Sagem Wireless 95MYX2A GSM 850/1900 Mobile Phone User Manual 251312906 My X2a English

Sagem Wireless GSM 850/1900 Mobile Phone 251312906 My X2a English

Users Manual

Download: Sagem Wireless 95MYX2A GSM 850/1900 Mobile Phone User Manual 251312906 My X2a English
Mirror Download [FCC.gov]Sagem Wireless 95MYX2A GSM 850/1900 Mobile Phone User Manual 251312906 My X2a English
Document ID374893
Application IDJ8JwfxHJf3TosnucBMaDFA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize213.67kB (2670816 bits)
Date Submitted2003-11-20 00:00:00
Date Available2003-11-20 00:00:00
Creation Date2003-07-09 13:25:08
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2003-09-19 09:08:21
Document Title251312906 My-X2a English.book
Document CreatorFrameMaker 7.0
Document Author: g094216

251312906 My-X2a English.book Page 1 Mercredi, 9. juillet 2003 1:46 13
Conformance Document
SAGEM SA declare under its sole responsibility that the product Dual Band GSM 850/PCS Type B2003 conforms to
the requirements of the following EEC directives:
EEC Directive
1999/5/CE
Safety
EN 60950
EMC
EN 301 489-1
EN 301 489-7
This phone is marked CE in accordance with RTTE directive with CEM EN301489-7 norme implementation, suited to
the 850/1900 work frequencies. It is not intended to be used in Europe.
Low voltage directive
73/23/CEE
Network
3GPP TS 51.010-1 v 5.4.0
Requirements GT01 v 4.7.0
TBR 19 Edition 5
TBR 20 Edition 3
TBR 31 Edition 2
TBR 32 Edition 2
EN 301 419-1
EN 301511
FCC Conformance Document
FCC Part 24
Network
Health
NAPRD03.ver 2.8.0
Draft IEEE Std 1528-200x
251312906 My-X2a English.book Page 2 Mercredi, 9. juillet 2003 1:46 13
Safety Information for Wireless handled phones
Use of your phone is subject to safety rules designed to protect the user
and his or her environment.
Exposure to Radio Frequency Signals
- Your wireless handheld portable phone is a low power radio transmitter
and receiver. When it is ON, it receives and also sends out frequency (RF)
signals.
- In August, 1996, the Federal Communications Commissions (FCC)
adopted RF exposure guidelines with safety levels for handheld wireless
phones. Those guidelines are consistent with the safety standards
previously set by both U.S. and international standards bodies:
ANSI C95.1 (1992)(*)
NCPR Report 86 (1986)(*)
ICNIRP (1996)(*)
- Those standards were based on comprehensive and periodic evaluations
of the relevant scientific literature. For example, over 120 scientists,
engineers, and physicians from universities, government health agencies,
and industry reviewed the available body of research to develop the ANSI
Standard (C95.1).
- The design of your phone complies with the FCC guidelines (and those
standards).
- For body worn operation, this phone has been tested and meets FCC RF
exposure guidelines when used with an accessory that contains no metal
and that positions the handset a minimum of 1.5 cm from the body.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
Phone Operation
- Normal position: hold the phone as you would any other phone with the
upper zone (back of the LCD display) pointed up and over your shoulder.
- Tips on efficient operation: for your phone to operate most efficiently: do
not touch cover unnecessarily the top part of the phone with your hand.
This would cover the integrated antenna and affect call quality and may
cause the phone to operate at a higher power level than otherwise needed.
(*) American National Standards Institute; National Council on Radiation Protection and Measurements;
International Commission and Non-Ionizing Radiation Protection.
251312906 My-X2a English.book Page 3 Mercredi, 9. juillet 2003 1:46 13
Safety Information for Wireless handled phones
Driving
- Check the laws and regulations on the use of wireless phones in the areas
where you drive. Always obey them. Also, if using your phone while driving
while driving please:
• Give full attention of driving, driving safely is your first responsibility
• Use hands-free operation, if available
• Pull off the road and park before making or answering a call if driving
conditions so require.
Electronic Devices
- Most modern electronic equipment is shielded from RF signals. However,
certain electronic equipment may not be shielded against the RF signals
from your wireless phone.
- Some phone accessories allow to reduce the radiation interferences of the
phone. Please contact your distributor.
Pacemakers
The Health Industry Manufacturers Association recommends that a
minimum separation of six (6”) inches be maintained between a handheld
wireless phone and a pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent with the
independent research by and recommendations of Wireless Technology
Research.
Persons with pacemakers:
- Should ALWAYS keep the phone more than six inches from their
pacemaker when the phone is turned ON
- Should not carry the phone in the breast pocket
- Should use the ear opposite to the pacemaker to minimize the potential for
interference
- If you have any reason to suspect that interference is taking place, turn
your phone OFF immediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In
the event of such interference, you may want to consult your service
provider.
251312906 My-X2a English.book Page 4 Mercredi, 9. juillet 2003 1:46 13
Safety Information for Wireless handled phones
Other Medical Devices
If you use any other personal medical device, consult the manufacturer
of your device to determine if they are adequately shielded from external
RF energy. Your physician may be able to assist you in obtaining this
information.
Turn your phone OFF in health care facilities when any regulations
posted in these areas instruct you to do so.
Hospitals or health care facilities may be using equipment that could be
sensitive to sensitive external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also consult the
manufacturer of any equipment that has been added to your vehicle.
Posted Facilities
Turn your phone OFF in any facility where posted notices so require.
Aircraft
FCC regulations prohibit using your phone while in the air. Switch OFF
your phone before boarding an aircraft.
Blasting Areas
To avoid any interfering with blasting operations, turn your phone OFF
when in a “blasting area” or in areas posted: “Turn off two-way radio”.
Obey all signs and instructions.
251312906 My-X2a English.book Page 5 Mercredi, 9. juillet 2003 1:46 13
Safety Information for Wireless handled phones
Potentially Explosive Atmospheres
- Turn your phone OFF when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Sparks in such areas
could cause an explosion or fire resulting in bodily injury or even death.
- Areas with a potentially explosive atmosphere are often but not always
clearly marked. They include fueling areas such as gasoline stations;
below deck on boats, fuel or chemical transfer or storage facilities; vehicles
using liquefied petroleum gas (such as propane or butane); areas where
the air contains chemicals or particles, such as grain, dust, or metal
powders; and any other area where you would normally be advised to turn
off your vehicle engine.
For Vehicles equipped with Air Bag
An air bag inflates with great force. DO NOT place objects, including both
installed or portable wireless equipment, in the area over the air bag or in
the air bag deployment area. If in-vehicle wireless equipment is
improperly installed and the air bag inflates, serious injury could result.
Electrical Safety
- Only us the appropriate chargers recommended in the manufacturer’s
catalog. Using another charger may prove dangerous and could invalidate
the warranty of your phone.
- The main power socket should be easily accessible.
- Make sure that the main voltage corresponds to the level marked on the
charger identification plate.
General Precautions
- Do not try to open your phone and repair it yourself. The manufacturer
cannot be held liable for any resulting damage.
- Any work done by an unqualified and unauthorized person will invalidate
your warranty.
- Do not use your phone in humid places (bathroom, swimming pool, etc.).
Protect it from splashing water and other liquids.
- Do not expose your phone to extreme temperatures.
- Keep your phone out of reach of small children. Do not allow them to play
with it, it is not a toy.
251312906 My-X2a English.book Page 6 Mercredi, 9. juillet 2003 1:46 13
Safety Information for Wireless handled phones
WARNING
- The manufacturer cannot
be held liable for any failure
to comply with the above
recommendations or for any
misuse.
- The software program
developed by SAGEM SA
remains the exclusive
property of SAGEM SA. It is
BackhighlyOptions
therefore
prohibited
to
modify,
translate,
decompile or disassemble
this software program or
any part thereof.
- SAGEM SA may not be held
responsible for the contents
of messages, software or
objects downloaded and/or
for any direct or indirect
consequential damage to
the phone itself.
- Only use your phone with original accessories. Failure to comply with
these rules will invalidate your warranty.
- Remember to disconnect the charger before removing the battery.
- The physical and chemical processes used in rechargeable batteries
mean that temperature limits must be followed during rapid charging. Your
phone automatically protects the batteries from extreme temperatures.
- If the phone is disconnected from the battery for an extended period of
time, it will lose the time and the recorded voice messages.
Emergency Calls
IMPORTANT
- This phone, like any PCS phone, operates using radio signals, PCS and
landline networks, and user-programmed functions. As a consequence a
connection in all conditions cannot be guaranteed. Therefore you should
never rely solely upon any PCS phone for essential communications (e.g.
medical emergencies).
- To make or receive any calls, this phone must be switched on and in
service area with adequate PCS signal strength. Emergency calls may not
be possible on all PCS networks or when certain network services and/or
phone features are in use. Check with local Service Providers.
- When making an emergency call, remember to give all the necessary
information as accurately as possible. Remember that your PCS phone
may be the only means of communication at the scene of an accident - do
not terminate the call until given permission to do so.
