Sagem Wireless D2005AP GSM 850/1800/1900 Mobile Phone with BT User Manual 252485287 my400L my401L lu en
Sagem Wireless GSM 850/1800/1900 Mobile Phone with BT 252485287 my400L my401L lu en
UserManual.wiki
>
Sagem Wireless
>
D2005AP User Manual
User Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![16 DescriptionDescriptionHold down: Switch on/offIn a call context: Reject a call - hang upIn menus: Return to initial screenShort press: Activate/Deactivate hands-free mode (WARNING: in this mode donot bring the phone up to your ear (at least 3.9 inches (10 cm))In call context: Call - receiving a callRight programmable key:In initial screen: Access to certain functions (shortcuts)In menus: Access to the selection shown on screen in the tab (*)(*) In this manual, when a function is chosen by pressing on this key, square brackets areused (e.g.: [Save]).Left programmable key:In initial screen: Access to certain functions (shortcuts)In menus: Access to the selection shown on screen in the tab (*)The four-directional navigation stick allows you to:-Move the cursor on the screen by pushing the stick toward thecorresponding direction-Confirm your selection by pressing the stick-In initial screen: depending on model, long press leftwards/rightwards:access to PhonebookPress briefly and [OK]: activate or deactivate keypad lockingWhen composing a message: Short press: switches from one input mode to another (T9, ABC, 123)Long press: upper case/lower caseHold down: In initial screen: Silent modeIn call reception mode: Short press stops ring toneIn ring tone setting mode: Activate / deactivate ring toneZoom mode (see Messages and WAP menus)2 to 9A long press on the keys 2 to 9 directly displays the phonebook.252485287_my400L-my401L_lu_en.book Page 16 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-16.png)
![22 Activating your phoneGetting startedYou are now ready to use your phone for the first time.Switch on the phone by pressing the key. A short display appears.When you switch on your phone for the first time, you must configure it with various settings that will remain by default untilyou choose to modify them (depending on model).After entering your PIN code and the date and time, make your choice for the following settings: time zone, daylight savings,skin, wallpaper, screensaver, ring tone, volume, vibrate and voicemail number.If there are contacts saved in your SIM card, you are invited, if you wish, to copy them in the phone contacts memory.PIN numberThis is your SIM's secret code.If access to the SIM card is protected, the device prompts you to enter the PIN number:Enter the code between 4 and 8 digits given to you when the SIM card was issued. These digits do not appear on the screenfor security reasons. Press [OK] or the navigation stick to validate. If your phone indicates that the SIM is missing, press the key to switch off your phone and check that the SIM card iscorrectly installed.WARNINGIf a wrong PIN number is entered three times in succession, your SIM card is blocked. You must then:-Enter the PUK (Personal Unblocking Key) code provided by your operator, and validate.-Enter your PIN number and validate.-Enter your PIN number again and validate.After 5 or 10 failed attempts (depending on the type of SIM card), the SIM card is definitely locked. You must thencontact your operator or your SMC to obtain a new card.252485287_my400L-my401L_lu_en.book Page 22 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-22.png)
![24 Activating your phoneCalling voicemailIn the initial screen, press and hold down the 1key.Receiving a callWhen you receive a call, the number of your correspondent is displayed when it is presented by the network.Press the key or the key to answer, and speak.To refuse the call, press the key or the key.To stop the ring tone or the vibrate, without refusing the call, press the key.All the numbers corresponding to incoming and outgoing calls are logged in the list of recent calls.When a call is on hand, pressing [Options] allows you to have access to different functions: switching to hands-free mode,holding a call, switching to mute mode, ending the call, displaying menus.Pressing [Mute ON] allows you to switch off the sound temporarily when you do not want that your correspondent listens whenyou want to speak to other people.Switching offPress the key (long press).The end message is displayed. The phone switches off. International callPress 0 (hold down) to display « + », then dial the country code without waiting for the dial tone, then the number of thecalled party.Emergency servicesDepending on the operators you can obtain the emergency service with or without SIM card or when the keypad islocked. It is enough to be in an area served by a network.To obtain the international emergency service, dial 112 then press the key. Hands-free modeTo change to hands-free mode during a call, make a short press on the key then press [Yes] to confirm activationof the amplified mode.WARNING: in this mode do not bring the phone up to your ear.252485287_my400L-my401L_lu_en.book Page 24 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-24.png)
![Phonebook 27PhonebookUsing the phonebookEnter the Phonebook menu, the contacts list is displayed if you already get some (otherwise, go to Storing a new contact).When a contact is selected, an icon is displayed in the title bar:contact stored in the SIM cardcontact stored in the phonecontact stored in the Fixed Dialling. See PIN2 number and Fixed dialling in Security Menu for more details about thisactivation.You can search for a contact quiclky by typing the first letters (up to three). You can display it by pressing OK.Storing a new contact-Display the Phonebook, press [Options] then select Add phone contact or Add SIM contact.-Enter the last name and press the navigator.-Enter the number and press the navigator (OK).Note: you can fill other fields if you store the contact in the phone memory (email, address, ringtone, photo, etc.).-Press [Save] to store it.Calling a contactSeveral ways:-Select a contact. Press to start the call.-Select a contact, press OK, his number is displayed, press [Call] to start the call.-Direct call from the idle screen (only for the contacts stored in the SIM card memory): type the number with which thecontact was saved then ∗ (example : 21∗) or the number then #, the number is displayed, confirm.252485287_my400L-my401L_lu_en.book Page 27 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-27.png)
