and OK.
You can use the calculator thanks to the following keys:
Up key: Add
Down key: Subtract
Right key: Multiply
Left key: Divide
Left programmable key: Equals or convert
Right programmable key: Delete
∗ key or #: Decimal point.
If no calculations are being run, pressing [Convert] allows you to use the
value in the converter directly.
53
251496749_myX-5-2_lu_en.book Page 54 Vendredi, 30. avril 2004 11:01 11
Applications
Converter
This menu allows you to convert one currency to another.
On the Applications menu, please select the Converter menu and OK.
Enter a value and press the S key to convert from one currency to
another, or the T key to convert back.
Pressing [Options] allows you to use the following options:
Rapid exchange
If the Rapid exchange is activated, the converter will work in the initial
screen by entering the desired numbers and pressing the S T keys to
convert.
Exchange rate
Enter the exchange rate corresponding to the chosen currency.
Currency
Enter the two types of currency to be converted.
Go to calculator
This option allows you to use immediately the value converted in the
calculator.
54
251496749_myX-5-2_lu_en.book Page 55 Vendredi, 30. avril 2004 11:01 11
Applications
The alarm works even when the phone is switched off.
Alarm
This menu allows you to set and activate the alarm.
On the Applications menu, please select the Alarm menu and OK.
Activate or Deactivate the alarm and validate.
Set the wake-up time by entering the numbers directly or using the
T S keys and validate.
The alarm icon appears on the initial screen.
Timer
This menu is used to set and activate the timer.
On the Applications menu, please select the Timer menu and OK.
Activate or Deactivate the alarm and validate.
Set the duration (hours/minutes) by entering the numbers directly or
using the T S keys and validate.
The alarm icon appears on the initial screen.
55
251496749_myX-5-2_lu_en.book Page 56 Vendredi, 30. avril 2004 11:01 11
Organizer
This menu gives you access to your diary and get to a day, week, month or
specific date. It lets you add events, access the global actions for all the
events and manage them by event category.
Calendar menu
This menu lets you add events, manage events by category, see the available
memory and delete all the events.
From the Organizer menu, select the Calendar menu.
- Categories: allows you to see the different event categories, assign
a specific ring tone to each individual category, know the number of
events in each category and see them.
- Add written event/Add vocal event: allows you to add events of the
text or voice type. Fill in the different items. Save the event.
- Clean-up: allows you to schedule the deletion of events that took
place more than one day, week or month ago.
- Memory: allows you to view the memory capacity used by the
different functions of your diary.
- Delete all : allows you to delete all the events from your diary.
The other menus are:
- See date: allows you to access events at a specific date.
- See today: allows you to access the events for the current day and
the actions possible on any event (see, modify, delete and send).
- See week: allows you to access events on a week-by-week basis.
- See month: allows you to access events on a month-by-month basis.
56
251496749_myX-5-2_lu_en.book Page 57 Vendredi, 30. avril 2004 11:01 11
Organizer
Sending a vCal
You can send a vCal from each diary event. Yet, this function is available only
on certain models of phone.
You can send vCals to another phone using MMS or IrDA depending on
your phone and the recipient’s phone.
On the See today list, please select an event and in theTodo event
actions menu list, select Send.
Then choose between MMS, IrDA or serial link for the type of sending
and confirm.
For MMS deliveries, you should in addition select your contact
information (phone number or Email address) before confirming.
If you receive a call while you are sending a vCal, the call will have
precedence.
Receiving a vCal
The vCal receipt mode differs with the type of delivery:
- By MMS, you receive a message you have to open to extract the vCal.
You cannot add the event to your diary until you have saved it.
- By IrDA or serial link, you receive a message and when the download
is completed, a message appears on your phone display, asking you
what you want to do with the vCal (save it, delete it…).
You can assign a different beep to each diary event.
You can also assign a different ring tone to each diary event category.
57
251496749_myX-5-2_lu_en.book Page 58 Vendredi, 30. avril 2004 11:01 11
Settings
This menu allows you to set your phone.
Sounds
This menu allows you to customize the ring tones on your phone and to
activate beep and vibrate modes.
Volume and ring tone
This menu allows you to allocate a ring tone to each type of event.
On the Sounds menu, please select the Ring tones menu and [Select].
Select one of the events given: Alarm, Calls, Messages, Local Infos and
Fax and validate.
Select the ring tone from the proposed list and validate.
Adjust the volume using the T S keys and validate.
You can deactivate the sound by pressing the
key.
Vibrate
This menu allows you to activate the vibrate mode for calls.
On the Sounds menu, please select the Vibrate menu and [Select].
Select the vibrate mode from the proposed choices and validate.
58
251496749_myX-5-2_lu_en.book Page 59 Vendredi, 30. avril 2004 11:01 11
Settings
Silent mode
This menu allows you to switch to Silent mode.
On the Sounds menu, please select Silent mode and [Select].
Activate or deactivate Silent mode and validate.
Silent mode can also be accessed via the initial screen by holding down
the
key.
When the phone is in silent mode, the relevant icon appears on the
initial screen.
In this mode, the ring tone will not function, except for the alarm clock.
Note: if you have activated the silent mode, it does not remain after
switching off your phone.
Beeps
This menu allows you to activate a beep for each type of event.
On the Sounds menu, please select the Beeps menu and [Select].
Select the type of beep you want to allocate from the proposed choices
(Key beep, Network beep or Battery beep) and validate. Activate or
deactivate the beep and validate.
If you select key beeps, different options are given.
59
251496749_myX-5-2_lu_en.book Page 60 Vendredi, 30. avril 2004 11:01 11
Settings
Recorder
These menu allows you to record you own melody.
On the Sounds menu, please select the Recorder menu and [Select].
Pressing [Start] record your melody or your voice by means of the
microphone then save it.
Give it a name and validate. The new tone is saved in the list of ringtones
and in Multimedia/My Sounds.
If you select the recorder by means of a programmable key, the sound
is saved in the Applications/ToDo menu.
Display
This menu allows you to customize your screen by choosing a different
presentation.
This menu allows you to choose the skin of your phone, i.e. define its
look (text font, colors, default animation, background image…).
On the Display menu, please select Skins.
Select the desired skin and validate.
Skins are not downloadable but you can download screensavers and
boot mode animations without changing those included by default with
the skin.
60
251496749_myX-5-2_lu_en.book Page 61 Vendredi, 30. avril 2004 11:01 11
Settings
Wallpaper
This menu allows you to display the background picture you want on
your phone.
