Sagem Wireless BC06S4 Mobile phone User Manual 253015633 LU FCC my411C en

Download:
Mirror Download [FCC.gov]
Document ID	865197
Application ID	xY7O+TIJ8PBeUuQJY3uZCA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	219.92kB (2748986 bits)
Date Submitted	2007-11-07 00:00:00
Date Available	2007-11-07 00:00:00
Creation Date	2007-09-27 16:39:22
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2007-09-27 16:44:11
Document Title	253015633_LU_FCC_my411C_en.book
Document Creator	FrameMaker 7.0
Document Author:	g094216

ENGLISH
253015633_LU_FCC_my411C_en.book Page 1 Jeudi, 27. septembre 2007 4:40 16
253015633_LU_FCC_my411C_en.book Page 2 Jeudi, 27. septembre 2007 4:40 16
253015633_LU_FCC_my411C_en.book Page 3 Jeudi, 27. septembre 2007 4:40 16
You have just purchased a SAGEM phone. We congratulate you! In order to use your phone efficiently and safely, we
recommend that you read this handbook carefully.
Your phone can be used internationally in the various networks (GSM 900 MHz, DCS 1800 MHz or PCS 1900 MHz)
depending on the roaming arrangements with your operator.
Some services described in this guide may not be available from the network or when roaming, or may require a specific
subscription.
Remember to back up your data and programs frequently, and before sending the mobile phone for repair.
This phone, like any other wireless phone, operates using radio signals and networks. Connection in all locations and
conditions cannot be guaranteed. Therefore you should never rely solely on any wireless phone for essential communications
(for example, medical emergencies).
In some jurisdictions it may be unlawful to take a picture without notice to or the consent of all participants.
WARNING
Depending on the model, network configuration and associated subscription cards, certain functions may not be available.
Your phone is identified by its IMEI number. Write this number down, and do not keep it with your phone, because you may
be asked for it in the event of your phone being stolen, in order to prevent it from being used, even with a different SIM card.
In order to display the IMEI on your phone's screen, type: *#06#.
SAGEM is a trademark of Sagem Mobiles, SAFRAN group.
T9® Text Input is a trademark of ©Tegic Communications Inc.
Java™ and all Java™ based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the
U.S. and other countries.
The WAP navigator and some message softwares (i-mode) are under licence Openwave.
The WAP navigator and the softwares included are the exclusive property of Openwave. For this reason, it is forbidden to
modify, translate, disassemble or even decompile all or part of these softwares.
The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. Bluetooth® QDID (Qualified Design ID):
B012899.
microSD™ is a trade mark of SD Card Association.
Wellphone™ and SmartCom™ are registered trademarks owned by SmartCom SARL France.
Windows is a trademark of Microsoft Corporation.
253015633_LU_FCC_my411C_en.book Page 4 Jeudi, 27. septembre 2007 4:40 16
Contents
Description .................................................. 6
Installing the SIM card and the battery ........... 8
Inserting the memory card .............................. 9
Using the memory card................................... 9
Idle screen ................................................. 10
Quick start ................................................. 11
Information on the SIM card ......................... 11
Getting started .............................................. 11
Switching ON/OFF........................................ 12
Network......................................................... 12
First call ........................................................ 13
Receiving a call............................................. 13
Receiving messages .................................... 22
Messages menu ........................................... 22
Camera ....................................................... 25
Taking and saving a photo ........................... 25
Taking a video .............................................. 27
Multimedia.................................................. 28
Music player............................................... 29
Creating a playlist ......................................... 29
Playing your music ....................................... 30
WAP ............................................................ 31
Using your phone...................................... 14
The WAP Menu ............................................ 31
WAP Logging on........................................... 32
Downloading objects .................................... 32
WAP Logging off........................................... 32
GPRS ........................................................... 32
Phonebook................................................. 16
Games ........................................................ 33
Applications............................................... 34
Improving antenna performance................... 14
Increase the battery life of your phone ......... 14
Charging the battery ..................................... 15
Using the phonebook.................................... 16
Storing a new contact ................................... 16
Calling a contact ........................................... 16
Speed Dialing ............................................... 17
Contact options............................................. 17
Mailing lists ................................................... 19
Messages ................................................... 20
Creating a text message............................... 20
Saving the message ..................................... 21
Sending the message ................................... 21
Alarm ............................................................ 34
Applications .................................................. 34
Timer ............................................................ 34
Calendar ....................................................... 34
Calculator ..................................................... 35
ToDo............................................................. 36
Services........................................................ 36
Contents
253015633_LU_FCC_my411C_en.book Page 5 Jeudi, 27. septembre 2007 4:40 16
Settings ...................................................... 37
Phone............................................................37
Display ..........................................................39
Messaging.....................................................40
Connectivity ..................................................40
Calls ..............................................................43
Networks .......................................................44
Security .........................................................45
Browser.........................................................47
Multimedia.....................................................47
Help...............................................................47
For Customers in the United States ........ 60
Limited Warranty .......................................... 61
For customers outside the United States 64
Warranty ....................................................... 64
End User Licence Agreement (EULA), for
the software ............................................... 67
Java™......................................................... 71
Troubleshooting ........................................ 74
Index........................................................... 76
Technical features..................................... 48
Certification and safety information for the
United States and countries using FCC
standards ................................................... 49
FCC Part 15 statement .................................49
FCC SAR information ...................................50
Safety Information.........................................51
Distance of operation ....................................52
FDA consumer information on wireless
phones ..........................................................52
Driving safety tips..........................................55
Certification and safety information for
Europe and countries using
CE standards ............................................. 56
CE conformance statement ..........................56
CE SAR information......................................57
Safety information .........................................58
Distance of operation ....................................59
CE Environment............................................59
Contents
253015633_LU_FCC_my411C_en.book Page 6 Jeudi, 27. septembre 2007 4:40 16
Description
Red key: Short press: switch on - Long press: switch off
In a call context: Reject a call - hang up
In menus: Return to idle screen.
Green key: Short press: Activate/Deactivate hands-free mode (WARNING: in
this mode do not bring the phone up to your ear (at least 3.9 inches (10 cm)
In call context: Call - receiving a call
Right programmable key: (Function available depending on model)
In idle screen: Access to certain functions (shortcuts)
In menus: Access to the selection shown on screen in the tab (*).
Left programmable key: (Function available depending on model)
In idle screen: Access to certain functions (shortcuts)
In menus: Access to the selection shown on screen in the tab (*).
The navigator allows you:
- to navigate in the various functions pressing the relevant part
- to confirm your selection pressing the central part (OK).
In idle screen, pressing OK displays the main menus icons.
Pressing OK followed by one of the nine keys of the keypad, you can display
a menu directly.
Note: the phone menus being numbered, you can directly access a menu
typing the various numbers.
When composing a message:
Long press: switches from one input mode to another (ABC/T9)
Short press: upper case/lower case/figures
In idle screen: Hold down: Silent mode. In call reception mode: Short press
stops ring tone. In ring tone setting mode: Activate / deactivate ring tone
Stops sound in video or message playing, or in a game
A long press on the key 1 calls voicemail (if the number has been stored in
Settings/Calls/Voicemail menu)
2 to 9 A long press on the keys 2 to 9 gives access to speed dialing.
(*) In this manual, when a function is chosen by pressing on this key, square brackets are used (e.g.: [Save]).
Description
253015633_LU_FCC_my411C_en.book Page 7 Jeudi, 27. septembre 2007 4:40 16
Incoming call:
- Short press: stops the ring
tone.
- Long press: refuses the
call.
When listening to music:
- From the idle screen:
• Short press: access to
Music player (flap open)
• Long press: access to
Music player and start
playing
- From the Music player
menu:
• Short press: play/pause
music
- Short press: Set the
volume
- Long press: Change to
the next or previous
music track
- In standby mode, flap
closed and screen lit
off: a short press lights
on the screen.
Camera lens
Sub-LCD
Charger connector
The sub-LCD displays date and time, battery and network icons and incoming calls.
To ensure optimal screen legibility, check that you have removed the plastic protective film, clean the screen of you
telephone with a soft dry cloth to remove any finger marks or dust and make sure the background brightness is not
too strong.
Description
253015633_LU_FCC_my411C_en.book Page 8 Jeudi, 27. septembre 2007 4:40 16
Installing the SIM card and the battery
WARNING
Depending on the model, network configuration and associated subscription cards, certain functions may not be available.
Your phone is identified by its IMEI number. Write this number down, and do not keep it with your phone, because you may
be asked for it in the event of your phone being stolen, in order to prevent it from being used, even with a different SIM card.
In order to display the IMEI on your phone's screen, type: *#06#.
Ensure that the phone is switched off and the charger disconnected.
1 Turn the phone back and remove the back cover by sliding it downwards.
2 Slide the SIM card into the card holder with fold face down and cut corner as shown in the figure below.
3 Place the battery by positioning first the top of it.
4 Replace the back cover by sliding it.
Description
253015633_LU_FCC_my411C_en.book Page 9 Jeudi, 27. septembre 2007 4:40 16
Inserting the memory card
- Open the protective cover of the slot located on the side of the phone and
insert the memory card pushing it until it clicks into place.
- To remove the card, first make sure that no application is accessing the
card, then slightly push the top edge of the card to release it and pull it out
of the slot.
Using the memory card
The memory card is very fragile. Take care when you insert or remove the memory card.
Some memory cards must be formatted with a PC before first use with the phone.
Description
253015633_LU_FCC_my411C_en.book Page 10 Jeudi, 27. septembre 2007 4:40 16
Idle screen
The idle screen may contain the following information:
1 - The title bar icons:
Battery (if it flashes red, the battery must be charged immediately)
Silent mode (the ringtone is off)
Only emergency call is possible
Signal strength level (between 0 and 5 bars)
Message received (read your message), flashing: memory full (delete some messages)
Grey: GPRS unavailable
Black: GPRS connection
Flashing: GPRS connection on hand
WAP connection
2 - Date and time
3 - Network provider
4 - Thumbnail centred on bottom line:
The main « Menu » thumbnail shows that the menus can be accessed by pressing OK.
Information messages on calls, messages or network messages received may also be displayed. They can be deleted by
pressing
key briefly.
10
Idle screen
253015633_LU_FCC_my411C_en.book Page 11 Jeudi, 27. septembre 2007 4:40 16
Quick start
Information on the SIM card
To use your phone, you need a card called SIM card. It contains personal
information that you can modify:
- Secret codes (PIN(s): Personal Identification Numbers), these codes allow
you to protect access to your SIM card and phone
- Phonebook
- Messages
- How special services work.
WARNING
This card must be handled and stored with care in order not to be damaged. If you should lose your SIM card, contact
your network provider immediately.
Please keep your SIM card out of reach of young children.
Getting started
When you switch on your phone for the first time, follow instructions displayed on the screen.
If access to the SIM card is protected, the device prompts you to enter the PIN number:
Enter the code between 4 and 8 digits given to you when the SIM card was issued. These digits do not appear on the screen
for security reasons.
Enter your PIN code then the date and time and make your choice for the others settings.
Quick start
11
253015633_LU_FCC_my411C_en.book Page 12 Jeudi, 27. septembre 2007 4:40 16
Warning
If a wrong PIN number is entered three times in succession, your SIM card is blocked. You must then:
- Enter the PUK (Personal Unblocking Key) code provided by your operator, and validate.
- Enter your PIN number and validate.
- Enter your PIN number again and validate.
After 5 or 10 failed attempts (depending on the type of SIM card), the SIM card is definitely locked. You must then
contact your operator to obtain a new card.
Switching ON/OFF
When your phone is off, a short press on
will turn it ON.
When the phone is ON, if your are browsing inside the menus, a short press on
you are in the idle screen, a long press on
will switch OFF the phone.
will come back to the idle screen. When
Network
From now on the phone searches for a network on which it can make calls. Once registered onto a network, it displays the
name of the network on the screen. You are then ready to send or receive a call.
If the network’s name appears, calls are possible on your operator's network.
If the letter R and a network name are displayed, calls are possible on a roaming network provider.
If the letter E is displayed without any network name, only the emergency services are accessible (ambulance, police,
fire brigade).
If the network icon flashes, the phone is in permanent search mode. There is no network available. The signal strength
indicator received allows you to display the quality of reception. If it indicates less than three bars, search for better
reception in order to call in good conditions.
12
Quick start
253015633_LU_FCC_my411C_en.book Page 13 Jeudi, 27. septembre 2007 4:40 16
First call
Dial the number you want to ring.
Press
During the call, the call in progress icon flashes on screen and tones may indicate the establishment of the call.
While a call is connecting, the phone icon is flashing.
You can adjust the sound level by pressing the side volume keys.
At the end of the conversation press
to hang up.
International call
Press 0 (hold down) to display « + », then the number of the called party.
Emergency services
Depending on the network you can obtain the emergency service with or without SIM card. It is enough to be in an area
served by a network.
To obtain the international emergency service, dial 112 then press
Receiving a call
When you receive a call, the number of your caller is displayed when it is presented by the network.
Press
to answer, and speak.
To refuse the call, press
To stop the ring tone or the vibrate, without refusing the call, press
Hands-free mode
To change to hands-free mode during a call, make a short press on the green key then press [Yes] to confirm activation
of the amplified mode.
WARNING: in this mode do not bring the phone up to your ear.
All the numbers corresponding to incoming and outgoing calls are logged in the list of recent calls.
When on a call, pressing [Options] allows you to have access to different functions.
Pressing [Mute ON] allows you to switch off the microphone temporarily when you wish to mute your audio.
Quick start
13
253015633_LU_FCC_my411C_en.book Page 14 Jeudi, 27. septembre 2007 4:40 16
Using your phone
Improving antenna performance
The antenna is integrated in your phone, under the lower part of the back cover.
Avoid putting your fingers on this area when the phone is switched ON.
