Sagem Wireless MX08S3 GSM/EDGE/WCDMA Mobile Phone with BT User Manual User guide Roxy FCC agreement

Download:
Mirror Download [FCC.gov]
Document ID	1004972
Application ID	9ECDHYgptE9+kOcoMBfiew==
Document Description	User Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	193.53kB (2419066 bits)
Date Submitted	2008-09-23 00:00:00
Date Available	2008-09-23 00:00:00
Creation Date	2008-08-26 15:11:56
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2008-08-26 15:18:20
Document Title	User guide Roxy FCC_agreement.book
Document Creator	FrameMaker 7.0
Document Author:	g070208

User guide Roxy FCC_agreement.book Page 1 Mardi, 26. août 2008 3:19 15
English
User guide Roxy FCC_agreement.book Page 2 Mardi, 26. août 2008 3:19 15
You have just purchased a Roxy phone, we congratulate you; it is recommended that you read this handbook carefully in
order to use your phone efficiently and in the best conditions.
Your phone can be used internationally in the various networks (3G 2100 MHz (UMTS/HSDPA), GSM 900 MHz,
DCS 1800 MHz and PCS 1900 MHz) depending on the roaming arrangements with your operator.
This phone is approved to meet European standards.
WARNING
Depending on the model, network configuration and associated subscription cards, certain functions may not be available.
Roxy is a trademark of QUICKSILVER group.
T9® Text Input is a trademark of ©Tegic Communications Inc.
Java™ and all Java™ based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the
U.S. and other countries.
The WAP browser and the softwares included are the exclusive property of Openwave. For this reason, it is forbidden to
modify, translate, disassemble or even decompile all or part of these softwares.
Wellphone™ and SmartCom™ are registered trademarks owned by SmartCom SARL France.
The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. Bluetooth® QDID (Qualified Design ID):
B014080.
microSD™ is a trademark of SD Card Association.
User guide Roxy FCC_agreement.book Page 3 Mardi, 26. août 2008 3:19 15
Contents
Description .................................................. 5
Idle screen ......................................................7
Quick start ................................................... 8
Information on the SIM card............................8
Installing the SIM card and the battery ...........9
Charging the battery .....................................10
Improving antenna performance ...................11
Increase the battery life of your phone..........11
Inserting the memory card ............................11
Removing the memory card..........................12
Getting started ..............................................12
Switching ON/OFF ........................................13
Network.........................................................13
Calls............................................................ 14
Calling ...........................................................14
Receiving a call.............................................14
Video call ......................................................15
Call history ....................................................15
Call settings ..................................................16
Contacts..................................................... 18
Using the phonebook ....................................18
Storing a new contact ...................................18
Contact options .............................................18
Messaging.................................................. 22
Creating a text message or an e-mail ...........22
Saving the message without sending it.........23
Sending the message ...................................23
Receiving messages.....................................24
Creating and sending a voice message........24
Contents
Messaging menu .......................................... 24
Multimedia functions ................................ 26
Music player ................................................. 26
FM Radio ...................................................... 28
Photo and video............................................ 29
Multimedia .................................................... 30
Entertainment/My Games ............................. 31
My Applications ............................................ 31
Connection functions ............................... 32
Browser ........................................................ 32
Connectivity .................................................. 33
Phone customization ................................ 36
Profiles setting .............................................. 36
Ringtones ..................................................... 36
Date and Time .............................................. 36
Keypad lock .................................................. 36
Languages .................................................... 37
Security......................................................... 37
Photo, video and dictaphone settings........... 38
Storage location............................................ 38
Memory......................................................... 39
This menu displays the memory space used for
the various functions..................................... 39
Display .......................................................... 39
Other functions ......................................... 40
Calendar ....................................................... 40
ToDo ............................................................. 41
Clock............................................................. 41
Synchronization ............................................ 41
User guide Roxy FCC_agreement.book Page 4 Mardi, 26. août 2008 3:19 15
Calculator and converter............................... 42
Torch lamp.................................................... 42
Local information .......................................... 42
Services ........................................................ 42
Dictaphone.................................................... 42
Help .............................................................. 43
Technical features..................................... 44
Certification and safety information for the
United States and countries using FCC
standards ................................................... 45
FCC Part 15 statement ................................. 45
FCC SAR information ................................... 46
Safety Information......................................... 47
Distance of operation.................................... 48
FDA consumer information on wireless phones
48
Driving safety tips ......................................... 51
Certification and safety information for
Europe and countries using CE standards
52
CE Declaration of Conformity ....................... 52
CE SAR information...................................... 53
Safety............................................................ 54
Environment.................................................. 55
End User Licence Agreement (EULA), for
the software ............................................... 56
Java™......................................................... 60
Warranty..................................................... 63
Troubleshooting ........................................ 66
Customer care ........................................... 68
Index ........................................................... 69
Contents
User guide Roxy FCC_agreement.book Page 5 Mardi, 26. août 2008 3:19 15
Description
Light
indicator
messages)
(missed
calls,
Lens for shooting in video call or photo
and video
Left key
- In idle screen: access to the main
menus
- In menus: access to the selection
shown on screen in the tab
Green key
- Activate/deactivate hands-free mode
(long press).
WARNING: do not use the phone in
hands-free mode near to your ear, or
you may suffer hearing loss.
- In call context: call - receiving a call
- In idle screen: displaying the call log.
Microphone
WARNING: Ensure that you are not
obstructing the microphone in call
context
* key
When composing a message:
- Long press: switches from one input
mode to another (ABC/T9)
- Short press: upper case/lower
case/figures
Description
Right key
- In idle screen: access to the camera
- In menus: access to the selection
shown on screen in the tab
Red key
- Short press: switch on
- Long press: switch off
- In a call context: reject a call - hang up
- In menus: Return to idle screen
Navigator
- Navigation in menus
- Confirmation of a selection
# key
- In idle screen: silent mode (long press)
- In call reception mode: stops ring tone
(short press)
- In
ring
tone
setting
mode:
activate/deactivate ring tone (short
press).
- Stops sound in video or message playing,
or in a game (short press)
User guide Roxy FCC_agreement.book Page 6 Mardi, 26. août 2008 3:19 15
Flash
Access to Music Player
and FM radio
Lens for shooting in
video call or photo and
video
Loudspeaker
- Adjusting the volume
(ringtones, music)
- In the idle screen:
access to the Profiles
menu (short press)
- Setting zoom (photo,
video)
Description
User guide Roxy FCC_agreement.book Page 7 Mardi, 26. août 2008 3:19 15
Idle screen
The idle screen may contain the following information:
1 - The title bar icons:
Battery (if it flashes, the battery must be charged immediately)
Silent mode (the ringtone is off)
Only emergency call is possible
Reception level of the network signal
Message received (read your message), red: memory full (delete some messages)
GPRS connection
EDGE connection
WEB connection
Connection to the 3G network (UMTS)
Connection to the 3G network (HSDPA)
2 - Date and time, in digital or analog mode
3 - Network provider
The following information may also be displayed: "New message from n°" or "1 missed call".
It can be deleted by pressing the
key briefly.
Description
User guide Roxy FCC_agreement.book Page 8 Mardi, 26. août 2008 3:19 15
Quick start
Information on the SIM card
To use your phone, you need a card called SIM or USIM card. It contains
personal information that you can modify:
- Secret codes (PIN(s): Personal Identification Numbers), these codes allow
you to protect access to your SIM card and phone
- Phonebook
- Messages
- How special services work.
WARNING
This card must be handled and stored with care in order not to be damaged. If you should lose your SIM card, contact
your network provider immediately.
Please keep your SIM card out of reach of young children.
WARNING
Your phone is identified by its IMEI number. Write this number down, and do not keep it with your phone, because you
may be asked for it in the event of your phone being stolen, in order to prevent it from being used, even with a different
SIM card. In order to display the IMEI on your phone's screen, type: *#06#.
Quick start
User guide Roxy FCC_agreement.book Page 9 Mardi, 26. août 2008 3:19 15
Installing the SIM card and the battery
Ensure that the phone is switched off and the charger disconnected.
1 Turn the phone back. Use the notch as a lever to lift the cover.
2 Slide the SIM card, with cut corner as shown on the phone, into the card holder with gold face down.
3 Place the battery by positioning first the top of it.
4 Place the back cover, clicking in first the upper part then the lower part.
Quick start
User guide Roxy FCC_agreement.book Page 10 Mardi, 26. août 2008 3:19 15
Charging the battery
Your phone is powered by a rechargeable battery. A new battery must be
charged for 4 hours at least before being used for the first time. It reaches its
optimum capacity after a few cycles of use.
When your battery has been discharged, the empty battery icon flashes. In this
case recharge your battery for at least 15 minutes before making any calls in
order not to be cut off quickly.
Note: Each phone has a specific charger with the appropriate connectors for the
phone with which it is sold. Using any other charger, or using the charger with any
device other than the phone will lead to an exclusion of warranty.
To recharge the battery:
Connect the charger to a socket.
Plug the end of the cable on the side connector of the phone.
The phone is then charging up. The battery icon scrolls up and down to indicate that it is charging. When the battery is fully
charged, the charging stops on its own. Disconnect the cable.
When charging, the battery may warm up, this is normal.
When you charge the battery, the socket on which the charger is plugged must be easily accessible.
WARNING
If the battery has entirely discharged, the phone cannot start. Plug the phone to the charger. The phone will switch on
after a few minutes of charge. You can use the phone again when the Start option is displayed on the screen.
WARNING
There is danger of explosion if the battery is placed in an incorrectly way or if it is exposed to fire.
Do not short circuit it.
The battery does not have any part that you can change.
Do not try to open the battery casing.
Use only the appropriate chargers and batteries as shown in the phone manufacturer's catalogue.
The use of other types of chargers or batteries may be dangerous or invalidate the warranty.
Used batteries must be disposed of in the appropriate places.
We advise you to take the battery out if you plan not to use the phone for extended periods.
You are strongly advised not to connect your phone to the charger if it doesn’t contain a battery.
The charger is a safety step-down transformer, it is forbidden to modify, alter or replace it by another component (power
supply plug, etc).
10
Quick start
User guide Roxy FCC_agreement.book Page 11 Mardi, 26. août 2008 3:19 15
Improving antenna performance
The antenna is integrated in your phone, under the back cover at the bottom.
Avoid putting your fingers on this area when the phone is switched ON.
If your fingers obstruct the antenna, the phone may have to operate with a higher power level
than usual; decreasing its efficiency quickly. It could also affect the quality of your
communications.
Increase the battery life of your phone
- Don't press the keys when not necessary: each keypress activates the backlight, and uses much power.
- Don't obstruct the antenna with your fingers.
- Activation of Bluetooth® function reduces the phone battery life. We advise you to deactivate it when not in use.
Inserting the memory card
- Turn the phone back and remove the back cover.
- Insert the memory card into the slot, halfway up as shown on
the figure opposite (with gold face down).
Quick start
11
User guide Roxy FCC_agreement.book Page 12 Mardi, 26. août 2008 3:19 15
Removing the memory card
- Remove the back cover.
- Slide the memory card to extract it from its location.
- Turn your phone and shake it slightly to drop the memory card and retrieve it.
WARNING
The memory card is very fragile. Take care when you insert or remove the memory card.
The memory card can be inserted or withdrawn while the phone is in use. However, it may suffer damage if withdrawn
during a read or write operation. Ensure that no application accesses the card during its withdrawal.
Getting started
When you switch on your phone for the first time, follow instructions displayed on the screen.