On the Display menu, please select the Wallpaper menu and [Select].
Select the wallpaper and [Visualise]. The picture appears in the
background of the screen.
Press [OK] to validate this choice, or [Back] to go back to choice.
Note: the Diaporama option allows you to display a wallpaper scrolling
different pictures in a random way.
Screensaver
This menu allows you to display an animation when the phone is in
standby mode.
On the Display menu, please select the Screensaver menu and
[Select].
Select one of the screensavers given and [Visualise].
The chosen screensaver appears on the screen, validate it.
61
251496749_myX-5-2_lu_en.book Page 62 Vendredi, 30. avril 2004 11:01 11
Settings
Operator logo
This menu allows you to display your operator's logo on the initial
screen.
On the Display menu, please select the Operator logo menu and
[Select].
Select Activate or Deactivate and press OK.
Contrast
62
This menu is used to adjust screen contrast.
On the Display menu, please select the Contrast menu and [Select].
Adjust the contrast usings the Up S or Down T keys.
251496749_myX-5-2_lu_en.book Page 63 Vendredi, 30. avril 2004 11:01 11
Settings
Energy saving
This function is used to deactivate the screen and the keypad backlight
and consequently increase the battery life of your phone.
On the Display menu, please select the Energy saving menu and
[Select].
For Backlight two options are available: screen only and Full backlight.
The screen goes out (standby mode).
To quit this mode, press the
key.
63
251496749_myX-5-2_lu_en.book Page 64 Vendredi, 30. avril 2004 11:01 11
Settings
Camera
This menu allows you to set the camera features of your phone.
On the Settings menu, please select the Camera menu and [Select].
Timer: this menu enables you to take a photo with a 5, 10 or 15 second
time delay. During preview of the photo, activate the delayed exposure
by pressing on the button
. (NB: if you want to take the photo
immediately, then press on the Photo button).
Click sound: This menu allows you to select the sound you will hear
when taking a photo.
Photo format: This menu allows you to choose the format in which your
photo will be saved. There are several options:
- either you systematically set the photo format to one of the following:
High resolution or Mobile format,
- or you can choose the photo format on a case-by-case basis.
Languages
This menu allows you to choose your phone's display language.
On the Settings menu, please select the Languages menu and
[Select].
Select your language and validate.
If you select Automatic, the language used will be the one relative to
your SIM card.
64
251496749_myX-5-2_lu_en.book Page 65 Vendredi, 30. avril 2004 11:01 11
Settings
The Calls menu allows you to manage all the calls functions (call
forward, displaying numbers, call waiting, voicemail number, etc.).
Calls
Call forward
Depending on your subscription, this service allows you to forward
incoming calls to a different number or to the voice mailbox.
On the Calls menu, please select the Call forward menu and [Select].
Choose the type of forwarding you want from the options available.
View last calls
This menu allows you to access the list of last numbers used.
On the Calls menu, please select the View last calls menu and
[Select].
For every phone call are displayed on the screen:
- its characteristics (shown with an icon),
- the time (or date),
- its duration.
Select a call from the list and validate.
Select one of the options given: Call, Store in your phonebook, Send a
message, Delete, Delete all.
You can also make the call by pressing the
key.
Fast access to the list of calls from the initial screen: press the
key.
65
251496749_myX-5-2_lu_en.book Page 66 Vendredi, 30. avril 2004 11:01 11
Settings
Counters
This menu allows you to consult the duration of the up calls.
It can also be used to check the volume of data exchanged in GPRS.
On the Calls menu, please select the Counters menu and [Select].
Select one of the options given.
Display number
This menu allows you to modify the status of the display number
function.
On the Calls menu, please select the Display number menu and
[Select].
Select one of the options given: Anonymous mode, My number, Callers’
number.
Anonymous mode
You have the facility to mask your number on the phone of the person
you are calling.
Preset: network default mode.
No: you choose not to activate anonymous mode and then to display
your number.
Yes: you choose to active anonymous mode and then not to display your
number.
66
251496749_myX-5-2_lu_en.book Page 67 Vendredi, 30. avril 2004 11:01 11
Settings
During a call, you may be informed that a caller is trying to reach you:
you hear a special tone. The caller's identity is displayed on the screen
(name or number).
Call waiting
(Operator-dependent service)
On the Calls menu, please select the Call waiting menu and [Select].
You can activate, deactivate, or consult the status of the call waiting
service in order to check if it is active or not.
During a call, if a second caller tries to contact you, the screen displays
the call warning.
Automatic redial
This menu allows you to call back a caller you have not managed to
reach.
On the Calls menu, please select the Auto redial menu and [Select].
You can set the redial function to inactive, on request or systematic.
If you choose On demand, your phone will offer to redial your caller
automatically if his number is busy.
67
251496749_myX-5-2_lu_en.book Page 68 Vendredi, 30. avril 2004 11:01 11
Settings
Blacklist
The blacklist is used to limit failures on automatic calls (calls generated
by the automatic redial function or by applications: data, fax for
example).
On the Calls menu, please select the Blacklist menu and [Select].
When several automatic calls failed with a number (number busy or
unknown), this number is put in the blacklist and no automatic call will
be done with this number any more until you delete it from the blacklist.
Note: this function does not apply to the calls performed manually.
Voicemail
This function is used to record your answer phone number.
This number will be used during a call to the voice mailbox using the
programmable keys.
On the Calls menu, please select the Voicemail menu and [Select].
Enter your answer phone number and validate.
ALS
The ALS (Alternate Line Service) function allows you, depending on
your subscription, to have two phone lines.
The number of the line selected (1 or 2) for the calls appears on the initial
screen.
68
251496749_myX-5-2_lu_en.book Page 69 Vendredi, 30. avril 2004 11:01 11
Settings
Security
This menu allows you to configure your phone's security settings.
Keypad locking
This menu allows you to lock the keypad to avoid unwanted key presses.
On the Security menu, please select the Keypad locking menu and
[Select].
Select Activate or deactivate and validate.
The lock icon appears on the initial screen.
This function is also available in the initial screen pressing the
and OK keys.
PIN number
This menu allows you to activate and modify your phone's PIN.
On the Security menu, please select the PIN number menu and
[Select].
To modify the PIN, select Modify and [Select].
Enter old PIN and validate.
Enter new PIN twice and validate.
To activate or deactivate the PIN, select the Check PIN menu and
[Select].
Enter PIN and validate.
Select Activate or Deactivate and validate.