If your fingers obstruct the antenna, the phone may have to operate with a higher
power level than usual; decreasing its efficiency quickly. It could also affect the
quality of your communications.
Increase the battery life of your phone
- Don't press the keys when not necessary: each keypress activates the backlight, and uses much power.
- Don't obstruct the antenna with your fingers.
- Activation of Bluetooth® function reduces the phone battery life. We advise you to deactivate it when not in use.
14
Using your phone
253015633_LU_FCC_my411C_en.book Page 15 Jeudi, 27. septembre 2007 4:40 16
Charging the battery
Your phone is powered by a rechargeable battery. A new battery must be
charged for 4 hours at least before being used for the first time. It reaches its
optimum capacity after a few cycles of use.
When your battery has been discharged, the empty battery icon flashes. In this
case recharge your battery for at least 15 minutes before making any calls in
order not to be cut off quickly.
To recharge the battery:
Connect the charger to a socket.
Plug the end of the cable into the side connector of the phone.
The phone is then charging up. The battery icon scrolls up and down to indicate
that it is charging. When the battery is fully charged, the charging stops on its
own. Disconnect the cable.
When charging, the battery may warm up, this is normal.
WARNING
If the battery has entirely discharged, the phone cannot start. Plug the phone to the charger. The phone will switch on
after a few minutes of charge. You can use the phone again when the Start option is displayed on the screen.
WARNING
There is danger of explosion if the battery is placed in an incorrectly way or if it is exposed to fire.
Do not short circuit it.
The battery does not have any part that you can change.
Do not try to open the battery casing.
Use only the appropriate chargers and batteries as shown in the phone manufacturer's catalogue.
The use of other types of chargers or batteries may be dangerous or invalidate the warranty.
Used batteries must be disposed of in the appropriate places.
We advise you to take the battery out if you plan not to use the phone for extended periods.
You are strongly advised not to connect your phone to the charger if it doesn’t contain a battery.
The charger is a safety step-down transformer, it is forbidden to modify, alter or replace it by another component (power
supply plug, etc).
Using your phone
15
253015633_LU_FCC_my411C_en.book Page 16 Jeudi, 27. septembre 2007 4:40 16
Phonebook
Using the phonebook
Enter the Phonebook menu, the contacts list is displayed if you already get some (otherwise, go to Storing a new contact).
When a contact is selected, an icon is displayed in the title bar:
contact stored in the SIM card
contact stored in the phone
contact stored in the Fixed Dialling. See PIN2 number and Fixed dialling in Security Menu for more details about this
activation.
You can search for a contact quiclky by typing the first letters (up to three). You can display it by pressing OK.
Storing a new contact
There are two options to store a contact :
1) select [Options], then select Add phone contact or Add SIM contact, or
2) enter in Add contact pressing OK, then select Telephone, SIM card or Fixed directory.
- Enter the last name and press the navigator (OK).
- Enter the number and press the navigator (OK).
Note: you can fill other fields if you store the contact in the phone memory (email, address, ringtone, photo, etc.).
- Press [Save] to store it.
Calling a contact
Several ways:
to start the call.
- Select a contact. Press
- Select a contact, press OK, his number is displayed, press [Call] to start the call.
- Direct call from the idle screen (only for the contacts stored in the SIM card memory): type the number with which the
contact was saved then
(example : 21
) or the number then
, the number is displayed, confirm.
16
Phonebook
253015633_LU_FCC_my411C_en.book Page 17 Jeudi, 27. septembre 2007 4:40 16
Speed Dialing
You can assign a short number to a contact (from 2 to 9).
- From the idle screen, make a long press on the short number selected.
- The Speed Dialing function is displayed.
- Enter the phone number of your contact or press the [Contacts] key to select a contact already saved.
- Press [OK] to confirm.
Contact options
To display the various options, select a contact and press [Options].
Modify contact
Modify what you want and validate then select Save once the modifications completed.
Send message
To send a message to a contact (see chapter Messages).
Send by message
To send a contact details by message (see chapter Messages).
Send by Bluetooth®
To send the details of one, several or all the contacts by Bluetooth®.
Add Speed-Dialing
You can assign one of the numbers proposed to the contact selected (see Speed Dialing).
Copy to SIM / Copy to mobile
This allows you to copy your phonebook contacts from one memory to the other. Only the name and the first phone number
will be copied.
Phonebook
17
253015633_LU_FCC_my411C_en.book Page 18 Jeudi, 27. septembre 2007 4:40 16
Export
It allows you to copy one or several contact details to the Multimedia/My Contacts directory.
Several options:
- current: the details of the contact selected are copied,
- multiple: the details of the contacts you select are copied,
- all: the details of all the contacts are copied.
My numbers
You can create the entries corresponding to your own numbers in order to consult them when necessary.
Select My numbers and validate. Enter the different details and validate.
Memory
Select SIM or Telephone and validate.
- Telephone: the screen displays the amount of memory used. The memory capacity is shared between the phonebook and
various other features. If you lack memory, check if you can free some space.
- SIM: available memory only for contacts.
Delete
It allows you to delete the contact(s) selected or all the contacts.
Set as my card/Business card
The details of a contact stored in the phone memory can be saved in a business card.
- Select a contact and press [Options].
- Select Set as my card and [OK]. The details are saved as Business card. Then you can read it, modify it or send it by
message or Bluetooth®.
Copie SIM -> phone/Copy phone -> SIM
This allows you to copy all the SIM card contacts to the phone memory and vice versa.
18
Phonebook
253015633_LU_FCC_my411C_en.book Page 19 Jeudi, 27. septembre 2007 4:40 16
Synchronize
You can synchronize your phonebook with your archives stored in your operator's network depending on the options offered
by your operator with a GSM or GPRS connection from your phone.
You can also synchronize your phonebook with your archives stored in your computer. You have only to activate Bluetooth®
or configure your USB connection in your phone (see chapter Connectivity).
Add to mailing list
This allows you to add a contact to a mailing list.
Settings
- List choice: This menu allows you to select the default phonebook (SIM, Phone, SIM and Phone) displayed when the
phone switches on.
- Sorting: This menu allows you to select the way to sort contacts in the phonebook (by name or first name).
Mailing lists
A mailing list allows you to group contacts: this list can be used to send messages easily to all the list contacts (only contacts
stored in the phone memory).
- In the phonebook, select the Mailing Lists tab pressing the navigator rightwards.
- Press [Options].
- Select Add mailing list.
- Enter a name and press OK.
- Then, on a list press [Options]. Select Add contact each time you want to add a contact in the list.
Phonebook
19
253015633_LU_FCC_my411C_en.book Page 20 Jeudi, 27. septembre 2007 4:40 16
Messages
From this menu, you are able to send SMS and MMS. MMS is a Multimedia Message Service, which allows you to enclose
photos, audio files, and others rich contents to your messages; these messages can even be composed of several slides.
MMS are differently charged to SMS are. Please contact your network provider to get more information on their cost and the
service availability.
Creating a text message
- Select Messages/Create Message.
- Type your text. The T9 mode is applied by default.
The language used is the one selected on the display of the phone (if the language selected is not compatible with the Easy
Message T9®, the English language will be automatically selected).
The Easy Message T9® mode helps you to easily write your messages.
When the text has been entered, [Options] is used to access the functions offered:
- Add recipient: to send the message by entering the recipient's number or selecting it in the phonebook.
- Add Pictures/Sounds/Videos/Calendar/Visit cards: to insert various objects into your message.
- Add Subject: allows you to precise a subject to your message.
- New word: to create your personal dictionary.
- Preview: to display a preview of the message once composed.
- Slide duration: allows you to select a duration to make the text scroll automatically before sending the message.
- Symbols: to insert accented characters, special characters or punctuation.
- Input mode: ABC mode/123 mode (see page 21), T9 mode (see page 21) and languages.
- Message type: to select the message type (SMS or MMS).
- Send Options (see page 23).
- Activate/Deactivate Zoom is used to modify size of characters.
- Cancel is used to delete all text entered and quit.
- Save: to save a draft in memory.
- Save as Template: allows you to keep as a template a message in order to use it again.
20
Messages
253015633_LU_FCC_my411C_en.book Page 21 Jeudi, 27. septembre 2007 4:40 16
Using T9 Mode
Press once the key corresponding to the letter chosen and compose the word by continuing to press the
keys corresponding to the various letters without paying attention to the display: the word is highlighted.
The same sequence of keys pressed can correspond to several words, existing on the dictionary. If the word
that appears is not the word you expected, press the navigator upwards to scroll through the words
corresponding to this key sequence.
Once you agree on the word proposed on the screen, press the navigator rightwards to validate it or on the 0 key (which
validates and inserts a space after the word), and go on writing the next word.
If the word you are expected is not proposed, please add characters until you get the message Add a word? Press Yes and
validate if the word displayed suits you or modify this word before adding it in the dictionary.
If you do not want to use T9 mode, you can switch to ABC mode pressing
(long press). The ABC mode allows you to
type letters: press on one key several times to make the letter wanted appear (for example: press twice the 2 key to display B).
Upper case/Lower case/Figures
A short press on
switches the text to upper case, lower case or figures.
Punctuation characters
Punctuation characters are obtained by pressing the 1 key (except in 123 mode), or with the help of Insert mode (fast access
by briefly pressing
).
Accented characters
Accented characters are generated automatically in T9 mode.
In ABC mode accented characters are available by pressing the key supporting the non-accented character repeatedly.
Saving the message
- Select Save if you do not want to send the message immediately or if you want to send it several times. It is saved in the
Drafts menu.
or
- Select Save as template to use it again as a template. It is saved in the Templates menu.
Sending the message
- Once the text entered, press the navigator or press [Options] and select Add recipient.
- Enter the receiver’s number or take it in your phonebook pressing [Options] then selecting Contacts.
You alson can select a contacts list in your phonebook.
Messages
21
253015633_LU_FCC_my411C_en.book Page 22 Jeudi, 27. septembre 2007 4:40 16
Receiving messages
When you receive a message, the phone plays the ring tone that you selected, and a message icon comes on the screen of
your phone.
If you do not read the messages, this icon remains displayed on the screen. When it flashes, the memory is full.
Receiving icons, backgrounds or tunes can take several seconds. An icon is flashing when the download of your message is
in progress.
Note that you have two different possibilities for receiving MMS: automatically or manually; if « manual mode » is activated,
then you will receive only a notification in your Inbox, meaning that a MMS is available on the MMS Server; select Retrieve
in the options when you want to retrieve the MMS from the network.
For more details about automatic and retrieval modes, see Options on page 23.
Messages menu
Inbox
Messages are listed in chronological order, the latest one being displayed first.
The quantity of Not Read and Not Retrieved messages is shown. Not Retrieved and Not Read messages are shown in bold.
Drafts
When you store a composed message, it is stored among the drafts.
Select a message and press [Options]. The options are: Read, Details, Delete, Modify.
If you select a message and press OK, you can modify it.
If you want to send it, select Modify then press [Options] and select Add recipient.
Sentbox
The Sentbox menu is used to store all your sent messages if you activated the option Store sent messages in the Options
menu (see page 23).
Too many messages saved will quickly fill up the available memory and no further messages will be received.
For each message, its characteristics (shown with an icon) and the time (or date) of sending are displayed on the screen.
Select a message and press OK.
Choose one of the options given: Read, Modify, Forward, Delete, Delete all.
22
Messages
253015633_LU_FCC_my411C_en.book Page 23 Jeudi, 27. septembre 2007 4:40 16
Outbox
This menu displays the messages that have not been sent. You can therefore send them again.
Call Voice Mail
This function allows you to call your voicemail.
This number depends on the operator.
Templates
When composing a message, if you selected the Save as template option, the template is saved in this menu.
The same options as for the drafts are available for the templates.
Options
Choose one of the options given: MMS, SMS or voicemail.
- The MMS options are:
• Store sent messages: it is highly recommended that you keep this function deactivated, in order to avoid a full memory.
• Retrieval mode: if you are in a poor coverage area, it may be more convenient to choose the manual retrieval mode
which gives you the retrieve later option.
• Priority: selection of a priority to send a message.
• Request delivery report: request of a delivery report when sending a message.
• Period of validity: during that period, the network provider will try to send the message.
Advanced settings
• Send delivery report: sending a delivery report when receiving a message.
• MMS ignore: if you want to deactivate the reception of any MMS in your phone.
• MMS server: to select another MMS provider, or set the parameters of a new MMS provider.
• Display Bcc: if you want to activate/deactivate this display.
• Sender visibility: you choose to display or not your phone number on the receiver’s phone screen, with that message.
• Maximum size: if you want to activate/deactivate the option of maximum size supported for the MMS.
- The SMS sending options are: store sent messages, acknowledgment, period of validity (during that period, the network
provider will try to send the message), message format, message centre number.
- Voicemail: allows you to record your voicemail access number.
Messages
23
253015633_LU_FCC_my411C_en.book Page 24 Jeudi, 27. septembre 2007 4:40 16
Local info.
This menu is used to activate reception of information broadcast by the network.
You can choose whether you want to receive this information or not (please contact your network provider).
Mailing list
This menu displays the mailing lists created in the phonebook.
To display the different options, press [Options].
- Add mailing list: allows you to create a new mailing list.
- Modify name: allows you to modify the mailing list name.
- Add contact: allows you to add a contact to the mailing list.
- Properties: allows you to see the type of mailing list and the number of contacts.
- Delete: allows you to delete the mailing list.
Memory
You may know the memory available for saving messages.
Choose one of the options given: SMS or MMS.
The SMS screen displays the memory available either on the SIM card or on the phone.
The MMS screen displays how much memory is used in Kbytes.
24
Messages
253015633_LU_FCC_my411C_en.book Page 25 Jeudi, 27. septembre 2007 4:40 16
Camera
This menu allows you to take photos and videos and use them for different purposes. For instance, you can send them to
another phone or an Internet address, store them, use them as wallpapers or screen savers.
