Sagem Wireless MA220E MA220E User Manual

Sagem Wireless MA220E Users Manual

UserManual.wiki >

Sagem Wireless >

MA220E User Manual HTML Version

Users Manual

CONTENTS

Welcome to SAGEM SA MorphoAccess™ 1

Safety instructions 2

General description 4

Installation instructions 6

Pre-Installation Checklist for the MorphoAccess 6

Initial Installation Procedure 7

Stage 1: Preparing the MorphoAccess cables/wires for installation 7

Stage 2: Positioning and preparing the MorphoAccess for nal installation

against the mounting surface 8

Final installation procedure 10

Stage 1: Wiring the MorphoAccess to the building 10

Stage 2. Fastening the MorphoAccess to the building 11

Stage 3. Installing the MorphoAccess protective visor 12

Stage 4: Testing the MorphoAccess functionality 12

How to upgrade MorphoAccess 200E to 300E 14

Pre-Installation checklist 14

Performing the upgrade 14

Conguring Wiegand vs. Data clock 17

Performing the Conguration 17

Outdoor MorphoAccess Technical characteristics 20

Recommendations 22

Areas containing combustibles 22

General precautions 22

Appendix 1 - Cable conguration tables 23

Appendix 2 - Wall fastener specs 26

Product Warranty, Limitations and Software License 27

Contents

ii 1

Welcome to SAGEM SA MorphoAccess™ 200E / 300E

Congratulations for choosing the SAGEM SA MorphoAccess™

Automatic Fingerprint Recognition Terminal. The MorphoAccess

provides an innovative and effective solution for access control

or time and attendance applications using ngerprint verication

and/or identication.

The MorphoAccess terminal integrates SAGEM image

processing and feature matching algorithms (MorphoSoft™

and MorphoImaging™). This technology is based on lessons

learned during 18 years of experience in the eld of biometric

identication and the creation of literally millions of individual

ngerprint identication records.

We believe you will nd the SAGEM SA MorphoAccess fast,

accurate, easy to use, and suitable for physical access control

or time and attendance.

The SAGEM SA MorphoAccess offers the following

advantages:

- Has been designed for use in outdoor environments, is

protected against water jets and is dust tight

- Has a high quality optical scanner

- Supports multiple input/output interfaces used in the physical

access control industry

- Has a local area network interface for easy interaction with

other host systems

- Is easily installed and integrated into your available ofce

space

- Has an interface that is easy to use in both setup and

operational modes

- Has extensive, exible ash memory for data storage (user

data, biometric templates, etc.)

To ensure proper installation of your SAGEM SA MorphoAccess,

we recommend that you read this Installation Guide in its

entirety.

Introduction

The SAGEM logo and trademark are the property of E.

All other trademarks or product names are trademarks or product names of the respective title

holders.

2 3

Safety instructions - Please Read Before Installation

WARNING: INSTALLATION TO BE PERFORMED BY

PROFESSIONAL INSTALLERS ONLY

Note: These instructions for the installation of the MorphoAccess

assume the installer is properly qualied as a professional,

familiar with applicable industry standards, local building/zoning

codes, and proper installation practices. Installation should not

be attempted by non-professionals.

You are required to use a National Electric Code Class 2 power

supply at 12 V DC ± 5% and 2.5A minimum. This product is

intended to be installed in accordance with the NEC Class 2 r

equirements.

Europe: SAGEM SA hereby declares that the SAGEM SA

MorphoAccess™ has been tested and found compliant with

the below listed standards as required by the EMC Directive

89/336/EEC: EN55022 (1994) / EN55024 (1998) and by the low

voltage Directive 73/23/EEC amended by 93/68/EEC: EN60950

(2000).

USA: This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device

must accept any interference received, including interference

that may cause undesired operation.

If this equipment interferes with radio or television reception

(which can be determined by disconnecting and re-connecting

the unit), the user is encouraged to try to correct the interference

by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and

receiver.

- Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

- Consult the dealer for help.

Safety instructions

2 3

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN

INCORRECT TYPE.

REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE

RECOMMENDED BY THE MANUFACTURER.

MUST BE DISPOSED OF PROPERLY.

Safety instructions

ATTENTION

IL Y A DANGER D'EXPLOSION S'IL Y A REMPLACEMENT

INCORRECT DE LA BATTERIE.

REMPLACER UNIQUEMENT AVEC UNE BATTERIE DU

MÊME TYPE OU D'UN TYPE ÉQUIVALENT RECOMMANDÉ

PAR LE CONSTRUCTEUR.

ELIMINER DE FAÇON APPROPRIÉE.

WARNING: Failure to properly seal the MorphoAccess against the mounting

surface may result in accident or injury. Due to the many types of building

materials that exist, ensuring adequate sealing against the mounting surface

is the sole responsibility of the installer. The mounting gasket provided with

the MorphoAccess is only for the convenience of the installer. For some

applications with rough mounting surfaces, a bead of silicone sealant can

be placed around the entire perimeter of the gasket before placing the

MorphoAccess against the mounting surface.

WARNING: As an additional precaution, take all steps necessary (in

accordance with the National Electric Code) to ensure that if water leaks into

the mounting surface, that no high voltage or other potentially dangerous

wiring, power sources, transformers, or electronics will become wet. This

may include installing high voltage wiring or electronics above the hole

in which MorphoAccess is mounted and waterproong connections as

needed. Providing for safety outside the MorphoAccess packaging is the

sole responsibility of the installer.

4 5

General description

3D View

Display

136 x 34 pixels

Keyboard

Sensor

Mounting slots

(4 places)

Front View

Function keys

Visor

General description

4 5General description

Rear View

Wiegand

RS-485

Power

Ethernet

Multi-function

Wall Gasket

Location

6 7Pre-installation checklist

Installation instructions

The installation instructions are divided into three segments -

The Pre-Installation Checklist, The Initial Installation Procedure,

and the Final Installation Procedure. Each segment lists the

procedures you will perform, followed by the detailed instructions

for each procedure.

Pre-Installation Checklist

1. Installation should be performed by a trained and qualied

installer. Make sure to adhere to all applicable local building

codes. A National Electric Code (NEC) Class 2 power supply

must be used for the MorphoAccess.

2. Prepare for the MorphoAccess installation by selecting a

mounting location that reduces exposure to the environment

as much as possible within easy reach of the door that is

being controlled by the MorphoAccess.

3. Verify that a standard junction box, at least the size of a

dual-gang box, has been installed at the correct height

necessary for the MorphoAccess to meet any local or Federal

requirements for ADA compliance.

4. Verify that there is enough free wall space surrounding

the junction box to accommodate the placement of the

MorphoAccess.

5. Verify that the main power and functional interface cables are

properly wired within the building, per applicable local building

codes, and that wire stubs are accessible within the junction

box where the MorphoAccess will be installed.

6. Turn off the main power to the junction box until the installation

of the MorphoAccess is complete.

Note: Once steps 1 through 6 are complete, the

MorphoAccess is ready for installation.

6 7

Initial Installation Procedure

The Initial Installation Procedure consists of two stages: (1) Preparing the

MorphoAccess cables/wires for installation, and (2) Positioning and preparing

the MorphoAccess for nal installation against the mounting surface.

Stage 1: Preparing the MorphoAccess cables/wires for

installation

1. Identify the MorphoAccess cables that will be wired for your

particular installation requirements, for example, power,

Wiegand, or RS-485.

Note: The Ethernet cable comes prewired for 568B with a

standard RJ45 socket installed. The interface cables have

a protective cover placed over the end of each cable. If

the interface cables are used for an installation, remove

the protective cover in order to perform the necessary

wiring.

2. Familiarize yourself with the cable wire diagrams located in

Appendix 1 of this installation guide.

3. Prepare the MorphoAccess cables for connection to the

building cables as follows:

a. Shorten the MorphoAccess cable stubs as necessary for

each installation.

b. Strip one inch of the cable insulation from the end of each

cable you will be using.

Note: Be careful not to cut the individual wires within

the cables.

c. Strip  -  inch of insulation from the end of each individual

wire you will be connecting.

Note: If you are using self-tapping wire connectors, this

step may not be necessary.

4. Prepare the building cables for installation in the same manner

as described above for the MorphoAccess cables.

Initial installation

8 9

Stage 2: Positioning and preparing the MorphoAccess for nal

installation against the mounting surface

1. If you haven't already done so, use the included hex wrench

to unscrew the four screws securing the MorphoAccess visor

and remove the visor. Place the visor out of the way until

needed at the end of the installation procedure.

2. Lift the MorphoAccess into position near the junction box

and place the wire stubs inside the junction box in order

to temporarily position the device against the mounting

surface.

3. Orient the MorphoAccess against the mounting surface in

the position that it will be permanently mounted with the

cable stub seals centered within the junction box without

any excessive stress applied to the cables.

4. Once you are satised with the location of the device against

the mounting surface, remove the backing from the gasket

material and position the sticky side of the gasket against

the backside of the MorphoAccess ensuring that the gasket

material does not cover the mounting holes.

5. Once the MorphoAccess is properly positioned against the

mounting surface, mark the location of the four fasteners at

the center of the four oval slots, cut out in the ange, that

surrounds the MorphoAccess. (See diagram on Page 5)

6. Once the four fastener locations are marked, remove the

MorphoAccess from against the mounting surface and place

in a safe location, out of the way from your work area.

7. Drill and prepare the holes for the four fasteners.

Note: The MorphoAccess comes with four Alligator™

anchors. These anchors can be used to mount the device

to any surface, of any thickness above 1/4" (6mm).

For complete technical specications for the Alligator

anchor please visit: http://www.toggler.com/pdf/

alligator.pdf

Positioning and preparing the MorphoAccess

8 9

For other types of surfaces you should select an appropriate

anchor that is rated to support a minimum of 5 lb (2.25 kg).

See Appendix 2, p. 26 for generic bolt specications.

Note: A variety of fasteners can be used to mount the

MorphoAccess to different types of material. The mounting

holes must be prepared according to the type of fastener

being used for an installation and the type of material

the MorphoAccess is being mounted against. Use "best

practices" installation procedures for the type of fastener

being used.

8. Once the fastener locations are properly prepared for accepting

the fasteners, temporarily mount the MorphoAccess to the

mounting surface to check for proper alignment of the

fasteners and placement.

9. To temporarily mount the MorphoAccess, lift the device into

position near the junction box and place the wire stubs inside

the junction box in order to position it against the mounting

surface.

10. Fasten the device to the mounting surface with the four

fasteners.

11. If you are satised with the mounting, remove the device

from the wall and place it in a safe location, away from your

work area. If you need to make an adjustment, remove the

MorphoAccess from the wall and make the adjustment

accordingly.

You are now ready for the nal installation procedure.

Positioning and preparing the MorphoAccess

10 11

Final Installation Procedure

The Final Installation Procedure includes four stages: (1) Wiring

MorphoAccess to the building, (2) Fastening MorphoAccess to

the building, (3) Installing the MorphoAccess protective visor,

and (4) Testing MorphoAccess functionality.

Stage 1: Wiring MorphoAccess to the building

1. Position MorphoAccess in such a way that the wire stubs are

conveniently placed within reach of the building wire stubs.

Note: To accomplish this may require placing the

MorphoAccess on a stool or other secure work surface in

order to position it at a height that allows the installer

to conveniently connect the wires to the building wires

without needing to physically hold the device in position.

