Sagem Wireless 95MYX52A GSM 850/1800/1900 MHz Mobile Phone User Manual 251669764 myX5 2a lu en

Sagem Wireless GSM 850/1800/1900 MHz Mobile Phone 251669764 myX5 2a lu en

UserManual.wiki >

Sagem Wireless >

95MYX52A User Manual

User Manual

ENGLISH*251669764*SAGEM SAMobile Phones DivisionTel. +33 1 40 70 88 44 - Fax +33 1 40 70 66 40 - www.sagem.comLe Ponant de Paris - 27, rue Leblanc - 75512 PARIS CEDEX 15 - FRANCESAGEM SA - Société anonyme à directoire et conseil de surveillancecapital : 36 405 229 € - 562 082 909 RCS PARIS251669764_myX-5.2_LU-en.qxd 26/07/04 10:45 Page 1

You have just purchased a SAGEM phone, we congratulate you; it isrecommended that you read this handbook carefully in order to use your phoneefficiently and in the best conditions.Your phone can be used internationally in the various networks (GSM 900 MHzand DCS 1800 MHz or PCS 1900 MHz, depending on model) depending on theroaming arrangements with your operator.We remind you that this phone is approved to meet European standards.WARNINGDepending on the model, network configuration and associated subscriptioncards, certain functions may not be available.Ensure that your SIM card is a 3 V SIM type that is compatible with your phone.Inserting an incompatible card will be indicated by a message when your phoneis switched on. Contact your operator.Your phone is identified by its IMEI number. Write this number down, and do notkeep it with your phone, because you may be asked for it in the event of yourphone being stolen, in order to prevent it from being used, even with a differentSIM card. In order to display the IMEI on your phone's screen, type: *#06#.SAGEM is a trademark of SAGEM SA.AT is a registered trademark of Hayes Microcomputer Products Inc.Hayes is a registered trademark of Hayes Microcomputer Products Inc.T9 is protected by one or more of the following US patents: 5,818,437,5,953,541, 5,187,480, 5,945,928, 6,011,554 and other patents are being applied forworldwide.Java and all Java based trademarks and logos are trademarks or registeredtrademarks of Sun Microsystems, Inc. in the U.S. and other countries.The WAP navigator and some message softwares (i-mode) are under licenceOpenwave.The WAP navigator and the softwares included are the exclusive property ofOpenwave. For this reason, it is forbidden to modify, translate, disassemble or evendecompile all or part of these softwares.© 2003 GAMELOFT - All rights reserved - GAMELOFT is a registered trademark ofGAMELOFT S.A. - All rights reserved.Wellphone™ and SmartCom™ are registered trademarks owned by SmartComSARL France.251669764_myX5-2_lu_2e-3ecouv_en.fm Page 1 Mardi, 20. juillet 2004 1:56 13

Weight: 96 gSize: 107 x 46 x 19 mmOriginal battery: Lithium ion 920 mAhBattery life calls/standby: up to 4 h 45 mn/370 h (see page 19 how to increasethe efficiency of your phone)Multimedia objects supported:Audio formats: iMelody, Midi, waveGraphic formats: wbmp, bmp, png, gif, animated gif, jpeg, .3gpSize of memory available for messages:100 SMS300 Kb for MMS (inbox, outbox and drafts together; MMS depending onoption)Size of memory available for the phonenook and the multimedia objects: 4 MBMaximum size of each message:SMS < 160 charactersMMS < 100 Kb for outgoing, 100 Kb for incoming messages (dependson the phone configuration and on the operator reservations)Using temperature: from - 10°C to + 55°C251669764_myX5-2_lu_2e-3ecouv_en.fm Page 2 Mardi, 20. juillet 2004 1:56 13

1 Conformance DocumentSAGEM SA declare under its sole responsibility that the product Triple Band GSM 850/DCS 1800/PCS 1900 Type M2004 conforms to the requirements of the following EEC directives:EEC Directive 1999/5/CESafety EN 60950EMC EN 301 489-1EN 301 489-7This phone is marked CE in accordance with RTTE directive with CEM EN301489-7 norme implementation, suited to the 850/1800/1900 work frequencies. It is not intended to be used in Europe.Low voltage directive 73/23/CEENetwork 3GPP TS 51.010-1 v 5.4.0Requirements GT01 v 4.7.0 TBR 19 Edition 5TBR 20 Edition 3TBR 31 Edition 2TBR 32 Edition 2EN 301 419-1EN 301511FCC Conformance DocumentFCC Part 24Network NAPRD03.ver 2.11.2Health Draft IEEE Std 1528-200x251669764_myX5-2a_lu_en.book Page 1 Mardi, 20. juillet 2004 1:52 13

2Safety Information for Wireless handled phonesUse of your phone is subject to safety rules designed to protect the user and his or her environment.Exposure to Radio Frequency Signals- Your wireless handheld portable phone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out frequency (RF) signals.- In August, 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for handheld wireless phones. Those guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies: ANSI C95.1 (1992)* NCPR Report 86 (1986)<Exposant>*. ICNIRP (1996)<Exposant>*.- Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the ANSI Standard (C95.1).- The design of your phone complies with the FCC guidelines (and those standards).- For body worn operation, this phone has been tested and meets FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.Phone Operation- Normal position: hold the phone as you would any other phone with the upper zone (back of the LCD display) pointed up and over your shoulder.- Tips on efficient operation: for your phone to operate most efficiently: do not touch cover unnecessarily the top part of the phone with your hand. This would cover the integrated antenna and affect call quality and may cause the phone to operate at a higher power level than otherwise needed.*. American National Standards Institute; National Council on Radiation Protection and Measurements; International Commission and Non-Ionizing Radiation Protection.251669764_myX5-2a_lu_en.book Page 2 Mardi, 20. juillet 2004 1:52 13

3Safety Information for Wireless handled phonesDriving- Check the laws and regulations on the use of wireless phones in the areas where you drive. Always obey them. Also, if using your phone while driving while driving please:• Give full attention of driving, driving safely is your first responsibility• Use hands-free operation, if available• Pull off the road and park before making or answering a call if driving conditions so require.Electronic Devices- Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.- Some phone accessories allow to reduce the radiation interferences of the phone. Please contact your distributor.PacemakersThe Health Industry Manufacturers Association recommends that a minimum separation of six (6”) inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research.Persons with pacemakers:- Should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON- Should not carry the phone in the breast pocket- Should use the ear opposite to the pacemaker to minimize the potential for interference- If you have any reason to suspect that interference is taking place, turn your phone OFF immediately.Hearing AidsSome digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider.251669764_myX5-2a_lu_en.book Page 3 Mardi, 20. juillet 2004 1:52 13

4Safety Information for Wireless handled phonesOther Medical DevicesIf you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so.Hospitals or health care facilities may be using equipment that could be sensitive to sensitive external RF energy.VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.Posted FacilitiesTurn your phone OFF in any facility where posted notices so require.AircraftFCC regulations prohibit using your phone while in the air. Switch OFF your phone before boarding an aircraft.Blasting AreasTo avoid any interfering with blasting operations, turn your phone OFF when in a “blasting area” or in areas posted: “Turn off two-way radio”. Obey all signs and instructions.Potentially Explosive Atmospheres- Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.- Areas with a potentially explosive atmosphere are often but not always clearly marked. They include fueling areas such as gasoline stations; below deck on boats, fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust, or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.251669764_myX5-2a_lu_en.book Page 4 Mardi, 20. juillet 2004 1:52 13

5Safety Information for Wireless handled phonesFor Vehicles equipped with Air BagAn air bag inflates with great force. DO NOT place objects, including both installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.Electrical Safety- Only us the appropriate chargers recommended in the manufacturer’s catalog. Using another charger may prove dangerous and could invalidate the warranty of your phone.- The main power socket should be easily accessible.- Make sure that the main voltage corresponds to the level marked on the charger identification plate.General Precautions- Do not try to open your phone and repair it yourself. The manufacturer cannot be held liable for any resulting damage.- Any work done by an unqualified and unauthorized person will invalidate your warranty.- Do not use your phone in humid places (bathroom, swimming pool, etc.). Protect it from splashing water and other liquids.- Do not expose your phone to extreme temperatures.- Keep your phone out of reach of small children. Do not allow them to play with it, it is not a toy.- Only use your phone with original accessories. Failure to comply with these rules will invalidate your warranty.- Remember to disconnect the charger before removing the battery.- The physical and chemical processes used in rechargeable batteries mean that temperature limits must be followed during rapid charging. Your phone automatically protects the batteries from extreme temperatures.- If the phone is disconnected from the battery for an extended period of time, it will lose the time and the recorded voice messages.Back OptionsWARNING- The manufacturer cannot be held liable for any failure to comply with the above recommendations or for any misuse.- The software program developed by SAGEM SA remains the exclusive property of SAGEM SA. It is therefore highly prohibited to modify, translate, decompile or disassemble this software program or any part thereof.- SAGEM SA may not be held responsible for the contents of messages, software or objects downloaded and/or for any direct or indirect consequential damage to the phone itself.251669764_myX5-2a_lu_en.book Page 5 Mardi, 20. juillet 2004 1:52 13

6Safety Information for Wireless handled phonesEmergency CallsIMPORTANT- This phone, like any PCS phone, operates using radio signals, PCS and landline networks, and user-programmed functions. As a consequence a connection in all conditions cannot be guaranteed. Therefore you should never rely solely upon any PCS phone for essential communications (e.g. medical emergencies).- To make or receive any calls, this phone must be switched on and in service area with adequate PCS signal strength. Emergency calls may not be possible on all PCS networks or when certain network services and/or phone features are in use. Check with local Service Providers.- When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your PCS phone may be the only means of communication at the scene of an accident - do not terminate the call until given permission to do so.- If certain features are in use (such as Keyguard), you may first need to turn those features off before you can make an emergency call. Consult this manual and your local PCS Service Provider.Emergency Calling- If the phone is not on, press .- Key in emergency number for your present location (e.g. 911 or other official emergency number).-Press .- If you dial 911 during a call, the phone terminates the current call and attempts to make a call to the emergency number 911.FCC/INDUSTRY CANADA NOTICEYour phone may cause TV or radio interference (e.g. when using phone in close proximity of receiving equipment). The FCC/INDUSTRY Canada can require you to stop using your phone if such interference cannot be eliminated. If you need assistance, contact your local dealer.This device complies with parts 15 and 68 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interferences.251669764_myX5-2a_lu_en.book Page 6 Mardi, 20. juillet 2004 1:52 13

7MenusGamesWAPApplicationsToDoCalculatorConverterAlarmTimerMessagesComposeInboxOutboxSentboxDraftsOptionsMemoryLocal info.Call Voice MailMailing ListsCameraMultimediaMy PicturesMy SoundsMemoryHelpOrganizerSee monthSee weekSee todaySee dateCalendar menuHelpPhonebookContacts menuSettingsSoundsDisplayCameraLanguagesCallsSecurityNetworksShort cutsDate/TimeConnectivityHelp251669764_myX5-2a_lu_en.book Page 7 Mardi, 20. juillet 2004 1:52 13

8ContentsPage 7 MenusPage 12 Your phone package - AccessoriesPage 13 DescriptionProgrammable keys and Short cut keysNecklace attachmentPage 15 Navigation principlesPage 16 Initial screenPage 17 Activating your phoneInformation on the SIM cardInstalling the SIM card and the batteryGetting startedPage 19 Using your phoneFreeing the antennaIncrease the efficiency of your phoneHands-free modeCharging the batteryPage 21 PhonebookUsing the phonebookStoring a new contactContacts menuOptions from a contact savedSending a vCardReceiving a vCardPage 26 MessagesCompose SMSCompose MMSReceiving messagesInboxOutboxSentboxDrafts251669764_myX5-2a_lu_en.book Page 8 Mardi, 20. juillet 2004 1:52 13

9ContentsSending optionsMemoryLocal informationCalling voicemailMailing listPage 37 CameraTake and send a photoPage 39 MultimediaMy PicturesEdit a photoMy SoundsMemoryPage 42 WAPThe WAP MenuConfiguring WAP parametersWAP Logging onDownloading objectsWAP Logging offGPRSPage 46 GamesPage 47 ApplicationsServicesToDoToDo menuToDo actions menuSending a vCalReceiving a vCalExchange of data with a PCCalculatorConverterAlarmTimer251669764_myX5-2a_lu_en.book Page 9 Mardi, 20. juillet 2004 1:52 13

