Sagem Wireless DX07S1 Mobile Phone User Manual
Sagem Wireless Mobile Phone Users Manual
Users Manual
252926853_my411X_FCC_en.book Page 1 Jeudi, 19. juillet 2007 1:28 13
252926853_my411X_FCC_en.book Page 2 Jeudi, 19. juillet 2007 1:28 13
3
You have just purchased a SAGEM phone. We congratulate you! In order to use your phone efficiently and safely, we
recommend that you read this handbook carefully.
Your phone can be used internationally in the various networks (GSM 900 MHz, DCS 1800 MHz or PCS 1900 MHz)
depending on the roaming arrangements with your operator.
Some services described in this guide may not be available from the network or when roaming, or may require a specific
subscription.
Remember to back up your data and programs frequently, and before sending the mobile phone for repair.
This phone, like any other wireless phone, operates using radio signals and networks. Connection in all locations and
conditions cannot be guaranteed. Therefore you should never rely solely on any wireless phone for essential communications
(for example, medical emergencies).
In some jurisdictions it may be unlawful to take a picture without notice to or the consent of all participants.
Depending on the model, network configuration and associated subscription cards, certain functions may not be available.
Your phone is identified by its IMEI number. Write this number down, and do not keep it with your phone, because you may
be asked for it in the event of your phone being stolen, in order to prevent it from being used, even with a different SIM card.
In order to display the IMEI on your phone’s screen, type: *#06#.
SAGEM is a trademark of Sagem Communication, SAFRAN group.
T9® Text Input is a trademark of ©Tegic Communications Inc.
Java™ and all Java™ based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the
U.S. and other countries.
The WAP navigator and some message softwares (i-mode) are under licence Openwave.
The WAP navigator and the softwares included are the exclusive property of Openwave. For this reason, it is forbidden to
modify, translate, disassemble or even decompile all or part of these softwares.
The
®
word mark and logos are owned by the
®
SIG, Inc.
microSD™ is a trade mark of SD Card Association.
Wellphone™ and SmartCom™ are registered trademarks owned by SmartCom SARL France.
Windows is a trademark of Microsoft Corporation.
252926853_my411X_FCC_en.book Page 3 Jeudi, 19. juillet 2007 1:28 13
4Contents
Installing the SIM card and the battery ........... 8
Inserting the memory card .............................. 9
Using the memory card................................... 9
Information on the SIM card .........................11
Getting started ..............................................11
Switching ON/OFF........................................12
Network......................................................... 12
First call ........................................................13
Receiving a call............................................. 13
Improving antenna performance...................14
Increase the battery life of your phone .........14
Charging the battery .....................................15
Using the phonebook....................................16
Storing a new contact ...................................16
Calling a contact ...........................................16
Contact options.............................................17
Mailing lists ...................................................18
Creating a text message...............................19
Saving the message .....................................20
Sending the message ................................... 20
Receiving messages..................................... 20
Messages menu ...........................................21
Taking and saving a photo ........................... 24
Taking a video .............................................. 26
Creating a playlist......................................... 28
Playing your music ....................................... 29
The WAP Menu ............................................ 30
WAP Logging on........................................... 31
Downloading objects .................................... 31
WAP Logging off........................................... 31
GPRS ........................................................... 31
Alarm ............................................................ 33
Applications .................................................. 33
Timer ............................................................ 33
Calendar....................................................... 33
Calculator ..................................................... 34
ToDo............................................................. 35
Services........................................................ 35
Phone ........................................................... 36
Connectivity.................................................. 38
Display.......................................................... 40
Messaging .................................................... 42
252926853_my411X_FCC_en.book Page 4 Jeudi, 19. juillet 2007 1:28 13
Contents 5
Calls .............................................................. 42
Networks ....................................................... 43
Security ......................................................... 44
Browser.........................................................46
Multimedia.....................................................46
Help...............................................................46
FCC Part 15 statement .................................48
FCC SAR information ...................................49
Safety Information.........................................50
Distance of operation ....................................51
FDA consumer information on wireless
phones ..........................................................51
Driving safety tips..........................................54
CE conformance statement ..........................55
CE SAR information......................................56
Safety information .........................................57
Distance of operation ....................................58
CE Environment............................................58
Limited Warranty...........................................60
Warranty .......................................................63
252926853_my411X_FCC_en.book Page 5 Jeudi, 19. juillet 2007 1:28 13
6Description
: Hold down: Switch on/off.
Reject a call - hang up
Return to idle screen.
: Short press: Activate/Deactivate hands-free mode
(
in
this mode do not bring the phone up to your ear (at least 3.9 inches (10 cm))
Call - receiving a call
(Function available depending on model)
Access to certain functions (shortcuts)
Access to the selection shown on screen in the tab (*).
(Function available depending on model)
Access to certain functions (shortcuts)
Access to the selection shown on screen in the tab (*).
The navigator allows you:
-to navigate in the various functions pressing the relevant part
-to confirm your selection pressing the central part ( ).
In idle screen, pressing displays the main menus icons.
Pressing followed by one of the nine keys of the keypad, you can display
a menu directly.
the phone menus being numbered, you can directly access a menu
typing the various numbers.
: short press and : activate/deactivate the keypad locking.
Long press: switches from one input mode to another (ABC/T9)
Short press: upper case/lower case/figures
Hold down: Silent mode. Short press
stops ring tone. Activate / deactivate ring tone
Stops sound in video or message playing, or in a game
A long press on the key calls voicemail (if the number has been stored in
/ / menu)
A long press on the keys to directly displays the phonebook
252926853_my411X_FCC_en.book Page 6 Jeudi, 19. juillet 2007 1:28 13
Description 7
Camera lens
-Short press: Set the volume
-Long press: Change to the next or previous
music track
-Deactivate the silent mode (if activated).
When listening to music:
-From the idle screen:
•Short press: access to Music player
•Long press: access to Music player and
start playing
-From the Music player menu:
•Short press: play/pause music
252926853_my411X_FCC_en.book Page 7 Jeudi, 19. juillet 2007 1:28 13
8Description
Depending on the model, network configuration and associated subscription cards, certain functions may not be available.
Your phone is identified by its IMEI number. Write this number down, and do not keep it with your phone, because you may
be asked for it in the event of your phone being stolen, in order to prevent it from being used, even with a different SIM card.
In order to display the IMEI on your phone’s screen, type: *#06#.
Ensure that the phone is switched off and the charger disconnected.
1Open the back cover using the notch located at the bottom of the phone. Take out battery if already installed.
2Slide the SIM card into the card holder with fold face down and cut corner as shown in the figure below.
3Place the battery by positioning first the top of it, as shown on the battery.
4Place the back cover, clicking in first the upper part then the lower part.
252926853_my411X_FCC_en.book Page 8 Jeudi, 19. juillet 2007 1:28 13
Description 9
The memory card is inserted under the phone’s battery.
-Switch off your phone.
-Remove the back cover.
-Remove the battery.
-Lift the flap. Insert the memory card.
-Close the flap and replace the battery.
-Replace the battery.
The memory card is very fragile. Take care when you insert or remove the memory card.
Some memory cards must be formatted with a PC before first use with the phone.
252926853_my411X_FCC_en.book Page 9 Jeudi, 19. juillet 2007 1:28 13
10 Idle screen
The idle screen may contain the following information:
Battery (if it flashes red, the battery must be charged immediately)
Silent mode (the ringtone is off)
Only emergency call is possible
Signal strength level (between 0 and 5 bars)
Message received (read your message), flashing: memory full (delete some messages)
Grey: GPRS unavailable
Black: GPRS connection
Flashing: GPRS connection on hand
WAP connection
The main « Menu » thumbnail shows that the menus can be accessed by pressing .
Information messages on calls, messages or network messages received may also be displayed. They can be deleted by
pressing key briefly.
252926853_my411X_FCC_en.book Page 10 Jeudi, 19. juillet 2007 1:28 13
Quick start 11
To use your phone, you need a card called SIM card. It contains personal
information that you can modify:
-Secret codes (PIN(s): Personal Identification Numbers), these codes allow
you to protect access to your SIM card and phone
-Phonebook
-Messages
-How special services work.
When you switch on your phone for the first time, follow instructions displayed on the screen.
If access to the SIM card is protected, the device prompts you to enter the PIN number:
Enter the code between 4 and 8 digits given to you when the SIM card was issued. These digits do not appear on the screen
for security reasons.
After pressing [ ], the phone activates the SIM card settings and switches on again ; enter your PIN code again then the
date and time, make your choice for the following settings: time zone, daylight savings, skin, wallpaper, screensaver, ring
tone, volume, vibrate and voicemail number.
This card must be handled and stored with care in order not to be damaged. If you should lose your SIM card, contact
your network provider immediately.
Please keep your SIM card out of reach of young children.
252926853_my411X_FCC_en.book Page 11 Jeudi, 19. juillet 2007 1:28 13
12 Quick start
When your phone is off, a short press on will turn it ON.
When the phone is ON, if your are browsing inside the menus, a short press on will come back to the idle screen. When
you are in the idle screen, a long press on will switch OFF the phone.
From now on the phone searches for a network on which it can make calls. Once registered onto a network, it displays the
name of the network on the screen. You are then ready to send or receive a call.
If a wrong PIN number is entered three times in succession, your SIM card is blocked. You must then:
-Enter the PUK (Personal Unblocking Key) code provided by your operator, and validate.
-Enter your PIN number and validate.
-Enter your PIN number again and validate.
After 5 or 10 failed attempts (depending on the type of SIM card), the SIM card is definitely locked. You must then
contact your operator to obtain a new card.
If the network’s name appears, calls are possible on your operator's network.
If the letter and a network name are displayed, calls are possible on a roaming network provider.
If the letter is displayed without any network name, only the emergency services are accessible (ambulance, police,
fire brigade).
If the network icon flashes, the phone is in permanent search mode. There is no network available. The signal strength
indicator received allows you to display the quality of reception. If it indicates less than three bars, search for better
reception in order to call in good conditions.
252926853_my411X_FCC_en.book Page 12 Jeudi, 19. juillet 2007 1:28 13
Quick start 13
Dial the number you want to ring.
Press .
During the call, the call in progress icon flashes on screen and tones may indicate the establishment of the call.
While a call is connecting, the phone icon is flashing.
You can adjust the sound level by pressing the side volume keys.
At the end of the conversation press to hang up.
When you receive a call, the number of your caller is displayed when it is presented by the network.
Press to answer, and speak.
To refuse the call, press .
To stop the ring tone or the vibrate, without refusing the call, press .
When on a call, pressing [ ] allows you to have access to different functions.
Pressing [ ] allows you to switch off the microphone temporarily when you wish to mute your audio.
Press 0 (hold down) to display « + », then the number of the called party.
Depending on the network you can obtain the emergency service with or without SIM card. It is enough to be in an area
served by a network.
To obtain the international emergency service, dial then press .
To change to hands-free mode during a call, make a short press on the green key then press [ ] to confirm activation
of the amplified mode.
in this mode do not bring the phone up to your ear.
252926853_my411X_FCC_en.book Page 13 Jeudi, 19. juillet 2007 1:28 13
14 Using your phone
The antenna is integrated in your phone, under the upper part of the back cover.
Avoid putting your fingers on this area when the phone is switched ON.
If your fingers obstruct the antenna, the phone may have to operate with a higher
power level than usual; decreasing its efficiency quickly. It could also affect the
quality of your communications.
-Don’t press the keys when not necessary: each keypress activates the backlight, and uses much power.
-Don’t obstruct the antenna with your fingers.
-Activation of
®
function reduces the phone battery life. We advise you to deactivate it when not in use.
252926853_my411X_FCC_en.book Page 14 Jeudi, 19. juillet 2007 1:28 13
Using your phone 15
Your phone is powered by a rechargeable battery. A new battery must be
charged for 4 hours at least before being used for the first time. It reaches its
optimum capacity after a few cycles of use.