69
251496749_myX-5-2_lu_en.book Page 70 Vendredi, 30. avril 2004 11:01 11
Settings
PIN2 number
You have a second PIN number to allow you to access certain
functions*.
* These functions may or may not be available depending on your SIM
card.
Proceed as above in order to activate, deactivate or modify PIN number
2 of your phone.
Phone code
The Phone code menu allows you to activate the phone code so that it
is requested and checked whenever the phone is switched on if a
different SIM card is used. This code is automatically linked to the SIM
card installed when the phone is activated, for example to protect the
phone if stolen.
To activate or deactivate the phone code, select the Phone code menu
and validate.
Enter 0000 (the factory code, by default) and validate.
Select Activate or Deactivate and validate.
To modify the phone code, select Modify and validate.
Enter old phone code and validate.
Enter new phone code and validate.
Enter phone code again to confirm it and validate.
70
251496749_myX-5-2_lu_en.book Page 71 Vendredi, 30. avril 2004 11:01 11
Settings
The Confidentiality function is used to delete numbers stored in View
last calls and the SMS stored in the memory when a new SIM card is
inserted into the phone.
Confidentiality
This menu allows the activation of automatic deletion, after power off/on,
for messages and/or calls stored in the phone.
On the Security menu, please select the Confidentiality menu and
[Select].
Select Activate or Deactivate and validate.
Operator
This menu allows you to modify the call barring.
On the Security menu, please select the Operator menu and [Select].
Access to this service depends on your type of subscription.
71
251496749_myX-5-2_lu_en.book Page 72 Vendredi, 30. avril 2004 11:01 11
Settings
Call barring can be applied to ALL calls (incoming and outgoing), to all
incoming calls when you are away from your home country (if roaming
available).
Call barring
This menu allows you to block the sending or reception of certain calls.
Before you can use this service, a password will be provided by your
operator when you take out your subscription.
On the Security menu, please select the Call barring menu and
[Select].
Select Activate or Deactivate and validate.
Access to this service depends on your subscription type.
Fixed dialling
This menu allows you to restrict the outgoing calls.
The availability of this menu depends on your SIM.
On the Security menu, please select the Fixed dialling menu and
[Select].
Enter PIN2 number and validate.
Select Activate or Deactivate and validate.
Proceed as for any other phonebook.
When activating this function, only the numbers stored in the phonebook
can be called.
This phonebook is linked to the SIM card, and its size depends on the
card's capacity.
72
251496749_myX-5-2_lu_en.book Page 73 Vendredi, 30. avril 2004 11:01 11
Settings
Cost
Networks
This menu allows you to control the cost of your calls (*).
On the Security menu, please select the Cost menu and validate.
The Cost menu (*) lets you check the cost of the last call you made and
of all the calls you made since you last deleted them.
The Delete costs menu (*) lets you delete the cost of your last call and
reset the cost counter after entering your PIN 2 code.
(*) WARNING
Depending on how the networks and associated subscription cards are
configured, some functions may be unavailable (these are marked out
with *).
This menu allows you to configure network preferences.
On the Settings menu, please select the Networks menu and [Select].
Choose Preferred to view all the pre-registered networks.
Choose Selection to activate (automatically or manually) one of the
networks accessible in the area in which your are located.
Choose Network type to select your network: GSM-DCS or PCS
(depending on model).
Choose GPRS to select the way you want to be attached on the GPRS
network: always, or only when needed (when launching a data
connection).
73
251496749_myX-5-2_lu_en.book Page 74 Vendredi, 30. avril 2004 11:01 11
Settings
Short cuts
This menu allows you to allocate functions to the programmable keys.
(Function available depending on model)
This menu allows you to customize the settings of your phone to make
it as convenient as possible for you to use.
On the Settings menu, please select the Short cuts menu and [Select].
Select the key that you wish to modify and validate.
Choose the function that you want to allocate to this key and validate.
74
251496749_myX-5-2_lu_en.book Page 75 Vendredi, 30. avril 2004 11:01 11
Settings
Date / Time
Set Date/Time
This menu allows you to set the date and time of your phone.
On the Date / Time menu, please select Set Date/Time and [Select].
Date: set the date by entering it directly in digital form or by using the
T S keys.
Use the X (or W) key to access the next (or previous) entry field.
Once the date is correct, validate it.
Time: same procedure as for setting the date.
Automatic update
This menu allows you to choose manual or automatic updating of date
and time (after switch off of your phone or when going abroad for
instance) (service depending on the operator).
From the Date / Time menu, please select Automatic upd. and
[Select].
Please select Automatic, Manual or On demand and press OK.
75
251496749_myX-5-2_lu_en.book Page 76 Vendredi, 30. avril 2004 11:01 11
Settings
Display
This menu allows you to select the date and time display type.
On the Date / Time menu, please select Display and [Select].
In the list that appears, select the desired display type between:
- Analog,
- Digital,
- None,
by using the T S keys and validate.
Time zone
This menu allows you to change time in relation to the GMT time.
On the Date / Time menu, please select Time zone and [Select].
Choose the time of the country desired by calculating the time from the
GMT time.
76
251496749_myX-5-2_lu_en.book Page 77 Vendredi, 30. avril 2004 11:01 11
Settings
Summer time
This menu allows you to set your phone to the summer/winter time.
On the Date / Time menu, please select Daylight savings and [Select].
Select 1 h, 2 h Summer time or Winter time depending on the season,
and validate.
77
251496749_myX-5-2_lu_en.book Page 78 Vendredi, 30. avril 2004 11:01 11
Settings
Connectivity
You can also connect it to your computer in order to receive data or fax
through GSM or GPRS network (depending on subscription): configure the
connection parameters of your computer using the Wellphone CD supplied
as an accessory.
IrDA
This menu is used to configure the data exchange with another device
(Personal Digital Assistant, PC, etc.).
On the Connectivity menu, please select the IrDA parameters menu
and validate.
You may then:
- send or receive images, sounds etc either using a different
compatible phone or from a PC installed with "My Pictures and
Sounds" (available from www.planetsagem.com), or
- exchange contacts, events and tasks with your PC by means of the
Wellphone software (page 53).
Serial Speed
On the Connectivity menu, please select the Serial Speed parameters
menu and validate.
The Speed menu enables you to select the speed to be used for data
exchanges via your phone's serial port. Except for specific
requirements, it is advisable to stick to the default setting: Automatic.