- If certain features are in use (such as Keyguard), you may first need to turn
those features off before you can make an emergency call. Consult this
manual and your local PCS Service Provider.
Emergency Calling
- If the phone is not on, press
- Key in emergency number for your present location (e.g. 911 or other
official emergency number).
- Press
- If you dial 911 during a call, the phone terminates the current call and
attempts to make a call to the emergency number 911.
251312906 My-X2a English.book Page 7 Mercredi, 9. juillet 2003 1:46 13
Safety Information for Wireless handled phones
FCC/INDUSTRY CANADA NOTICE
Your phone may cause TV or radio interference (e.g. when using phone
in close proximity of receiving equipment). The FCC/INDUSTRY Canada
can require you to stop using your phone if such interference cannot be
eliminated. If you need assistance, contact your local dealer.
This device complies with parts 15 and 68 of the FCC rules. Operation is
subject to the condition that this device does not cause harmful
interferences.
251312906 My-X2a English.book Page 8 Mercredi, 9. juillet 2003 1:46 13
Menus
Phonebook
Phonebook menu
Security
Date/Time
Keypad locking
My objects
PIN number
Languages
PIN number 2
Compose
Networks
Phone code
Inbox
Contrast
Confidentiality
Drafts
Energy saving
Operator
Options
Shortcuts
Call barring
Memory
Reset settings
Fixed dialling
Messages
WAP
Calls
Accessories
Calls forwarded
Calculator
View last calls
Converter
Counters
Alarm
Display number
Timer
Ring tones
Call waiting
Car kit
Vibrate
Auto redial
Data
Silent mode
Answer phone number
Beeps
Local info
Picture puzzle
Sounds
Background
Colours
Wallpapers
Screensavers
Greeting msg
Settings
Services
251312906 My-X2a English.book Page 9 Mercredi, 9. juillet 2003 1:46 13
Contents
Page 8
Page 13
Page 14
Page 15
Page 16
MENUS
DESCRIPTION
PRINCIPLES OF NAVIGATION
HOME PAGE
ACTIVATING YOUR PHONE
Information on the SIM card
Installing the SIM card and installing the battery
Changing the cover
Charging the battery
Do NOT obstruct the antenna with your fingers
Page 21
MY PHONE IN 5 MINUTES
Getting started
PIN Number
Setting time and date
Network
First call
Receiving a call
Switching off
Page 25
FIRST SETTING: RING TONE
Volume and ring tone
Page 27
PHONEBOOK
Using the phonebook
Phonebook menu
Call groups
Page 32
MESSAGES
Composing messages
Receiving messages
Inbox
Drafts
Sending options
Memory
251312906 My-X2a English.book Page 10 Mercredi, 9. juillet 2003 1:46 13
Contents
Page 38
WAP
The WAP Menus
Configuring WAP parameters
WAP Logging on
Downloading objects
WAP Logging off
Page 41
GAMES
Picture puzzle
Page 42
SOUNDS
Volume and ring tone
Vibrate
Silent mode
Beeps
Page 44
BACKGROUND
Colours
Wallpapers
Screensavers
Greeting message
Page 46
SETTINGS
Date / Time
My Objects
Languages
Networks
Contrast
Energy saving
Short cuts
Reset settings
Page 50
CALLS
Forward calls
View last calls
Counters
Display number
Call waiting
10
251312906 My-X2a English.book Page 11 Mercredi, 9. juillet 2003 1:46 13
Contents
Automatic redial
Answer phone number
Local info
Page 55
SECURITY
Keypad locking
PIN number
PIN number 2
Phone code
Confidentiality
Operator code
Call barring
Fixed dialling
Page 59
ACCESSORIES
Calculator
Converter
Alarm
Timer
Car kit
Data
Page 63
Page 64
Page 66
Page 69
Page 72
SERVICES
TECHNICAL FEATURES
WARRANTIES
TROUBLESHOOTING
INDEX
11
251312906 My-X2a English.book Page 12 Mercredi, 9. juillet 2003 1:46 13
Your phone package - Accessories
When you open the box, check that all the items are present:
1 - Phone
2 - Mains charger
3 - Battery
4 - User manual
Accessories
You can also find (as an option) or order the following accessories:
Pedestrian kit (*)
Extra battery
Extra charger (*)
Desktop support (*)
Cigar lighter adapter (*)
Colour cover
Hands-free kit (*)
Strap
For more information: www.planetsagem.com
(*) These accessories are identical to the ones provided for the myX-3, myX-5 and myX-6 series.
12
251312906 My-X2a English.book Page 13 Mercredi, 9. juillet 2003 1:46 13
Description
Programmable keys
and Shortcut keys
Stop key:
Hold down: Stop
Press briefly:
In a call context: Rejects a call - hung up
In menus: Return to home page.
Start key: Press briefly: Starts phone
In call context: Call - reception of a call - hands-free mode
Left programmable key:
In home page: Access to certain functions (shortcuts)
In menus: Cancel (or return) as indicated on screen
During call: Reduces volume
Right programmable key:
In home page: Access to certain functions (shortcuts)
In menus: Accept, choose as shown on screen
During call: Increases volume
Top key: Previous choice / increase value / top
Down key: Down choice / reduce value / down
Left key: Up input field / move left
Right key: Down input field / move right
* Key :
Hold down: In home page: Silent mode
Press briefly + OK (right programmable key) activates or deactivates
keypad locking
In call reception mode: Short press stops ring tone
In ring tone setting mode: Activates/deactivates ring tone
# Key: Zoom mode (see message and WAP menus)
13
251312906 My-X2a English.book Page 14 Mercredi, 9. juillet 2003 1:46 13
Principles of navigation
These basic principles bring a great deal of intuitiveness to your phone
All the active areas on a white background (icon selector, programmable
keys, menu selector, choice list)
Accept by pressing the right programmable key
Cancel by pressing the left programmable key
The tabs on the sides at the bottom of the screen refer to the
Programmable keys (and not to the left/right keys).
1st levelBack
Select
In the menus a title bar indicates the down higher level.
Sounds
The down / top
navigation keys are used to navigate from one
menu to the down within the same menu structure.
The right programmable key
menu.
The left programmable key
menu.
2nd levelBack
Select
Volume and ring tone
is used to go from a menu to a subis used to go from a sub-menu to a
The first menu level can be identified by a large animated icon in the
centre of the screen.
The second menu level can be identified by a large static icon in the
centre of the screen.
The lowest sub-menus are lists.
The Stop
key (press briefly) is used to return to the home page
(current function is abandoned).
Back
3nd level
14
OK
251312906 My-X2a English.book Page 15 Mercredi, 9. juillet 2003 1:46 13
Home page
The home page contains the following
Fri 3 May
Menu
1 - The title bar icons:
Battery
Calls forwarded
Call (establishing the call)
Call (hands free)
SMS (reception of an SMS)
Silent mode
Message in answer phonebox
WAP (@)
Home zone
HPLMN / roaming
Keypad locking + WTLS (exclusive functions)
Protected WAP logon
Protected WAP logon icon with certificate
Signal strength level (5 bars).
2 - Date and time, in digital or analogue mode
3 - Network provider
4 - Tab centred on down line:
the main "menu" tab shows that the menu can be accessed via
the down / up
keys.
The following information may also be displayed:
"1 message received"; or "1 call".
They can be deleted by pressing Stop
key briefly.
15
251312906 My-X2a English.book Page 16 Mercredi, 9. juillet 2003 1:46 13
Activating your phone
Information on the SIM card
To use your phone, you have a smart card called a SIM
card. It contains all the information needed by the network
as well as other information unique to you and that you
can modify:
Secret codes (PIN(s): Personal Identification Numbers),
these codes allow you to restrict access to your SIM card.
Phonebook,
Messages,
How special services work.
Your phone is compatible with the different SIM cards
offered by operators.
It is also compatible with the SIM/WIM cards (cards
containing the WIM module in addition (WIM = Wireless
Identity Module)
that is used for secure WAP
communications.
WARNING
This card must be handled and stored with care to avoid damaging it by scraping or bending it. If you should lose
your SIM card, contact your operator or your SMC (Services Marketing Company) immediately.
Comment: do not leave your SIM card within the reach of young children.
16
251312906 My-X2a English.book Page 17 Mercredi, 9. juillet 2003 1:46 13
Activating your phone
Installing the SIM card and installing the battery
The SIM card is inserted under the phone's battery.
Ensure that the phone is switched off and the charger
disconnected.
Turn phone over and remove rear cover by lifting bottom
end first.
Take out battery if already installed.
Slide card fully under retaining plate with gold-plated
contacts facing phone and bevelled corner pointing as
shown on drawing of phone.
Insert battery into position by first positioning top section
with connectors.
Replace cover by engaging top hook first, then push down
back of rear cover.
17
251312906 My-X2a English.book Page 18 Mercredi, 9. juillet 2003 1:46 13
Activating your phone
Changing the cover
18
Remove rear cover as above.
Turn phone over.
Lift front cover in same way as rear cover. Remove panel
(electronic card).