2. Refer to the cable wire diagram provided in Appendix 1 of

this installation guide for the color coding of each individual

wire that will be connected for your installation.

Note: Wiring the MorphoAccess includes connecting the

interface wires rst, then connecting the power wires. Once

all wires have been properly connected and sealed against

the elements, MorphoAccess will be ready to be secured

to the mounting surface.

4. Connect each MorphoAccess wire to the corresponding wire

in the building cables. Take care when connecting the wires

in order not to damage the individual wires and to ensure a

positive connection. Each wire should be properly wrapped

or sealed in order to ensure uninterrupted service to the

device. Follow NEC installation requirements when wiring

this device.

FInal Installation

10 11

Stage 2. Fastening MorphoAccess to the building

1. To complete permanent mounting of the MorphoAccess,

neatly wind and place the cable harness inside the junction

box without any excessive stress applied to the harness.

This will facilitate the mounting of the device tight against the

mounting surface.

2. Once the wire harness is in place in the junction box, place the

device against the mounting surface and align the slots in the

ange with the holes in the mounting surface.

Note: The mounting holes should have been pre-drilled

and prepared for installation as outlined earlier in the Initial

Installation Procedure.

3. Once the device is properly placed against the mounting

surface, ensure that it makes a positive sealed connection

between the mounting surface and the gasket on the back

of the device.

Note: To ensure a watertight seal on rough mounting

surfaces, a bead of silicone sealant can be placed around the

entire perimeter of the gasket before placing MorphoAccess

against the mounting surface.

4. Install the four screws through the slots in the ange into the

four prepared mounting holes. Tighten the mounting screws.

Note: Be careful not to overtighten the screws or the front

housing will bend visibly under the bolt heads.

Note: If you use mounting screws that pass through the

mounting surface (such as a thin wall or an electrical

mounting box), be sure to seal the mounting screw holes

per the NEC for outdoor installations.

Final installation

12 13

Stage 3. Installing the MorphoAccess protective visor

Warning: The protective visor must be installed in order to

protect the nger imaging scanner and the LCD display from

direct sunlight and dripping water.

1. Place the protective visor over the MorphoAccess and align

the four mounting holes on the visor with the four mounting

holes on the ange.

2. Re-attach the visor to the ange with the included four screws

and washers using the included hex wrench. Firmly tighten

each screw to 8 in-lb (0.90 N-m).

3. Place the provided screw caps over each screw to complete

a nished look.

4. Remove the protective lm covering the LCD window.

Stage 4: Testing MorphoAccess functionality

1. Once the installation is complete, turn on the main power to

the MorphoAccess.

2. Inspect the MorphoAccess and verify that it powers up and

proceeds to the main screen.

3. Inspect the LCD and verify that the contrast and brightness

settings make the screen readable. If the LCD is not readable,

see the setup menu in the Software Guide for how to adjust

the contrast and brightness of the LCD screen.

4. Inspect the scanner and verify that the scanner is glowing

red.

5. Have the Administrator perform an enrollment and verify that

the enrollment is successful.

Note: This step depends on the type of system conguration

and may not be appropriate for all installations.

Final installation

12 13Final installation

6. Perform an identification and verify that the door opens

correctly.

Note: This step depends on the type of system

conguration and may not be appropriate or available for

all installations.

Note: If any unexplained problems occur, please contact

the company where you purchased the MorphoAccess for

troubleshooting instructions.

Installation of MorphoAccess is now complete.

14 15Upgrading

How to upgrade MorphoAccess™ 200E to 300E

Pre-Installation checklist

This is a memory upgrade which, when installed, provides the

capability to manage 16 biometric databases of 3,000 records

each for a total of 48,000 people.

Note: This memory upgrade must be performed by authorized

personnel only. Any work carried out by non-authorized

personnel will invalidate your warranty.

Warning: Make sure the existing database residing on the

MorphoAccess 200 has been backed up before continuing

with this upgrade.All existing database information in the

MorphoAccess 200 will be lost during this procedure. If

transferring a memory module from one MorphoAccess 300

to another, all database information contained on the module

will be lost.

Performing the upgrade

1. Remove the MorphoAccess visor screw caps, with a small

straight blade scewdriver, and then remove the four visor

screws, using the included hex wrench, and disconnect the

MorphoAccess from the mounting surface and make sure

the main power to the device is turned off.

2. Unscrew the front housing from the back housing by removing

the four screws securing the two halves together using the

included hex wrench.

3. Carefully separate the front and rear housing.

Note: Carefully disconnect the cables between the front

and rear housing before completely separating the two

halves.

4. Turn the front housing upside down in order to look inside.

Identify the location of the memory module by looking at the

picture on the next page.

14 15

Memory module upgrade

Gasket seal

The word "DOWN"

is printed on the

lower right corner

of the module.

5. Use approved static discharge protection. Remove the memory

module from its protective ESD packaging.

6. Orient the memory module correctly by rotating the module so

that the word "DOWN" is located in the bottom right corner

of the module.

7. Place the memory module in position over the two 24-pin

connectors and press the module into place. Use rm, even

pressure on both connectors at the same time to seat the

module in place.

The word "UP"

is printed on the

module in the upper

left corner.

Upgrading

16 17

Note: The module should press into place rmly without

much resistance. If it appears that excessive force is

required to seat the module, remove the module and

visually inspect the pins on the MorphoAccess circuit board

to ensure that the pins are not bent out of alignment.

8. Visually inspect the gasket which provides a positive seal

between the two halves of the housing. Ensure that the

gasket is properly seated within the frame on the front half

of the housing.

Note: If the gasket appears to be damaged, contact your

MorphoAccess vendor to order a replacement gasket

before proceeding.

9. Carefully reconnect the ribbon cables between the two halves

of the housing.

10. Place the two halves of the MorphoAccess housing together,

making sure that the gasket maintains its position within the

gasket frame.

11. Screw the two halves together with the four screws and

washers which were removed earlier.

Note: Carefully tighten the four screws to 8 in-lb (0.90 N-

m). Do not overtighten.

12. Screw the visor back onto the housing. Tighten the four

screws to 8 in-lb (0.90 N-m). Place the screw caps into place

over the four screws.

The MorphoAccess is now upgraded.

Upgrading

16 17Conguring Wiegand vs. Data clock

Conguring Wiegand vs. Dataclock

MorphoAccess is congured during manufacturing to support

the Wiegand protocol. If your installation requires supporting

the Dataclock protocol, you will need to perform the following

procedure in order to congure the device to support Dataclock.

You will be taking the housing sections apart and then putting them

back together again in order to perform the conguration.

Note: MorphoAccess can support either Wiegand or

Dataclock. MorphoAccess does NOT support both protocols

simultaneously.

Note: This installation requires the device to be disconnected

from the mounting surface with the main power to the device

turned off.

Performing the Conguration

1. Remove the four visor screw caps and the four screws securing

the visor and remove the visor.

2. Unscrew the front housing from the back housing by removing

the four screws securing the two halves together.

3. Carefully separate the front and rear housing.

Note: Carefully disconnect the cables between the front and

rear housing before completely separating the two halves.

4. Turn the front housing upside down in order to look inside.

Identify the location of the bank of eight vertical jumpers on the

motherboard by looking at the picture on the next page.

18 19

8 jumper bank

5. Once you have identied the location of the vertical jumper

bank, (numbered 1 - 8 from left to right), congure the jumpers

for Dataclock as follows:

Install jumpers on positions 1 and 2. Move jumper from position

7 to position 8. When completed, positions 1, 2, 4, and 8 will

have jumpers installed.

Note: Use jumpers spaced at 2 mm on center. If needed,

jumpers are available from your MorphoAccess supplier.

gasket seal

Conguring Wiegand vs. Data clock

18 19

Note: Once you have attached the jumpers as described,

the conguration is complete.

Putting the device back together

1. Visually inspect the gasket, which provides a positive seal

between the two halves of the housing. Ensure that the gasket

is properly seated within the frame on the front half of the

housing.

Note: If the gasket appears to be damaged, contact your

MorphoAccess vendor to order a replacement gasket

before proceeding.

2. Carefully reconnect the cables between the two halves of the

housing.

3. Place the two halves of the housing together making sure that

the gasket maintains its position within the gasket frame.

5. Screw the two halves together with the four screws that were

removed earlier.

Note: Carefully tighten the four screws to 8 in-lb (0.90 N-

m). Do not over tighten.

6. Screw the visor back onto the housing. Tighten the four screws

to 8 in-lb (0.90 N-m). Place the screw caps into place over

the four screws.

The MorphoAccess is now congured for Dataclock.

Conguring Wiegand vs. Data clock

20 21

MorphoAccess Technical Characteristics

Display

• Backlit LCD 136 x 34 pixels

Keyboard

• 12 numeric keys

• 4 function keys

Fuse

• 2.5 amp quick blow

Memory

• 8 megabytes RAM

• 4 megabytes memory for Operating System, Biometric

Libraries, and Applications

• Optional 32-Mbyte memory for data storage.

Peripheral interfaces

• RS-485 / RS-422

• Ethernet 10 Base T

• Wiegand or Dataclock output

• Wiegand or Dataclock input

• Relay

• Tamper switch

Technical characteristics

20 21

Power supply

• NEC Class 2, at 12 V DC ± 5%; 2.5A minimum

Note: Cable cross section depends on the length:

0.75 mm² recommended.

Size and weight

This product is designed to be installed outdoors.

• 8.6 inches wide x 11.4 inches high x 3.9 inches deep

• Approximately 4.5 pounds

Environmental conditions

• Operating temperature -10°C to + 45°C

• Humidity 0% to 90%, non-condensing

• Fluid ingress and dust protection Rated for IP 65

Storage conditions

• Temperature - 40°C to + 70°C

• Humidity 0 % t o 9 5 % , i n c l u d i n g

condensation

Technical characteristics

22 23

Recommendations

Areas containing combustibles

It is strongly recommended that you do not install your

MorphoAccess in the vicinity of gas stations, petroleum

processing facilities or any other facility containing amable or

combustable gasses or materials.

General precautions

• Do not attempt to repair your MorphoAccess yourself.

The manufacturer cannot be held responsible for any

damage/accident that may result from attempts to repair

components.

• Any work carried out by non-authorized personnel will

invalidate your warranty.

• Do not expose your MorphoAccess to temperatures outside

its specied operation and storage ranges.

• Use your MorphoAccess with original accessories. Attempts

to integrate the MorphoAccess with unapproved accessories

will void your warranty.

• Due to electrostatic discharge, and depending on the

environment, synthetic carpet should be avoided in areas

where the device has been installed.

Warning: The manufacturer cannot be held responsible

if the above recommendations are not followed or if the

MorphoAccess is used incorrectly.

Recommendations

22 23

NOTE: The Wiegand electrical interface conforms to the Security Industry

Association Wiegand standard (March 1995). MorphoAccess outputs 26-bit

Wiegand reverse.

NOTE: To wire MorphoAccess for Dataclock out interface use the Wiegand

cable as follows. Green = Data Out; White = Clock Out; Black = Ground. To

congure MorphoAccess to output Dataclock (refer to pages 18-20).

NOTE: MorphoAccess Ethernet wiring follows the T568B standard. Use a

straight-through cable between MorphoAccess and a hub. Use a crossover

cable between MorphoAccess and a PC.