When your battery has been discharged, the empty battery icon flashes. In this
case recharge your battery for at least 15 minutes before making any calls in
order not to be cut off quickly.
Connect the charger to a socket.
Plug the end of the cable into the bottom connector of the phone.
The phone is then charging up. The battery icon scrolls up and down to indicate
that it is charging. When the battery is fully charged, the charging stops on its
own. Disconnect the cable.
When charging, the battery may warm up, this is normal.
If the battery has entirely discharged, the phone cannot start. Plug the phone to the charger. The phone will switch on
after a few minutes of charge. You can use the phone again when the option is displayed on the screen.
There is danger of explosion if the battery is placed in an incorrectly way or if it is exposed to fire.
Do not short circuit it.
The battery does not have any part that you can change.
Do not try to open the battery casing.
Use only the appropriate chargers and batteries as shown in the phone manufacturer’s catalogue.
The use of other types of chargers or batteries may be dangerous or invalidate the warranty.
Used batteries must be disposed of in the appropriate places.
We advise you to take the battery out if you plan not to use the phone for extended periods.
You are strongly advised not to connect your phone to the charger if it doesn’t contain a battery.
The charger is a safety step-down transformer, it is forbidden to modify, alter or replace it by another component (power
supply plug, etc).
252926853_my411X_FCC_en.book Page 15 Jeudi, 19. juillet 2007 1:28 13
16 Phonebook
Enter the menu, the contacts list is displayed if you already get some (otherwise, go to ).
When a contact is selected, an icon is displayed in the title bar:
contact stored in the SIM card
contact stored in the phone
contact stored in the Fixed Dialling. See and in Menu for more details about this
activation.
You can search for a contact quiclky by typing the first letters (up to three). You can display it by pressing .
There are two options to store a contact :
1) select [ ], then select or , or
2) enter in pressing , then select , or .
-Enter the last name and press the navigator ( ).
-Enter the number and press the navigator ( ).
you can fill other fields if you store the contact in the phone memory (email, address, ringtone, photo, etc.).
-Press [ ] to store it.
Several ways:
-Select a contact. Press to start the call.
-Select a contact, press , his number is displayed, press [ ] to start the call.
-Direct call from the idle screen (only for the contacts stored in the SIM card memory): type the number with which the
contact was saved then (example : 21 ) or the number then , the number is displayed, confirm.
252926853_my411X_FCC_en.book Page 16 Jeudi, 19. juillet 2007 1:28 13
Phonebook 17
To display the various options, select a contact and press [ ].
Modify what you want and validate then select once the modifications completed.
To send a SMS or a MMS to a contact (see chapter ).
To send a contact details by message (see chapters ).
To send the details of one, several or all the contacts by
®
.
This allows you to copy your phonebook contacts from one memory to the other. Only the name and the first phone number
will be copied.
You can create the entries corresponding to your own numbers in order to consult them when necessary.
Select and validate. Enter the different details and validate.
Select or and validate.
-: the screen displays the amount of memory used. The memory capacity is shared between the phonebook and
various other features. If you lack memory, check if you can free some space.
-: available memory only for contacts.
It allows you to delete the contact(s) selected or all the contacts.
252926853_my411X_FCC_en.book Page 17 Jeudi, 19. juillet 2007 1:28 13
18 Phonebook
The details of a contact stored in the phone memory can be saved in a business card.
-Select a contact and press [ ].
-Select and [ ]. The details are saved as . Then you can read it, modify it or send it by
message or
®
.
This allows you to copy all the SIM card contacts to the phone memory and vice versa.
You can synchronize your phonebook with your archives stored in your operator’s network depending on the options offered
by your operator with a GSM or GPRS connection from your phone.
You can also synchronize your phonebook with your archives stored in your computer. You have only to activate
®
or configure your USB connection in your phone (see chapter ).
This allows you to add a contact to a mailing list.
-: This menu allows you to select the default phonebook (SIM, Phone, SIM and Phone) displayed when the
phone switches on.
-: This menu allows you to select the way to sort contacts in the phonebook (by name or first name).
A mailing list allows you to group contacts: this list can be used to send messages easily to all the list contacts (only contacts
stored in the phone memory).
-In the phonebook, select the tab pressing the navigator rightwards.
-Press [ ].
-Select .
-Enter a name and press .
-Then, on a list press [ ]. Select each time you want to add a contact in the list.
252926853_my411X_FCC_en.book Page 18 Jeudi, 19. juillet 2007 1:28 13
Messages 19
From this menu, you are able to send SMS and MMS. MMS is a Multimedia Message Service, which allows you to enclose
photos, audio files, and others rich contents to your messages; these messages can even be composed of several slides.
MMS are differently charged to SMS are. Please contact your network provider to get more information on their cost and the
service availability.
-Select / .
-Type your text. The T9 mode is applied by default.
The language used is the one selected on the display of the phone (if the language selected is not compatible with the Easy
Message T9®, the English language will be automatically selected).
The Easy Message T9® mode helps you to easily write your messages.
Press once the key corresponding to the letter chosen and compose the word by continuing to press the
keys corresponding to the various letters without paying attention to the display: the word is highlighted.
The same sequence of keys pressed can correspond to several words, existing on the dictionary. If the word
that appears is not the word you expected, press the navigator upwards to scroll through the words
corresponding to this key sequence.
Once you agree on the word proposed on the screen, press the navigator rightwards to validate it or on the key (which
validates and inserts a space after the word), and go on writing the next word.
If the word you are expected is not proposed, please add characters until you get the message ? Press and
validate if the word displayed suits you or modify this word before adding it in the dictionary.
If you do not want to use , you can switch to ABC mode pressing (long press). The allows you to
type letters: press on one key several times to make the letter wanted appear (for example: press twice the key to display ).
A short press on switches the text to upper case, lower case or figures.
Punctuation characters are obtained by pressing the key (except in mode), or with the help of mode (fast access
by briefly pressing ).
252926853_my411X_FCC_en.book Page 19 Jeudi, 19. juillet 2007 1:28 13
20 Messages
Accented characters are generated automatically in T9 mode.
In ABC mode accented characters are available by pressing the key supporting the non-accented character repeatedly.
-Select if you do not want to send the message immediately or if you want to send it several times. It is saved in the
menu.
or
-Select to use it again as a template. It is saved in the menu.
-Once the text entered, press the navigator or press [ ] and select .
-Enter the receiver’s number or take it in your phonebook pressing [ ] then selecting .
You alson can select a contacts list in your phonebook.
When you receive a message, the phone plays the ring tone that you selected, and a message icon comes on the screen of
your phone.
If you do not read the messages, this icon remains displayed on the screen. When it flashes, the memory is full.
Receiving icons, backgrounds or tunes can take several seconds. An icon is flashing when the download of your message is
in progress.
Note that you have two different possibilities for receiving MMS: automatically or manually; if « manual mode » is activated,
then you will receive only a notification in your Inbox, meaning that a MMS is available on the MMS Server; select Retrieve
in the options when you want to retrieve the MMS from the network.
For more details about automatic and retrieval modes, see « Options » on page 22.
252926853_my411X_FCC_en.book Page 20 Jeudi, 19. juillet 2007 1:28 13
Messages 21
Messages are listed in chronological order, the latest one being displayed first.
The quantity of Not Read and Not Retrieved messages is shown. Not Retrieved and Not Read messages are shown in bold.
When you store a composed message, it is stored among the drafts.
Select a message and press [ ]. The options are: Read, Details, Delete, Modify.
If you select a message and press , you can modify it.
If you want to send it, select then press [ ] and select .
The menu is used to store all your sent messages if you activated the option in the
menu (see page 22).
Too many messages saved will quickly fill up the available memory and no further messages will be received.
For each message, its characteristics (shown with an icon) and the time (or date) of sending are displayed on the screen.
Select a message and press .
Choose one of the options given: Read, Modify, Forward, Delete, Delete all.
This menu displays the messages that have not been sent. You can therefore send them again.
This function allows you to call your voicemail.
This number depends on the operator.
When composing a message, if you selected the option, the template is saved in this menu.
The same options as for the drafts are available for the templates.
252926853_my411X_FCC_en.book Page 21 Jeudi, 19. juillet 2007 1:28 13
22 Messages
Choose one of the options given: SMS or MMS.
The SMS sending options are: store sent messages, acknowledgment, period of validity (during that period, the network
provider will try to send the message), message format, message centre number.
The MMS options are:
-: it is highly recommended that you keep this function deactivated, in order to avoid a full memory.
-: if you are in a poor coverage area, it may be more convenient to choose the manual retrieval mode which
gives you the retrieve later option.
-: selection of a priority to send a message.
-: request of a delivery report when sending a message.
-: during that period, the network provider will try to send the message.
-: sending a delivery report when receiving a message.
-: if you want to deactivate the reception of any MMS in your phone.
-: to select another MMS provider, or set the parameters of a new MMS provider.
-: if you want to activate/deactivate this display.
-: you choose to display or not your phone number on the receiver’s phone screen, with that message.
-: if you want to activate/deactivate the option of maximum size supported for the MMS.
This menu is used to activate reception of information broadcast by the network.
You can choose whether you want to receive this information or not (please contact your network provider).
This menu displays the mailing lists created in the phonebook.
To display the different options, press [ ].
-: allows you to create a new mailing list.
-: allows you to modify the mailing list name.
-: allows you to add a contact to the mailing list.
-: allows you to see the type of mailing list and the number of contacts.
-: allows you to delete the mailing list.
252926853_my411X_FCC_en.book Page 22 Jeudi, 19. juillet 2007 1:28 13
Messages 23
You may know the memory available for saving messages.
Choose one of the options given: SMS or MMS.
The SMS screen displays the memory available either on the SIM card or on the phone.
The MMS screen displays how much memory is used in Kbytes.
252926853_my411X_FCC_en.book Page 23 Jeudi, 19. juillet 2007 1:28 13
24 Camera
Select the menu. The camera is now on. Look into your phone display and position your subject. Move your phone
to position your photo.
The three text lines on the left of the screen indicate:
-the number of photos that you can take with the photo and the format quality selected,
-the current format selected ( option below),
-the current quality selected ( option below).
:
To activate zoom, use the navigator upwards or downwards.
Note: if the zoom selected does not match with the storing format, the photo is automatically saved in an appropriate format
(pressing [ ]):
-: to take a photo with a 5, 10 or 15 second time delay.
-: to select an effect.
-: to select luminosity.
-: used to select the location where the photo will be saved (phone or memory card).
-: to select the sound you will hear when taking a photo.
-: to select the photo quality.
-: to select the resolution in which your photo will be saved.
-: to take a video.
252926853_my411X_FCC_en.book Page 24 Jeudi, 19. juillet 2007 1:28 13
Camera 25
-Press , the photo is taken and stays on the phone display.
-Press if you want to send the photo immediately by MMS.
-Press to save your photo, a progress bar animates then different options are displayed:
•:allows you to send the photo by MMS.
•:allows you to send the photo by
®
.
•: allows you to take a new photo.
•: various options to modify a photo.
: allows you to magnify certain parts of your photo.
: allows you to improve contrast.
: allows you to modify a photo with an embossed grey tint.
: allows you to change a photo into negative.
: allows you to change color into black and white.
: allows you to increase or decrease the contrast of your photo.
: allows you to sharpen a photo.
: allows you to add blur to a photo.
: allows you to change colors into sepia.
: allows you to shape a photo.
: allows you to increase or decrease the brightness of a photo.
: allows you to increase or decrease the solarize of a photo.
: allows you to increase or decrease the color saturation.
•: allows you to modify the name of a photo.
•: allows you to assign a photo to a contact saved in the phonebook.
•: allows you to select the photo as a wallpaper or screensaver.
using the camera during a call may disturb the call quality.
252926853_my411X_FCC_en.book Page 25 Jeudi, 19. juillet 2007 1:28 13
26 Camera
-Select the menu then to switch into video mode.
-If necessary, select the following settings pressing [ ]:
•: allows you to record wether not the sound when recording a video.
