Sagem Wireless MYX62A GSM 850/1800/1900 Mobile Phone with BT User Manual 252338173 myX6 2a en

Sagem Wireless GSM 850/1800/1900 Mobile Phone with BT 252338173 myX6 2a en

UserManual.wiki >

Sagem Wireless >

MYX62A User Manual HTML Version

User Guide

ENGLISH

252338173_myX6-2a_en.book Page 1 Lundi, 10. octobre 2005 3:58 15

You have just purchased a SAGEM phone, we congratulate you; it is recommended that you read this handbook carefully in

order to use your phone efficiently and in the best conditions.

Your phone can be used internationally in the various networks (GSM 850 MHz and DCS 1800 MHz or PCS 1900 MHz)

depending on the roaming arrangements with your operator.

We remind you that this phone is approved to meet European standards.

WARNING

Depending on the model, network configuration and associated subscription cards, certain functions may not be available.

Ensure that your SIM card is a 3 V SIM type that is compatible with your phone. Inserting an incompatible card will be indicated

by a message when your phone is switched on. Contact your operator.

Your phone is identified by its IMEI number. Write this number down, and do not keep it with your phone, because you may

be asked for it in the event of your phone being stolen, in order to prevent it from being used, even with a different SIM card.

In order to display the IMEI on your phone's screen, type: *#06#.

Technical features

Weight: 104 g

Size: 110 x 47 x 19 mm

Original battery: Li-ion 920 mAh

Multimedia objects supported:

Audio formats: iMelody, Midi, wave, MP3, AAC, AAC+, AMR

Graphic formats: wbmp, bmp, png, gif, gif animés, jpeg, 3gp, mpeg4 depending on model

Size of memory available for messages:

100 SMS

Size of memory available for MMS, the phonenook and the multimedia objects: up to 8 Mb

Maximum size of each message:

SMS: < 160 characters

MMS: < 100 Kb for outgoing messagezs, 300 Kb for incoming messages (depends on the phone configuration and on

the operator reservations)

Using temperature: from - 10 °C to + 55 °C

252338173_myX6-2a_en.book Page 2 Lundi, 10. octobre 2005 3:58 15

Conformance Document 3

Conformance Document

252338173_myX6-2a_en.book Page 3 Lundi, 10. octobre 2005 3:58 15

4Safety Information for Wireless handled phones

Safety Information for Wireless handled phones

Use of your phone is subject to safety rules designed to protect the user and his or her environment.

Exposure to Radio Frequency Signals

-Your wireless handheld portable phone is a low power radio transmitter and receiver. When it is ON, it receives and also

sends out frequency (RF) signals.

-In August, 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for

handheld wireless phones. Those guidelines are consistent with the safety standards previously set by both U.S. and

international standards bodies:

ANSI C95.1 (1992) (*)

NCPR Report 86 (1986) (*)

ICNIRP (1996) (*).

-Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For example,

over 120 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the

available body of research to develop the ANSI Standard (C95.1).

-The design of your phone complies with the FCC guidelines (and those standards).

-For body worn operation, this phone has been tested and meets FCC RF exposure guidelines when used with an

accessory that contains no metal and that positions the handset a minimum of 1.5 cm from the body.

Use of other accessories may not ensure compliance with FCC RF exposure guidelines.

Phone Operation

-Normal position: hold the phone as you would any other phone with the upper zone (back of the LCD display) pointed up

and over your shoulder.

-Tips on efficient operation: for your phone to operate most efficiently: do not touch cover unnecessarily the top part of the

phone with your hand. This would cover the integrated antenna and affect call quality and may cause the phone to operate

at a higher power level than otherwise needed.

(*) American National Standards Institute; National Council on Radiation Protection and Measurements; International

Commission and Non-Ionizing Radiation Protection.

252338173_myX6-2a_en.book Page 4 Lundi, 10. octobre 2005 3:58 15

Safety Information for Wireless handled phones 5

Driving

-Check the laws and regulations on the use of wireless phones in the areas where you drive. Always obey them. Also, if

using your phone while driving while driving please:

•Give full attention of driving, driving safely is your first responsibility

•Use hands-free operation, if available

•Pull off the road and park before making or answering a call if driving conditions so require.

Electronic Devices

-Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be

shielded against the RF signals from your wireless phone.

-Some phone accessories allow to reduce the radiation interferences of the phone. Please contact your distributor.

Pacemakers

The Health Industry Manufacturers Association recommends that a minimum separation of six (6”) inches be maintained

between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These

recommendations are consistent with the independent research by and recommendations of Wireless Technology Research.

Persons with pacemakers:

-Should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON

-Should not carry the phone in the breast pocket

-Should use the ear opposite to the pacemaker to minimize the potential for interference

-If you have any reason to suspect that interference is taking place, turn your phone OFF immediately.

Hearing Aids

Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult

your service provider.

Other Medical Devices

If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately

shielded from external RF energy. Your physician may be able to assist you in obtaining this information.

Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so.

Hospitals or health care facilities may be using equipment that could be sensitive to sensitive external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the

manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that

has been added to your vehicle.

Posted Facilities

Turn your phone OFF in any facility where posted notices so require.

252338173_myX6-2a_en.book Page 5 Lundi, 10. octobre 2005 3:58 15

6Safety Information for Wireless handled phones

Aircraft

FCC regulations prohibit using your phone while in the air. Switch OFF your phone before boarding an aircraft.

Blasting Areas

To avoid any interfering with blasting operations, turn your phone OFF when in a “blasting area” or in areas posted: “Turn off

two-way radio”. Obey all signs and instructions.

Potentially Explosive Atmospheres

-Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks

in such areas could cause an explosion or fire resulting in bodily injury or even death.