10ContentsPage 54 OrganizerCalendar menuSending a vCalReceiving a vCalPage 56 SettingsSoundsVolume and ring toneVibrateSilent modeBeepsRecorderDisplaySkinsWallpaperScreensaverOperator logoContrastEnergy savingCameraLanguagesCallsCall forwardView last callsCountersDisplay numberCall waitingAutomatic redialBlacklistVoicemailALSSecurityKeypad lockingPIN numberPIN2 number251669764_myX5-2a_lu_en.book Page 10 Mardi, 20. juillet 2004 1:52 13

11ContentsPhone codeConfidentialityOperatorCall barringFixed diallingCostNetworksShort cutsDate / TimeSet Date/TimeAutomatic updateDisplayTime zoneSummer timeConnectivityIrDASerial SpeedCar kitWAP settingsHelpPage 77 Care and safety informationSafetySAR - FCC CERTIFICATIONAdvice for limiting exposure to radiofrequency (RF) fieldsPage 80 WarrantyPage 83 End User Licence Agreement (EULA), for the softwarePage 87 Java™Page 91 TroubleshootingPage 95 Index251669764_myX5-2a_lu_en.book Page 11 Mardi, 20. juillet 2004 1:52 13

12Your phone packageWhen you open the box, check that all items are present:1 - Phone2 - Charger3 - Battery4 - User guide5 - CD (depending on model)AccessoriesYou can also find (as an option) or order the following accessories:Pedestrian kit (*)Additional batteryAdditional charger (*)USB cable (with associated drivers) and serial cable to connect your phone to a PCCigar lighter charger (*)Colored covers(*) These accessories are identical to the ones provided for the earlier 3000 series and MYX-X.21345251669764_myX5-2a_lu_en.book Page 12 Mardi, 20. juillet 2004 1:52 13

13DescriptionProgrammable keys and Short cut keysHold down: Switch on/offIn a call context: Reject a call - hang upIn menus: Return to initial screenLong press: Activate/Deactivate hands-free modeIn call context: Call - receiving a callRight programmable key: (Function available depending on model)In initial screen: Access to certain functions (shortcuts)In menus: Access to the selection shown on screen in the tab (*)(*) In this manual, when a function is chosen by pressing on this key, square brackets are used (e.g.: [Save]).Left programmable key: (Function available depending on model)In initial screen: Access to certain functions (shortcuts)In menus: Access to the selection shown on screen in the tab (*)SPrevious choice/increase value/upDuring call: Increase volumeTNext choice/reduce value/downDuring call: Reduce volumeWUp input field/move leftXDown input field/move rightOKIn initial screen: access to main menu.In the menus: context-sensitive access to different functions.During a call: take a call.Press briefly and [OK] key: activate or deactivate keypad lockingIn call reception mode: Short press stops ring toneIn ring tone setting mode: Activate / deactivate ring toneWhen composing a message:Short press: switches from one input mode to another (T9, ABC, 123)Long press: upper case/lower caseHold down:In initial screen: Silent modeZoom mode (see Messages and WAP menus)Microphone251669764_myX5-2a_lu_en.book Page 13 Mardi, 20. juillet 2004 1:52 13

14DescriptionNecklace attachmentInsert the necklace into the notch located in the right bottom of the inside part of the phone.IrDACamera Mirror251669764_myX5-2a_lu_en.book Page 14 Mardi, 20. juillet 2004 1:52 13

15Navigation principlesThese basic principles bring a great intuitiveness to your phone.Validate by pressing the key or the OK key.Cancel by pressing the key.The thumbnails at the bottom of the screen refer to the keys.In the menus, a title bar reminds you of the previous level.The TS navigation keys are used to navigate from one menu to another within the same menu structure.From the home page, pressing the TSW or X keys displays the icons of the main menus.The key is used to go from a menu to a sub-menu.The key is used to go from a sub-menu to a menu.The key (press briefly) is used to go back to the initial screen (current function is abandoned).In some menus there is a Help menu ( icon) which informs you on the various functions of the sub-menus.251669764_myX5-2a_lu_en.book Page 15 Mardi, 20. juillet 2004 1:52 13

16Initial screenThe initial screen contains the following information:1 - The title bar icons:BatteryCalls forwarded Call (establishing the call)Call (hands free)Message (reception of a message, message memory full)FAX communicationDATA communicationSilent modeMessage in answering machineWAP (@) communicationGPRSHome zoneRoamingKeypad lockingProtected WAP logonProtected WAP logon icon with certificateSignal strength level (5 bars).2 - Date and time, in digital or analog mode3 - Network provider4 - Thumbnail centred on bottom line:the main « Menu » thumbnail shows that the menu can be accessed via theTSW or X keys. The following information may also be displayed:« 1 message received »; or « 1 call ».They can be deleted by pressing key briefly.Network provider251669764_myX5-2a_lu_en.book Page 16 Mardi, 20. juillet 2004 1:52 13

17Activating your phoneTo use your phone, you need a card called SIM card. It contains personal information that you can modify:Secret codes (PIN(s): Personal Identification Numbers), these codes allow you to protect access to your SIM card and phone.Phonebook,Messages,How special services work.Your phone is compatible with the SIM 3V cards.Information on the SIM cardWARNINGThis card must be handled and stored with care in order not to be damaged. If you should lose your SIM card, contact your network provider or your SMC (Services Marketing Company) immediately.Please keep your SIM card out of reach of young children.251669764_myX5-2a_lu_en.book Page 17 Mardi, 20. juillet 2004 1:52 13

18Activating your phoneThe SIM card is inserted under the phone's battery. Ensure that the phone is switched off and the charger disconnected.Turn the phone back and push lock button upwards.Remove the back cover by lifting bottom end first.Take out battery if already installed.Slide the SIM card, with cut corner as shown on the phone, into the card holder with fold face down.Place the battery by positioning first the top of it, as shown on the battery.Replace the back cover, clicking in first the upper part then the lower and pushing the back catch downwards into the lock position.When you switch on your phone for the first time, you must configure it with various settings that will remain by default until you choose to modify them (depending on model).After entering your PIN code and the date and time, make your choice for the following settings: time zone, daylight savings, skin, wallpaper, screensaver, ring tone, volume, vibrate and voicemail number.If there are contacts saved in your SIM card, you are invited, if you wish, to copy them in the phone contacts memory.Installing the SIM card and the batteryGetting started213456123456251669764_myX5-2a_lu_en.book Page 18 Mardi, 20. juillet 2004 1:52 13

19Using your phoneThe antenna is integrated in your phone, under the back cover at the top.Avoid putting your fingers on this area when the phone is switched ON.If your fingers obstruct the antenna, the phone may have to operate with a higher power level than usual; decreasing its efficiency quickly. It could also affect the quality of your communications.Non ionising radiationTo obtain maximum satisfaction from your phone, use it in a vertical position. Your personal safety can only be improved by doing so.- Don't press the keys when not necessary: each keypress activates the backlight, and uses much power.- Don't obstruct the antenna with your fingers.During a call, press twice the key or the OKkey to switch into hands-free mode.WARNING: do not use the phone in hands-free mode near to your ear, or you may suffer hearing loss.Freeing the antennaIncrease the efficiency of your phoneHands-free mode251669764_myX5-2a_lu_en.book Page 19 Mardi, 20. juillet 2004 1:52 13

20Using your phoneYour phone is powered by a rechargeable battery. A new battery must be charged for 4 hours at least before being used for the first time. It reaches its optimum capacity after a few cycles of use. When your battery has been discharged, the phone displays the state (empty battery icon flashes). In this case recharge your battery for at least 15 minutes before making any calls in order not to be cut off in the middle of a call.To recharge the battery:Connect the charger to a socket.Plug the end of the cable into the bottom connector of the phone. The phone is then charging up. The battery icon is scrolling up and down to indicate that it is charging. When the battery is fully charged, the charging stops on its own. Disconnect the cable.When charging, the battery may warm up, this phenomenon is normal.Charging the batteryWARNINGThere is danger of explosion if the battery is placed in an incorrectly way or if it is exposed to fire.Do not short circuit it.The battery does not have any part that you can change.Do not try to open the battery casing.Use only the appropriate chargers and batteries as shown in the phone manufacturer's catalogue.The use of other types of chargers or batteries may be dangerous or invalidate the warranty.Used batteries must be disposed of in the appropriate places. We advise you to take the battery out if you plan not to use the phone for extended periods.You are strongly advised not to connect your phone to the charger if it doesn’t contain a battery.The charger is a safety step-down transformer, it is forbidden to modify, alter or replace it by another component (power supply plug, etc).251669764_myX5-2a_lu_en.book Page 20 Mardi, 20. juillet 2004 1:52 13

21PhonebookThe phonebook allows you to store numbers that you call regularly. These numbers can be stored in the SIM card or in the phone.To store a contact in the phone memory, the following fields can be filled: last name, first name, numbers, email, URL, address, company, comments, ringtone, photo.The fields coloured with red are mandatory.To store a contact in the SIM card, only the last name and number fields must be filled.The storage capacity will depend on the SIM card. Please contact your network provider to get that information.In the initial screen, press the Tkey to access the main menus. The first menu proposed is Phonebook.Press the OKkey to enter the menu. The list of your correspondents appears. By default, the cursor is positioned on the first name in alphabetical order. If you are using your phone and SIM card for the first time, the phonebook list will be empty, only the Contacts menu function will be available.Different icons inform you of the position in the phonebook where the contact is stored:contact stored in the SIM cardcontact stored in the phoneif the Fixed Dialling option is activated, only those contacts may be called. See PIN2 number and Fixed dialling in SecurityMenu for more details about this activation.Using the phonebook251669764_myX5-2a_lu_en.book Page 21 Mardi, 20. juillet 2004 1:52 13

22PhonebookDepending on the location where you want to store a new contact, select Add phone contact to store it in the phone memory or Add SIM contact to store it in the SIM card memory or in the Fixed Dialling (Fixed Dialling is available depending on PIN number 2 options of your SIM card).Adding a contact in the SIM card memory- Select the Contacts menu and press the OK key.- Select Add SIM contact and press the OK key.- Select SIM card or Fixed directory and press the OK key.- Enter the last name and press the OK key.- Enter the number and press the OK key.- Press [Save] to store it.Adding a contact in the phone memory- Select the Contacts menu and press the OK key.- Select Add phone contact and press the OK key.- Enter the last name and press the OK key.- Enter the number and press the OK key.- Fill in other fields if you want.- Press [Save] to store it.Storing a new contact251669764_myX5-2a_lu_en.book Page 22 Mardi, 20. juillet 2004 1:52 13

23PhonebookMailing listsYou can create a mailing list with contacts to whom you want to send SMS or MMS. - Select the Contacts menu and press the OK key.- Select Mailing Lists and press the OK key. The phone asks you to confirm the creation of a new list.- Select the list type (SMS or MMS) and press the OK key.- Enter a name and press the OK key.- Then, on a list press [Options]. Select Add contact each time you want to add a contact in the list.MemorySelect Memory and validate. Select SIM or Phone and validate.Phone: the screen displays the amount of memory used. The memory capacity is shared between the phonebook and various other features. If you lack memory, check if you can free some space from another feature.SIM: available memory only for contacts.My numbersYou can create the entries corresponding to your own numbers in order to consult them when necessary.Select My numbers and validate. Enter the different details and validate.Contacts menu251669764_myX5-2a_lu_en.book Page 23 Mardi, 20. juillet 2004 1:52 13

24PhonebookDisplaying a contactSelect a contact from the list using the TSkeys and press the OKkey. The name and the number are displayed.Note: By directly pressing one character, the phone will display the first contact saved in the phonebook, starting with it.To display the different options, select a contact from the list using the TSkeys and press [Options].Modify contactModify what you want and validate then select Save once the modifications completed.Copy to SIM / Copy to phoneThis allows you to copy your phonebook entries from one memory to the other. Only the name and the first phone number will be copied.DeleteValidate deletion of entry.Send messageTo send a message (SMS or MMS) (see chapter Messages).Send byTo send a message (SMS, MMS or by IrDA) (see chapter Messages).My numbers(See page 23).Memory(See page 23).Options from a contact saved251669764_myX5-2a_lu_en.book Page 24 Mardi, 20. juillet 2004 1:52 13