•: allows you to choose a video size.
•: allows you to select where the video is saved (phone or memory card).
•: to take a photo.
-Press to record then press [ ] when you want to stop recording.
the phone automatically stops recording when the maximum size available is reached.
-Press [ ] to display the options:
•: allows you to record a new video.
•: allows you to play the video.
•: allows you to send the video by MMS.
•: allows you to send the video by
®
.
•: allows you to modify the name of a video.
•: allows you to delete a video.
the videos are saved in the phone with a .3gp format.
252926853_my411X_FCC_en.book Page 26 Jeudi, 19. juillet 2007 1:28 13
Multimedia 27
The menu contains the directories of all the multimedia objects recorded in your phone and the downloaded
objects (photos, videos, ringtones, etc.).
There are two tabs that you can select pressing the navigator rightwards or leftwards:
- tab (phone memory)
- tab (available if you have inserted a memory card in your phone).
You can copy the multimedia objects from the card to your phone.
There are three directories: and .
Pressing [ ] on a directory allows you to :
-Display its contents,
-Display the available memory.
In a directory, you can make a WAP connection to download multimedia objects.
[] on each object allows you to display various options.
252926853_my411X_FCC_en.book Page 27 Jeudi, 19. juillet 2007 1:28 13
28 Music player
This menu allows you to listen to music similar to a portable music player.
If you do not have any music stored in the memory, use WAP to download some or connect your phone to a PC (see chapter
). Two tabs are displayed: and . Select pressing the navigator rightwards. The directory of
the music contained in the phone and in the memory card (if it is present) is displayed.
Select [ ]: you can play all the music directly or manage them in lists.
There are two options to create a playlist:
1) Select [ ] in the tab.
•Select .
•Type a name for your playlist and press .
•The list of the music is displayed in two tabs: those contained in the phone memory or pressing the navigator rightwards
those contained in the memory card.
•Select the music you want in your playlist and press to add the music to the playlist ; do it again if you want add
others.
When pressing [ ] on a playlist, you can display or play the contents, add music, create a new playlist, delete one
or modify its name.
From the idle screen:
-Short press: access to Music player
-Long press: access to Music player and start playing
From the Music player menu:
-Short press: play/pause music
-Short press: Set the volume
-Long press: Change to the next or previous music track
252926853_my411X_FCC_en.book Page 28 Jeudi, 19. juillet 2007 1:28 13
Music player 29
2) Select [ ] in the tab.
•Select .
•Choose between either creating a new playlist or replacing the contents of a playlist already created.
tab: This tab opens as soon as a music or a list of music, has been selected to be played.
To display the different options, press [ ]:
-: to play musics of the playlist.
-: allows you to remove the music selected or all the music from the list.
-: to play the musics one by one, in a continuous way or in a random way.
-: to choose whether or not to replay a list.
-: save the current playlist as a new playlist.
-: to send the music by message or
®
.
-: to rename the music.
-: allows you to display the memory used for musics and the available memory for the multimedia objects.
-: properties of the music selected.
252926853_my411X_FCC_en.book Page 29 Jeudi, 19. juillet 2007 1:28 13
30 WAP
: this menu allows you to input an Internet address directly.
: allows to store bookmarks (addresses of Internet sites).
A bookmark stored in the list can be modified, sent or deleted.
You can receive bookmarks and add them to this list.
: allows to display the pages saved on Internet sites out of connection
(Warning: these pages will not be updated).
: backward and forward navigation of the pages displayed are kept in
memory.
-: allows you to select or modify your provider’s configuration settings or
to configure others providers’settings.
-:is used to choose the time after which the call is
automatically disconnected if you have forgotten to log off from a service.
see chapter for information on @ and GPRS icons.
The WAP navigator is under licence:
The WAP navigator and the softwares
included are the exclusive property o
f
Openwave. For this reason, it is
forbidden to modify, translate,
disassemble or even decompile all o
r
part of these softwares.
252926853_my411X_FCC_en.book Page 30 Jeudi, 19. juillet 2007 1:28 13
WAP 31
If you are logging onto the GSM or GPRS network, the @ symbol flashes, the metering of the cost of the call starts as soon
as it stops flashing.
Some WAP sites allow you to download ringtones, icons, animated screensavers, games or JAVA™ applications. Once
downloaded, they are stored in your phone's memory. You can then save them in your phone (same operation as used for
downloading using messages).
To log off, press . The logoff happens automatically after a few seconds of inactivity if you forget to log off. This period is
defined by the linger time setting.
A flashing icon indicates that the phone is logging onto a GPRS network.
A non-flashing icon indicates that the GPRS network is available; if the icon is dark, it indicates that the phone is logged onto
the GPRS network.
This icon is not displayed if the GPRS network is not available or if the SIM card inserted in your phone does not include the
GPRS service. It may also disappear when accessing WAP services if the connection uses the GSM network instead of the
GPRS network.
252926853_my411X_FCC_en.book Page 31 Jeudi, 19. juillet 2007 1:28 13
32 Games
!
Your phone contains one or several games, depending on model. You can
download more. You are the owner of a SAGEM mobile phone which gives you
the ability to download applications and games to be executed on your phone
thanks to the built-in Java™ engine.
However, receiving applications from everywhere implies some basic knowledge
of the possible effects of such download.
We advise you to download certified games or applications from your operator
sites or from www.planetsagem.com.
By default, the connection URL of your operator or of PlanetSagem is configured
in your phone.
If no connection URL is configured, by selecting the menu, you
display the WAP function to configure new profiles which allow you to download
games or applications.
When you select a game or an application, the /menu
(displayed with [ ] key) allows you to configure a profile which only be used
by the game or application to connect to the network (to exchange scores for
example) but is not used to download new games or applications.
252926853_my411X_FCC_en.book Page 32 Jeudi, 19. juillet 2007 1:28 13
Applications 33
This menu allows you to set and activate the alarm.
The alarm works even when the phone is switched off.
(see chapter ).
This menu is used to set and activate the timer.
The alarm icon appears on the idle screen.
This menu gives you access to your diary and get to a day, week, month or specific date. It lets you add events, access the
global actions for all the events and manage them by event category.
Press [ ].
-: allows you to add events of the text or voice type. Fill in the different items. Save
the event.
-: allows you to schedule the deletion of events that took place more than one day, week or month ago.
-: allows you to display the memory capacity used by the different functions of your phone and in particular the
diary.
-: allows you to delete all the events from your diary.
-: allows you to see the different event categories, assign a specific ring tone to each individual category, know
the number of events in each category and see them.
-: you can synchronize your organizer with your archives stored in your operator’s network depending on the
options offered by your operator with a GSM or GPRS connection from your phone.
You can also synchronize your organizer with your archives stored in your computer. You have only to activate
®
or configure your USB connection in your phone (see chapter ).
252926853_my411X_FCC_en.book Page 33 Jeudi, 19. juillet 2007 1:28 13
34 Applications
The other menus are:
-: allows you to access events on a month-by-month basis.
-: allows you to access events on a week-by-week basis.
-: allows you to access the events for the current day.
-: allows you to access events at a specific date.
This menu allows you to use your phone as a calculator.
Use the following keys to make calculations:
-: Add, : Subtract, : Multiply, : Divide
The following keys are used for:
-: Equals or convert
-: Delete
-: Decimal point.
If no calculations are being run, pressing [ ] allows you to use the value in the converter directly.
This option allows you to convert one currency to another.
Enter a value and press the navigator upwards to convert from one currency to another, or downwards to convert back.
Pressing [ ] allows you to use the following options:
If you select , the converter will work in the idle screen by entering the desired numbers and pressing the navigator
upwards or downwards to convert.
Enter the exchange rate corresponding to the chosen currency.
Enter the two types of currency to be converted.
This option allows you to use immediately the value converted in the .
252926853_my411X_FCC_en.book Page 34 Jeudi, 19. juillet 2007 1:28 13
Applications 35
This menu allows you to add ToDo’s, access category-based Todo management and delete all the ToDo’s.
If there are not any ToDo, you directly access to the options below. If there is a ToDo, press [ ] to display the options.
-/: allows you to add ToDo of the text or voice type. Fill in the different items. Save the
ToDo.
-: allows you to see the different ToDo categories, assign a specific ring tone to each individual ToDo, know the
number of ToDo’s in each category and see them.
-: allows you to delete all the ToDo’s from your ToDo.
-: allows you to display the memory used by the different functions of your phone and in particular the ToDo.
-: you can synchronize a task with your archives stored in your operator's network depending on the options
offered by your operator with a GSM or GPRS connection from your phone.
You can also synchronize a task with your archives stored in your computer. You have only to activate
®
or
configure your USB connection in your phone (see chapter ).
This menu allows you to do all the actions possible on any ToDo. To display a ToDo, select it in the list and press .
To display the different options, press [ ].
-: allows you to modify the ToDo properties.
-: allows you to delete the ToDo.
-: allows you to send the ToDo by MMS.
-: allows you to send the ToDo by
®
.
This item may not be present on your phone’s menu, as its contents depends on your SIM.
252926853_my411X_FCC_en.book Page 35 Jeudi, 19. juillet 2007 1:28 13
36 Settings
"
This menu allows you to switch to Silent mode.
Silent mode can also be accessed via the idle screen by holding down the key.
When the phone is in silent mode, this relevant icon appears on the idle screen.
In this mode, the ring tone will not function, except for the alarm clock.
if you have activated the silent mode, it does not remain after switching off your phone.
This menu allows you to allocate a ring tone to different functions (call receiving, message receiving, alarm).
This menu allows you to activate the vibrate mode for calls.
This menu allows you to choose your phone’s display language.
Select your language and validate.
If you select , the language used will be the one relative to your SIM card.
This menu allows you to activate a beep for the battery, the keypad or the network.
252926853_my411X_FCC_en.book Page 36 Jeudi, 19. juillet 2007 1:28 13
Settings 37
This menu allows you to set the date and time of your phone.
This menu allows you to choose manual or automatic updating of date and time (after switch off of your phone or when going
abroad for instance) (service depending on the operator)
Please select Automatic, Manual or On demand and press [ ].
This menu allows you to select the date and time display.
In the list that appears, select the desired display type between: Analog, Digital, None and validate.
This menu allows you to change time in relation to the GMT time.
Choose the time of the country desired by calculating the time from the GMT time.
This menu allows you to set your phone to the summer/winter time.
Select 1h, 2h or depending on the season, and validate.
This menu allows you to customize the settings of your phone to make it as convenient as possible for you to use.
(Function available depending on model)
This menu allows you to allocate functions to the programmable keys: .
Select the key that you wish to modify and validate.
Choose the function that you want to allocate to this key and validate.
252926853_my411X_FCC_en.book Page 37 Jeudi, 19. juillet 2007 1:28 13
38 Settings
You can exchange with other devices (PC, mobile phones, personal assistants, printers, etc.) various data: pictures, sounds,
photos, videos, To Do tasks, organiser events, contacts, etc.
Data exchange can be done through:
-a USB cable,
-a
®
connection.
®
is a technology used to establish a wireless connection with other
®
equipped devices: for example, with
a pedestrian kit or a car kit to phone or with a PC to swap data. The range is about 10 m.
The
®
menu contains the following entries:
This menu lets you draw up the list of devices with which the
®
connection is secure (by authentication and
encryption).
A device must be added to this list before it can be used in
®
with your phone except for exchanging objects. When
you select send by
®
(photo, Todo task, contact details, etc.) the phone displays the list of devices. You do not need
to select a device from this list at this time, you can start a one-off search for a device when you initiate sending.
See below for the pairing procedure.
With this menu you can, on the one hand, activate and deactivate the
®
function and, on the other, when the
®
function is activated, select whether you want other
®
devices to be able to detect your device.
-: your phone is not visible. It cannot be detected by other
®
devices. In this mode, a device can only
connect to your phone using
®
if you have already paired it. This mode lets you detect other devices and pair with
them from your phone.