78
251496749_myX-5-2_lu_en.book Page 79 Vendredi, 30. avril 2004 11:01 11
Settings
Car kit
WAP settings
This menu allows you to configure your phone with a car kit.
On the Connectivity menu, please select the Car kit menu and
[Select].
Choose one of the options given: Automatic response, Switch off, Kit
volume.
This menu allows you to set various parameters needed for WAP connection.
On the Settings menu, please select WAP settings and [Select].
You can add or modify URL addresses.
79
251496749_myX-5-2_lu_en.book Page 80 Vendredi, 30. avril 2004 11:01 11
Settings
Help
This menu allows you to activate or deactivate the display of the help in
the phone.
80
251496749_myX-5-2_lu_en.book Page 81 Vendredi, 30. avril 2004 11:01 11
Care and safety information
Safety
Never attempt to disassemble your phone. You alone are responsible for how you use your phone and any consequences of
its use.
As a general rule, always switch off your phone wherever the use of a phone is prohibited.
Use of your phone is subject to safety measures designed to protect users and their environment.
Do not use your phone in damp areas (bathroom, swimming pool…). Protect it from liquids and other moisture.
Do not expose your phone to extreme temperatures from - 10°C to + 55°C.
The physicochemical processes created by chargers impose temperature limits when charging the battery. Your phone
automatically protects the batteries in extreme temperatures.
Do not leave your phone within the reach of small children (certain removable parts may be accidentally ingested).
Electrical safety
Only use the chargers listed in the manufacturer’s catalogue. Using any other charger may be dangerous; it would also
invalidate your warranty. Line voltage must be exactly the one indicated on the charger’s serial plate.
Aircraft safety
When travelling by plane, you will need to switch your phone off when so instructed by the cabin crew or the warning signs.
Using a mobile phone may be dangerous to the operation of the aircraft and may disrupt the phone network.
Its use is illegal and you could be prosecuted or banned from using cellular networks in the future if you do not abide by these
regulations.
Explosive materials
Please comply with warning signs at petrol station asking you to switch your phone off. You will need to comply with radio
equipment usage restrictions in places such as chemical plants, fuel depots and at any location where blasting operations are
under way.
Electronic equipment
To avoid the risk of demagnetisation, do not let electronic devices close to your phone for a long time.
Electronic medical equipment
Your phone is a radio transmitter which may interfere with electronic medical equipment or implants, such as hearing aids,
pacemakers, insulin pumps, etc. It is recommended that a minimum separation of 15 cm be maintained between the phone and
an implant. Your doctor or the manufacturers of such equipment will be able to give you any advice you may need in this area.
Hospitals
Always make sure that your phone is switched off in hospitals when so instructed by warning signs or by medical staff.
Road safety
Do not use your phone when driving. In order to give your full attention to driving, stop and park safely before making a call. You
must comply with any current legislation.
81
251496749_myX-5-2_lu_en.book Page 82 Vendredi, 30. avril 2004 11:01 11
Care and safety information
SAR
This phone complies with European requirements governing exposure to radio waves. Your phone is a transmitter/receiver. It
has been designed and manufactured to comply with radiofrequency energy exposure limits recommended by the Council of
the European Union and the ICNIRP for the entire population. These limits were established by independent scientific agencies
on the basis of in-depth and regular evaluations of scientific studies. The limits include a large safety margin that is intended to
guarantee the safety of all, irrespective of age or state of health.
The exposure standard for phones uses a unit of measure called the SAR, or Specific Absorption Rate. The SAR limit
recommended by the Council of the European Union and the ICNIRP is 2 W/kg (*). Tests were conducted on a standardised
usage position basis, with the phone transmitting at its maximum level certified in all its frequency bands. Although the
standardised measurement is done at maximum power, the real SAR of the phone in use is generally very far below the
maximum value.
The phone was designed to operate at the power level strictly neces-sary to ensure communication with the network. In general,
the closer you are to a base station, the lower the power at which the phone will transmit.
Validation of conformity with European directive 1999/5 (directive R&TTE) is a pre-requisite for introducing any model of phone
onto the market. Protection of health and the safety of the public and the user are a vital requirement of this directive. This
model's maximum SAR value measured at the compliance test for use at the ear was 0.64 W/kg. Although differences may exist
from one phone to the other and depending on position, all comply with European regulations.
Advice for limiting exposure to radiofrequency (RF) fields
For individuals concerned about limiting their exposure to RF fields, the World Health Organization (WHO) provides the following
advice:
Precautionary measures: Present scientific information does not indicate the need for any special precautions for the use of
mobile phones. If individuals are concerned, they might choose to limit their own or their children’s’ RF exposure by limiting the
length of calls, or using "hands-free" devices to keep mobile phones away from the head and body.
Further information on this subject can be obtained from the WHO home page http://www.who.int/peh-emf WHO Fact sheet
193: June 2000.
(*) The SAR limit for phones used by the general public is 2 watts/kilogram (2 W/kg) on average for 10 g of tissue. This value
includes a large safety margin to increase protection and to take account of the variations in measurements. The SAR
information may vary in different parts of the world, depending on declared national requirements and the frequency
bands used by the network.
82
251496749_myX-5-2_lu_en.book Page 83 Vendredi, 30. avril 2004 11:01 11
Warranty
You must always use your phone for the purpose for which it was designed, under normal operating conditions. SAGEM SA
declines all responsibility for any use outside of the scope of its designed purpose and for any consequences of this use.
The software program developed by SAGEM remains the exclusive property of SAGEM SA. It is therefore highly prohibited to
modify, translate, de-compile or disassemble this software program or any part thereof.
Usage precautions
Your phone allows you to download ring tones, icons and animated screensavers. Some of these items may contain data that
may cause malfunctions of your phone or data losses (virus for example).
For this reason, SAGEM SA rejects all responsibility concerning (1) the reception of downloaded data or losses of the said data,
(2) the impact on the operation of the phone and (3) damages resulting from receiving the said downloaded data or loss of said
data. In addition, SAGEM SA states that a failure caused by receiving downloaded data that do not comply with the
specifications set by SAGEM SA is excluded from the warranty. Consequently, the diagnosis and repair of a phone infected by
the said downloaded data will be at the expense of the customer.
Any content that you download to your phone may be protected by copyright belonging to third parties and consequently you
may not have the right to use this content or its use may be restricted. Consequently it is up to you to ensure that you have
permission, such as under the terms of a license agreement, to use any content that you download. Furthermore, SAGEM SA
does not guarantee the accuracy nor the quality of any content that you download. You alone are responsible for the content
that you download to your mobile phone and how you use it. SAGEM SA cannot be held responsible for this content nor for its
use.