25PhonebookMailing lists(See page 23).Calling a contactSeveral ways:- Select a contact. Press the key to start the call.- Select a contact, press the OK key, his number is displayed, press [Call] to start the call.- Direct call from the initial screen: type the number with which the contact was saved then (example : 21 ) or the number then , the number is displayed, confirm.vCards can be sent to another phone supporting vCard.On a contact in the phonebook, please select the Send by option menu item (SMS, MMS or IrDA).If the vCard is sent successfully, an information message is displayed.vCards can be sent as an attachment to an SMS or MMS message. See Compose MMS on page 29.When a vCard is received enclosed to an SMS or MMS message, the message « You have received 1 message » is displayed. Open the MMS from the inbox. Press [Options] and select Extract;select the vCard among the list of objects attached to this MMS, and add this contact to the phonebook by pressing the OKkey. A message is displayed to confirm the action.Sending a vCardIt is possible to send a vCard from each contact stored in the phonebook.Receiving a vCard251669764_myX5-2a_lu_en.book Page 25 Mardi, 20. juillet 2004 1:52 13

26MessagesFrom this menu, you are able to send SMS and MMS. MMS is a Multimedia Message Service, which allows you to enclose audio files, images and others rich contents to your messages; these messages can even be composed of several slides. MMS are differently invoiced than SMS are. Please contact your network provider to get more information on their cost. This menu has been compiled in collaboration with magic4™.On the Messages menu, please select the Compose menu and validate. Choose the SMS option.The language used is the one selected on the display of the phone (if the language selected is not compatible with the Easy Message T9™, the English language will be automatically selected).When typing a text, a counter showing the number of characters deducted is displayed at the top of the screen (depending on model). This counter is not displayed if an icon or sound is inserted into the SMS.When the text has been entered, [Options] is used to access the functions offered:Save is used to save a draft in memorySend is used to send the message by entering the correspondent's number or selecting it in the phonebookT9 options (see page 27)ABC mode (see page 28)123 mode (see page 28)Quit is used to delete all text entered and quitActivate/deactivate zoom is used to modify size of charactersFormatting is used to enrich a textInsert to insert an image or sound into your message (see page 29).Compose SMS251669764_myX5-2a_lu_en.book Page 26 Mardi, 20. juillet 2004 1:52 13

27MessagesThe Easy Message T9™ mode helps you to easily write your short messages.Using T9 ModePress once the key corresponding to the letter chosen and compose the word by continuing to press the keys corresponding to the various letters without paying attention to the display: the word is highlighted.If you agree on the word proposed on the screen, press the 0key to validate it (the 0key inserts a space), and go on writing the next word.However, the same sequence of keys pressed can correspond to several words, existing on the dictionary. If the word that appears is not the word you expected, press the TSkeys to scroll through the words corresponding to this key sequence.Once you agree on the word proposed on the screen, press the 0key to validate it (the 0key inserts a space), and go on writing the next word.If the word you are expected is not proposed, please add characters until you get the message Add the word? Press Yes and validate if the word displayed suits you or modify this word before adding it in the dictionary.251669764_myX5-2a_lu_en.book Page 27 Mardi, 20. juillet 2004 1:52 13

28MessagesIn the input screen, the key is used to access other input options.Input modesEditor mode: The ABC mode is used to write words that do not exist in the dictionary. To get a particular character, please press the corresponding key several times: the characters will scroll down on your screen. Mode 123 is used to add numbers. Insert mode is used to add symbols, animations, call group icons and tunes. Images and sounds can be of two types: pre-defined or customized. Pre-defined images and sounds are smaller, especially suited to exchanging messages.Upper caseA short press of the key will display the next letter in upper case.Two short presses on the key allow you to switch to upper case editing mode for the whole message. Two short presses again, switches back to lower case.Punctuation charactersPunctuation characters are obtained thanks to key 1 (except in 123mode), or with the help of Insert mode (fast access by briefly pressing the key).Accented charactersAccented characters are generated automatically in T9 mode.In ABC mode accented characters are available by pressing the key supporting the non-accented character in succession.When composing a message:The navigation keys assume the following functions:-W key: Last word-X key: Next word-S key: Previous line-T key: Next line- key: Deletes last letter- key: Message options- key (long press): Zoom mode (changes size of characters)- key (short press): Access to symbol table251669764_myX5-2a_lu_en.book Page 28 Mardi, 20. juillet 2004 1:52 13

29MessagesOn the Messages menu, please choose the Compose menu and validate. Select the MMS option.When the text has been entered, [Options] is used to access the functions offered:Insert to insert multimedia objects such as images, animations and sounds into your message.T9 options (see page 27)ABC mode (see page 28)123 mode (see page 28)Slide to compose a slideshow of the multimedia objects.Preview to see a presentation of the multimedia objects.Cancel is used to delete all text entered and quitSaving the messageSelect Save. It is saved in the Drafts menu.Sending the message- Once the text entered, press the OK key or press [Options] and select Send.- Enter the receiver’s number (or take it in your phonebook pressing [Contacts]) and press the OK key. You can enter an e-mail address.Note: It is possible that the voice message format (.amr) is not supported by some PC. See your PC provider.Warning: some message sendings may fail if the message content is too big.Compose MMS251669764_myX5-2a_lu_en.book Page 29 Mardi, 20. juillet 2004 1:52 13

30MessagesPressing [Options] before sending the message gives access to different options:-Send options: can be used to indicate the period of validity, activate/deactivate a request delivery report, a priority, a delivery time or a sender visibility.-Add mailing list: this option allows you to select a mailing list to which the message is sent (see chapter Phonebook).-Add recipient: this option allows you to add another recipient.-ABC/123: this option allows you to modify the text before sending the message.-Add subject: this option allows you to add a subject to the message.251669764_myX5-2a_lu_en.book Page 30 Mardi, 20. juillet 2004 1:52 13

31MessagesWhen you receive a message, the phone plays the ring tone that you selected, and the message icon comes on the screen of your phone.If you do not read the messages, this icon remains displayed on the screen. When it flashes, the memory is full.Receiving icons, backgrounds or tunes can take several seconds. An icon is blinking when the download of your message is in progress.Note that you have two different possibilities for receiving MMS: automatically or manually; if « manual mode » is activated, then you will receive only a notification in your Inbox, meaning that a MMS is available on the MMS Server; select Retrieve in the options when you want to retrieve the MMS from the server.For more details about automatic and retrieval modes, see « Sending options » on page 34.Please contact your network provider to get more information on icons, backgrounds or tunes downloading.Receiving messages251669764_myX5-2a_lu_en.book Page 31 Mardi, 20. juillet 2004 1:52 13

32MessagesReceived messages are stored in the SIM card or in the phone until you choose to delete them.On the Messages menu, please choose the Inbox menu and [Select].Each message shows the presence of any attachments, the time and date the message was received and its size.Messages are listed in chronological order, the latest one being displayed first.The quantity of Not Read and Not Retrieved messages is shown. Not Retrieved and Not Read messages are shown in bold. Select a message and press the OKkey. Choose one of the options given.Enclosures (pictures or sounds), which you receive, can be extracted in order to be used later on (stored…). You can consult them in the corresponding menus (WAP bookmarks inWAP, ring tones in Sounds, wallpapers in Display).This menu displays the messages that failed to send. You can therefore try to send them again.InboxOutbox251669764_myX5-2a_lu_en.book Page 32 Mardi, 20. juillet 2004 1:52 13

33MessagesThe Sentbox menu is used to store all your sent messages if youactivated the option Store sent messages in the Options menu (see page 34).Too many messages saved will quickly fill up the available memory and no further messages will be received.For each message, its characteristics (shown with an icon) and the time (or date) of sending are displayed on the screen.Select a message and press the OKkey.Choose one of the options given: Read, Modify, Forward, Delete, Delete all.On the Messages menu, please choose the Drafts menu and press the OKkey.Select a message and press [Options]. The options are: Delete, Read, Modify, Details.If you select a message and press the OK key, you can modify it.If you want to send it, select Modify then press [Options] and select Send.SentboxDraftsWhen you store a composed message, it is stored among the drafts.251669764_myX5-2a_lu_en.book Page 33 Mardi, 20. juillet 2004 1:52 13

34MessagesOn the Messages menu, please choose Options and [Select].Choose one of the options given: SMS or MMS.The SMS sending options are: message centre number, store sent message, acknowledgment, reply given, period of validity (during that period, the network provider will try to send the message), message format.The MMS options are: -Store sent messages: (it is highly recommended that you keep this function deactivated, in order to avoid a full memory),-Retrieval mode: if you are in a poor coverage area, it may be more convenient to choose the manual retrieval mode which gives you the retrieve later option.-Priority: selection of a priority to send a message.-Request delivery report: request of a delivery report when sending a message.-Period of vailidtyAdvanced settings:-Send delivery report: sending a delivery report when receiving a message.-MMS ignore: if you want to deactivate the reception of any MMS in your phone.-MMS server: to select another MMS provider, or set the parameters of a new MMS provider.-Sender visibility: you choose to display or not your phone number on the receiver’s phone screen, with that message.-Maximum sizeSending optionsSeveral sending options are offered.251669764_myX5-2a_lu_en.book Page 34 Mardi, 20. juillet 2004 1:52 13

35MessagesOn the Messages menu, please select the Memory option and [Select].Choose one of the options given: SMS or MMS.The SMS screen displays the memory available either on the SIM card or on the phone.The MMS screen displays how much memory is used in Kbytes.You can choose whether you want to receive this information or not (please contact your network provider).On the Messages menu, please select the Local info. menu and [Select].MemoryYou may know the memory available for saving messages.Local informationThis menu is used to activate reception of local information broadcast by the network.251669764_myX5-2a_lu_en.book Page 35 Mardi, 20. juillet 2004 1:52 13

36MessagesOn the Messages menu, please select the Call Voice Mail option and [Select].Note: if your voicemail number has not been entered yet, you must enter it in the menu Settings/Calls/Voicemail.This menu displays the mailing lists created in the phonebook.To display the different options, press [Options].-Properties: allows you to see the type of mailing list and the number of contacts.-Delete: allows you to delete the mailing list.-Send message: allows you to compose and send a message to the contacts of the mailing list.-Add mailing list: allows you to create a new mailing list.-Modify name: allows you to modify the mailing list name.-Add contact: allows you to add a contact to the mailing list.Calling voicemailThis function allows you to call your voicemail.Mailing list251669764_myX5-2a_lu_en.book Page 36 Mardi, 20. juillet 2004 1:52 13

37CameraThis menu allows you to take photos and use them for different purposes. For instance, you can send them to another phone or an Internet address, store them, use them as wallpapers or screen savers…Before taking a picture, some features need to be set. See the Settings/Camera menu.From the initial screen, press Tor S to display the main menu and select the Camera menu.The camera is now on. Look into your phone display and position your subject. Move your phone to position your photo.Before taking a picture, there are various adjustment settings:- To activate one of the three available zoom levels, use the TS keys.- You can set the photo layout (landscape or portrait) using the X key.- You can set the luminosity using the W key: : in case of neon or halogen lighting, : outdoor, : low luminosity. - To take a picture with a 5, 10 or 15 second time delay, press [Timer].Taking and/or sending a picture- Press OK, the photo is taken and stays on the phone display.Warning: if you press [Back], you will go back to the previous screen and lose the photo you have just taken.- Press OK if you want to send the photo immediately.- Press [Save] to save your photo and display the different options (see next page).If there is not enough memory to save the photo, a warning message appears, prompting you to confirm whether you want to go on.Take and send a photo251669764_myX5-2a_lu_en.book Page 37 Mardi, 20. juillet 2004 1:52 13

38CameraOnce taken, the photo appears on the phone display. The name is made up with a number.Note: using the camera during a call may disturb the call quality.The options are:-New...: allows you to take a new photo,-Rename: allows you to modify the name of a photo,-Send by: allows you to send the photo by MMS or IrDA (see the Message menu).-Editor: various options to modify a photo (see chapter Multimedia,part Edit a photo).-PlanetSagem: photos that have been taken can be saved onto a PC through a cable or IrDA using the MPAS (My Pictures And Sounds) utility which can be downloaded from www.planetsagem.com.-Add to contact: allows you to assign a picture to a contact saved in the phonebook.Select one of the options with the TSkeys and validate.251669764_myX5-2a_lu_en.book Page 38 Mardi, 20. juillet 2004 1:52 13