![28 PhonebookContact optionsTo display the various options, select a contact and press [Options].Modifying a contactModify what you want and validate then select Save once the modifications completed.Sending a messageTo send a SMS or a MMS to a contact (see chapter Messages).Sending byTo send a contact details by MMS, SMS, IrDA or Bluetooth (depending on model) (see chapters Messages andConnectivity).Copy to SIM/Copy to mobileThis allows you to copy your phonebook contacts from one memory to the other. Only the name and the first phone numberwill be copied.My numbersYou can create the entries corresponding to your own numbers in order to consult them when necessary.Select My numbers and validate. Enter the different details and validate.Mailing listsA mailing list allows you to send a same message to several recipients at the same time. -Select Mailing Lists and press the navigation stick. The phone asks you to confirm the creation of a new list.-Select the list type (SMS or MMS) and press the navigation stick.-Enter a name and press the navigation stick.-Then, on a list press [Options]. Select Add contact each time you want to add a contact in the list.252485287_my400L-my401L_lu_en.book Page 28 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-28.png)
![Phonebook 29MemorySelect SIM or Telephone and validate.Telephone: the screen displays the amount of memory used. The memory capacity is shared between the phonebook andvarious other features. If you lack memory, check if you can free some space.SIM: available memory only for contacts.Delete/Delete allThis allows you to delet the contact selected or all the contacts.Set as my card/Business cardThe details of a contact stored in the phone memory can be saved in a business card.-Select a contact and press [Options].-Select Set as my card and [OK]. The details are saved as Business card. Then you can read it, modify it or send it bySMS, MMS or IrDA.Synchronize (depending on model)You can synchronize your phonebook with your archives stored in your operator’s network depending on the options offeredby your operator.The local synchronisation with your computer is only computer originated, from Wellphone software; you have only to activateinfrared, Bluetooth, or configure your USB connection in your phone.Contacts synchronisation with a computer (depending on model)Install Wellphone, software provided on CD (depending on model), and click on DIRECTSYNC: you can synchronise yourcontacts stored in the phone memory with those of your Lotus Notes™ or Microsoft Outlook™ bases.List choiceThis menu allows you to select the default phonebook (phone, SIM and Phone or SIM) displayed when the phone switches on.252485287_my400L-my401L_lu_en.book Page 29 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-29.png)
![30 MessagesMessagesFrom this menu, you are able to send SMS and MMS. MMS is a Multimedia Message Service, which allows you to encloseaudio files, images and others rich contents to your messages; these messages can even be composed of several slides.MMS are differently invoiced than SMS are. Please contact your network provider to get more information on their cost. This menu has been compiled in collaboration with magic4™.Compose SMSOn the Messages menu, please select the Compose menu and validate. Choose the SMS option.The language used is the one selected on the display of the phone (if the language selected is not compatible with the EasyMessage T9™, the English language will be automatically selected).When typing a text, a counter showing the number of characters deducted is displayed at the top of the screen (dependingon model). This counter is not displayed if an icon or sound is inserted into the SMS.When the text has been entered, [Options] is used to access the functions offered:-Send is used to send the message by entering the correspondent's number or selecting it in the phonebook-ABC mode (see page 32)-123 mode (see page 32)-T9 mode (see page 31)-Save is used to save a draft in memory-Save as Template: allows you to keep as a template a message in order to use it again. -Cancel is used to delete all text entered and quit-Activate/Deactivate Zoom is used to modify size of characters-Activate/Deactivate Silent is used to activate or not the keypad beep when typing the text-Formatting is used to enrich a text-Insert to insert an image or sound into your message (see page 32).252485287_my400L-my401L_lu_en.book Page 30 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-30.png)
![32 MessagesInput modesIn the input screen, the key is used to access other input modes. The modein which you type the text is displayed at the right top of the screen. A short pressof the key switches from one mode to another.The ABC mode is used to write words that do not exist in the dictionary. To geta particular character, please press the corresponding key several times: thecharacters will scroll down on your screen. Mode 123 is used to add numbers. Insert mode is used to add symbols, animations, call group icons and tunes.Images and sounds can be of two types: pre-defined or customized. Pre-definedimages and sounds are smaller, especially suited to exchanging messages.Upper caseA long press of the key will display the next letter in upper case ( icon).Punctuation charactersPunctuation characters are obtained thanks to key1 (except in 123mode), or with the help of Insert mode (fast access bybriefly pressing the key).Accented charactersAccented characters are generated automatically in T9 mode.In ABC mode accented characters are available by pressing the key supporting the non-accented character in succession.Compose MMSOn the Messages menu, please choose the Compose menu and validate. Select the MMS option.When the text has been entered, [Options] is used to access the functions offered:-Insert to insert multimedia objects such as images, animations, sounds and videos into your message.-ABC mode (see page 32)-123 mode (see page 32)-T9 mode (see page 31)-Cancel is used to delete all text entered and quit-Slide… to compose a slideshow of the multimedia objects.-Preview to see a presentation of the multimedia objects.When composing a message:-key:Deletes last letter-key:Message options- key (long press):Zoom mode (changes size of characters)- key (short press):Access to symbol table- key (long press):Upper case252485287_my400L-my401L_lu_en.book Page 32 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-32.png)