Appendix 1 - Cable conguration table

Appendix 1

This table lists the cables and the function of each wire in each cable. It is

to be used as a reference to wire the Outdoor MorphoAccess for power and

interface functionality. (See diagram on Page 26 for location of the different

cables.)

Power Cable

Color Function

White

Black

+ 12V

Ground

Wiegand Cable

Color Function

Green

White

Brown

Black

Purple

Red

Orange

Yellow

Blue

Shield (drain)

Wiegand Out

Wiegand In

D 0

D 1

LED

GND

+ 12V

LED

D 1

D 0

Not Connected

24 25Appendix 1

Deister Card Reader Interface:

To Interface the optional Deister contactless card reader, connect the

Deister AB wires to the RS-485 cable Tx port as follows:

Wire A to Tx+

Wire B to Tx-

NOTE: The tamper switch is opened when the Morpho-

Access is opened, thereby disabling the MorphoAccess.

Relay Ratings:

1 A at 30 VDC according to the extra low voltage safety requirements

(42.4 VAC max, 60 VDC max) independent of the power supply.

RS-485 Cable

Color/stripe Function

Green/White

White/Green

Orange/White

White/Orange

Red/Orange

RX+

RX-

TX+

TX-

GND

Multi-Function Cable

Color Function

Black

White

Green

Brown

Blue

Gray

GND

Tamper Switch

Relay 2, Common

Relay 2, Normally Closed

Relay 2, Normally Open

24 25Appendix 1

Rear View

Location of Cables

Multi-function

Ethernet

Power

Wiegand

RS485

26 27

Appendix 2 - Wall fastener specs

If the mounting bolts provided with the MorphoAccess do not

meet your specic needs for a particular installation, the following

specication provides information necessary to select a bolt that

will properly support the MorphoAccess.

Maximum bolt UNC #10

Minimum length of threads 1-7/8 inches

Minimum shear strength of bolt 5 lb or more

Appendix 2

26 27

MORPHO® BRAND BIOMETRIC PRODUCT

WARRANTY, LIMITATIONS, AND SOFTWARE

LICENSE

1. LIMITED WARRANTY AND MAINTENANCE. Subject to the Disclaimers and

Limitations of Warranty set forth below, SAGEM MORPHO, Inc., (hereinafter “SMI,” or

its licensed reseller, as may be applicable) provide the following limited warranty, for the

benet of original Customer only, that all hardware components of the Morpho® brand

biometric product with which this information is associated will conform to the applicable

hardware product specications as published by SMI and will be in good working order

and free from material defects in materials or workmanship, given Customer’s normal

use and service (the “Hardware Limited Warranty”). It is further warranted that the

Morpho® brand biometric software provided with, and/or loaded into and resident in

the biometric product will conform to the applicable software specications or SMI

documentation published by SMI, given Customer’s normal use and operation (the

“Software Limited Warranty”). Any and all third party software programs supplied

with the biometric product are subject to their respective manufacturer’s warranty and

license terms only, and SMI assumes no responsibility for such software.

The Hardware Limited Warranty extends for one (1) year from the date of Customer’s

receipt of delivery of the biometric product. The Software Limited Warranty extends

for ninety (90) days from the date of Customer’s receipt of delivery of the biometric

product. During the duration of the Hardware and Software Limited Warranties, the rst

level of support shall be provided by telephone “Help Desk” support (the applicable

Help Desk telephone number is included with the packaged biometric product).

Hardware repairs which cannot be remedied through Help Desk consultation shall

be made by returning the hardware component to an authorized SMI service depot,

in accordance with instructions issued by the service depot, at Customer’s expense.

Return delivery of the repaired or replaced component shall be at SMI’s expense. SMI

shall repair or replace any nonconforming hardware component at its sole election.

Software problems not remedied through Help Desk consultation may be corrected

through software patches or updates issued by SMI or by replacement of the unit in

which the software is resident, at SMI’s sole election. The Limited Software Warranty

does not entitle the customer to automatically receive patches, updates or other

notication of software correction or revision during the duration of the warranty. The

original warrantyperiods shall not be renewed or extended by subsequent repair or

replacement.

Biometric product maintenance after expiration of the one (1) year warranty may be

available pursuant to the terms and conditions of a separate Maintenance Agreement

– please contact the location from which the biometric product was purchased for

further details.

2. LIMITATIONS AND DISCLAIMERS OF WARRANTY.

SMI does not warrant that operation of the biometric product will be

uninterrupted or error-free; further, no biometric product or system can be guaranteed

to be 100% accurate, or to properly enroll, identify, or authenticate every individual.

SMI shall have no responsibility for repairing or otherwise remedying any defect or

Warranty

28 29

nonconformity in the condition or operation of the biometric product or its software if: 1)

modications to Customer’s site are necessary for proper operation, and Customer’s

site preparation is inadequate; 2) the biometric product is not professionally installed

in accordance with applicable industry standards, local building/zoning codes such as

the National Electric Code, and proper installation practices; 3) the biometric product

is not maintained and operated with all proper accessories under normal conditions

by competent personnel; 4) the biometric product incorporates replacement parts

not authorized by SMI; 5) the biometric product has been subjected to disassembly

except as required for normal installation, modication beyond what is described in

SMI-supplied installation and operation guides, unauthorized enhancement, abuse

or misuse; or 6) the defect or nonconformity has not been reported to the designated

Help Desk within ten (10) days of its discovery by Customer. As Customer’s sole

and exclusive remedy for any nonconformity or defect in the condition or operation of

the biometric product for which SMI is responsible, SMI shall provide its reasonable

efforts to remedy same as set forth in Section 1, above during the applicable stated

Limited Warranty Period. With the exception of its Limited Warranties set forth in

Section 1, above, TO THE MAXIMUM EXTENT ALLOWED BY APPLICABLE

LAW, SMI DISCLAIMS ANY AND ALL PROMISES, REPRESENTATIONS AND

WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE BIOMETRIC

PRODUCT, ITS HARDWARE, SOFTWARE, DESIGN, OR FUNCTIONALITY, OR

ITS MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, OR

ARISING FROM USAGE OF TRADE, COURSE OF DEALING, OR COURSE

OF PERFORMANCE. SMI FURTHER DISCLAIMS ANY AND ALL PROMISES,

REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, WITH

RESPECT TO ANY OF SMI’S SERVICES PERFORMED HEREUNDER.

3. LIMITATIONS OF LIABILITY. The entire liability of SMI to Customer (or to

any person or entity claiming through Customer) for any claim whatsoever related to

the biometric product or the parties’ transaction shall not exceed the total amount of

all payments made for the biometric product by Customer to the date of the claim. IN

NO EVENT SHALL SMI BE LIABLE TO CUSTOMER FOR ANY LOST PROFITS,

LOST INFORMATION, BUSINESS INTERRUPTION, OR OTHER CONSEQUENTIAL,

INCIDENTAL, SPECIAL, PUNITIVE OR INDIRECT DAMAGES (WHETHER IN AN

ACTION IN CONTRACT OR TORT OR BASED ON WARRANTY), EVEN IF SMI HAS

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, ARISING OUT OF,

OR RELATED TO, THE BIOMETRIC PRODUCT OR THE PARTIES’ TRANSACTION.

Some jurisdictions do not allow excluding or limiting implied warranties, or limiting

liability for incidental or consequential damages, and some jurisdictions have special

statutory consumer protection provisions that may supersede this limitation. As a

result, the limitations and disclaimers of warranty and liability set forth herein may not

apply to Customer if prohibited by the laws of Customer’s jurisdiction.

4. RESTRICTION ON EXPORTATION. Certain biometric products and

associated software may have restrictions upon their exportation outside the United

States of America, and the applicable U.S. Government regulations and restrictions

are subject to frequent change. Customer shall comply with all applicable laws, rules

and regulations of governmental authorities, now or hereafter in effect, including,

Warranty

28 29

without limitation, the U.S. Export Administration Act and other U.S. export controls.

Customer agrees that Customer will not export or re-export, directly or indirectly, the

SMI biometric products or software to any country, person, or entity subject to U.S.

export restrictions.

Warranty

s™

™

M142-005C

September 2003

SAGEM MORPHO, Inc.

Tacoma, Washington 98402

Contents

FCC Compliance of MorphoAccess™ 200, 220, 300, 200E, 220E, and 300E ......................3

Installing Ferrite Beads on Interface Cables for MorphoAccess™ 200 and 300 ....................3

Installing Ferrite Beads on Interface Cables for MorphoAccess™ 220 ..................................5

MorphoAccess™ Motherboard Jumper Configuration............................................................7

MorphoAccess™ Serial Port is RS-422 Only .........................................................................8

Ethernet Connections to MorphoAccess™.............................................................................8

MorphoAccess™ 300 Memory Extension Board....................................................................8

MorphoAccess™ Power Supply Selection Outside the United States....................................8

MorphoAccess Installation Guide Update  SAGEM MORPHO, Inc. 2003. All Rights

Reserved.

This manual, as well as the software described in it, is furnished under license and may be

used or copied only in accordance with the terms of such license. The content of this

manual is furnished for informational use only, is subject to change without notice, and

should not be construed as a commitment by SAGEM MORPHO, Inc. SAGEM MORPHO, Inc.

assumes no responsibility or liability for errors or inaccuracies that may appear in this

documentation, and it is furnished “AS IS,” with no warranties of any kind, express or

implied. Except as may be permitted by the license, no part of this manual may be

reproduced, stored in a retrieval system, or transmitted in any form or by any means,

without the prior written permission of SAGEM MORPHO, Inc.

“SAGEM,” “MORPHO,” and the SAGEM logo are U.S. registered trademarks of SAGEM SA.

All other product and company names which may be referenced herein are trademarks or

servicemarks of their respective owners.

MorphoAccess Terminal Installation Guide Update, Document M142-005C

SAGEM MORPHO, Inc., 1145 Broadway Plaza, Tacoma, WA 98402 USA

September 2003

FCC Compliance of MorphoAccess™ 200, 220, 300,

200E, 220E, and 300E

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired

operation.

This FCC compliance is for MorphoAccess™ products as delivered to you, the customer.

Any changes or modifications not expressly approved by SAGEM MORPHO, Inc. could void

your authority to operate MorphoAccess™ products.

Installing Ferrite Beads on Interface Cables for

MorphoAccess™ 200 and 300

This document provides an overview of ferrite beads and explains how to install them on the

power, Wiegand, RS-422, and Ethernet cables that you connect to the MorphoAccess™ 200

or 300. To meet FCC requirements for Class B computing devices, a ferrite bead must be

installed on every cable connected to the MorphoAccess 200 or 300 — only if the

MorphoAccess serial number starts with 01 or 02.

What is a Ferrite Bead?

Ferrite beads are radio frequency (RF) absorbers. To see an example of a ferrite bead, look

at a monitor video cable or a laptop computer power cable that is connected to your

computer. The walnut-sized protrusion that is molded near one end of the cable is a ferrite

bead. The size and shape of the ferrite bead determines the amount of RF that is absorbed.

The amount of RF that a device emits determines the type of ferrite bead that is required to

provide the proper absorption.

The ferrite beads supplied with your MorphoAccess 200 or 300 terminal have been properly

sized to absorb the correct amount of RF to comply with FCC requirements.