Taking and saving a photo
Select the Camera menu. The camera is now on. Look into your phone display and position your subject. Move your phone
to position your photo.
The three text lines on the left of the screen indicate:
- the number of photos that you can take with the photo and the format quality selected,
- the current format selected (Photo format option below),
- the current quality selected (Photo quality option below).
Settings before taking a photo
Zoom:
To activate zoom, use the navigator upwards or downwards.
Note: if the zoom selected does not match with the storing format, the photo is automatically saved in an appropriate format
Other settings (pressing [Options]):
- Activate timer: to take a photo with a 5, 10 or 15 second time delay.
- Effects: to select an effect.
- Exposure: to select luminosity.
- Save new pictures: used to select the location where the photo will be saved (phone or memory card).
- Click sound: to select the sound you will hear when taking a photo.
- Photo quality: to select the photo quality.
- Photo format: to select the resolution in which your photo will be saved.
- Go to video: to take a video.
Camera
25
253015633_LU_FCC_my411C_en.book Page 26 Jeudi, 27. septembre 2007 4:40 16
Taking a photo
- Press OK, the photo is taken and stays on the phone display.
Warning: if you press [Back], you will go back to the previous screen and lose the photo you have just taken.
- Press OK if you want to send the photo immediately by MMS.
- Press Save to save your photo, a progress bar animates then different options are displayed:
• Send by: allows you to send the photo by MMS.
• Send by Bluetooth: allows you to send the photo by Bluetooth®.
• New…: allows you to take a new photo.
• Editor: various options to modify a photo.
Zoom: allows you to magnify certain parts of your photo.
Adjustment: allows you to improve contrast.
Emboss: allows you to modify a photo with an embossed grey tint.
Negative: allows you to change a photo into negative.
Grey Scale: allows you to change color into black and white.
Contrast: allows you to increase or decrease the contrast of your photo.
Sharpen: allows you to sharpen a photo.
Blur: allows you to add blur to a photo.
Sepia: allows you to change colors into sepia.
Shape: allows you to shape a photo.
Brightness: allows you to increase or decrease the brightness of a photo.
Solarize: allows you to increase or decrease the solarize of a photo.
Saturation: allows you to increase or decrease the color saturation.
• Rename: allows you to modify the name of a photo.
• Add to contact: allows you to assign a photo to a contact saved in the phonebook.
• Use as: allows you to select the photo as a wallpaper or screensaver.
Note: using the camera during a call may disturb the call quality.
26
Camera
253015633_LU_FCC_my411C_en.book Page 27 Jeudi, 27. septembre 2007 4:40 16
Taking a video
- Select the Camera menu then X to switch into video mode.
- If necessary, select the following settings pressing [Options]:
• Video sound: allows you to record whether not the sound when recording a video.
• Size restriction: allows you to choose a video size.
• Save new videos to...: allows you to select where the video is saved (phone or memory card).
• Go to Camera: to take a photo.
- Press OK to record then press [Stop] when you want to stop recording.
Note: the phone automatically stops recording when the maximum size available is reached.
- Press [Options] to display the options:
• Record a video: allows you to record a new video.
• Playback: allows you to play the video.
• Send by message: allows you to send the video by MMS.
• Send by Bluetooth: allows you to send the video by Bluetooth®.
• Rename: allows you to modify the name of a video.
• Delete: allows you to delete a video.
Note: the videos are saved in the phone with a .3gp format.
Camera
27
253015633_LU_FCC_my411C_en.book Page 28 Jeudi, 27. septembre 2007 4:40 16
Multimedia
The Multimedia menu contains the directories of all the multimedia objects recorded in your phone and the downloaded
objects (photos, videos, ringtones, musics, etc.).
There are two tabs that you can select pressing the navigator rightwards or leftwards:
- Phone tab (phone memory)
- MicroSD™ tab (available if you have inserted a memory card in your phone).
You can copy the multimedia objects from the card to your phone.
To display the various options of each directory, press [Options].
- Browse: displays the list of the objects.
- Rename: modifies the directory name.
- Delete: deletes the directory (only the directories created by the user).
- New folder: create a new directory.
- New: allows you to take a new photo or video or to record a sound.
- Format: this option deletes all the internal memory of the phone. Warning: all the multimedia objects saved in this memory
will be deleted.
- Memory: displays the memory used and available for the multimedia objects.
For each object a list of options is available (view, send, delete, etc.).
The My Contacts directory appears if you have exported contact details from your phonebook (see chapter Phonebook).
The My Calendar directory appears if you have exported a ToDo (see chapter Applications).
28
Multimedia
253015633_LU_FCC_my411C_en.book Page 29 Jeudi, 27. septembre 2007 4:40 16
Music player
From the idle screen:
- Short press: access to Music player (flap open)
- Long press: access to Music player and start
playing
From the Music player menu:
- Short press: play/pause music
- Short press: Set the volume
- Long press: Change to the next or previous
music track
This menu allows you to listen to music similar to a portable music player.
If you do not have any music stored in the memory, use WAP to download some or connect your phone to a PC (see chapter
Multimedia). Two tabs are displayed: Player and Library. Select Library pressing the navigator rightwards. The directory of
the music contained in the phone and in the memory card (if it is present) is displayed.
Select [Options]: you can play all the music directly or manage them in lists.
Creating a playlist
There are two options to create a playlist:
1) Select [Options] in the Library tab.
• Select Create playlist.
• Type a name for your playlist and press OK.
• The list of the music is displayed in two tabs: those contained in the phone memory or pressing the navigator rightwards
those contained in the memory card.
• Select the music you want in your playlist and press OK to add the music to the playlist ; do it again if you want add
others.
When pressing [Options] on a playlist, you can display or play the contents, add music, create a new playlist, delete one
or modify its name.
Music player
29
253015633_LU_FCC_my411C_en.book Page 30 Jeudi, 27. septembre 2007 4:40 16
2) Select [Options] in the Player tab.
• Select Save list.
• Choose between either creating a new playlist or replacing the contents of a playlist already created.
Playing your music
Player tab: This tab opens as soon as a music or a list of music, has been selected to be played.
To display the different options, press [Options]:
- Play: to play musics of the playlist.
- Remove from list: allows you to remove the music selected or all the music from the list.
- Play options: to play the musics one by one, in a continuous way or in a random way.
- Repeat options: to choose whether or not to replay a list.
- Save list: save the current playlist as a new playlist.
- Send by Bluetooth: to send the music by message or Bluetooth®.
- Rename: to rename the music.
- Memory: allows you to display the memory used for musics and the available memory for the multimedia objects.
- Details: properties of the music selected.
30
Music player
253015633_LU_FCC_my411C_en.book Page 31 Jeudi, 27. septembre 2007 4:40 16
WAP
WAP (Wireless Application Protocol): a protocol that translates the Internet language into WML and HTML
languages that can be read by a phone. The WAP function allows you to log onto certain Internet sites. You can log onto sites
that allow you to download ringtones, icons, animated screensavers, Java™ applications, videos to your phone.
The WAP Menu
The WAP navigator is under licence:
The WAP navigator and the softwares
included are the exclusive property of
Openwave. For this reason, it is
forbidden to modify, translate,
disassemble or even decompile all or
part of these softwares.
WAP
WAP logs onto the home page (carries the name of your access provider).
Go to URL: this menu allows you to input an Internet address directly.
Bookmarks: allows to store bookmarks (addresses of Internet sites).
A bookmark stored in the list can be modified, sent or deleted.
You can receive bookmarks and add them to this list.
Saved pages: allows to display the pages saved on Internet sites out of connection
(Warning: these pages will not be updated).
History: backward and forward navigation of the pages displayed are kept in
memory.
Browser settings:
- Profiles: allows you to select or modify your provider’s configuration settings or
to configure others providers’settings.
- Connection time out: is used to choose the time after which the call is
automatically disconnected if you have forgotten to log off from a service.
- WAP PUSH SI: this menu allows you to activate or deactivate a message
reception including a link which forwards to another page (advertising for
instance).
Note: see chapter Idle screen for information on @ and GPRS icons.
31
253015633_LU_FCC_my411C_en.book Page 32 Jeudi, 27. septembre 2007 4:40 16
WAP Logging on
The connection to a WAP service on the GPRS network is not cut if an incoming call is received. You can answer the call.
If you are logging onto the GSM or GPRS network, the @ symbol flashes, the metering of the cost of the call starts as soon
as it stops flashing.
Downloading objects
Some WAP sites allow you to download ringtones, icons, animated screensavers, games or JAVA™ applications. Once
downloaded, they are stored in your phone's memory. You can then save them in your phone (same operation as used for
downloading using messages).
WAP Logging off
To log off, press
. The logoff happens automatically after a few seconds of inactivity if you forget to log off. This period is
defined by the linger time setting.
GPRS
A flashing icon indicates that the phone is logging onto a GPRS network.
A non-flashing icon indicates that the GPRS network is available; if the icon is dark, it indicates that the phone is logged onto
the GPRS network.
This icon is not displayed if the GPRS network is not available or if the SIM card inserted in your phone does not include the
GPRS service. It may also disappear when accessing WAP services if the connection uses the GSM network instead of the
GPRS network.
32
WAP
253015633_LU_FCC_my411C_en.book Page 33 Jeudi, 27. septembre 2007 4:40 16
Games
Your phone contains one or several games, depending on model. You can
download more. You are the owner of a SAGEM mobile phone which gives you
the ability to download applications and games to be executed on your phone
thanks to the built-in Java™ engine.
However, receiving applications from everywhere implies some basic knowledge
of the possible effects of such download.
We advise you to download certified games or applications from your operator
sites or from www.planetsagem.com.
By default, the connection URL of your operator or of PlanetSagem is configured
in your phone.
If no connection URL is configured, by selecting the More Games menu, you
display the WAP function to configure new profiles which allow you to download
games or applications.
When you select a game or an application, the Settings/Connection menu
(displayed with [Select] key) allows you to configure a profile which only be used
by the game or application to connect to the network (to exchange scores for
example) but is not used to download new games or applications.
Games
33
253015633_LU_FCC_my411C_en.book Page 34 Jeudi, 27. septembre 2007 4:40 16
Applications
Alarm
This menu allows you to set and activate the alarm.
The alarm works even when the phone is switched off.
The alarm icon appears on the idle screen.
Applications
(see chapter Games).
Timer
This menu is used to set and activate the timer.
The alarm icon appears on the idle screen.
Calendar
Calendar menu
This menu gives you access to your diary and get to a day, week, month or specific date. It lets you add events, access the
global actions for all the events and manage them by event category.
- Add Written Event/Add Vocal Event: allows you to add events of the text or voice type. Fill in the different items. Save
the event.
- Delete: allows you to schedule the deletion of events that took place more than one day, week or month ago.
- Memory: allows you to display the memory capacity used by the different functions of your phone and in particular the
diary.
- Delete all: allows you to delete all the events from your diary.
- Categories: allows you to see the different event categories, assign a specific ring tone to each individual category, know
the number of events in each category and see them.
- Synchronize: you can synchronize your organizer with your archives stored in your operator's network depending on the
options offered by your operator with a GSM or GPRS connection from your phone.
You can also synchronize your organizer with your archives stored in your computer. You have only to activate Bluetooth®
or configure your USB connection in your phone (see chapter Connectivity).
34
Applications
253015633_LU_FCC_my411C_en.book Page 35 Jeudi, 27. septembre 2007 4:40 16
The other menus are:
- See month: allows you to access events on a month-by-month basis.
- See week: allows you to access events on a week-by-week basis.
- See today: allows you to access the events for the current day.
- See date: allows you to access events at a specific date.
Calculator
This menu allows you to use your phone as a calculator.
Use the following keys to make calculations:
- Upwards: Add, downwards: Subtract, rightwards: Multiply, lefwards: Divide
The following keys are used for:
: Equals or convert
: Delete
: Decimal point.
If no calculations are being run, pressing [Convert] allows you to use the value in the converter directly.
Converter
This option allows you to convert one currency to another.
Enter a value and press the navigator upwards to convert from one currency to another, or downwards to convert back.
Pressing [Options] allows you to use the following options:
Rapid exchange
If you select Activate, the converter will work in the idle screen by entering the desired numbers and pressing the navigator
upwards or downwards to convert.
Exchange rate
Enter the exchange rate corresponding to the chosen currency.
Currency
Enter the two types of currency to be converted.
Goto Calculator
This option allows you to use immediately the value converted in the calculator.
Applications
35
253015633_LU_FCC_my411C_en.book Page 36 Jeudi, 27. septembre 2007 4:40 16
ToDo
This menu allows you to add ToDo’s, access category-based Todo management and delete all the ToDo’s.
If there are not any ToDo, you directly access to the options below.
- Add written ToDo/Add vocal ToDo: allows you to add ToDo of the text or voice type. Fill in the different items. Save the
ToDo.
- Categories: allows you to see the different ToDo categories, assign a specific ring tone to each individual ToDo, know the
number of ToDo’s in each category and see them.
- Memory: allows you to display the memory used by the different functions of your phone and in particular the ToDo.
- Synchronize: you can synchronize a task with your archives stored in your operator's network depending on the options
offered by your operator with a GSM or GPRS connection from your phone.
You can also synchronize a task with your archives stored in your computer. You have only to activate Bluetooth® or
configure your USB connection in your phone (see chapter Connectivity).
ToDo actions menu
This menu allows you to do all the actions possible on any ToDo. To display a ToDo, select it in the list and press OK.
To display the different options, press [Options].
- Modify ToDo: allows you to modify the ToDo properties.
- Delete: allows you to delete the ToDo.
- Send by message: allows you to send the ToDo by MMS.
- Send by Bluetooth: allows you to send the ToDo by Bluetooth®.