Position keypad in new cover, ensuring it is free of dust.
Insert panel into front cover.
Do as above to replace rear cover.
251312906 My-X2a English.book Page 19 Mercredi, 9. juillet 2003 1:46 13
Activating your phone
Charging the battery
Your phone is powered by a rechargeable battery. A new
battery must be charged for 4 hours at least before being
used for the first time. It reaches its optimum capacity
after a few cycles of use.
When your battery has been discharged, the phone
displays the state (empty battery icon flashes). In this
case recharge your battery for at least 15 minutes before
making any more calls so as to avoid being cut off midcall.
To recharge the battery:
Connect the charger to a mains socket.
Plug the end of the cable into the connector at the base of
the phone.
The phone starts to charge up, the battery charging light
flashes to indicate charging. Charging stops by itself.
Disconnect the cable.
It is possible that the battery may heat up slightly during
charging; this phenomenon is normal.
WARNING
There is danger of explosion if the battery is replaced incorrectly or if it is exposed to fire.
Do not short circuit it.
The battery does not have any part that you can change.
Do not try to open the battery casing.
Use only the appropriate chargers and batteries shown in the manufacturer's catalogue.
Used batteries must be disposed of in the appropriate places.
It is advisable to remove the battery if your phone is not used for extended periods.
19
251312906 My-X2a English.book Page 20 Mercredi, 9. juillet 2003 1:46 13
Activating your phone
Do NOT obstruct the antenna with your fingers
The antenna is integrated in your phone, under the back
cover at the top.
Avoid putting your fingers on this area when the phone is
switched ON.
If your fingers obstruct the antenna, the phone may have
to operate with a higher power level than usual;
decreasing its efficiency quickly. It could also affect the
quality of your communications.
WARNING
The use of a hands-free kit is recommended when using the phone frequently.
20
251312906 My-X2a English.book Page 21 Mercredi, 9. juillet 2003 1:46 13
My phone in 5 minutes
Getting started
You are now ready to use your phone for the first time.
Switch on the phone by pressing the Start
appears.
PIN Number
This is your SIM's secret code.
PIN number?
****
Delete
key. A short display
OK
If access to the SIM card is protected, the device prompts you to enter
the PIN number:
Enter the code between 4 and 8 digits given to you when the SIM card
was issued. These digits do not appear on the screen for security
reasons.
Press the right programmable key
to accept.
If your phone indicates that the SIM is missing, press the Stop
key
to switch off your phone and check that the SIM card is correctly installed.
WARNING
If a wrong PIN number is entered three times in succession, your SIM card is blocked. You must then:
- Enter "**05*".
- Enter the PUK (Personal Unblocking Key) code provided by your operator, and accept.
- Enter your PIN number and accept.
- Enter your PIN number again and accept.
After 5 or 10 failed attempts (depending on the type of SIM card), the SIM card is definitely locked. You must then
contact your operator or your SMC to obtain a new card.
21
251312906 My-X2a English.book Page 22 Mercredi, 9. juillet 2003 1:46 13
My phone in 5 minutes
Setting time and
date
When you use your phone for the first time, you need to set the date and
time.
In due course, when the battery is completely discharged, or if it has been
removed, you will be prompted systematically to confirm date and time.
Time and date
Date valid?
Friday
03 May 2002
Cancel
OK
Setting the date:
Set the date by entering it directly in numerical form or by using the
down / up
keys to decrease or increase the default values.
Use the right key
(or left key
) to access the next (or last ) data input
field.
Once the date is correct, press the right programmable key
to
accept.
Setting the time: Same procedure as for setting the date.
Network
From now on the phone hunts for a network on which it can make calls.
If it finds one, it displays the name of the network on the screen. You are
then ready to send or receive a call.
If the network icon appears, calls are possible on your operator's network.
If the letter R and a network name are displayed, calls are possible on the network of a different operator.
If the letter R is displayed without any network name, only the emergency services are accessible (ambulance,
police, fire brigade).
If the network icon flashes, the phone is in permanent search mode. There is no network available. The signal
strength indicator received allows you to display the quality of reception. If it indicates less than three bars,
search for better reception in order to call in good conditions.
22
251312906 My-X2a English.book Page 23 Mercredi, 9. juillet 2003 1:46 13
My phone in 5 minutes
First call
Dial the number of your correspondent.
Press the Start
key.
During the call, the call in progress icon flashes on screen and tones may
indicate the establishment of the call.
Once communication has been established, the call icon stops flashing.
You can adjust the sound level (volume) using the left and right
keys.
programmable
At the end of the conversation press the Stop
key to hang up.
International call
Press 0 (hold down) to display "+", then dial the country code without waiting for the dial tone, then the number of
the called party.
Emergency services
Depending on the operators you can obtain the emergency service with or without SIM card or when the keypad
is locked. It is enough to be in an area served by a network.
To obtain the international emergency service, dial 112 then press the Start
key.
23
251312906 My-X2a English.book Page 24 Mercredi, 9. juillet 2003 1:46 13
My phone in 5 minutes
Receiving a call
When you receive a call, the number of your correspondent is
displayed when it is presented by the network.
Call from
0605030401
Busy
Select
Press the Start
answer, and speak.
key or the right programmable key
To refuse the call, press the Stop
key
to
key or the left programmable
To stop the ring tone or the vibrate, without refusing the call, press
the
key.
WARNING:
Pressing the Start key a second time launches hands-free mode, in
this mode do not bring the phone up to your ear.
All the numbers corresponding to incoming and outgoing calls are logged
in the list of recent calls.
Switching off
Press the Stop
key for one second.
The end message is displayed. The phone switches off.
24
251312906 My-X2a English.book Page 25 Mercredi, 9. juillet 2003 1:46 13
First setting: Ring tone
We want to familiarise you with the interface of your new phone, using a
simple setting: choosing a ring tone and adjusting the volume.
Volume and ring
tone
This menu allows you to allocate a ring tone to each type of event.
In the home page, press the down
key to access the main menus.
The first menu offered is Phonebook.
Press the down
key four times to access the Sounds menu.
Enter this menu by pressing the right programmable key
Back
Select
You can access the second level of the menu that contains four submenus: Ring tones, Vibrate, Silent mode, beeps.
Messages
The first sub-menu offered is Ring tones.
Enter by pressing the right programmable key
Back
Select
25
251312906 My-X2a English.book Page 26 Mercredi, 9. juillet 2003 1:46 13
First setting: Ring tone
Draft
T9
With the help of the down / up
keys select the type of
function where you want to change the ring tone from the proposed
list (Alarm, Calls, Messages and Fax) and accept.
Enter by pressing the right programmable key
Delete
Using the down / up
offered.
keys select the ring tone from the list
Enter by pressing the right programmable key
For every new selection, you will hear the corresponding ring.
If required, press the Silent mode key
to cancel the sound.
Delete
Draft
T9
Adjust the volume using the down / up
keys.
The volume is adjusted over a scale of 1 to 4.
The ring tone is played at the chosen level whenever a change is made.
You can select "+" volume to choose a ring that starts quietly and rises
to a crescendo.
Accept by pressing the right programmable key
Delete
26
Options
251312906 My-X2a English.book Page 27 Mercredi, 9. juillet 2003 1:46 13
Phonebook
The phonebook allows you to store numbers that you call regularly.
These numbers can be stored in the SIM card or in the phone.
The list of numbers in the
phonebook of the SIM card
varies in relation to the
capacity of the card: the
supplier company will tell you
what this is.
Different icons inform you of the position of the phonebook where the
number is stored:
Your SIM card phonebook
Your phone phonebook
Your SIM card's fixed dialing.
Using the phonebook
In the home page press the down
The first menu offered is phonebook.
Phonebook
Press the right programmable key
tab to enter the menu.
key to access the main menus.
corresponding to the accept
The list of your correspondents appears, by default, the cursor is
positioned on the first name in alphabetical order.
If you are using your phone and SIM card for the first time, the phonebook
list will be empty, only the Phonebook Menu function will be available.
Back
Options
Select a contact from the list using the down / up
press the right programmable key
keys. Then
27
251312906 My-X2a English.book Page 28 Mercredi, 9. juillet 2003 1:46 13
Phonebook
You can also enter a letter to access directly the first contact starting with
this letter.
If you know the memory number of this contact on the SIM card (say 21
for example), you can enter 21# directly.
Choose from the options offered:
See contact
The first menu offered is See contact. Enter.
The detail of the store appears (location, call group, name, number).
Phonebook
Modify contact
Modify contact. Enter. Using the down
Modify name if required, and Accept.
Modify number if required, and Accept.
Modify call group if required, and Accept.
Back
OK
key.
Delete
Select Delete. Enter.
Confirm deletion of entry with Yes.
Call
Select Call. Press the right programmable key
See contact
to start the call.
You can also select the party to be called from the phonebook, and press
the Start
key to make the call.
Send message
Select Send message. Accept.
Text editor opens automatically.
Back
28
OK
251312906 My-X2a English.book Page 29 Mercredi, 9. juillet 2003 1:46 13
Phonebook
The phonebook menu allows you to create new contacts, to create call
groups and to check the memory available to store new contacts.