-Areas with a potentially explosive atmosphere are often but not always clearly marked. They include fueling areas such as

gasoline stations; below deck on boats, fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum

gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust, or metal

powders; and any other area where you would normally be advised to turn off your vehicle engine.

For Vehicles equipped with Air Bag

An air bag inflates with great force. DO NOT place objects, including both installed or portable wireless equipment, in the area

over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag

inflates, serious injury could result.

Electrical Safety

-Only us the appropriate chargers recommended in the manufacturer’s catalog. Using another charger may prove

dangerous and could invalidate the warranty of your phone.

-The main power socket should be easily accessible.

-Make sure that the main voltage corresponds to the level marked on the charger identification plate.

General Precautions

-Do not try to open your phone and repair it yourself. The manufacturer cannot be held liable for any resulting damage.

-Any work done by an unqualified and unauthorized person will invalidate your warranty.

-Do not use your phone in humid places (bathroom, swimming pool, etc.). Protect it from splashing water and other liquids.

-Do not expose your phone to extreme temperatures.

-Keep your phone out of reach of small children. Do not allow them to play with it, it is not a toy.

-Only use your phone with original accessories. Failure to comply with these rules will invalidate your warranty.

-Remember to disconnect the charger before removing the battery.

-The physical and chemical processes used in rechargeable batteries mean that temperature limits must be followed during

rapid charging. Your phone automatically protects the batteries from extreme temperatures.

-If the phone is disconnected from the battery for an extended period of time, it will lose the time and the recorded voice

messages.

252338173_myX6-2a_en.book Page 6 Lundi, 10. octobre 2005 3:58 15

Safety Information for Wireless handled phones 7

Emergency Calls

IMPORTANT

-This phone, like any PCS phone, operates using radio signals, PCS and landline networks, and user-programmed

functions. As a consequence a connection in all conditions cannot be guaranteed. Therefore you should never rely solely

upon any PCS phone for essential communications (e.g. medical emergencies).

-To make or receive any calls, this phone must be switched on and in service area with adequate PCS signal strength.

Emergency calls may not be possible on all PCS networks or when certain network services and/or phone features are in

use. Check with local Service Providers.

-When making an emergency call, remember to give all the necessary information as accurately as possible. Remember

that your PCS phone may be the only means of communication at the scene of an accident - do not terminate the call until

given permission to do so.

-If certain features are in use (such as Keyguard), you may first need to turn those features off before you can make an

emergency call. Consult this manual and your local PCS Service Provider.

Emergency Calling

-If the phone is not on, press .

-Key in emergency number for your present location (e.g. 911 or other official emergency number).

-Press .

-If you dial 911 during a call, the phone terminates the current call and attempts to make a call to the emergency

number 911.

FCC/INDUSTRY CANADA NOTICE

Your phone may cause TV or radio interference (e.g. when using phone in close proximity of receiving equipment). The

FCC/INDUSTRY Canada can require you to stop using your phone if such interference cannot be eliminated. If you need

assistance, contact your local dealer.

This device complies with parts 15 and 68 of the FCC rules. Operation is subject to the condition that this device does not

cause harmful interferences.

WARNING

-The manufacturer cannot be held liable for any failure to comply with the above recommendations or for any misuse.

-The software program developed by Sagem Communication remains the exclusive property of Sagem

Communication. It is therefore highly prohibited to modify, translate, decompile or disassemble this software program

or any part thereof.

-Sagem Communication may not be held responsible for the contents of messages, software or objects downloaded

and/or for any direct or indirect consequential damage to the phone itself.

252338173_myX6-2a_en.book Page 7 Lundi, 10. octobre 2005 3:58 15

8Your phone package - Accessories

Your phone package - Accessories

When you open the box, check that all items are present:

1 - Phone

2 - Charger

3 - Battery

4 - User guide

5 - Wellphone CD

Accessories

We advise you the use of SAGEM brand accessories for an optimal operating of your phone and of your accessories.

You can order the following accessories:

-Stereo pedestrian kit

-Bluetooth pedestrian kit

-Additional battery

-Additional charger

-USB cable (with associated drivers) and serial cable to connect your phone to a PC (*)

-Cigar lighter charger

For more information : www.planetsagem.com and www.sagem.com

(*)

Warning

: the USB cable equipped with a charge connector is an extra connector. If the battery has run down, we

advise you the use of the charger provided with the phone.

252338173_myX6-2a_en.book Page 8 Lundi, 10. octobre 2005 3:58 15

Description 9

Description

Zoom (in photo or video

preview screen)

Volume setting (in call)

Red key

: Hold down: Switch on/off. In a call context: Reject a call - hang up

In menus: Return to idle screen

Green key

: Long press: Activate/Deactivate hands-free mode : press again

this key to switch into hands-free mode

WARNING:

do not use the phone in hands-free mode near to your ear, or

you may suffer hearing loss.

In call context: Call - receiving a call

Right programmable key:

(Function available depending on model)

In idle screen: Access to certain functions (shortcuts)

In menus: Access to the selection shown on screen in the tab (*)

(*) In this manual, when a function is chosen by pressing on this key, square brackets

are used (e.g.: [

Save

]).

Left programmable key:

(Function available depending on model)

In idle screen: Access to certain functions (shortcuts)

In menus: Access to the selection shown on screen in the tab (*)

The navigator allows you:

-to navigate in the various functions pressing the relevant part (up, down,

right, left)

-to confirm your selection pressing the central part (

)

In idle screen, pressing the navigator displays the main menus icons

Pressing the navigator followed by one of the twelve keys of the keypad, you

can display a menu directly.