39MultimediaThis menu gives you easy access to your favourite photos, pictures and sounds.On the Multimedia menu, please select the My Pictures menu and [Select].The pictures stored are displayed on the screen. Please, use the TSkeys to select one of them.Once you have selected a picture, press [Options].Select one of the options in the list with the TSkeys and validate.-Use as: allows you to use the picture as a wallpaper or screen saver.-Delete: allows you to delete a picture.-Delete all: allows you to delete all pictures.-Rename: allows you to rename a picture.-Send by: makes it possible to transmit a picture (NB: you may not send any copyrighted picture).You can import or export pictures to or from a computer using My Pictures And Sounds (MPAS), available from www.planetsagem.com.Properties: properties of the picture selected.New photo: allows you to take a new picture.The Pictures menu allows you to delete all the pictures or to take a new photo.My PicturesThis menu gives you access to your pictures.251669764_myX5-2a_lu_en.book Page 39 Mardi, 20. juillet 2004 1:52 13

40MultimediaEdit a photoOn the Multimedia menu, please select the My Pictures menu and [Select]. Select a photo and the Editor option, the Editor menu appears.Select one of the edit functions with the TSkeys and validate:-Sepia: allows you to change colors into sepia,-Zoom: allows you to magnify certain parts of your photo,-Adjustment: allows you to improve contrast,-Emboss: allows you to modify a photo with an embossed grey tint,-Negative: allows you to change a photo into negative,-Grey Scale: allows you to change color into black and white,-Add mark: allows you to add special characters or drawings to your photo,-Add frame: allows you to surround your photo with a frame,-Contrast: allows you to increase or decrease the contrast of your photo,-Sharpen: allows you to sharpen a photo,-Blur: allows you to add blur to a photo.251669764_myX5-2a_lu_en.book Page 40 Mardi, 20. juillet 2004 1:52 13

41MultimediaTo access your sounds, use the same procedure as for your pictures (see the My Picturesmenu).You can import or export sounds to or from a computer using My Pictures And Sounds (MPAS), available from www.planetsagem.com.On the Multimedia menu, please select the Memory menu and [Select].Use the TSkeys to select the different features using memory. You can see the memory capacity used by each individual feature.My SoundsThis menu gives you access to your sounds.MemoryThis menu indicates the memory size used by the different features of your phone.251669764_myX5-2a_lu_en.book Page 41 Mardi, 20. juillet 2004 1:52 13

42WAPWAP (Wireless Application Protocol): a protocol that translates the Internet language into WML and HTML languages that can be read by a phone. The WAP function allows you to log onto certain Internet sites. You can log onto sites that allow you to download ringtones, icons, animated screensavers, JavaTM applications to your phone.The Servicesmenu, a dropdown menu, can be accessed at all times when navigating through WAP pages pressing the key.It contains the following sub menus:Welcome: logs onto the home page, (carries the name of your access provider)Bookmarks: is used to save in a phonebook the names and addresses of Internet sites in order to make the access easy.You can receive bookmarks from messages and add them to this list (see chapter on SMS).You can also send messages by SMS: select a bookmark, press [Options], then select Send by message.Go to URL: this menu allows you to input an Internet address directly.Inbox: this menu allows you to check the messages sent by the Internet site.Save items: is used to save a WAP site items.Snapshots: takes a snapshot of the currently displayed page.History: backward and forward navigation of the pages displayed are kept in memory.Reload: refreshes the current page.Reset cache: clears the stored information on previous connections.The WAP MenuThe WAP navigator is underlicence:The WAP navigator and the softwares included are the exclusive property of Openwave. For this reason, it is forbidden to modify, translate, disassemble oreven decompile all or part ofthese softwares.You can activate the magnifying glass to increase the size of the characters by holding down the key.251669764_myX5-2a_lu_en.book Page 42 Mardi, 20. juillet 2004 1:52 13

44WAPPreferred connections: GSM if not GPRS (by default): the logon to WAP services uses the GPRS as a priority. However, in the event of unavailability of the GPRS network, the GSM network is used to establish the link. GPRS: the logon to WAP services uses the GPRS network exclusively. GSM: the logon to WAP services uses the GSM network exclusively.GSM parameters:- Login- Password- IP address of WAP gateway- Port type (secure or insecure)- Dial-up number- Mode (digital, analog or automatic)In automatic mode access can be gained to the operator's network by a digital link and an analog link to a different network (in roaming).GPRS parameters:- Login- Password- IP address of WAP gateway- Port type (secure or insecure)- APN: if no APN has been defined, press [Options] then the APN menu. Select or add an APN.Once all the settings have been entered, you can activate the chosen access provider. Select him from the list. Validate your choice.Linger timer is used to choose the time after which the call is automatically disconnected if you have forgotten to log off from a service.251669764_myX5-2a_lu_en.book Page 44 Mardi, 20. juillet 2004 1:52 13

45WAPUsing the Welcome menu, you can log onto your access provider's WAP site by pressing the key.If you are logging onto the GSM or GPRS network, the @ symbol flashes, the metering of the cost of the call starts as soon as it stops flashing.Some WAP sites allow you to download ringtones, icons, animated screensavers, games or JAVATM applications. Once downloaded, they are stored in your phone's memory. You can then save them in your phone (same operation as used for downloading using messages).To log off, press the key. The logoff happens automatically after a few seconds of inactivity if you forget to log off. This period is defined by the linger time setting.A flashing icon indicates that the phone is logging onto a GPRS network. A non-flashing icon indicates that the GPRS network is available; if the icon is dark, it indicates that the phone is logged onto the GPRS network: see page 43 for the attachment options.This icon is not displayed if the GPRS network is not available or if the SIM card inserted in your phone does not include the GPRS service. It may also disappear when accessing WAP services if the connection uses the GSM network instead of the GPRS network.WAP Logging onDownloading objectsWAP Logging offGPRSThe connection to a WAP service on the GPRS network is not cut ifan incoming call is received. You can answer the call.251669764_myX5-2a_lu_en.book Page 45 Mardi, 20. juillet 2004 1:52 13

46GamesThe games being designed by Java™, many compatible games can be downloaded in your phone.The More games function allows you to download games connecting on a remote server.Depending on the operator, the connection URL may not be present. To add a new URL, go to Settings/Connection/Menu/Add.Delete all menu: deletes all the games you have downloaded.251669764_myX5-2a_lu_en.book Page 46 Mardi, 20. juillet 2004 1:52 13

47ApplicationsThe Java™ function allows you to download applications and utilities in your phone.Downloading is done through the WAP function.Please go to the Applications menu to use the applications already installed or install others.This item may not be present on your phone’s menu, as it depends on your SIM.ToDo menuThis menu allows you to add ToDo’s, access category-based Todo management and delete all the ToDo’s.On the Applications menu, please select ToDo then the ToDo menu and press [Options].Select one of the actions in the list with the TSkeys and validate.-Add Written/Vocal ToDo: allows you to add ToDo of the text or voice type. Fill in the different items. Save the ToDo.-Memory: allows you to view the memory used by the different functions of your ToDo.-Categories: allows you to see the different ToDo categories, assign a specific ring tone to each individual ToDo, know the number of ToDo’s in each category and see them.-Delete all: allows you to delete all the ToDo’s from your ToDo.ServicesToDo251669764_myX5-2a_lu_en.book Page 47 Mardi, 20. juillet 2004 1:52 13

48ApplicationsToDo actions menuThis menu allows you to do all the actions possible on any ToDo.On the Applications menu, please select ToDo.To display a ToDo, select it in the list and press the OKkey.To display the different options, press [Options].-Delete: allows you to delete the ToDo.-Modify ToDo: allows you to modify the ToDo properties.-Send by IrDA: allows you to send the Vcalendar corresponding to the task by IrDA.-Add written ToDo/Add vocal ToDo: allows you to create a new ToDo.-Memory: allows you to view the memory used by the different functions of your ToDo.-Categories: allows you to see the different ToDo categories, assign a specific ring tone to each individual ToDo, know the number of ToDo’s in each category and see them.251669764_myX5-2a_lu_en.book Page 48 Mardi, 20. juillet 2004 1:52 13

49ApplicationsYou can send vCals to another phone using MMS or IrDA depending on your phone and the recipient’s phone.On the task list (Todo main menu), please select a task and in the Todo task actions menu list select Send.Then choose between MMS or IrDA for the type of sending and confirm.When sending MMS, please select your contact information (phone number or Email address) before confirming.If you receive a call while you are sending a vCal, the call will have precedence.The vCal receipt mode differs with the type of delivery:- By MMS, you receive a message you have to open to extract the vCal. You cannot add the event to your diary until you have saved it.- By IrDA or serial link, you receive a message and when the download is completed, a message appears on your phone display, asking you what you want to do with the vCal (save it, delete it…).You can assign a different beep to each Todo task.You can also assign a different ring tone to each Todo task category.Sending a vCalYou can send a vCal from each Todo task. Yet, this function is available only on certain models of phone.Receiving a vCal251669764_myX5-2a_lu_en.book Page 49 Mardi, 20. juillet 2004 1:52 13

50ApplicationsWorking from a PC, you can save/edit contacts, events and tasks stored in your phone.To do this, you will need:- either to connect your phone to the PC by means of a suitable data cable (serial or USB),- or to use the infrared function on your phone (please refer to the Connectivity paragraph in the Settings Chapter).Next, you will have to install the Wellphone software supplied with your phone or available from http://www.wellphone.com. This software will also enable you to save your contacts, events and tasks by means of copy/paste.Working from a PC, you can save/edit photos and ring tones not copyrighted stored in your phone.To do this, you will need:- either to connect your phone to the PC by means of a suitable data cable (serial or USB),- or to use the infrared function on your phone (please refer to the Connectivity paragraph in the Settings Chapter).Next, you will have to install the "My Pictures and Sounds" software (available from www.planetsagem.com site).Remark: If a call comes in during an exchange of data with your PC, the link will be interrupted and will have to be manually re-started.Exchange of data with a PC251669764_myX5-2a_lu_en.book Page 50 Mardi, 20. juillet 2004 1:52 13

51ApplicationsOn the Applications menu, please select the Calculator menu and [OK].You can use the calculator thanks to the following keys:SUp key: AddTDown key: SubtractXRight key: MultiplyWLeft key: DivideLeft programmable key: Equals or convertRight programmable key: Delete∗key or #: Decimal point.If no calculations are being run, pressing [Convert] allows you to use the value in the converter directly.CalculatorThis menu allows you to use your phone as a calculator.251669764_myX5-2a_lu_en.book Page 51 Mardi, 20. juillet 2004 1:52 13

52ApplicationsOn the Applications menu, please select the Converter menu and [OK].Enter a value and press the Skey to convert from one currency to another, or the Tkey to convert back.Pressing [Options] allows you to use the following options:Rapid exchangeIf the Rapid exchange is activated, the converter will work in the initial screen by entering the desired numbers and pressing the STkeys to convert.Exchange rateEnter the exchange rate corresponding to the chosen currency.CurrencyEnter the two types of currency to be converted.Go to calculatorThis option allows you to use immediately the value converted in the calculator.ConverterThis menu allows you to convert one currency to another.251669764_myX5-2a_lu_en.book Page 52 Mardi, 20. juillet 2004 1:52 13

53ApplicationsThe alarm works even when the phone is switched off.On the Applications menu, please select the Alarm menu and [OK].Activate or Deactivate the alarm and validate.Set the wake-up time by entering the numbers directly or using the TSkeys and validate. The alarm icon appears on the initial screen.On the Applications menu, please select the Timer menu and [OK].Activate or Deactivate the alarm and validate.Set the duration (hours/minutes) by entering the numbers directly or using the TSkeys and validate. The alarm icon appears on the initial screen.AlarmThis menu allows you to set and activate the alarm.TimerThis menu is used to set and activate the timer.251669764_myX5-2a_lu_en.book Page 53 Mardi, 20. juillet 2004 1:52 13

54OrganizerThis menu gives you access to your diary and get to a day, week, month or specific date. It lets you add events, access the global actions for all the events and manage them by event category.From the Organizer menu, select the Calendar menu.-Categories: allows you to see the different event categories, assign a specific ring tone to each individual category, know the number of events in each category and see them.-Add written event/Add vocal event: allows you to add events of the text or voice type. Fill in the different items. Save the event.-Clean-up: allows you to schedule the deletion of events that took place more than one day, week or month ago.-Memory: allows you to view the memory capacity used by the different functions of your diary.-Delete all: allows you to delete all the events from your diary.The other menus are:-See date: allows you to access events at a specific date.-See today: allows you to access the events for the current day and the actions possible on any event (see, modify, delete and send).-See week: allows you to access events on a week-by-week basis.-See month: allows you to access events on a month-by-month basis.Calendar menuThis menu lets you add events, manage events by category, see the available memory and delete all the events.251669764_myX5-2a_lu_en.book Page 54 Mardi, 20. juillet 2004 1:52 13