- Export: it allows you to copy the event to the Multimedia/My Calendar directory.
- Delete all: allows you to delete all the ToDo’s from your ToDo.
Services
This item may not be present on your phone’s menu, as its contents depends on your SIM.
36
Applications
253015633_LU_FCC_my411C_en.book Page 37 Jeudi, 27. septembre 2007 4:40 16
Settings
Phone
Silent mode
This menu allows you to switch to Silent mode.
Silent mode can also be accessed via the idle screen by holding down the
key.
When the phone is in silent mode, this relevant icon appears on the idle screen.
In this mode, the ring tone will not function, except for the alarm clock.
Note: if you have activated the silent mode, it does not remain after switching off your phone.
Ring tones
This menu allows you to allocate a ring tone to different functions (call receiving, message receiving, alarm).
Vibrate
This menu allows you to activate the vibrate mode for calls.
Languages
This menu allows you to choose your phone's display language.
Select your language and validate.
If you select Automatic, the language used will be the one relative to your SIM card.
Beeps
This menu allows you to activate a beep for the battery, the keypad or the network.
Settings
37
253015633_LU_FCC_my411C_en.book Page 38 Jeudi, 27. septembre 2007 4:40 16
Date / Time
Set Date/Time
This menu allows you to set the date and time of your phone.
Automatic update
This menu allows you to choose manual or automatic updating of date and time (after switch off of your phone or when going
abroad for instance).
Please select Automatic, Manual or On demand and press [Select].
WARNING: this service depends on your operator and on the information broadcasted on its network. Please contact it to
know how it operates.
Display
This menu allows you to select the date and time display.
In the list that appears, select the desired display type between: Main LCD or Sub LCD.
Time zone
This menu allows you to change time in relation to the GMT time.
Choose the time of the country desired by calculating the time from the GMT time.
Daylight savings
This menu allows you to set your phone to the summer/winter time.
Select 1 h, 2 h Summer time or Winter time depending on the season, and validate.
Shortcuts
This menu allows you to assign some functions to the programmable keys and to the directional keys of the navigator.
It can also assign a short number to a contact (see the Speed Dialing function on page 17).
Active flip
If you select Activate, calls are answered by opening the flap.
Note: closing the flap always hangs up, whatever the selection made in this menu (Activate or Deactivate).
38
Settings
253015633_LU_FCC_my411C_en.book Page 39 Jeudi, 27. septembre 2007 4:40 16
Display
This menu allows you to customize your screen by choosing a different presentation.
Wallpaper
This menu allows you to select a background picture.
You can select wallpapers through the phone default wallpapers and the pictures downloaded (Multimedia), several
wallpapers in a random way (Random).
You can also select the connection link Download more to download pictures.
When the directory Multimedia/My Pictures is displayed on the screen, on the picture name:
- Press [Select] to validate your wallpaper selection, or
- Press OK: the picture is displayed. Press [Select] to select it as your phone wallpaper or press the navigator upwards or
downwards to display others.
Skins
This menu allows you to select the background picture when displaying menus.
Operator logo
This menu allows you to display your operator's logo on the idle screen (depending on model).
Screensaver
This menu allows you to display an animation when the phone is in standby mode.
You can select screensavers through the phone default screensavers and the pictures downloaded (Multimedia), several
screensavers in a random way (Slide show).
You can also select the connection link Download more to download pictures.
When the directory Multimedia/My Pictures is displayed on the screen, on the picture name:
- Press [Select] to validate your screensaver selection.
or
- Press OK: the picture is displayed. Press [Select] to select it as your phone screensaver or press the navigator upwards
or downwards to display others.
Settings
39
253015633_LU_FCC_my411C_en.book Page 40 Jeudi, 27. septembre 2007 4:40 16
Energy saving
Backlight
- Screen only: only the screen is lit up.
- Full backlight: both the screen and the keypad are lit up.
Note: in any case, after a certain time of inactivity, the backlight will be automatically turned off to save battery life.
Contacts
This menu allows you to select the way to sort contacts in the phonebook (by name or first name) and the filter applied on the
contacts list display (SIM contacts, phone memory or both).
Contrast
This menu is used to adjust screen contrast.
Adjust the contrast using the navigator.
Messaging
This menu allows you to set SMS or MMS sending options and to enter the voicemail number (see chapter
Messages/Options, page 23).
Connectivity
You can exchange with other devices (PC, mobile phones, personal assistants, printers, etc.) various data: pictures, sounds,
photos, videos, To Do tasks, organiser events, contacts, etc.
Data exchange can be done through:
- a USB cable,
- a Bluetooth® connection.
Bluetooth®
Bluetooth® is a technology used to establish a wireless connection with other Bluetooth® equipped devices: for example, with
a pedestrian kit or a car kit to phone or with a PC to swap data. The range is about 10 m.
The Bluetooth® menu contains the following entries:
40
Settings
253015633_LU_FCC_my411C_en.book Page 41 Jeudi, 27. septembre 2007 4:40 16
Paired devices
This menu lets you draw up the list of devices with which the Bluetooth® connection is secure (by authentication and
encryption).
A device must be added to this list before it can be used in Bluetooth® with your phone except for exchanging objects. When
you select send by Bluetooth® (photo, Todo task, contact details, etc.) the phone displays the list of devices. You do not need
to select a device from this list at this time, you can start a one-off search for a device when you initiate sending.
See below for the pairing procedure.
Mode
With this menu you can, on the one hand, activate and deactivate the Bluetooth® function and, on the other, when the
Bluetooth® function is activated, select whether you want other Bluetooth® devices to be able to detect your device.
- On & hidden: your phone is not visible. It cannot be detected by other Bluetooth® devices. In this mode, a device can only
connect to your phone using Bluetooth® if you have already paired it. This mode lets you detect other devices and pair with
them from your phone.
- On & visible: your phone is visible for a period of 3 minutes. During this period, it can be detected by the other Bluetooth®
devices. Select this mode when a pairing with your phone has been initiated from another Bluetooth® device.
- On & always: your phone is visible and can be detected by the other Bluetooth® devices as long as this mode is selected.
- Off: the Bluetooth® function is not available.
IMPORTANT:
- The Off option ensures the best battery life for your phone.
- Bluetooth® security is better guarded because your phone remains invisible to the other devices.
My Bluetooth® name
This is the name used to identify your phone when it is detected by another Bluetooth® device.
Pairing procedure
Select Paired devices/New Device.
If the Bluetooth® function is not active, the phone prompts you to activate it using one of the 3 modes described above.
The phone searches for visible Bluetooth® devices and displays the list. Select the device concerned and validate your
choice. Your phone then prompts you to enter a code which must be the same as the code entered on the remote device.
Enter and validate this code: Your phone is now paired with the remote device.
A connected device is shown in blue in the list.
Settings
41
253015633_LU_FCC_my411C_en.book Page 42 Jeudi, 27. septembre 2007 4:40 16
[Options] on the name of a device lets you access the following options:
- Delete: this is used to delete the device. WARNING: using this function needs starting the pairing over again.
- Rename: this is used to modify the name of the device.
- Delete all: this is used to delete all your devices. WARNING: using this function needs starting the pairing over again.
- Activate: this is used to activate the connection with the device.
- Deactivate: this is used to deactivate the connection with the device.
- Properties: this is used to display the list of the device's Bluetooth® services.
Notes:
- Refer to the user manual of the device with which you are pairing to find out how to set this device to the mode allowing
this operation.
- The code of the remote device may be predefined by the device manufacturer. In this case, refer to the user manual of this
device to find out this code.
Car kit/Headset
This menu allows you to activate or deactivate the Automatic response option when the phone is connected to a pedestrian
kit or a car kit.
SyncML
Two selections:
- Network (OTA): you can synchronize your phonebook, your organizer or your ToDos with your archives stored in your
operator's network depending on the options offered by your operator with a GSM or GPRS connection from your phone.
- Local: you can synchronize your phonebook, your organizer or your ToDos with your archives stored in your computer.
Use the Wellphone software and configure your USB connection in your phone or activate Bluetooth®.
USB Mode
This menu allows you to select a mode to connect the phone to a PC with a USB cable available as an accessory.
At plugging-in
If you select this option, when connecting a USB cable, the phone asks you to select the mode you want.
Modem
This mode is a communication mode between the phone and a PC. It allows you to exchange data (visit cards, contacts)
between the phone and a PC.
After connection of the USB cable between the phone and the PC, you must use the MPAS software (My Pictures And Sounds
available on www.planetsagem.com) or the Wellphone software (available on www.wellphone.com).
42
Settings
253015633_LU_FCC_my411C_en.book Page 43 Jeudi, 27. septembre 2007 4:40 16
USB key
This mode allows you to exchange data between a PC and the phone memory (pictures, sounds and videos’ memory) or the
memory card.
After connection of the USB cable between the phone and the PC, the phone memory and the memory card are displayed
as additional memories in the Windows explorer files directory.
Note: If a call comes in during an exchange of data with your PC, the link will be interrupted and will have to be manually
re-started.
Notes when the phone is connected to a personal computer in USB key mode:
- The memory card is not detected by the phone. Consequently, if you have configured your phone with a wallpaper or a
ring tone stored in the memory card, those ones will not be used during the connections.
- Camera is not available, neither in photo mode, nor in video mode.
Calls
The Calls menu allows you to manage all the calls functions (call forward, displaying numbers, call waiting, voicemail number,
etc.).
Call divert
Depending on your subscription, this service allows you to forward incoming calls to a different number or to the voice mailbox.
Choose the type of forwarding you want from the options available.
Counters
This menu allows you to consult the duration of the up calls.
It can also be used to check the volume of data exchanged in GPRS.
Display number
This menu allows you to modify the status of the display number function.
Select one of the options given: Anonymous mode, My number, Callers’ number, On sub-LCD.
Anonymous mode
You have the ability to mask your number on the phone of the person you are calling.
- Preset: network default mode.
- No: you choose not to activate anonymous mode and then to display your number.
- Yes: you choose to active anonymous mode and then not to display your number.
Settings
43
253015633_LU_FCC_my411C_en.book Page 44 Jeudi, 27. septembre 2007 4:40 16
Call waiting
(Operator-dependent service). During a call, you may be informed that a caller is trying to reach you: you hear a special tone.
The caller's identity is displayed on the screen (name or number).
You can activate, deactivate, or status of the call waiting service in order to check if it is active or not.
During a call, if a second caller tries to contact you, the screen displays the call warning.
Auto redial
This menu allows you to call back a caller you have not managed to reach.
You can set the redial function to inactive, on request or systematic.
If you choose On demand, your phone will offer to redial your caller automatically if his number is busy.
Blacklist
The blacklist is used to limit failures on automatic calls (calls generated by the automatic redial function or by applications:
data, fax for example).
When several automatic calls failed with a number (number busy or unknown), this number is put in the blacklist and no
automatic call will be done with this number any more until you delete it from the blacklist.
Note: this function does not apply to the calls performed manually.
Voicemail
This function is used to record your voicemail access number.
New number
After an incoming or outgoing call, SMS or MMS with a number not stored in the phonebook, this option allows you to activate
or deactivate a request to store the number in the phonebook.
Networks
This menu allows you to configure network preferences.
Choose Selection to activate (automatically or manually) one of the networks accessible in the area in which your are located.
Choose Preferred to view all the pre-registered networks.
Choose Network type to select your network: GSM-DCS or PCS.
Choose GPRS to select the way you want to be attached on the GPRS network: always, or only when needed (when
launching a data connection).
44
Settings
253015633_LU_FCC_my411C_en.book Page 45 Jeudi, 27. septembre 2007 4:40 16
Security
This menu allows you to configure your phone's security settings.
PIN number
This menu allows you to activate and modify your phone's PIN.
To modify the PIN, select Modify PIN code and [Select].
Enter old PIN and validate.
Enter new PIN twice and validate.
To activate or deactivate the PIN, select the Control PIN menu and [Select].
Enter PIN and validate.
Select Activate or Deactivate and validate.
PIN2 number
You have a second PIN number to allow you to access certain functions (*).
Proceed as above in order to activate or deactivate PIN number 2 of your phone.
Phone code
The Phone code menu allows you to activate the phone code so that it is requested and checked whenever the phone is
switched on if a different SIM card is used. This code is automatically linked to the SIM card installed when the phone is
activated, for example to protect the phone if stolen.
Select Activation and [Select].
Enter 0000 (the factory code, by default) and validate.
Select Activate or Deactivate and validate.
To modify the phone code, select Modify and validate.
Enter old phone code and validate.
Enter new phone code and validate.
Enter phone code again to confirm it and validate.
(*) These functions may or may not be available depending on your SIM card.
Settings
45
253015633_LU_FCC_my411C_en.book Page 46 Jeudi, 27. septembre 2007 4:40 16
Confidentiality
This menu allows the activation or deactivation of automatic deletion, after power off/on, of outgoing calls, messages stored
or organizer events.
Select Activate or Deactivate and validate.
Operator
This menu allows you to modify the call barring.
Access to this service depends on your type of subscription.
Call barring
This menu allows you to block the sending or receiving of certain calls.
Before you can use this service, a password will be provided by your operator when you take out your subscription.
Access to this service depends on your subscription type.
To activate call barring :
- Select incoming or outgoing calls.
- Select the call type on which you want to activate call barring.
- Select:
• either All,
• or If roaming, if you are away from your home country and if roaming is available, only incoming calls will be blocked.
- Select Activation and enter password.
Fixed dialling
This menu allows you to restrict the outgoing calls.
The availability of this menu depends on your SIM.
Enter PIN2 number and validate.
Select Activate or Deactivate and validate.
Proceed as for any other phonebook.
When activating this function, only the numbers stored in the phonebook can be called.
This phonebook is linked to the SIM card, and its size depends on the card's capacity.