∗

When composing a message:

Short press: switches from one input mode

to another (T9, ABC, 123). Long press: upper case/lower case

Hold down: In idle screen: Silent mode. In call reception mode: Short press

stops ring tone. In ring tone setting mode: Activate / deactivate ring tone

Stops sound in video or message playing, or in a game

Photo taking key IrDA

(infrared)

2 to 9

A long press on the keys

directly displays the phonebook

252338173_myX6-2a_en.book Page 9 Lundi, 10. octobre 2005 3:58 15

10 Description

Installing the SIM card and the battery

WARNING

Depending on the model, network configuration and associated subscription cards, certain functions may not be available.

Ensure that your SIM card is a 3 V SIM type that is compatible with your phone. Inserting an incompatible card will be indicated

by a message when your phone is switched on. Contact your operator.

Your phone is identified by its IMEI number. Write this number down, and do not keep it with your phone, because you may

be asked for it in the event of your phone being stolen, in order to prevent it from being used, even with a different SIM card.

In order to display the IMEI on your phone's screen, type: *#06#.

The SIM card is inserted under the phone's battery. Ensure that the phone is

switched off and the charger disconnected.

1Turn the phone back and slide the lock button up to remove the back cover.

2Take out battery if already installed.

3Slide the SIM card, with cut corner as shown on the phone, into the card

holder with fold face down.

4Place the battery by positioning first the top of it, as shown on the battery.

5Replace the back cover, locking it first on the top part.

252338173_myX6-2a_en.book Page 10 Lundi, 10. octobre 2005 3:58 15

Description 11

Inserting the memory card

1Turn the phone back and slide the lock button up to remove the back cover.

2Remove first the back cover then the front cover, pushing on the two side clips.

3Insert the memory card pushing it until you hear a «clic».

4Turn the front cover back, replace the keyboard then put the electronic board inside. Replace the back cover.

5To remove the memory card, gently press it to make it come out.

Using the memory card

The memory card is very fragile. Take care when you insert or remove the memory card.

Some memory cards must be formatted with a PC before first use with the phone.

123

Charger and

accessories

connector

Memory card slot

252338173_myX6-2a_en.book Page 11 Lundi, 10. octobre 2005 3:58 15

12 Idle screen

Idle screen

The idle screen may contain the following information:

1 - The title bar icons:

Battery (if it flashes red, the battery must be charged immediately)

Silent mode (the ringtone is off)

Only emergency call is possible

Signal strength level (between 0 and 5 bars)

Message received (read your message), flashing: memory full (delete some messages)

Grey: GPRS unavailable

Black: GPRS connection

Flashing: GPRS connection on hand

WAP connection

2 - Date and time, in digital or analog mode

3 - Network provider

4 - Thumbnail centred on bottom line:

The main « Menu » thumbnail shows that the menus can be accessed by pressing the navigator. The following information

may also be displayed: « 1 message received » or « 1 call » (incoming call failed).

It can be deleted by pressing briefly.

252338173_myX6-2a_en.book Page 12 Lundi, 10. octobre 2005 3:58 15

Quick start 13

Quick start

Information on the SIM card

To use your phone, you need a card called SIM card. It contains personal

information that you can modify:

Secret codes (PIN(s): Personal Identification Numbers), these codes allow you

to protect access to your SIM card and phone

Phonebook

Messages

How special services work.

Your phone is compatible with the SIM 3V cards.

Getting started

When you switch on your phone for the first time, follow instructions displayed on the screen.

If access to the SIM card is protected, the device prompts you to enter the PIN number:

Enter the code

between 4 and 8 digits given to you when the SIM card was issued. These digits do not appear on the screen

for security reasons.

After pressing [

], the phone activates the SIM card settings and switches on again ; enter your PIN code again then the

date and time, make your choice for the following settings: time zone, daylight savings, skin, wallpaper, screensaver, ring

tone, volume, vibrate and voicemail number.

If there are contacts saved in your SIM card, you are invited, if you wish, to copy them in the phone contacts memory.

WARNING

This card must be handled and stored with care in order not to be damaged. If you should lose your SIM card, contact

your network provider immediately.

Please keep your SIM card out of reach of young children.

252338173_myX6-2a_en.book Page 13 Lundi, 10. octobre 2005 3:58 15

14 Quick start

Switching ON/OFF

When your phone is off, a short press on will turn it ON.

When the phone is ON, if your are browsing inside the menus, a short press on will come back to the idle screen. When

you are in the idle screen, a long press on will switch OFF the phone.

Network

From now on the phone hunts for a network on which it can make calls. If it finds one, it displays the name of the network on

the screen. You are then ready to send or receive a call.

Warning

If a wrong PIN number is entered three times in succession, your SIM card is blocked. You must then:

-Enter « **05* ».

-Enter the PUK (Personal Unblocking Key) code provided by your operator, and validate.

-Enter your PIN number and validate.

-Enter your PIN number again and validate.

After 5 or 10 failed attempts (depending on the type of SIM card), the SIM card is definitely locked. You must then

contact your operator to obtain a new card.

If the network’s name appears, calls are possible on your operator's network.

If the letter R and a network name are displayed, calls are possible on a roaming network provider.

If the letter E is displayed without any network name, only the emergency services are accessible (ambulance, police,

fire brigade).

If the network icon flashes, the phone is in permanent search mode. There is no network available. The signal strength

indicator received allows you to display the quality of reception. If it indicates less than three bars, search for better

reception in order to call in good conditions.

252338173_myX6-2a_en.book Page 14 Lundi, 10. octobre 2005 3:58 15

Quick start 15

First call

Dial the number you want to ring.

Press .

During the call, the call in progress icon flashes on screen and tones may indicate the establishment of the call.

While a call is connecting, the phone icon is flashing.

You can adjust the sound level (volume) using the navigator upwards or downwards.

At the end of the conversation press to hang up.

Receiving a call

When you receive a call, the number of your caller is displayed when it is presented by the network.

Press to answer, and speak.