-: your phone is visible for a period of 3 minutes. During this period, it can be detected by the other
®
devices. Select this mode when a pairing with your phone has been initiated from another
®
device.
-: the
®
function is not available.
-: your phone is visible and can be detected by the other
®
devices as long as this mode is selected.
:
-The option ensures the best battery life for your phone.
-
®
security is better guarded because your phone remains invisible to the other devices.
252926853_my411X_FCC_en.book Page 38 Jeudi, 19. juillet 2007 1:28 13
Settings 39
This is the name used to identify your phone when it is detected by another
®
device.
Select .
If the
®
function is not active, the phone prompts you to activate it using one of the 3 modes described above.
The phone searches for visible
®
devices and displays the list. Select the device concerned and validate your
choice. Your phone then prompts you to enter a code which must be the same as the code entered on the remote device.
Enter and validate this code: Your phone is now paired with the remote device.
A connected device is shown in blue in the list.
[] on the name of a device lets you access the following options:
-: this is used to delete the device. WARNING: using this function needs starting the pairing over again.
-: this is used to modify the name of the device.
-: this is used to delete all your devices. WARNING: using this function needs starting the pairing over again.
-: this is used to activate the connection with the device.
-: this is used to deactivate the connection with the device.
-: this is used to display the list of the device’s
®
services.
:
-Refer to the user manual of the device with which you are pairing to find out how to set this device to the mode allowing
this operation.
-The code of the remote device may be predefined by the device manufacturer. In this case, refer to the user manual of this
device to find out this code.
This menu allows you to activate or deactivate the Automatic response option when the phone is connected to a pedestrian
kit or a car kit.
Two selections:
-: you can synchronize your phonebook, your organizer or your ToDos with your archives stored in your
operator’s network depending on the options offered by your operator with a GSM or GPRS connection from your phone.
-: you can synchronize your phonebook, your organizer or your ToDos with your archives stored in your computer.
Use the Wellphone software and configure your USB connection in your phone or activate
®
.
252926853_my411X_FCC_en.book Page 39 Jeudi, 19. juillet 2007 1:28 13
40 Settings
1) Data exchange between a memory card inserted in the phone and a PC
First you must select the mode (see hereafter).
After connection of the USB cable between the phone and the PC, the memory card is considered as an additional memory
in the Windows explorer files directory; you can copy/paste.
2) Data exchange between the phone memory and a PC
First you must select the mode (see hereafter).
After connection of the USB cable between the phone and the PC, you must use the MPAS software (My Pictures And Sounds
available on www.planetsagem.com) or the Wellphone software (available on www.wellphone.com).
: If a call comes in during an exchange of data with your PC, the link will be interrupted and will have to be manually
re-started.
This menu allows you to select a mode to connect the phone to a peripheral with the USB cable available as an accessory.
-: if you select this option, when connecting a USB cable, the phone asks you to select the mode you want.
-: to exchange data between the phone memory and a PC.
-: to exchange data between the memory card inserted in the phone and a PC.
-The memory card is not detected by the phone. Consequently, if you have configured your phone with a wallpaper or a
ring tone stored in the memory card, those ones will not be used during the connections.
-Camera is not available, neither in photo mode, nor in video mode.
This menu allows you to customize your screen by choosing a different presentation.
This menu allows you to select a background picture.
You can select wallpapers through the phone default wallpapers and the pictures downloaded ( ), several
wallpapers in a random way ( ).
You can also select the connection link to download pictures.
When the directory / is displayed on the screen, on the picture name:
-Press [ ] to validate your wallpaper selection, or
-Press : the picture is displayed. Press [ ] to select it as your phone wallpaper or press the navigator upwards or
downwards to display others.
252926853_my411X_FCC_en.book Page 40 Jeudi, 19. juillet 2007 1:28 13
Settings 41
This menu allows you to select the background picture when displaying menus.
This menu allows you to display your operator’s logo on the idle screen (depending on model).
This menu allows you to display an animation when the phone is in standby mode.
You can select screensavers through the phone default screensavers and the pictures downloaded ( ), several
screensavers in a random way ( ).
You can also select the connection link to download pictures.
When the directory is displayed on the screen, on the picture name:
-Press [ ] to validate your screensaver selection.
or
-Press : the picture is displayed. Press [ ] to select it as your phone screensaver or press the navigator upwards
or downwards to display others.
You can select one of the following eco modes:
-: this mode gives the maximum efficiency of the battery life. The screen is off and the keypad is locked.
To exit this mode: press , the red or green key to turn on the backlight and display time. Press to unlock the
keypad.
-: the screen is off and the keypad is locked. To exit this mode: press the red key. To turn on the backlight
and display time, press .
-: this mode decreases the battery life. The screen is off and the keypad is always active.
To exit this mode: press press any key to light up the screen.
-: only the screen is lit up.
-: both the screen and the keypad are lit up.
in any case, after a certain time of inactivity, the backlight will be automatically turned off to save battery life.
252926853_my411X_FCC_en.book Page 41 Jeudi, 19. juillet 2007 1:28 13
42 Settings
This menu allows you to select the way to sort contacts in the phonebook (by name or first name) and the filter applied on the
contacts list display (SIM contacts, phone memory or both).
This menu is used to adjust screen contrast.
Adjust the contrast using the navigator.
This menu allows you to select various options for sending and receiving messages (see page 22).
The Calls menu allows you to manage all the calls functions (call forward, displaying numbers, call waiting, voicemail number,
etc.).
Depending on your subscription, this service allows you to forward incoming calls to a different number or to the voice mailbox.
Choose the type of forwarding you want from the options available.
This menu allows you to consult the duration of the up calls.
It can also be used to check the volume of data exchanged in GPRS.
This menu allows you to modify the status of the display number function.
Select one of the options given: Anonymous mode, My number, Callers’ number.
You have the ability to mask your number on the phone of the person you are calling.
- network default mode.
- you choose not to activate anonymous mode and then to display your number.
- you choose to active anonymous mode and then not to display your number.
252926853_my411X_FCC_en.book Page 42 Jeudi, 19. juillet 2007 1:28 13
Settings 43
(Operator-dependent service). During a call, you may be informed that a caller is trying to reach you: you hear a special tone.
The caller’s identity is displayed on the screen (name or number).
You can or of the call waiting service in order to check if it is active or not.
During a call, if a second caller tries to contact you, the screen displays the call warning.
This menu allows you to call back a caller you have not managed to reach.
You can set the redial function to inactive, on request or systematic.
If you choose , your phone will offer to redial your caller automatically if his number is busy.
The blacklist is used to limit failures on automatic calls (calls generated by the automatic redial function or by applications:
data, fax for example).
When several automatic calls failed with a number (number busy or unknown), this number is put in the blacklist and no
automatic call will be done with this number any more until you delete it from the blacklist.
: this function does not apply to the calls performed manually.
This function is used to record your voicemail access number.
After an incoming or outgoing call with a number not stored in the phonebook, this option allows you to activate or deactivate
a request to store the number in the phonebook.
This menu allows you to configure network preferences.
Choose to activate (automatically or manually) one of the networks accessible in the area in which your are located.
Choose to view all the pre-registered networks.
Choose to select your network: GSM-DCS or PCS.
Choose to select the way you want to be attached on the GPRS network: always, or only when needed (when
launching a data connection).
252926853_my411X_FCC_en.book Page 43 Jeudi, 19. juillet 2007 1:28 13
44 Settings
This menu allows you to configure your phone’s security settings.
This menu allows you to activate and modify your phone’s PIN.
To modify the PIN, select and [ ].
Enter old PIN and validate.
Enter new PIN twice and validate.
To activate or deactivate the PIN, select the menu and [ ].
Enter PIN and validate.
Select or and validate.
You have a second PIN number to allow you to access certain functions (*).
Proceed as above in order to activate or deactivate PIN number 2 of your phone.
The Phone code menu allows you to activate the phone code so that it is requested and checked whenever the phone is
switched on if a different SIM card is used. This code is automatically linked to the SIM card installed when the phone is
activated, for example to protect the phone if stolen.
Select and [ ].
Enter 0000 (the factory code, by default) and validate.
Select or and validate.
To modify the phone code, select and validate.
Enter old phone code and validate.
Enter new phone code and validate.
Enter phone code again to confirm it and validate.
252926853_my411X_FCC_en.book Page 44 Jeudi, 19. juillet 2007 1:28 13
Settings 45
This menu allows the activation or deactivation of automatic deletion, after power off/on, of outgoing calls, messages stored
or organizer events.
Select or and validate.
This menu allows you to modify the call barring.
Access to this service depends on your type of subscription.
This menu allows you to block the sending or receiving of certain calls.
Before you can use this service, a password will be provided by your operator when you take out your subscription.
Access to this service depends on your subscription type.
To activate call barring :
-Select incoming or outgoing calls.
-Select the call type on which you want to activate call barring.
-Select:
•either All,
•or If roaming, if you are away from your home country and if roaming is available, only incoming calls will be blocked.
-Select Activation and enter password.
This menu allows you to restrict the outgoing calls.
The availability of this menu depends on your SIM.
Enter PIN2 number and validate.
Select or and validate.
Proceed as for any other phonebook.
When activating this function, only the numbers stored in the phonebook can be called.
This phonebook is linked to the SIM card, and its size depends on the card's capacity.
This menu allows you to control the cost of your calls (*).
252926853_my411X_FCC_en.book Page 45 Jeudi, 19. juillet 2007 1:28 13
46 Settings
This menu allows you to set various parameters needed for WAP connection (see chapter ).
This menu allows you to select the music play options.
This menu allows you to set the camera features of your phone.
-: this menu enables you to take a photo with a 5, 10 or 15 second time delay.
-:This menu allows you to select the sound you will hear when taking a photo.
-:This menu allows you to choose the format in which your photo will be saved.
-: This menu allows you to select the photo quality.
This menu allows you to set the video features of your phone.
-: This menu allows you to select or not the sound when recording a video.
-: This menu allows you to choose a video size.
This menu allows you to select (phone memory or memory card) where the sounds, pictures, videos or applications
downloads will be stored.
This menu allows you to activate or deactivate the display of the help in the phone.
252926853_my411X_FCC_en.book Page 46 Jeudi, 19. juillet 2007 1:28 13
Technical features 47
#$
Weight: 84.9 g
Size: 103.2 x 45.2 x 14.2 mm
Original battery: Li-ion
Battery life calls/standby: up to 3 h 00/240 h (these values are theoretical ones and given for information only)
Multimedia objects supported:
-Audio formats: iMelody, Midi, wav, MP3, AAC (depending on model), AMR
-Graphic formats: wbmp, bmp, png, gif, animated gif, jpeg, 3gp (*), mpeg4 (*) (depending on model)
Size of memory available for messages: 100 messages
Size of memory available for MMS, the phonebook and the multimedia objects: up to 13 Mb (depending on model)
Maximum size of each message:
-SMS: < 160 characters
-MMS: < 300 kB for outgoing messages, 100 kB for incoming messages (depends on the phone configuration and on the
operator reservations)
Using temperature: from - 10 °C to + 55 °C
Memory card maximum size: 2 GB
252926853_my411X_FCC_en.book Page 47 Jeudi, 19. juillet 2007 1:28 13
48 Certification and safety information for the United States and countries using FCC standards
$$$$
"%
This device complies with part 15, part 22 and part 24 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications made to this equipment not expressly approved by Sagem Communication for compliance could
void the user’s authority to operate the equipment.
252926853_my411X_FCC_en.book Page 48 Jeudi, 19. juillet 2007 1:28 13
Certification and safety information for the United States and countries using FCC standards 49
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure
to radiofrequency (RF) energy set by the United States Federal Communications Commission (FCC). These limits are part
of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based
on standards that were developed by independent scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless
of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate,
or SAR. The SAR limit set by the FCC and Health Canada is 1.6 W/kg (*). Tests for SAR are conducted using standard
operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating
can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower
the power output.
Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the
RF limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and
locations (i.e., at the ear and worn on the body) as required by the FCC for each model.