46
Settings
253015633_LU_FCC_my411C_en.book Page 47 Jeudi, 27. septembre 2007 4:40 16
Cost
This menu allows you to control the cost of your calls (*).
Browser
This menu allows you to set various parameters needed for WAP connection (see chapter WAP).
Multimedia
Player
This menu allows you to select the music play options.
Camera
This menu allows you to set the camera features of your phone.
- Timer duration: this menu enables you to take a photo with a 5, 10 or 15 second time delay.
- Click sound: This menu allows you to select the sound you will hear when taking a photo.
- Photo format: This menu allows you to choose the format in which your photo will be saved.
- Photo quality: This menu allows you to select the photo quality.
Video
This menu allows you to set the video features of your phone.
- Video sound: This menu allows you to select or not the sound when recording a video.
- Video size restriction: This menu allows you to choose a video size.
Storage
This menu allows you to select (phone memory or memory card) where the sounds, pictures, videos or applications
downloads will be stored.
Help
This menu allows you to activate or deactivate the display of the help in the phone.
(*) These functions may or may not be available depending on your SIM card.
Settings
47
253015633_LU_FCC_my411C_en.book Page 48 Jeudi, 27. septembre 2007 4:40 16
Technical features
Weight: 87 g
Size: 91 x 46 x 16.5 mm
Original battery: Li-ion
Battery life calls/standby: up to 3 h 00/200 h (these values are theoretical ones and given for information only)
Multimedia objects supported:
- Audio formats: iMelody, Midi, wav, MP3, AAC (depending on model), AMR NB
- Graphic formats: wbmp, bmp, png, gif, animated gif, jpeg, 3gp (*) (depending on model)
Size of memory available for messages: 100 messages
Size of memory available for MMS, the phonebook and the multimedia objects: up to 10 Mb (depending on model)
Maximum size of each message:
- SMS: < 160 characters
- MMS: < 300 kB for outgoing messages, 100 kB for incoming messages (depends on the phone configuration and on the
operator reservations)
Using temperature: from - 10 °C to + 55 °C
Memory card maximum size: 2 GB
(*) For these formats, some resolutions may not be compatible with your phone.
48
Technical features
253015633_LU_FCC_my411C_en.book Page 49 Jeudi, 27. septembre 2007 4:40 16
Certification and safety information for the United
States and countries using FCC standards
FCC Part 15 statement
This device complies with part 15, part 22 and part 24 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING
Changes or modifications made to this equipment not expressly approved by Sagem Mobiles for compliance could void the
user's authority to operate the equipment.
Certification and safety information for the United States and countries using FCC standards
49
253015633_LU_FCC_my411C_en.book Page 50 Jeudi, 27. septembre 2007 4:40 16
FCC SAR information
THIS MODEL PHONE MEETS THE FCC'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure
to radiofrequency (RF) energy set by the United States Federal Communications Commission (FCC). These limits are part
of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based
on standards that were developed by independent scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless
of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate,
or SAR. The SAR limit set by the FCC and Health Canada is 1.6 W/kg (*). Tests for SAR are conducted using standard
operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating
can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower
the power output.
Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the
RF limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and
locations (i.e., at the ear and worn on the body) as required by the FCC for each model.
The highest SAR value for these model phones as reported to the FCC when tested for use at the ear and when worn on the
body are (measured at a distance of 0.59 inches (1.5 cm)):
SAR at the ear (W/kg)
SAR worn on the body (W/kg)
PCS 1900
PCS 1900
0.735
0.509
(*) In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kilogram (W/kg)
averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection
for the public and to account for any variations in measurements.
50
Certification and safety information for the United States and countries using FCC standards
253015633_LU_FCC_my411C_en.book Page 51 Jeudi, 27. septembre 2007 4:40 16
While there may be differences between the SAR levels of various phones and at various positions, they all meet the FCC
requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated
as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can
be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID M9HBC06S4 (my411C).
Additional Information can be found on the website of the World Health Organization (http://www.who.int/emf).
Safety Information
Aircraft: Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers
a “flight mode” or similar feature, consult airline staff as to its use in flight.
Driving: Full attention should be given to driving at all times, and regulations restricting the use of wireless devices while
driving must be observed. For further driving safety tips, please refer to Driving safety tips at page 55.
Hospitals: Mobile phones should be switched off whenever you are requested to do so in hospitals, clinics or health care
facilities. These requests are designed to prevent possible interference with sensitive medical instruments.
Gas stations: Obey all posted signs with respect to the use of wireless devices or other radio equipment in locations with
flammable material and chemicals. Switch of your wireless device whenever you are instructed to do so by authorized staff.
Interference with personal medical devices: You should always consult your physician and review the device
manufacturer's instructions to determine if operation of your phone may interfere with the operation of your medical device.
As a general rule:
- For pacemakers: Pacemaker manufacturers recommend that a minimum separation of 6 inches (15 cm) be maintained
between a mobile phone and a pacemaker to avoid potential interference with the pacemaker. To achieve this, use the
phone on the opposite ear to your pace maker and do not carry it in a breast pocket.
- For hearing aids: Some digital wireless phones may interfere with some hearing aids. In the event of such interference,
you may want to consult your hearing aid manufacturer to discuss alternatives.
The ring tone, info tones, and handsfree talking are reproduced through the loudspeaker. Do not hold the phone to your ear
when it rings or when you have switched on the handsfree function (at least 3.9 inches (10 cm)).
Use only batteries and charging devices designed for your phone. Otherwise you risk serious damage to health and property
and may void any warranty.
CAUTION! Small parts like the SIM card could be swallowed by young children.
Do NOT open the phone. Only the battery and the SIM card may be removed. Do NOT open the battery.
Keep the battery out of chidren’s reach. Do not allow the battery to be put into the mouth.
Certification and safety information for the United States and countries using FCC standards
51
253015633_LU_FCC_my411C_en.book Page 52 Jeudi, 27. septembre 2007 4:40 16
Distance of operation
This phone is designed to comply with the FCC radio frequency (RF) exposure guidelines when used as follows:
- Against the ear: Place or receive a phone call and hold the phone as you would a wireline telephone.
- Body worn: When transmitting, place the phone in a carrying accessory that contains no metal and positions the phone
a minimum of 0.59 inches (1.5 cm) from your body. Use of other accessories may not ensure compliance with exposure
guidelines. If you do not use a body worn accessory and are not holding the phone at the ear, position the phone a
minimum of 0.59 inches (1.5 cm) from your body.
- Data operation: When using a data feature, position the phone a minimum of 0.59 inches (1.5 cm) from your body for the
whole duration of the data transmission.
FDA consumer information on wireless phones
The US Food and Drug Administration (FDA) provides consumer information on wireless phones
at: http://www.fda.gov/cellphones/qa.html.
Following are safety related questions and answers discussed at this web site:
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are associated with using wireless phones. There
is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy
(RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas
high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological
effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by
additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the
reasons for inconsistent results.
What is FDA's role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones
are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the
manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the
hazard no longer exists.
52
Certification and safety information for the United States and countries using FCC standards
253015633_LU_FCC_my411C_en.book Page 53 Jeudi, 27. septembre 2007 4:40 16
Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take
a number of steps, including the following:
- Support needed research into possible biological effects of RF of the type emitted by wireless phones;
- Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and
- Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone
use on human health.
FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety
to ensure coordinated efforts at the federal level. The following agencies belong to this working group:
- National Institute for Occupational Safety and Health
- Environmental Protection Agency
- Federal Communications Commission
- Occupational Safety and Health Administration
- National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones
that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and
other health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless phones. Base stations are thus not the primary subject of the
safety questions discussed in this document.
What is FDA doing to find out more about the possible health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that
high priority animal studies are conducted to address important questions about the effects of exposure to radiofrequency
energy (RF).
FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since
its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that
has driven the establishment of new research programs around the world. The Project has also helped develop a series of
public information documents on EMF issues.
Certification and safety information for the United States and countries using FCC standards
53
253015633_LU_FCC_my411C_en.book Page 54 Jeudi, 27. septembre 2007 4:40 16
FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and
Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining
input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through
contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone
users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research
developments around the world.
What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone?
If there is a risk from these products--and at this point we do not know that there is--it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radiofrequency
energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
If you must conduct extended conversations by wireless phone every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset
and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless
phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radiofrequency energy (RF), the measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and
the RF source will reduce RF exposure.
Some groups sponsored by other national governments have advised that children be discouraged from using wireless
phones at all.
Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that
handsfree kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These systems
reduce the absorption of RF energy in the head because the phone, which is the source of the RF emissions, will not be placed
against the head. On the other hand, if the phone is mounted against the waist or other part of the body during use, then that
part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements
regardless of whether they are used against the head or against the body. Either configuration should result in compliance
with the safety limit.
54
Certification and safety information for the United States and countries using FCC standards
253015633_LU_FCC_my411C_en.book Page 55 Jeudi, 27. septembre 2007 4:40 16
Do wireless phone accessories that claim to shield the head from RF radiation work?
Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from
RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone.
Studies have shown that these products generally do not work as advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may be forced to boost its power to compensate, leading to an
increase in RF absorption.
Driving safety tips
Wireless phones give people the ability to communicate almost anywhere, anytime. But an important responsibility
accompanies those benefits, one that every wireless phone user must uphold. When driving a car, driving is your first
responsibility.
Below are safety tips to follow while driving and using a wireless phone that should be easy to remember.
Get to know your wireless phone and its features such as speed dial and redial.
When available, use a hands free device.
Position your wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you
get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.
Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous
weather conditions.
Do not take notes or look up phone numbers while driving.
Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan
your calls before you begin your trip. But if you need to dial while driving, follow this simple tip--dial only a few numbers, check
the road and your mirrors, then continue.
Do not engage in stressful or emotional conversations that may be distracting.
Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident, road
hazard or medical emergency.
Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious
emergency where lives are in danger, call 9-1-1 or other local emergency number.
Call roadside assistance or a special wireless non-emergency assistance number when necessary. If you see a broken-down
vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured or a vehicle
you know to be stolen, call roadside assistance or other special non-emergency wireless number.
Certification and safety information for the United States and countries using FCC standards
55
253015633_LU_FCC_my411C_en.book Page 56 Jeudi, 27. septembre 2007 4:40 16
Certification and safety information for Europe and
countries using CE standards
CE conformance statement
56
Certification and safety information for Europe and countries using CE standards
253015633_LU_FCC_my411C_en.book Page 57 Jeudi, 27. septembre 2007 4:40 16
CE SAR information
THIS MODEL MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines were developed by the independent scientific organization
ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.
The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices
is 2 W/kg and the highest SAR value for this device when tested at the ear was 0.83 W/kg (*). As mobile devices offer a range
of functions, they can be used in other positions, such as on the body as described in this user guide (**).
As SAR is measured utilizing the devices highest transmitting power the actual SAR of this device while operating is typically
below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the
minimum level required to reach the network.
The World Health Organization has stated that present scientific information does not indicate the need for any special
precautions for the use of mobile devices. They note that if you want to reduce your exposure then you can do so by limiting
the length of calls or using a 'hands-free' device to keep the mobile phone away from the head and body. Additional
Information can be found on the websites of the World Health Organization (http://www.who.int/emf).
Advice for limiting exposure to radiofrequency (RF) fields
For individuals concerned about limiting their exposure to RF fields, the World Health Organization (WHO) provides the
following advice:
Precautionary measures: Present scientific information does not indicate the need for any special precautions for the use of
mobile phones. If individuals are concerned, they might choose to limit their own or their children’s’ RF exposure by limiting
the length of calls, or using "hands-free" devices to keep mobile phones away from the head and body.
Further information on this subject can be obtained from the WHO home page http://www.who.int/peh-emf WHO Fact
sheet 193: June 2000.
(*) The tests are carried out in accordance with international guidelines for testing.
(**) Please see the Distance of operation section about body worn operation, page 59.
Certification and safety information for Europe and countries using CE standards
57
253015633_LU_FCC_my411C_en.book Page 58 Jeudi, 27. septembre 2007 4:40 16
Safety information
Never attempt to disassemble your phone. You alone are responsible for how you use your phone and any consequences of
its use.
As a general rule, always switch off your phone wherever the use of a phone is prohibited.
Use of your phone is subject to safety measures designed to protect users and their environment.
Do not use your phone in damp areas (bathroom, swimming pool…). Protect it from liquids and other moisture.
Do not expose your phone to extreme temperatures lower than - 10°C and higher than + 55°C.
The physicochemical processes created by chargers impose temperature limits when charging the battery. Your phone
automatically protects the batteries in extreme temperatures.
Do not leave your phone within the reach of small children (certain removable parts may be accidentally ingested).
Electrical safety
Only use the chargers listed in the manufacturer’s catalogue. Using any other charger may be dangerous; it would also
invalidate your warranty. Line voltage must be exactly the one indicated on the charger’s serial plate.
Aircraft safety
When travelling by plane, you will need to switch your phone off when so instructed by the cabin crew or the warning signs.
Using a mobile phone may be dangerous to the operation of the aircraft and may disrupt the phone network.
Its use is illegal and you could be prosecuted or banned from using cellular networks in the future if you do not abide by these
regulations.
Explosive materials
Please comply with warning signs at petrol station asking you to switch your phone off. You will need to comply with radio
equipment usage restrictions in places such as chemical plants, fuel depots and at any location where blasting operations
are under way.
Electronic equipment
To avoid the risk of demagnetisation, do not let electronic devices close to your phone for a long time.
Electronic medical equipment
Your phone is a radio transmitter which may interfere with electronic medical equipment or implants, such as hearing aids,
pacemakers, insulin pumps, etc. It is recommended that a minimum separation of 15 cm be maintained between the phone
and an implant. Your doctor or the manufacturers of such equipment will be able to give you any advice you may need in this
area.