It is your responsibility to ensure compliance, at your own expense, with the laws and regulations applicable in the country where
you use your phone.
Warranty conditions
Whenever you wish to make use of the warranty, please contact your vendor and present him with the purchasing paperwork
that he gave you.
If a fault occurs, he will advise you.
1.
The new phone (excluding consumables), including new accessories bundled with the phone, are guaranteed by SAGEM SA,
parts and labour (apart from travel) against any manufacturing fault for a period of twelve (12) months with effect from the sale
of the phone to the customer, on presentation of the paperwork stating the purchase date of the phone.
Phones that have been repaired or replaced as standard during the warranty period stated above are guaranteed (parts and
labour) until the later of these two dates:
Expiry of the guarantee period of twelve (12) months stated above or three (3) months with effect from the date of support
provided by SAGEM SA.
Your legal rights under the terms of applicable national law as well as your rights in relation to your retailer, as set out in the
sales contract, remain applicable and are not in any way affected by this guarantee.
In any disputes, the phone is covered by the legal warranty against the consequences of faults or hidden defects in compliance
with articles 1641 and subsequent of the French civil code.
83
251496749_myX-5-2_lu_en.book Page 84 Vendredi, 30. avril 2004 11:01 11
Warranty
2.
All faulty phones under warranty will be replaced or repaired free of charge at SAGEM SA's option (with the exclusion of repair
of any other damage), once it has been specified that the work required for the application of the warranty will be done in a
workshop and that the return costs (transport and insurance) of the phone to the address to be indicated to it by the SAGEM SA
after-sales service, whose phone number will appear on the delivery note, will be charged to the customer.
Subject to essential legal provisions, SAGEM SA does not accept any warranty, explicit or implicit, other than the warranty
provided expressly in this chapter, nor shall SAGEM SA accept responsibility for any immaterial and/or indirect damages (such
as loss of orders, loss of profit or any other financial or commercial damage) under the warranty or not.
3.
The acceptance of a phone under warranty demands that a purchase document that is legible and without modi-fication, stating
vendor's name and address, date and place of purchase, type of phone and IMEI, are attached to the warranty, and that the
information on the phone identification label is legible and that this label or any other seal has not been tampered with.
The warranty applies in normal conditions of use.
Prior to sending the phone for repair, it is the customer's responsibility to backup at his expense the customized data stored in
the phone (phonebook, settings, wallpapers). A list of backup facilities can be provided by SAGEM SA on request. The
responsibility of SAGEM SA cannot be invoked if damage occurs to customer files, programs or data. The information or
operating elements and the contents of files will not be re-installed in any case in the event of loss.
SAGEM SA may decide, at its option, to repair the phone with new or reconditioned parts, replace the phone with a new phone
or, in any dispute, a phone in good working condition. During its work SAGEM SA reserves the facility to make, where
necessary, any technical modifications to the phone where these modifications doe not adversely affect its initial purpose.
Faulty parts to be replaced during a repair under warranty will become the property of SAGEM SA.
The phone repair and standstill time during the warranty period may not lead to an extension of the warranty period as stated
in article 1 above, provided no other vital provisions have been agreed.
The application of the warranty is subject to the full payment of the sums due for the phone when the request for support is made.
4.
The following are excluded from the warranty:
Breakdowns or malfunctions due to non-compliance with the installation and use instructions, to an external cause of the phone
(shock, lightning, fire, vandalism, malice, water damage of any type, contact with various liquids or any harmful agent, unsuitable
electric current...), to modifications of the phone made without the written consent of SAGEM SA, to a servicing fault, as described
in the documentation supplied with the phone, to lack of supervision or care, to poor environmental conditions of the phone
(especially temperature and hygrometry, effects of variations in electric voltage, interference from the mains network or earth) or
even due to a repair, a call-out (opening or trying to open the phone) or to servicing done by personnel not approved by SAGEM SA.
Damage resulting from inadequate packaging and/or poor packing of the phone sent back to SAGEM SA.
Normal wear and tear of the phone and accessories.
84
251496749_myX-5-2_lu_en.book Page 85 Vendredi, 30. avril 2004 11:01 11
Warranty
Communication problems linked with a poor environment, especially:
Problems accessing and/or logging onto the Internet, such as breakdowns of the access network, the failure of the subscriber's
or his correspondent's line, transmission fault (poor geographic coverage by radio transmitters, interference, disturbance, failure or poor quality of phone lines...), a fault inherent to the local network (cabling, file server, user phone) and/or transmission
network fault (interference, disturbance, failure or poor quality of the network...).
Change of parameters of the cellular network made after the phone was sold.
Supply of new software versions.
Current servicing work: delivery of consumables, installation or replacement of these consumables...
Call-outs for phone or software modified or added without the written consent of SAGEM SA.
Faults or disruptions resulting from the use of products or accessories not compatible with the phone.
Phones returned to SAGEM SA without having complied with the return procedure specific to the phone cove-red by this
warranty.
The opening or closing of a SIM operator key and call-outs resulting in the non-operation of the phone resulting from the opening
or closing of SIM operator key done without the agreement of the original operator.
5.
In the cases of warranty exclusion and of expiry of the warranty period, SAGEM SA shall draw up an estimate to be given to the
customer for acceptance before any call-out. The repair and carriage costs (there and back) given in the accepted estimate will
be charged to the customer.
These provisions are valid unless a special written agreement has been made with the customer. If one of the provisions turns
out to infringe a legally essential rule that consumers could have the benefit of under the national legislation, this provision will
not be applied, but all other provisions will remain valid.
85
251496749_myX-5-2_lu_en.book Page 86 Vendredi, 30. avril 2004 11:01 11
End User Licence Agreement (EULA), for the
software
CONTEXT AND ACCEPTATION OF THE AGREEMENT
You have acquired a Mobile Phone device ("DEVICE"), manufactured by SAGEM SA (SAGEM), that includes software either
developed by SAGEM itself or licensed third party Software suppliers ("SOFTWARE COMPANIES") to SAGEM with the rights
to sub-license it to the purchaser of the device. Those installed software products whatever their company of origin, and
wherever the name of the company of origin is indicated of not in the DEVICE documentation, as well as associated media,
printed materials, and "online" or electronic documentation ("SOFTWARE") are protected by international intellectual property
laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved.
IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT ("EULA"), DO NOT USE THE DEVICE OR COPY THE
SOFTWARE. INSTEAD, PROMPTLY CONTACT SAGEM FOR INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S)
FOR A REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE, WILL
CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT).
SOFTWARE includes software already installed on the DEVICE ("DEVICE Software") and Software contained on the CD-ROM
disk ("Companion CD"), if any is supplied with the product.
GRANT OF SOFTWARE LICENCE
This EULA grants you the following licence:
DEVICE Software. You may use the DEVICE Software as installed on the DEVICE. All or certain portions of the DEVICE
Software may be inoperable if you do not have and maintain a service account with an appropriate Mobile Operator, or if the
Mobile Operator's network facilities are not operating or configured to operate with the DEVICE software.
COMPANION CD. If any is supplied, additional software for your personal computer is included with your DEVICE. You may
install and use the software component(s) contained in the Companion CD only in accordance with the terms of the printed or
online end user license agreement(s) provided with such component(s). In the absence of an end user license agreement for
particular component(s) of the Companion CD, you may install and use only one (1) copy of such component(s) on the DEVICE
or a single computer with which you use the DEVICE.
Security Updates. The SOFTWARE may include digital rights management technology. If SOFTWARE does contain digital
rights management technology, content providers are using the digital rights management technology ("DRM") contained in the
SOFTWARE to protect the integrity of their content ("Secure Content") so that their intellectual property, including copyright, in
such content is not misappropriated. Owners of such Secure Content ("Secure Content Owners") may, from time to time,
request manufacturers or SOFTWARE SUPPLIERS to provide security related updates to the DRM components of the
SOFTWARE ("Security Updates") that may affect your ability to copy, display and/or play Secure Content through the
SOFTWARE or third party applications that utilise the DRM. You therefore agree that, if you elect to download a licence from
the Internet which enables your use of Secure Content, Suppliers may, in conjunction with such licence, also download onto
your DEVICE such Security Updates that a Secure Content Owner has requested that SOFTWARE SUPPLIERS distribute.
SAGEM and SOFTWARE SUPPLIERS will not retrieve any personally identifiable information, or any other information, from
your DEVICE by downloading such Security Updates.
86
251496749_myX-5-2_lu_en.book Page 87 Vendredi, 30. avril 2004 11:01 11
End User Licence Agreement (EULA), for the
software
DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS
COPYRIGHT. All title and intellectual property rights in and to the SOFTWARE (including but not limited to any images,
photographs, animations, video, audio, music, text and "applets," incorporated into the SOFTWARE), the accompanying printed
materials, and any copies of the SOFTWARE, are owned by SAGEM or the SOFTWARE SUPPLIERS. You may not copy the
printed materials accompanying the SOFTWARE. All title and intellectual property rights in and to the content which may be
accessed through use of the SOFTWARE is the property of the respective content owner and may be protected by applicable
copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such content. All rights not
specifically granted under this EULA are reserved by SAGEM and the SOFTWARE SUPPLIERS
Limitations on Reverse Engineering, Decompilation and Disassembly. You may not reverse engineer, decompile, or
disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law
notwithstanding this limitation.
Single DEVICE. The DEVICE Software is licensed with the DEVICE as a single integrated product. The DEVICE Software
installed in the memory of the DEVICE may only be used as part of the DEVICE.
Single EULA. The package for the DEVICE may contain multiple versions of this EULA, such as multiple translations and/or
multiple media versions (e.g., in the user documentation and in the software). Even if you receive multiple versions of the EULA,
you are licensed to use only one (1) copy of the DEVICE Software.
Software Transfer. You may not permanently transfer any of your rights under this EULA with regard to the DEVICE Software
or Companion CD, except as permitted by the applicable Mobile Operator. In the event that the Mobile Operator permits such
transfer, you may permanently transfer all of your rights under this EULA only as part of a sale or transfer of the DEVICE,
provided you retain no copies, you transfer all of the SOFTWARE (including all component parts, the media and printed
materials, any upgrades , this EULA and, if applicable, the Certificate(s) of Authenticity), and the recipient agrees to the terms
of this EULA. If the SOFTWARE is an upgrade, any transfer must include all prior versions of the SOFTWARE.
Software Rental. You may not rent or lease the SOFTWARE.
Speech/Handwriting Recognition. If the SOFTWARE includes speech and/or handwriting recognition component(s), you
should understand that speech and handwriting recognition are inherently statistical processes; that recognition errors are
inherent in the processes; and that errors can occur in the component's recognition of your handwriting or speech, and the final
conversion into text.. Neither SAGEM nor its suppliers shall be liable for any damages arising out of errors in the speech and
handwriting recognition processes.
NOTICE REGARDING THE MPEG-4 VISUAL STANDARD. The SOFTWARE may include MPEG-4 visual decoding
technology. MPEG LA, L.L.C. requires the following notice:
USE OF THIS SOFTWARE IN ANY MANNER THAT COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED,
EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR INFORMATION (i) GENERATED BY AND OBTAINED WITHOUT
CHARGE FROM A CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE, AND (ii) FOR PERSONAL USE
ONLY; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA, L.L.C.
If you have questions regarding this Notice, please contact MPEG LA, L.L.C., 250 Steele Street, Suite 300, Denver, Colorado
80206; Telephone 303 331.1880; FAX 303 331.1879
87
251496749_myX-5-2_lu_en.book Page 88 Vendredi, 30. avril 2004 11:01 11
End User Licence Agreement (EULA), for the
software
Termination. Without prejudice to any other rights, SAGEM may terminate this EULA if you fail to comply with the terms and
conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE and all of its component parts.
Consent to Use of Data. You agree that SOFTWARE SUPPLIERS may collect and use technical information gathered in any
manner as part of product support services related to the SOFTWARE. SOFTWARE SUPPLIERS may use this information
solely to improve their products or to provide customised services or technologies to you. SOFTWARE SUPPLIERS may
disclose this information to others, but not in a form that personally identifies you.
Internet Gaming/Update Features. If the SOFTWARE provides, and you choose to utilise, the Internet gaming or update
features within the SOFTWARE, it is necessary to use certain computer system, hardware, and software information to
implement the features. By using these features, you explicitly authorise SOFTWARE SUPPLIERS to use this information
solely to improve their products or to provide customised services or technologies to you. SOFTWARE SUPPLIERS may
disclose this information to others, but not in a form that personally identifies you.