To refuse the call, press .

To stop the ring tone or the vibrate, without refusing the call, press

All the numbers corresponding to incoming and outgoing calls are logged in the list of recent calls.

When on a call, pressing [

Options

] allows you to have access to different functions: switching to hands-free mode, switching

to mute mode, displaying menus, displaying the phonebook.

Pressing [

Mute

] allows you to switch off the microphone temporarily when you want that your correspondent does not listen.

International call

Press 0 (hold down) to display « + », then dial the country code without waiting for the dial tone, then the number of the

called party.

Emergency services

Depending on the network you can obtain the emergency service with or without SIM card or when the keypad is

locked. It is enough to be in an area served by a network.

To obtain the international emergency service, dial

112

then press .

Hands-free mode

During a call, press and hold to switch into hands-free mode.

WARNING:

in this mode do not bring the phone up to your ear.

252338173_myX6-2a_en.book Page 15 Lundi, 10. octobre 2005 3:58 15

16 Using your phone

Using your phone

Improving antenna performance

The antenna is integrated in your phone, under the back cover at the top.

Avoid putting your fingers on this area when the phone is switched ON.

If your fingers obstruct the antenna, the phone may have to operate with a higher

power level than usual; decreasing its efficiency quickly. It could also affect the

quality of your communications.

Increase the battery life of your phone

-Don't press the keys when not necessary: each keypress activates the backlight, and uses much power.

-Don't obstruct the antenna with your fingers.

-Activation of IrDA or Bluetooth functions reduces the phone battery life. We advise you to deactivate them when not in use.

252338173_myX6-2a_en.book Page 16 Lundi, 10. octobre 2005 3:58 15

Using your phone 17

Charging the battery

Your phone is powered by a rechargeable battery. A new battery must be

charged for 4 hours at least before being used for the first time. It reaches its

optimum capacity after a few cycles of use.

When your battery has been discharged, the empty battery icon flashes. In this

case recharge your battery for at least 15 minutes before making any calls in

order not to be cut off quickly.

To recharge the battery:

Connect the charger to a socket.

Plug the end of the cable into the bottom connector of the phone.

The phone is then charging up. The battery icon scrolls up and down to indicate

that it is charging. When the battery is fully charged, the charging stops on its

own. Disconnect the cable.

When charging, the battery may warm up, this is normal.

WARNING

There is danger of explosion if the battery is placed in an incorrectly way or if it is exposed to fire.

Do not short circuit it.

The battery does not have any part that you can change.

Do not try to open the battery casing.

Use only the appropriate chargers and batteries as shown in the phone manufacturer's catalogue.

The use of other types of chargers or batteries may be dangerous or invalidate the warranty.

Used batteries must be disposed of in the appropriate places.

We advise you to take the battery out if you plan not to use the phone for extended periods.

You are strongly advised not to connect your phone to the charger if it doesn’t contain a battery.

The charger is a safety step-down transformer, it is forbidden to modify, alter or replace it by another component (power

supply plug, etc).

252338173_myX6-2a_en.book Page 17 Lundi, 10. octobre 2005 3:58 15

18 Phonebook

Phonebook

Using the phonebook

Enter the

Phonebook

menu, the contacts list is displayed if you already get some (otherwise, go to

Storing a new contact

When a contact is selected, an icon is displayed in the title bar:

contact stored in the SIM card

contact stored in the phone

contact stored in the Fixed Dialling. See

PIN2 number

and

Fixed dialling

Security

Menu for more details about this

activation.

You can search for a contact quiclky by typing the first letters (up to three). You can display it by pressing OK.

Storing a new contact

-Display the Phonebook, press [

Options

] then select

Add SIM contact

Add phone contact

-Enter the last name and press the navigator.

-Enter the number and press the navigator (

Note:

you can fill other fields if you store the contact in the phone memory (email, address, ringtone, photo, etc.).

-Press [

Save

] to store it.

Calling a contact

Several ways:

-Select a contact. Press

to start the call.

-Select a contact, press

, his number is displayed, press [

Call

] to start the call.

-Direct call from the idle screen (only for the contacts stored in the SIM card memory): type the number with which the

contact was saved then

∗

(example : 21

∗

) or the number then

, the number is displayed, confirm.

252338173_myX6-2a_en.book Page 18 Lundi, 10. octobre 2005 3:58 15

Phonebook 19

Contact options

To display the various options, select a contact and press [

Options

Modifying a contact

Modify what you want and validate then select

Save

once the modifications completed.

Sending a message

To send a SMS or a MMS to a contact (see chapter

Messages

Sending by

To send a contact details by SMS, MMS, IrDA or Bluetooth (see chapters

Messages

and

Connectivity

Copy to SIM / Copy to mobile

This allows you to copy your phonebook contacts from one memory to the other. Only the name and the first phone number

will be copied.

My numbers

You can create the entries corresponding to your own numbers in order to consult them when necessary.

Select

My numbers

and validate. Enter the different details and validate.

Memory

Select

SIM

Phone

and validate.

Phone: the screen displays the amount of memory used. The memory capacity is shared between the phonebook and various

other features. If you lack memory, check if you can free some space.

SIM: available memory only for contacts.

Delete/Delete all

This allows you to delet the contact selected or all the contacts.

252338173_myX6-2a_en.book Page 19 Lundi, 10. octobre 2005 3:58 15

20 Phonebook

Set as my card/Business card

The details of a contact stored in the phone memory can be saved in a business card.

-Select a contact and press [

Options

-Select

Set as my card

and [

]. The details are saved as

Business card

. Then you can read it, modify it or send it by

SMS, MMS or IrDA.

Synchronize

You can synchronize your phonebook with your archives stored in your operator’s network depending on the options offered

by your operator.