If access to the SIM card is protected, the device prompts you to enter the PIN number:
Enter the code between 4 and 8 digits given to you when the SIM card was issued. These digits do not appear on the screen
for security reasons.
After pressing [OK], the phone activates the SIM card settings and switches on again if necessary (depending on the SIM
card).
If there are contacts saved in your SIM card, you are invited, if you wish, to copy them in the phone contacts memory.
Warning
If a wrong PIN number is entered three times in succession, your SIM card is blocked. You must then:
- Enter the PUK (Personal Unblocking Key) code provided by your operator, and validate.
- Enter your PIN number and validate.
- Enter your PIN number again and validate.
After 5 or 10 failed attempts (depending on the type of SIM card), the SIM card is definitely locked. You must then
contact your operator to obtain a new card.
12
Quick start
User guide Roxy FCC_agreement.book Page 13 Mardi, 26. août 2008 3:19 15
Switching ON/OFF
When your phone is off, a short press on the
key will turn it ON.
When the phone is ON, if you are browsing inside the menus, a short press on the
key will come back to the idle screen.
When you are in the idle screen, a long press on the
key will switch OFF the phone.
Network
Once ON, the phone is searching for a network on which it can make calls. If it finds one, it displays the name of the network
on the screen.
Note: if it finds a 3G/UMTS network, the 3G icon is displayed on the screen. If it finds a 3G/HSDPA network, the 3G+ icon is
displayed on the screen.
You are then ready to send or receive a call.
If the network’s name appears, calls are possible on your operator's network.
If the letter R and a network name are displayed, calls are possible on a roaming network provider.
If the letter E is displayed without any network name, only the emergency services are accessible (ambulance, police,
fire brigade).
If the network icon flashes, the phone is in permanent search mode.
If only the icon appears, no network is available.
The
icon is a reception level indicator of the network signal and allows to display the quality of reception (the more
coloured circles are displayed, the more the reception is good).
Quick start
13
User guide Roxy FCC_agreement.book Page 14 Mardi, 26. août 2008 3:19 15
Calls
Calling
Dial the number you want to ring. Press the
key.
You can adjust the sound level (volume) using the navigator upwards or downwards.
At the end of the conversation press the
key to hang up.
International call
Press 0 (hold down) to display " + ", then dial the country code without waiting for the dial tone, then the number of the
called party.
Emergency services
Depending on the network you can obtain the emergency service with or without SIM card or when the keypad is
locked. It is enough to be in an area served by a network.
key.
To obtain the international emergency service, dial 112 then press the
Receiving a call
When you receive a call, the number of your caller is displayed when it is presented by the network.
Press the
key to answer, and speak.
To refuse the call, press the
key.
To stop the ring tone or the vibrate, without refusing the call, press the
key.
Hands-free mode
During a call:
- make a long press on the green key and confirm
or
- press [Options] and select Loudspeaker ON then confirm.
WARNING: in this mode do not bring the phone up to your ear.
When on a call, pressing [Options] allows you to have access to different functions.
Pressing Mute on allows you to switch off the microphone temporarily when you want that your correspondent does not listen.
14
Calls
User guide Roxy FCC_agreement.book Page 15 Mardi, 26. août 2008 3:19 15
Video call
Notes
- The recipient must also be equipped with a phone with this function.
- Video call only operates on the 3G networks (UMTS / HSDPA), then check the presence of the 3G icon on the idle screen
before making a video call.
Making a video call
If you want to call a recipient in video mode, dial number and select [Options]/Video call.
You can also select the number in the phonebook and press [Options]/Video call.
A prompt asks you if you want to confirm the activation of the loudspeaker.
Receiving a video call
When the video mode is activated, you can use the left button of the navigator to change camera (internal/external) and the
up and down keys of the navigator to control the zoom (enlarge/reduce).
Several options are available using video call.
During a video call, press [Options] to access the different options.
Call history
From the idle screen, press the
key to access the call history.
It is divided into four lists that you can display by the navigator: all calls, dialled calls, received calls and missed calls.
Various options are proposed: store a number in your phonebook, call, send a message, etc.
You can also make a call to a number by pressing the
key.
Calls
15
User guide Roxy FCC_agreement.book Page 16 Mardi, 26. août 2008 3:19 15
Call settings
Settings/Calls
This menu allows you to manage all the call functions (call forward, displaying numbers, call waiting, voicemail number, etc.).
Response mode
Auto response
This menu allows your phone to answer automatically to a call when it is connected to a car kit.
Any key
This menu allows you to answer to a call pressing any key.
Display numbers
Send my number
You can decide whether or not your phone’s number will be displayed on the phone of the person you call.
- Yes: your phone’s number will be displayed on the phone of the person you call.
- No: your phone’s number will not be displayed on the phone of the person you call.
- Preset: the phone default mode (depending on the operator subscription type).
My number
- For outgoing calls: status of the Display numbers function.
- For incoming calls: status of the Display numbers function when you have forwarded the incoming calls to another
number.
Caller's Number
- For outgoing calls: status of the Display numbers function when your call is forwarded to another number.
- For incoming calls: status of the caller’s Display numbers function.
Call divert
Depending on your subscription, this service allows you to forward incoming calls to a different number or to the voice mailbox.
Choose the type of forwarding you want from the options available.
Voicemail
This function is for storing your voicemail number.
16
Calls
User guide Roxy FCC_agreement.book Page 17 Mardi, 26. août 2008 3:19 15
Call waiting
(Network dependent service)
During a call, you may be informed that a caller is trying to reach you: you hear a special tone. The caller's number is displayed
on the screen.
Auto redial
This menu allows you to call back a caller you have not managed to reach.
You can set the redial function to Inactive, On request or Systematic.
If you choose On request, your phone will offer to redial your caller automatically if his number is busy.
Video call
This menu allows you to configure video call parameters.
Call reject list
The numbers entered in this list will automatically be rejected by the phone.
Call barring
This menu allows you to block the making or receiving of certain calls.
Before you can use this service, a password will be provided by your operator when you take out your subscription.
Access to this service depends on your subscription type.
To activate call barring :
- Select incoming or outgoing calls.
- Select the call type on which you want to activate call barring.
- Select the call origin.
- Select Activation and enter password.
Blacklist
The blacklist is used to limit failures on automatic calls (calls generated by the automatic redial function or by applications:
data, fax for example).
When several automatic calls failed with a number (number busy or unknown), this number is put in the blacklist and no
automatic call will be done with this number any more until you delete it from the blacklist.
Note: this function does not apply to the calls performed manually.
Calls
17
User guide Roxy FCC_agreement.book Page 18 Mardi, 26. août 2008 3:19 15
Contacts
Using the phonebook
Enter the Contacts menu, the contacts list is displayed if you already get some (otherwise, go to Storing a new contact).
The icon displayed next to a contact’s name shows in which phonebook the contacts is stored.
contact stored in the SIM card
contact stored in the phone
You can search for a contact quiclky by typing the first letters. You can display it by pressing the navigator.
Storing a new contact
Display the Contacts menu, press [Options], Add new contact then Mobile or SIM.
Enter the first name and press the navigator.
Enter the last name and press the navigator.
Enter the number and press the navigator.
Note: you can fill other fields if you store the contact in the phone memory (email, address, ringtone, photo, etc.).
- Press [Save] to store it.
Contact options
To display the various options, select a contact and press [Options].
View contact
It allows you to display the contact's phone number.
Edit
It allows you to edit and/or modify a contact.
Add new contact
See § Storing a new contact.
18
Contacts
User guide Roxy FCC_agreement.book Page 19 Mardi, 26. août 2008 3:19 15
Voice call
It allows you to call the contact selected.
Video call
It allows you to make a video call.
Send
It allows you to send a written or a voice message to the contact selected.
Send Card by
It allows you to send contact details by message, email or Bluetooth®.
Manage
- Delete: it allows you to delete the contact selected. The synchronisation is performed through Bluetooth® or a USB
connection.
- Copy to mobile: allows you to copy the selected contact stored in the phone memory on the SIM card.
- Move to mobile: It allows you to move the contact selected stored in the SIM card to the phone memory.
- Copy to SIM: It allows you to copy a contact from the phone memory to the SIM card. Only the name and the first phone
number will be copied.
- Move to SIM: It allows you to move a contact from the phone memory to the SIM card.
- Duplicate: it allows you to copy contact details to add a new one.
- Copy all: it allows you to copy all the contacts from one memory to the other.
- Delete all: it allows you to delete all the contacts.
Add to group
It allows you to add a contact to a group or to create a new group.
Contact settings
- View contacts: it allows you to select the default phonebook (SIM, phone, SIM and phone) displayed when the phone
switches on.
- Sort contacts by: This menu allows you to select the way to sort contacts in the phonebook (by name or first name).
Note: option available only when the contacts stored in the phone are displayed.
Contacts
19
User guide Roxy FCC_agreement.book Page 20 Mardi, 26. août 2008 3:19 15
Advanced
Assign Speed Dial
It allows you to assign a short number to a contact.
Show groups
A call group allows you to group contacts: this group can be used to send messages easily to all the group contacts (only
contacts stored in the phone memory).
By default, some groups are already created. To add contacts, select [Options]/Edit then select Add.
The list of contacts is displayed. Select the contacts you want and press [Options]/Add.
To create a new group:
- Select [Options]/Add group.
- Enter a name and press the navigator.
- The phone offers to add contacts either immediately (then select the contacts you want to add by pressing the navigator)
or later (on a group press [Options]/Edit/Add. Select the contacts you want to add by pressing the navigator).
Memory
It shows the number of contacts stored in each memory and the available memory space.
Emergency number
This menu lists various emergency numbers.
Prompt to save
After an incoming or outgoing call with a number not stored in the phonebook, this option allows you to activate or deactivate
a request to store the number in the phonebook.
Allowed numbers
This menu allows you to restrict the outgoing calls. This service depends on your SIM card.
When activating this function, only the numbers stored in this phonebook can be called.
This phonebook is linked to the SIM card, and its size depends on the card's capacity.
- Status: allows you to activate or deactivate this service.
- Manage FDN: allows you to manage the numbers stored in this phonebook.
Settings as business card
The details of a contact stored in the phone memory can be saved in a business card.
My details
You can enter the details corresponding to your own number.
20
Contacts
User guide Roxy FCC_agreement.book Page 21 Mardi, 26. août 2008 3:19 15
Synchronization
You can synchronize your contacts stored in the phone memory with those of your computer electronic mails.
The synchronization is done by activating Bluetooth® or by connecting a USB cable between the phone and a computer and
using Wellphone software (available on www.wellphone.com/sagem).
Synchronization parameters
You can directly enter the contacts database settings.
Contacts
21
User guide Roxy FCC_agreement.book Page 22 Mardi, 26. août 2008 3:19 15
Messaging
The Messaging menu contains the following message types: text messages (SMS, MMS), voice messages and e-mail. MMS
is a Multimedia Message Service, which allows you to enclose photos, audio files, and others rich contents to your messages;
these messages can even be composed of several slides. MMS are differently charged to SMS are. Please contact your
network provider to get more information on their cost and the service availability.
Creating a text message or an e-mail
- Select Messaging/Create new.
- Select Message or Email.
Note: The [Options] key allows you to select various options for typing the text.
There are two input modes. To switch from one mode to another (ABC mode/T9 mode), make a long press on the
key.
To switch into upper case/lower case/figures make a short press on the
key.
Also you can make your choice by selecting [Options]/Input mode.