Hospitals
Always make sure that your phone is switched off in hospitals when so instructed by warning signs or by medical staff.
58
Certification and safety information for Europe and countries using CE standards
253015633_LU_FCC_my411C_en.book Page 59 Jeudi, 27. septembre 2007 4:40 16
Road safety
Do not use your phone when driving. In order to give your full attention to driving, stop and park safely before making a call.
You must comply with any current legislation.
Accessories
We advise you the use of SAGEM brand accessories for an optimal operating of your phone and of your accessories.
Distance of operation
This phone model has been tested and meets radiofrequency exposure guidelines when used as follows:
- against the ear: place or receive a phone call and hold the phone as you would a wireline telephone,
- body worn: when transmitting, place the phone in a carry accessory that contains no metal and positions the phone a
minimum of 1.5 cm form your body. Use of other accessories may not ensure compliance with radiofrequency exposure
guidelines. If you do not use a body worn accessory and are not holding the phone at the ear, position the phone a
minimum of 1.5 cm from your body,
- data operation: when using a data feature, position the phone a minimum of 1.5 cm from your body for the whole duration
of the data transmission.
CE Environment
Packaging
To facilitate the recycling of packaging materials, please obey the sorting rules instituted locally for this type of waste.
Batteries
Spent batteries must be deposited at the designated collection points.
The product
The crossed-out waste bin mark affixed to the product (including its accessories) means that it belongs to the family
of electrical and electronic equipment.
To promote the recycling and recovery of waste electrical and electronic equipment (WEEE) and at the same time
safeguard the environment, European regulations require you to obey the sorting rules instituted locally for this type
of waste.
Certification and safety information for Europe and countries using CE standards
59
253015633_LU_FCC_my411C_en.book Page 60 Jeudi, 27. septembre 2007 4:40 16
For Customers in the United States
LIMITED WARRANTY
Brightstar US, Inc. (Brightstar) warrants this product including any accessories sold for use with the products against defects
in materials or workmanship under normal usage for the periods outlined in the warranty provided with the product, as follows:
DEAD ON ARRIVAL / OUT OF BOX FAILURE (DOA):
This product is for standard consumer use only and is guaranteed to be in proper working order as is determined upon initial
removal from the package and subsequent power up and test call. If this product is determined to be defective, Brightstar will
repair or replace the product, at its option, at no charge.
OUT OF WARRANTY REPAIR
Any unit requiring repair not covered by the warranty requires authorization from your service provider and Brightstar. Contact
your service provider to obtain this authorization.
This warranty is valid only in the United States.
OTHER CONDITIONS
If Brightstar chooses to replace the equipment, Brightstar may replace it with reconditioned equipment. Parts used in repairing
or replacing the equipment will be warranted for 90 days from the date the equipment is returned to you. This warranty is not
transferable.
LIMITATIONS AND EXCLUSIONS
TO THE EXTENT PERMITTED BY APPLICABLE LAW, BRIGHTSTAR WILL NOT BE RESPONSIBLE FOR ANY IMPLIED
WARRANTIES, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTIBILITY OR FITNESS
FOR A PARTICULAR PURPOSE. BRIGHTSTAR WILL NOT, IN ANY EVENT, BE LIABLE IN CONTRACT OR TORT FOR
DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INCIDENTAL,
INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, INCLUDING TRAVEL EXPENSE, TELEPHONE
CHARGES, LOSS OF REVENUE, LOSS OF TIME, INCONVENIENCE LOSS OF USE OF EQUIPMENT, LOSS OF
INFORMATION OR DATA, OR OTHER DAMAGE OR LOSS CAUSED BY OR IN CONNETION WITH THE PRODUCTS,
ACCESSORIES, SOFTWARE OR EQUIIPMENT FAILING TO FUNCTION PROPERLY. THIS WARRANTY SETS FORTH
ALL OF BRIGHTSTAR’S REPONSIBILITIES REGARDING THIS PRODUCT AND ITS ACCESSORIES.
Some states and jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or allow
limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
60
For Customers in the United States
253015633_LU_FCC_my411C_en.book Page 61 Jeudi, 27. septembre 2007 4:40 16
Limited Warranty
The mobile phone and software program developed by Sagem Mobiles (SAGEM) remains the exclusive property of SAGEM.
YOU ARE STRICTLY PROHIBITED FROM MODIFYING, TRANSLATING, DE-COMPILING OR DISASSEMBLING THIS
SOFTWARE PROGRAM OR ANY PART THEREOF.
Brightstar US, Inc. (Brightstar) is the exclusive distributor for SAGEM in the United States and is responsible for all warranties
for SAGEM phones and accessories sold in the United States. Please DO NOT contact SAGEM directly regarding any
warranty claims; doing so will only delay the processing of your claim.
THE LIMITED WARRANTY AND REMEDIES SET FORTH IN THIS WARRANTY CARD ARE THE EXCLUSIVE
WARRANTIES AND REMEDIES PROVIDED BY BRIGHTSTAR AND ARE IN LIEU OF ALL OTHER WARRANTIES,
TERMS, OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW. BRIGHTSTAR OR
SAGEM MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND EXPRESSLY DISCLAIMS ALL IMPLIED
WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. THE REMEDIES SET FORTH HEREIN ARE YOUR EXCLUSIVE REMEDIES FOR BREACH OF WARRANTY.
Usage precautions
Your phone allows you to download ring tones, icons and animated screensavers. Some of these items may contain data that
may cause malfunction of your phone or data losses (a computer virus, for example). For this reason, Brightstar disclaims all
responsibility concerning (1) the reception of downloaded data or losses of such data, (2) such data's impact on the operation
of the phone, and (3) damages resulting from receiving any downloaded data or loss of such data. In addition, any failure
caused by receiving downloaded data that do not comply with the phone's specifications is excluded from the warranty. The
diagnosis and repair of a phone infected by downloaded data will be at the expense of the customer.
Warranty conditions
Whenever you wish to make a warranty claim, please contact Brightstar at the address given below and present the
purchasing paperwork that was given to you.
1. Brightstar warrants that the new phone (excluding consumablesbut including new accessories bundled with the phone), is
free from defects in materials and workmanship under normal usage for a period of twelve (12) months effective from the date
you purchased the phone, to be evidenced by presentation of the paperwork stating the purchase date of the phone. Phones
that have been repaired or replaced as standard during the warranty period stated above are warranted (parts and labor) until
the later of these two dates: Expiry of the original warranty period of twelve (12) months stated above; or three (3) months
from the repair or replacement under warranty.
2. All faulty phones under warranty will be replaced or repaired free of charge at Brightstar’s option.
For Customers in the United States
61
253015633_LU_FCC_my411C_en.book Page 62 Jeudi, 27. septembre 2007 4:40 16
3. You are responsible for sending the phone to the repair center. In order to repair or replace a phone under warranty,
Brightstar also requires that a legible and unmodified purchase document, stating vendor's name and address, date and place
of purchase, type of phone and IMEI (to display the IMEI on your phone's screen, type: *#06#), be attached to the warranty,
and that the information on the phone identification label be legible and that such label or any other seal have not been
tampered with. The warranty applies under normal usage for the period outlined above. Prior to sending the phone for repair,
it is your responsibility to backup at your expense any customized data stored in the phone (such as phonebook, settings,
wallpapers, and previously downloaded data). BRIGHTSTAR IS NOT RESPONSIBLE FOR DAMAGE TO CUSTOMER
FILES, PROGRAMS OR DATA. The information or operating elements and the contents of files will not be re-installed in any
case in the event of loss. Brightstar may decide, at its option, to repair the phone with new or reconditioned parts, or replace
the phone with a new phone or with a phone in good working condition. During its repair work Brightstar may make, where
necessary, any technical modifications to the phone where these modifications do not adversely affect functionality. Faulty
parts to be replaced during a repair under warranty become the property of Brightstar. The application of the warranty is
subject to the full payment of the sums due for the phone when the request for support is made.
4. Breakdowns, damage or malfunctions due to the following are excluded from the limited warranty: (i) non-compliance with
the installation and use instructions, (ii) an external cause (such as shock, lightning, fire, vandalism, malice, water damage of
any type, contact with various liquids or any harmful agent, unsuitable electric current, extreme humidity or heat, improper
storage, etc.), (iii) modifications of the phone made without the written consent of Brightstar, (iv) a servicing fault, as described
in the documentation supplied with the phone, (v) lack of supervision or care, (vi) poor environmental conditions of the phone
(including temperature and hygrometry, effects of variations in electric voltage, interference from the mains network or earth),
(vii) repair, including opening or trying to open the phone or servicing done by personnel not approved by Brightstar, (viii)
inadequate packaging and/or poor packing of the phone that is sent back to Brightstar, (ix) the use of products or accessories
not sold by Brightstar as compatible with the phone, or (x) the opening or closing of a SIM Lock done without the agreement
of the original operator.
5. In addition, the warranty does not cover: (i) normal wear and tear of the phone and accessories, (ii) change of parameters
of the cellular network made after the phone was sold, (iii) supply of new software versions, (iv) delivery of consumables and
installation or replacement of these consumables, (v) phone or software modified or added without the written consent of
Brightstar, (vi) phones returned to Brightstar without having complied with the return procedure specific to the phone covered
by this warranty, or (vii) communication problems linked with a poor environment, including problems accessing and/or
logging onto the Internet, breakdowns of the access network, the failure of the subscriber's or his correspondent's line,
transmission fault (such as poor geographic coverage by radio transmitters, interference, disturbance, failure or poor quality
of phone lines, etc.), a fault inherent to the local network (such as cabling, file server, user phone) and/or transmission network
fault (such as interference, disturbance, failure or poor quality of the network, etc.).
62
For Customers in the United States
253015633_LU_FCC_my411C_en.book Page 63 Jeudi, 27. septembre 2007 4:40 16
6. In the event a customer submits a product for repair or replacement and such product is excluded from warranty coverage
or the warranty period has expired, Brightstar will draw up an estimate to be given to the customer for acceptance before any
repair commences. The repair and freight costs (to and from the repair center) given in an estimate accepted by the customer
will be charged to the customer.
7. Any questions or correspondence regarding this limited warranty should be addressed to:
Brightstar US, Inc.
Attn: SAGEM Warranty & Repair Services
1001 Technology Way
Libertyville, IL 60048
These provisions are valid unless Brightstar has made a special written agreement with the customer. If one of the
provisions turns out to infringe a requirement under applicable law that consumers could have the benefit of under the
national legislation, such provision will not be applied, but all other provisions will remain valid.
For Customers in the United States
63
253015633_LU_FCC_my411C_en.book Page 64 Jeudi, 27. septembre 2007 4:40 16
For customers outside the United States
Warranty
You must always use your phone for the purpose for which it was designed, under normal operating conditions.
Sagem Mobiles declines all responsibility for any use outside of the scope of its designed purpose and for any consequences
of this use.
The software program developed by SAGEM remains the exclusive property of Sagem Mobiles. It is therefore highly
prohibited to modify, translate, de-compile or disassemble this software program or any part thereof.
Usage precautions
Your phone allows you to download ring tones, icons and animated screensavers. Some of these items may contain data that
may cause malfunctions of your phone or data losses (virus for example).
For this reason, Sagem Mobiles rejects all responsibility concerning (1) the reception of downloaded data or losses of the said
data, (2) the impact on the operation of the phone and (3) damages resulting from receiving the said downloaded data or loss
of said data. In addition, Sagem Mobiles states that a failure caused by receiving downloaded data that do not comply with
the specifications set by Sagem Mobiles is excluded from the warranty. Consequently, the diagnosis and repair of a phone
infected by the said downloaded data will be at the expense of the customer.
Any content that you download to your phone may be protected by copyright belonging to third parties and consequently you
may not have the right to use this content or its use may be restricted. Consequently it is up to you to ensure that you have
permission, such as under the terms of a license agreement, to use any content that you download. Furthermore,
Sagem Mobiles does not guarantee the accuracy nor the quality of any content that you download. You alone are responsible
for the content that you download to your mobile phone and how you use it. Sagem Mobiles cannot be held responsible for
this content nor for its use.
It is your responsibility to ensure compliance, at your own expense, with the laws and regulations applicable in the country
where you use your phone.
Warranty conditions
Whenever you wish to make use of the warranty, please contact your vendor and present him with the purchasing paperwork
that he gave you.
If a fault occurs, he will advise you.
1. The new phone (excluding consumables), including new accessories bundled with the phone, are guaranteed by
Sagem Mobiles, parts and labour (apart from travel) against any manufacturing fault for a period of twelve (12) months with
effect from the sale of the phone to the customer, on presentation of the paperwork stating the purchase date of the phone.
64
For customers outside the United States
253015633_LU_FCC_my411C_en.book Page 65 Jeudi, 27. septembre 2007 4:40 16
Phones that have been repaired or replaced as standard during the warranty period stated above are guaranteed (parts and
labour) until the later of these two dates:
Expiry of the guarantee period of twelve (12) months stated above or three (3) months with effect from the date of support
provided by Sagem Mobiles.
Your legal rights under the terms of applicable national law as well as your rights in relation to your retailer, as set out in the
sales contract, remain applicable and are not in any way affected by this guarantee.
In any disputes, the phone is covered by the legal warranty against the consequences of faults or hidden defects in
compliance with articles 1641 and subsequent of the French civil code.
2. All faulty phones under warranty will be replaced or repaired free of charge at Sagem Mobiles's option (with the exclusion
of repair of any other damage), once it has been specified that the work required for the application of the warranty will be
done in a workshop and that the return costs (transport and insurance) of the phone to the address to be indicated to it by the
Sagem Mobiles after-sales service, whose phone number will appear on the delivery note, will be charged to the customer.