The local synchronisation with your computer is only computer originated, from Wellphone software; you have only to activate

infrared, Bluetooth, or configure your USB connection in your phone.

Contacts synchronisation with a computer

Install Wellphone, software provided on CD, and click on DIRECTSYNC: you can synchronise your contacts stored in the

phone memory with those of your Lotus Notes™ or Microsoft Outlook™ bases

List choice

This menu allows you to select the default phonebook (SIM, Phone, SIM and Phone) displayed when the phone switches on.

Mailing lists

A mailing list allows you to group contacts: this list can be used to send messages easily to all the list contacts.

-In the phonebook, select the

Mailing Lists

tab pressing the navigator rightwards.

-Press [

Options

-Select

Add mailing list

-Select the list type (SMS or MMS).

-Enter a name and press the navigator.

-Then, on a list press [

Options

]. Select

Add contact

each time you want to add a contact in the list.

252338173_myX6-2a_en.book Page 20 Lundi, 10. octobre 2005 3:58 15

Messages 21

Messages

From this menu, you are able to send SMS and MMS. MMS is a Multimedia Message Service, which allows you to enclose

photos, audio files, and others rich contents to your messages; these messages can even be composed of several slides.

MMS are differently charged to SMS are. Please contact your network provider to get more information on their cost and the

service availability.

Compose SMS

The language used is the one selected on the display of the phone (if the language selected is not compatible with the Easy

Message T9™, the English language will be automatically selected).

The Easy Message T9™ mode helps you to easily write your messages.

Using T9 Mode

Press once the key corresponding to the letter chosen and compose the word by continuing to press the keys corresponding

to the various letters without paying attention to the display: the word is highlighted.

The same sequence of keys pressed can correspond to several words, existing on the dictionary. If the word that appears is

not the word you expected, press the navigator upwards to scroll through the words corresponding to this key sequence.

Once you agree on the word proposed on the screen, press the navigator rightwards to validate it or on the

key (which

validates and inserts a space after the word), and go on writing the next word.

If the word you are expected is not proposed, please add characters until you get the message

Add a word

? Press

Yes

and

validate if the word displayed suits you or modify this word before adding it in the dictionary.

If you do not want to use T9 mode, you can change of input mode (which appear at the top right of the title bar) pressing

∗

the

123 mode

allows you to type numbers and the

ABC mode

allows you to type letters: press on one key several times to

make the letter wanted appear (for example: press twice the

key to display

Upper case

A long press on

∗

will display the next letter in upper case ( icon).

Punctuation characters

Punctuation characters are obtained by pressing the

key (except in

123

mode), or with the help of

Insert

mode (fast access

by briefly pressing

Accented characters

Accented characters are generated automatically in T9 mode.

In ABC mode accented characters are available by pressing the key supporting the non-accented character repeatedly.

252338173_myX6-2a_en.book Page 21 Lundi, 10. octobre 2005 3:58 15

22 Messages

Saving the message

-Select

Save

if you do not want send the message immediately or if you want to send it several times.

-Select where you want to save it (SIM card or phone). It is saved in the

Drafts

menu.

Sending the message

-Once the text entered, press the navigator or press [

Options

] and select

Send

-Enter the receiver’s number or take it in your phonebook pressing [

Options

] then selecting

Contacts

You alson can select a contacts list in your phonebook.

-Select

Send

Note:

if the message type (SMS or MMS) has not been selected when composing the message, the phone prompts for a

cofirmation.

You can use an email address if the message is a MMS.

Receiving messages

When you receive a message, the phone plays the ring tone that you selected, and a message icon comes on the screen of

your phone.

If you do not read the messages, this icon remains displayed on the screen. When it flashes, the memory is full.

Receiving icons, backgrounds or tunes can take several seconds. An icon is flashing when the download of your message is

in progress.

Note that you have two different possibilities for receiving MMS: automatically or manually; if « manual mode » is activated,

then you will receive only a notification in your Inbox, meaning that a MMS is available on the MMS Server; select Retrieve

in the options when you want to retrieve the MMS from the network.

For more details about automatic and retrieval modes, see « Options » on page 24.

Please contact your network provider to get more information on icons, backgrounds or tunes downloading.

Received messages are stored in the SIM card or in the phone until you choose to delete them.

252338173_myX6-2a_en.book Page 22 Lundi, 10. octobre 2005 3:58 15

Messages 23

Messages menu

Inbox

Messages are listed in chronological order, the latest one being displayed first.

The quantity of Not Read and Not Retrieved messages is shown. Not Retrieved and Not Read messages are shown in bold.

Outbox

This menu displays the messages that have not been sent. You can therefore send them again.

Sentbox

The

Sentbox

menu is used to store all your sent messages if you activated the option

Store sent messages

in the

Options

menu (see page 24).

Too many messages saved will quickly fill up the available memory and no further messages will be received.

For each message, its characteristics (shown with an icon) and the time (or date) of sending are displayed on the screen.

Select a message and press the navigator.

Choose one of the options given: Read, Modify, Forward, Delete, Delete all.

Drafts

When you store a composed message, it is stored among the drafts.

Select a message and press [

Options

]. The options are: Delete, Read, Modify, Details.

If you select a message and press the navigator, you can modify it.

If you want to send it, select

Modify

then press [

Options

] and select

Send

Templates

When composing a message, if you selected the

Save as template

option, the template is saved in this menu.

The same options as for the drafts are available for the templates.

252338173_myX6-2a_en.book Page 23 Lundi, 10. octobre 2005 3:58 15

24 Messages

Options

Choose one of the options given: SMS or MMS.

The SMS sending options are: store sent messages, acknowledgment, reply given, period of validity (during that period, the

network provider will try to send the message), message format, msg centre n°.