Internet-Based Services Components. The SOFTWARE may contain components that enable and facilitate the use of
certain Internet-based services. You acknowledge and agree that SOFTWARE SUPPLIERS may automatically check the
version of the SOFTWARE and/or its components that you are utilising and may provide upgrades or supplements to the
SOFTWARE that may be automatically downloaded to your Device.
Links to Third Party Sites. The SOFTWARE may provide you with the ability to link to third party sites through the use of the
SOFTWARE. The third party sites are not under the control of SAGEM. Neither SAGEM nor its affiliates are responsible for (i)
the contents of any third party sites, any links contained in third party sites, or any changes or updates to third party sites, or (ii)
webcasting or any other form of transmission received from any third party sites. If the SOFTWARE provides links to third party
sites, those links are provided to you only as a convenience, and the inclusion of any link does not imply an endorsement of the
third party site by SAGEM or its affiliates.
Additional Software/Services. The SOFTWARE may permit SAGEM to provide or make available to you SOFTWARE
updates, supplements, add-on components, or Internet-based services components of the SOFTWARE after the date you
obtain your initial copy of the SOFTWARE ("Supplemental Components").
If SAGEM provides or makes available to you Supplemental Components and no other EULA terms are provided along with the
Supplemental Components, then the terms of this EULA shall apply.
SAGEM reserves the right to discontinue any Internet-based services provided to you or made available to you through the use
of the SOFTWARE.
EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is subject to U.S. export jurisdiction. You agree to comply with
all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration
Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other governments.
UPGRADES AND RECOVERY MEDIA
- DEVICE Software. If the DEVICE Software is provided by SAGEM separate from the DEVICE on media such as a ROM
chip, CD ROM disk(s) or via web download or other means, and is labelled "For Upgrade Purposes Only", you may install
one copy of such DEVICE Software onto the DEVICE as a replacement copy for the existing DEVICE Software and use it in
accordance with this EULA, including any additional EULA terms accompanying the upgrade DEVICE Software.
88
251496749_myX-5-2_lu_en.book Page 89 Vendredi, 30. avril 2004 11:01 11
End User Licence Agreement (EULA), for the
software
- COMPANION CD. If any Companion CD component(s) is provided by SAGEM separate from the DEVICE on CD ROM
disk(s) or via web download or other means, and labelled "For Upgrade Purposes Only" , you may (i) install and use one
copy of such component(s) on the computer(s) you use to exchange data with the DEVICE as a replacement copy for the
existing Companion CD component(s).
RESPONSIBILITIES
SUPPORT AND INFORMATION Should you have any questions concerning this EULA, or if you desire to contact SAGEM ]for
any other reason, please refer to the address provided in the documentation for the DEVICE.
NO LIABILITY FOR CERTAIN DAMAGES. EXCEPT AS PROHIBITED BY LAW, SAGEM SHALL HAVE NO LIABILITY FOR
ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM OR IN CONNECTION WITH
THE USE OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF
ITS ESSENTIAL PURPOSE.
FOR APPLICABLE LIMITED WARRANTIES AND SPECIAL PROVISIONS PERTAINING TO YOUR PARTICULAR
JURISDICTION, PLEASE REFER TO YOUR WARRANTY BOOKLET INCLUDED WITH THIS PACKAGE OR PROVIDED
WITH THE SOFTWARE PRINTED MATERIALS.
89
251496749_myX-5-2_lu_en.book Page 90 Vendredi, 30. avril 2004 11:01 11
Troubleshooting
PROBLEM - SITUATION
It is impossible to switch
the phone on
Battery status unknown
LOW BATTERY
SIM not present
Incorrect PIN code
SIM BLOCKED
90
ACTIONS
Remove and replace the battery.
If you still cannot switch the phone on, charge the battery:
- Put it on charge for at least 15 minutes before switching it back on again.
- Check if the battery icon is scrolling up and down.
- If so, the phone is charging.
- If not, please take the charger out and put it back on again. Please check
that the charging icon is scrolling up and down.
- If you still cannot switch the phone on, please disconnect the charger, put
it back on again and please repeat that manipulation several times.
- If the charging icon is still not scrolling up and down, please contact your
after-sales services.
- When the charging icon has stopped scrolling up and down, the battery is
charged.
The phone does not recognize the battery. Please check the position of the
battery.
This message is displayed when the battery becomes too weak. The phone
switches itself off automatically. Put the phone on charge.
Check if the SIM card is present and properly positioned / inserted.
Check the condition of the SIM card. If damaged, please go back to the
operator's shop for advice. Contact your after-sales service if the message
persists.
An incorrect PIN code has been entered. Be careful! Three incorrect PIN
codes will block the SIM Card.
You have entered three incorrect PIN codes.
Enter your PUK code to unblock your SIM Card.
You must enter: **05*PUK*PIN*PIN#
You must enter the PUK code (Personal Unblocking Key) given by your
network provider.
10 errors will permanently block your SIM Card. You must then contact your
network provider to get a new one.
251496749_myX-5-2_lu_en.book Page 91 Vendredi, 30. avril 2004 11:01 11
Troubleshooting
PROBLEM - SITUATION
SIM LOCKED
No call connection
No receiving calls
Quality reception when calling
Impossible to send message
ACTIONS
On network providers’ request, the handset can only be used with some
types of SIM cards. This message means that the SIM card you are using
does not fit with the phone. Take the SIM card out, and switch it back on. If
the message SIM not present appears on the screen, you will need to
check its compatibility next to the place where you bought it. If not, please
contact your after-sales service.
Check that the number you have dialled is correct.
If the letter R is displayed on the top right corner of the screen, without any
network name displayed, only emergency services can be called.
Check the status of your credit.
Check that the SIM Card you are using offers the service you are requesting
; check if its validity has not expired.
Check and deactivate the outgoing calls restriction when necessary.
The network could be saturated. Try later.
If the problem persists, please contact your Technical Helpdesk.
Try to make a call in order to check that the phone and the networks are
operational.
Check and deactivate the permanent call forwarding (permanent call
forwarding icon displayed on the screen).
Check and deactivate the incoming calls restriction when necessary.
If the problem persists, please contact your Technical Helpdesk.
Avoid placing your fingers on the top of the phone, where the aerial is
integrated: the phone will have to use full strength to establish a quality
transmission.
Check that the message centre number is correctly entered.
To do so, please select the menu Messages, select Options, select MSG
centre n° and check the number entered. Please contact your network
provider to get this number.