![Messages 33Saving the messageSelect Save. It is saved in the Drafts menu.Select Save as Template. It is saved in the Templates menu.Sending the message-Once the text entered, press the navigation stick or press [Options] and select Send.-Enter the receiver’s number (or take it in your phonebook pressing Contacts) and press the navigation stick.You can enter an e-mail address.Note: It is possible that the voice message format (.amr) is not supported by some PC. See your PC provider.WARNING: some message sendings may fail if the message content is too big.In the recipient screen, before typing the recipient’s number, the following options are available:-Editor: this option allows you to modify the text before sending the message.-Contacts: to access the phonebook.-ABC/123: to type either letters or figures.-Add mailing list: this option allows you to select a mailing list to which the message is sent (see chapter Phonebook).Once the number typed, other options are available.Receiving messagesWhen you receive a message, the phone plays the ring tone that you selected, and the message icon comes on thescreen of your phone.If you do not read the messages, this icon remains displayed on the screen. When it flashes, the memory is full.Receiving icons, backgrounds or tunes can take several seconds. An icon is blinking when the download of your message isin progress.Note that you have two different possibilities for receiving MMS: automatically or manually; if « manual mode » is activated,then you will receive only a notification in your Inbox, meaning that a MMS is available on the MMS Server; select Retrievein the options when you want to retrieve the MMS from the server.For more details about automatic and retrieval modes, see « Options » on page 35.Please contact your network provider to get more information on icons, backgrounds or tunes downloading.Received messages are stored in the SIM card or in the phone until you choose to delete them.252485287_my400L-my401L_lu_en.book Page 33 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-33.png)
![34 MessagesInboxOn the Messages menu, please choose the Inbox menu and [Select].Each message shows the presence of any attachments, the time and date the message was received and its size.Messages are listed in chronological order, the latest one being displayed first.The quantity of Not Read and Not Retrieved messages is shown. Not Retrieved and Not Read messages are shown in bold. Select a message and press the navigation stick. Choose one of the options given.Enclosures (pictures or sounds), which you receive, can be extracted in order to be used later on (stored…). You can consult them in the corresponding menus (WAP bookmarks in WAP, ring tones in Sounds, wallpapers in Display).OutboxThis menu displays the messages that have not been sent. You can therefore send them again.SentboxThe Sentbox menu is used to store all your sent messages if you activated the option Store sent messages in the Optionsmenu (see page 35).Too many messages saved will quickly fill up the available memory and no further messages will be received.For each message, its characteristics (shown with an icon) and the time (or date) of sending are displayed on the screen.Select a message and press the navigation stick.Choose one of the options given: Read, Modify, Forward, Delete, Delete all.DraftsWhen you store a composed message, it is stored among the drafts.On the Messages menu, please choose the Drafts menu and press the navigation stick.Select a message and press [Options]. The options are: Delete, Read, Modify, Details.If you select a message and press the navigation stick, you can modify it.If you want to send it, select Modify then press [Options] and select Send.TemplatesWhen composing a message, if you selected the Save as Template option, the template is saved in this menu.The same options as for the drafts are available for the templates.252485287_my400L-my401L_lu_en.book Page 34 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-34.png)
![Messages 35OptionsSeveral sending options are offered.On the Messages menu, please choose Options and [Select].Choose one of the options given: SMS or MMS.The SMS sending options are: message centre number, store sent message, acknowledgment, period of validity (during thatperiod, the network provider will try to send the message), message format.The MMS options are: -Store sent messages: (it is highly recommended that you keep this function deactivated, in order to avoid a full memory),-Retrieval mode: if you are in a poor coverage area, it may be more convenient to choose the manual retrieval mode whichgives you the retrieve later option.-Priority: selection of a priority to send a message.-Request delivery report: request of a delivery report when sending a message.-Period af validity: during that period, the network provider will try to send the message.Advanced settings-Send delivery report: sending a delivery report when receiving a message.-MMS ignore: if you want to deactivate the reception of any MMS in your phone.-MMS server: to select another MMS provider, or set the parameters of a new MMS provider.-Display Bcc: if you want to activate/deactivate this display.-Sender visibility: you choose to display or not your phone number on the receiver’s phone screen, with that message.-Maximal Size: if you want to activate/deactivate the option of maximum size supported for the MMS.MemoryYou may know the memory available for saving messages.On the Messages menu, please select the Memory option and [Select].Choose one of the options given: SMS or MMS.The SMS screen displays the memory available either on the SIM card or on the phone.The MMS screen displays how much memory is used in Kbytes.Local informationThis menu is used to activate reception of local information broadcast by the network.You can choose whether you want to receive this information or not (please contact your network provider).On the Messages menu, please select the Local info. menu and [Select].252485287_my400L-my401L_lu_en.book Page 35 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-35.png)
![36 MessagesCalling Voice MailThis function allows you to call your voicemail.On the Messages menu, please select the Call Voice Mail option and [Select].This number depends on the operator.Mailing listThis menu displays the mailing lists created in the phonebook.To display the different options, press [Options].-Add mailing list: allows you to create a new mailing list.-Modify name: allows you to modify the mailing list name.-Add contact: allows you to add a contact to the mailing list.-Properties: allows you to see the type of mailing list and the number of contacts.-Delete: allows you to delete the mailing list.-Send message: allows you to compose and send a message to the contacts of the mailing list.252485287_my400L-my401L_lu_en.book Page 36 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-36.png)