55OrganizerYou can send vCals to another phone using MMS or IrDA depending on your phone and the recipient’s phone.On the See today list, please select an event and in theTodo event actions menu list, select Send.Then choose between MMS, IrDA or serial link for the type of sending and confirm.For MMS deliveries, you should in addition select your contact information (phone number or Email address) before confirming.If you receive a call while you are sending a vCal, the call will have precedence.The vCal receipt mode differs with the type of delivery:- By MMS, you receive a message you have to open to extract the vCal. You cannot add the event to your diary until you have saved it.- By IrDA or serial link, you receive a message and when the download is completed, a message appears on your phone display, asking you what you want to do with the vCal (save it, delete it…).You can assign a different beep to each diary event.You can also assign a different ring tone to each diary event category.Sending a vCalYou can send a vCal from each diary event. Yet, this function is available only on certain models of phone.Receiving a vCal251669764_myX5-2a_lu_en.book Page 55 Mardi, 20. juillet 2004 1:52 13

56SettingsThis menu allows you to set your phone.Volume and ring toneThis menu allows you to allocate a ring tone to each type of event.On the Sounds menu, please select the Ring tones menu and [Select].Select one of the events given: Alarm, Calls, Messages, Local Infos and Fax and validate.Select the ring tone from the proposed list and validate.Adjust the volume using the TSkeys and validate.You can deactivate the sound by pressing the key.VibrateThis menu allows you to activate the vibrate mode for calls. On the Sounds menu, please select the Vibrate menu and [Select].Select the vibrate mode from the proposed choices and validate.SoundsThis menu allows you to customize the ring tones on your phone and to activate beep and vibrate modes.251669764_myX5-2a_lu_en.book Page 56 Mardi, 20. juillet 2004 1:52 13

57SettingsSilent modeThis menu allows you to switch to Silent mode.On the Sounds menu, please select Silent mode and [Select].Activate or deactivate Silent mode and validate.Silent mode can also be accessed via the initial screen by holding down the key. When the phone is in silent mode, the relevant icon appears on the initial screen. In this mode, the ring tone will not function, except for the alarm clock.Note: if you have activated the silent mode, it does not remain after switching off your phone.BeepsThis menu allows you to activate a beep for each type of event.On the Sounds menu, please select the Beeps menu and [Select].Select the type of beep you want to allocate from the proposed choices (Key beep, Network beep or Battery beep) and validate. Activate or deactivate the beep and validate.If you select key beeps, different options are given.251669764_myX5-2a_lu_en.book Page 57 Mardi, 20. juillet 2004 1:52 13

58SettingsRecorderThese menu allows you to record you own melody.On the Sounds menu, please select the Recordermenu and [Select].Pressing [Start] record your melody or your voice by means of the microphone then save it.Give it a name and validate. The new tone is saved in the list of ringtones and in Multimedia/My Sounds.If you select the recorder by means of a programmable key, the sound is saved in the Applications/ToDo menu.SkinsThis menu allows you to choose the skin of your phone, i.e. define its look (text font, colors, default animation, background image…).On the Display menu, please select Skins.Select the desired skin and validate.Skins are not downloadable but you can download screensavers and boot mode animations without changing those included by default with the skin.DisplayThis menu allows you to customize your screen by choosing a different presentation.251669764_myX5-2a_lu_en.book Page 58 Mardi, 20. juillet 2004 1:52 13

59SettingsWallpaperThis menu allows you to display the background picture you want on your phone.On the Display menu, please select the Wallpaper menu and [Select].Select the wallpaper and [Visualise]. The picture appears in the background of the screen.Press [OK] to validate this choice, or [Back] to go back to choice.Note: the Diaporama option allows you to display a wallpaper scrolling different pictures in a random way.ScreensaverThis menu allows you to display an animation when the phone is in standby mode.On the Display menu, please select the Screensaver menu and [Select].Select one of the screensavers given and [Visualise].The chosen screensaver appears on the screen, validate it.251669764_myX5-2a_lu_en.book Page 59 Mardi, 20. juillet 2004 1:52 13

61SettingsEnergy savingThis function is used to deactivate the screen and the keypad backlight and consequently increase the battery life of your phone.On the Display menu, please select the Energy saving menu and [Select].For Backlight two options are available: screen only and Full backlight.The screen goes out (standby mode).To quit this mode, press the key.On the Settings menu, please select the Camera menu and [Select].Timer: this menu enables you to take a photo with a 5, 10 or 15 secondtime delay. During preview of the photo, activate the delayed exposure by pressing on the button . (NB: if you want to take the photo immediately, then press on the Photo button).Click sound: This menu allows you to select the sound you will hear when taking a photo.Photo format: This menu allows you to choose the format in which your photo will be saved. There are several options:- either you systematically set the photo format to one of the following: High resolution or Mobile format,- or you can choose the photo format on a case-by-case basis.CameraThis menu allows you to set the camera features of your phone.251669764_myX5-2a_lu_en.book Page 61 Mardi, 20. juillet 2004 1:52 13

62SettingsOn the Settings menu, please select the Languages menu and [Select].Select your language and validate.If you select Automatic, the language used will be the one relative to your SIM card.Call forwardDepending on your subscription, this service allows you to forward incoming calls to a different number or to the voice mailbox.On the Calls menu, please select the Call forward menu and [Select].Choose the type of forwarding you want from the options available.LanguagesThis menu allows you to choose your phone's display language.CallsTheCalls menu allows you to manage all the calls functions (call forward, displaying numbers, call waiting, voicemail number, etc.).251669764_myX5-2a_lu_en.book Page 62 Mardi, 20. juillet 2004 1:52 13

63SettingsView last callsThis menu allows you to access the list of last numbers used.On the Calls menu, please select the View last calls menu and [Select].For every phone call are displayed on the screen:- its characteristics (shown with an icon),- the time (or date),- its duration.Select a call from the list and validate.Select one of the options given: Call, Store in your phonebook, Send a message, Delete, Delete all.You can also make the call by pressing the key.Fast access to the list of calls from the initial screen: press the key.CountersThis menu allows you to consult the duration of the up calls.It can also be used to check the volume of data exchanged in GPRS.On the Calls menu, please select the Counters menu and [Select].Select one of the options given.251669764_myX5-2a_lu_en.book Page 63 Mardi, 20. juillet 2004 1:52 13

64SettingsDisplay numberThis menu allows you to modify the status of the display number function.On the Calls menu, please select the Display number menu and [Select].Select one of the options given: Anonymous mode, My number, Callers’ number.Anonymous modeYou have the facility to mask your number on the phone of the person you are calling.Preset: network default mode.No: you choose not to activate anonymous mode and then to display your number.Yes: you choose to active anonymous mode and then not to display your number.Call waitingDuring a call, you may be informed that a caller is trying to reach you: you hear a special tone. The caller's identity is displayed on the screen (name or number).(Operator-dependent service) On the Calls menu, please select the Call waiting menu and [Select].You can activate, deactivate, or consult the status of the call waiting service in order to check if it is active or not. During a call, if a second caller tries to contact you, the screen displays the call warning. 251669764_myX5-2a_lu_en.book Page 64 Mardi, 20. juillet 2004 1:52 13

65SettingsAutomatic redialThis menu allows you to call back a caller you have not managed to reach.On the Calls menu, please select the Auto redial menu and [Select].You can set the redial function to inactive, on request or systematic.If you choose On demand, your phone will offer to redial your caller automatically if his number is busy.BlacklistThe blacklist is used to limit failures on automatic calls (calls generated by the automatic redial function or by applications: data, fax for example).On the Calls menu, please select the Blacklist menu and [Select].When several automatic calls failed with a number (number busy or unknown), this number is put in the blacklist and no automatic call will be done with this number any more until you delete it from the blacklist.Note: this function does not apply to the calls performed manually.251669764_myX5-2a_lu_en.book Page 65 Mardi, 20. juillet 2004 1:52 13

66SettingsVoicemailThis function is used to record your answer phone number.This number will be used during a call to the voice mailbox using the programmable keys.On the Calls menu, please select the Voicemail menu and [Select].Enter your answer phone number and validate.ALSThe ALS (Alternate Line Service) function allows you, depending on your subscription, to have two phone lines.The number of the line selected (1 or 2) for the calls appears on the initial screen.Keypad lockingThis menu allows you to lock the keypad to avoid unwanted key presses.On the Security menu, please select the Keypad locking menu and [Select].Select Activate or deactivate and validate. The lock icon appears on the initial screen.This function is also available in the initial screen pressing the andOKkeys.SecurityThis menu allows you to configure your phone's security settings.251669764_myX5-2a_lu_en.book Page 66 Mardi, 20. juillet 2004 1:52 13

67SettingsPIN numberThis menu allows you to activate and modify your phone's PIN.On the Security menu, please select the PIN number menu and [Select].To modify the PIN, select Modify and [Select].Enter old PIN and validate.Enter new PIN twice and validate.To activate or deactivate the PIN, select the Check PIN menu and [Select].Enter PIN and validate. Select Activate or Deactivate and validate.PIN2 numberYou have a second PIN number to allow you to access certain functions*.* These functions may or may not be available depending on your SIM card.Proceed as above in order to activate, deactivate or modify PIN2 number of your phone.251669764_myX5-2a_lu_en.book Page 67 Mardi, 20. juillet 2004 1:52 13

68SettingsPhone codeThe Phone code menu allows you to activate the phone code so that it is requested and checked whenever the phone is switched on if a different SIM card is used. This code is automatically linked to the SIM card installed when the phone is activated, for example to protect the phone if stolen.To activate or deactivate the phone code, select the Phone code menu and validate. Enter 0000 (the factory code, by default) and validate. Select Activate or Deactivate and validate.To modify the phone code, select Modify and validate.Enter old phone code and validate.Enter new phone code and validate.Enter phone code again to confirm it and validate.ConfidentialityThe Confidentiality function is used to delete numbers stored in View last calls and the SMS stored in the memory when a new SIM card is inserted into the phone.This menu allows the activation of automatic deletion, after power off/on, for messages and/or calls stored in the phone.On the Security menu, please select the Confidentiality menu and [Select].Select Activate or Deactivate and validate.251669764_myX5-2a_lu_en.book Page 68 Mardi, 20. juillet 2004 1:52 13

69SettingsOperatorThis menu allows you to modify the call barring.On the Security menu, please select the Operator menu and [Select].Access to this service depends on your type of subscription.Call barringCall barring can be applied to ALL calls (incoming and outgoing), to all incoming calls when you are away from your home country (if roaming available).This menu allows you to block the sending or reception of certain calls.Before you can use this service, a password will be provided by your operator when you take out your subscription.On the Security menu, please select the Call barring menu and [Select].Select Activate or Deactivate and validate.Access to this service depends on your subscription type.251669764_myX5-2a_lu_en.book Page 69 Mardi, 20. juillet 2004 1:52 13

70SettingsFixed diallingThis menu allows you to restrict the outgoing calls.The availability of this menu depends on your SIM.On the Security menu, please select the Fixed dialling menu and [Select].Enter PIN2 number and validate.Select Activate or Deactivate and validate.Proceed as for any other phonebook.When activating this function, only the numbers stored in the phonebook can be called.This phonebook is linked to the SIM card, and its size depends on the card's capacity.CostThis menu allows you to control the cost of your calls (*).On the Security menu, please select the Cost menu and validate.The Cost menu (*) lets you check the cost of the last call you made and of all the calls you made since you last deleted them.The Delete costs menu (*) lets you delete the cost of your last call and reset the cost counter after entering your PIN 2 code.(*) WARNINGDepending on how the networks and associated subscription cards are configured, some functions may be unavailable (these are marked out with *).251669764_myX5-2a_lu_en.book Page 70 Mardi, 20. juillet 2004 1:52 13

71SettingsOn the Settings menu, please select the Networks menu and [Select].Choose Preferred to view all the pre-registered networks.Choose Selection to activate (automatically or manually) one of the networks accessible in the area in which your are located.Choose Network type to select your network: GSM-DCS or PCS (depending on model).Choose GPRS to select the way you want to be attached on the GPRS network: always, or only when needed (when launching a data connection).(Function available depending on model)This menu allows you to customize the settings of your phone to make it as convenient as possible for you to use.On the Settings menu, please select the Short cuts menu and [Select].Select the key that you wish to modify and validate.Choose the function that you want to allocate to this key and validate.NetworksThis menu allows you to configure network preferences.Short cutsThis menu allows you to allocate functions to the programmable keys.251669764_myX5-2a_lu_en.book Page 71 Mardi, 20. juillet 2004 1:52 13