The highest SAR value for these model phones as reported to the FCC when tested for use at the ear and when worn on the
body are (measured at a distance of 0.98 inches (2.5 cm)):
0.952 W/Kg 0.705 W/Kg
252926853_my411X_FCC_en.book Page 49 Jeudi, 19. juillet 2007 1:28 13
50 Certification and safety information for the United States and countries using FCC standards
While there may be differences between the SAR levels of various phones and at various positions, they all meet the FCC
requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated
as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can
be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID M9HDX07S1 (my411X).
Additional Information can be found on the website of the World Health Organization (http://www.who.int/emf).
Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers
a “flight mode” or similar feature, consult airline staff as to its use in flight.
Full attention should be given to driving at all times, and regulations restricting the use of wireless devices while
driving must be observed. For further driving safety tips, please refer to at page 54.
Mobile phones should be switched off whenever you are requested to do so in hospitals, clinics or health care
facilities. These requests are designed to prevent possible interference with sensitive medical instruments.
Obey all posted signs with respect to the use of wireless devices or other radio equipment in locations with
flammable material and chemicals. Switch of your wireless device whenever you are instructed to do so by authorized staff.
You should always consult your physician and review the device
manufacturer's instructions to determine if operation of your phone may interfere with the operation of your medical device.
As a general rule:
- Pacemaker manufacturers recommend that a minimum separation of 6 inches (15 cm) be maintained
between a mobile phone and a pacemaker to avoid potential interference with the pacemaker. To achieve this, use the
phone on the opposite ear to your pace maker and do not carry it in a breast pocket.
- Some digital wireless phones may interfere with some hearing aids. In the event of such interference,
you may want to consult your hearing aid manufacturer to discuss alternatives.
The ring tone, info tones, and handsfree talking are reproduced through the loudspeaker. Do not hold the phone to your ear
when it rings or when you have switched on the handsfree function (at least 3.9 inches (10 cm)).
Use only batteries and charging devices designed for your phone. Otherwise you risk serious damage to health and property
and may void any warranty.
Small parts like the SIM card could be swallowed by young children.
Do NOT open the phone. Only the battery and the SIM card may be removed. Do NOT open the battery.
Keep the battery out of chidren’s reach. Do not allow the battery to be put into the mouth.
252926853_my411X_FCC_en.book Page 50 Jeudi, 19. juillet 2007 1:28 13
Certification and safety information for the United States and countries using FCC standards 51
This phone is designed to comply with the FCC radio frequency (RF) exposure guidelines when used as follows:
- Place or receive a phone call and hold the phone as you would a wireline telephone.
- When transmitting, place the phone in a carrying accessory that contains no metal and positions the phone
a minimum of 0.98 inches (2.5 cm) from your body. Use of other accessories may not ensure compliance with exposure
guidelines. If you do not use a body worn accessory and are not holding the phone at the ear, position the phone a
minimum of 0.98 inches (2.5 cm) from your body.
- When using a data feature, position the phone a minimum of 0.98 inches (2.5 cm) from your body for the
whole duration of the data transmission.
The US Food and Drug Administration (FDA) provides consumer information on wireless phones
at: http://www.fda.gov/cellphones/qa.html.
Following are safety related questions and answers discussed at this web site:
The available scientific evidence does not show that any health problems are associated with using wireless phones. There
is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy
(RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas
high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological
effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by
additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the
reasons for inconsistent results.
Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones
are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the
manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the
hazard no longer exists.
252926853_my411X_FCC_en.book Page 51 Jeudi, 19. juillet 2007 1:28 13
52 Certification and safety information for the United States and countries using FCC standards
Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take
a number of steps, including the following:
-Support needed research into possible biological effects of RF of the type emitted by wireless phones;
-Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and
-Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone
use on human health.
FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety
to ensure coordinated efforts at the federal level. The following agencies belong to this working group:
-National Institute for Occupational Safety and Health
-Environmental Protection Agency
-Federal Communications Commission
-Occupational Safety and Health Administration
-National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones
that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and
other health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless phones. Base stations are thus not the primary subject of the
safety questions discussed in this document.
FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that
high priority animal studies are conducted to address important questions about the effects of exposure to radiofrequency
energy (RF).
FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since
its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that
has driven the establishment of new research programs around the world. The Project has also helped develop a series of
public information documents on EMF issues.
252926853_my411X_FCC_en.book Page 52 Jeudi, 19. juillet 2007 1:28 13
Certification and safety information for the United States and countries using FCC standards 53
FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and
Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining
input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through
contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone
users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research
developments around the world.
If there is a risk from these products--and at this point we do not know that there is--it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radiofrequency
energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
If you must conduct extended conversations by wireless phone every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset
and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna.
Again, the scientific data demonstrate that wireless phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless
phone use.
The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radiofrequency energy (RF), the measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and
the RF source will reduce RF exposure.
Some groups sponsored by other national governments have advised that children be discouraged from using wireless
phones at all.
Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that
handsfree kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These systems
reduce the absorption of RF energy in the head because the phone, which is the source of the RF emissions, will not be placed
against the head. On the other hand, if the phone is mounted against the waist or other part of the body during use, then that
part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements
regardless of whether they are used against the head or against the body. Either configuration should result in compliance
with the safety limit.
252926853_my411X_FCC_en.book Page 53 Jeudi, 19. juillet 2007 1:28 13
54 Certification and safety information for the United States and countries using FCC standards
Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from
RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone.
Studies have shown that these products generally do not work as advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may be forced to boost its power to compensate, leading to an
increase in RF absorption.
Wireless phones give people the ability to communicate almost anywhere, anytime. But an important responsibility
accompanies those benefits, one that every wireless phone user must uphold. When driving a car, driving is your first
responsibility.
Below are safety tips to follow while driving and using a wireless phone that should be easy to remember.
Get to know your wireless phone and its features such as speed dial and redial.
When available, use a hands free device.
Position your wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you
get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.
Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous
weather conditions.
Do not take notes or look up phone numbers while driving.
Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan
your calls before you begin your trip. But if you need to dial while driving, follow this simple tip--dial only a few numbers, check
the road and your mirrors, then continue.
Do not engage in stressful or emotional conversations that may be distracting.
Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident, road
hazard or medical emergency.
Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious
emergency where lives are in danger, call 9-1-1 or other local emergency number.
Call roadside assistance or a special wireless non-emergency assistance number when necessary. If you see a broken-down
vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured or a vehicle
you know to be stolen, call roadside assistance or other special non-emergency wireless number.
252926853_my411X_FCC_en.book Page 54 Jeudi, 19. juillet 2007 1:28 13
Certification and safety information for Europe and countries using CE standards 55
$$$$&
&
252926853_my411X_FCC_en.book Page 55 Jeudi, 19. juillet 2007 1:28 13
56 Certification and safety information for Europe and countries using CE standards
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines were developed by the independent scientific organization
ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.
The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices
is 2 W/kg and the highest SAR value for this device when tested at the ear was 0.74 W/kg (*). As mobile devices offer a range
of functions, they can be used in other positions, such as on the body as described in this user guide (**).
As SAR is measured utilizing the devices highest transmitting power the actual SAR of this device while operating is typically
below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the
minimum level required to reach the network.
The World Health Organization has stated that present scientific information does not indicate the need for any special
precautions for the use of mobile devices. They note that if you want to reduce your exposure then you can do so by limiting
the length of calls or using a ’hands-free’ device to keep the mobile phone away from the head and body. Additional
Information can be found on the websites of the World Health Organization (http://www.who.int/emf).
For individuals concerned about limiting their exposure to RF fields, the World Health Organization (WHO) provides the
following advice:
Precautionary measures: Present scientific information does not indicate the need for any special precautions for the use of
mobile phones. If individuals are concerned, they might choose to limit their own or their children’s’ RF exposure by limiting
the length of calls, or using "hands-free" devices to keep mobile phones away from the head and body.
Further information on this subject can be obtained from the WHO home page http://www.who.int/peh-emf WHO Fact
sheet 193: June 2000.
252926853_my411X_FCC_en.book Page 56 Jeudi, 19. juillet 2007 1:28 13
Certification and safety information for Europe and countries using CE standards 57
Never attempt to disassemble your phone. You alone are responsible for how you use your phone and any consequences of
its use.
As a general rule, always switch off your phone wherever the use of a phone is prohibited.
Use of your phone is subject to safety measures designed to protect users and their environment.
Do not use your phone in damp areas (bathroom, swimming pool…). Protect it from liquids and other moisture.
Do not expose your phone to extreme temperatures lower than - 10°C and higher than + 55°C.
The physicochemical processes created by chargers impose temperature limits when charging the battery. Your phone
automatically protects the batteries in extreme temperatures.
Do not leave your phone within the reach of small children (certain removable parts may be accidentally ingested).
Only use the chargers listed in the manufacturer’s catalogue. Using any other charger may be dangerous; it would also
invalidate your warranty. Line voltage must be exactly the one indicated on the charger’s serial plate.
When travelling by plane, you will need to switch your phone off when so instructed by the cabin crew or the warning signs.
Using a mobile phone may be dangerous to the operation of the aircraft and may disrupt the phone network.
Its use is illegal and you could be prosecuted or banned from using cellular networks in the future if you do not abide by these
regulations.
Please comply with warning signs at petrol station asking you to switch your phone off. You will need to comply with radio
equipment usage restrictions in places such as chemical plants, fuel depots and at any location where blasting operations
are under way.
To avoid the risk of demagnetisation, do not let electronic devices close to your phone for a long time.
Your phone is a radio transmitter which may interfere with electronic medical equipment or implants, such as hearing aids,
pacemakers, insulin pumps, etc. It is recommended that a minimum separation of 15 cm be maintained between the phone
and an implant. Your doctor or the manufacturers of such equipment will be able to give you any advice you may need in this
area.
Always make sure that your phone is switched off in hospitals when so instructed by warning signs or by medical staff.
252926853_my411X_FCC_en.book Page 57 Jeudi, 19. juillet 2007 1:28 13
58 Certification and safety information for Europe and countries using CE standards
Do not use your phone when driving. In order to give your full attention to driving, stop and park safely before making a call.
You must comply with any current legislation.
We advise you the use of SAGEM brand accessories for an optimal operating of your phone and of your accessories.
This phone model has been tested and meets radiofrequency exposure guidelines when used as follows:
-against the ear: place or receive a phone call and hold the phone as you would a wireline telephone,
-body worn: when transmitting, place the phone in a carry accessory that contains no metal and positions the phone a
minimum of 2.5 cm form your body. Use of other accessories may not ensure compliance with radiofrequency exposure
guidelines. If you do not use a body worn accessory and are not holding the phone at the ear, position the phone a
minimum of 2.5 cm from your body,
-data operation: when using a data feature, position the phone a minimum of 2.5 cm from your body for the whole duration
of the data transmission.
To facilitate the recycling of packaging materials, please obey the sorting rules instituted locally for this type of waste.
Spent batteries must be deposited at the designated collection points.
The crossed-out waste bin mark affixed to the product means that it belongs to the family of electrical and electronic
equipment.
To promote the recycling and recovery of waste electrical and electronic equipment (WEEE) and at the same time
safeguard the environment, European regulations require you to obey the sorting rules instituted locally for this type
of waste.
252926853_my411X_FCC_en.book Page 58 Jeudi, 19. juillet 2007 1:28 13
For Customers in the United States 59
%"
Brightstar US, Inc. (Brightstar) warrants this product including any accessories sold for use with the products against defects
in materials or workmanship under normal usage for the periods outlined in the warranty provided with the product, as follows:
This product is for standard consumer use only and is guaranteed to be in proper working order as is determined upon initial
removal from the package and subsequent power up and test call. If this product is determined to be defective, Brightstar will
repair or replace the product, at its option, at no charge.
Any unit requiring repair not covered by the warranty requires authorization from your service provider and Brightstar. Contact
your service provider to obtain this authorization.