Installing a Ferrite Bead

Check the serial number on the back of the MorphoAccess. If the serial number starts with

01 or 02, install one ferrite bead on each cable before you install the MorphoAccess 200 or

300 terminal.

Ordering Ferrite Beads

To order more ferrite beads (Ferrico F5-NF-80B) for your MorphoAccess 200 or 300

interface cable, contact SAGEM MORPHO, Inc. at 1-800-526-2674. Ask for part number

1205-294001-0.

1. Select the interface cable that you want to

work with and open a ferrite bead by releasing

the clasps on the side.

2. Position the ferrite bead on the cable as close

as possible to (but not inside) the

MorphoAccess.

Lay the cable inside the groove.

3. Bend the cable around the ferrite bead to form a

loop and lay it again inside the ferrite bead.

Make sure the cable circles the ferrite bead so

that it passes through the ferrite bead twice.

4. Close the two halves of the ferrite bead and

securely fasten the clasps without pinching the

cables.

Installing Ferrite Beads on Interface Cables for

MorphoAccess™ 220

This document provides an overview of ferrite beads and explains how to install them on the

power, Wiegand, RS-422, and Ethernet cables that you connect to the MorphoAccess™

220. To meet FCC requirements for Class B computing devices, a ferrite bead must be

installed on all cables connected to the MorphoAccess.

What is a Ferrite Bead?

Ferrite beads are radio frequency (RF) absorbers. To see an example of a ferrite bead, look

at a monitor video cable or a laptop computer power cable that is connected to your

computer. The walnut-sized protrusion that is molded near one end of the cable is a ferrite

bead. The size and shape of the ferrite bead determines the amount of RF that is absorbed.

The amount of RF that a device emits determines the type of ferrite bead that is required to

provide the proper absorption.

The ferrite beads supplied with your MorphoAccess 220 terminal have been properly sized

to absorb the correct amount of RF to comply with FCC requirements.

Installing a Ferrite Bead

After all the cables have been routed through the wall, place a single ferrite bead around all

of them before you install the MorphoAccess 220 terminal. See instructions below. The

foam strip will be compressed in the ferrite bead to prevent the ferrite bead from slipping

down the cable.

1. Open a ferrite bead by releasing the clasp on the side.

2. Determine where the ferrite bead will be positioned on the cables. It should be

positioned as close as possible (but not inside) to the MorphoAccess terminal.

Ensure that sufficient cable slack will be available to route the cables inside the

MorphoAccess and to attach the wires to the terminal block.

3. Wrap the foam tightly around all the

cables at the position where the ferrite

bead will be placed.

4. Lay the foam-wrapped cable inside the

groove of the ferrite bead.

5. Close the two halves of the ferrite bead

and securely fasten the clasps.

If the ferrite bead does not close easily,

trim the foam slightly, but not so much

that the ferrite bead will slide away from

the terminal.

Ordering Ferrite Beads or Foam Cable Wrap for Ferrites

To order more ferrite beads (Fair-Rite 04441 73551) for your MorphoAccess 220 interface

cables, contact SAGEM MORPHO, Inc. at 1-800-526-2674. Ask for part number 1205-364001-

0. To order more foam cable wrap for ferrites, ask for part number 0999-900019-0.

MorphoAccess™ Motherboard Jumper Configuration

SW1: Wiegand input

Open = Wiegand Mode (default)

Closed = Dataclock Mode

SW2: Wiegand output

Open = Wiegand Mode (default)

Closed = Dataclock Mode

SW3-6: Reserved (MA200/300)

SW3 must be open =

SW4 must be closed =

SW5 must be open =

SW6 must be open =

SW3-6: Reserved (MA220)

SW3 must be closed

SW4 must be open

SW5 must be open

SW6 must be closed

SW7-8: Wiegand Input (Interrupts)

Open Open = Not allowed

Closed Open = Wiegand Mode (default)

Open Closed = Dataclock Mode

Closed Closed = Not allowed

MorphoAccess™ Serial Port is RS-422 Only

The COM1 serial port supported in all MorphoAccess™ products is RS-422 only, not RS-

485 as shown in the installation guides. Below is the correct RS-422 wiring diagram for

MorphoAccess™ 200E, 220E, and 300E (outdoor units).

RS-422 Cable

Color/stripe Function

White/Green RX+

Green/White RX-

White/Orange TX+

Orange/White TX-

Blue/White GND

Ethernet Connections to MorphoAccess™

It is recommended to use shielded category 5 (Cat 5) Ethernet cable (120 ohm impedance).

It is also strongly recommended to install a repeater unit every 300 ft (90 m). Extreme care

must be taken when connecting the Ethernet wires to the terminal block board during

installation, since low quality connections may degrade the Ethernet signal sensitivity. The

receive wires Rx+ and Rx- should be connected from the same twisted pair of wires, and the

transmit wires Tx+ and Tx- should also be connected from the same twisted pair of wires.

MorphoAccess™ 300 Memory Extension Board

Under certain very harsh shipping conditions, the memory extension board of the

MorphoAccess™ 300 (indoor MorphoAccess only) might become disconnected. You should

check that the memory board is properly attached before connecting power to the

MorphoAccess 300. When you disassemble the MorphoAccess 300 to mount it on a wall,

make sure the memory board is properly aligned with the pins (see page 9 of the Installation

Guide). There are two sets of 26 connector pins, but each connector on the memory

extension board has only 24 socket holes. Align the memory extension board such that it

uses the sets of 24 pins closest to the large silver shield. Push on the memory extension

board to make sure it is firmly seated on the connector pins.

MorphoAccess™ Power Supply Selection Outside the

United States

When any model MorphoAccess™ is installed, it is the responsibility of the installer to

provide an IEC 60950-certified power supply that is marked Limited Power Source (or

“LPS”) and rated at 12 VDC, 2.5 A minimum. This applies to indoor units (MA200, 220, and

300) as well as outdoor units (MA200E, 220E, and 300E).

CONTENTS

Introduction 1

MorphoAccess™ Software User Interface V.4.2 23

Applicant recognition application 23

MorphoAccess Software Administrator Interface 31

Biometric management operations 32

Access the set up functions of the system 37

The CONFIG menu 39

The VERSION menu 69

The SERIAL NUMBER menu 70

The SETTING menu 71

Communication protocol 75

Appendix 1 - Wiegand data format 76

Appendix 2 - ISO 7811/2-1995 - Track 2 Data clock format 77

Appendix 3 - Reserved conguration values 79

Product Warranty, Limitations and Software License 80

End User Software License 82

Contents

Thanks for choosing the MorphoAccess™ Automatic Fingerprint

Recognition Terminal. MorphoAccess provides an innovative

and effective solution for access control or time and attendance

applications using ngerprint verication and/or identication.

The MorphoAccess terminal integrates SAGEM image

processing and feature matching algorithms (MorphoSoft™

and MorphoImaging™). This technology is based on lessons

learned during 18 years of experience in the eld of biometric

identication and the creation of literally millions of individual

ngerprint identication records.

We believe you will nd the MorphoAccess fast, accurate, easy

to use and suitable for physical access control or time and

attendance.

The MorphoAccess offers the following advantages:

• Has a high quality optical scanner.

• Supports multiple input/output interfaces used in the physical

access control industry.

• Has a local area network interface for easy interaction with

other host systems.

• Is compact in size for easy installation and integration into

your available ofce space.

• Has an Intuitive interface that is easy to use in both setup

and operational modes.

• Has extensive, flexible flash memory for data storage,

including user data and biometric templates.

Introduction

2 3

This guide allows you to congure the software parameters to

meet your installation requirements.The following lists some of

the congurable parameters:

• Administrator mode versus User mode

• Identication versus Authentication

• Standalone versus Client/Server

• Database management functions – enroll or delete

• Congure network parameters

• Congure juvenile processing

• Set matching threshold

• Set language preference – English, French, or Spanish

• Congure Welcome message

• Setup Wiegand and Data clock codes/parameters

• Congure COM port

• Congure relays

• Adjust contrast and brightness

• Set clock

To ensure the most effective use of your MorphoAccess, we

recommend that you read this Software Guide in its entirety.

Introduction

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 23

MORPHOACCESSTM SOFTWARE USER INTERFACE

The SAGEM SA MorphoAccess™ terminal can operate in three

modes: access control by identification, access control by

authentication and proxy mode. Those modes are set in the

Maccess/Admin/Mode configuration key.

The MorphoAccess™ 200 manages one base of 800(1) persons,

locally or remotely. MorphoAccess™ 300 manages 16 bases of

3000 persons, remotely(2).

Access control by identification (MorphoAccess™ 200)

To configure MorphoAccess™ terminal in this mode, use the

system and edit /cfg/Maccess/Admin/mode, then enter 0.

After starting the MorphoAccess™ terminal, waits for fingerprint

detection in identification mode.

(1) In stand alone mode, the local base is sized for 800 persons, 2 fingers.

In MMS mode, it is possible to manage up to 1000 persons in a base, 2 fingers.

(2) For more information, see MorphoAccess™ Host System Interface Specification

Ref.: 3000005996.

Place your finger

for identification

Please

manuel.book Page 23 Vendredi, 30. mai 2003 12:21 12

24 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

If the identification is successful, the terminal triggers the access

or returns the corresponding ID to central security controller(3).

Once the person’s identification is done, the terminal automatically

loops back and waits for a new finger. This display remains for

about 4 seconds.

(3) Port used to exchange ID is either Weigand/Dataclock or COM1/COM2. The ID format send to COM port

is described on Communication protocol section.

Welcome

707251

IDENTIFIED

✔✔

✔

manuel.book Page 24 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 25

Access control by identification (MorphoAccess™ 300)

To configure the MorphoAccess™ in this mode, use Asystem and

edit /cfg/Maccess/Admin/mode, then enter 0.

After starting the MorphoAccess™ terminal, waits for fingerprint

detection in identification mode.

To select a user database, just press a key number to toggle the

base number. Only bases 0 to 15 can be selected and used.

Place your finger

for identification

Please

Base does not exist

Please select

another one

Place your finger

for identification

Please

Key 1 pressed

Key 5 pressed

Original Identification

Screen using base 0

Now using base 1

Base 11 selected but

not used

manuel.book Page 25 Vendredi, 30. mai 2003 12:21 12

26 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

If the identification is successful, the terminal triggers the access

or returns the corresponding ID to central security controller.

Once the person’s identification is done, the terminal automatically

loops back, selects base 0 and waits for a new finger. This display

remains for about 4 seconds.

Access control by authentication (MorphoAccess™ 200

and 300)

To configure the MorphoAccess™ in this mode, use Asystem and

edit /cfg/Maccess/Admin/mode, then enter 1.

This mode requires a peripheral equipment which will send the ID

of the person to authenticate to the MorphoAccess™ Wiegand or

Dataclock input.

Place your finger

for identification

Please

Place your finger

for identification

Please

Key 3 pressed

Now using base 15

Now using base 0

because base 53

cannot be selected

Welcome

92716

IDENTIFIED

✔✔

✔

manuel.book Page 26 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 27

To trigger authentication:

−if using a MorphoAccess™ 300, select a valid user database as

described in paragraph "Access control by identification".

−pass the user badge so the external reader sends the user ID on

MorphoAccess™ Wiegand or Dataclock input.

If the ID exists in the selected database, the MorphoAccess™

performs an authentication using the biometric templates

associated to this ID.