![Camera 37CameraThis menu allows you to take photos and use them for different purposes. For instance, you can send them toanother phone or an Internet address, store them, use them as wallpapers or screen savers…Taking and saving a photoSettings before taking a photoYou can set the timer, the click sound, the photo format and quality in the Settings/Camera menu.In the screen when taking the photo:-To activate zoom, use the navigation stick upwards or downwards.-To set the luminosity, move the navigation stick leftwards:: cloudy, : very sunny, : low luminosity, : in case of neon or halogen lighting, : to avoid backlighting.To select an effect (sepia, negative or black and white), move the navigation stick rightwards.Other settings (pressing [Options]):-Activate timer: to take a photo with a 5, 10 or 15 second time delay.-Timer duration: to select the timer delay-Click sound: to select the sound you will hear when taking a photo.-Photo format: to select the format in which your photo will be saved-Photo quality: to select the photo quality.Taking and/or sending a picture-Press the navigation stick, the photo is taken and stays on the phone display.Warning: if you press [Back], you will go back to the previous screen and lose the photo you have just taken.-Press the navigation stick if you want to send the photo immediately.-Press [Save] to save your photo and display the different options (see next page).If there is not enough memory to save the photo, a warning message appears, prompting you to confirm whether you wantto go on.Once taken, the photo appears on the phone display. The name is made up with a number.Note: using the camera during a call may disturb the call quality.252485287_my400L-my401L_lu_en.book Page 37 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-37.png)
![Camera 39Taking a videoBefore taking a video, you can set the sound and the video size in the Settings/Camera menuSelect the Camera menu. Choose the Video option and press [Select].Select, if you want, a video size limit, maximum size to send the video by MMS.Press the left key [Record] to record then press again the left key [Stop] when you want to stop recording.Note: the phone automatically stops recording when the maximum size available is reached.Press [Options]: -Play: you can display the video,-Save: then you can save it. Modify the name if you want and pressOK.-Save and Send: you can save and send the video by MMS.Warning: A message informs you that the storing and the compression of the video are in progress. It will take a few seconds. During this time, you have two choices:-either you select [Cancel], the compression is interrupted and when you display the video later, the phone will resume thecompression.-or you select [Hide], the compression is not interrupted and you can use your phone but some functions are not available(taking a video or photo, sending a MMS). See chapter Multimedia/My Videos for the options on a video saved.Note: the videos are saved in the phone with a 3gp format.252485287_my400L-my401L_lu_en.book Page 39 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-39.png)
![40 MultimediaMultimediaAll downloaded objects are stored in the Multimedia menu.My VideosThis menu gives you access to your videos.From the Multimedia menu, please select the My Videos menu and the Select label (left key).The names of the videos stored in memory are displayed on the screen.To play a video, select it and press the navigation stick.To display the different options, press [Options].-Send By: allows you to send a video by MMS, IrDA or Bluetooth (depending on model).-Rename: to modify the name of the video.-Properties: properties of the video selected.-Delete: to delete the video.-Delete all: to delete all the videos.-New video: allows you to take a new video.Thanks to My Pictures And Sounds (MPAS) software available from www.planetsagem.com, you can import videos (.3gpformat) or export videos (MPAS converts .3gp format into mpeg4 format readable on PC). 252485287_my400L-my401L_lu_en.book Page 40 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-40.png)
![Multimedia 41My PicturesThis menu gives you access to the pictures you have downloaded.On the Multimedia menu, please select the My Pictures menu and [Select].PlanetSagem: to have access to the web site to download pictures. Select [Options] allows you to delete all the pictures orto take a new photo.On a picture selected, you can press [Options] to have access to these various options:-Send By: allows you to send a picture by MMS, IrDA or Bluetooth (depending on model).-Editor: (see chapter Camera).-Use as: allows you to use the picture as a wallpaper or screen saver.-Rename: allows you to rename a picture.-Properties: properties of the picture selected.-Delete: allows you to delete a picture.-Delete all: allows you to delete all pictures.-New photo: allows you to take a new picture.You can import or export pictures to or from a computer using My Pictures And Sounds (MPAS), available fromwww.planetsagem.com.My SoundsThis menu gives you access to the sounds you have downloaded or recorded.On the Multimedia menu, please select the My Sounds menu and [Select].PlanetSagem: to have access to the web site to download sounds. Select [Options] allows you to delete all the sounds orto record a new sound.To display the different options, press [Options].-Send By: allows you to send a sound by MMS, IrDA or Bluetooth (depending on model).-Use as: allows you to add a sound to the ring tones list.-Rename: allows you to rename a sound.-Properties: properties of the sound selected.-Delete: allows you to delete a sound.-Delete all: to delete all the sounds.-New Sound: allows you to record a new sound.You can import or export sounds to or from a computer using My Pictures And Sounds (MPAS), available fromwww.planetsagem.com.252485287_my400L-my401L_lu_en.book Page 41 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-41.png)
![42 MultimediaMemoryThis menu indicates the memory size used by the different features of your phone.On the Multimedia menu, please select the Memory menu and [Select].Use the navigation stick to select the different features using memory. You can see the memory capacity used by eachindividual feature.252485287_my400L-my401L_lu_en.book Page 42 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-42.png)
![WAP 43WAPWAP (Wireless Application Protocol): a protocol that translates the Internet language into WML and HTMLlanguages that can be read by a phone. The WAP function allows you to log onto certain Internet sites. You can log onto sitesthat allow you to download ringtones, icons, animated screensavers, Java™ applications to your phone.The WAP MenuThe Services menu, a dropdown menu, can be accessed at all times whennavigating through WAP pages pressing the key.It contains the following sub menus:Previous: this menu allows you to come back to the previous screen.Welcome: logs onto the home page (carries the name of your access provider)Bookmarks: is used to save in a phonebook the names and addresses ofInternet sites in order to make the access easy.You can receive bookmarks from messages and add them to this list (see chapteron SMS).You can also send messages by SMS: select a bookmark, press [Options], thenselect Send by message.Go to URL: this menu allows you to input an Internet address directly.Inbox: this menu allows you to check the messages sent by the Internet site.Save Objects: is used to save a WAP site items.Snapshots: takes a snapshot of the currently displayed page.Save Page: saves the currently displayed page.History: backward and forward navigation of the pages displayed are kept inmemory.Reload: refreshes the current page.Reset cache: clears the stored information on previous connections.The WAP navigator is under licence:The WAP navigator and the softwaresincluded are the exclusive property ofOpenwave. For this reason, it isforbidden to modify, translate,disassemble or even decompile all orpart of these softwares.You can activate the magnifyingglass to increase the size of thecharacters by holding down thekey.252485287_my400L-my401L_lu_en.book Page 43 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-43.png)