Subject to essential legal provisions, Sagem Mobiles does not accept any warranty, explicit or implicit, other than the warranty
provided expressly in this chapter, nor shall Sagem Mobiles accept responsibility for any immaterial and/or indirect damages
(such as loss of orders, loss of profit or any other financial or commercial damage) under the warranty or not
3. The acceptance of a phone under warranty demands that a purchase document that is legible and without modi-fication,
stating vendor's name and address, date and place of purchase, type of phone and IMEI, are attached to the warranty, and
that the information on the phone identification label is legible and that this label or any other seal has not been tampered with.
The warranty applies in normal conditions of use.
Prior to sending the phone for repair, it is the customer's responsibility to backup at his expense the customized data stored
in the phone (phonebook, settings, wallpapers). A list of backup facilities can be provided by Sagem Mobiles on request. The
responsibility of Sagem Mobiles cannot be invoked if damage occurs to customer files, programs or data. The information or
operating elements and the contents of files will not be re-installed in any case in the event of loss.
Sagem Mobiles may decide, at its option, to repair the phone with new or reconditioned parts, replace the phone with a new
phone or, in any dispute, a phone in good working condition. During its work Sagem Mobiles reserves the facility to make,
where necessary, any technical modifications to the phone where these modifications doe not adversely affect its initial
purpose.
Faulty parts to be replaced during a repair under warranty will become the property of Sagem Mobiles.
The phone repair and standstill time during the warranty period may not lead to an extension of the warranty period as stated
in article 1 above, provided no other vital provisions have been agreed.
The application of the warranty is subject to the full payment of the sums due for the phone when the request for support is
made.
For customers outside the United States
65
253015633_LU_FCC_my411C_en.book Page 66 Jeudi, 27. septembre 2007 4:40 16
4. The following are excluded from the warranty:
Breakdowns or malfunctions due to non-compliance with the installation and use instructions, to an external cause of the
phone (shock, lightning, fire, vandalism, malice, water damage of any type, contact with various liquids or any harmful agent,
unsuitable electric current...), to modifications of the phone made without the written consent of Sagem Mobiles, to a servicing
fault, as described in the documentation supplied with the phone, to lack of supervision or care, to poor environmental
conditions of the phone (especially temperature and hygrometry, effects of variations in electric voltage, interference from the
mains network or earth) or even due to a repair, a call-out (opening or trying to open the phone) or to servicing done by
personnel not approved by Sagem Mobiles.
Damage resulting from inadequate packaging and/or poor packing of the phone sent back to Sagem Mobiles.
Normal wear and tear of the phone and accessories.
Communication problems linked with a poor environment, especially:
Problems accessing and/or logging onto the Internet, such as breakdowns of the access network, the failure of the
subscriber's or his correspondent's line, transmission fault (poor geographic coverage by radio transmitters, interference,
disturbance, fai-lure or poor quality of phone lines...), a fault inherent to the local network (cabling, file server, user phone)
and/or transmission network fault (interference, disturbance, failure or poor quality of the network...).
Change of parameters of the cellular network made after the phone was sold.
Supply of new software versions.
Current servicing work: delivery of consumables, installation or replacement of these consumables…
Call-outs for phone or software modified or added without the written consent of Sagem Mobiles.
Faults or disruptions resulting from the use of products or accessories not compatible with the phone.
Phones returned to Sagem Mobiles without having complied with the return procedure specific to the phone cove-red by this
warranty.
The opening or closing of a SIM operator key and call-outs resulting in the non-operation of the phone resulting from the
opening or closing of SIM operator key done without the agreement of the original operator.
5. In the cases of warranty exclusion and of expiry of the warranty period, Sagem Mobiles shall draw up an estimate to be
given to the customer for acceptance before any call-out. The repair and carriage costs (there and back) given in the accepted
estimate will be charged to the customer.
These provisions are valid unless a special written agreement has been made with the customer. If one of the provisions turns
out to infringe a legally essential rule that consumers could have the benefit of under the national legislation, this provision
will not be applied, but all other provisions will remain valid.
6. Any questions or correspondence regarding this limited warranty should be addressed to:
www.planetsagem.com.
66
For customers outside the United States
253015633_LU_FCC_my411C_en.book Page 67 Jeudi, 27. septembre 2007 4:40 16
End User Licence Agreement (EULA), for the
software
CONTEXT AND ACCEPTATION OF THE AGREEMENT
You have acquired a Mobile Phone device ("DEVICE"), manufactured by Sagem Mobiles (SAGEM), that includes software
either developed by SAGEM itself or licensed third party Software suppliers ("SOFTWARE COMPANIES") to SAGEM with
the rights to sub-license it to the purchaser of the device. Those installed software products whatever their company of origin,
and wherever the name of the company of origin is indicated of not in the DEVICE documentation, as well as associated
media, printed materials, and "online" or electronic documentation ("SOFTWARE") are protected by United States and
international intellectual property laws and treaties. The SOFTWARE is licensed, not sold. The owner of the Software
expressly reserves all rights.
IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT ("EULA"), DO NOT USE THE DEVICE OR COPY
THE SOFTWARE. INSTEAD, PROMPTLY CONTACT SAGEM FOR INSTRUCTIONS ON RETURN OF THE UNUSED
DEVICE(S) FOR A REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE,
WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT).
SOFTWARE includes software already installed on the DEVICE ("DEVICE Software") and Software contained on the
CDROM disk ("Companion CD"), if any is supplied with the product.
GRANT OF SOFTWARE LICENCE
This EULA grants you the following licence:
DEVICE Software. You may use the DEVICE Software as installed on the DEVICE. All or certain portions of the DEVICE
Software may be inoperable if you do not have and maintain a service account with an appropriate Mobile Operator, or if the
Mobile Operator's network facilities are not operating or configured to operate with the DEVICE software.
COMPANION CD. If any is supplied, additional software for your personal computer is included with your DEVICE. You may
install and use the software component(s) contained in the Companion CD only in accordance with the terms of the printed
or online end user license agreement(s) provided with such component(s). In the absence of an end user license agreement
for particular component(s) of the Companion CD, you may install and use only one (1) copy of such component(s) on the
DEVICE or a single computer with which you use the DEVICE.
End User Licence Agreement (EULA), for the software
67
253015633_LU_FCC_my411C_en.book Page 68 Jeudi, 27. septembre 2007 4:40 16
Security Updates. The SOFTWARE may include digital rights management technology. If SOFTWARE does contain digital
rights management technology, content providers are using the digital rights management technology ("DRM") contained in
the SOFTWARE to protect the integrity of their content ("Secure Content") so that their intellectual property, including
copyright, in such content is not misappropriated. Owners of such Secure Content ("Secure Content Owners") may, from time
to time, request manufacturers or SOFTWARE SUPPLIERS to provide security related updates to the DRM components of
the SOFTWARE ("Security Updates") that may affect your ability to copy, display and/or play Secure Content through the
SOFTWARE or third party applications that utilise the DRM.
You therefore agree that, if you elect to download a licence from the Internet that enables your use of Secure Content,
Suppliers may, in conjunction with such licence, also download onto your DEVICE such Security Updates that a Secure
Content Owner has requested that SOFTWARE SUPPLIERS distribute. SAGEM and SOFTWARE SUPPLIERS will NOT
retrieve any personally identifiable information, or any other information, from your DEVICE by downloading such Security
Updates.
DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS COPYRIGHT.
All title and intellectual property rights in and to the SOFTWARE (including but not limited to any images, photographs,
animations, video, audio, music, text and "applets," incorporated into the SOFTWARE), the accompanying printed materials,
and any copies of the SOFTWARE, are owned by SAGEM or the SOFTWARE SUPPLIERS. You may NOT copy the printed
materials accompanying the SOFTWARE. All title and intellectual property rights in and to the content which may be accessed
through use of the SOFTWARE is the property of the respective content owner and may be protected by applicable copyright
or other intellectual property laws and treaties. THIS EULA GRANTS YOU NO RIGHTS TO USE SUCH CONTENT. All rights
not specifically granted under this EULA are reserved by SAGEM and the SOFTWARE SUPPLIERS.
Limitations on Reverse Engineering, Decompilation and Disassembly. You may not reverse engineer, decompile, or
disassemble the SOFTWARE.
Single DEVICE. The DEVICE Software is licensed with the DEVICE as a single integrated product. The DEVICE Software
installed in the memory of the DEVICE may only be used as part of the DEVICE.
Single EULA. The package for the DEVICE may contain multiple versions of this EULA, such as multiple translations and/or
multiple media versions (e.g., in the user documentation and in the software). Even if you receive multiple versions of the
EULA, you are licensed to use only one (1) copy of the DEVICE Software.
Software Transfer. You may NOT transfer any of your rights under this EULA with regard to the DEVICE Software or
Companion CD, except as permitted by the applicable Mobile Operator. In the event that the Mobile Operator permits such
transfer, you may transfer all of your rights under this EULA only as part of a sale or transfer of the DEVICE, provided you
retain no copies, you transfer all of the SOFTWARE (including all component parts, the media and printed materials, any
upgrades , this EULA and, if applicable, the Certificate(s) of Authenticity), and the recipient agrees to the terms of this EULA.
If the SOFTWARE is an upgrade, any transfer must include all prior versions of the SOFTWARE.
Software Rental. You may not rent or lease the SOFTWARE.
68
End User Licence Agreement (EULA), for the software
253015633_LU_FCC_my411C_en.book Page 69 Jeudi, 27. septembre 2007 4:40 16
Speech/Handwriting Recognition. If the SOFTWARE includes speech and/or handwriting recognition component(s), you
should understand that speech and handwriting recognition are inherently statistical processes; that recognition errors are
inherent in the processes; and that errors can occur in the component's recognition of your handwriting or speech, and the
final conversion into text. Neither SAGEM nor its suppliers shall be liable for any damages arising out of errors in the speech
and handwriting recognition processes.
NOTICE REGARDING THE MPEG-4 VISUAL STANDARD. The SOFTWARE may include MPEG-4 visual decoding
technology. MPEG LA, L.L.C. requires the following notice:
USE OF THIS SOFTWARE IN ANY MANNER THAT COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED,
EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR INFORMATION (i) GENERATED BY AND OBTAINED
WITHOUT CHARGE FROM A CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE, AND (ii) FOR
PERSONAL USE ONLY; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA, L.L.C.
If you have questions regarding this Notice, please contact MPEG LA, L.L.C., 250 Steele Street, Suite 300, Denver,
Colorado 80206; Telephone 303 331.1880; FAX 303 331.1879.
Termination. Without prejudice to any other rights, SAGEM may terminate this EULA if you fail to comply with the terms and
conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE and all of its component parts.
Consent to Use of Data. You agree that SOFTWARE SUPPLIERS may collect and use technical information gathered in
any manner as part of product support services related to the SOFTWARE. SOFTWARE SUPPLIERS may use this
information solely to improve their products or to provide customised services or technologies to you. SOFTWARE
SUPPLIERS may disclose this information to others, but only in a form that does not personally identifies you.
Internet Gaming/Update Features. If the SOFTWARE provides, and you choose to utilize, the Internet gaming or update
features within the SOFTWARE, it is necessary to use certain computer system, hardware, and software information to
implement the features. By using these features, you explicitly authorise SOFTWARE SUPPLIERS to use this information
solely to improve their products or to provide customized services or technologies to you. SOFTWARE SUPPLIERS may
disclose this information to others, but only in a form that does not personally identifies you.
Internet-Based Services Components. The SOFTWARE may contain components that enable and facilitate the use of
certain Internet-based services. You acknowledge and agree that SOFTWARE SUPPLIERS may automatically check the
version of the SOFTWARE and/or its components that you are utilising and may provide upgrades or supplements to the
SOFTWARE that may be automatically downloaded to your Device.
Links to Third Party Sites. The SOFTWARE may provide you with the ability to link to third party sites through the use of
the SOFTWARE. The third party sites are not under the control of SAGEM. Neither SAGEM nor its affiliates are responsible
for (i) the contents of any third party sites, any links contained in third party sites, or any changes or updates to third party
sites, or (ii) webcasting or any other form of transmission received from any third party sites. If the SOFTWARE provides links
to third party sites, those links are provided to you only as a convenience, and the inclusion of any link does not imply an
endorsement of the third party site by SAGEM or its affiliates.
End User Licence Agreement (EULA), for the software
69
253015633_LU_FCC_my411C_en.book Page 70 Jeudi, 27. septembre 2007 4:40 16
Additional Software/Services. The SOFTWARE may permit SAGEM to provide or make available to you SOFTWARE
updates, supplements, add-on components, or Internet-based services components of the SOFTWARE after the date you
obtain your initial copy of the SOFTWARE ("Supplemental Components").
If SAGEM provides or makes available to you Supplemental Components and no other EULA terms are provided along with
the Supplemental Components, then the terms of this EULA shall apply.
SAGEM reserves the right to discontinue any Internet-based services provided to you or made available to you through the
use of the SOFTWARE.
EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is subject to U.S. export jurisdiction. You agree to comply
with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration
Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other governments.
UPGRADES AND RECOVERY MEDIA
- DEVICE Software. If the DEVICE Software is provided by SAGEM separate from the DEVICE on media such as a ROM
chip, CD ROM disk(s) or via web download or other means, and is labeled "For Upgrade Purposes Only", you may install
one copy of such DEVICE Software onto the DEVICE as a replacement copy for the existing DEVICE Software and use it
in accordance with this EULA, including any additional EULA terms accompanying the upgrade DEVICE Software.
- COMPANION CD. If any Companion CD component(s) is provided by SAGEM separate from the DEVICE on CD ROM
disk(s) or via web download or other means, and labelled "For Upgrade Purposes Only" , you may (i) install and use one
copy of such component(s) on the computer(s) you use to exchange data with the DEVICE as a replacement copy for the
existing Companion CD component(s).
RESPONSIBILITIES
SUPPORT AND INFORMATION Should you have any questions concerning this EULA, or if you desire to contact SAGEM
for any other reason, please refer to the address provided in the documentation for the DEVICE.