If the authentication is successful, the terminal triggers the access

or returns the user ID to central security controller.

Once the person’s authentication is done, the terminal

automatically loops back, selects base 0 and waits for a new input

ID. This display remains for about 4 seconds.

When using this feature, ID should be a value between 0 and

65535.

Pass your badge

for Authentication

Please

Authentication of

ID 92716

Place your finger

Welcome

92716

AUTHENTICATED

✔✔

✔

manuel.book Page 27 Vendredi, 30. mai 2003 12:21 12

28 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

Access control by contactless authentication:

ID and templates on a MIFARE card

(MorphoAccess™ 220)

To configure the MorphoAccess in this mode, use Asystem and

edit /cfg/Maccess/Admin/mode, then enter 3.

To trigger authentication, users should present their MIFARE card

to the terminal. MorphoAccess™ will read the ID, the user’s name

and two biometric templates stored on the card.

Read templates are used for a 1:1 matching.

If the authentication is successful, the terminal triggers the access

or returns the user ID to central security controller.

Please present

Contactless

Smart Card

Authentication of

John Smith

Place your finger

Welcome

John SMITH

AUTHENTICATED

✔✔

✔

manuel.book Page 28 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 29

Access control by contactless authentication: ID on a

MIFARE card, local templates (MorphoAccess™ 220)

To configure the MorphoAccess in this mode, use Asystem and

edit /cfg/Maccess/Admin/mode, then enter 4.

To trigger authentication, users should present their MIFARE card

to the terminal. MorphoAccess™ will read the ID stored on the

card.

If the ID exists in the selected database, the MorphoAccess™

performs an authentication using the biometric templates

associated to this ID.

If the authentication is successful, the terminal triggers the access

or returns the user ID to central security controller.

Please present

Contactless

Smart Card

Authentication of

ID 92716

Place your finger

Welcome

92716

AUTHENTICATED

✔✔

✔

manuel.book Page 29 Vendredi, 30. mai 2003 12:21 12

30 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

Proxy mode

This mode allows to control the MorphoAccess™ remotely using a

set of biometric and database management function interface

access commands.

For more information, please contact SAGEM SA or refer to

document 3000005996 MorphoAccess™ Host System Interface

Specification.

To configure the MorphoAccess™ in this mode, use Asystem and

edit /cfg/Maccess/Admin/mode, then enter 2.

manuel.book Page 30 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 31

MORPHOACCESSTM SOFTWARE ADMINISTRATOR

INTERFACE

Application of the SAGEM SA MorphoAccess™ terminal allows:

1. Biometric management operations

−Transfer of biometric data between the MorphoAccess™

terminal and MorphoAccess™ Management System (MMS).

−In stand alone without the MorphoAccess™ management

system (manages the biometric data in a local database on

the MorphoAccess™) (MorphoAccess™ 200 only).

−The MorphoAccess™ shall be configured in one of either of

these modes (see this chapter).

2. Access to the set up functions of the system (request

Administrator mode).

Note 1

The MMS handles the MorphoAccess™ through a set of

command exchanges (two-way commands to and from the MMS

server and the MorphoAccess™ terminal). If you wish to know

more about this protocol and the command set, please contact

SAGEM SA.

Note 2

For further information about the application protocol between

MorphoAccess™. and MMS, please contact SAGEM SA. The

specification document has the following reference:

MorphoAccess™ Host System Interface Specification

Ref.: 3000005996.

System overviewSystem overview

System overview

Wiegand / Dataclock

▼▼

▼

▼▼

▼

MorphoAccess™MorphoAccess™

MorphoAccess™

COM1 RS422

COM2 RS232

Host local / MMS

Ethernet

Host local / MMS

manuel.book Page 31 Vendredi, 30. mai 2003 12:21 12

32 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

Biometric management operations

Biometric Management between terminal and

MorphoAccess™ Management System (MMS)(4)

MorphoAccess™ terminal includes an interface layer to

communicate with the access control system or the MMS through

Ethernet, RS422 and RS232 (For more information, see section

Setting up Network Parameters).

The biometric management operations are:

−Insert template/ID in database: The terminal inserts a new

record in the database.

−Remove template/ID from database: The terminal removes the

record identified by the ID in the database.

−Update template/ID in database: The terminal changes the

template identified by the ID in the database.

−Download database: The terminal reads the new database and

installs it in a local database according to the database identifier.

If the MorphoAccess™ application receives the commands from

MMS it will switch to base management mode. The operations

sent by MMS are automatically registered in the database of the

MorphoAccess™ terminal.

Managing a base locally is not possible. All biometric data is stored

on the MMS and the terminal will act as a capture and send device

only.

To access the Administrator menu with a MorphoAccess™ 300,

first select the base in which the Administrator is enrolled then hit

the following keys in sequence <#>, <*> and <#>. With a

MorphoAccess™ 200 simply hit the following keys in sequence

<#>, <*> and <#>.

(4) For more information about MMS, please contact SAGEM SA.

manuel.book Page 32 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 33

The next screen is the Administrator screen. The blinking red led

indicates that you are in administrator mode.

Biometric login is enabled if configuration key /cfg/Maccess/admin/

admin ident is set to 1.

This operation creates a database with ID 0. This database can

contain 800 records with two biometric data fields, an ID field and

an Administrator field.

In order to access the Control menu, the Administrator’s fingerprint

template or pin must be entered (the default PIN is 12345). To

enter the pin code(5) select the PIN menu.

You can use the correction key # to delete the last number hit. After

a valid pin code or an Administrator identification, you will see the

following screen:

(5) To change the pin code, see section Use Application System.

Administrator identification

Place your Finger

for identification

PIN EXIT

Administrator identification

Enter Pin : I

OK EXIT

Press <#> for correction

Administrator Mode

Select a command Please

SYSTEM EXIT CL KEYS

manuel.book Page 33 Vendredi, 30. mai 2003 12:21 12

34 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

Biometric management in stand alone(6) (MorphoAccess™

200 only)

In stand alone mode, the MorphoAccess™ manages its own local

database. This can be setup through the Administrator menus. On

the keypad, hit the following keys in sequences <#>, <*> and <#>.

The resulting screen is the Administrator menu.

Biometric login is enabled if configuration key /cfg/Maccess/admin/

admin ident is set to 1.

This operation creates a database with ID 0. This database can

contain 800 records with two biometric data fields, an ID field and

an Administrator field.

In order to access the Control menu, the Administrator’s fingerprint

template or pin code must be entered. To enter the pin code(7),

select the Pin menu.

You can use the correction key # to delete the last number hit.

(6) To change the Biometric management mode, see section Use Application System.

(7) To change the pin code, see section Use Application System.

Administrator identification

Place your Finger

for identification

PIN EXIT

Administrator Identification

Enter Pin : I

OK EXIT

Press <#> for correction

manuel.book Page 34 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 35

If the identification is successful, the application allows access to

the biometric management functions. The biometric management

operations are:

−Insert template/ID in database (enrollment): The terminal inserts

a new record in the database.

−Remove template/ID from database (deletion): The terminal

removes the record identified by the ID in the database.

Insert template/ID in database (MorphoAccess™ 200 only)

To insert template/ID in local database, select the ENROLL menu.

You have to enter the ID of the person and validate it. The primary

and secondary fingers are requested and their corresponding

biometric templates are processed. If the process is successful,

then the person is registered in the local database.

You can use the correction key # to delete the last digit entered. In

the next screen you enroll your finger. Here You choose the user

type Administrator or User.

Administrator Mode

Select a command Please

ENROLL DEL EXIT

ERASE

Enrollment Mode

Enter Person ID : I

OK CANCEL

Press <#> for correction

manuel.book Page 35 Vendredi, 30. mai 2003 12:21 12

36 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

Remove template/ID from database (MorphoAccess™ 200

only)

To remove a single template/ID record from the database, select

the DEL menu. You will then have to enter the ID of the person and

validate it. If the ID number does not exist in the local database, an

error message appears.

You can use the correction key # to delete the last digit entered.

Remove all template/ID from database (MorphoAccess™ 200

only)

To remove all records from the local MorphoAccess™ database,

select the ERASE menu option. A screen appears to confirm your

command.

Deletion Mode

Enter Person ID : I

OK CANCEL

Press <#> for correction

Do you really

want to ERASE

the Database

NO YES

manuel.book Page 36 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 37

Access the set up functions of the system

To access the System Menu, you must leave the main application

of the MorphoAccess™. You must access the Administrator Menus

(see the section Biometric Management in Standalone) if you are

in fingerprint detection mode.

You must select the System Menu.

Then, select the ASYST menu to enter in the system application.

Enter the password to access to SYSTEM MENU (default value:

12345).

You can use the correction key # to delete the last digit entered.

The password can be changed in the configuration file

"/cfg/system" (see the section Setting up Administrator System

Pin). The System Menu will appear when the password is correct.

ASYSTE MACCESS

SYSTEM MENU

Enter Password:

OK CANCEL

Press <#> for correction

manuel.book Page 37 Vendredi, 30. mai 2003 12:21 12

38 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

The CONFIG menu allows you to set up network and third-party

applications and specify additional parameters.

The VERSION item allows you to browse for software modules

present in your SAGEM MorphoAccess™ and see their revision

number(s).

The SER NB item displays the terminal serial number, MicroBoot

revision and Ethernet physical address of your machine.

The MORE key displays the rest of the system options.

The SETTING menu allows you to set the LCD contrast and the

time and date.

SYSTEM MENU

CONFIG VERSION MORE

SER NB

SYSTEM MENU

SETTING EXIT MORE

manuel.book Page 38 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 39

The CONFIG menu

Unreferenced configuration keys are reserved by the application

and must not be changed(8).

Setting up Network Parameters

From the System Menu, press the CONFIG key to access the

configuration files. Press the NEXT key until the file menu shows

"/cfg/net".

−Press the EDIT key. The section menu will show "ip".

−Press the NEXT key until the address menu shows "address",

then press the EDIT key.

You can now edit the IP address of your SAGEM SA

MorphoAccess™.

The LEFT and RIGHT keys move the cursor. The alphanumeric

keys enter digits as necessary. The # key deletes the digit

immediately to the left of the cursor. The EXIT key aborts editing

and restores the previous address value.

(8) For default values, see appendix 4.

PREV NEXT EDIT

EXIT

FILE: cfg/net

PREV NEXT EDIT

EXIT

FILE: cfg/net

SECTION: ip

PREV NEXT EDIT

EXIT

FILE: cfg/net

SECTION: ip

address: 134.1.32.214

manuel.book Page 39 Vendredi, 30. mai 2003 12:21 12

40 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

When finished editing, press the OK key to update the address

field and return to the previous screen.

The IP subnet mask and IP default gateway are set up in the same

way. Contact your network Administrator for these values.

Setting up the System Administrator Pin

From the Set up menu, press the CONFIG key to access the

configuration files. Press the NEXT key until the file menu shows

"/cfg/ system".

Press the EDIT key. The section menu will show "System". Press

the EDIT key again to show "Pwd". You can now edit the password

key to get access to system menu. The default value is "12345".

The LEFT and RIGHT keys move the cursor and the # key deletes

the digit immediately to the left of the cursor. The CANCEL key

aborts editing and restores the previous password value.