91
251496749_myX-5-2_lu_en.book Page 92 Vendredi, 30. avril 2004 11:01 11
Troubleshooting
PROBLEM - SITUATION
No answer phonebox
ACTIONS
Check that the SIM card does offer this service.
Program the call to be forwarded to answer phoneusing the information
provided by the operator.
Check that the SIM card used offers this service. Try to make a call to check
that phone and network are operational.
Check if the answer phone number is properly configured. To do so, go to
the Calls menu, select Voicemail and check the number. Otherwise, enter
your operator’s answer phone centre number.
Call the answer phone and listen to the new messages to make it disappear.
Switch off and then switch phone back on.
If answer phone icon flashing
In WAP context:
SERVER NOT ANSWERING
message
Logon to home page impossible
In the WAP menu, Clear the cache.
Operator name does not appear on Go into the Settings menu, select Networks, then Selection. Wait until the
screen
operator appears, select it and validate.
If the Operator logo is present (depending on model), activate the display
(Settings/Display/Operator logo).
How do I (un)lock the keypad?
Press the
key, then the OK key.
How do I switch to silent mode?
Hold the
key down unless ring tone sounds, when a short touch is
enough.
How do I activate zoom?
Can be activated only in SMS, MMS and WAP screens; hold down the
key.
How do I delete the envelop that
If you have received a voice mail, please call your voice mailbox and follow
appears on the screen?
the instructions given.
How do I delete the answer phone This answer phone means that you have received a voice mail: please call
that appears on the screen?
your voice mailbox and listen to it. Please follow the instructions given.
How do I remove the written
Press the
key to go back to the initial page without messages.
message at the bottom of the home
page (1 call)
92
251496749_myX-5-2_lu_en.book Page 93 Vendredi, 30. avril 2004 11:01 11
Troubleshooting
PROBLEM - SITUATION
How do I download ring tones?
ACTIONS
Logon to one of the following site via your computer:
www.planetsagem.com. These site offer to send ring tones to your phone in
the form of an SMS. You can also logon to your operator's site. Once the
SMS has been received, all you have to do is save it: validate the option
« Save messages », the tune will then be added to your list. In addition, you
can logon to some sites by phone.
Go into the Multimedia menu, select My Pictures or My Sounds then
delete some objects.
How do I free up memory to
download my objects (sounds,
images)
How do I free up memory to receive Manage your Outbox carefully. It is recommended not saving them
new messages?
automatically: too many messages saved will quickly fill up the available
memory and no further messages will be received. To delete them, please
go into the Messages menu, select Outbox then delete some messages.
Manage your Inbox carefully also.
How do I free up memory to store It is highly recommended to manage your Phonebook carefully.
new contacts in my Phonebook?
If you have received pictures enclosed to a Vcard, please save or delete
them.
How can I increase the efficiency of The most efficient actions are as follows:
my phone?
Please keep your phone safely in order to avoid pressing the keys
unnecessarily: every time a key is pressed the screen lights up.
You can deactivate the screensaver or select the activation time to be more
than every 300 s (the screensaver uses processing power).
Make sure that you don’t obstruct the antenna with your fingers when using
the phone (see page 17).
93
251496749_myX-5-2_lu_en.book Page 94 Vendredi, 30. avril 2004 11:01 11
Index
Accessories
Activating your phone
Alarm
Anonymous mode
p9
p14
p55
p66
Backlight
Battery
Charging the battery
Installing the battery
Beeps
p63
p18
p15
p59
94
p53
p56
p72
p67
p65
p67
p66
p66
p65
p38, p64
p79
p9
p71
p20, p39
p20
p23
p22
p22
p21
p22
p16
p62
p54
p73
p54
Date / Time
Display
Calculator
Calendar
Call barring
Calls (menu)
Automatic redial
Call forward
Call waiting
Counters
Display number
View last calls
Camera
Car kit
Charger
Confidentiality
Contact
Add contact
Call
Delete
Display contact
Mailing list
Modify
Contacts
Contrast
Converter
Cost
Currencies
p75
p60
Energy saving
p63
Fax
Fixed dialling
p78
p72
Games
Getting started
GPRS
GSM
p48
p16
p44, p45, p47
p45
Hands-free
Help
p17
p12, p80
Icon
Initial screen
Input modes
IP address
IrDA
p13
p13
p27
p45
p78
251496749_myX-5-2_lu_en.book Page 95 Vendredi, 30. avril 2004 11:01 11
Index
Keypad locking
p10, p69
Languages
Local information
p64
p36
p35, p42
p3
p28
p25
p33
p31
p32
p30
p34
Navigation principles
Necklace
Networks
p12
p11
p73
Operator
Operator logo
p71
p62
Phone code
Phonebook
Contacts menu
Memory
New contact
Using the phonebook
p38, p41, p64
p38, p40
p69
p70
p10
Recorder
Ring tones
Memory
Menus
Messages
Compose MMS
Compose SMS
Drafts
Inbox
Outbox
Receiving messages
Sending options
Photo
Picture
PIN number
PIN2 number
Programmable keys
p60
p58
Safety information
Screensaver
Security
Sending options
Sentbox
Serial Speed
Short cut keys
Silent mode
SIM card
Skins
SMS
Sounds
p81
p61
p69
p34
p32
p78
p10, p74
p59
p14, p15
p60
p25
p42, p58
T9
Timer
ToDo
Troubleshooting
p26
p55
p49
p90, p91, p92, p93
p70
p21
p22
p20
p19
vCal
vCard
Vibrate
Voicemail
Volume
p51, p57
p24
p58
p68
p58
95
251496749_myX-5-2_lu_en.book Page 96 Vendredi, 30. avril 2004 11:01 11
Index
Wallpaper
p61
WAP
p43, p44, p45, p46, p47
Configuring WAP parameters
p44, p45
Downloading objects
p46
Services menu
p43, p44
WAP logging off
p46
WAP logging on
p46
WAP settings
p79
Warranty
p83
Your phone package
96
p9

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 99
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:56e2326b-2f1d-4ca7-84a7-e20289b87987
Producer                        : Acrobat Distiller 6.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2004:07:12 14:29:50+02:00
Create Date                     : 2004:07:12 14:29:50+02:00
Document ID                     : uuid:bcaf1bc1-2eb4-4843-96f8-88bf47a7eae6
Format                          : application/pdf
Title                           : User Manual_myX-5-2_lu_en.pdf
Creator                         : PC-8726
Author                          : PC-8726

EXIF Metadata provided by EXIF.tools