Phonebook menu
Phonebook
In the Phonebook menu, press the right programmable key
to
enter the menu.
Press the up
key to position the cursor on the Phonebook menu
and accept.
Choose from the options offered add contact, call group, memory, my
numbers).
Phonebook
Add contact
Select Add contact and accept and press the right programmable
key
to enter the menu.
Choose the place where you wish to enter the contact (SIM card or
phone) using the down / up
keys, and accept.
Enter name of your correspondent and accept.
Enter phone number and accept.
Choose a call group to which you want to allocate this contact and
accept. (See page 31: Call groups)
Back
OK
29
251312906 My-X2a English.book Page 30 Mercredi, 9. juillet 2003 1:46 13
Phonebook
Phonebook menu
Call groups (See page 31)
Memory
Select memory and accept.
The screen displays the number of free locations on SIM card and in
phone itself.
Back
OK
My numbers
You can create the entries corresponding to your own numbers in order
to consult them when necessary.
Select My numbers and accept.
Enter the different details and accept.
30
251312906 My-X2a English.book Page 31 Mercredi, 9. juillet 2003 1:46 13
Phonebook
You have the facility to group your contacts into call groups.
It is possible to allocate characteristics to each group (icon, ring tone,
vibrate).
Call groups
6 default call groups have already been created. You can create others.
Phonebook
Creating new groups:
Do same as above to obtain the phonebook menu and accept.
Press down
key to position the cursor on Call groups and enter.
By default, the cursor is placed on Call groups menu, accept.
Choose one of the options offered (Create group or memory available).
Back
Options
Call groups
Creating a group
By default, the cursor is placed on Create group, enter.
Enter group name and accept.
Choose the icon, ring tone and vibrate mode that you want to allocate
to this group (accept after each step).
Memory
Select memory and OK.
The screen displays the number of locations available for new groups.
Back
OK
31
251312906 My-X2a English.book Page 32 Mercredi, 9. juillet 2003 1:46 13
Messages
The message menu brings together the following two types of messages:
SMS and EMS (an EMS is an extended message, longer than an SMS
with images and sounds added). It is possible to exchange different types
of contents: text, call group icons, screen backgrounds, tunes, WAP
bookmarks..
Composing
messages
Messages
This menu allows you to compose your messages.
From the Messages menu select the Compose menu and enter.
By default, the language used is the language activated in the phone's
menu display (or English if a language not supported by Easy Message
T9™ has been chosen for the menus).
When the text has been entered, the right programmable key
(choice) can also be used to access the functions offered:
This menu has been
compiled in collaboration with
32
Send is used to send the message by entering the correspondent's
number.
T9 options (see next page)
ABC mode (see page 34)
123 mode (see page 34)
Cancel is used to delete all text entered
Activate/deactivate zoom is used to modify size of characters
Store is used to save a draft in memory
Formatting is used to enrich a text
Insert to insert an image or sound into your message
(see page 34).
251312906 My-X2a English.book Page 33 Mercredi, 9. juillet 2003 1:46 13
Messages
The Easy Message T9™ helps you to conveniently enter your short
messages.
Messages
Drafts
T9
Using T9 Mode
Press once the key corresponding to the letter chosen and make the
word by continuing to press the keys corresponding to the various letters
without paying attention to the display, until you have finished inputting
the word: it then appears in inverse video.
If the word offered is what you wanted to enter, press the 0 key to
accept it, create a space and move to the next word.
Back
OK
Drafts
T9
However, it is possible that several words exist in the corresponding
dictionary for the same sequence of keys pressed. If the word that
appears is not the word you expected, press the right programmable
indicating
to scroll through the words held in the
key
dictionary corresponding to this key sequence.
When you find the chosen word, press the 0 key to accept it, create a
space and move on to the down word.
Press the right key to simply accept the characters entered without
creating a space and moving on to another T9 word.
Back
OK
If the word you are expecting is not proposed, please go on adding
characters until you get the message “Add a word?”. Select “Yes”, correct
the word when necessary and press ”OK”.
33
251312906 My-X2a English.book Page 34 Mercredi, 9. juillet 2003 1:46 13
Messages
In the input screen, the right programmable key
other input options.
When composing a message:
The navigation keys assume the
following functions:
- Left key
Last word
- Right key
Next word
- Up key
Previous line
- Down key
Next line
- Left programmable key
Deletes last letter
- Right programmable key
Message options
key:
- Hold down
Zoom mode (changes size of
characters)
key:
- Short press of
Access to symbol table
34
is used to access
Input modes
The ABC mode is used to enter words that do not exist in the dictionary.
To obtain a letter, press the corresponding key several times, the letters
and the number scroll past.
Mode 123 is used to insert numbers.
Insert mode is used to insert symbols, animations, call group icons and
tunes: the SMS then becomes an EMS. Images and sounds can be two
types: pre-defined or customised. Pre-defined images and sounds are
smaller in size, especially suited to exchanging messages.
Upper case:
A quick touch of the
key will display the next letter in upper case.
Two short presses on the
key allow you to switch to upper case
editing mode for the whole message.
Punctuation characters
Punctuation characters are obtained with the help of key 1 (except in 123
mode), or with the help of Insert mode (fast access via the
key).
Accented characters
Accented characters are generated automatically in T9™ mode.
In ABC mode accented characters are available by pressing the key
supporting the non-accented character in succession.
251312906 My-X2a English.book Page 35 Mercredi, 9. juillet 2003 1:46 13
Messages
The number of messages stored in the SIM card varies depending on the
card's capacity.
Receiving messages
When you receive a message, an audio signal sounds (the one selected
in the Sounds menu) and the message icon appears on your phone
screen.
Fri 3 May
Receiving icons, backgrounds or tunes can take several seconds.
Messages inform you of the progress of the download.
Menu
Back
If you do not read the messages, this icon remains displayed on the
screen. When it flashes, the memory is full.
OK
You have the facility to do the following at any time:
- To mask this progress screen by pressing the left programmable key
to make a call or access other phone information.
- Or stop the download in progress by pressing the right programmable
key
Consult your network operator on the downloading of icons, backgrounds
or tunes.
35
251312906 My-X2a English.book Page 36 Mercredi, 9. juillet 2003 1:46 13
Messages
Received messages are stored in the SIM card or in the phone until you
choose to delete them.
Inbox
Messages
Back
OK
From the Messages menu choose the Inbox menu and Select.
Each message contains information on type of message (in the form of
an icon) and time (or date) of reception.
Unread messages are entered in bold and arranged by arrival time and
date.
Select a message and press the right programmable key
Choose from the options offered (Read, Forward, Delete read, reply,
reply with original message, call, send, delete, delete all).
If your message contains objects (images or sounds), you can save them
in order to use them later (stored in your phone's memory); when reading
text, place the cursor on the object and choose the Save option from the
options on the right programmable key
When they have been stored in memory, the space required in the phone
is then indicated.
You can consult them in the corresponding menus (WAP bookmarks in
WAP, tune in Sounds, backgrounds in Background, and icons in Call
groups).
Drafts
When you store a composed message, it is stored among the drafts.
Messages
From the Messages menu choose the Drafts menu and Select.
Select a message and press the right programmable key
. If you
do not delete this message, it will remain as a draft and can be re-used
even if you have already sent it.
Choose from the options offered (Read, Send, Delete, Delete all, Modify).
Back
36
OK
251312906 My-X2a English.book Page 37 Mercredi, 9. juillet 2003 1:46 13
Messages
Sending options
Several sending options are offered.
Messages
From the Messages menu choose the Options menu and Select.
From the send options offered (acknowledgement, reply offered, period
of validity - life cycle of message on network before being routed -,
message format, message centre).
Memory
You may want to know the memory available for saving messages.
Messages
From the Messages menu select the Memory menu and Select.
The screen shows you the memory available on the SIM card and in the
phone.
37
251312906 My-X2a English.book Page 38 Mercredi, 9. juillet 2003 1:46 13
WAP
WAP (Wireless Application Protocol): protocol that translates the Internet
language into WML language that can be read by a phone. The WAP
function allows you to log onto certain Internet sites. You can log onto
sites that allow you to download tunes, icons or animated screensavers
to your phone.
The WAP Menus
The WAP navigator is under
licence:
The Services menu, a dropdown menu, can be accessed at all times
when navigating through WAP pages.
Select the top left icon using the
The WAP navigator is the exclusive
property of Openwave. For this
reason, it is forbidden to modify,
translate, disassemble or even
decompile all or part of the software
that makes up the navigator.
You can activate the magnifying
glass to increase the size of the
characters by holding down the
# key.
38
up key.
Consult the menu using the right programmable key.
The Services menu contains all the following sub-menus:
Welcome: logs onto the home page.
(carries the name of your access provider)
Bookmarks: is used to save in a phonebook the names and addresses
of Internet sites to facilitate easy access.
You can receive bookmarks from SMS and add them to this list (see
chapter on SMS).
You can also send messages by SMS: select a bookmark, press the
right programmable key (Choice), then select Send by SMS.