LEFT RIGHT OK

CANCEL

cfg/net ip

address

134.1.32.214

PREV NEXT EDIT

EXIT

FILE: cfg/system

SECTION: System

Pwd : 12345

manuel.book Page 40 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 41

Setting up the MorphoAccess™ Administrator Pin

From the Set up menu, press the CONFIG key to access the

configuration files. Press the NEXT key until the file menu shows

"/cfg/ Maccess".

Press the EDIT key. The section menu will show "Admin". Press

the EDIT key again to show "PwdAdmin". You can now edit the

password key to get access to system menu. The default value is

"12345".

The PREV and NEXT keys move the cursor and the # key deletes

the digit immediately to the left of the cursor. The CANCEL key

aborts editing and restores the previous password value.

Setting up Host Communication(9)

This mode allows management of a local database within the

MorphoAccess™. The default value of Host Com key is 3 (MMS).

In this case, the biometric management is between terminal and

MorphoAccess™ Management System (MMS). To configure the

MorphoAccess™ terminal to manage the local database, this

default value must be changed to 0.

From the System Menu, press the CONFIG key to access the

configuration files.

(9) With MorphoAccess™ 300, the stand alone mode is disabled. Nevertheless, the key value must be set to 0

to enable MMS connection.

PREV NEXT EDIT

EXIT

FILE: cfg/Maccess

SECTION: Admin

PwdAdmin : 12345

manuel.book Page 41 Vendredi, 30. mai 2003 12:21 12

42 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

Press NEXT key until the file shows "/cfg/Maccess". Press the

EDIT key to select "Admin" section.

Press EDIT key and NEXT key to select the "Host Com" value.

You can now edit the value. The LEFT and RIGHT keys move the

cursor. The numeric keys enter digits as necessary. The

alphanumeric # key deletes the digit immediately to the left of the

cursor. The EXIT key aborts editing and restores the previous

value.

The allowed values are:

You cannot use the stand alone mode to manage your local

database if the MorphoAccess™ biometric data is managed by the

MMS.

The MorphoAccess™ shall be used either in stand alone mode or

in connected mode (with MMS) but never in both modes.

Parameters Value Comment

Host Com 0 Stand alone

1 Connected through COM1

2 Connected through COM2

3 (default value) Connected through ETH-

ERNET

PREV NEXT EDIT

EXIT

FILE: cfg/Maccess

SECTION: Admin

PREV NEXT EDITEXIT

FILE: cfg/Maccess

SECTION: Admin

Host Com : 1

manuel.book Page 42 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 43

Configuring the key to 0 will disable MMS connection.

Setting up juvenile recognition

Since software release 2.0, the MorphoAccess™ is able to

manage both juvenile and adult finger images.

From the System Menu, press the CONFIG key to access the

configuration files. Press the NEXT key until the file menu shows

"/cfg/ Maccess".

Press the EDIT key. Press the NEXT key until the section menu

shows "bio".

Press the EDIT key. You can edit the juvenile parameters to

activate juvenile recognition.

PREV NEXT EDIT

EXIT

FILE: cfg/Maccess

SECTION:

PREV NEXT EDIT

EXIT

FILE: cfg/Maccess

SECTION: bio

PREV NEXT EDIT

EXIT

FILE: cfg/Maccess

SECTION: bio

juvenile : 0

manuel.book Page 43 Vendredi, 30. mai 2003 12:21 12

44 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

This provides a solution with reliable performance to the automatic

processing of finger images with small to normal ridges, extending

the capability of the terminal by providing access control to a wider

range of population.

Since the encoding time is a little bit longer when the juvenile

option is turned on, we offer the possibility to the user set up the

terminal either in "Juvenile" mode or in standard mode.

When the juvenile mode is turned on, key set to 1, young children

can easily be enrolled in the MorphoAccess™.

Setting up anti-latency

The anti-latency processing consists to detect marks left on the

sensor. In some extreme conditions it is possible that a mark left

on the sensor triggers an identification or verification.

From the 4.4 release of MorphoAccess firmware it is now possible

to detect marks left on the sensor.

When the MorphoAccess detects a mark the identification is

stopped and the application loops back and look for a new

fingerprint.

With regards to the previous releases of the MA application the

main change is that a fingerprint placed two consecutive times on

the sensor in the the same position will be rejected from the

second attempt.

From the System Menu, press the CONFIG key to access the

configuration files. Press the NEXT key until the file menu shows

"/cfg/Maccess".

PREV NEXT EDIT

EXIT

FILE: cfg/Maccess

SECTION:

manuel.book Page 44 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 45

Press the EDIT key. Press the NEXT key until the section menu

shows "bio".

Press the EDIT key. You can edit the anti-latency parameters to

activate the mode.

When the anti-latency mode is turned on, key set to 1, no latent

fingerprint marks may be detected by the MorphoAccess™.

Setting up matching threshold

The performances of a biometric system are characterized by two

quantities, the False Non Match Rate - FNMR - (Also called Fale

Reject Rate) and the False Match Rate - FMR - (Also called False

Acceptance Rate). Different trade-off are possible between FNMR

and FMR depending on the security level targeted by the access

control system. When convenience is the most important factor the

FNMR must be low and conversly if security is more important

then the FMR has to be minimized.

Different tunning are proposed in the MorphoAccess terminal

depending on the security level targeted by the system. The table

below details the different possibilities.

From the System Menu, press the CONFIG key to access the

configuration files. Press the NEXT key until the file menu shows

"/cfg/ bio".

PREV NEXT EDIT

EXIT

FILE: cfg/Maccess

SECTION: bio

PREV NEXT EDIT

EXIT

FILE: cfg/Maccess

SECTION: bio

Anti latency : 0

manuel.book Page 45 Vendredi, 30. mai 2003 12:21 12

46 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

Press the EDIT key. Press the NEXT key until the section menu

shows "matching threshold".

Press the EDIT key. You can edit the matching threshold level

parameters for identification and authentication using NEXT and

EDIT keys.

PREV NEXT EDIT

EXIT

FILE: cfg/bio

SECTION:

PREV NEXT EDITEXIT

FILE: cfg/bio

SECTION: matching thresh

PREV NEXT EDITEXIT

FILE: cfg/bio

SECTION: matching threshold

identify : 5

PREV NEXT EDIT

EXIT

FILE: cfg/bio

SECTION: matching threshold

authenticate : 5

manuel.book Page 46 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 47

You can now edit the format of the value. The LEFT and RIGHT

keys move the cursor. The numeric keys enter digits as necessary.

The alphanumeric # key deletes the digit immediately to the left of

the cursor. The EXIT key aborts editing and restores the previous

value.

This parameter can be set to values from 0 to 10. This parameter

specifies how tight the matching threshold is. Threshold scoring

values are identified below.

For example:

0 Low threshold for test purpose

only

There are few rejections, but

many recognitions

1 Very few persons rejected FAR < 1%

2 FAR < 0.3%

3 FAR < 0.1%

4 FAR < 0.03%

5 Intermediate threshold

(default value)

FAR < 0.01%

6 FAR < 0.001%

7 FAR < 0.0001%

8 FAR < 0.00001%

9 Very high threshold

(few false acceptances)

FAR < 0.0000001%

10 High threshold for test purpose

only

There are very few recogni-

tions, and many rejections

manuel.book Page 47 Vendredi, 30. mai 2003 12:21 12

48 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

Setting up multilingual application

The MorphoAccess™ can operate using other language than

English. It can also operate in Spanish and French. It is possible to

download a user defined string table. For more information about

this feature, refer to the MorphoAccess™ Host System Interface

Specification, Ref.: 3000005996.

The default language of the MorphoAccess™ is defined in the

/cfg/Maccess/Language/default.

The allowed values are:

Setting up user interface

Language

A user may choose his language by pressing a button. The

language choice is circular. This feature can be enabled and

disabled with key /cfg/Maccess/Language/change.

Those configuration keys can be defined from the CONFIG menu

in file /cfg/Maccess, in section Language.

Parameters Value Comment

Default 0 (default value) English

1 Spanish

2 French

3 User defined language

Place your finger

for identification

Please

manuel.book Page 48 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 49

Identification information

On a positive identification, it is possible to display an information

about the identified user. This information should be present in the

additional fields of its record.

Those configuration keys can be defined from the CONFIG menu

in file /cfg/Maccess, in section GVI.

The allowed values are:

Example: First and second additional field have been selected.

They contain first and family name of all records present in the

database. On identification, system will display the following

screen:

This feature needs a database containing the appropriate

additional fields.

Parameters Value Comment

Change 0 (default value) The change language but-

ton is disable. Users can-

not change their language.

1 Users can choose their

language using the change

language button.

Parameters Value Comment

Welcome field 1/2 0 (default value) System displays ID of iden-

tified person.

X System displays data

present in additional field

number X of identified per-

son.

Welcome

John SMITH

IDENTIFIED

✔✔

✔

manuel.book Page 49 Vendredi, 30. mai 2003 12:21 12

50 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

Clock

When using time mask feature, users may find useful to

synchronise with their MorphoAccess™. A clock can be displayed.

Time is displayed in the 24 hours format.

Related configuration key can be defined from the CONFIG menu

in file /cfg/GUI, in section Display hour.

The allowed values are:

Idle mode

In identification mode it is possible to switch the MorphoAccess™

in idle mode in order to shut down sensor red light and green

screen back light. Pressing a key wakes the MorphoAccess™ up.

Related configuration key can be defined from the CONFIG menu

in file /cfg/GUI, in section Idle time in min.

The allowed values are:

Parameters Value Comment

Display hour 0 (default value) Clock is not displayed.

1 Clock is displayed and

refreshes every minute.

Parameters Value Comment

Idle time in min. 0 (default value) MorphoAccessTM never

enters idle mode.

n MorphoAccessTM enters

idle mode after n minutes.

Place your finger

for identification

Please

15:24

manuel.book Page 50 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 51

Setting up contactless reader parameters (MorphoAccess™

220 only)

A MIFARE card is defined by a unique serial number. The card is

divided in 16 sectors. Each sector is divided in 4 blocks. Each

block contains 16 bytes of data. Data are encoded with two sets of

key. To be able to read a card, the reader should use the same key

set. Fourth blocks cannot be read, they are used to store key sets.

Data can be accessed by blocks as follows:

Blocks are numbered in an absolute way, 1 for block 0 sector 0,

then 3 blocks for each sector.

SAGEM SA biometric data (ID, name and templates) are located

on the card thanks to a BNC address where:

<B> is the first block number to read,

<N> is the number of blocks to read,

<C> selects a security key.

For more information about SAGEM SA biometric data, please

contact SAGEM SA or refer to document 3000005996

MorphoAccess™ Host System Interface Specification.

With a MorphoAccess™ 220, contactless parameters can be

defined from the CONFIG menu in file /cfg/Maccess, in section

Contactless.

Block 0 Block 1 Block 2 Block 3

Sector 0 Block 1 Block 2 Block 3

Sector 1 Block 4 Block 5 Block 6

...

Sector 15 Block 46 Block 47 Block 48

manuel.book Page 51 Vendredi, 30. mai 2003 12:21 12

52 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

The allowed values are:

Setting up log file

The MorphoAccess™ can log its biometric activities. It stores the

result of the command, the date and time, the matching mark, the

execution time, and the ID of the user.

Those configuration keys can be defined from the CONFIG menu

in file /cfg/Maccess, in section Admin.

Parameters Value Comment

Reader Type 0 No MIFARE reader is

used.