- ABC mode: it allows you to type letters: press on one key several times to make the letter wanted appear (for example:
press twice the 2 key to display B).
• abc: lower case text
• ABC: upper case text
• Abc: first letter of the word in upper case
- 123 mode: it allows you to type figures
- T9 mode (see below for using it)
• abc T9: lower case text
• ABC T9: upper case text
• Abc T9: first letter of the word in upper case
22
Messaging
User guide Roxy FCC_agreement.book Page 23 Mardi, 26. août 2008 3:19 15
Using T9 Mode
The Easy Message T9® mode helps you to easily write your messages.
The language used is the one selected on the display of the phone (if the language selected is not
compatible with the Easy Message T9®, the English language will be automatically selected).
Press once the key corresponding to the letter chosen and compose the word by continuing to press the
keys corresponding to the various letters without paying attention to the display: the word is highlighted.
The same sequence of keys pressed can correspond to several words, existing on the dictionary. In this
case, a list of choices is displayed. If the first word that appears is not the word you expected, press the navigator downwards
or upwards to scroll through the words corresponding to this key sequence.
Once you agree on the word proposed on the screen, press the navigator rightwards to validate it or on the 0 key (which
validates and inserts a space after the word), and go on writing the next word.
If the word you are expected is not proposed, please add characters until you get the message Add new word. Validate if
the word displayed suits you or modify this word before adding it in the dictionary.
Punctuation characters
Punctuation characters are obtained by pressing the 1 key (except in 123 mode), or by briefly pressing the
key).
Accented characters
Accented characters are generated automatically in T9 mode.
In ABC mode accented characters are available by pressing the key supporting the non-accented character repeatedly.
Saving the message without sending it
Press [Options] and then select Save As/Draft (the message is stored in the Drafts folder) or Template (the message is
saved in the Templates folder).
Sending the message
Once the text is entered, press [Options] and select Select recipient.
You can choose between:
- select a number in your phonebook,
- enter a number manually,
- enter an email address,
- select a call group.
Press the navigator to send the message.
Messaging
23
User guide Roxy FCC_agreement.book Page 24 Mardi, 26. août 2008 3:19 15
Receiving messages
When you receive a message, the phone plays the ring tone that you selected in the Ringtones menu, a message icon is
displayed on the screen of your phone and the light indicator above the screen flashes.
As long as the event is not taken into account, the light indicator flashes.
If you do not read the messages, the message icon remains displayed on the screen. When it is red, the memory is full.
Receiving icons, wallpapers or ring tones may take several seconds. An icon is flashing when the download of your message
is in progress.
Three options are available to receive MMS:
- Always: you will receive MMS directly on your phone.
- On request: you will receive only a notification in your Inbox, meaning that a MMS is available on the MMS Server.
- Always reject: MMS are received in your inbox without notification.
Creating and sending a voice message
You can record a voice message and enclose it to a MMS to send it to a recipient.
- Select Messaging/Create new/Voice message.
- Press [Start] to record your voice message.
- Press [Stop] once completed.
- Press [Options] and select Add to join it to a MMS. Then you can send it.
Messaging menu
Create new
This menu allows you to create a message, a voice message or a e-mail.
Inbox
This menu is divided in two lists: the SMS or MMS messages received and the e-mail received.
Messages are listed in chronological order, the latest one being displayed first.
The quantity of Not Read and Not Retrieved messages is shown. Not Retrieved and Not Read messages are shown in bold.
Drafts
In this menu there are the messages created saved as drafts.
When you select a message and press [Options], various options can be selected.
24
Messaging
User guide Roxy FCC_agreement.book Page 25 Mardi, 26. août 2008 3:19 15
Sent messages
The Sent messages menu is used to store all your sent messages if you activated the option Store sent messages in the
Settings menu.
Outbox
This menu displays the messages that have not been sent. You can therefore send them again.
Email accounts
This menu allows access to the management of email accounts.
Templates
In this menu there are the messages created saved as templates.
The same options as for the drafts are available for the templates.
Message archive
This menu is used to archive your messages received.
For each message, its characteristics (shown with an icon) are displayed on the screen.
Call voicemail
This function allows you to call your voicemail.
Note: if your voicemail number has not been entered yet, you must enter it in the menu Settings/Calls/Voicemail.
Settings
This menu allows you to select various sending and receiving options and customization options to create messages.
Messaging
25
User guide Roxy FCC_agreement.book Page 26 Mardi, 26. août 2008 3:19 15
Multimedia functions
Music player
This menu allows you to listen to music files in a contiuous way like a portable music player.
You can download music files using WAP or connecting your phone to a computer.
You can also use a memory card in which music files are sotred.
Short press:
- From the idle screen: access to the music player and FM radio
- From the music player: back to the idle screen
Long press:
Listening to music (
icon displayed on the idle screen): stop listening to music
Adjusting the volume
Recently played
It allows you to play a music file or several music files selected.
26
Multimedia functions
User guide Roxy FCC_agreement.book Page 27 Mardi, 26. août 2008 3:19 15
My Music
All tracks
It is the directory of all the music files.
To display the different options, press [Options]:
- Play: to play a music file.
- Play Mode: to select the way to play the music files.
- Add to playlist: to add a music file to a playlist.
Note: music files stored on the memory card are automatically added to the list.
- Send by: to send the music file by message or Bluetooth®.
- Details: properties of the music file selected.
Playlists
New Playlist
Type a name and press [Save]. Then a prompt asks you if you want to insert music files now.
Recently played tracks
The Recently played tracks is an intelligent playlist, which remembers the tracks you have recently listened to.
List of the playlists
On a list press [Options] to display the different options:
- Select: to display the content of a playlist.
- Play: to play a playlist contents.
- Add tracks: to add a music file to a playlist.
- Delete playlist: to delete the playlist.
- Rename: to rename the playlist.
Artists
It is the directory of the music files sorted by artist.
Albums
It is the directory of the music files sorted by title.
Genres
It is the directory of the music files sorted by style.
Multimedia functions
27
User guide Roxy FCC_agreement.book Page 28 Mardi, 26. août 2008 3:19 15
FM Radio
Important: you must connect the hands free kit to operate the FM radio. The radio aerial is contained in the hands free kit.
Two lists of stations are available for the FM radio:
- User list: list of stations saved by the user.
- Automatic search list: this list is filled in by the automatic search feature.
Using the FM Radio
Start the FM Radio application from the main menu (or from the Music player/FM Radio menu).
To exit the FM Radio application while continuing to listen to the radio, use the [Back] key or the small side key.
To return to the FM Radio application from the Home screen, press the small side key.
To switch off the FM Radio, use the red key.
Main screen
- To navigate through the stations saved, use the navigator up or down directions.
- To listen to a saved station, press the alphanumeric keypad key that corresponds to the station number. For station
numbers above 9, do a long press on the first digit of the station number and then a short press on the second digit.
- To adjust the frequency, do short presses on the right or left directions of the navigator.
- To search for a station, do a long press on the right or left directions of the navigator.
- To adjust the sound level, use the + and - side keys.
- To mute the sound, use the
key.
- To pause the FM radio, press the central part of the navigator.
After connecting the hands free kit, select the FM Radio application.
[Options] lets you access the different functions of the radio:
- Mute
- Loud speaker on
- Switch to auto scan list
- Auto Scan
- Save to my list
- View lists
- Settings
- Minimize
- Quit
How using the navigator while listening to the radio FM
- Up and down: next/previous station (short press)
- Left and right: change in steps (short press) - find stations (long press)
- Pressing central part: play/pause
28
Multimedia functions
User guide Roxy FCC_agreement.book Page 29 Mardi, 26. août 2008 3:19 15
Photo and video
The Camera menu allows you to take photos and use them for different purposes. For instance, you can send them to another
phone or an Internet address, store them and use the photos as wallpapers.
Taking a photo
Settings before taking a photo
Pressing [Options], various options can be selected:
- Take photo: to take the photo.
- Flash On: to select the flash.
- Antishake On: to activate or deactivate the stabilizer function.
- Timer: to take a photo with a 5, 10 or 15 second time delay.
- Camera mode: to select luminosity.
- Effects: to select an effect.
- Change camera: to change from one lens to another.
- Settings: to select storage location, click sound, photo format and quality.
Taking a photo
- Select the Camera menu. Look into your phone display and position your subject. Move your phone to position your photo.
- Press the navigator, the photo is taken and automatically saved. It stays on the phone display.
- If you want to send the photo immediately, press the navigator. The creating message screen is displayed to type a text if
necessary.
Options once the photo taken
- Send by: allows you to send the photo by MMS, e-mail or Bluetooth®.
- New: allows you to take a new photo.
- Delete: allows you to delete the photo.
- Rename: allows you to modify the name of a photo.
- Add to contact: allows you to assign a photo to a contact.
- Set as wallpaper: allows you to select the photo as a wallpaper.
Note: using the camera during a call may disturb the call quality.
Multimedia functions
29
User guide Roxy FCC_agreement.book Page 30 Mardi, 26. août 2008 3:19 15
Taking a video
- Select the Camera menu and press the navigator rightwards to switch into video mode.
Settings before taking a video
Pressing [Options], various options can be selected:
- Record video: to take a new video.
- Video Torch On: to select the torch.
- Settings: to select the video quality, the recording time, the recording of the sound and the storage location.
- Change camera: to change from one lens to another.
Recording a video
- Press the navigator to record then press [Stop] when you want to stop recording.
The video is automatically saved and has a number. It is saved in Multimedia/My Album.
Note: the phone automatically stops recording when the maximum size available is reached.
Options once the video recorded
- Send by: allows you to send the video by Message, Email or Bluetooth®.
- Playback: allows you to play the video.
- New: allows you to take a new video.
- Delete: allows you to delete a video.
- Rename: allows you to modify the name of a video.
Note: the videos are saved in the phone with a .3gp format.
Multimedia
The Multimedia menu contains the directories of all the multimedia objects recorded in your phone and the downloaded
objects (photos, videos, ringtones, musics, bookmarks, games, etc.).
To display the various options, press [Options] after having selected an object.
Note: To play a video, you can watch it in full screen by pressing the navigator upwards or downwards and return to normal
screen by pressing the navigator leftwards or righwards.
30
Multimedia functions
User guide Roxy FCC_agreement.book Page 31 Mardi, 26. août 2008 3:19 15
Entertainment/My Games
Your phone contains one or several games, depending on model. You can
download more. You are the owner of a Roxy mobile phone which gives you the
ability to download applications and games to be executed on your phone thanks
to the built-in Java™ engine.
However, receiving applications from everywhere implies some basic knowledge
of the possible effects of such download.
We advise you to dwonload certified games or applications from your operator
sites or from www.planetsagem.com.
By default, the connection URL of your operator or of PlanetSagem is configured
in your phone.
My Applications
This menu contains the applications you have downloaded.
Multimedia functions
31
User guide Roxy FCC_agreement.book Page 32 Mardi, 26. août 2008 3:19 15
Connection functions
Browser
The Browser function allows you to log onto certain Internet sites. You can log onto sites that allow you to download ringtones,
icons, animated screensavers, Java™ applications, videos to your phone.
The WAP browser is under licence:
The WAP browser and the softwares
included are the exclusive property of
Openwave. For this reason, it is
forbidden to modify, translate,
disassemble or even decompile all or
part of these softwares.
Home: logs onto the home page (carries the name of your access provider).
Open page: this menu allows you to type an Internet address.
Favourites: allows to store bookmarks (addresses of Internet sites).
A bookmark stored in the list can be modified, sent or deleted.