This warranty is valid only in the United States.
If Brightstar chooses to replace the equipment, Brightstar may replace it with reconditioned equipment. Parts used in repairing
or replacing the equipment will be warranted for 90 days from the date the equipment is returned to you. This warranty is not
transferable.
TO THE EXTENT PERMITTED BY APPLICABLE LAW, BRIGHTSTAR WILL NOT BE RESPONSIBLE FOR ANY IMPLIED
WARRANTIES, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTIBILITY OR FITNESS
FOR A PARTICULAR PURPOSE. BRIGHTSTAR WILL NOT, IN ANY EVENT, BE LIABLE IN CONTRACT OR TORT FOR
DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INCIDENTAL,
INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, INCLUDING TRAVEL EXPENSE, TELEPHONE
CHARGES, LOSS OF REVENUE, LOSS OF TIME, INCONVENIENCE LOSS OF USE OF EQUIPMENT, LOSS OF
INFORMATION OR DATA, OR OTHER DAMAGE OR LOSS CAUSED BY OR IN CONNETION WITH THE PRODUCTS,
ACCESSORIES, SOFTWARE OR EQUIIPMENT FAILING TO FUNCTION PROPERLY. THIS WARRANTY SETS FORTH
ALL OF BRIGHTSTAR’S REPONSIBILITIES REGARDING THIS PRODUCT AND ITS ACCESSORIES.
Some states and jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or allow
limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
252926853_my411X_FCC_en.book Page 59 Jeudi, 19. juillet 2007 1:28 13
60 For Customers in the United States
The mobile phone and software program developed by Sagem Communication (SAGEM) remains the exclusive property of
Sagem. YOU ARE STRICTLY PROHIBITED FROM MODIFYING, TRANSLATING, DE-COMPILING OR DISASSEMBLING
THIS SOFTWARE PROGRAM OR ANY PART THEREOF.
Brightstar US, Inc. (Brightstar) is the exclusive distributor for Sagem in the United States and is responsible for all warranties
for SAGEM phones and accessories sold in the United States. Please DO NOT contact Sagem directly regarding any
warranty claims; doing so will only delay the processing of your claim.
Your phone allows you to download ring tones, icons and animated screensavers. Some of these items may contain data that
may cause malfunction of your phone or data losses (a computer virus, for example). For this reason, Brightstar disclaims all
responsibility concerning (1) the reception of downloaded data or losses of such data, (2) such data’s impact on the operation
of the phone, and (3) damages resulting from receiving any downloaded data or loss of such data. In addition, any failure
caused by receiving downloaded data that do not comply with the phone’s specifications is excluded from the warranty. The
diagnosis and repair of a phone infected by downloaded data will be at the expense of the customer.
Whenever you wish to make a warranty claim, please contact Brightstar at the address given below and present the
purchasing paperwork that was given to you.
Brightstar warrants that the new phone (excluding consumablesbut including new accessories bundled with the phone), is
free from defects in materials and workmanship under normal usage for a period of twelve (12) months effective from the date
you purchased the phone, to be evidenced by presentation of the paperwork stating the purchase date of the phone. Phones
that have been repaired or replaced as standard during the warranty period stated above are warranted (parts and labor) until
the later of these two dates: Expiry of the original warranty period of twelve (12) months stated above; or three (3) months
from the repair or replacement under warranty.
All faulty phones under warranty will be replaced or repaired free of charge at Brightstar’s option.
252926853_my411X_FCC_en.book Page 60 Jeudi, 19. juillet 2007 1:28 13
For Customers in the United States 61
You are responsible for sending the phone to the repair center. In order to repair or replace a phone under warranty,
Brightstar also requires that a legible and unmodified purchase document, stating vendor’s name and address, date and place
of purchase, type of phone and IMEI (to display the IMEI on your phone’s screen, type: *#06#), be attached to the warranty,
and that the information on the phone identification label be legible and that such label or any other seal have not been
tampered with. The warranty applies under normal usage for the period outlined above. Prior to sending the phone for repair,
it is your responsibility to backup at your expense any customized data stored in the phone (such as phonebook, settings,
wallpapers, and previously downloaded data). BRIGHTSTAR IS NOT RESPONSIBLE FOR DAMAGE TO CUSTOMER
FILES, PROGRAMS OR DATA. The information or operating elements and the contents of files will not be re-installed in any
case in the event of loss. Brightstar may decide, at its option, to repair the phone with new or reconditioned parts, or replace
the phone with a new phone or with a phone in good working condition. During its repair work Brightstar may make, where
necessary, any technical modifications to the phone where these modifications do not adversely affect functionality. Faulty
parts to be replaced during a repair under warranty become the property of Brightstar. The application of the warranty is
subject to the full payment of the sums due for the phone when the request for support is made.
Breakdowns, damage or malfunctions due to the following are excluded from the limited warranty: (i) non-compliance with
the installation and use instructions, (ii) an external cause (such as shock, lightning, fire, vandalism, malice, water damage of
any type, contact with various liquids or any harmful agent, unsuitable electric current, extreme humidity or heat, improper
storage, etc.), (iii) modifications of the phone made without the written consent of Brightstar, (iv) a servicing fault, as described
in the documentation supplied with the phone, (v) lack of supervision or care, (vi) poor environmental conditions of the phone
(including temperature and hygrometry, effects of variations in electric voltage, interference from the mains network or earth),
(vii) repair, including opening or trying to open the phone or servicing done by personnel not approved by Brightstar, (viii)
inadequate packaging and/or poor packing of the phone that is sent back to Brightstar, (ix) the use of products or accessories
not sold by Brightstar as compatible with the phone, or (x) the opening or closing of a SIM Lock done without the agreement
of the original operator.
In addition, the warranty does not cover: (i) normal wear and tear of the phone and accessories, (ii) change of parameters
of the cellular network made after the phone was sold, (iii) supply of new software versions, (iv) delivery of consumables and
installation or replacement of these consumables, (v) phone or software modified or added without the written consent of
Brightstar, (vi) phones returned to Brightstar without having complied with the return procedure specific to the phone covered
by this warranty, or (vii) communication problems linked with a poor environment, including problems accessing and/or
logging onto the Internet, breakdowns of the access network, the failure of the subscriber’s or his correspondent’s line,
transmission fault (such as poor geographic coverage by radio transmitters, interference, disturbance, failure or poor quality
of phone lines, etc.), a fault inherent to the local network (such as cabling, file server, user phone) and/or transmission network
fault (such as interference, disturbance, failure or poor quality of the network, etc.).
252926853_my411X_FCC_en.book Page 61 Jeudi, 19. juillet 2007 1:28 13
62 For Customers in the United States
In the event a customer submits a product for repair or replacement and such product is excluded from warranty coverage
or the warranty period has expired, Brightstar will draw up an estimate to be given to the customer for acceptance before any
repair commences. The repair and freight costs (to and from the repair center) given in an estimate accepted by the customer
will be charged to the customer.
.Any questions or correspondence regarding this limited warranty should be addressed to:
Brightstar US, Inc.
Attn: SAGEM Warranty & Repair Services
1001 Technology Way
Libertyville, IL 60048
These provisions are valid unless Brightstar has made a special written agreement with the customer. If one of the
provisions turns out to infringe a requirement under applicable law that consumers could have the benefit of under the
national legislation, such provision will not be applied, but all other provisions will remain valid.
252926853_my411X_FCC_en.book Page 62 Jeudi, 19. juillet 2007 1:28 13
For customers outside the United States 63
%"
You must always use your phone for the purpose for which it was designed, under normal operating conditions. Sagem
Communication declines all responsibility for any use outside of the scope of its designed purpose and for any consequences
of this use.
The software program developed by SAGEM remains the exclusive property of Sagem Communication. It is therefore highly
prohibited to modify, translate, de-compile or disassemble this software program or any part thereof.
Your phone allows you to download ring tones, icons and animated screensavers. Some of these items may contain data that
may cause malfunctions of your phone or data losses (virus for example).
For this reason, Sagem Communication rejects all responsibility concerning (1) the reception of downloaded data or losses
of the said data, (2) the impact on the operation of the phone and (3) damages resulting from receiving the said downloaded
data or loss of said data. In addition, Sagem Communication states that a failure caused by receiving downloaded data that
do not comply with the specifications set by Sagem Communication is excluded from the warranty. Consequently, the
diagnosis and repair of a phone infected by the said downloaded data will be at the expense of the customer.
Any content that you download to your phone may be protected by copyright belonging to third parties and consequently you
may not have the right to use this content or its use may be restricted. Consequently it is up to you to ensure that you have
permission, such as under the terms of a license agreement, to use any content that you download. Furthermore, Sagem
Communication does not guarantee the accuracy nor the quality of any content that you download. You alone are responsible
for the content that you download to your mobile phone and how you use it. Sagem Communication cannot be held
responsible for this content nor for its use.
It is your responsibility to ensure compliance, at your own expense, with the laws and regulations applicable in the country
where you use your phone.
Whenever you wish to make use of the warranty, please contact your vendor and present him with the purchasing paperwork
that he gave you.
If a fault occurs, he will advise you.
The new phone (excluding consumables), including new accessories bundled with the phone, are guaranteed by Sagem
Communication, parts and labour (apart from travel) against any manufacturing fault for a period of twelve (12) months with
effect from the sale of the phone to the customer, on presentation of the paperwork stating the purchase date of the phone.
252926853_my411X_FCC_en.book Page 63 Jeudi, 19. juillet 2007 1:28 13
64 For customers outside the United States
Phones that have been repaired or replaced as standard during the warranty period stated above are guaranteed (parts and
labour) until the later of these two dates:
Expiry of the guarantee period of twelve (12) months stated above or three (3) months with effect from the date of support
provided by Sagem Communication.
Your legal rights under the terms of applicable national law as well as your rights in relation to your retailer, as set out in the
sales contract, remain applicable and are not in any way affected by this guarantee.
In any disputes, the phone is covered by the legal warranty against the consequences of faults or hidden defects in
compliance with articles 1641 and subsequent of the French civil code.
All faulty phones under warranty will be replaced or repaired free of charge at Sagem Communication’s option (with the
exclusion of repair of any other damage), once it has been specified that the work required for the application of the warranty
will be done in a workshop and that the return costs (transport and insurance) of the phone to the address to be indicated to
it by the Sagem Communication after-sales service, whose phone number will appear on the delivery note, will be charged
to the customer.
Subject to essential legal provisions, Sagem Communication does not accept any warranty, explicit or implicit, other than the
warranty provided expressly in this chapter, nor shall Sagem Communication accept responsibility for any immaterial and/or
indirect damages (such as loss of orders, loss of profit or any other financial or commercial damage) under the warranty or not
The acceptance of a phone under warranty demands that a purchase document that is legible and without modi-fication,
stating vendor’s name and address, date and place of purchase, type of phone and IMEI, are attached to the warranty, and
that the information on the phone identification label is legible and that this label or any other seal has not been tampered with.
The warranty applies in normal conditions of use.
Prior to sending the phone for repair, it is the customer’s responsibility to backup at his expense the customized data stored
in the phone (phonebook, settings, wallpapers). A list of backup facilities can be provided by Sagem Communication on
request. The responsibility of Sagem Communication cannot be invoked if damage occurs to customer files, programs or
data. The information or operating elements and the contents of files will not be re-installed in any case in the event of loss.
Sagem Communication may decide, at its option, to repair the phone with new or reconditioned parts, replace the phone with
a new phone or, in any dispute, a phone in good working condition. During its work Sagem Communication reserves the
facility to make, where necessary, any technical modifications to the phone where these modifications doe not adversely
affect its initial purpose.
Faulty parts to be replaced during a repair under warranty will become the property of Sagem Communication.
The phone repair and standstill time during the warranty period may not lead to an extension of the warranty period as stated
in article 1 above, provided no other vital provisions have been agreed.
The application of the warranty is subject to the full payment of the sums due for the phone when the request for support is
made.