Go to URL: this menu allows you to input an Internet address directly.
Inbox: this menu allows you to consult messages sent by the Internet
site.
Save image: is used to save a WAP site image (option).
Reload: refreshes the current page.
Clear the cache: clears the stored information on previous logons.
251312906 My-X2a English.book Page 39 Mercredi, 9. juillet 2003 1:46 13
WAP
Advanced…: offers the following advanced settings
- Configuring parameters
- Show URL
- Logoff
- Circuit message (if user can confirm each logon)
- Security (is used to access information on making WAP connections
secure).
About…: information on the browser.
Exit: returns to the phone's home page.
Configuring WAP parameters
Select the Advanced… menu, then the configuration menu.
Choose from the sub-menus offered:
Logon parameters is used to select or modify your access provider's
logon parameters or configure the parameters of other access providers.
The active access service is preceded with a start.
Configuration of WAP parameters:
All information to be entered in the parameters are provided by your
operator or access provider.
- Choose desired access service, then press Choice.
- Enter title of service and accept.
- Enter Internet address of home page and accept.
The GSM parameters to be entered are:
- User name
- Password
- IP address of WAP gateway
- Port type (secure or insecure)
- Call number
- Access mode (digital, analogue or automatic)
In automatic mode access can be gained to the operator's network by a
digital link and by an analogue link to a different network (in roaming).
39
251312906 My-X2a English.book Page 40 Mercredi, 9. juillet 2003 1:46 13
WAP
Once all the settings have been entered, you can activate the chosen
access provider. Select him from the list. Confirm your choice with OK.
Inactivity time is used to choose the time after which the call is
automatically disconnected if you have forgotten to log off from a service.
WAP Logging on
Using the Welcome menu, you can log onto your access provider's
WAP site by pressing the right programmable key
If you are logging onto the GSM network, the @ symbol flashes, the
metering of the cost of the call starts as soon as it stops flashing.
Downloading objects
Some WAP sites allow you to download ring tones, icons or animated
screensavers. Once downloaded, they are stored in your phone's
memory. You can then save them in your phone (same operation as used
for downloading using SMS).
WAP Logging off
To log off press Stop
key.
The logoff happens automatically after a few seconds of inactivity if you
forget to log off.
This period is defined by the inactivity time setting.
40
251312906 My-X2a English.book Page 41 Mercredi, 9. juillet 2003 1:46 13
Games
Picture puzzle
Your phone is supplied with the game: Picture puzzle.
Games
Back
From the Picture puzzle menu press Select.
On line help is supplied to use the game.
Select
41
251312906 My-X2a English.book Page 42 Mercredi, 9. juillet 2003 1:46 13
Sounds
This menu allows you to customise the ring tones on your phone and to
activate beep and vibrate modes.
Volume and
ring tone
This menu allows you to allocate a ring tone to each type of event.
Sounds
From the Sounds menu choose Ring tone menu and Select.
Select the type of event from the list offered (Alarm, Calls, Messages
and Fax) and accept.
Select the ring tone from the list offered and accept.
Adjust the volume using the down / up keys and accept.
Back
Select
You can deactivate the sound by pressing the
key.
Vibrate
This menu allows you to activate the vibrate mode for calls.
Sounds
From the Sounds menu choose the Vibrate menu and Select.
Select the vibrate mode from the choices offered (ring tone and vibrate,
vibrate only, vibrate inactive or vibrate plus ring tone) and accept.
Back
42
Select
251312906 My-X2a English.book Page 43 Mercredi, 9. juillet 2003 1:46 13
Sounds
WARNING: vibrate mode is not a priority in relation to the choice of ring
tones in the call groups. To make vibrate mode apply in general, switch
to Silent mode.
Silent mode
This menu allows you to switch to Silent mode.
Sounds
From the Sounds menu select Silent mode and Select.
Activate or deactivate Silent mode and accept.
Silent mode can also be accessed via the home page by holding down
the
key.
Back
Select
When the device is in silent mode, the relevant icon appears on the
home page.
In this mode the ring tone will not function, except for the alarm clock..
Beeps
This menu allows you to activate a beep for each type of event.
Sounds
From the Sounds menu choose the Beeps menu and Select.
Select the type of beep you want to allocate from the choices offered (Key
beep, Network beep or Battery beep) and accept.
Activate or deactivate the beep and accept.
In the case of key beeps, you can also choose from the two types of
beeps offered: key beeps or Dtmf tone (different beep depending on the
key pressed).
Back
Select
43
251312906 My-X2a English.book Page 44 Mercredi, 9. juillet 2003 1:46 13
Background
This menu allows you to customise your screen by choosing the colour,
background image, animation or greeting message.
Colours
This menu allows you to display the colours you want on your phone.
Background
From the Background menu select the Colours menu and Select.
Select the colour you want to see during navigation from the menus and
accept.
Back
Select
Wallpapers
This menu allows you to display the background image you want on your
phone.
Background
From the Background menu select the Wallpapers menu and Select.
Select the Wallpaper and Select (right programmable key
image appears in the background of the home page.
). The
Press the right programmable key
to select this choice, or the left
programmable key
to return to choice.
Back
44
Select
251312906 My-X2a English.book Page 45 Mercredi, 9. juillet 2003 1:46 13
Background
Screensavers
This menu allows you to display an animation when the phone is in standby
mode.
Background
From the Background menu select the Screensavers menu and
Select.
Select a screensaver from the options offered and accept.
The chosen screensaver appears on the screen, accept it.
Adjust the screensaver display time (greater than 60 seconds) and
accept. The screensaver appears at the end of each period of inactivity.
Back
Select
Warning: the animated screensaver uses processing power. For a better
efficiency you can deactivate the screen saver or select the activation
time to be more than every 300s.
Greeting message
This menu allows you to customise your greeting message.
Background
From the Background menu select the Greeting msg menu and Select.
Enter the text that you want to see appear in the greeting message (when
you switch on) and accept.
Back
Select
45
251312906 My-X2a English.book Page 46 Mercredi, 9. juillet 2003 1:46 13
Settings
This menu allows you to customise the settings of your phone to make it
as convenient as possible for you to use.
Date / Time
Settings
This menu allows you to set the date and time of your phone.
From the Settings menu select the Date / Time menu and Select.
Date: set the date by entering it directly in digital form or by using the
down / up
keys.
Use the right key
(or left
) to access the next (or last) input
field.
Once the date is correct, accept it.
Time: same procedure as for setting the date.
Back Select
My Objects
Settings
This menu allows you to find out how much memory is available for objects.
From the Settings menu select the My objects menu and Select.
The amount of memory available is displayed. This memory is divided
between your downloaded ring tones, wallpapers and screensavers.
You can delete your objects to increase the memory available for new
downloads.
Back Select
46
251312906 My-X2a English.book Page 47 Mercredi, 9. juillet 2003 1:46 13
Settings
Languages
Settings
This menu allows you to choose your phone's display language.
From the Settings menu select the Languages menu and Select.
Select the language of your choice and accept.
If you select Automatic, the display language will be the language of
your SIM card.
Back Select
Networks
Settings
This menu allows you to configure network preferences.
From the Settings menu select the Networks menu and Select.
Choose Preferred to view all the pre-registered networks.
Choose Selection to activate (automatically or manually) one of the
networks accessible in the area in which your are located.
Back Select
47
251312906 My-X2a English.book Page 48 Mercredi, 9. juillet 2003 1:46 13
Settings
Contrast
This menu is used to adjust screen contrast.
From the Settings menu select the Contrast menu and Select.
A test screen allows you to adjust the contrast by means of the down / up
keys and enter.
Back Select
Energy saving
This function is used to deactivate the screen backlight.
From the Settings menu select the Energy saving menu and Select.
Activate or deactivate the backlight and accept.
By deactivating the screen backlight you increase the battery life of your
phone.
WARNING: display legibility is reduced.
Back Select
48
251312906 My-X2a English.book Page 49 Mercredi, 9. juillet 2003 1:46 13
Settings
Short cuts
This menu allows you to allocate functions to the programmable keys.
From the Settings menu select the Short cuts menu and Select.
Select the key that you wish to modify and accept.
Choose the function that you want to allocate to this key and accept.
Back Select
Reset settings
This menu allows you to reset all your phone's settings.
From the Settings menu select the Reset settings menu (RES) and
Select.
WARNING: you are about to lose all the downloaded objects
and all the settings made on your phone since you bought it.
A validation screen allows you to confirm this choice.
The phone switches off and resets automatically when powered up to
take account of the change of settings.
Back Select
49
251312906 My-X2a English.book Page 50 Mercredi, 9. juillet 2003 1:46 13
Calls
The Calls menu allows you to manage and consult all your phone's
incoming and outgoing calls that are marked as follows:
Incoming call
Outgoing call
Forward calls
This menu allows you to transfer calls addressed to you.
Depending on your subscription, this service allows you to re-direct
incoming calls to a different number or answer phonebox.
From the Calls menu select the Calls Forwarded menu and Select.
Choose the type of forwarding you want from the options available.