You can receive bookmarks and add them to this list.
History: backward and forward navigation of the pages displayed are kept in
memory.
Alert inbox: this menu contains information messages about sending and
receiving (deliveries, failures, etc.).
Settings: various settings for the WAP connection.
Logging on
The connection to a service on the GPRS/EDGE/UMTS/HSDPA network is not cut if an incoming call is received. You can
answer the call.
Downloading objects
Some Internet sites allow you to download ringtones, icons, animated screensavers, games or Java™ applications. Once
downloaded, they are stored in your phone's memory (Multimedia). You can then save them in your phone (same operation
as used for downloading using messages).
32
Connection functions
User guide Roxy FCC_agreement.book Page 33 Mardi, 26. août 2008 3:19 15
Logging off
To log off, press the
key. The logoff happens automatically after a few seconds of inactivity if you forget to log off. This
period is defined by the linger time setting.
Connectivity
You can exchange with other devices (PC, mobile phones, personal assistants, printers, etc.) various data: pictures, sounds,
photos, videos, ToDo tasks, organiser events, contacts, etc.
Data exchange can be done through:
- a USB cable,
- a Bluetooth® connection.
Bluetooth®
Bluetooth® is a technology used to establish a wireless connection with other Bluetooth® equipped devices: for example, with
a pedestrian kit or a car kit to phone or with a PC to swap data. The range is about 10 m.
The Bluetooth® menu contains the following entries:
My devices
This menu lets you draw up the list of devices with which the Bluetooth® connection is secure (by authentication and
encryption).
A device must be added to this list before it can be used in Bluetooth® with your phone except for exchanging objects. When
you select send by Bluetooth® (photo, Todo task, contact details, etc.) the phone displays the list of devices. You do not need
to select a device from this list at this time, you can start a one-off search for a device when you initiate sending.
See below for the pairing procedure.
My Bluetooth name
This is the name used to identify your phone when it is detected by another Bluetooth® device.
Mode
With this menu you can, on the one hand, activate and deactivate the Bluetooth® function and, on the other, when the
Bluetooth® function is activated, select whether you want other Bluetooth® devices to be able to detect your device.
- Off: the Bluetooth® function is not available.
- On & hidden: your phone is not visible. It cannot be detected by other Bluetooth® devices. In this mode, a device can only
connect to your phone using Bluetooth® if you have already paired it. This mode lets you detect other devices and pair with
them from your phone.
- On & visible for 3 minutes: your phone is visible for a period of 3 minutes. During this period, it can be detected by the
other Bluetooth® devices. Select this mode when a pairing with your phone has been initiated from another Bluetooth®
device.
Connection functions
33
User guide Roxy FCC_agreement.book Page 34 Mardi, 26. août 2008 3:19 15
- On & visible: your phone is visible and can be detected by the other Bluetooth® devices as long as this mode is selected.
IMPORTANT:
- Activation of Bluetooth® function reduces the phone battery life. We advise you to deactivate it when not in use.
- Bluetooth® security is better guarded because your phone remains invisible to the other devices.
Pairing procedure
Select My devices/New device.
If the Bluetooth® function is not active, the phone prompts you to activate it using one of the 3 modes described above.
The phone searches for visible Bluetooth® devices and displays the list. Select the device concerned and validate your
choice. Your phone then prompts you to enter a code which must be the same as the code entered on the remote device.
Enter and validate this code: Your phone is now paired with the remote device.
A connected device is shown in blue in the list.
[Options] on the name of a device lets you access the following options:
- Activate which is used to activate the connection with the device (this step is necessary after the pairing operation) and
Deactivate which is used to deactivate the connection with the device (if the device is activated).
- Rename: this is used to modify the name of the device.
- Always allow: this is used to allow always the connection with the device selected.
- Delete: this is used to delete the device. WARNING: using this function needs starting the pairing over again.
- Delete all: this is used to delete all your devices. WARNING: using this function needs starting the pairing over again.
Notes:
- Refer to the user manual of the device with which you are pairing to find out how to set this device to the mode allowing
this operation.
- The code of the remote device may be predefined by the device manufacturer. In this case, refer to the user manual of this
device to find out this code.
USB mode
This mode lets you access, from a computer, the files you have saved in the phone memory or on the memory card.
- You must first install a USB driver on your computer. Surf to www.planetsagem.com to download the latest installation
drivers.
- After connecting the USB cable to your phone and your computer, select Enable in the Mass storage option.
You can then use the Windows file explorer to consult your multimedia files on your phone and swap data between the phone
and computer, etc.
34
Connection functions
User guide Roxy FCC_agreement.book Page 35 Mardi, 26. août 2008 3:19 15
Important note: when the phone is connected to the computer in USB mode:
- The memory card is not detected by the phone. This means that if you have configured your phone with a background or
ringtone stored on the memory card, they will not be used during this connection.
- The camera is also not accessible, either in photo mode or video mode.
- You cannot access your files from the phone when the USB cable is connected. In the event of a specific need, select
Disable in the Mass storage option so you can just access your files from the phone. You will not be able to access them
from the computer.
The USB Mode/Charge menu lets you disable charging via the USB cable when the cable is connected to a computer.
Synchronize
This menu allows you to configure all the synchronization parameters.
Profiles list
This menu allows you to set various parameters needed for WAP browser connection.
You can add or modify URL addresses.
Networks
This menu allows you to configure network preferences.
- Search: to activate (automatically or manually) one of the networks accessible in the area in which your are located.
- Preferred networks: to view all the pre-registered networks.
- Settings: to select your network: Automatic, GSM, UMTS.
Connection functions
35
User guide Roxy FCC_agreement.book Page 36 Mardi, 26. août 2008 3:19 15
Phone customization
Profiles setting
Settings/Phone/Profiles
This menu allows you to set profiles containing selections of different volume to adapt them to various circumstances (for
instance, depending on where you are (at work, at home, etc.) you will select such or such profile.
Notes:
- From the idle screen, you can directly access to the profiles by pressing the big side key.
- From the idle screen, you can activate silent mode by a long press on the
key.
Ringtones
Settings/Phone/Ring tone
This menu allows you to display and if necessary modify the ring tones selected for calls, video calls and incoming messages.
Date and Time
Settings/Phone/Date and time
Set time/Set date
These menus allow you to set the various date and time settings (format, display, time zone, daylight saving,etc).
Keypad lock
Settings/Phone/Keypad lock
This menu allows you to lock the keyboard to avoid unwanted key presses.
- Automatic: once the time set in eco-mode elapsed (Settings/Display/Backlight/Economic mode menu), the keypad
locks.
key and then on the browser, or making a long press the
key from the
- Manual: lock the keypad pressing the
idle screen.
Unlocking the keyboard
To unlock the keyboard, press the
key then the navigator or [OK].
36
Phone customization
User guide Roxy FCC_agreement.book Page 37 Mardi, 26. août 2008 3:19 15
Languages
Settings/Phone/Languages
This menu allows you to choose your phone's display language.
Security
Settings/Phone/Security
This menu allows you to configure your phone's security settings.
PIN protection
This menu allows you to activate or deactivate the PIN code when switching on the phone
Modify PIN code
This menu allows you to activate and modify your phone's PIN.
To modify the PIN, select Modify PIN code and [Select].
Enter old PIN and validate.
Enter new PIN twice and validate.
To activate or deactivate the PIN, select the Control PIN menu and [Select].
Enter PIN and validate.
Select Activate or Deactivate and validate.
Modify PIN2 code
You have a second PIN number to allow you to access certain functions (*).
Proceed as above in order to modify PIN number 2 of your phone.
(*) These functions may or may not be available depending on your SIM card.
Phone customization
37
User guide Roxy FCC_agreement.book Page 38 Mardi, 26. août 2008 3:19 15
Phone lock
This menu allows you to activate a code which will be requested when the phone is switched on if a different SIM card is used.
This code is automatically linked to the SIM card installed when the phone is activated. This code is a secret code to protect
the phone if stolen.
To activate or deactivate the code:
- Select Lock mode and [Select].
- Select Enable or Disable and [Save].
- Enter 0000 (the factory code, by default) and validate.
To modify the phone code:
- Select Change lock code and [Select].
- Enter the old code and validate.
- Enter the new code and validate.
- Enter the code again to confirm it and validate.
Confidentiality
This menu allows the activation or deactivation of automatic deletion, after power off/on, of outgoing calls, messages stored
or organiser events.
Select Activate or Deactivate and validate.
Operator
This menu allows you to modify the call barring.
Access to this service depends on your type of subscription.
Photo, video and dictaphone settings
Settings/Phone/Camera & Voice
This menu allows you to select the camera, video and voice recorder settings.
Storage location
Settings/Phone/Storage location
This menu allows you to select (phone memory or memory card) where the sounds, pictures, videos or applications
downloaded will be stored.
38
Phone customization
User guide Roxy FCC_agreement.book Page 39 Mardi, 26. août 2008 3:19 15
Memory
Settings/Phone/Memory
This menu displays the memory space used for the various functions.
Display
Settings/Display
Wallpaper
Press the navigator. You can select a wallpaper through the phone default wallpapers and the pictures downloaded (More
files) or no wallpaper (Not displayed).
Select [Save] once your choice made.
Backlight
You can choose the backlight level, the inactivity time after which the phone will automatically switch into economic mode
(screen off) and the way to exit the economic mode (any key or red key).
Startup animation
This menu allows you to display an animation when the phone is switched on.
Operator logo
This menu allows you to display your operator's logo on the idle screen (depending on model).
Shortcuts
This menu allows you to allocate functions to the directional keys of the navigator.
Phone customization
39
User guide Roxy FCC_agreement.book Page 40 Mardi, 26. août 2008 3:19 15
Other functions
Calendar
Applications/Calendar/Options
This menu gives you access to your diary and get to a day, week, month or specific date. It lets you add events, access the
global actions for all the events and manage them by event category.
- Add written event/Add vocal event: allows you to add events of the text or voice type. Fill in the different items. Save the
event.
- Delete: allows you to delete events by selection of a date.
- Memory: allows you to view the memory capacity used by the different functions of your phone (audio, video, picture, etc.).
- Synchronize: you can synchronize your calendar with data of your computer. The synchronization is done by activating
Bluetooth® or by connecting a USB cable between the phone and a computer and using Wellphone software (available on
www.wellphone.com/sagem).
- Synchronization parameters: you can directly enter the calendar database settings.
The other menus are:
- See month: allows you to access events on a month-by-month basis.
- View week: allows you to access events on a week-by-week basis.
- See today: allows you to access the events for the current day and the actions possible on any event.
- See date: allows you to access events at a specific date.
- Settings: allows you to select various settings for the events.
40
Other functions
User guide Roxy FCC_agreement.book Page 41 Mardi, 26. août 2008 3:19 15
ToDo
Applications/ToDo
This menu allows you to add ToDo's, access category-based ToDo management and delete one or all the ToDo's.
If there are not any ToDo, you directly access to the options below.
- Add written todo/Add vocal todo: allows you to add ToDo of the text or voice type. Fill in the different items. Save the
ToDo.
- Settings: allows you to select various settings for the ToDo.
- Import:allows you to import a ToDo from a Multimedia directory.
- Synchronize: you can synchronize a ToDo with data of your computer. The synchronization is done by activating
Bluetooth® or by connecting a USB cable between the phone and a computer and using Wellphone software (available on
www.wellphone.com/sagem).
- Synchronization parameters: you can directly enter the ToDo’s database settings.