252926853_my411X_FCC_en.book Page 64 Jeudi, 19. juillet 2007 1:28 13
For customers outside the United States 65
The following are excluded from the warranty:
Breakdowns or malfunctions due to non-compliance with the installation and use instructions, to an external cause of the
phone (shock, lightning, fire, vandalism, malice, water damage of any type, contact with various liquids or any harmful agent,
unsuitable electric current...), to modifications of the phone made without the written consent of Sagem Communication, to a
servicing fault, as described in the documentation supplied with the phone, to lack of supervision or care, to poor
environmental conditions of the phone (especially temperature and hygrometry, effects of variations in electric voltage,
interference from the mains network or earth) or even due to a repair, a call-out (opening or trying to open the phone) or to
servicing done by personnel not approved by Sagem Communication.
Damage resulting from inadequate packaging and/or poor packing of the phone sent back to Sagem Communication.
Normal wear and tear of the phone and accessories.
Communication problems linked with a poor environment, especially:
Problems accessing and/or logging onto the Internet, such as breakdowns of the access network, the failure of the
subscriber’s or his correspondent’s line, transmission fault (poor geographic coverage by radio transmitters, interference,
disturbance, fai-lure or poor quality of phone lines...), a fault inherent to the local network (cabling, file server, user phone)
and/or transmission network fault (interference, disturbance, failure or poor quality of the network...).
Change of parameters of the cellular network made after the phone was sold.
Supply of new software versions.
Current servicing work: delivery of consumables, installation or replacement of these consumables…
Call-outs for phone or software modified or added without the written consent of Sagem Communication.
Faults or disruptions resulting from the use of products or accessories not compatible with the phone.
Phones returned to Sagem Communication without having complied with the return procedure specific to the phone cove-red
by this warranty.
The opening or closing of a SIM operator key and call-outs resulting in the non-operation of the phone resulting from the
opening or closing of SIM operator key done without the agreement of the original operator.
In the cases of warranty exclusion and of expiry of the warranty period, Sagem Communication shall draw up an estimate
to be given to the customer for acceptance before any call-out. The repair and carriage costs (there and back) given in the
accepted estimate will be charged to the customer.
These provisions are valid unless a special written agreement has been made with the customer. If one of the provisions turns
out to infringe a legally essential rule that consumers could have the benefit of under the national legislation, this provision
will not be applied, but all other provisions will remain valid.
.Any questions or correspondence regarding this limited warranty should be addressed to:
www.planetsagem.com.
252926853_my411X_FCC_en.book Page 65 Jeudi, 19. juillet 2007 1:28 13
66 End User Licence Agreement (EULA), for the software
&' (&' )*$
$+
You have acquired a Mobile Phone device ("DEVICE"), manufactured by Sagem Communication (SAGEM), that includes
software either developed by SAGEM itself or licensed third party Software suppliers ("SOFTWARE COMPANIES") to
SAGEM with the rights to sub-license it to the purchaser of the device. Those installed software products whatever their
company of origin, and wherever the name of the company of origin is indicated of not in the DEVICE documentation, as well
as associated media, printed materials, and "online" or electronic documentation ("SOFTWARE") are protected by United
States and international intellectual property laws and treaties. The SOFTWARE is licensed, not sold. The owner of the
Software expressly reserves all rights.
IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT ("EULA"), DO NOT USE THE DEVICE OR COPY
THE SOFTWARE. INSTEAD, PROMPTLY CONTACT SAGEM FOR INSTRUCTIONS ON RETURN OF THE UNUSED
DEVICE(S) FOR A REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE,
WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT).
SOFTWARE includes software already installed on the DEVICE ("DEVICE Software") and Software contained on the
CDROM disk ("Companion CD"), if any is supplied with the product.
This EULA grants you the following licence:
You may use the DEVICE Software as installed on the DEVICE. All or certain portions of the DEVICE
Software may be inoperable if you do not have and maintain a service account with an appropriate Mobile Operator, or if the
Mobile Operator’s network facilities are not operating or configured to operate with the DEVICE software.
If any is supplied, additional software for your personal computer is included with your DEVICE. You may
install and use the software component(s) contained in the Companion CD only in accordance with the terms of the printed
or online end user license agreement(s) provided with such component(s). In the absence of an end user license agreement
for particular component(s) of the Companion CD, you may install and use only one (1) copy of such component(s) on the
DEVICE or a single computer with which you use the DEVICE.
252926853_my411X_FCC_en.book Page 66 Jeudi, 19. juillet 2007 1:28 13
End User Licence Agreement (EULA), for the software 67
The SOFTWARE may include digital rights management technology. If SOFTWARE does contain digital
rights management technology, content providers are using the digital rights management technology ("DRM") contained in
the SOFTWARE to protect the integrity of their content ("Secure Content") so that their intellectual property, including
copyright, in such content is not misappropriated. Owners of such Secure Content ("Secure Content Owners") may, from time
to time, request manufacturers or SOFTWARE SUPPLIERS to provide security related updates to the DRM components of
the SOFTWARE ("Security Updates") that may affect your ability to copy, display and/or play Secure Content through the
SOFTWARE or third party applications that utilise the DRM.
You therefore agree that, if you elect to download a licence from the Internet that enables your use of Secure Content,
Suppliers may, in conjunction with such licence, also download onto your DEVICE such Security Updates that a Secure
Content Owner has requested that SOFTWARE SUPPLIERS distribute. SAGEM and SOFTWARE SUPPLIERS will NOT
retrieve any personally identifiable information, or any other information, from your DEVICE by downloading such Security
Updates.
All title and intellectual property rights in and to the SOFTWARE (including but not limited to any images, photographs,
animations, video, audio, music, text and "applets," incorporated into the SOFTWARE), the accompanying printed materials,
and any copies of the SOFTWARE, are owned by SAGEM or the SOFTWARE SUPPLIERS. You may NOT copy the printed
materials accompanying the SOFTWARE. All title and intellectual property rights in and to the content which may be accessed
through use of the SOFTWARE is the property of the respective content owner and may be protected by applicable copyright
or other intellectual property laws and treaties. THIS EULA GRANTS YOU NO RIGHTS TO USE SUCH CONTENT. All rights
not specifically granted under this EULA are reserved by SAGEM and the SOFTWARE SUPPLIERS.
Limitations on Reverse Engineering, Decompilation and Disassembly. You may not reverse engineer, decompile, or
disassemble the SOFTWARE.
The DEVICE Software is licensed with the DEVICE as a single integrated product. The DEVICE Software
installed in the memory of the DEVICE may only be used as part of the DEVICE.
The package for the DEVICE may contain multiple versions of this EULA, such as multiple translations and/or
multiple media versions (e.g., in the user documentation and in the software). Even if you receive multiple versions of the
EULA, you are licensed to use only one (1) copy of the DEVICE Software.
You may NOT transfer any of your rights under this EULA with regard to the DEVICE Software or
Companion CD, except as permitted by the applicable Mobile Operator. In the event that the Mobile Operator permits such
transfer, you may transfer all of your rights under this EULA only as part of a sale or transfer of the DEVICE, provided you
retain no copies, you transfer all of the SOFTWARE (including all component parts, the media and printed materials, any
upgrades , this EULA and, if applicable, the Certificate(s) of Authenticity), and the recipient agrees to the terms of this EULA.
If the SOFTWARE is an upgrade, any transfer must include all prior versions of the SOFTWARE.
You may not rent or lease the SOFTWARE.
If the SOFTWARE includes speech and/or handwriting recognition component(s), you
252926853_my411X_FCC_en.book Page 67 Jeudi, 19. juillet 2007 1:28 13
68 End User Licence Agreement (EULA), for the software
should understand that speech and handwriting recognition are inherently statistical processes; that recognition errors are
inherent in the processes; and that errors can occur in the component’s recognition of your handwriting or speech, and the
final conversion into text. Neither SAGEM nor its suppliers shall be liable for any damages arising out of errors in the speech
and handwriting recognition processes.
The SOFTWARE may include MPEG-4 visual decoding
technology. MPEG LA, L.L.C. requires the following notice:
USE OF THIS SOFTWARE IN ANY MANNER THAT COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED,
EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR INFORMATION (i) GENERATED BY AND OBTAINED
WITHOUT CHARGE FROM A CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE, AND (ii) FOR
PERSONAL USE ONLY; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA, L.L.C.
If you have questions regarding this Notice, please contact MPEG LA, L.L.C., 250 Steele Street, Suite 300, Denver,
Colorado 80206; Telephone 303 331.1880; FAX 303 331.1879.
Termination. Without prejudice to any other rights, SAGEM may terminate this EULA if you fail to comply with the terms and
conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE and all of its component parts.
You agree that SOFTWARE SUPPLIERS may collect and use technical information gathered in
any manner as part of product support services related to the SOFTWARE. SOFTWARE SUPPLIERS may use this
information solely to improve their products or to provide customised services or technologies to you. SOFTWARE
SUPPLIERS may disclose this information to others, but only in a form that does not personally identifies you.
If the SOFTWARE provides, and you choose to utilize, the Internet gaming or update
features within the SOFTWARE, it is necessary to use certain computer system, hardware, and software information to
implement the features. By using these features, you explicitly authorise SOFTWARE SUPPLIERS to use this information
solely to improve their products or to provide customized services or technologies to you. SOFTWARE SUPPLIERS may
disclose this information to others, but only in a form that does not personally identifies you.
The SOFTWARE may contain components that enable and facilitate the use of
certain Internet-based services. You acknowledge and agree that SOFTWARE SUPPLIERS may automatically check the
version of the SOFTWARE and/or its components that you are utilising and may provide upgrades or supplements to the
SOFTWARE that may be automatically downloaded to your Device.
The SOFTWARE may provide you with the ability to link to third party sites through the use of
the SOFTWARE. The third party sites are not under the control of SAGEM. Neither SAGEM nor its affiliates are responsible
for (i) the contents of any third party sites, any links contained in third party sites, or any changes or updates to third party
sites, or (ii) webcasting or any other form of transmission received from any third party sites. If the SOFTWARE provides links
to third party sites, those links are provided to you only as a convenience, and the inclusion of any link does not imply an
endorsement of the third party site by SAGEM or its affiliates.
252926853_my411X_FCC_en.book Page 68 Jeudi, 19. juillet 2007 1:28 13
End User Licence Agreement (EULA), for the software 69
The SOFTWARE may permit SAGEM to provide or make available to you SOFTWARE
updates, supplements, add-on components, or Internet-based services components of the SOFTWARE after the date you
obtain your initial copy of the SOFTWARE ("Supplemental Components").
If SAGEM provides or makes available to you Supplemental Components and no other EULA terms are provided along with
the Supplemental Components, then the terms of this EULA shall apply.
SAGEM reserves the right to discontinue any Internet-based services provided to you or made available to you through the
use of the SOFTWARE.
You acknowledge that SOFTWARE is subject to U.S. export jurisdiction. You agree to comply
with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration
Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other governments.
-DEVICE Software. If the DEVICE Software is provided by SAGEM separate from the DEVICE on media such as a ROM
chip, CD ROM disk(s) or via web download or other means, and is labeled "For Upgrade Purposes Only", you may install
one copy of such DEVICE Software onto the DEVICE as a replacement copy for the existing DEVICE Software and use it
in accordance with this EULA, including any additional EULA terms accompanying the upgrade DEVICE Software.
-COMPANION CD. If any Companion CD component(s) is provided by SAGEM separate from the DEVICE on CD ROM
disk(s) or via web download or other means, and labelled "For Upgrade Purposes Only" , you may (i) install and use one
copy of such component(s) on the computer(s) you use to exchange data with the DEVICE as a replacement copy for the
existing Companion CD component(s).
SUPPORT AND INFORMATION Should you have any questions concerning this EULA, or if you desire to contact SAGEM
for any other reason, please refer to the address provided in the documentation for the DEVICE.