72SettingsSet Date/TimeThis menu allows you to set the date and time of your phone.On the Date / Time menu, please select Set Date/Time and [Select].Date: set the date by entering it directly in digital form or by using the TSkeys.Use the X (or W) key to access the next (or previous) entry field.Once the date is correct, validate it.Time: same procedure as for setting the date. Automatic updateThis menu allows you to choose manual or automatic updating of date and time (after switch off of your phone or when going abroad for instance) (service depending on the operator).From the Date / Time menu, please select Automatic upd. and [Select].Please select Automatic, Manual or On demand and press OK.Date / Time251669764_myX5-2a_lu_en.book Page 72 Mardi, 20. juillet 2004 1:52 13

73SettingsDisplayThis menu allows you to select the date and time display type.On the Date / Time menu, please select Display and [Select].In the list that appears, select the desired display type between:- Analog,-Digital,- None,by using the TSkeys and validate.Time zoneThis menu allows you to change time in relation to the GMT time.On the Date / Time menu, please select Time zone and [Select].Choose the time of the country desired by calculating the time from the GMT time.251669764_myX5-2a_lu_en.book Page 73 Mardi, 20. juillet 2004 1:52 13

74SettingsSummer timeThis menu allows you to set your phone to the summer/winter time.On the Date / Time menu, please select Daylight savings and [Select]. Select 1 h, 2 hSummer time or Winter time depending on the season, and validate.IrDAThis menu is used to configure the data exchange with another device (Personal Digital Assistant, PC, etc.).On the Connectivity menu, please select the IrDA parameters menu and validate.You may then:- send or receive images, sounds etc either using a different compatible phone or from a PC installed with "My Pictures and Sounds" (available from www.planetsagem.com), or- exchange contacts, events and tasks with your PC by means of the Wellphone software (page 53).ConnectivityYou can also connect it to your computer in order to receive data or fax through GSM or GPRS network (depending on subscription): configure the connection parameters of your computer using the Wellphone CD supplied as an accessory.251669764_myX5-2a_lu_en.book Page 74 Mardi, 20. juillet 2004 1:52 13

75SettingsSerial SpeedOn the Connectivity menu, please select the Serial Speed parameters menu and validate.The Speed menu enables you to select the speed to be used for data exchanges via your phone's serial port. Except for specific requirements, it is advisable to stick to the default setting: Automatic.Car kitThis menu allows you to configure your phone with a car kit.On the Connectivity menu, please select the Car kit menu and [Select].Choose one of the options given: Automatic response, Switch off, Kit volume.251669764_myX5-2a_lu_en.book Page 75 Mardi, 20. juillet 2004 1:52 13

76SettingsOn the Settings menu, please select WAP settings and [Select].You can add or modify URL addresses.This menu allows you to activate or deactivate the display of the help in the phone.WAP settingsThis menu allows you to set various parameters needed for WAP connection.Help251669764_myX5-2a_lu_en.book Page 76 Mardi, 20. juillet 2004 1:52 13

77Care and safety informationSafetyNever attempt to disassemble your phone. You alone are responsible for how you use your phone and any consequences of its use.As a general rule, always switch off your phone wherever the use of a phone is prohibited.Use of your phone is subject to safety measures designed to protect users and their environment.Do not use your phone in damp areas (bathroom, swimming pool…). Protect it from liquids and other moisture.Do not expose your phone to extreme temperatures from - 10°C to + 55°C.The physicochemical processes created by chargers impose temperature limits when charging the battery. Your phone automatically protects the batteries in extreme temperatures.Do not leave your phone within the reach of small children (certain removable parts may be accidentally ingested).Electrical safetyOnly use the chargers listed in the manufacturer’s catalogue. Using any other charger may be dangerous; it would also invalidate your warranty. Line voltage must be exactly the one indicated on the charger’s serial plate. Aircraft safetyWhen travelling by plane, you will need to switch your phone off when so instructed by the cabin crew or the warning signs.Using a mobile phone may be dangerous to the operation of the aircraft and may disrupt the phone network.Its use is illegal and you could be prosecuted or banned from using cellular networks in the future if you do not abide by theseregulations.Explosive materialsPlease comply with warning signs at petrol station asking you to switch your phone off. You will need to comply with radio equipment usage restrictions in places such as chemical plants, fuel depots and at any location where blasting operations are under way.Electronic equipmentTo avoid the risk of demagnetisation, do not let electronic devices close to your phone for a long time.Electronic medical equipmentYour phone is a radio transmitter which may interfere with electronic medical equipment or implants, such as hearing aids, pacemakers, insulin pumps, etc. It is recommended that a minimum separation of 15 cm be maintained between the phone and an implant. Your doctor or the manufacturers of such equipment will be able to give you any advice you may need in this area. HospitalsAlways make sure that your phone is switched off in hospitals when so instructed by warning signs or by medical staff. Road safetyDo not use your phone when driving. In order to give your full attention to driving, stop and park safely before making a call. You must comply with any current legislation.251669764_myX5-2a_lu_en.book Page 77 Mardi, 20. juillet 2004 1:52 13

78Care and safety informationSAR - FCC CERTIFICATIONTHIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposureto radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are partof comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are basedon standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientificstudies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age andhealth.The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, orSAR. The SAR limit set by the FCC is 1.6 W/kg (*). Tests for SAR are conducted using standard operating positions acceptedby the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR isdetermined at the highest certified power level, the actual SAR level of the phone while operating can be well below themaximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power requiredto reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed thelimit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations(i.e., at the ear and worn on the body) as required by the FCC for each model.The highest SAR values for this model phone as reported to the FCC when tested for use at the ear and when worn on the bodyare given in the following table:While there may be differences between the SAR levels of various phones and at various positions, they all meet thegovernment requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levelsevaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCCand can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID M9H95MYX52A.(*) In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 Watts/kilogram (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.Highest SAR valuesGSM 850 Mhz PCS 1900 MhzHead 0.794 W/kg 0.369 W/kgBody 0.752 W/kg 0.608 W/kgSafety information.fm Page 78 Mercredi, 28. juillet 2004 10:06 10

79Care and safety informationAdvice for limiting exposure to radiofrequency (RF) fieldsFor individuals concerned about limiting their exposure to RF fields, the World Health Organization (WHO) provides the followingadvice:Precautionary measures: Present scientific information does not indicate the need for any special precautions for the use of mobile phones. If individuals are concerned, they might choose to limit their own or their children’s’ RF exposure by limiting the length of calls, or using "hands-free" devices to keep mobile phones away from the head and body. Further information on this subject can be obtained from the WHO home page http://www.who.int/peh-emf WHO Fact sheet 193: June 2000.251669764_myX5-2a_lu_en.book Page 79 Mardi, 20. juillet 2004 1:52 13

80WarrantyYou must always use your phone for the purpose for which it was designed, under normal operating conditions. SAGEM SA declines all responsibility for any use outside of the scope of its designed purpose and for any consequences of this use.The software program developed by SAGEM remains the exclusive property of SAGEM SA. It is therefore highly prohibited to modify, translate, de-compile or disassemble this software program or any part thereof.Usage precautionsYour phone allows you to download ring tones, icons and animated screensavers. Some of these items may contain data that may cause malfunctions of your phone or data losses (virus for example). For this reason, SAGEM SA rejects all responsibility concerning (1) the reception of downloaded data or losses of the said data,(2) the impact on the operation of the phone and (3) damages resulting from receiving the said downloaded data or loss of said data. In addition, SAGEM SA states that a failure caused by receiving downloaded data that do not comply with the specifications set by SAGEM SA is excluded from the warranty. Consequently, the diagnosis and repair of a phone infected by the said downloaded data will be at the expense of the customer.Any content that you download to your phone may be protected by copyright belonging to third parties and consequently you may not have the right to use this content or its use may be restricted. Consequently it is up to you to ensure that you have permission, such as under the terms of a license agreement, to use any content that you download. Furthermore, SAGEM SA does not guarantee the accuracy nor the quality of any content that you download. You alone are responsible for the content that you download to your mobile phone and how you use it. SAGEM SA cannot be held responsible for this content nor for its use.It is your responsibility to ensure compliance, at your own expense, with the laws and regulations applicable in the country where you use your phone.Warranty conditionsWhenever you wish to make use of the warranty, please contact your vendor and present him with the purchasing paperwork that he gave you. If a fault occurs, he will advise you.1.The new phone (excluding consumables), including new accessories bundled with the phone, are guaranteed by SAGEM SA, parts and labour (apart from travel) against any manufacturing fault for a period of twelve (12) months with effect from the sale of the phone to the customer, on presentation of the paperwork stating the purchase date of the phone.Phones that have been repaired or replaced as standard during the warranty period stated above are guaranteed (parts and labour) until the later of these two dates:Expiry of the guarantee period of twelve (12) months stated above or three (3) months with effect from the date of support provided by SAGEM SA.Your legal rights under the terms of applicable national law as well as your rights in relation to your retailer, as set out in the sales contract, remain applicable and are not in any way affected by this guarantee.In any disputes, the phone is covered by the legal warranty against the consequences of faults or hidden defects in compliance with articles 1641 and subsequent of the French civil code.251669764_myX5-2a_lu_en.book Page 80 Mardi, 20. juillet 2004 1:52 13

81Warranty2.All faulty phones under warranty will be replaced or repaired free of charge at SAGEM SA's option (with the exclusion of repairof any other damage), once it has been specified that the work required for the application of the warranty will be done in a workshop and that the return costs (transport and insurance) of the phone to the address to be indicated to it by the SAGEM SA after-sales service, whose phone number will appear on the delivery note, will be charged to the customer.Subject to essential legal provisions, SAGEM SA does not accept any warranty, explicit or implicit, other than the warranty provided expressly in this chapter, nor shall SAGEM SA accept responsibility for any immaterial and/or indirect damages (such as loss of orders, loss of profit or any other financial or commercial damage) under the warranty or not.3.The acceptance of a phone under warranty demands that a purchase document that is legible and without modi-fication, stating vendor's name and address, date and place of purchase, type of phone and IMEI, are attached to the warranty, and that the information on the phone identification label is legible and that this label or any other seal has not been tampered with.The warranty applies in normal conditions of use.Prior to sending the phone for repair, it is the customer's responsibility to backup at his expense the customized data stored in the phone (phonebook, settings, wallpapers). A list of backup facilities can be provided by SAGEM SA on request. The responsibility of SAGEM SA cannot be invoked if damage occurs to customer files, programs or data. The information or operating elements and the contents of files will not be re-installed in any case in the event of loss. SAGEM SA may decide, at its option, to repair the phone with new or reconditioned parts, replace the phone with a new phone or, in any dispute, a phone in good working condition. During its work SAGEM SA reserves the facility to make, where necessary, any technical modifications to the phone where these modifications doe not adversely affect its initial purpose. Faulty parts to be replaced during a repair under warranty will become the property of SAGEM SA.The phone repair and standstill time during the warranty period may not lead to an extension of the warranty period as stated in article 1 above, provided no other vital provisions have been agreed.The application of the warranty is subject to the full payment of the sums due for the phone when the request for support is made.4.The following are excluded from the warranty:Breakdowns or malfunctions due to non-compliance with the installation and use instructions, to an external cause of the phone (shock, lightning, fire, vandalism, malice, water damage of any type, contact with various liquids or any harmful agent, unsuitable electric current...), to modifications of the phone made without the written consent of SAGEM SA, to a servicing fault, as described in the documentation supplied with the phone, to lack of supervision or care, to poor environmental conditions of the phone (especially temperature and hygrometry, effects of variations in electric voltage, interference from the mains network or earth) or even due to a repair, a call-out (opening or trying to open the phone) or to servicing done by personnel not approved by SAGEM SA.Damage resulting from inadequate packaging and/or poor packing of the phone sent back to SAGEM SA.Normal wear and tear of the phone and accessories. 251669764_myX5-2a_lu_en.book Page 81 Mardi, 20. juillet 2004 1:52 13