If there is a ToDo, press [Options] to display the options.
Clock
Applications/Clock
Alarm
This menu allows you to set and activate the alarm,
- Select [Add] or [Options]/Add.
- Enter the time selected for the alarm.
- Select Enable.
- Select [Next] and select the alarm activation recurrence.
The alarm works even when the phone is switched off.
The alarm icon appears on the idle screen.
Stop Watch
This menu allows you to use the chronometer function and to store the lap times.
Timer
This menu allows you to use the timer function.
Synchronization
This menu allows you to activate the synchronization for the Contacts, Calendar or ToDo functions.
Other functions
41
User guide Roxy FCC_agreement.book Page 42 Mardi, 26. août 2008 3:19 15
Calculator and converter
Applications/Calculator
This menu allows you to use your phone as a calculator.
Use the following keys to make calculations:
- S: Add, T: Subtract, X: Multiply, W: Divide
The following keys are used for:
- Left key: Convert or add to memory
- Right key: Delete
: Decimal point.
Torch lamp
This menu allows you to activate the flash and to use it as a torch lamp.
You can assign a shortcut to one of the navigator keys (Settings/Display/Shortcuts menu).
Local information
Applications/Local info.
This menu is used to activate reception of local information broadcast by the network.
You can choose whether you want to receive this information or not (please contact your network provider).
Services
Applications/Services
This item may not be present on your phone’s menu, as its contents depends on your SIM.
Dictaphone
Applications/Dictaphone
This menu allows you to record your voice or a sound.
42
Other functions
User guide Roxy FCC_agreement.book Page 43 Mardi, 26. août 2008 3:19 15
Help
Applications/Help
This menu allows you to display help pages for the using of your phone.
First select the language you want.
Note: displaying help pages is done with a free WAP connection.
Other functions
43
User guide Roxy FCC_agreement.book Page 44 Mardi, 26. août 2008 3:19 15
Technical features
Weight: 95 g
Size: 108 x 48 x 11 mm
Original battery: Li-ion 920 mAh
Battery life (*):
- Standby: up to 220 h
- Calls: up to 3 h
- Music mode: 6 h
Camera: 3.2 megapixels and flash
Multimedia objects supported:
- Audio formats: Midi, WAV, AMR NB, AMR WB, XMF, MP3, AAC, AAC+, eAAC+
- Graphic formats: bmp, jpeg, png, gif
- Video formats: H.263, H.264, 3GP, MPEG4
Size of memory available for messages, the phonenook and the multimedia objects: up to 65 Mb
Maximum size of each message:
- SMS: < 160 characters
- MMS: the phone supports MMS sizes up to 300 kB both for outgoing and incoming messages (depending on the phone
configuration and on the operator reservations)
Memory card type: microSHDC™
Using temperature: from - 10 °C to + 55 °C
(*) These values are theoretical ones and given for information only.
44
Technical features
User guide Roxy FCC_agreement.book Page 45 Mardi, 26. août 2008 3:19 15
Certification and safety information for the United
States and countries using FCC standards
FCC Part 15 statement
This device complies with part 15, part 22 and part 24 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING
Changes or modifications made to this equipment not expressly approved by Sagem Mobiles for compliance could void the
user's authority to operate the equipment.
Certification and safety information for the United States and countries using FCC standards
45
User guide Roxy FCC_agreement.book Page 46 Mardi, 26. août 2008 3:19 15
FCC SAR information
THIS MODEL PHONE MEETS THE FCC'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure
to radiofrequency (RF) energy set by the United States Federal Communications Commission (FCC). These limits are part
of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based
on standards that were developed by independent scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless
of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate,
or SAR. The SAR limit set by the FCC and Health Canada is 1.6 W/kg (*). Tests for SAR are conducted using standard
operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating
can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower
the power output.
Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the
RF limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and
locations (i.e., at the ear and worn on the body) as required by the FCC for each model.
The highest SAR value for these model phones as reported to the FCC when tested for use at the ear and when worn on the
body are (measured at a distance of 0.59 inches (1.5 cm)):
SAR at the ear (W/kg)
SAR worn of the body (W/kg)
PCS 1900
PCS 1900
0.515
0.416
(*) In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kilogram (W/kg)
averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection
for the public and to account for any variations in measurements.
46
Certification and safety information for the United States and countries using FCC standards
User guide Roxy FCC_agreement.book Page 47 Mardi, 26. août 2008 3:19 15
While there may be differences between the SAR levels of various phones and at various positions, they all meet the FCC
requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated
as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can
be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID M9HDX07S2 (my511X).
Additional Information can be found on the website of the World Health Organization (http://www.who.int/emf).
Safety Information
Aircraft: Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers
a “flight mode” or similar feature, consult airline staff as to its use in flight.
Driving: Full attention should be given to driving at all times, and regulations restricting the use of wireless devices while
driving must be observed. For further driving safety tips, please refer to Driving safety tips at page 51.
Hospitals: Mobile phones should be switched off whenever you are requested to do so in hospitals, clinics or health care
facilities. These requests are designed to prevent possible interference with sensitive medical instruments.
Gas stations: Obey all posted signs with respect to the use of wireless devices or other radio equipment in locations with
flammable material and chemicals. Switch of your wireless device whenever you are instructed to do so by authorized staff.
Interference with personal medical devices: You should always consult your physician and review the device
manufacturer's instructions to determine if operation of your phone may interfere with the operation of your medical device.
As a general rule:
- For pacemakers: Pacemaker manufacturers recommend that a minimum separation of 6 inches (15 cm) be maintained
between a mobile phone and a pacemaker to avoid potential interference with the pacemaker. To achieve this, use the
phone on the opposite ear to your pace maker and do not carry it in a breast pocket.
- For hearing aids: Some digital wireless phones may interfere with some hearing aids. In the event of such interference,
you may want to consult your hearing aid manufacturer to discuss alternatives.
The ring tone, info tones, and handsfree talking are reproduced through the loudspeaker. Do not hold the phone to your ear
when it rings or when you have switched on the handsfree function (at least 3.9 inches (10 cm)).
Use only batteries and charging devices designed for your phone. Otherwise you risk serious damage to health and property
and may void any warranty.
CAUTION! Small parts like the SIM card could be swallowed by young children.
Do NOT open the phone. Only the battery and the SIM card may be removed. Do NOT open the battery.
Keep the battery out of chidren’s reach. Do not allow the battery to be put into the mouth.
Certification and safety information for the United States and countries using FCC standards
47
User guide Roxy FCC_agreement.book Page 48 Mardi, 26. août 2008 3:19 15
Distance of operation
This phone is designed to comply with the FCC radio frequency (RF) exposure guidelines when used as follows:
- Against the ear: Place or receive a phone call and hold the phone as you would a wireline telephone.
- Body worn: When transmitting, place the phone in a carrying accessory that contains no metal and positions the phone
a minimum of 0.59 inches (1.5 cm) from your body. Use of other accessories may not ensure compliance with exposure
guidelines. If you do not use a body worn accessory and are not holding the phone at the ear, position the phone a
minimum of 0.59 inches (1.5 cm) from your body.
- Data operation: When using a data feature, position the phone a minimum of 0.59 inches (1.5 cm) from your body for the
whole duration of the data transmission.
FDA consumer information on wireless phones
The US Food and Drug Administration (FDA) provides consumer information on wireless phones
at: http://www.fda.gov/cellphones/qa.html.
Following are safety related questions and answers discussed at this web site:
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are associated with using wireless phones. There
is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy
(RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas
high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological
effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by
additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the
reasons for inconsistent results.
What is FDA's role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones
are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the
manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the
hazard no longer exists.
48
Certification and safety information for the United States and countries using FCC standards
User guide Roxy FCC_agreement.book Page 49 Mardi, 26. août 2008 3:19 15
Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take
a number of steps, including the following:
- Support needed research into possible biological effects of RF of the type emitted by wireless phones;
- Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and
- Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone
use on human health.
FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety
to ensure coordinated efforts at the federal level. The following agencies belong to this working group:
- National Institute for Occupational Safety and Health
- Environmental Protection Agency
- Federal Communications Commission
- Occupational Safety and Health Administration
- National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones
that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and
other health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless phones. Base stations are thus not the primary subject of the
safety questions discussed in this document.
What is FDA doing to find out more about the possible health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that
high priority animal studies are conducted to address important questions about the effects of exposure to radiofrequency
energy (RF).
FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since
its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that
has driven the establishment of new research programs around the world. The Project has also helped develop a series of
public information documents on EMF issues.
Certification and safety information for the United States and countries using FCC standards
49
User guide Roxy FCC_agreement.book Page 50 Mardi, 26. août 2008 3:19 15
FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and
Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining
input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through
contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone
users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research
developments around the world.
What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone?
If there is a risk from these products--and at this point we do not know that there is--it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radiofrequency
energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
If you must conduct extended conversations by wireless phone every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset
and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless
phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radiofrequency energy (RF), the measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and
the RF source will reduce RF exposure.
Some groups sponsored by other national governments have advised that children be discouraged from using wireless
phones at all.
Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that
handsfree kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These systems
reduce the absorption of RF energy in the head because the phone, which is the source of the RF emissions, will not be placed
against the head. On the other hand, if the phone is mounted against the waist or other part of the body during use, then that
part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements
regardless of whether they are used against the head or against the body. Either configuration should result in compliance
with the safety limit.
50
Certification and safety information for the United States and countries using FCC standards
User guide Roxy FCC_agreement.book Page 51 Mardi, 26. août 2008 3:19 15
Do wireless phone accessories that claim to shield the head from RF radiation work?
Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from
RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone.
Studies have shown that these products generally do not work as advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may be forced to boost its power to compensate, leading to an
increase in RF absorption.
Driving safety tips
Wireless phones give people the ability to communicate almost anywhere, anytime. But an important responsibility
accompanies those benefits, one that every wireless phone user must uphold. When driving a car, driving is your first
responsibility.
Below are safety tips to follow while driving and using a wireless phone that should be easy to remember.
Get to know your wireless phone and its features such as speed dial and redial.
When available, use a hands free device.
Position your wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you
get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.
Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous
weather conditions.
Do not take notes or look up phone numbers while driving.
Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan
your calls before you begin your trip. But if you need to dial while driving, follow this simple tip--dial only a few numbers, check
the road and your mirrors, then continue.
Do not engage in stressful or emotional conversations that may be distracting.
Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident, road
hazard or medical emergency.
Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious
emergency where lives are in danger, call 9-1-1 or other local emergency number.
Call roadside assistance or a special wireless non-emergency assistance number when necessary. If you see a broken-down
vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured or a vehicle
you know to be stolen, call roadside assistance or other special non-emergency wireless number.
Certification and safety information for the United States and countries using FCC standards
51
User guide Roxy FCC_agreement.book Page 52 Mardi, 26. août 2008 3:19 15
Certification and safety information for Europe and
countries using CE standards
CE Declaration of Conformity
52
Certification and safety information for Europe and countries using CE standards
User guide Roxy FCC_agreement.book Page 53 Mardi, 26. août 2008 3:19 15
CE SAR information
THIS MODEL MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines were developed by the independent scientific organization
ICNIRP and include safety margins designed to ensure the protection of all persons, regardless of age and health.
The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices
is 2 W/kg and the highest SAR value for this device when tested at the ear was 1.35 W/kg (*). As mobile devices offer a range
of functions, they can be used in other positions, such as on the body as described in this user guide (**).