The MMS options are:

Store sent msgs

: (it is highly recommended that you keep this function deactivated, in order to avoid a full memory),

Retrieval mode

: if you are in a poor coverage area, it may be more convenient to choose the manual retrieval mode which

gives you the retrieve later option.

Priority

: selection of a priority to send a message.

Request delivery report

: request of a delivery report when sending a message.

Period af validity

: during that period, the network provider will try to send the message.

Advanced settings

Send delivery report

: sending a delivery report when receiving a message.

MMS ignore

: if you want to deactivate the reception of any MMS in your phone.

MMS server

: to select another MMS provider, or set the parameters of a new MMS provider.

Display Bcc

: if you want to activate/deactivate this display.

Sender visibility

: you choose to display or not your phone number on the receiver’s phone screen, with that message.

Maximum size

: if you want to activate/deactivate the option of maximum size supported for the MMS.

Memory

You may know the memory available for saving messages.

Choose one of the options given: SMS or MMS.

The SMS screen displays the memory available either on the SIM card or on the phone.

The MMS screen displays how much memory is used in Kbytes.

Local info.

This menu is used to activate reception of information broadcast by the network.

You can choose whether you want to receive this information or not (please contact your network provider).

252338173_myX6-2a_en.book Page 24 Lundi, 10. octobre 2005 3:58 15

Photo 25

Photo

This menu allows you to take photos and use them for different purposes. For instance, you can send them to another phone

or an Internet address, store them, use them as wallpapers or screen savers.

Taking and saving a photo

Taking a photo

-Select the

Camera

menu or press the side key from the idle screen. The camera is now on. Look into your phone display

and position your subject. Move your phone to position your photo.

-Press the navigator or on the side key, the photo is taken and stays on the phone display.

Warning:

if you press [

Back

], you will go back to the previous screen and lose the photo you have just taken.

-Press the navigator if you want to send the photo immediately by MMS.

-Press

Save

to save your photo, a progress bar animates then different options are displayed:

•

Send By:

allows you to send the photo by MMS, IrDA or Bluetooth.

•

New…

: allows you to take a new photo.

•

Editor

: various options to modify a photo.

Zoom: allows you to magnify certain parts of your photo,

Adjustment: allows you to improve contrast,

Emboss: allows you to modify a photo with an embossed grey tint,

Negative: allows you to change a photo into negative,

Grey Scale: allows you to change color into black and white,

Contrast: allows you to increase or decrease the contrast of your photo,

Sharpen: allows you to sharpen a photo,

Blur: allows you to add blur to a photo,

Sepia: allows you to change colors into sepia,

Shape: allows you to shape a photo,

Brigthness: allows you to increase or decrease the brightness of a photo,

Solarize: allows you to increase or decrease the solarize of a photo,

Saturation: allows you to increase or decrease the color saturation.

•

Rename

: allows you to modify the name of a photo.

•

Add to contact

: allows you to assign a photo to a contact saved in the phonebook.

•

Use as

: allows you to select the photo as a wallpaper or screensaver.

252338173_myX6-2a_en.book Page 25 Lundi, 10. octobre 2005 3:58 15

26 Photo

If there is not enough memory to save the photo, a warning message appears, prompting you to confirm whether you want

to go on.

Once taken, the photo has a number and is saved in

Multimedia

Pictures

Note:

using the camera during a call may disturb the call quality.

Settings before taking a photo

Zoom

To activate zoom, use the navigator upwards or downwards or the side keys (

and

Note: if the zoom selected does not match with the storing format, the photo is automatically saved in an appropriate format

Other settings

(pressing [

Options

]):

•

Activate timer

: to take a photo with a 5, 10 or 15 second time delay.

•

Effects

: to select an effect (sepia, negative or grey levels).

•

Exposure

: to select luminosity (indoor, sunny, etc.).

•

Timer duration

: to select the timer delay

•

Click sound

: to select the sound you will hear when taking a photo.

•

Photo quality

: to select the photo quality.

•

Photo format

: to select the format in which your photo will be saved

•

Go to video

: to take a video (see chapter

Video

252338173_myX6-2a_en.book Page 26 Lundi, 10. octobre 2005 3:58 15

Video 27

Video

Taking a video

-Select the

Video

menu.

-If necessary, select the following settings pressing [

Options

•

Video sound:

allows you to record wether not the sound when recording a video.

•

Video restriction:

allows you to choose a video size.

Press the navigator to record then press [

Stop

] when you want to stop recording.

The video is automatically saved and has a number. It is saved in

Multimedia

Videos

Note

: the phone automatically stops recording when the maximum size available is reached.

Press [

Options

] to display the options:

•

Record a video

: allows you to take a new video.

•

Playback

: allows you to play the video.

•

Send By

: allows you to send a video by MMS, IrDA or Bluetooth.

•

Rename

: allows you to modify a video name.

•

Delete

: allows you to delete a video.

Note:

the videos are saved in the phone with a .3gp format.

252338173_myX6-2a_en.book Page 27 Lundi, 10. octobre 2005 3:58 15

28 Multimedia

Multimedia

This

menu contains photos and videos taken and saved with your phone, the sounds recorded and all the

downloaded objects (pictures, ring tones, etc). It also contains ghosts which display the copyrights status of the multimedia

objects downloaded in the phone or in the memory card.

There are two tabs, that you can select pressing the navigator rightwards or leftwards:

Mobile

tab (phone memory)

My microSD™

tab (available if you have inserted a memory card in your phone).

With the navigator, enter the menu:

Pictures

To display a picture, select it and press the navigator.

To display others, press the navigator upwards or downwards.

To display the different options, press [

Options

New photo

: allows you to take a new photo.

Use as

: allows you to use the picture as a wallpaper or screen saver.

Send by

: makes it possible to transmit a picture (NB: you may not send any copyrighted picture).