![44 WAPAdvanced…: choose one of the following advanced settings-Settings-Show URL-Disconnect-Security (is used to access information on making WAP connections secure). -Delete Cookies-View TitleAbout…: information on the browser.Exit: returns to the phone's home page. Configuring WAP parametersSelect the Advanced… menu, then the Settings menu.Profiles is used to select or modify your access provider's logon parameters or configure the parameters of other accessproviders.The active profile is preceded with a star.The Menu is used to add a new profile or to display the memory size available.Configuration of GSM and GPRS parameters:All information to be entered in the parameters are provided by your operator or access provider.On a profile in the list, press [Options], select Modify. The different parameters are: Provider title, Home page, Preferredconnections (see next page), GSM parameters and GPRS parameters (see next page).Preferred connections:-GSM if not GPRS (by default): the logon to WAP services uses the GPRS as a priority. However, in the event ofunavailability of the GPRS network, the GSM network is used to establish the link. -GPRS: the logon to WAP services uses the GPRS network exclusively.-GSM: the logon to WAP services uses the GSM network exclusively.GSM parameters:-Login-Password-IP address of WAP gateway-Port type (secure or insecure)-Dial-up number-Mode (digital, analog or automatic)252485287_my400L-my401L_lu_en.book Page 44 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-44.png)
![WAP 45GPRS parameters:-Login-Password-IP address of WAP gateway-Port type (secure or insecure)-APN: if no APN has been defined, press [Options] then the APN menu. Select or add an APN.Once all the settings have been entered, you can activate the chosen access provider. Select him from the list. Validate yourchoice.Linger timer is used to choose the time after which the call is automatically disconnected if you have forgotten to log off froma service.WAP Logging onThe connection to a WAP service on the GPRS network is not cut if an incoming call is received. You can answer the call.Using the Welcome menu, you can log onto your access provider's WAP site by pressing the key.If you are logging onto the GSM or GPRS network, the @ symbol flashes, the metering of the cost of the call starts as soonas it stops flashing.Downloading objectsSome WAP sites allow you to download ringtones, icons, animated screensavers, games or Java™ applications. Oncedownloaded, they are stored in your phone's memory. You can then save them in your phone (same operation as used fordownloading using messages).WAP Logging offTo log off, press the key. The logoff happens automatically after a few seconds of inactivity if you forget to log off. Thisperiod is defined by the linger time setting.GPRSA flashing icon indicates that the phone is logging onto a GPRS network. A non-flashing icon indicates that the GPRS network is available; if the icon is dark, it indicates that the phone is logged ontothe GPRS network: see page 44 for the attachment options.This icon is not displayed if the GPRS network is not available or if the SIM card inserted in your phone does not include theGPRS service. It may also disappear when accessing WAP services if the connection uses the GSM network instead of theGPRS network.252485287_my400L-my401L_lu_en.book Page 45 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-45.png)
![46 GamesGamesYour phone contains one or several games, depending on model.You can download more (depending on model). You are the owner of a SAGEMmobile phone which gives you the ability to download applications and games tobe executed on your phone thanks to the built-in Java™ engine.However, receiving applications from everywhere implies some basic knowledgeof the possible effects of such download.We advise you to download certified games or applications from your operatorsites or from www.planetsagem.com.By default, the connection URL of your operator or of PlanetSagem is configuredin your phone.If no connection URL is configured, by selecting the More games menu(depending on model), you display the WAP function to configure new profileswhich allow you to download games or applications.When you select a game or an application, the General Settings/Connectionmenu (displayed with [Options] key) allows you to configure a profile which onlybe used by the game or application to connect to the network (to exchangescores for example) but is not used to download new games or applications.252485287_my400L-my401L_lu_en.book Page 46 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-46.png)
![48 ApplicationsSending a vCalYou can send a vCal from each diary event. Yet, this function is available only on certain models of phone.You can send vCals to another phone using MMS or IrDA depending on your phone and the recipient’s phone.On the See today list, please select an event and in theTodo event actions menu list, select Send.Then choose between MMS, IrDA or serial link for the type of sending and confirm.For MMS deliveries, you should in addition select your contact information (phone number or Email address) beforeconfirming.If you receive a call while you are sending a vCal, the call will have precedence.Receiving a vCalThe vCal receipt mode differs with the type of delivery:-By MMS, you receive a message you have to open to extract the vCal. You cannot add the event to your diary until youhave saved it.-By IrDA or serial link, you receive a message and when the download is completed, a message appears on your phonedisplay, asking you what you want to do with the vCal (save it, delete it…).You can assign a different beep to each diary event.You can also assign a different ring tone to each diary event category.CalculatorThis menu allows you to use your phone as a calculator.On the Applications menu, please select the Calculator menu and [OK].Use the navigation stick to make calculations:-Upwards: Add-Downwards: Subtract-Rightwards: Multiply-Leftwards: DivideThe following keys are used for:-: Equals or convert-: Delete- : Decimal point.If no calculations are being run, pressing [Convert] allows you to use the value in the converter directly.252485287_my400L-my401L_lu_en.book Page 48 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-48.png)