82WarrantyCommunication problems linked with a poor environment, especially:Problems accessing and/or logging onto the Internet, such as breakdowns of the access network, the failure of the subscriber's or his correspondent's line, transmission fault (poor geographic coverage by radio transmitters, interference, disturbance, fai-lure or poor quality of phone lines...), a fault inherent to the local network (cabling, file server, user phone) and/or transmission network fault (interference, disturbance, failure or poor quality of the network...).Change of parameters of the cellular network made after the phone was sold.Supply of new software versions.Current servicing work: delivery of consumables, installation or replacement of these consumables…Call-outs for phone or software modified or added without the written consent of SAGEM SA. Faults or disruptions resulting from the use of products or accessories not compatible with the phone.Phones returned to SAGEM SA without having complied with the return procedure specific to the phone cove-red by this warranty.The opening or closing of a SIM operator key and call-outs resulting in the non-operation of the phone resulting from the opening or closing of SIM operator key done without the agreement of the original operator.5.In the cases of warranty exclusion and of expiry of the warranty period, SAGEM SA shall draw up an estimate to be given to the customer for acceptance before any call-out. The repair and carriage costs (there and back) given in the accepted estimate willbe charged to the customer.These provisions are valid unless a special written agreement has been made with the customer. If one of the provisions turns out to infringe a legally essential rule that consumers could have the benefit of under the national legislation, this provision will not be applied, but all other provisions will remain valid.251669764_myX5-2a_lu_en.book Page 82 Mardi, 20. juillet 2004 1:52 13

83End User Licence Agreement (EULA), for the softwareCONTEXT AND ACCEPTATION OF THE AGREEMENTYou have acquired a Mobile Phone device ("DEVICE"), manufactured by SAGEM SA (SAGEM), that includes software either developed by SAGEM itself or licensed third party Software suppliers ("SOFTWARE COMPANIES") to SAGEM with the rights to sub-license it to the purchaser of the device. Those installed software products whatever their company of origin, and wherever the name of the company of origin is indicated of not in the DEVICE documentation, as well as associated media, printed materials, and "online" or electronic documentation ("SOFTWARE") are protected by international intellectual property laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved. IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT ("EULA"), DO NOT USE THE DEVICE OR COPY THE SOFTWARE. INSTEAD, PROMPTLY CONTACT SAGEM FOR INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S) FOR A REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE, WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT).SOFTWARE includes software already installed on the DEVICE ("DEVICE Software") and Software contained on the CD-ROM disk ("Companion CD"), if any is supplied with the product. GRANT OF SOFTWARE LICENCEThis EULA grants you the following licence: DEVICE Software. You may use the DEVICE Software as installed on the DEVICE. All or certain portions of the DEVICE Software may be inoperable if you do not have and maintain a service account with an appropriate Mobile Operator, or if the Mobile Operator's network facilities are not operating or configured to operate with the DEVICE software.COMPANION CD. If any is supplied, additional software for your personal computer is included with your DEVICE. You may install and use the software component(s) contained in the Companion CD only in accordance with the terms of the printed or online end user license agreement(s) provided with such component(s). In the absence of an end user license agreement for particular component(s) of the Companion CD, you may install and use only one (1) copy of such component(s) on the DEVICE or a single computer with which you use the DEVICE..Security Updates. The SOFTWARE may include digital rights management technology. If SOFTWARE does contain digital rights management technology, content providers are using the digital rights management technology ("DRM") contained in the SOFTWARE to protect the integrity of their content ("Secure Content") so that their intellectual property, including copyright, in such content is not misappropriated. Owners of such Secure Content ("Secure Content Owners") may, from time to time, request manufacturers or SOFTWARE SUPPLIERS to provide security related updates to the DRM components of the SOFTWARE ("Security Updates") that may affect your ability to copy, display and/or play Secure Content through the SOFTWARE or third party applications that utilise the DRM. You therefore agree that, if you elect to download a licence from the Internet which enables your use of Secure Content, Suppliers may, in conjunction with such licence, also download onto your DEVICE such Security Updates that a Secure Content Owner has requested that SOFTWARE SUPPLIERS distribute. SAGEM and SOFTWARE SUPPLIERS will not retrieve any personally identifiable information, or any other information, from your DEVICE by downloading such Security Updates. 251669764_myX5-2a_lu_en.book Page 83 Mardi, 20. juillet 2004 1:52 13

84End User Licence Agreement (EULA), for the softwareDESCRIPTION OF OTHER RIGHTS AND LIMITATIONSCOPYRIGHT. All title and intellectual property rights in and to the SOFTWARE (including but not limited to any images, photographs, animations, video, audio, music, text and "applets," incorporated into the SOFTWARE), the accompanying printed materials, and any copies of the SOFTWARE, are owned by SAGEM or the SOFTWARE SUPPLIERS. You may not copy the printed materials accompanying the SOFTWARE. All title and intellectual property rights in and to the content which may be accessed through use of the SOFTWARE is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such content. All rights notspecifically granted under this EULA are reserved by SAGEM and the SOFTWARE SUPPLIERSLimitations on Reverse Engineering, Decompilation and Disassembly. You may not reverse engineer, decompile, or disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation.Single DEVICE. The DEVICE Software is licensed with the DEVICE as a single integrated product. The DEVICE Software installed in the memory of the DEVICE may only be used as part of the DEVICE.Single EULA. The package for the DEVICE may contain multiple versions of this EULA, such as multiple translations and/or multiple media versions (e.g., in the user documentation and in the software). Even if you receive multiple versions of the EULA, you are licensed to use only one (1) copy of the DEVICE Software. Software Transfer. You may not permanently transfer any of your rights under this EULA with regard to the DEVICE Software or Companion CD, except as permitted by the applicable Mobile Operator. In the event that the Mobile Operator permits such transfer, you may permanently transfer all of your rights under this EULA only as part of a sale or transfer of the DEVICE, provided you retain no copies, you transfer all of the SOFTWARE (including all component parts, the media and printed materials, any upgrades , this EULA and, if applicable, the Certificate(s) of Authenticity), and the recipient agrees to the terms of this EULA. If the SOFTWARE is an upgrade, any transfer must include all prior versions of the SOFTWARE.Software Rental. You may not rent or lease the SOFTWARE. Speech/Handwriting Recognition. If the SOFTWARE includes speech and/or handwriting recognition component(s), you should understand that speech and handwriting recognition are inherently statistical processes; that recognition errors are inherent in the processes; and that errors can occur in the component's recognition of your handwriting or speech, and the finalconversion into text.. Neither SAGEM nor its suppliers shall be liable for any damages arising out of errors in the speech andhandwriting recognition processes.NOTICE REGARDING THE MPEG-4 VISUAL STANDARD. The SOFTWARE may include MPEG-4 visual decoding technology. MPEG LA, L.L.C. requires the following notice: USE OF THIS SOFTWARE IN ANY MANNER THAT COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED, EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR INFORMATION (i) GENERATED BY AND OBTAINED WITHOUT CHARGE FROM A CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE, AND (ii) FOR PERSONAL USE ONLY; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA, L.L.C. If you have questions regarding this Notice, please contact MPEG LA, L.L.C., 250 Steele Street, Suite 300, Denver, Colorado 80206; Telephone 303 331.1880; FAX 303 331.1879 251669764_myX5-2a_lu_en.book Page 84 Mardi, 20. juillet 2004 1:52 13

85End User Licence Agreement (EULA), for the softwareTermination. Without prejudice to any other rights, SAGEM may terminate this EULA if you fail to comply with the terms and conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE and all of its component parts.Consent to Use of Data. You agree that SOFTWARE SUPPLIERS may collect and use technical information gathered in any manner as part of product support services related to the SOFTWARE. SOFTWARE SUPPLIERS may use this information solely to improve their products or to provide customised services or technologies to you. SOFTWARE SUPPLIERS may disclose this information to others, but not in a form that personally identifies you.Internet Gaming/Update Features. If the SOFTWARE provides, and you choose to utilise, the Internet gaming or update features within the SOFTWARE, it is necessary to use certain computer system, hardware, and software information to implement the features. By using these features, you explicitly authorise SOFTWARE SUPPLIERS to use this information solely to improve their products or to provide customised services or technologies to you. SOFTWARE SUPPLIERS may disclose this information to others, but not in a form that personally identifies you. Internet-Based Services Components. The SOFTWARE may contain components that enable and facilitate the use of certain Internet-based services. You acknowledge and agree that SOFTWARE SUPPLIERS may automatically check the version of the SOFTWARE and/or its components that you are utilising and may provide upgrades or supplements to the SOFTWARE that may be automatically downloaded to your Device. Links to Third Party Sites. The SOFTWARE may provide you with the ability to link to third party sites through the use of the SOFTWARE. The third party sites are not under the control of SAGEM. Neither SAGEM nor its affiliates are responsible for (i) the contents of any third party sites, any links contained in third party sites, or any changes or updates to third party sites, or (ii) webcasting or any other form of transmission received from any third party sites. If the SOFTWARE provides links to third partysites, those links are provided to you only as a convenience, and the inclusion of any link does not imply an endorsement of thethird party site by SAGEM or its affiliates.Additional Software/Services. The SOFTWARE may permit SAGEM to provide or make available to you SOFTWARE updates, supplements, add-on components, or Internet-based services components of the SOFTWARE after the date you obtain your initial copy of the SOFTWARE ("Supplemental Components"). If SAGEM provides or makes available to you Supplemental Components and no other EULA terms are provided along with the Supplemental Components, then the terms of this EULA shall apply. SAGEM reserves the right to discontinue any Internet-based services provided to you or made available to you through the use of the SOFTWARE.EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is subject to U.S. export jurisdiction. You agree to comply with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other governments.UPGRADES AND RECOVERY MEDIA -DEVICE Software. If the DEVICE Software is provided by SAGEM separate from the DEVICE on media such as a ROM chip, CD ROM disk(s) or via web download or other means, and is labelled "For Upgrade Purposes Only", you may install one copy of such DEVICE Software onto the DEVICE as a replacement copy for the existing DEVICE Software and use it in accordance with this EULA, including any additional EULA terms accompanying the upgrade DEVICE Software.251669764_myX5-2a_lu_en.book Page 85 Mardi, 20. juillet 2004 1:52 13

86End User Licence Agreement (EULA), for the software-COMPANION CD. If any Companion CD component(s) is provided by SAGEM separate from the DEVICE on CD ROM disk(s) or via web download or other means, and labelled "For Upgrade Purposes Only" , you may (i) install and use one copy of such component(s) on the computer(s) you use to exchange data with the DEVICE as a replacement copy for the existing Companion CD component(s). RESPONSIBILITIESSUPPORT AND INFORMATION Should you have any questions concerning this EULA, or if you desire to contact SAGEM ]for any other reason, please refer to the address provided in the documentation for the DEVICE.NO LIABILITY FOR CERTAIN DAMAGES. EXCEPT AS PROHIBITED BY LAW, SAGEM SHALL HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. FOR APPLICABLE LIMITED WARRANTIES AND SPECIAL PROVISIONS PERTAINING TO YOUR PARTICULAR JURISDICTION, PLEASE REFER TO YOUR WARRANTY BOOKLET INCLUDED WITH THIS PACKAGE OR PROVIDED WITH THE SOFTWARE PRINTED MATERIALS.251669764_myX5-2a_lu_en.book Page 86 Mardi, 20. juillet 2004 1:52 13

87Java™You are the owner of a SAGEM mobile phone which gives you the ability to download applications and games to be executed on your phone thanks to the built-in Java™ engine. However, receiving applications from everywhere implies some basic knowledge of the possible effects of such download. Thank you for spending a few minutes reading these pages: this will prevent you from performing action without measuring the consequences.Security considerationsJava™ MIDP technology is an efficient way to provide powerful applications in mobile phones. It allows use, by "over the air" downloaded applications or games, of the great features built-in in a mobile phone (SMS sending and receiving, multimedia playback and recording, network access…).All these MIDP 2.0 features cannot be simply exposed to any MIDlet installed in the handset: a careful access control system is implemented in the device to protect your private data and airtime consumption.Access controls are gathered in 9 security groups:• Network access (GPRS/GSM data airtime consumption, HTTP/web connections…)• Auto invocation (MIDlet can wake up at a given time or when receiving a SMS)• Phone call (ability to initiate a phone call)• Local connectivity (IrDA or serial interfaces use by the MIDlet)• Messaging receive (SMS,SMS-CB interception by a MIDlet)• Messaging sending (SMS sending by a MIDlet)• Read User data (Subscriber identity, Phonebook, Agenda read access from a MIDlet)• Write User data (New phonebook or agenda entry)• Multimedia recording (ability to control camera or microphone from a MIDlet)WARNING: When running a Java™ application, you may be prompted to grant access to protected features. These features are protected because using them could incur you cost, or involve your personal data. Read the security popup message carefully, to understand what feature is requested, and decide whether it is legitimate for the application to perform it. In case of doubt, don't hesitate to refuse access by selecting the "No" button!The security configuration menu is an expert feature! You must know exactly what you are doing before attempting to change security parameters of a MIDlet. Misunderstanding changes may render MIDlet non functional and/or lead to higher risks for your private data or impact your airtime consumption. Any changes in the security configuration are done under your responsibility. In no case shall SAGEM SA and/or your network provider be liable for any damages deriving from or arising out of such changes in the security configuration.You must be aware that applications downloaded to your phone could cause the phone to perform actions for which you will be billed, like making calls and sending SMS. Depending on your operator's billing policy, you may also be charged to download the application because of airtime consumption.251669764_myX5-2a_lu_en.book Page 87 Mardi, 20. juillet 2004 1:52 13