-Direct print

: if your phone is connected to a printer (via infrared, Buletooth or USB cable) this option allows you to print

the photo directly (without using a PC). If you use a USB cable, it must be «Pictbridge» configured (see chapter

Connectivity

Sounds

To listen to a sound, select it and press the navigator.

To listen to others, press the navigator upwards or downwards.

Note: to listen to several sounds in continuation, it is better to use Music Player.

Videos

To display a video, select it and press

. To display the video in full screen, press the navigator rightwards.

To display others, press the navigator upwards or downwards.

Exchanging objects with a PC and your phone

You must connect them with a USB cable, by infrared or Bluetooth (see chapter

Connectivity

252338173_myX6-2a_en.book Page 28 Lundi, 10. octobre 2005 3:58 15

Connectivity 29

Connectivity

You can exchange with other devices (PC, mobile phones, personal assistants, printers, etc.) various data: pictures, sounds,

photos, videos, To Do tasks, organiser events, contacts, etc.

Data exchange can be done through:

-a serial or USB cable,

-an infrared connection,

-a bluetooth connection.

If you have inserted a memory card in your phone, it is considered as an additional memory in the Windows explorer files

directory; you can copy/paste.

If you want to exchange objects between the phone memory and a PC, you must install the Wellphone software provided on

CD: select Multimedia to open, from the PC, the phone files explorer.

To save contacts, events or tasks, the Wellphone software provided on the CD with your phone (also available from

http:/www.wellphone.com) must be installed on a PC.

You can read more details about Phonebook or Calendar in chapters

Phonebook

and

Calendar

Note

: If a call comes in during an exchange of data with your PC, the link will be interrupted and will have to be manually

re-started.

Bluetooth

This menu allows you to set your phone Bluetooth connection in order to communicate with other devices equipped with

Bluetooth: for example, an audio connection with a pedestrian kit, a car kit or a data connection with a PC.

Bluetooth is a free wireless connection, with a 10 metre maximum range.

Paired devices

: allows you to search for devices which may connect with Bluetooth link with your phone (for instance:

headset).

Mode

: allows you to activate the phone Bluetooth connection.

-Off: Bluetooth connection impossible.

-On and hidden: your phone is not detected by the other devices but the phone detects the other devices.

-On and visible: your phone can be detected by another device.

My Bluetooth

name

: allows you to assign a name to your phone for the Bluetooth connection. This name is displayed on the

devices connected.

252338173_myX6-2a_en.book Page 29 Lundi, 10. octobre 2005 3:58 15

30 Connectivity

IrDA

This menu allows you to activate or deactivate the infrared connection.

Serial speed

This menu enables you to select the speed to be used for data exchanges via your phone's serial port. Except for specific

requirements, it is advisable to stick to the default setting:

Automatic

Car kit

This menu allows you to configure the options of the phone with a pedestrian kit or a car kit (Automatic response, Switch off,

Kit volume).

USB mode

This menu allows you to select a mode to connect the phone to a peripheral with the USB cable available as an accessory.

Modem

: to exchange data between the phone memory and a PC.

Pictbridge

: to connect the phone to a printer (printing photos) without using a PC.

Mass storage for PC

: to exchange data between the memory card inserted in the phone and a PC.

SyncML

You can synchronize your phonebook, your organizer or your ToDos with your archives stored in your operator’s network

depending on the options offered by your operator.

The local synchronisation with your computer is only computer originated, from Wellphone software; you have only to activate

infrared, Bluetooth, or configure your USB connection in your phone.

252338173_myX6-2a_en.book Page 30 Lundi, 10. octobre 2005 3:58 15

Music Player 31

Music Player

This menu allows you to listen to musics in a contiuous way like a portable music player.

If you do not have any music in memory, use WAP to download some or connect your phone to a PC (see chapter

Multimedia

Two tabs are displayed:

Player

and

Library

. Select

Library

pressing the navigator rightwards. The directory of the musics

contained in the phone and in the memory card (if it is present) is displayed.

Select [

Options

]: you can play all the musics directly or manage them in lists.

Creating a playlist

-Select [

Options

] in the

Library

tab.

-Select

Create playlist

-Type a name for your playlist and press

-The list of the musics is displayed in two tabs: those contained in the phone memory or pressing the navigator rightwards

those contained in the memory card.

-Select the music you want in your playlist and press

to add the music to the playlist ; do it again if you want add others

or select

Playlist: Add all

to add them all to the playlist.

When pressing [

Options

] on a playlist, you can display or play the contents, add musics, create a new playlist, delete one or

modify its name.

Playing your music

Player

tab: This tab opens as soon as a music or a list of musics, has been selected to be played.

To display the different options, press [

Options

Play

: to play musics of the playlist.

Remove from list

: to remove the music selected from the playlist.

Clear list

: to remove all the musics from the playlist

Shuffle

: to play the musics in a random way.

Play options

: to play the musics one by one or in a continuous way.

Send By

: to send the music by message, IrDA or Bluetooth.

Rename

: to rename the music.

Priority to

: to give priority to phone (in case of incoming call) or to playing music.

Note:

music is in pause in case of incoming call, it automatically resumes at the end of the call.

Details

: properties of the music selected.

252338173_myX6-2a_en.book Page 31 Lundi, 10. octobre 2005 3:58 15

32 WAP

WAP

WAP (Wireless Application Protocol): a protocol that translates the Internet language into WML and HTML languages that

can be read by a phone. The WAP function allows you to log onto certain Internet sites. You can log onto sites that allow you

to download ringtones, icons, animated screensavers, Java™ applications, videos to your phone.

The WAP Menu

Go to URL

: this menu allows you to input an Internet address directly.

Bookmarks

: allows to store bookmarks (addresses of Internet sites).