FOR APPLICABLE LIMITED WARRANTIES AND SPECIAL PROVISIONS PERTAINING TO YOUR PARTICULAR
JURISDICTION, PLEASE REFER TO YOUR WARRANTY BOOKLET INCLUDED WITH THIS PACKAGE OR PROVIDED
WITH THE SOFTWARE PRINTED MATERIALS.
252926853_my411X_FCC_en.book Page 69 Jeudi, 19. juillet 2007 1:28 13
70 Java™
,-.
Java™ MIDP technology is an efficient way to provide powerful applications in mobile phones. It allows use, by "over the air"
downloaded applications or games, of the great features built-in in a mobile phone (SMS sending and receiving, multimedia
playback and recording, network access…).
All these MIDP 2.0 features cannot be simply exposed to any MIDlet installed in the handset: a careful access control system
is implemented in the device to protect your private data and airtime consumption.
Access controls are gathered in 9 security groups:
-Network access (GPRS/GSM data airtime consumption, HTTP/web connections…)
-Auto invocation (MIDlet can wake up at a given time or when receiving a SMS)
-Phone call (ability to initiate a phone call)
-Local connectivity (IrDA or serial interfaces use by the MIDlet)
252926853_my411X_FCC_en.book Page 70 Jeudi, 19. juillet 2007 1:28 13
Java™ 71
-Messaging receive (SMS,SMS-CB interception by a MIDlet)
-Messaging sending (SMS sending by a MIDlet)
-Read User data (Subscriber identity, Phonebook, Agenda read access from a MIDlet)
-Write User data (New phonebook or agenda entry)
-Multimedia recording (ability to control camera or microphone from a MIDlet)
According to the security status of an installed MIDlet (see below), each of these security groups has one among 5 possible
authorizations levels (listed from the more restrictive to the more permissive):
-Never
The security group completely prevents access to the protected features.
-Per use
Each time MIDlet tries to use protected feature, user is prompted to grant access.
-Per session
First time a MIDlet uses a protected function, user is prompted to grant access like in "Per use" authorization but access
is granted until the MIDlet terminates.
-Single confirmation
The first time in the whole MIDlet life a MIDlet uses a protected feature, user is prompted to grant access. It remains valid
until the MIDlet is removed from the handset.
-Always
The security group unconditionally grants access to protected features.
A MIDlet has a security status which is either "uncertified", or else "certified".
An "uncertified" status means that the source of the MIDlet could not be verified by the mobile phone at installation time. As
far as the phone knows, the MIDlet could have been written by anyone.
A "certified" status means that the MIDlet was digitally signed by a known party, whose name is displayed by the mobile
phone. This means that the mobile phone successfully authenticated the named party as the source of the MIDlet.
Security permissions are different for "uncertified" or "certified" MIDlets, and may be different for different sorts of named
parties. Usually "uncertified" security permisions are more restrictive than "certified" ones.
When a MIDlet is installed in the mobile phone, default security authorizations are applied.
This default security configuration may be altered through the "Settings/Security" menu of an installed MIDlet.
Once in the "Security" menu, the security status of the MIDlet is displayed (see "Security considerations" paragraph above).
If you do not want to enter the security menu, simply select "Back" button.
You can proceed by selecting "Ok" button.
The menu displayed allows you to increase or decrease permissions currently applied to the current MIDlet for each of the
security groups.
252926853_my411X_FCC_en.book Page 71 Jeudi, 19. juillet 2007 1:28 13
72 Java™
The maximum risk exposure increase is limited by the security status. Depending of the manufacturing configuration, it
means, for example, that "Net Access" security group authorization cannot be set to a permissive value higher that "Session"
for an "uncertified" MIDlet ("Single confirmation" and "Always" are unavailable in the security configuration menu) but an
operator "certified" MIDlet may have all permission values available without any limitations.
Java™ is a new technology enabling use of powerful applications in the mobile phone area. Business
applications and games are easily downloadable by the end-user on a Java™ featured handset.
Your mobile phone is a MIDP 2.0 compliant Java™ platform which implements WMA (SMS support)
and MMAPI (Multimedia support) options, providing an exciting environment to run highly graphical,
networked and intuitive MIDP applications.
Such applications may be, for example, a wide range of games and appealing applications like action
and logic games, agenda, e-Mail reader, Web browser…
A Java™ application or a game designed to run in a mobile phone is named a MIDlet (MIDP applet).
A MIDlet is usually made of 2 files:
-The JAD file
-The JAR file
JAD file stands for ava™ pplication escriptor. It is a small file describing the content of a JAR file
(version, vendor name, size…) and displayed by the mobile phone.
JAR file stands for Java™ Archive. It refers to the application data themselves (program, images, sound).
In rare circumstances, MIDlet vendors may provide no JAD file and the MIDlet is the JAR file alone. In such a case it
is your only responsibility to evaluate the risk to download the JAR file without possibility of consulting the JAD file.
252926853_my411X_FCC_en.book Page 72 Jeudi, 19. juillet 2007 1:28 13
Java™ 73
MIDlets are easily downloaded in the mobile phone through the Games or Applications menus or through the WAP browser.
In almost all cases, you will first receive a JAD file which will be displayed on the screen.
Much care must be given in examining the content of the file as explained further.
When you select a JAD file, your mobile phone downloads it, displays data contained and prompts you to acknowledge the
JAR file download.
The popup displays information below:
-Name of the MIDlet
-Version
-Size (JAR file size)
-Vendor name
-Security status ( see "Security considerations" paragraph below)
-JAR file URL.
If you do not want to download the main data (JAR file), you shall refuse to acknowledge further airtime consumption by
selecting "Cancel" (JAR file is not downloaded).
If you agree on the MIDlet installation, just select "Ok". The MIDlet is installed with security levels set to default values
associated with its security status.
Before downloading an application, such a message may appear: "Your handset cannot identify the application, please be
sure of the source of the application before installing the application".
Java™ and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and
other countries.
252926853_my411X_FCC_en.book Page 73 Jeudi, 19. juillet 2007 1:28 13
74 Java™
As explained above, some downloaded items may contain data or may induce actions which may cause malfunctioning of
your mobile phone or loss or corruption of data or abnormal increase of your airtime consumption.
252926853_my411X_FCC_en.book Page 74 Jeudi, 19. juillet 2007 1:28 13
Troubleshooting 75
#
The battery has completely lost its charge.
Connect the phone to the charger for between 5 and 30 minutes. The phone will only switch on after it has been charging for
a few minutes.
You may use the phone again when the Start option is displayed on the screen.
If the phone still won't start after 30 minutes’ charging, contact customer service.
Check if the SIM card is present and properly positioned / inserted.
Check the condition of the SIM card. If damaged, please go back to the operator's shop for advice. Contact your after-sales
service if the message persists.
An incorrect PIN code has been entered. Be careful! Three incorrect PIN codes will block the SIM Card.
If a wrong PIN number is entered three times in succession, your SIM card is blocked. You must then:
-Enter the PUK (Personal Unblocking Key) code provided by your operator, and validate.
-Enter your PIN number and validate.
-Enter your PIN number again and validate.
After 5 or 10 failed attempts (depending on the type of SIM card), the SIM card is definitely locked. You must then contact
your operator to obtain a new card.
In certain cases, the handset can only be used with some types of SIM cards. This message means that the SIM card you
are using does not fit with the phone. Take the SIM card out, and switch it back on. If the message appears
on the screen, you will need to check its compatibility next to the place where you bought it. If not, please contact your
after-sales service.
Check that the number you have dialled is correct.
If the letter R is displayed on the top right corner of the screen, without any network name displayed, only emergency services
can be called.
Check the status of your credit.
Check that the SIM Card you are using offers the service you are requesting; check if its validity has not expired.
Check and deactivate the outgoing calls restriction when necessary.
252926853_my411X_FCC_en.book Page 75 Jeudi, 19. juillet 2007 1:28 13
76 Troubleshooting
The network could be saturated. Try later.
If the problem persists, please contact your Technical Helpdesk.
Try to make a call in order to check that the phone and the network are operational.
Check and deactivate the permanent call forwarding (permanent call forwarding icon displayed on the screen).
Check and deactivate the incoming calls restriction when necessary.
If the problem persists, please contact your Technical Helpdesk.
Avoid placing your fingers on the top of the phone, where the aerial is integrated: the phone will have to use full strength to
establish a quality transmission.
Check that the message centre number is correctly entered.
To do so, please select the menu , select , select and check the number entered. Please
contact your network provider to get this number.
Check that your subscription does offer this service.
Program the call to be forwarded to voicemail using the information provided by the operator.
Try to make a call to check that phone and network are operational.
Check if the voicemail number is properly configured. To do so, go to the / menu, select and check
the number. Otherwise, enter your operator’s voicemail number.
Go into the menu, select , then [ ]. Wait until the operator appears, select it and validate.
If the Operator logo is present (depending on model), activate the display ( /).
To ensure optimal screen legibility, follow the recommendations below:
-check that you have removed the plastic protective film,
-clean the screen of you telephone with a soft dry cloth to remove any finger marks or dust,
-make sure the background brightness is not too strong.
252926853_my411X_FCC_en.book Page 76 Jeudi, 19. juillet 2007 1:28 13
Index 77
/
Accessories 58
Alarm 33
Anonymous mode 42
Battery
Charging the battery 15
Installing the battery 8
Beeps 36
® 14, 18, 25, 29, 33, 35, 38
Business card 18
Calculator 34
Calendar 33
Call barring 45
Calls 13
Automatic redial 43
Call divert 42
Call waiting 43
Counters 42
Display number 42
Camera 24, 46
Confidentiality 45
Contact 16, 25
Call 16
Delete 17
Mailing list 18
Memory 17
Modify 17
Contacts 38
Contrast 42
Converter 34
Cost 45
Currencies 34
Date / Time 37
Display 40
Downloaded objects 27
Energy saving 41
Fixed dialling 45
Games 32
Getting started 11
GPRS 31
Hands-free mode 13
Help 46
Icon 10
Idle screen 10
Input modes 19
Languages 36
Local information 22
252926853_my411X_FCC_en.book Page 77 Jeudi, 19. juillet 2007 1:28 13
78 Index
Memory 23
Messages
Create message 19
Drafts 21
Inbox 21
Outbox 21
Receiving messages 20
Sentbox 21
Templates 21
MMS 19, 25, 35
Multimedia 27
Multimedia objects 27
Music player 29
Navigator 6
Network 12
Networks 43
Operator 45
Operator logo 41
Organiser 38
Phone code 44
Phonebook
New contact 16
Using the phonebook 16
Photo 24, 38, 46
Picture 38
PIN number 44
PIN2 number 44
Ring tones 36
Safety information 55
Screensaver 41
Security 44
Shortcut keys 37
Silent mode 36
SIM card 8, 11
Skins 41
SMS 19
Sound 38
T9 19
Timer 33
To Do 38
ToDo 35
USB 18, 33
USB cable 38
Vibrate 36
Video 24, 26, 38, 46
Voice mail 21
Voicemail 43
Wallpaper 40
WAP 30, 31
Downloading objects 31
WAP logging off 31
WAP logging on 31
Warranty 60, 63
252926853_my411X_FCC_en.book Page 78 Jeudi, 19. juillet 2007 1:28 13
PC software, available as an option:
Pictures, Sounds, Video, SMS, MMS, Contacts, Calendar…
Using the 3G, EDGE or GPRS networks according to your mobile phone capacities
and your subscription
For more information or to buy WellPhone
XT
(*) See chapter ”Connectivity”, page 38 to know the compatible links with your phone.
®
(*)
IRDA (*)
USB (*)
252926853_my411X_FCC_en.book Page 79 Jeudi, 19. juillet 2007 1:28 13
www.sagem.com/mobiles
Le Ponant de Paris - 27, rue Leblanc - 75512 PARIS CEDEX 15 - FRANCE
Société Anonyme
Capital 300 272 000 - 480 108 158 RCS PARIS
07/2007
252926853_my411X_FCC_en.book Page 80 Jeudi, 19. juillet 2007 1:28 13