![Applications 49ConverterThis menu allows you to convert one currency to another.On the Applications menu, please select the Converter menu and [OK].Enter a value and move the navigation stick upwards to convert from one currency to another, or downwards to convert back.Pressing [Options] allows you to use the following options:Rapid exchangeIf the Rapid exchange is activated, the converter will work in the initial screen by entering the desired numbers and pressingthe navigation stick to convert.Exchange rateEnter the exchange rate corresponding to the chosen currency.CurrencyEnter the two types of currency to be converted.Go to calculatorThis option allows you to use immediately the value converted in the calculator.AlarmThis menu allows you to set and activate the alarm.On the Applications menu, please select the Alarm menu and [OK].Activate or Deactivate the alarm and validate.Set the wake-up time by entering the numbers directly and validate. The alarm icon appears on the initial screen.The alarm works even when the phone is switched off.TimerThis menu is used to set and activate the timer.On the Applications menu, please select the Timer menu and [OK].Activate or Deactivate the alarm and validate.Set the duration (hours/minutes) by entering the numbers directly and validate. The alarm icon appears on the initial screen.252485287_my400L-my401L_lu_en.book Page 49 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-49.png)
![50 ApplicationsToDoThis menu allows you to add ToDo’s, access category-based Todo management and delete all the ToDo’s.On the Applications menu, please select ToDo and press [OK].Select one of the actions in the list with the navigation stick and validate.-Add Written ToDo/Add Vocal ToDo: allows you to add ToDo of the text or voice type. Fill in the different items. Save theToDo.-Categories: allows you to see the different ToDo categories, assign a specific ring tone to each individual ToDo, know thenumber of ToDo’s in each category and see them.-Memory: allows you to view the memory used by the different functions of your ToDo.-Synchronize (depending on model): allows you to synchronise a ToDo with a computer.ToDo actions menuThis menu allows you to do all the actions possible on any ToDo.On the Applications menu, please select ToDo.To display a ToDo, select it in the list and press the navigation stick.To display the different options, press [Options].-Modify ToDo: allows you to modify the ToDo properties.-Delete: allows you to delete the ToDo.-Send By: allows you to send the Vcalendar corresponding to the task by MMS, IrDA, Bluetooth (depending on model).-Delete all: allows you to delete all the ToDo’s from your ToDo.Sending a vCalYou can send a vCal from each Todo task. Yet, this function is available only on certain models of phone.You can send vCals to another phone using MMS or IrDA depending on your phone and the recipient’s phone.On the task list (Todo main menu), please select a task and in the Todo task actions menu list select Send.Then choose between MMS or IrDA for the type of sending and confirm.When sending MMS, please select your contact information (phone number or Email address) before confirming.If you receive a call while you are sending a vCal, the call will have precedence.252485287_my400L-my401L_lu_en.book Page 50 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-50.png)
![52 SettingsSettingsSoundsVolume and ring toneThis menu allows you to allocate a ring tone to different functions.On the Sounds menu, please select the Ring tones menu and [Select].Select the function on which you want to choose a ring tone.Select the ring tone from the proposed list and validate.PlanetSagem: to have access to the web site to download sounds.Note: in the list, there are the phone default ring tones and also the ring tones downloaded in Multimedia/My Sounds.Adjust the volume using the navigation stick and validate.You can deactivate the sound by pressing the key.VibrateThis menu allows you to activate the vibrate mode for calls. On the Sounds menu, please select the Vibrate menu and [Select].Select the vibrate mode from the proposed choices and validate.Silent modeThis menu allows you to switch to Silent mode.On the Sounds menu, please select Silent mode and [Select].Activate or deactivate Silent mode and validate.Silent mode can also be accessed via the initial screen by holding down the key. When the phone is in silent mode, the relevant icon appears on the initial screen. In this mode, the ring tone will not function, except for the alarm clock.Note: if you have activated the silent mode, it does not remain after switching off your phone.252485287_my400L-my401L_lu_en.book Page 52 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-52.png)
![Settings 53BeepsThis menu allows you to activate a beep for the battery, the keypad or the network.On the Sounds menu, please select the Beeps menu and [Select].Select the type of beep you want to allocate from the proposed choices and validate. Activate or deactivate the beep andvalidate.If you select keypad beeps, different options are given.RecorderThese menu allows you to record you own melody.On the Sounds menu, please select the Recorder menu and [Select].Pressing [Start] record your melody or your voice by means of the microphone then save it.Give it a name and validate. The new tone is saved in the list of ringtones and in Multimedia/My Sounds.If you select the recorder by means of a programmable key, the sound is saved in the Applications/ToDo menu.DisplayThis menu allows you to customize your screen by choosing a different presentation.SkinsThis menu allows you to choose the skin of your phone, i.e. define its look (text font, colors, default animation, backgroundimage…).On the Display menu, please select Skins.Select the desired skin and validate.Skins are not downloadable but you can download screensavers and boot mode animations without changing those includedby default with the skin.252485287_my400L-my401L_lu_en.book Page 53 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-53.png)