As SAR is measured utilizing the devices highest transmitting power the actual SAR of this device while operating is typically
below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the
minimum level required to reach the network.
The World Health Organization has stated that present scientific information does not indicate the need for any special
precautions for the use of mobile devices. They note that if you want to reduce your exposure then you can do so by limiting
the length of calls or using a 'hands-free' device to keep the mobile phone away from the head and body. Additional
Information can be found on the websites of the World Health Organization (http://www.who.int/emf)
Advice for limiting exposure to radiofrequency (RF) fields
For individuals concerned about limiting their exposure to RF fields, the World Health Organization (WHO) provides the
following advice:
Precautionary measures: Present scientific information does not indicate the need for any special precautions for the use of
mobile phones. If individuals are concerned, they might choose to limit their own or their children’s RF exposure by limiting
the length of calls, or using "hands-free" devices to keep mobile phones away from the head and body.
Further information on this subject can be obtained from the WHO home page http://www.who.int/peh-emf WHO Fact sheet
193: June 2000.
(*) The tests are carried out in accordance with international guidelines for testing.
(**) Please see the Distance of operation section about body worn operation, page 55.
Certification and safety information for Europe and countries using CE standards
53
User guide Roxy FCC_agreement.book Page 54 Mardi, 26. août 2008 3:19 15
Safety
Never attempt to disassemble your phone. You alone are responsible for how you use your phone and any consequences of
its use.
As a general rule, always switch off your phone wherever the use of a phone is prohibited.
Use of your phone is subject to safety measures designed to protect users and their environment.
Do not use your phone in damp areas (bathroom, swimming pool…). Protect it from liquids and other moisture.
Do not expose your phone to extreme temperatures lower than - 10°C and higher than + 55°C.
The physicochemical processes created by chargers impose temperature limits when charging the battery. Your phone
automatically protects the batteries in extreme temperatures.
Do not leave your phone within the reach of small children (certain removable parts may be accidentally ingested).
Electrical safety
Only use the chargers listed in the manufacturer’s catalogue. Using any other charger may be dangerous; it would also
invalidate your warranty. Line voltage must be exactly the one indicated on the charger’s serial plate.
Aircraft safety
When travelling by plane, you will need to switch your phone off when so instructed by the cabin crew or the warning signs.
Using a mobile phone may be dangerous to the operation of the aircraft and may disrupt the phone network.
Its use is illegal and you could be prosecuted or banned from using cellular networks in the future if you do not abide by these
regulations.
Explosive materials
Please comply with warning signs at petrol stations asking you to switch your phone off. You will need to comply with radio
equipment usage restrictions in places such as chemical plants, fuel depots and at any location where blasting operations
are under way.
Electronic equipment
To avoid the risk of demagnetisation, do not leave electronic devices close to your phone for long periods of time.
Electronic medical equipment
Your phone is a radio transmitter which may interfere with electronic medical equipment or implants, such as hearing aids,
pacemakers, insulin pumps, etc. It is recommended that a minimum separation of 15 cm be maintained between the phone
and an implant. Your doctor or the manufacturers of such equipment will be able to give you any advice you may need in this
area.
Hospitals
Always make sure that your phone is switched off in hospitals when so instructed by warning signs or by medical staff.
54
Certification and safety information for Europe and countries using CE standards
User guide Roxy FCC_agreement.book Page 55 Mardi, 26. août 2008 3:19 15
Road safety
Do not use your phone when driving. In order to give your full attention to driving, stop and park safely before making a call.
You must comply with any current legislation.
Distance of operation
This phone model has been tested and meets radiofrequency exposure guidelines when used as follows:
- against the ear: make or receive a phone call and hold the phone as you would a wireline telephone,
- body worn: when transmitting, place the phone in a carry accessory that contains no metal and positions the phone a
minimum of 1.5 cm from your body. Use of other accessories may not ensure compliance with radiofrequency exposure
guidelines. If you do not use a body worn accessory and are not holding the phone at the ear, position the phone a
minimum of 1.5 cm from your body,
- data operation: when using a data feature, position the phone a minimum of 1.5 cm from your body for the whole duration
of the data transmission.
Using the music player
This product has been designed to comply with prevailing legislation regarding the limitation of maximum audio
volume levels.
- Prolonged listening at high volume with a headset or earphones can damage your hearing.
- If you experience ringing in your ears, reduce the volume or stop using the product.
- Only use the headset or earphones supplied with the product or else use compatible accessories. The list of
compatible accessories can be consulted on our Web site: http://www.sagem.com.
Environment
Packaging
To facilitate the recycling of packaging materials, please comply with the selective waste sorting rules instituted locally for this
type of waste.
Batteries
Spent batteries must be deposited at the designated collection points.
The product
The crossed-out waste bin mark affixed to the product (including its accessories) means that it belongs to the family
of electrical and electronic equipment.
To promote the recycling and recovery of waste electrical and electronic equipment (WEEE) and at the same time
safeguard the environment, European regulations require you to comply with the sorting rules instituted locally for
this type of waste.
Certification and safety information for Europe and countries using CE standards
55
User guide Roxy FCC_agreement.book Page 56 Mardi, 26. août 2008 3:19 15
End User Licence Agreement (EULA), for the
software
CONTEXT AND ACCEPTANCE OF THE AGREEMENT
You have acquired a Mobile Phone device ("DEVICE"), manufactured by Sagem Mobiles (MANUFACTURER), that includes
software either developed by the manufacturer itself or licensed third party Software suppliers ("SOFTWARE COMPANIES")
to the manufacturer with the rights to sub-license it to the purchaser of the device. These installed software products,
regardless of their company of origin, and whether the name of the company of origin is indicated or not in the DEVICE
documentation, as well as associated media, printed materials, and "online" or electronic documentation ("SOFTWARE") are
protected by international intellectual property laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved.
IF YOU DO NOT AGREE WITH THIS END USER LICENCE AGREEMENT ("EULA"), DO NOT USE THE DEVICE OR COPY
THE SOFTWARE. INSTEAD, PROMPTLY CONTACT THE MANUFACTURER FOR INSTRUCTIONS ON RETURN OF THE
UNUSED DEVICE(S) FOR A REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE
DEVICE, WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT).
SOFTWARE includes software already installed on the DEVICE ("DEVICE Software") and Software contained on the
CD-ROM disk ("Companion CD"), if any is supplied with the product.
GRANTING OF SOFTWARE LICENCE RIGHTS
This EULA grants you the following licence:
DEVICE Software. You may use the DEVICE Software as installed on the DEVICE. All or certain portions of the DEVICE
Software may be inoperable if you do not have and maintain a service account with an appropriate Mobile Operator, or if the
Mobile Operator's network facilities are not operating or configured to operate with the DEVICE software.
COMPANION CD. If any is supplied, additional software for your personal computer is included with your DEVICE. You may
install and use the software component(s) contained in the Companion CD only in accordance with the terms of the printed
or online end user licence agreement(s) provided with such component(s). In the absence of an end user licence agreement
for particular component(s) of the Companion CD, you may install and use only one (1) copy of such component(s) on the
DEVICE or a single computer with which you use the DEVICE.
Security Updates. The SOFTWARE may include digital rights management technology. If SOFTWARE does contain digital
rights management technology, content providers are using the digital rights management technology ("DRM") contained in
the SOFTWARE to protect the integrity of their content ("Secure Content") so that their intellectual property, including
copyright, in such content is not misappropriated. Owners of such Secure Content ("Secure Content Owners") may, from
time to time, request manufacturers or SOFTWARE SUPPLIERS to provide security related updates to the DRM components
of the SOFTWARE ("Security Updates") that may affect your ability to copy, display and/or play Secure Content through the
SOFTWARE or third party applications that utilise the DRM.
56
End User Licence Agreement (EULA), for the software
User guide Roxy FCC_agreement.book Page 57 Mardi, 26. août 2008 3:19 15
You therefore agree that, if you elect to download a licence from the Internet which enables your use of Secure Content,
Suppliers may, in conjunction with such licence, also download onto your DEVICE such Security Updates that a Secure
Content Owner has requested that SOFTWARE SUPPLIERS distribute. The manufacturer and SOFTWARE SUPPLIERS will
not retrieve any personally identifiable information, or any other information, from your DEVICE by downloading such Security
Updates.
DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS
COPYRIGHT. All title and intellectual property rights in and to the SOFTWARE (including but not limited to any images,
photographs, animations, video, audio, music, text and "applets," incorporated into the SOFTWARE), the accompanying
printed materials, and any copies of the SOFTWARE, are owned by the manufacturer or the SOFTWARE SUPPLIERS. You
may not copy the printed materials accompanying the SOFTWARE. All title and intellectual property rights in and to the
content which may be accessed through use of the SOFTWARE is the property of the respective content owner and may be
protected by applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such
content. All rights not specifically granted under this EULA are reserved by the manufacturer and the SOFTWARE
SUPPLIERS.
Limitations on Reverse Engineering, Decompilation and Disassembly. You may not reverse engineer, decompile, or
disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law
notwithstanding this limitation.
Single DEVICE. The DEVICE Software is licensed with the DEVICE as a single integrated product. The DEVICE Software
installed in the memory of the DEVICE may only be used as part of the DEVICE.
Single EULA. The package for the DEVICE may contain multiple versions of this EULA, such as multiple translations and/or
multiple media versions (e.g., in the user documentation and in the software). Even if you receive multiple versions of the
EULA, you are licensed to use only one (1) copy of the DEVICE Software.
Software Transfer. You may not permanently transfer any of your rights under this EULA with regard to the DEVICE
Software or Companion CD, except as permitted by the applicable Mobile Operator. In the event that the Mobile Operator
permits such transfer, you may permanently transfer all of your rights under this EULA only as part of a sale or transfer of the
DEVICE, provided you retain no copies, you transfer all of the SOFTWARE (including all component parts, the media and
printed materials, any upgrades, this EULA and, if applicable, the Certificate(s) of Authenticity), and the recipient agrees to
the terms of this EULA. If the SOFTWARE is an upgrade, any transfer must include all prior versions of the SOFTWARE.
Software Rental. You may not rent or lease the SOFTWARE.
Speech/Handwriting Recognition. If the SOFTWARE includes speech and/or handwriting recognition component(s), you
should understand that speech and handwriting recognition are inherently statistical processes; that recognition errors are
inherent in the processes; and that errors can occur in the component's recognition of your handwriting or speech, and the
final conversion into text. Neither the manufacturer nor its suppliers shall be liable for any damages arising out of errors in the
speech and handwriting recognition processes.
End User Licence Agreement (EULA), for the software
57
User guide Roxy FCC_agreement.book Page 58 Mardi, 26. août 2008 3:19 15
NOTICE REGARDING THE MPEG-4 VISUAL STANDARD. The SOFTWARE may include MPEG-4 visual decoding
technology. MPEG LA, L.L.C. requires the following notice:
USE OF THIS SOFTWARE IN ANY MANNER THAT COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED,
EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR INFORMATION (i) GENERATED BY AND OBTAINED
WITHOUT CHARGE FROM A CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE, AND (ii) FOR
PERSONAL USE ONLY; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA, L.L.C.
If you have questions regarding this Notice, please contact MPEG LA, L.L.C., 250 Steele Street, Suite 300, Denver, Colorado
80206; Telephone 303 331.1880; FAX 303 331.1879
Termination. Without prejudice to any other rights, the manufacturer may terminate this EULA if you fail to comply with the
terms and conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE and all of its component
parts.