SAGEM SHALL HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES
ARISING FROM OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION
SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE.
FOR APPLICABLE LIMITED WARRANTIES AND SPECIAL PROVISIONS PERTAINING TO YOUR PARTICULAR
JURISDICTION, PLEASE REFER TO YOUR WARRANTY BOOKLET INCLUDED WITH THIS PACKAGE OR PROVIDED
WITH THE SOFTWARE PRINTED MATERIALS.
70
End User Licence Agreement (EULA), for the software
253015633_LU_FCC_my411C_en.book Page 71 Jeudi, 27. septembre 2007 4:40 16
Java™
When running a Java™ application, you may be prompted to grant access to protected features. These features are protected
because using them could incur you cost, or involve your personal data. In case of doubt, don't hesitate to refuse access by
selecting the "No" button!
The security configuration menu is an expert feature! You must know exactly what you are doing before attempting to change
security parameters of a MIDlet. Misunderstanding changes may render MIDlet non functional and/or lead to higher risks for
your private data or impact your airtime consumption. Any changes in the security configuration are done under your
responsibility. In no case shall Sagem Mobiles and/or your network provider be liable for any damages deriving from or arising
out of such changes in the security configuration.
You must be aware that applications downloaded to your phone could cause the phone to perform actions for which you will
be billed, like making calls and sending SMS. Depending on your operator's billing policy, you may also be charged to
download the application because of airtime consumption.
Security considerations
Java™ MIDP technology is an efficient way to provide powerful applications in mobile phones.
All these MIDP 2.0 features cannot be simply exposed to any MIDlet installed in the handset: a careful access control system
is implemented in the device to protect your private data and airtime consumption.
Access controls are gathered in 9 security groups:
- Network access
- Auto invocation
- Phone call
- Local connectivity
- Messaging receive
- Messaging sending
- Read User data
- Write User data
- Multimedia recording
Each of these security groups has one among 5 possible authorizations levels (listed from the more restrictive to the more
permissive):
- Never: The security group completely prevents access to the protected features.
- Per use: Each time MIDlet tries to use protected feature, user is prompted to grant access.
- Per session: First time a MIDlet uses a protected function, user is prompted to grant access like in "Per use" authorization
but access is granted until the MIDlet terminates.
Java™
71
253015633_LU_FCC_my411C_en.book Page 72 Jeudi, 27. septembre 2007 4:40 16
- Single confirmation: The first time in the whole MIDlet life a MIDlet uses a protected feature, user is prompted to grant
access. It remains valid until the MIDlet is removed from the handset.
- Always: The security group unconditionally grants access to protected features.
A MIDlet has a security status which is either "uncertified", or else "certified".
An "uncertified" status means that the source of the MIDlet could not be verified by the mobile phone at installation time. As
far as the phone knows, the MIDlet could have been written by anyone.
A "certified" status means that the MIDlet was digitally signed by a known party, whose name is displayed by the mobile
phone.
Security permissions are different for "uncertified" or "certified" MIDlets.
Security configuration menu
When a MIDlet is installed in the mobile phone, default security authorizations are applied.
This default security configuration may be altered through the "Settings/Security" menu of an installed MIDlet.
Once in the "Security" menu, the security status of the MIDlet is displayed.
If you do not want to enter the security menu, simply select "Back" button. You can proceed by selecting "OK" button.
The menu displayed allows you to increase or decrease permissions currently applied to the current MIDlet for each of the
security groups.
When you set a more permissive authorization to a security group than the current value, mobile phone asks you to confirm
your increased risk exposure.
The maximum risk exposure increase is limited by the security status.
What is Java™?
Business applications and games are easily downloadable by the end-user on a Java™ featured handset.
Your mobile phone is a MIDP 2.0 compliant Java™ platform which implements WMA (SMS support) and MMAPI (Multimedia
support) options, providing an exciting environment to run highly graphical, networked and intuitive MIDP applications.
What is a MIDlet?
A Java™ application or a game designed to run in a mobile phone is named a MIDlet (MIDP applet).
A MIDlet is usually made of 2 files:
- The JAD file
- The JAR file
JAD file stands for Java™ Application Descriptor. It is a small file describing the content of a JAR file.
JAR file stands for Java™ Archive. It refers to the application data themselves (program, images, sound). A JAR file may be
up to 200 kilo-bytes large.
Note: In rare circumstances, MIDlet vendors may provide no JAD file and the MIDlet is the JAR file alone. In such a case it
is your only responsibility to evaluate the risk to download the JAR file without possibility of consulting the JAD file.
72
Java™
253015633_LU_FCC_my411C_en.book Page 73 Jeudi, 27. septembre 2007 4:40 16
Downloading a MIDlet (Java™ game or application)
MIDlets are easily downloaded in the mobile phone through the Games or Applications menus or through the WAP browser.
In almost all cases, you will first receive a JAD file which will be displayed on the screen.
When you select a JAD file, your mobile phone downloads it, displays data contained and prompts you to acknowledge the
JAR file download.
The popup displays information below:
- Name of the MIDlet, Version, Size, Name, Security status, URL.
If you do not want to download the main data (JAR file), you shall refuse to acknowledge further airtime consumption by
selecting "Cancel".
If you agree on the MIDlet installation, just select OK. The MIDlet is installed with security levels set to default values
associated with its security status.
Before downloading an application, such a message may appear: "Your handset cannot identify the application, please be
sure of the source of the application before installing the application".
Trademarks
Java™ and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and
other countries.
Disclaimer
Some downloaded items may contain data or may induce actions which may cause malfunctioning of your mobile phone or
loss or corruption of data or abnormal increase of your airtime consumption.
You expressly acknowledge that the download of any applications including Java™ applications or games is done under your
exclusive responsibility. In no event shall Sagem Mobiles, your network service provider or their affiliates be liable for any lost
profits or costs of procurement of substitute goods or services, loss of profits, interruptions of business, loss of data or for any
special, indirect, incidental, economic, or consequential damages arising under contract, tort, negligence, or other theory of
liability relating to the download of any application by any means, including Java™ applications or games in SAGEM devices.
You expressly acknowledge that any applications including Java™ applications or games are provided strictly "as is".
Sagem Mobiles and/or your network service provider extend no warranty whatsoever thereto. Sagem Mobiles and/or your
network service provider disclaim any express, implied or statutory warranty of merchantability, fitness of any applications
including Java™ applications or games for a specific purpose, satisfactory quality, security or otherwise.
Java™
73
253015633_LU_FCC_my411C_en.book Page 74 Jeudi, 27. septembre 2007 4:40 16
Troubleshooting
The phone won’t start and/or won’t take a charge
The battery has completely lost its charge.
Connect the phone to the charger for between 5 and 30 minutes. The phone will only switch on after it has been charging for
a few minutes.
You may use the phone again when the Start option is displayed on the screen.
If the phone still won't start after 30 minutes’ charging, contact customer service.
SIM not present
Check if the SIM card is present and properly positioned / inserted.
Check the condition of the SIM card. If damaged, please go back to the operator's shop for advice. Contact your after-sales
service if the message persists.
Incorrect PIN code
An incorrect PIN code has been entered. Be careful! Three incorrect PIN codes will block the SIM Card.
SIM BLOCKED
If a wrong PIN number is entered three times in succession, your SIM card is blocked. You must then:
- Enter the PUK (Personal Unblocking Key) code provided by your operator, and validate.
- Enter your PIN number and validate.
- Enter your PIN number again and validate.
After 5 or 10 failed attempts (depending on the type of SIM card), the SIM card is definitely locked. You must then contact
your operator to obtain a new card.
SIM LOCKED
In certain cases, the handset can only be used with some types of SIM cards. This message means that the SIM card you
are using does not fit with the phone. Take the SIM card out, and switch it back on. If the message SIM not present appears
on the screen, you will need to check its compatibility next to the place where you bought it. If not, please contact your
after-sales service.
No call connection
Check that the number you have dialled is correct.
If the letter R is displayed on the top right corner of the screen, without any network name displayed, only emergency services
can be called.
Check the status of your credit.
Check that the SIM Card you are using offers the service you are requesting; check if its validity has not expired.
Check and deactivate the outgoing calls restriction when necessary.
74
Troubleshooting
253015633_LU_FCC_my411C_en.book Page 75 Jeudi, 27. septembre 2007 4:40 16
The network could be saturated. Try later.
If the problem persists, please contact your Technical Helpdesk.
No receiving calls
Try to make a call in order to check that the phone and the network are operational.
Check and deactivate the permanent call forwarding (permanent call forwarding icon displayed on the screen).
Check and deactivate the incoming calls restriction when necessary.
If the problem persists, please contact your Technical Helpdesk.
Quality reception when calling
Avoid placing your fingers on the top of the phone, where the aerial is integrated: the phone will have to use full strength to
establish a quality transmission.
Impossible to send message
Check that the message centre number is correctly entered.
To do so, please select the menu Messages, select Options/SMS, select Msg centre n° and check the number entered.
Please contact your network provider to get this number.
No voicemail
Check that your subscription does offer this service.
Program the call to be forwarded to voicemail using the information provided by the operator.
Try to make a call to check that phone and network are operational.
Check if the voicemail number is properly configured. To do so, go to the Settings/Calls menu, select Voicemail and check
the number. Otherwise, enter your operator’s voicemail number.
Operator name does not appear on screen
Go into the Settings menu, select Networks, then [Select]. Wait until the operator appears, select it and validate.
If the Operator logo is present (depending on model), activate the display (Settings/Operator logo).
Poor screen legibility
To ensure optimal screen legibility, follow the recommendations below:
- check that you have removed the plastic protective film,
- clean the screen of you telephone with a soft dry cloth to remove any finger marks or dust,
- make sure the background brightness is not too strong.
The automatic updating of date and time does not operate correctly
This service depends on your operator and on the information broadcasted on its network. It may broadcast them
continuously, occasionally or it does not offer this service.
For instance, some networks require a GPRS connection for the automatic updating of date and time. This GPRS connection
is identified by a black GPRS icon displayed on the screen.
Please contact your operator, it will confirm you can get this service and will give you all the installation information.
Troubleshooting
75
253015633_LU_FCC_my411C_en.book Page 76 Jeudi, 27. septembre 2007 4:40 16
Index
Accessories
Active flip
Alarm
Anonymous mode
59
38
34
43
Battery
Charging the battery
Installing the battery
Beeps
Bluetooth®
Business card
Calculator
Calendar
Call barring
Calls
Automatic redial
Call divert
Call waiting
Counters
Display number
Camera
Confidentiality
Contact
Call
Delete
Mailing list
Memory
Modify
Contacts
Contrast
76
15
37
14, 19, 26, 30, 34, 36, 40
18
35
34
46
13
44
43
44
43
43
25, 47
46
16, 26
16
18
19
17
17
40
40
Converter
Cost
Currencies
Date / Time
Display
Downloaded objects
Energy saving
Fixed dialling
Games
Getting started
GPRS
Hands-free mode
Help
Icon
Idle screen
Input modes
Languages
Local information
35
47
35
38
39
28
40
46
33
11
32
13
47
10
10
21
37
24
Index
253015633_LU_FCC_my411C_en.book Page 77 Jeudi, 27. septembre 2007 4:40 16
Memory
Messages
Create message
Drafts
Inbox
Outbox
Receiving messages
Sentbox
Templates
MMS
Multimedia
Multimedia objects
Music player
Navigator
Network
Networks
Operator
Operator logo
Organiser
Phone code
Phonebook
New contact
Using the phonebook
Photo
Picture
PIN number
PIN2 number
Ring tones
Index
24
20
22
22
23
22
22
23
20, 26, 36
28
28
30
12
44
46
39
40
45
16
16
25, 40, 47
40
45
45
Safety information
Screensaver
Security
Shortcut keys
Silent mode
SIM card
Skins
SMS
Sound
Speed Dialing
T9
Timer
To Do
ToDo
USB
USB cable
Vibrate
Video
Voice mail
Voicemail
Wallpaper
WAP
Downloading objects
WAP logging off
WAP logging on
Warranty
56
39
45
38
37
8, 11
39
20
40
17
21
34
40
36
19, 34
40
37
25, 27, 40, 47
23
44
39
31, 32
32
32
32
61, 64
37
77
253015633_LU_FCC_my411C_en.book Page 78 Jeudi, 27. septembre 2007 4:40 16
253015633_LU_FCC_my411C_en.book Page 79 Jeudi, 27. septembre 2007 4:40 16
PC software, available as an option:
To exchange data between your mobile phone and your PC:
Pictures, Sounds, Video, SMS, MMS, Contacts, Calendar…
To connect to Internet easily
Using the 3G, EDGE or GPRS networks according to your mobile phone capacities
and your subscription
Bluetooth® (*)
IRDA (*)
USB (*)
For more information or to buy WellPhoneXT
www.wellphone.com
(*) See chapter ”Connectivity”, page 40 to know the compatible links with your phone.
www.sagem.com
Le Ponant de Paris - 27, rue Leblanc - 75015 PARIS - FRANCE
Société Anonyme
Capital 49 353 885 € - 440 349 181 RCS PARIS
09/2007
253015633_LU_FCC_my411C_en.book Page 80 Jeudi, 27. septembre 2007 4:40 16

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2007:09:27 16:44:11+02:00
Create Date                     : 2007:09:27 16:39:22Z
Page Count                      : 80
Creation Date                   : 2007:09:27 16:39:22Z
Mod Date                        : 2007:09:27 16:44:11+02:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : g094216
Metadata Date                   : 2007:09:27 16:44:11+02:00
Creator                         : g094216
Title                           : 253015633_LU_FCC_my411C_en.book
Page Mode                       : UseThumbs
Tagged PDF                      : Yes

EXIF Metadata provided by EXIF.tools