![54 SettingsWallpaperThis menu allows you to display the background picture you want on your phone.On the Display menu, please select the Wallpaper menu and [Select].Select the wallpaper and [View]. The picture appears in the background of the screen.PlanetSagem: to have access to the web site to download pictures.Note: there are the phone default wallpapers and also the pictures downloaded in Multimedia/My Pictures.Press [OK] to validate this choice, or [Back] to go back to choice.Note: the Random option allows you to display a wallpaper scrolling different pictures in a random way.ScreensaverThis menu allows you to display an animation when the phone is in standby mode.On the Display menu, please select the Screensaver menu and [Select].Select one of the screensavers given and [View].-No screensaver: select Normal screen.-Several wallpapers in a random way: select Slide show.PlanetSagem: to have access to the web site to download pictures.Note: there are the phone default screensavers and also the pictures downloaded in Multimedia/My Pictures.The chosen screensaver appears on the screen, validate it.Operator logoThis menu allows you to display your operator's logo on the initial screen.On the Display menu, please select the Operator logo menu and [Select].Select Activate or Deactivate and press [OK].ContrastThis menu is used to adjust screen contrast.On the Display menu, please select the Contrast menu and [Select].Adjust the contrast using the navigation stick.252485287_my400L-my401L_lu_en.book Page 54 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-54.png)
![Settings 55Energy savingOn the Display menu, please select the Energy saving menu and [Select].Two options are available to choose from for the backlight: -Screen only: only the screen is lit up.-Full backlight: both the screen and the keypad are lit up.Note: in any case, after a certain time of inactivity, the backlight will be automatically turned off to save battery life.After a longer period of inactivity, the screen will enter an economy mode where the time is displayed. To quit this sleep modeand resume backlight, press the key.CameraThis menu allows you to set the camera features of your phone.On the Settings menu, please select the Camera menu and [Select].-Timer: this menu enables you to take a photo with a 5, 10 or 15 second time delay.-Click sound: This menu allows you to select the sound you will hear when taking a photo.-Photo format: This menu allows you to choose the format in which your photo will be saved. -Photo quality: This menu allows you to select the photo quality.-Video Size restriction: This menu allows you to choose a video size.-Video Sound: This menu allows you to select or not the sound when recording a video.LanguagesThis menu allows you to choose your phone's display language.On the Settings menu, please select the Languages menu and [Select].Select your language and validate.If you select Automatic, the language used will be the one relative to your SIM card.ContactsThis menu allows you to select the way to sort contacts in the phonebook (by name or first name) and the filter applied on thecontacts list display (SIM contacts, phone memory or both).252485287_my400L-my401L_lu_en.book Page 55 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-55.png)
![56 SettingsCallsThe Calls menu allows you to manage all the calls functions (call forward, displaying numbers, call waiting, voicemail number,etc.).Call forwardDepending on your subscription, this service allows you to forward incoming calls to a different number or to the voice mailbox.On the Calls menu, please select the Call forward menu and [Select].Choose the type of forwarding you want from the options available.View last callsThis menu allows you to access the list of last numbers used.On the Calls menu, please select the View last calls menu and [Select].For every phone call are displayed on the screen:-its characteristics (shown with an icon),-the time (or date),-its duration.Select a call from the list and validate.Select one of the options given: Call, Store in your phonebook, Send a message, Delete, Delete all.You can also make the call by pressing the key.Fast access to the list of calls from the initial screen: press the key.CountersThis menu allows you to consult the duration of the up calls.It can also be used to check the volume of data exchanged in GPRS.On the Calls menu, please select the Counters menu and [Select].Select one of the options given.Display numberThis menu allows you to modify the status of the display number function.On the Calls menu, please select the Display number menu and [Select].Select one of the options given: Anonymous mode, My number, Callers’ number.252485287_my400L-my401L_lu_en.book Page 56 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-56.png)
![Settings 57Anonymous modeYou have the facility to mask your number on the phone of the person you are calling.-Preset: network default mode.-Yes: you choose to active anonymous mode and then not to display your number.-No: you choose not to activate anonymous mode and then to display your number.Call waiting(Operator-dependent service). During a call, you may be informed that a caller is trying to reach you: you hear a special tone.The caller's identity is displayed on the screen (name or number).On the Calls menu, please select the Call waiting menu and [Select].You can activate, deactivate, or consult the status of the call waiting service in order to check if it is active or not. During a call, if a second caller tries to contact you, the screen displays the call warning. Automatic redialThis menu allows you to call back a caller you have not managed to reach.On the Calls menu, please select the Auto redial menu and [Select].You can set the redial function to inactive, on request or systematic.If you choose On request, your phone will offer to redial your caller automatically if his number is busy.BlacklistThe blacklist is used to limit failures on automatic calls (calls generated by the automatic redial function or by applications:data, fax for example).On the Calls menu, please select the Blacklist menu and [Select].When several automatic calls failed with a number (number busy or unknown), this number is put in the blacklist and noautomatic call will be done with this number any more until you delete it from the blacklist.Note: this function does not apply to the calls performed manually.VoicemailThis function is used to record your answer phone number.This number will be used during a call to the voice mailbox using the programmable keys.On the Calls menu, please select the Voicemail menu and [Select].Enter your answer phone number and validate.252485287_my400L-my401L_lu_en.book Page 57 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-57.png)