Consent to Use of Data. You agree that SOFTWARE SUPPLIERS may collect and use technical information gathered in
any manner as part of product support services related to the SOFTWARE. SOFTWARE SUPPLIERS may use this
information solely to improve their products or to provide customised services or technologies to you. SOFTWARE
SUPPLIERS may disclose this information to others, but not in a form that personally identifies you.
Internet Gaming/Update Features. If the SOFTWARE provides, and you choose to utilise, the Internet gaming or update
features within the SOFTWARE, it is necessary to use certain computer system, hardware, and software information to
implement the features. By using these features, you explicitly authorise SOFTWARE SUPPLIERS to use this information
solely to improve their products or to provide customised services or technologies to you. SOFTWARE SUPPLIERS may
disclose this information to others, but not in a form that personally identifies you.
Internet-Based Services Components. The SOFTWARE may contain components that enable and facilitate the use of
certain Internet-based services. You acknowledge and agree that SOFTWARE SUPPLIERS may automatically check the
version of the SOFTWARE and/or its components that you are utilising and may provide upgrades or supplements to the
SOFTWARE that may be automatically downloaded to your Device.
Links to Third Party Sites. The SOFTWARE may provide you with the ability to link to third party sites through the use of
the SOFTWARE. The third party sites are not under the control of the manufacturer. Neither the manufacturer nor its affiliates
are responsible for (i) the contents of any third party sites, any links contained in third party sites, or any changes or updates
to third party sites, or (ii) webcasting or any other form of transmission received from any third party sites. If the SOFTWARE
provides links to third party sites, those links are provided to you only as a convenience, and the inclusion of any link does
not imply an endorsement of the third party site by the manufacturer or its affiliates.
Additional Software/Services. The SOFTWARE may permit the manufacturer to provide or make available to you
SOFTWARE updates, supplements, add-on components, or Internet-based services components of the SOFTWARE after
the date you obtain your initial copy of the SOFTWARE ("Supplemental Components").
If the manufacturer provides or makes available to you Supplemental Components and no other EULA terms are provided
along with the Supplemental Components, then the terms of this EULA shall apply.
58
End User Licence Agreement (EULA), for the software
User guide Roxy FCC_agreement.book Page 59 Mardi, 26. août 2008 3:19 15
The manufacturer reserves the right to discontinue any Internet-based services provided to you or made available to you
through the use of the SOFTWARE.
EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is subject to U.S. export jurisdiction. You agree to comply
with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration
Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other governments.
UPGRADES AND RECOVERY MEDIA
- DEVICE Software. If the DEVICE Software is provided by the manufacturer separate from the DEVICE on media such
as a ROM chip, CD ROM disk(s) or via web download or other means, and is labelled "For Upgrade Purposes Only", you
may install one copy of such DEVICE Software onto the DEVICE as a replacement copy for the existing DEVICE Software
and use it in accordance with this EULA, including any additional EULA terms accompanying the upgrade DEVICE
Software.
- COMPANION CD. If any Companion CD component(s) is provided by the manufacturer separate from the DEVICE on
CD ROM disk(s) or via web download or other means, and labelled "For Upgrade Purposes Only" , you may (i) install and
use one copy of such component(s) on the computer(s) you use to exchange data with the DEVICE as a replacement copy
for the existing Companion CD component(s).
RESPONSIBILITIES
SUPPORT AND INFORMATION Should you have any questions concerning this EULA, or if you desire to contact the
manufacturer for any other reason, please refer to the address provided in the documentation for the DEVICE.
NO LIABILITY FOR CERTAIN DAMAGES. EXCEPT AS PROHIBITED BY LAW, THE MANUFACTURER SHALL HAVE NO
LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF
ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE.
FOR APPLICABLE LIMITED WARRANTIES AND SPECIAL PROVISIONS PERTAINING TO YOUR PARTICULAR
JURISDICTION, PLEASE REFER TO YOUR WARRANTY BOOKLET INCLUDED WITH THIS PACKAGE OR PROVIDED
WITH THE SOFTWARE PRINTED MATERIALS.
End User Licence Agreement (EULA), for the software
59
User guide Roxy FCC_agreement.book Page 60 Mardi, 26. août 2008 3:19 15
Java™
When running a Java™ application, you may be prompted to grant access to protected features. These features are protected
because using them could incur a cost, or involve your personal data. In case of doubt, don't hesitate to refuse access by
selecting the "No" button!
The security configuration menu is an expert feature! You must know exactly what you are doing before attempting to change
the security parameters of a MIDlet. Misunderstanding changes may render MIDlet non functional and/or lead to higher risks
for your private data or impact your airtime consumption. Any changes in the security configuration are done under your
responsibility. In no case shall the manufacturer and/or your network provider be liable for any damages deriving from or
arising out of such changes in the security configuration.
You must be aware that applications downloaded to your phone could cause the phone to perform actions for which you will
be billed, such as making calls and sending SMS. Depending on your operator's billing policy, you may also be charged to
download the application because of airtime consumption.
Security considerations
Java™ MIDP technology is an efficient way to provide powerful applications in mobile phones.
All these MIDP 2.0 features cannot be displayed on MIDlet installed in the handset: an advanced access control system is
implemented in the device to protect your private data and airtime consumption.
Access controls are collected in 9 security groups:
- Network access
- Auto invocation
- Phone call
- Local connectivity
- Messaging receive
- Messaging sending
- Read User data
- Write User data
- Multimedia recording
Each of these security groups has one of 5 possible authorizations levels (listed from the more restrictive to the more
permissive):
- Never: The security group completely prevents access to the protected features.
- Per use: Each time MIDlet tries to use protected feature, user is prompted to grant access.
- Per session: First time a MIDlet uses a protected function, user is prompted to grant access like in "Per use" authorization
but access is granted until the MIDlet terminates.
60
Java™
User guide Roxy FCC_agreement.book Page 61 Mardi, 26. août 2008 3:19 15
- Single confirmation: The first time in the whole MIDlet life a MIDlet uses a protected feature, user is prompted to grant
access. It remains valid until the MIDlet is removed from the handset.
- Always: The security group unconditionally grants access to protected features.
A MIDlet has a security status which is either "uncertified", or else "certified".
An "uncertified" status means that the source of the MIDlet could not be verified by the mobile phone at installation time. As
far as the phone knows, the MIDlet could have been written by anyone.
A "certified" status means that the MIDlet was digitally signed by a known party, whose name is displayed by the mobile
phone.
Security permissions are different for "uncertified" or "certified" MIDlets.
Security configuration menu
When a MIDlet is installed in the mobile phone, default security authorizations are applied.
This default security configuration may be altered through the "Settings/Security" menu of an installed MIDlet.
Once in the "Security" menu, the security status of the MIDlet is displayed.
If you do not want to enter the security menu, simply select the "Back" button. You can proceed by selecting "OK" button.
The menu displayed allows you to increase or decrease the permissions currently applied to the current MIDlet for each of
the security groups.
When you set a more permissive authorization to a security group than the current value, the mobile phone asks you to
confirm your increased risk exposure.
The maximum risk exposure increase is limited by the security status.
What is Java™?
Business applications and games are easily downloadable by the end-user on a Java™ featured handset.
Your mobile phone is a MIDP 2.0 compliant Java™ platform which implements WMA (SMS support) and MMAPI (Multimedia
support) options, providing an exciting environment to run highly graphical, networked and intuitive MIDP applications.
What is a MIDlet?
A Java™ application or a game designed to run in a mobile phone is named a MIDlet (MIDP applet).
A MIDlet is usually made up of 2 files:
- The JAD file
- The JAR file
JAD file stands for Java™ Application Descriptor. It is a small file describing the content of a JAR file.
JAR file stands for Java™ Archive. It refers to the application data themselves (program, images, sound). A JAR file can have
a size of up to 200 KB.
Note: In rare circumstances, MIDlet vendors may provide no JAD file and the MIDlet is just the JAR file. In such a case it is
your sole responsibility to assess the risk of downloading the JAR file without any possibility of consulting the JAD file.
Java™
61
User guide Roxy FCC_agreement.book Page 62 Mardi, 26. août 2008 3:19 15
Downloading a MIDlet (Java™ game or application)
MIDlets are easily downloaded to the mobile phone through the Games or Applications menus or through the WAP browser.
In almost all cases, you will first receive a JAD file which will be displayed on the screen.
When you select a JAD file, your mobile phone downloads it, displays the data contained and prompts you to acknowledge
the JAR file download.
The popup displays information below:
- Name of the MIDlet, Version, Size, Name, Security status, URL.
If you do not want to download the main data (JAR file), you can refuse to acknowledge further airtime consumption by
selecting "Cancel".
If you agree on the MIDlet installation, just select OK. The MIDlet is installed with security levels set to the default values
associated with its security status.
Before downloading an application, a message similar to this one may be displayed: "Your handset cannot identify the
application, please be sure of the source of the application before installing the application".
Trademarks
Java™ and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and
other countries.
Disclaimer
Some downloaded items may contain data or may induce actions which may cause malfunctioning of your mobile phone or
loss or corruption of data or abnormal increase of your airtime consumption.
You expressly acknowledge that the download of any applications including Java™ applications or games is done under your
exclusive responsibility. In no event shall the manufacturer, your network service provider or their affiliates be liable for any
lost profits or costs of procurement of substitute goods or services, loss of profits, interruptions of business, loss of data or for
any special, indirect, incidental, economic, or consequential damages arising under contract, tort, negligence, or other theory
of liability relating to the download of any application by any means, including Java™ applications or games in Sagem
Mobiles devices. You expressly acknowledge that any applications including Java™ applications or games are provided
strictly "as is". The manufacturer and/or your network service provider extend no warranty whatsoever thereto. The
manufacturer and/or your network service provider disclaim any express, implied or statutory warranty of merchantability,
fitness of any applications including Java™ applications or games for a specific purpose, satisfactory quality, security or
otherwise.
62
Java™
User guide Roxy FCC_agreement.book Page 63 Mardi, 26. août 2008 3:19 15
Warranty
You must always use your phone for the purpose for which it was designed, under normal operating conditions. The
manufacturer declines all responsibility for any use outside of the scope of its designed purpose and for any consequences
of this use.
The software program developed by the manufacturer remains the exclusive property of Sagem Mobiles. It is therefore highly
prohibited to modify, translate, de-compile or disassemble this software program or any part thereof.
Usage precautions
Your phone allows you to download ring tones, icons and animated screensavers. Some of these items may contain data that
may cause malfunctions of your phone or data losses (virus for example).
For this reason, the manufacturer rejects all responsibility concerning (1) the reception of downloaded data or losses of the
said data, (2) the impact on the operation of the phone and (3) damages resulting from receiving the said downloaded data
or loss of said data. In addition, the manufacturer states that a failure caused by receiving downloaded data that do not comply
with the specifications set by the manufacturer is excluded from the warranty. Consequently, the diagnosis and repair of a
phone infected by the said downloaded data will be at the expense of the customer.
Any content that you download to your phone may be protected by copyright belonging to third parties and consequently you
may not have the right to use this content or its use may be restricted. Consequently it is up to you to ensure that you have
permission, such as under the terms of a licence agreement, to use any content that you download. Furthermore, the
manufacturer does not guarantee the accuracy or the quality of any content that you download. You alone are responsible
for the content that you download to your mobile phone and how you use it. The manufacturer cannot be held responsible for
this content or for its use.
It is your responsibility to ensure compliance, at your own expense, with the laws and regulations applicable in the country
where you use your phone.