Back Select
50
251312906 My-X2a English.book Page 51 Mercredi, 9. juillet 2003 1:46 13
Calls
Fast access to the list of calls from the home page: press the Start
key.
View last calls
This menu allows you to access the list of last numbers used.
From the Calls menu select the View last calls menu and Select.
Each call contains information on type of call (in the form of an icon), time
(or date) and duration.
Select a call from the list and accept.
Choose from the options offered (Call, store in your phonebook, send a
message, delete, delete all).
You can also make the call by pressing the Start
key.
Back Select
Counters
This menu allows you to consult the duration of the outgoing calls.
From the Calls menu select the Counters menu and Select.
Choose the type of counter you want from the options offered.
Back Select
51
251312906 My-X2a English.book Page 52 Mercredi, 9. juillet 2003 1:46 13
Calls
Display number
This menu allows you to modify the status of the display number function.
From the Calls menu select the Display number menu and Select.
Choose from the options offered (Anonymous mode, My number, Caller’s
number).
Anonymous mode
You have the facility to mask your number on the phone from the person
you are calling.
Initial: network default mode.
Back Select
No: you choose not to activate anonymous mode and so to display your
number.
Yes: you choose to active anonymous mode and so not to display your
number.
52
251312906 My-X2a English.book Page 53 Mercredi, 9. juillet 2003 1:46 13
Calls
During a call you may be informed that a caller is trying to reach you: you
hear a special tone. The caller's number is displayed on the screen (or
the caller's name if it has been stored).
Call waiting
(Operator-dependent service)
From the Calls menu select the Call waiting menu and Select.
You can activate, deactivate, or consult the status of the call waiting
service in order to check if it is active or not.
During a call, if a second caller tries to contact you, the screen displays
the call warning.
Back Select
Automatic redial
This menu allows you to call back a person you tried to reach.
From the Calls menu select the Automatic redial menu and Select.
You can set the redial function to inactive, on demand or systematic.
If you choose On demand, your phone will offer to redial your caller
automatically if the number is busy.
Back Select
53
251312906 My-X2a English.book Page 54 Mercredi, 9. juillet 2003 1:46 13
Calls
Answer phone
number
This function is used to set your answer phone number.
This number will be used when you make a call from the answer
phonebox using the programmable keys.
From the Calls menu select the Answer phone number menu and
Select.
Enter your answer phone number and accept.
Back Select
Local info
This menu is used to activate reception of local information broadcast by
the network.
You can choose whether or not to receive information (ask the company
with which you took out your subscription).
From the Calls menu select the Local info menu and Select.
Back Select
54
251312906 My-X2a English.book Page 55 Mercredi, 9. juillet 2003 1:46 13
Security
This menu allows you to configure your phone's security settings.
Keypad locking
This menu allows you to lock the keypad.
From the Security menu select the Lock keypad menu and Select.
Select Activate or deactivate and accept.
The lock icon appears on the home page.
This function is also available in the home page via a combination of the
).
and Select keys (right programmable key
Back Select
PIN number
This menu allows you to activate and modify your phone's PIN.
From the Security menu select the PIN number menu and Select.
To modify the PIN, select Modify and Select.
Enter old PIN and accept.
Enter new PIN twice and accept.
To activate or deactivate the PIN, select the Check PIN menu and
Select.
Enter PIN and accept.
Select Activate or Deactivate and accept.
Back Select
55
251312906 My-X2a English.book Page 56 Mercredi, 9. juillet 2003 1:46 13
Security
The Phone code menu allows you to activate the phone code so that it
is requested and checked whenever the phone is switched on if a
different SIM card is used. This code is automatically linked to the SIM
card installed when the phone is activated.
PIN number 2
You have a second PIN number to allow you to access certain functions*.
* This function may or may not be available depending on your SIM card.
Proceed as above in order to activate, deactivate or modify PIN number 2
of your phone.
Back Select
Phone code
The phone code is a secret code intended to protect the phone if stolen.
To activate or deactivate the phone code, select the Phone code menu
and accept.
Enter 0000 and accept.
Select Activate or Deactivate and accept.
To modify the phone code, select Modify and accept.
Enter old phone code and accept.
Enter new phone code and accept.
Enter phone code again to verify it and accept.
Back Select
56
251312906 My-X2a English.book Page 57 Mercredi, 9. juillet 2003 1:46 13
Security
The Confidentiality function is used to delete numbers stored in View
last calls and the SMS stored in the memory when a new SIM card is
inserted into the phone.
Confidentiality
From the Security menu, select the Confidentiality menu and Select.
Select Activate or Deactivate and accept.
Back Select
Operator code
This menu allows you to modify the call barring.
From the Security menu, select the Operator code menu and Select.
Access to this service depends on your type of subscription.
Back Select
57
251312906 My-X2a English.book Page 58 Mercredi, 9. juillet 2003 1:46 13
Security
Call barring can be applied to ALL calls (incoming and outgoing), to all
incoming calls when you are away from your home country (if roaming
available).
Call barring
This menu allows you to block the sending or reception of certain calls.
Before you can use this service, a password will be provided by your
operator when you take out your subscription.
From the Security menu, select the Call barring menu and Select.
Select Activate or Deactivate and accept.
Access to this service depends on your subscription type.
Back Select
Fixed dialling
This menu allows you to restrict the sending of calls.
From the Security menu, select the Fixed dialling menu and Select.
Enter PIN number 2 and accept.
Select Activate or Deactivate and accept.
Proceed as for any other phonebook.
By activating this function, you can send calls only to the numbers stored
in this phonebook.
This phonebook is linked to the SIM card, and its size depends on the
card's capacity.
Back Select
58
251312906 My-X2a English.book Page 59 Mercredi, 9. juillet 2003 1:46 13
Accessories
This menu allows you to access the various accessories offered by your
phone: calculator, converter, alarm, timer, car kit, data parameters.
Calculator
This menu allows you to use your phone as a calculator.
From the Accessories menu, select the Calculator menu and Select.
You can use the calculator with the help of the following keys:
Up key: Add
Down key: Subtract
Right key: Multiply
Back Select
Left key: Divide
Right programmable key: Equals
Left programmable key: Delete
* key or #: Decimal point.
If no calculations are being run, the Right programmable key
allows you to use the value in the converter directly.
59
251312906 My-X2a English.book Page 60 Mercredi, 9. juillet 2003 1:46 13
Accessories
Converter
This menu allows you to convert one currency to another .
From the Accessories menu, select the Converter menu and Select.
to convert from one currency to
Enter a value and press the Up key
another, or the Down key
to convert back.
The right programmable key
options:
Back Select
allows you to use the following
Rapid exchange
If you check the Rapid exchange box, the converter will work in the home
page by entering the desired numbers and pressing the up / down
keys to make the conversion.
Exchange rate
Enter the rate of exchange corresponding to the chosen currencies.
Currencies
Enter the two types of currencies to be converted.
Go to calculator
This option allows you to immediately use the value converted in
the calculator.
60
251312906 My-X2a English.book Page 61 Mercredi, 9. juillet 2003 1:46 13
Accessories
The alarm works even when the phone is switched off.
Alarm
This menu allows you to set and activate the alarm.
From the Accessories menu, select the Alarm menu and Select.
Activate or Deactivate the alarm and accept.
Set the waking time by entering the numbers directly or using the
down / up
keys and accept.
The alarm icon appears on the home page.
Back Select
Timer
This menu is used to set and activate the timer.
From the Accessories menu, select the Timer menu and Select.
Activate or Deactivate the alarm and accept.
Set the duration by entering the numbers directly or using the down / up
keys and accept.
The alarm icon appears on the home page.
Back Select
61
251312906 My-X2a English.book Page 62 Mercredi, 9. juillet 2003 1:46 13
Accessories
Car kit
This menu allows you to configure your phone with a car kit.
From the Accessories menu, select the Car kit menu and Select.
Choose from the options offered (Automatic response, Switch off, Alarm
timing, Hands-free volume control).
Back Select
Data
This menu is used to configure the data exchange with a Personal
Computer.
From the Accessories menu, select the Data parameters menu and
Enter.
Choose the correct speed depending on the Personal computer you
would like to connect to the handset.
Back Select
62
251312906 My-X2a English.book Page 63 Mercredi, 9. juillet 2003 1:46 13
Services
This menu allows you to access numerous services offered by your
operator. The list of these services will appear in the menu depending on
your subscription.
Services
This menu allows you to access your operator's basic services.
From the Services menu, choose from the list offered.
63
251312906 My-X2a English.book Page 64 Mercredi, 9. juillet 2003 1:46 13
Technical features
Use of your phone is subject to safety measures designed to protect users and their environment.
Electrical safety:
Only use those chargers listed in the manufacturer’s catalogue. Using any other charger may be dangerous; it would also
invalidate your warranty. Line voltage must be the same as that indicated on the charger’s serial plate.
Aircraft safety:
You must switch off your phone on aeroplanes when so instructed either by cabin crew or by signs. Mobile phone use may be
dangerous to the operation of the aircraft and may disrupt the phone network.