1 External MIFARE Deister

reader is used.

2 (default value) Internal MIFARE reader is

used.

B 4 (default value) to

First block number to read.

N 2 or 25 Number of blocks to read.

2 when an ID is stored.

25 when templates are

stored.

C 2 (default value) MIFARE security key A is

selected.

MIFARE security key B is

selected.

manuel.book Page 52 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 53

The allowed values are:

It is possible to upload the log file. For more information about this

feature, refer to the MorphoAccess™ Host System Interface

Specification, Ref.: 3000005996.

Setting up time mask

When using MMS commands, a time mask feature is available.

This mode enables the access according to its time mask. Time

mask is defined by slots of 15 minutes over a week. For more

information, see MorphoAccess™ Host System Interface

Specification Ref.: 3000005996.

Those configuration keys can be defined from the CONFIG menu

in file /cfg/Maccess, in section Admin.

The allowed values are:

Parameters Value Comment

Log File 0 (default value) MorphoAccessTM is not

logging its activities.

1 MorphoAccessTM is log-

ging its activities.

Parameters Value Comment

Time mask 0 (default value) Time mask feature is dis-

able.

1 Time mask feature is

enabled. Users must be on

time to have their access

granted.

manuel.book Page 53 Vendredi, 30. mai 2003 12:21 12

54 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

Setting up download agent

In order to upgrade the MorphoAccess™ terminal to future

versions, a download agent is running. This agent allows

connecting to the terminal and proceeding maintenance

operations. For more information about the protocol used to

communicate with this agent, please contact your SAGEM SA

sales representative.

Those configuration keys can be defined from the CONFIG menu

in file /cfg/sdl, in section download.

The allowed values are:

Setting up Wiegand/Dataclock ouput

You can use the output Wiegand(10) or Dataclock to send the

corresponding ID to the central security controller. Wiegand ports

are configured in 26-bit format and output port Dataclock is

compatible with ISO track 2 data formats.

Using Wiegand, ID is sent in binary format. Using Dataclock, Id is

sent in BCD(11) format(12).

From the System Menu, press the CONFIG key to access the

configuration files. Press the NEXT key until the file menu shows

"/cfg/Maccess".

Parameters Value Comment

Active 0 Agent is disabled.

1 (default value) Agent is enabled.

Ratif 3 (default value) Number of failed attempts

before deactivating the

agent.

Password 12345678

(default value)

Password to present in

order to connect the agent.

(10)Refer to the previous chapter to configure the terminal with desired output.

(11)BCD: Binary Code Decimal.

(12)For more information, see appendices 2 and 3.

manuel.book Page 54 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 55

Press the EDIT key. Press the NEXT key until the section menu

shows "Wiegand/Dataclock".

Press the EDIT key. You can edit the Wiegand/Dataclock

parameters using NEXT and EDIT keys.

To configure the facility code in Wiegand(13) mode, you must select

the facility code key in section Wiegand/Dataclock.

You can now edit the value. The LEFT and RIGHT keys move the

cursor.The numeric keys enter digits as necessary. The

alphanumeric # key deletes the digit immediately to the left of the

cursor. The EXIT key aborts editing and restores the previous

value.

To configure the Data and Strobe levels in Dataclock(14) mode,

you must select the Dataclock level key in section

Wiegand/Dataclock.

(13)For more information, see appendix 2

(14)Idem.

PREV NEXT EDIT

EXIT

FILE: cfg/Maccess

SECTION:

PREV NEXT EDIT

EXIT

FILE: cfg/Maccess

SECTION: Wiegand/Dataclock

PREV NEXT EDITEXIT

FILE: cfg/Maccess

SECTION: Wiegand/Dataclock

Facility code : 7

manuel.book Page 55 Vendredi, 30. mai 2003 12:21 12

56 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

You can now edit the value. The LEFT and RIGHT keys move the

cursor.

The numeric keys enter digits as necessary. The alphanumeric #

key deletes the digit immediately to the left of the cursor. The EXIT

key aborts editing and restores the previous value.

When finished editing, press OK key to update the format value

and return to the previous screen.

To activate/deactivate the output port, you must select the SEND

key in section Wiegand/Dataclock.

You can now edit the value. The LEFT and RIGHT keys move the

cursor.

The numeric keys enter digits as necessary. The alphanumeric #

key deletes the digit immediately to the left of the cursor. The EXIT

key aborts editing and restores the previous value.

Parameters Value Comment

Dataclock level 0 (default value) Data and strobe are not

inverted.

1 Strobe is inverted.

2 Data is inverted.

3 Data and strobe are

inverted.

PREV NEXT EDIT

EXIT

FILE: cfg/Maccess

SECTION: Wiegand/Dataclock

Dataclock level : 0

PREV NEXT EDITEXIT

FILE: cfg/Maccess

SECTION: Wiegand/Dataclock

Send : 0

manuel.book Page 56 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 57

The allowed values are:

When finished editing, press OK key to update the value and

return to the previous screen.

To configure the behaviour of LED IN and LED OUT signals, go to

the CONFIG menu in file /cfg/Maccess, in section

Wiegand/Dataclock.

You can now edit the value. The LEFT and RIGHT keys move the

cursor.

The numeric keys enter digits as necessary. The alphanumeric #

key deletes the digit immediately to the left of the cursor. The EXIT

key aborts editing and restores the previous value.

The allowed values are:

Parameters Value Comment

Send 0 The output is not activated.

1 (default value) The output is activated.

Parameters Value Comment

Level out/Card present 0 (default value) Autodetect

The led out signal can

behave as a card present

signal depending on the

hardware configuration of

the system:

−DataClock IN/

DataClock OUT: Card

present

PREV NEXT EDIT

EXIT

FILE: cfg/Maccess

SECTION: Wiegand/Dataclock

led out/card present : 0

manuel.book Page 57 Vendredi, 30. mai 2003 12:21 12

58 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

Setting up Ethernet Link parameters

You can use the Ethernet port to send the corresponding ID to the

central security controller. Connection should be made using port

11020.

Those configuration keys can be defined from the CONFIG menu

in file /cfg/Maccess, in section Ethernet.

Parameters Value Comment

−Wiegand IN/

DataClock OUT: card

present (priority goes to

dataclock out)

−Wiegand IN/

Wiegand OUT: led out

−DataClock IN/

Wiegand OUT: inactive

Led out/Card present

(con’t)

1 Force Led out

The led out signal only

behaves as a led out sig-

nal.

Led in 0 (default value) Active

The led in signal is

ignored.

1 Inactive

The MorphoAccessTM led

is driven by the led in sig-

nal:

led in = 0 =>led is green

led in = 1 => led is off

manuel.book Page 58 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 59

The allowed values are:

Setting up Serial Link Parameters

You can use the serial port(15) to send the corresponding ID to the

central security controller. You can use COM1 or COM2 or both.

Setting up COM1 port

From the System Menu, press the CONFIG key to access the

configuration files. Press the NEXT key until the file menu shows

"/cfg/ Maccess".

Press the EDIT key. Press the NEXT key until the COM1 menu

shows "COM1".

Parameters Value Comment

Send 0 (default value) ID is not sent.

1 ID is sent through the Eth-

ernet port.

IP aaa.bbb.ccc.ddd IP of the central security

controller.

(15)One RS422 port (full duplex, four wires) or one RS232 port.

PREV NEXT EDIT

EXIT

FILE: cfg/Maccess

manuel.book Page 59 Vendredi, 30. mai 2003 12:21 12

60 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

Press the EDIT key. You can now edit the format parameters to

select the output format of the ID.

You can now edit the format of the ID. The LEFT and RIGHT keys

move the cursor. The numeric keys enter digits as necessary. The

alphanumeric # key deletes the digit immediately to the left of the

cursor.

The EXIT key aborts editing and restores the previous value.

The allowed values are:

When finished editing, press OK key to update the format of the ID

and return to the previous screen.

Parameters Value Comment

Format 0 (default value) The ID is sent in ASCII for-

mat.

1 The ID is sent in Hexa for-

mat.

2 The ID is sent in BCD(13)

format.

PREV NEXT EDIT

EXIT

FILE: cfg/Maccess

SECTION: COM1

PREV NEXT EDITEXIT

FILE: cfg/Maccess

SECTION: COM1

Format : 0

manuel.book Page 60 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 61

To activate or deactivate the COM1 port, you must select the

SEND key in section COM1.

The allowed values are:

ID transmission on port COM1 is disabled when ILV

communication is activated with key /cfg/Maccess/Admin/Host

Com set to 1.

To configure the COM1 serial link, press the CONFIG key from the

System Menu. Press the NEXT key until the file menu shows "/cfg/

ser0" and select parameters section.

Parameters Value Comment

Send 0 (default value) The COM1 output is not

activated.

1 The output COM1 is acti-

vated.

LEFT RIGHT OK

CANCEL

/cfg/Maccess/COM1

Send

PREV NEXT EDIT

EXIT

FILE: /cfg/ser0

manuel.book Page 61 Vendredi, 30. mai 2003 12:21 12

62 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

Press the EDIT key. The section menu will show "parameters".

Press the EDIT key. You can edit the baudrate value to select the

transmission speed.

You can now modify the baudrate value of COM1 port. The LEFT

and RIGHT keys move the cursor. The numeric keys enter digits as

necessary. The alphanumeric # key deletes the digit immediately

to the left of the cursor. The EXIT key aborts editing and restores

the previous baudrate value.

Parameters Value Comment

Baudrate (bits/second) 0 1200

1 2400

2 4800

3 (default value) 9600

4 19200

5 28800

6 38400

7 57600

8 115200

PREV NEXT EDIT

EXIT

FILE: cfg/ser0

SECTION: parameters

PREV NEXT EDIT

EXIT

FILE: cfg/ser0

SECTION: parameters

baudrate : 3

manuel.book Page 62 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 63

When finished editing, press OK key to update the baudrate field

and return to the previous screen.

To configure the next parameters (databits, parity and control flow),

select the NEXT key to select the other value and follow the

previous descriptions to modify the values.

You can edit the databits parameters. The different values are:

Parameters Value Comment

Databits 5 5

7 (default value) 7

PREV NEXT EDIT

EXIT

FILE: cfg/ser0

SECTION: parameters

databits : 7

PREV NEXT EDIT

EXIT

FILE: cfg/ser0

SECTION: parameters

stopbits : 2

manuel.book Page 63 Vendredi, 30. mai 2003 12:21 12

64 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

You can edit the stopbits parameter, the allowed values are:

You can edit the parity parameter.

The allowed values are:

You can edit the control flow parameter.

The allowed values are:

Parameters Value Comment

Stopbits 1 1

2 (default value) 2

Parameters Value Comment

Parity 0 No

1Odd

2 (default value) Even

Parameters Value Comment

Flow Ctrl Type 0 (default value) No

2 Xon/Xoff

PREV NEXT EDIT

EXIT

FILE: cfg/ser0

SECTION: parameters

Parity : 2

PREV NEXT EDIT

EXIT

FILE: cfg/ser0

SECTION: parameters

flow ctrl : 0

manuel.book Page 64 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 65

When using the Deister contacless card reader, COM1 parameters

should be:

Setting up COM2 port

To activate this port, press the CONFIG key to access the

configuration files. Press the NEXT key until the file menu shows

"/cfg/Maccess". Press the EDIT key, and select the RS232 section.