88Java™According to the security status of an installed MIDlet (see below), each of these security groups has one among 5 possible authorizations levels (listed from the more restrictive to the more permissive):• Never The security group completely prevents access to the protected features.• Per use Each time MIDlet tries to use protected feature, user is prompted to grant access.• Per session First time a MIDlet uses a protected function, user is prompted to grant access like in "Per use" authorization but access is granted until the MIDlet terminates.• Single confirmation The first time in the whole MIDlet life a MIDlet uses a protected feature, user is prompted to grant access. It remains valid until the MIDlet is removed from the handset.•Always The security group unconditionally grants access to protected features.A MIDlet has a security status which is either "uncertified", or else "certified".An "uncertified" status means that the source of the MIDlet could not be verified by the mobile phone at installation time. As far as the phone knows, the MIDlet could have been written by anyone.A "certified" status means that the MIDlet was digitally signed by a known party, whose name is displayed by the mobile phone. This means that the mobile phone successfully authenticated the named party as the source of the MIDlet. Security permissions are different for "uncertified" or "certified" MIDlets, and may be different for different sorts of named parties. Usually "uncertified" security permisions are more restrictive than "certified" ones.Security configuration menuWhen a MIDlet is installed in the mobile phone, default security authorizations are applied. This default security configuration may be altered through the "Settings/Security" menu of an installed MIDlet.Once in the "Security" menu, the security status of the MIDlet is displayed (see "Security considerations" paragraph above).If you do not want to enter the security menu, simply select "Back" button.You can proceed by selecting "Ok" button.The menu displayed allows you to increase or decrease permissions currently applied to the current MIDlet for each of the security groups. When you set a more permissive authorization to a security group than the current value, mobile phone asks you to confirm your increased risk exposure.The maximum risk exposure increase is limited by the security status. Depending of the manufacturing configuration, it means, for example, that "Net Access" security group authorization cannot be set to a permissive value higher that "Session" for an "uncertified" MIDlet ("Single confirmation" and "Always" are unavailable in the security configuration menu) but an operator "certified" MIDlet may have all permission values available without any limitations. 251669764_myX5-2a_lu_en.book Page 88 Mardi, 20. juillet 2004 1:52 13

89Java™What is Java™?Java™ is a new technology enabling use of powerful applications in the mobile phone area. Business applications and games are easily downloadable by the end-user on a Java™ featured handset.Your mobile phone is a MIDP 2.0 compliant Java™ platform which implements WMA (SMS support) and MMAPI (Multimedia support) options, providing an exciting environment to run highly graphical, networked and intuitive MIDP applications.Such applications may be, for example, a wide range of games and appealing applications like action and logic games, agenda, e-Mail reader, Web browser…What is a MIDlet?A Java™ application or a game designed to run in a mobile phone is named a MIDlet (MIDP applet).A MIDlet is usually made of 2 files:•The JAD file• The JAR fileJAD file stands for Java™Application Descriptor. It is a small file describing the content of a JAR file (version, vendor name, size…) and displayed by the mobile phone. JAD file size is usually less than 2 kilo-bytes large.JAR file stands for Java™ Archive. It refers to the application data themselves (program, images, sound). A JAR file may be up to 200 kilo-bytes large.NOTE: In rare circumstances, MIDlet vendors may provide no JAD file and the MIDlet is the JAR file alone. In such a case it is your only responsibility to evaluate the risk to download the JAR file without possibility of consulting the JAD file.Downloading a MIDlet (Java™ game or application)MIDlets are easily downloaded in the mobile phone through the Games or Applications menus or through the WAP browser. In almost all cases, you will first receive a JAD file which will be displayed on the screen. Much care must be given in examining the content of the file as explained further.When you select a JAD file, your mobile phone downloads it, displays data contained and prompts you to acknowledge the JAR file download. The popup displays information below:• Name of the MIDlet• Version• Size (JAR file size)• Vendor name• Security status (IMPORTANT: see "Security considerations" paragraph below)• JAR file URL.251669764_myX5-2a_lu_en.book Page 89 Mardi, 20. juillet 2004 1:52 13

90Java™If you do not want to download the main data (JAR file), you shall refuse to acknowledge further airtime consumption by selecting "Cancel" (JAR file is not downloaded). If you agree on the MIDlet installation, just select "Ok". The MIDlet is installed with security levels set to default values associated with its security status.Before downloading an application, such a message may appear: "Your handset cannot identify the application, please be sure of the source of the application before installing the application".You shall read carefully the next two paragraphs to fully understand Java™ MIDP security concerns.TrademarksJava™ and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries.DisclaimerAs explained hereabove, some downloaded items may contain data or may induce actions which may cause malfunctioning of your mobile phone or loss or corruption of data or abnormal increase of your airtime consumption.YOU EXPRESSLY ACKNOWLEDGE THAT THE DOWNLOAD OF ANY APPLICATIONS INCLUDING JAVA APPLICATIONS OR GAMES IS DONE UNDER YOUR EXCLUSIVE RESPONSIBILITY. IN NO EVENT SHALL SAGEM SA, YOUR NETWORK SERVICE PROVIDER OR THEIR AFFILIATES BE LIABLE FOR ANY LOST PROFITS OR COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, LOSS OF PROFITS, INTERRUPTION OF BUSINESS, LOSS OF DATA OR FOR ANY SPECIAL, INDIRECT, INCIDENTAL, ECONOMIC, OR CONSEQUENTIAL DAMAGES ARISING UNDER CONTRACT, TORT, NEGLIGENCE, OR OTHER THEORY OF LIABILITY RELATING TO THE DOWNLOAD OF ANY APPLICATION BY ANY MEANS, INCLUDING JAVA APPLICATIONS OR GAMES IN SAGEM DEVICES. YOU EXPRESSLY ACKNOWLEDGE THAT ANY APPLICATIONS INCLUDING JAVA APPLICATIONS OR GAMES ARE PROVIDED STRICTLY "AS IS". SAGEM SA AND/OR YOUR NETWORK SERVICE PROVIDER EXTEND NO WARRANTY WHATSOEVER THERETO. SAGEM SA AND/OR YOUR NETWORK SERVICE PROVIDER DISCLAIM ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY OF MERCHANTABILITY, FITNESS OF ANY APPLICATIONS INCLUDING JAVA APPLICATIONS OR GAMES FOR A SPECIFIC PURPOSE, SATISFACTORY QUALITY, SECURITY OR OTHERWISE.251669764_myX5-2a_lu_en.book Page 90 Mardi, 20. juillet 2004 1:52 13

91TroubleshootingPROBLEM - SITUATIONACTIONSIt is impossible to switch the phone onRemove and replace the battery.If you still cannot switch the phone on, charge the battery:- Put it on charge for at least 15 minutes before switching it back on again.- Check if the battery icon is scrolling up and down.- If so, the phone is charging.- If not, please take the charger out and put it back on again. Please check that the charging icon is scrolling up and down.- If you still cannot switch the phone on, please disconnect the charger, put it back on again and please repeat that manipulation several times.- If the charging icon is still not scrolling up and down, please contact your after-sales services.- When the charging icon has stopped scrolling up and down, the battery is charged.Battery status unknownThe phone does not recognize the battery. Please check the position of the battery.LOW BATTERYThis message is displayed when the battery becomes too weak. The phone switches itself off automatically. Put the phone on charge.SIM not presentCheck if the SIM card is present and properly positioned / inserted.Check the condition of the SIM card. If damaged, please go back to the operator's shop for advice. Contact your after-sales service if the message persists.Incorrect PIN codeAn incorrect PIN code has been entered. Be careful! Three incorrect PIN codes will block the SIM Card.SIM BLOCKEDYou have entered three incorrect PIN codes.Enter your PUK code to unblock your SIM Card.You must enter: **05*PUK*PIN*PIN#You must enter the PUK code (Personal Unblocking Key) given by your network provider.10 errors will permanently block your SIM Card. You must then contact your network provider to get a new one.251669764_myX5-2a_lu_en.book Page 91 Mardi, 20. juillet 2004 1:52 13

92TroubleshootingSIM LOCKEDOn network providers’ request, the handset can only be used with some types of SIM cards. This message means that the SIM card you are using does not fit with the phone. Take the SIM card out, and switch it back on. If the message SIM not present appears on the screen, you will need to check its compatibility next to the place where you bought it. If not, please contact your after-sales service.No call connectionCheck that the number you have dialled is correct.If the letter R is displayed on the top right corner of the screen, without any network name displayed, only emergency services can be called.Check the status of your credit.Check that the SIM Card you are using offers the service you are requesting ; check if its validity has not expired.Check and deactivate the outgoing calls restriction when necessary.The network could be saturated. Try later.If the problem persists, please contact your Technical Helpdesk.No receiving callsTry to make a call in order to check that the phone and the networks are operational. Check and deactivate the permanent call forwarding (permanent call forwarding icon displayed on the screen). Check and deactivate the incoming calls restriction when necessary.If the problem persists, please contact your Technical Helpdesk.Quality reception when callingAvoid placing your fingers on the top of the phone, where the aerial is integrated: the phone will have to use full strength to establish a quality transmission.Impossible to send messageCheck that the message centre number is correctly entered.To do so, please select the menu Messages, select Options, select MSGcentre n° and check the number entered. Please contact your network provider to get this number.PROBLEM - SITUATIONACTIONS251669764_myX5-2a_lu_en.book Page 92 Mardi, 20. juillet 2004 1:52 13

94TroubleshootingHow do I download ring tones?Logon to one of the following site via your computer: www.planetsagem.com. These site offer to send ring tones to your phone in the form of an SMS. You can also logon to your operator's site. Once the SMS has been received, all you have to do is save it: validate the option « Save messages », the tune will then be added to your list. In addition, you can logon to some sites by phone.How do I free up memory to download my objects (sounds, images)Go into the Multimedia menu, select My Pictures or My Sounds then delete some objects.How do I free up memory to receive new messages?Manage your Outbox carefully. It is recommended not saving them automatically: too many messages saved will quickly fill up the available memory and no further messages will be received. To delete them, please go into the Messages menu, select Outbox then delete some messages. Manage your Inbox carefully also.How do I free up memory to store new contacts in my Phonebook?It is highly recommended to manage your Phonebook carefully.If you have received pictures enclosed to a Vcard, please save or delete them.How can I increase the efficiency of my phone?The most efficient actions are as follows:Please keep your phone safely in order to avoid pressing the keys unnecessarily: every time a key is pressed the screen lights up.You can deactivate the screensaver or select the activation time to be more than every 300 s (the screensaver uses processing power).Make sure that you don’t obstruct the antenna with your fingers when using the phone (see page 19).PROBLEM - SITUATIONACTIONS251669764_myX5-2a_lu_en.book Page 94 Mardi, 20. juillet 2004 1:52 13

95IndexAAccessories p12Activating your phone p17Alarm p53Anonymous mode p64BBacklight p61BatteryCharging the battery p20Installing the battery p18Beeps p57CCalculator p51Calendar p54Call barring p69Calls (menu)Automatic redial p65Call forward p62Call waiting p64Counters p63Display number p64View last calls p63Camera p37, p61Car kit p75Charger p12Confidentiality p68Contact p22, p38Add contact p22Call p25Delete p24Display contact p24Mailing list p23Modify p24Contacts p18Contrast p60Converter p52Cost p70Currencies p52DDate / Time p72Display p58EEnergy saving p61FFax p74Fixed dialling p70GGames p46Getting started p18GPRS p43, p44, p45GSM p44HHands-free p19Help p15, p76IIcon p16Initial screen p16Input modes p28IP address p44IrDA p74KKeypad locking p13, p66LLanguages p62Local information p35251669764_myX5-2a_lu_en.book Page 95 Mardi, 20. juillet 2004 1:52 13

Navigation menu