Explosive materials:
Please comply with signs at petrol stations telling you to switch off your phone. You must also observe radio equipment usage
restrictions in chemical plants, fuel depots and at any location where blasting operations are under way.
Electronic medical equipment:
Your phone is a radio transmitter which may interfere with electronic medical equipment such as hearing aids, pacemakers, etc.
Your doctor or the manufacturers of such equipment will be able to give you any advice you may need in this area. Always make
sure that your phone is switched off in hospitals when so instructed by signs or by medical staff.
Road safety:
Except in emergencies, do not use your phone when driving unless you have a hands-free kit enabling you to manoeuvre freely.
In order to give your full attention to driving, stop and park safely before making a call. You must comply with any current
legislation.
This mobile phone complies with European requirements governing exposure to radio waves.
Your phone is a transmitter/receiver. It has been designed and manufactured to comply with radiofrequency energy exposure
limits recommended by the Council of the European Union and the ICNIRP for the entire population. These limits were
established by independent scientific agencies on the basis of in-depth and regular evaluations of scientific studies. The limits
include a large safety margin that is intended to guarantee the safety of all, irrespective of age or state of health.
The exposure standard for mobile phones uses a unit of measure called the SAR, or Specific Absorption Ratio. The SAR limit
recommended by the Council of the European Union and the ICNIRP is 2 W/kg*. Tests were conducted on a standardised usage
position basis, with the phone transmitting at its maximum level certified in all its frequency bands. Although the standardised
measurement is done at maximum power, the real SAR of the phone in use is generally very far below the maximum value. The
phone was designed to operate at the power level strictly necessary to ensure communication with the network. In general, the
closer you are to a base station, the lower the power at which the phone will transmit.
Validation of conformity with European directive 1999/5 (directive R&TTE) is a pre-requisite for introducing any model of phone
onto the market. Protection of health and the safety of the public and the user are a vital requirement of this directive.
This model's maximum SAR value measured in the conformity test is 0.64 W/kg.
Although differences may exist from one phone to the other and depending on position, all comply with European regulations.
In the countries that have adopted the SAR limit recommended by FCC (USA, Taiwan…), the limit is 1.6 watt/kilogram (W/kg)
averaged over one gram of tissue.
The highest SAR value for this model phone when tested for compliance against the standard was 1.2 W/kg.
While there may be differences between the SAR levels of various phones and at various positions, they all meet the
requirements for RF exposure.
64
251312906 My-X2a English.book Page 65 Mercredi, 9. juillet 2003 1:46 13
Technical features
Advice for limiting exposure to radiofrequency (RF) fields
For individuals concerned about limiting their exposure to RF fields, the World Health Organization (WHO) provides the
following advice:
Precautionary measures: Individuals: Present scientific information does not indicate the need for any special precautions for
the use of mobile phones. If individuals are concerned, they might choose to limit their own or their children’s’ RF exposure by
limiting the length of calls, or using "hands-free" devices to keep mobile phones away from the head and body.
Further information on this subject can be obtained from the WHO home page http://www.who.int/peh-emf WHO Fact sheet
193: June 2000.
*The SAR limit for phones used by the general public is 2 watts/kilogram (2 W/kg) on average for 10 g of tissue. This value
includes a large safety margin to increase protection and to take account of the variations in measurements. The SAR
information may vary in different parts of the world, depending on declared national requirements and the frequency bands used
by the network.
65
251312906 My-X2a English.book Page 66 Mercredi, 9. juillet 2003 1:46 13
Warranties
Usage precautions
Your mobile phone allows you to download ring tones, icons and animated screensavers. Some of these items may contain
data that may cause malfunctions of your mobile phone or data losses (virus for example).
For this reason, Sagem rejects all responsibility concerning (1) the reception of downloaded data or losses of the said data, (2)
the impact on the operation of the mobile phone and (3) damages resulting from receiving the said downloaded data or loss of
said data. In addition, Sagem states that a failure caused by receiving downloaded data that do not comply with the
specifications set by Sagem is excluded from the warranty. Consequently, the diagnosis and repair of a phone infected by the
said downloaded data will be at the expense of the customer.
Warranty conditions
Whenever you wish to make use of the warranty, please contact your vendor and present him with the purchasing paperwork that he
gave you.
If a fault occurs, he will advise you.
If you bought your phone directly from SAGEM SA, the following rules will apply:
1.
The new equipment (excluding consumables), including new accessories bundled with the phone, are guaranteed by SAGEM
SA, parts and labour (apart from travel) against any manufacturing fault for a period of twelve (12) months with effect from the
sale of the equipment by SAGEM SA to the customer, on presentation of the paperwork stating the purchase date of the
equipment.
Equipment that has been repaired or replaced as standard during the warranty period stated above is guaranteed (parts and
labour) until the later of these two dates:
Expiry of the guarantee period of twelve (12) months stated above or three (3) months with effect from the support provided by
SAGEM SA.
In any disputes, the equipment is covered by the legal warranty against the consequences of faults or hidden defects in
compliance with articles 1641 and subsequent of the French civil code.
2.
All faulty equipment under warranty will be replaced or repaired free of charge at SAGEM SA's option (with the exclusion of
repair of any other damage), once it has been specified that the work required for the application of the warranty will be done in
a workshop and that the return costs (transport and insurance) of the equipment to the address to be indicated to it by the
SAGEM SA after-sales service, whose phone number will appear on the delivery note, will be charged to the customer.
Subject to essential legal provisions, SAGEM SA does not accept any warranty, explicit or implicit, other than the warranty
provided expressly in this chapter, nor shall SAGEM SA accept responsibility for any immaterial and/or indirect damages (such
as loss of orders, loss of profit or any other financial or commercial damage) under the warranty or not.
3.
The acceptance of an item of equipment under warranty demands that a purchase document that is legible and without modification, stating vendor's name and address, date and place of purchase, type of equipment and IMEI, are attached to the
warranty, and that the information on the equipment identification label is legible and that this label or any other seal has not
been tampered with.
The warranty applies in normal conditions of use.
66
251312906 My-X2a English.book Page 67 Mercredi, 9. juillet 2003 1:46 13
Warranties
Prior to sending the equipment for repair, it is the customer's responsibility to backup at his expense the customised data stored
in the equipment (phonebook, settings, wallpapers). A list of backup facilities can be provided by SAGEM SA on request. The
responsibility of SAGEM SA cannot be invoked if damage occurs to customer files, programs or data. The information or
operating elements and the contents of files will not be re-installed in any case in the event of loss.
SAGEM SA may decide, at its option, to repair the equipment with new or reconditioned parts, replace the equipment with new
equipment or, in any dispute, equipment in good working condition. During its work SAGEM SA reserves the facility to make,
where necessary, any technical modifications to the equipment where these modifications do not adversely affect its initial
purpose.
Faulty parts to be replaced during a repair under warranty will become the property of SAGEM SA.
The equipment repair and standstill time during the warranty period may not lead to an extension of the warranty period as stated
in article 1 above, provided no other vital provisions have been agreed.
The application of the warranty is subject to the full payment of the sums due for the equipment when the request for support is
made.
4.
The following are excluded from the warranty:
Breakdowns or malfunctions due to non-compliance with the installation and use instructions, to an external cause of the
equipment (shock, lightning, fire, vandalism, malice, water damage of any type, contact with various liquids or any harmful
agent, unsuitable electric current...), to modifications of the equipment made without the written consent of SAGEM SA, to a
servicing fault, as described in the documentation supplied with the equipment, to lack of supervision or care, to poor
environmental conditions of the equipment (especially temperature and hygrometry, effects of variations in electric voltage,
interference from the mains network or earth) or even due to a repair, a call-out (opening or trying to open the equipment) or to
servicing done by personnel not approved by SAGEM SA.
Damage resulting from inadequate packaging and/or poor packing of the equipment sent back to SAGEM SA.
Normal wear and tear of equipment and accessories.
Communication problems linked with a poor environment, especially:
Problems accessing and/or logging onto the Internet, such as breakdowns of the access network, the failure of the subscriber's
or his correspondent's line, transmission fault (poor geographic coverage by radio transmitters, interference, disturbance, failure or poor quality of phone lines...), a fault inherent to the local network (cabling, file server, user phone) and/or transmission
network fault (interference, disturbance, failure or poor quality of the network...).
Change of parameters of the cellular network made after the equipment was sold.
Supply of new software versions.
Current servicing work: delivery of consumables, installation or replacement of these consumables...
Call-outs for equipment or software modified or added without the written consent of SAGEM SA.
Faults or disruptions resulting from the use of products or accessories not compatible with the equipment.
Items of equipment returned to SAGEM SA without having complied with the return procedure specific to the equipment covered
by this warranty.
The opening or closing of a SIM operator key and call-outs resulting in the non-operation of the equipment resulting from the
opening or closing of SIM operator key done without the agreement of the original operator.
67
251312906 My-X2a English.book Page 68 Mercredi, 9. juillet 2003 1:46 13
Warranties
5.