Warranty conditions
Whenever you wish to make use of the warranty, please contact your vendor and present the purchasing paperwork obtained
from the vendor.
If a fault occurs, the vendor will indicate what action is to be taken.
1.
The new phone (excluding consumables), including new accessories bundled with the phone, are guaranteed by the
manufacturer, parts and labour (apart from travel) against any manufacturing fault for a period of twelve (12) months with
effect from the sale of the phone to the customer, on presentation of the paperwork indicating the purchase date of the phone.
Note: If the phone is supplied with a warranty card, the period of the warranty applicable is the period indicated on the
warranty card.
Warranty
63
User guide Roxy FCC_agreement.book Page 64 Mardi, 26. août 2008 3:19 15
Phones that have been repaired or replaced as standard during the warranty period stated above are guaranteed (parts and
labour) until the later of these two dates:
Expiry of the guarantee period of twelve (12) months stated above or three (3) months with effect from the date of support
provided by the manufacturer.
Your legal rights under the terms of applicable national law as well as your rights in relation to your retailer, as set out in the
sales contract, remain applicable and are in no way affected by this guarantee.
In any disputes, the phone is covered by the legal warranty against the consequences of faults or hidden defects.
2.
All faulty phones under warranty will be replaced or repaired free of charge at the manufacturer's option (with the exclusion
of repair of any other damage), once it has been specified that the work required for the application of the warranty will be
done in a workshop and that the return costs (transport and insurance) of the phone to the address to be indicated by the
manufacturer after-sales service, whose phone number is shown on the delivery note, will be charged to the customer.
Subject to essential legal provisions, the manufacturer does not accept any warranty, explicit or implicit, other than the
warranty provided expressly in this chapter, nor shall the manufacturer accept responsibility for any immaterial and/or indirect
damages (such as loss of orders, loss of profit or any other financial or commercial damage) under the warranty or not.
3.
The acceptance of a phone under warranty requires a purchase document that is legible and with no modifications, stating
vendor's name and address, date and place of purchase, type of phone and IMEI, be attached to the warranty, and that the
information on the phone identification label is legible and that this label or any other seal has not been tampered with.
The warranty applies in normal conditions of use.
Prior to sending the phone for repair, it is the customer's responsibility to backup at his expense the customized data stored
in the phone (phonebook, settings, wallpapers). A list of backup facilities can be provided by the manufacturer on request.
The responsibility of the manufacturer cannot be invoked if damage occurs to customer files, programs or data. The
information or operating elements and the contents of files will not be re-installed in any case in the event of loss.
The manufacturer may decide, at its option, to repair the phone with new or reconditioned parts, replace the phone with a new
phone or, in any dispute, a phone in good working condition. During its work the manufacturer reserves the facility to make,
where necessary, any technical modifications to the phone where these modifications do not adversely affect its initial
purpose.
Faulty parts to be replaced during a repair under warranty will become the property of the manufacturer.
The phone repair and standstill time during the warranty period may not lead to an extension of the warranty period as stated
in article 1 above, provided no other vital provisions have been agreed.
The application of the warranty is subject to the full payment of the sums due for the phone when the request for support is
made.
64
Warranty
User guide Roxy FCC_agreement.book Page 65 Mardi, 26. août 2008 3:19 15
4.
The following are excluded from the warranty:
Breakdowns or malfunctions due to non-compliance with the installation and usage instructions, to an external cause of the
phone (shock, lightning, fire, vandalism, malice, water damage of any type, contact with various liquids or any harmful agent,
unsuitable electric current, etc), to modifications of the phone made without the written consent of the manufacturer, to a
servicing fault, as described in the documentation supplied with the phone, to lack of supervision or care, to poor
environmental conditions of the phone (especially temperature and hygrometry, effects of variations in electric voltage,
interference from the mains network or earth) or even due to a repair, a call-out (opening or attempt to open the phone) or to
servicing done by personnel not approved by the manufacturer.
Damage resulting from inadequate packaging and/or poor packing of the phone sent back to the manufacturer.
Normal wear and tear of the phone and accessories.
Communication problems linked with a poor environment, especially:
Problems accessing and/or logging onto the Internet, such as failures in the access network, the failure of the subscriber's or
correspondent's line, transmission fault (poor geographic coverage by radio transmitters, interference, disturbance, failure or
poor quality of phone lines, etc.), a fault inherent in the local network (cabling, file server, user phone) and/or transmission
network fault (interference, disturbance, failure or poor quality of the network, etc).
Change of parameters of the cellular network made after the phone was sold.
Supply of new software versions.
Current servicing work: delivery of consumables, installation or replacement of these consumables, etc.
Call-outs for phone or software modified or added without the written consent of the manufacturer.
Faults or disruptions resulting from the use of products or accessories not compatible with the phone.
Phones returned to the manufacturer that do not comply with the return procedure specific to the phone cove-red by this
warranty.
The opening or closing of a SIM operator key and call-outs resulting in the non-operation of the phone resulting from the
opening or closing of the SIM operator key done without the agreement of the original operator.
5.
In the cases of warranty exclusion and of expiry of the warranty period, the manufacturer shall draw up an estimate to be
given to the customer for acceptance before any call-out. The repair and carriage costs (there and back) given in the accepted
estimate will be charged to the customer.
These provisions are valid unless a special written agreement has been made with the customer. If one of the provisions turns
out to infringe a legally essential rule protecting consumers under their national legislation, this provision shall not apply, but
all other provisions shall remain valid.
Warranty
65
User guide Roxy FCC_agreement.book Page 66 Mardi, 26. août 2008 3:19 15
Troubleshooting
The phone won’t start and/or won’t take a charge
The battery has completely lost its charge.
Connect the phone to the charger for between 5 and 30 minutes. The phone will only switch on after it has been charging for
a few minutes.
You may use the phone again when the Start option is displayed on the screen.
If the phone still won't start after 30 minutes’ charging, contact customer service.
SIM not present
Check if the SIM card is present and properly positioned / inserted.
Check the condition of the SIM card. If damaged, please go back to the operator's shop for advice. Contact your after-sales
service if the message persists.
Incorrect PIN code
An incorrect PIN code has been entered. Be careful! Three incorrect PIN codes will block the SIM Card.
PIN BLOCKED
If a wrong PIN number is entered three times in succession, your SIM card is blocked. You must then:
- Enter the PUK (Personal Unblocking Key) code provided by your operator, and validate.
- Enter your PIN number and validate.
- Enter your PIN number again and validate.
After 5 or 10 failed attempts (depending on the type of SIM card), the SIM card is definitely locked. You must then contact
your operator to obtain a new card.
SIM LOCKED
In certain cases, the handset can only be used with some types of SIM cards. This message means that the SIM card you
are using does not fit with the phone. Take the SIM card out, and switch it back on. If the message SIM not present appears
on the screen, you will need to check its compatibility next to the place where you bought it. If not, please contact your
after-sales service.
66
Troubleshooting
User guide Roxy FCC_agreement.book Page 67 Mardi, 26. août 2008 3:19 15
No call connection
Check that the number you have dialled is correct. Check the presence of at least one white circle of the network signal
reception level indicator.
If the letter E is displayed on the top right corner of the screen, without any network name displayed, only emergency services
can be called.
Check the status of your credit.
Check that the SIM Card you are using offers the service you are requesting; check if its validity has not expired.
Check and deactivate the outgoing calls restriction when necessary.
The network could be saturated. Try later.
If the problem persists, please contact your Technical Helpdesk.
No receiving calls
Try to make a call in order to check that the phone and the network are operational.
Check and deactivate the permanent call forwarding (permanent call forwarding icon displayed on the screen).
Check and deactivate the incoming calls restriction when necessary.
If the problem persists, please contact your Technical Helpdesk.
Quality reception when calling
Avoid placing your fingers at the bottom of the phone, where the aerial is integrated: the phone will have to use full strength
to establish a quality transmission.
Cannot send message
Check that the message centre number is correctly entered.
To do so, please select Messaging/Settings then the SMS settings tab/Message center and check the number entered.
Please contact your network provider to get this number.
No voicemail
Check that your subscription does offer this service.
Program the call to be forwarded to voicemail using the information provided by the operator.
Operator name does not appear on screen
Select the Settings menu, then Connectivity/Networks/Search/Manual. Wait until the operator appears, select it and
validate.
If the Operator logo menu is present (depending on model), activate the display (Settings/Display/Operator logo).
Troubleshooting
67
User guide Roxy FCC_agreement.book Page 68 Mardi, 26. août 2008 3:19 15
Customer care
Austria
Belgium
Croatia
Czech Republic
France
Germany
Greece
Hungary
Ireland
Italy
Morocco
Netherlands
Poland
Romania
Russia
South Africa
Spain
Switzerland
United Kingdom
01 36 02 77 16 64
02 62 77 016
0800 222 722
296335686
0 892 701 799 (0.34 €/mn)
01805 843 850
00800 44 14 20 38
06 1 7774 839
0 160 58 355
800 800 485
0810 800 10
020 65 45 724
0801 801 101
0800 89 45 21
495 258 54 33
011 369 7870
91 375 3376
02 25 67 53 99
0870 24 05 613
Customer Care e-mail address:
support.mobiles@sagem.com
Web sites:
www.sagem.com/mobiles
www.planetsagem.com
www.sagem-online.com
68
User guide Roxy FCC_agreement.book Page 69 Mardi, 26. août 2008 3:19 15
Index
Activating your phone
Allowed numbers
Backlight
Battery
Charging the battery
Installing the battery
Bluetooth®
Browser
Downloading objects
Calculator
Call history
Call settings
Calls
Any key
Auto response
Automatic redial
Blacklist
Call barring
Call divert
Call waiting
Display numbers
Camera
Clock
Alarm
Stop Watch
Timer
Confidentiality
Contact
Contacts
Call group
Index
20
39
10
27, 33, 40, 41
32
32
42
15
16
16
16
17
17
17
16
17
16
29
41
41
41
38
18, 29
12, 33
20
Copy
Converter
Customer care
Date / Time
Downloaded objects
Drafts
email
Games
Getting started
Hands-free mode
Icon
Idle screen
Inbox
Input modes
Keypad lock
Languages
Local information
Memory
Messaging
Inbox
19
42
68
36
30
24
19
31
12
14
24
23
36
37
42
39
24
69
User guide Roxy FCC_agreement.book Page 70 Mardi, 26. août 2008 3:19 15
Receiving messages
MMS
Multimedia
Multimedia objects
Music files
Network
Networks settings
Organiser
Phone code
Phonebook
New contact
Using the phonebook
Photo
Picture
PIN code
PIN2 number
Security
SIM card
SMS
Sound
Startup animation
T9
Templates
ToDo
Troubleshooting
USB
USB cable
USB mode
70
24
29, 30
30
30
26
13
35
vCard
Video
Video call
Voicemail
Wallpaper
Warranty
19
30, 33
15
25
39
63
33
38
18
18
6, 29, 33
33
37
37
37
8, 9
22
33
39
23
25
33, 41
66
40, 41
33
34
Index

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 70
Creation Date                   : 2008:08:26 15:11:56Z
Mod Date                        : 2008:08:26 15:18:20Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : g070208
Create Date                     : 2008:08:26 15:11:56Z
Modify Date                     : 2008:08:26 15:18:20Z
Metadata Date                   : 2008:08:26 15:18:20Z
Creator                         : g070208
Title                           : User guide Roxy FCC_agreement.book
Page Mode                       : UseOutlines
Tagged PDF                      : Yes

EXIF Metadata provided by EXIF.tools