The values are:

Baudrate

Databits

Stopbits

Parity

Flow ctrl

3 (9600)

Parameters Value Comment

Send 0 (default value) The RS232 output is not

activated.

1 The RS232 output is acti-

vated.

Format 0 (default value) The ID is sent in ASCII for-

mat.

1 The ID is sent in Hexa for-

mat.

2 The ID is sent is BCD(1)

format.

(1) BCD: Binary Code Decimal

PREV NEXT EDITEXIT

FILE: cfg/Maccess

SECTION: COM2

manuel.book Page 65 Vendredi, 30. mai 2003 12:21 12

66 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

The following table describes the parameters for the serial link

configuration. Press the CONFIG key to access the configuration

files. Press the NEXT key until the file menu shows "/cfg/ser1" and

select parameters section.

ID transmission on port COM2 is disabled when ILV

communication is activated with the key /cfg/Maccess/Admin/Host

Com set to 2.

The values are described below:

Parameters Value Comment

Baudrate 0 1200 bit/second

1 2400 bit/second

2 4800 bit/second

3 (default value) 9600 bit/second

4 19200 bit/second

5 28800 bit/second

6 38400 bit/second

7 57600 bit/second

8 115200 bit/second

Data bits 5 5

7 (default value) 7

Stop bits 1 1

PREV NEXT EDIT

EXIT

FILE: cfg/ser1

SECTION: parameters

manuel.book Page 66 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 67

Setting up Relay Parameters

It is possible to configure the release time of the relay. For this,

from the System Menu, press the CONFIG key to access the

configuration files. Press the NEXT key until the file menu shows

"/cfg/Maccess".

Press the EDIT key, and press NEXT key to select the Relay

section.

Press the EDIT key. You can edit the release time value by 100 ms

steps.

You can now modify the release time value by pressing the EDIT

key.

The LEFT and RIGHT keys move the cursor. The numeric keys

enter digits as necessary. The alphanumeric # key deletes the digit

immediately to the left of the cursor. The EXIT key aborts editing

and restores the previous value.

Parameters Value Comment

Parity 0 No

1Odd

2 (default value) Even

Flow control type 0 (default value)l No

1 Hardware (CTS/RTS)

2 Software (XON/XOFF)

PREV NEXT EDITEXIT

FILE: cfg/Maccess

SECTION: Relay

PREV NEXT EDIT

EXIT

FILE: cfg/Maccess

SECTION: Relay

Time in 100 ms : 30

manuel.book Page 67 Vendredi, 30. mai 2003 12:21 12

68 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

When finished editing, press the OK key to update the release

time field and return to the previous screen.

To configure the next parameter, select the NEXT key. You can edit

the "active" value.

The different values are:

Parameters Value Comment

Active 0 (default value) Relay not active.

2 Relay active.

PREV NEXT EDIT

EXIT

FILE: cfg/Maccess

SECTION: Relay

Active : 0

manuel.book Page 68 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 69

The VERSION menu

Information Display

From the System Menu, press the VERSION key to access the

information file.

This display contains information that may be necessary if the

SAGEM SA MorphoAccess™ requires technical support. It should

not normally be necessary to access this display unless requested

by SAGEM SA technical support personnel.

Kernel is the name of the module being displayed.

Rev is the revision of the module.

P/N is the part number for the module.

∑ is the checksum for the module.

The next line shows the date of the module’s creation.

ID is the ID for the module in the system.

The PREV and NEXT buttons allow you to browse for all modules

present in your SAGEM SA MorphoAccess™.

EXIT returns to main menu.

PREV NEXT EXIT

Kernel Rev: 3.1

P/N:233082036 ∑:0125B463

May 1 2002 13:21:05 ID:0001

manuel.book Page 69 Vendredi, 30. mai 2003 12:21 12

70 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

The SERIAL NUMBER menu

Serial Number Display

From the System Menu, press the SER NB key to display the

serial number.

Serial # is your SAGEM SA MorphoAccess™’s serial number.

MicroBoot revision is the revision number of your SAGEM SA

MorphoAccess™’s MicroBoot. This revision number may be

needed when requesting technical support.

ETH is the physical Ethernet address, also known as the MAC

address. This address may be required by your network

Administrator.

Serial # : 993000001

Micro Boot revision : 2.4

ETH : 00:90:27:9A:F2:53

manuel.book Page 70 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 71

The SETTING menu

Parameters Setting

From the System Menu, press the SETTING key to access the

parameter settings.

The CONTRA selection allows you to adjust the contrast of the

LCD display.

The MORE key increases the contrast, the LESS key decreases

the contrast.

The RTC menu allows you to set the current date and time.

GENERAL SETTINGS

CONTRA RTC EXIT

CONTRAST SETTINGS

LESS MORE EXIT

CONTRAST VALUE : 5

RTC SETTINGS

SETTIME SETDATE EXIT

Time 16:45:44 Date 14/06/00

manuel.book Page 71 Vendredi, 30. mai 2003 12:21 12

72 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

The SETTIME key allows you to set the time. Enter the time in the

following format: HHMMSS. The VALID key records your setting.

The CANCEL key aborts editing and returns to the previous menu.

The SETDATE key allows you to set the current date. Enter the

date in the following format: DDMMYY. The VALID key records

your setting.

The CANCEL key aborts editing and returns to the previous menu.

Note : You can use the correction key # to delete the last charac-

ters entered.

TIME SETTINGS

VALID CANCEL

TIME (HHMMSS) : 120000

DATE SETTINGS

VALID CANCEL

DATE (DDMMYY) : 100600

manuel.book Page 72 Vendredi, 30. mai 2003 12:21 12

SE32/03-011145-01 SAGEM SA document. Reproduction and disclosure forbidden. 73

Access the MIFARE keys update menu

(MorphoAccessTM 220)

Each data sector on a MIFARE card is protected in reading and

writing by 2 keys of 6 bytes each. These keys are noted A and B.

Since the card is composed of 16 sectors, there are actually 32

keys.

When you present a MIFARE card to the MorphoAccess for an

authentication, data can be read only if the keys which protect it

are the same as the keys initialized into the reader. By default both

keys A and B are set to 0xFFFFFF for the 16 sectors in the

MIFARE module of the MorphoAccess. These default values are

called Transport keys.

You can change the value of the keys thanks to the hotkey

CL KEYS in the Administrator menu(16). You will need for that an

administrator card containing the new keys to initialize. Please

check the Enrollment Station documentation to know how to create

an administrator card.

While you are in the administrator menu, press the key CL KEYS.

The MIFARE KEYS UPDATE screen appears.

Present the administrator card to start the update.

(16)If you perform this operation, the old user cards won't be readable anymore, since the keys won't be com-

pliant anymore.

CANCEL

MIFARE KEYS UPDATE

Please Present Admin Card

manuel.book Page 73 Vendredi, 30. mai 2003 12:21 12

74 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

When the MorphoAccess™ finishes to update the keys for the

16 sectors, a successful message appears. The keys status

indicates now "user" keys, meaning keys different from 0xFFFFFF

have been loaded into the reader. Then the MorphoAccess™

comes back to the administrator menu after 2 seconds.

If for some reasons the update is not successful (power shutdown

before the end of the operation for instance), a new hotkey will be

available the next time you will enter in the CL KEYS menu. The

keys status will indicate "INVALID" keys.

Pressing the LOAD DFLT KEYS hotkey will allow you to re-update

the 32 keys with the default value 0xFFFFFF.

CANCEL

MIFARE KEYS UPDATE

Updating Key A3 & B3

CANCEL

MIFARE KEYS UPDATE

Keys have been udpated !

MIFARE KEYS UPDATE

Please Present Admin Card

LOAD DFLT KEYS

manuel.book Page 74 Vendredi, 30. mai 2003 12:21 12

44 75

Communication protocol

The communication protocol available allows the terminal to

send commands to a host through the communication

COM1/RS485.

All the commands will be formatted with an "Identier Length

Value" structure as described below:

Identier Length Value

Identier called I This is the identier of the command.

Length called L This is the length of the Value eld in bytes.

Value called V The parameters or data.

The commands will be encapsulated in a packet structure

described on the next gure.

STX ID RC ILV CRC DLE ETX

CRC : Compliance CRC16 V41

Fields name Denition Value

<STX> Start Text 0x02

<ID> Packet Identier 0xE1

<RC> Request Counter Unused byte

<ILV> Identier Length

Data (DLE data

bytes arestuffed)

0x00 for ASCII

0x01 for Hexa

0x02 for BCD

L: 2 bytes

V: Value of identier

<CRC> Transmission error

control

Depends on the

frame

<DLE> 0x1B

<ETX> End Text 0x03

Communication protocol

Appendix 1 - Wiegand data format

The 26 bits of transmission consists of two parity bits and 24

code bits. The eight rst code bits are encoding the facility code.

This code identies each Morphoccess in a network. The 16

other bits are data bits. The rst bit transmitted is the rst parity

bit. It is even parity calculated over the rst 12 bits. The last bit

transmitted is the second parity bit. It is odd parity bit calculated

over the last 12 code bits.

Even parity (1 bit) Facility code (8

bits)

Data (16 bits) Odd parity (1 bit)

Compliant with access control 26-Bit - Wiegand reader interface

standard 03/1995.

Appendix 1

46 77

Appendix 2 - ISO 7811/2-1995 - Track 2 Data clock format

Compliant with ISO07811/2-1995 - Track 2.

Data encoding table

Value Bit pattern Meaning

0 0 0 0 0-1 "0"

1 1 0 0 0-0 "1"

2 0 1 0 0-0 "2"

3 1 1 0 0-1 "3"

4 0 0 1 0-0 "4"

5 1 0 1 0-1 "5"

6 0 1 1 0-1 "6"

7 1 1 1 0-0 "7"

8 0 0 0 1-0 "8"

9 1 0 0 1-1 "9"

10 (Ahex) 0 1 0 1-1 unused character

11 (Bhex) 1 1 0 1-0 start sentinel (start character)

12 (Chex) 0 0 1 1-1 unused character

13 (Dhex) 1 0 1 1-0 eld separator

14 (Ehex) 0 1 1 1-0 unused character

15 (Fhex) 1 1 1 1-1 end sentinel (stop character)

The least signicant bit of every digit is sent rst; the fth bit is

an odd parity bit for each group of four data bits.

The complete message always looks as follows:

left

edge

start data

characters

end LRC right

edge

The LRC is calculated by the following procedure: each of the

4 bits in the LRC character is an even parity bit of the equivalent

bits in the telegram including start and stop sentinel.

The fth bit is the odd parity of the four LRC bits (it is not

calculated over all the parity bits).

Appendix 2

Data clock levels

In normal operation mode (default) in and out signals are dened

as:

data

strobe

Other modes are (only for output):

data

inverted strobe

inverted data

strobe

inverted data

inverted strobe

Appendix 2

48 79Appendix 3

Appendix 3 - Reserved conguration values

These values are for internal use only.

For proper operation, these settings should not be changed.

/cfg/lcd0/display/type : 1

/cfg/lcd0/contrast/value : 0

/cfg/ser0/mode/connection: EXT

/cfg/ser0/mode/mode: 450

db/seq ash/start: 0

/cfg/bio/video/channel: 0

/cfg/bio/video/rotation: 0

/cfg/lic/licences/*