In the cases of warranty exclusion and of expiry of the warranty period, SAGEM SA shall draw up an estimate to be given to the
customer for acceptance before any call-out. The repair and carriage costs (there and back) given in the accepted estimate will
be charged to the customer.
These provisions are valid unless a special written agreement has been made with the customer, and shall apply in mainland
France. If one of the provisions turns out to infringe a legally essential rule that consumers could have the benefit of under the
national legislation, this provision will not be applied, but all other provisions will remain valid.
68
251312906 My-X2a English.book Page 69 Mercredi, 9. juillet 2003 1:46 13
Troubleshooting
PROBLEM - SITUATION
Impossible to start phone
BATTERY STATE UNKNOWN
message
LOW BATTERY message
SIM MISSING message
PIN INCORRECT Message
SIM BLOCKED
SIM LOCKED
ACTIONS
Hold down the Start key
(3s).
Charge the phone up for 15 minutes before starting it again.
Check the battery change icon scrolls.
Yes: charge correct.
No: disconnect the charger, then reconnect it, check that the battery icon
scrolls. Press the right programmable key "Start".
If the icon continues not to scroll, repeat the disconnect and connect
operation several times. If the battery still does not charge, contact the aftersales service.
When the charge battery icon has stopped flashing, the battery is charged.
The battery has not been recognised by the phone. Check that the battery is
correctly installed in the phone.
This message is displayed when the battery becomes too weak. The phone
switches itself off automatically. Put the phone on charge.
Check SIM card is present and properly installed.
Visually check the SIM card. If the card is damaged, contact the operator's point
of sale to check. If the message continues, contact the after-sales service.
PIN keying error. Caution: after three attempts, the SIM card is locked.
You have entered three incorrect PIN codes.
You will need to enter your PUK code to unblock your SIM Card.
You must enter: **05*PUK*PIN*PIN#
You must enter the PUK code (Personal Unblocking Key) given by your
network provider.
10 errors will permanently block your SIM Card. You must then contact your
network provider to get a new one.
On network providers' request, the handset can only be used with some types of
SIM cards. This message means that the SIM card you are using does not fit
with the phone. Take the SIM card out, and switch the phone back on. If the
message "SIM not present" appears on the screen, you will need to check its
compatibility next to the place where you bought it. If not, please contact your
Customer Services.
69
251312906 My-X2a English.book Page 70 Mercredi, 9. juillet 2003 1:46 13
Troubleshooting
PROBLEM - SITUATION
No call connection
No call reception
Network reception less good
during a call
Impossible to send message
No answer phonebox
Answer phone icon flashing
Backlight does not work
In WAP context:
SERVER NOT ANSWERING
message
Logon to home page impossible
Operator name does not appear on
screen
How do I (un)lock the keypad?
70
ACTIONS
Check the called number. Check that at least one signal strength bar is
present. If the R icon appears without any operator name being displayed,
only emergency calls are possible.
Check that your call credit with your operator has not been used up.
Check that the SIM card used offers the service that you are requesting and
that its validity has not expired.
Check and deactivate the restriction on outgoing calls if necessary.
The network is overloaded. Call again later.
If the poor call connection persists, contact the hotline.
Try to make a call to check that the phone and the network are operational.
Check and deactivate the permanent calls forwarded (permanent calls
forwarded icon displayed). Check and deactivate the restriction on incoming
calls if necessary. If the poor reception persists, contact the hotline.
Avoid holding the phone with your fingers at the top of the rear cover; this
creates an obstacle for the antenna located at this spot.
Check that the SIM card used offers this service. Try to make a call to check
that phone and network are operational.
Check the answer phone number is properly configured. To do this, go to the
"Calls" menu, select "Answer phone number" and check the number.
Otherwise, enter your operator's answer phone centre number.
Check that the SIM card does offer this service.
Programme the call to be forwarded to answer phoneusing the information
provided by the operator.
Call the answer phone to make it disappear.
Go into the Settings menu, select the Energy saving menu and activate
backlight
Switch off and then switch phone back on.
In the WAP menu, Clear the cache.
Go into the Settings menu, select Networks, then Selection. Wait until the
operator appears, select it and accept.
Hit
key, then the right programmable key
(OK).
251312906 My-X2a English.book Page 71 Mercredi, 9. juillet 2003 1:46 13
Troubleshooting
PROBLEM - SITUATION
How do I switch to silent mode?
How do I activate zoom?
How do I remove the envelop that
appears on the screen?
How do I lift the receiver that
appears on the screen?
How do I remove the written
message at the down of the home
page (1 call)
How do I download ring tones?
ACTIONS
Hold
key down unless ring tone sounds, when a short touch is enough.
Can be activated only in SMS and WAP screens; hold down
key.
This envelop means that you have written or answer phone.
To remove it, all you need to do is enter the "Messages" menu to read your
messages. The envelop is then deleted.
In the case of a voice message, contact your answer phonebox and let it
guide you.
This receiver means that you have received answer phone in your message
box. To remove it, call your answer phone.
Press the Stop
key to return to the home page without messages.
Go into the Messages menu, select Compose and enter your message
using the T9 script (predictive input method), which is the default entry
mode.
Logon to one of the following site via your computer:
www.planetsagem.com. This site offers to send ring tones to your phone in
the form of an SMS. You can also logon to your operator's site. Once the
SMS has been received, all you have to do is save it: accept the option
"Save messages", the tune will then be added to your list. In addition, you
can logon to some sites by phone.
Go into the Settings menu, select My objects then delete some objects (too
many).
How do I free up memory to
download my objects (sounds,
images)
How can I increase the efficiency of The most efficient actions are as follows:
my phone?
You can deactivate the backlight (in the menu Settings/Energy saving) or
be carefully where you keep your phone to make sure that the keys can’t be
pressed accidentally because any key press will activate the backlight.
You can deactivate the screensaver or select the activation time to be more
than every 300s (the screensaver uses processing power).
Make sure that you don’t obstruct the antenna with your fingers when using
the phone (see page 20).
71
251312906 My-X2a English.book Page 72 Mercredi, 9. juillet 2003 1:46 13
Index
Accessories
Accessories (menu)
Activating your phone
Adapter
Alarm
Anonymous mode
Answer phone number
p12
p59
p16
p12
p61
p52
p54
Background
Battery
Charging the battery
Installing the battery
Beeps
p44, p45
p19, p20
p17
p43
Calculator
Call barring
Call groups
Calls
Emergency services
First call
Receiving a call
CALLS (menu)
Automatic redial
Call waiting
Calls forwarded
Counters
Display numbers
View last calls
Car kit
Changing cover
Charger
Colours
Confidentiality
Contact
Add contact
Delete contact
Modify contact
See contact
72
p59
p58
p36
p23
p23
p24
p50
p53
p53
p50
p51
p52
p51
p62
p18
p12
p44
p57
p29
p28
p28
p28
Contrast
Converter
Currencies
p48
p60
p60
Data
Date and time
Description
p62
p22, p46
p13
Emergency services
EMS
Energy saving
p23
p34
p48
Fixed dialling
p58
Games
Greeting message
p41
p45
Hands-free mode
Home page
p24
p15
Icon
Input modes
International
IP address
p14, p15
p34
p23
p39
Keypad locking
p13, p55
Languages
Local info
Lock keypad
p47
p54
p55
251312906 My-X2a English.book Page 73 Mercredi, 9. juillet 2003 1:46 13
Index
Memory
Menus
Messages
Compose
Drafts
Inbox
Sending options
p29, p37
p8
p32
p32
p33, p36
p36
p37
Networks
p22, p47
Objects
Operator code
p46
p57
Phone code
Phonebook
Phonebook menu
Using the phonebook
Picture puzzle
PIN number
PIN number 2
Principles of navigation
Programmable keys
PUK code
p56
p27
p29
p27
p41
p16, p21, p55
p56, p58
p14
p13
p21
Receiving messages
Reset settings
Ring tones
p35
p49
p25, p42
Screensavers
Security
Sending options
Services
Settings
Short cuts keys
Shortcut keys
Silent mode
SIM card
SMS
Sounds
Switching off
p45
p58
p37
p63
p46
p49
p13
p26, p43
p16, p17
p34
p42
p24
T9
Technical features
Text
Timer
Troubleshooting
p33
p64
p32, p34
p61
p69
Vibrate
Volume
p42
p25, p42
Wallpapers
WAP
Configuring WAP parameters
Downloading objects
Services menu
WAP logging off
WAP logging on
Warranties
p44
p38, p40
p39
p40
p38
p40
p40
p66
Your phone package
p12
73

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:09:19 09:08:21+02:00
Create Date                     : 2003:07:09 13:25:08Z
Page Count                      : 73
Creation Date                   : 2003:07:09 13:25:08Z
Mod Date                        : 2003:07:09 13:52:52+02:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : g094216
Metadata Date                   : 2003:07:09 13:52:52+02:00
Creator                         : g094216
Title                           : 251312906 My-X2a English.book
Page Mode                       : UseThumbs
Tagged PDF                      : Yes
EXIF Metadata provided by EXIF.tools
FCC ID Filing: M9H95MYX2A

Navigation menu