![58 SettingsALSThe ALS (Alternate Line Service) function allows you, depending on your subscription, to have two phone lines.The number of the line selected (1 or 2) for the calls appears on the initial screen.SecurityThis menu allows you to configure your phone's security settings.Keypad lockingThis menu allows you to lock the keypad to avoid unwanted key presses.On the Security menu, please select the Keypad locking menu and [Select].Select Activate or deactivate and validate. The lock icon appears on the initial screen.This function is also available in the initial screen pressing the key and the navigation stick.PIN numberThis menu allows you to activate and modify your phone's PIN.On the Security menu, please select the PIN number menu and [Select].To modify the PIN, select Modify PIN and [Select].Enter old PIN and validate.Enter new PIN twice and validate.To activate or deactivate the PIN, select the Control PIN menu and [Select].Enter PIN and validate. Select Activate or Deactivate and validate.PIN2 numberYou have a second PIN number to allow you to access certain functions*.* These functions may or may not be available depending on your SIM card.Proceed as above in order to activate, deactivate or modify PIN number 2 of your phone.252485287_my400L-my401L_lu_en.book Page 58 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-58.png)
![Settings 59Phone codeThe Phone code menu allows you to activate the phone code so that it is requested and checked whenever the phone isswitched on if a different SIM card is used. This code is automatically linked to the SIM card installed when the phone isactivated, for example to protect the phone if stolen.To activate or deactivate the phone code, select the Phone code menu and validate. Enter 0000 (the factory code, by default) and validate. Select Activate or Deactivate and validate.To modify the phone code, select Modify and validate.Enter old phone code and validate.Enter new phone code and validate.Enter phone code again to confirm it and validate.ConfidentialityThe Confidentiality function is used to delete last call numbers, messages or organiser events when a new SIM card isinserted into the phone.This menu allows the activation of automatic deletion, after power off/on, for messages and/or calls stored in the phone.On the Security menu, please select the Confidentiality menu and [Select].Select Activate or Deactivate and validate.OperatorThis menu allows you to modify the call barring.On the Security menu, please select the Operator menu and [Select].Access to this service depends on your type of subscription.Call barringCall barring can be applied to ALL calls (incoming and outgoing), to all incoming calls when you are away from your homecountry (if roaming available).This menu allows you to block the sending or reception of certain calls.Before you can use this service, a password will be provided by your operator when you take out your subscription.On the Security menu, please select the Call barring menu and [Select]. Select Activate or Deactivate and validate.Access to this service depends on your subscription type.252485287_my400L-my401L_lu_en.book Page 59 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-59.png)
![60 SettingsFixed diallingThis menu allows you to restrict the outgoing calls. The availability of this menu depends on your SIM.On the Security menu, please select the Fixed dialling menu and [Select].Enter PIN2 number and validate.Select Activate or Deactivate and validate.Proceed as for any other phonebook.When activating this function, only the numbers stored in the phonebook can be called.This phonebook is linked to the SIM card, and its size depends on the card's capacity.CostThis menu allows you to control the cost of your calls (*). (Operator-dependent service).On the Security menu, please select the Cost menu and validate.The Cost menu (*) lets you check the cost of the last call you made and of all the calls you made since you last deleted them.The Delete costs menu (*) lets you delete the cost of your last call and reset the cost counter after entering your PIN 2 code.(*) WARNINGDepending on how the networks and associated subscription cards are configured, some functions may be unavailable (theseare marked out with *).NetworksThis menu allows you to configure network preferences.On the Settings menu, please select the Networks menu and [Select].Choose Selection to activate (automatically or manually) one of the networks accessible in the area in which your are located.Choose Preferred to view all the pre-registered networks.Choose Network type to select your network: GSM-DCS or PCS (depending on model).Choose GPRS to select the way you want to be attached on the GPRS network: always, or only when needed (whenlaunching a data connection).252485287_my400L-my401L_lu_en.book Page 60 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-60.png)
![Settings 61ShortcutsThis menu allows you to customize the settings of your phone to make it as convenient as possible for you to use.(Function available depending on model)This menu allows you to allocate functions to the programmable keys: .On the Settings menu, please select the Shortcuts menu and [Select].Select the key that you wish to modify and validate.Choose the function that you want to allocate to this key and validate.Date / TimeSet Date/TimeThis menu allows you to set the date and time of your phone.On the Date / Time menu, please select Set Date/Time and [Select].Date: set the date by entering it directly in digital form or by using the navigation stick.Use the navigation stick to access the next (or previous) entry field.Once the date is correct, validate it.Time: same procedure as for setting the date. Automatic updateThis menu allows you to choose manual or automatic updating of date and time (after switch off of your phone or when goingabroad for instance) (service depending on the operator).From the Date / Time menu, please select Automatic upd. and [Select].Please select Automatic, Manual or On demand and press [Select].252485287_my400L-my401L_lu_en.book Page 61 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-61.png)
![62 SettingsDisplayThis menu allows you to select the date and time display type.On the Date / Time menu, please select Display and [Select].In the list that appears, select the desired display type between:-Digital,-None,-Analog,by using the navigation stick and validate.Time zoneThis menu allows you to change time in relation to the GMT time.On the Date / Time menu, please select Time zone and [Select].Choose the time of the country desired by calculating the time from the GMT time.Daylight savingsThis menu allows you to set your phone to the summer/winter time.On the Date / Time menu, please select Daylight savings and [Select]. Select 1 h, 2 h Summer time or Winter timedepending on the season, and validate.WAP settingsThis menu allows you to set various parameters needed for WAP connection.On the Settings menu, please select WAP settings and [Select].You can add or modify URL addresses.HelpThis menu allows you to activate or deactivate the display of the help in the phone.252485287_my400L-my401L_lu_en.book Page 62 Mardi, 24. janvier 2006 9:23 09](https://usermanual.wiki/Sagem-Wireless/D2005AP/User-Guide-624029-Page-62.png)