A bookmark stored in the list can be modified, sent or deleted.

You can receive bookmarks and add them to this list.

History

: backward and forward navigation of the pages displayed are kept in

memory.

Browser settings

Profiles

: allows you to select or modify your provider’s configuration settings

or to configure others providers’settings.

: allows you to add a new profile or to display the available memory.

Note:

see chapter

Idle screen

for information on @ and GPRS icons.

The WAP navigator is under licence:

The WAP navigator and the softwares

included are the exclusive property o

Openwave. For this reason, it is

forbidden to modify, translate,

disassemble or even decompile all o

part of these softwares.

252338173_myX6-2a_en.book Page 32 Lundi, 10. octobre 2005 3:58 15

WAP 33

WAP Logging on

The connection to a WAP service on the GPRS network is not cut if an incoming call is received. You can answer the call.

If you are logging onto the GSM or GPRS network, the @ symbol flashes, the metering of the cost of the call starts as soon

as it stops flashing.

Downloading objects

Some WAP sites allow you to download ringtones, icons, animated screensavers, games or JAVA™ applications. Once

downloaded, they are stored in your phone's memory. You can then save them in your phone (same operation as used for

downloading using messages).

WAP Logging off

To log off, press . The logoff happens automatically after a few seconds of inactivity if you forget to log off. This period

is defined by the linger time setting.

GPRS

A flashing icon indicates that the phone is logging onto a GPRS network.

A non-flashing icon indicates that the GPRS network is available; if the icon is dark, it indicates that the phone is logged onto

the GPRS network.

This icon is not displayed if the GPRS network is not available or if the SIM card inserted in your phone does not include the

GPRS service. It may also disappear when accessing WAP services if the connection uses the GSM network instead of the

GPRS network.

252338173_myX6-2a_en.book Page 33 Lundi, 10. octobre 2005 3:58 15

34 Games

Games

Your phone contains one or several games, depending on model. You can

download more. You are the owner of a SAGEM mobile phone which gives you

the ability to download applications and games to be executed on your phone

thanks to the built-in Java™ engine.

However, receiving applications from everywhere implies some basic knowledge

of the possible effects of such download.

We advise you to dwonload certified games or applications from your operator

sites or from www.planetsagem.com.

By default, the connection URL of your operator or of PlanetSagem is configured

in your phone.

If no connection URL is configured, by selecting the

More games

menu, you

display the WAP function to configure new profiles which allow you to download

games or applications.

When you select a game or an application, the

General Settings/Connection

menu (displayed with [

Options

] key) allows you to configure a profile which only

be used by the game or application to connect to the network (to exchange

scores for example) but is not used to download new games or applications.

252338173_myX6-2a_en.book Page 34 Lundi, 10. octobre 2005 3:58 15

Applications 35

Applications

Services

This item may not be present on your phone’s menu, as its contents depends on your SIM.

Alarm

This menu allows you to set and activate the alarm.

The alarm works even when the phone is switched off.

Timer

This menu is used to set and activate the timer.

The alarm icon appears on the idle screen.

Calculator

This menu allows you to use your phone as a calculator.

Use the following keys to make calculations:

Upwards: Add, downwards: Subtract, rightwards: Multiply, lefwards: Divide

The following keys are used for:

: Equals or convert

: Delete

∗

: Decimal point.

If no calculations are being run, pressing [

Convert

] allows you to use the value in the

converter

directly.

Converter

This menu allows you to convert one currency to another.

Enter a value and press the navigator upwards to convert from one currency to another, or downwards to convert back.

Pressing [

Options

] allows you to use the following options:

Rapid exchange

If the Rapid exchange is activated, the converter will work in the idle screen by entering the desired numbers and pressing

the navigator to convert.

252338173_myX6-2a_en.book Page 35 Lundi, 10. octobre 2005 3:58 15

36 Applications

Exchange rate

Enter the exchange rate corresponding to the chosen currency.

Currency

Enter the two types of currency to be converted.

Go to calculator

This option allows you to use immediately the value converted in the

calculator

ToDo

This menu allows you to add ToDo’s, access category-based Todo management and delete all the ToDo’s.

If there are not any ToDo, you directly access to the options below.

If there is a ToDo, press [

Options

] to display the options.

Add written ToDo/Add vocal ToDo

: allows you to add ToDo of the text or voice type. Fill in the different items. Save the

ToDo.

Categories

: allows you to see the different event categories, assign a specific ring tone to each individual category, know

the number of events in each category and see them.

Synchronize

: you can synchronize your organizer with your archives stored in your operator’s network depending on the

options offered by your operator.

The local synchronisation with your computer is only computer originated, from Wellphone software; you have only to

activate infrared, Bluetooth, or configure your USB connection in your phone.

The other menus are:

See month

: allows you to access events on a month-by-month basis.

See week

: allows you to access events on a week-by-week basis.

See today

: allows you to access the events for the current day and the actions possible on any event (see, modify, delete

and send).

See date

: allows you to access events at a specific date.

252338173_myX6-2a_en.book Page 37 Lundi, 10. octobre 2005 3:58 15

38 Settings

Settings

Phone settings

Silent mode

This menu allows you to switch to Silent mode.

Silent mode can also be accessed via the idle screen by holding down the

key.

When the phone is in silent mode, this relevant icon appears on the idle screen.

In this mode, the ring tone will not function, except for the alarm clock.

Note:

if you have activated the silent mode, it does not remain after switching off your phone.

Ring tones

This menu allows you to allocate a ring tone to different functions (call receiving, message receiving, alarm).

Vibrate

This menu allows you to activate the vibrate mode for calls.

Languages

This menu allows you to choose your phone's display language.

Select your language and validate.

If you select

Automatic

, the language used will be the one relative to your SIM card.

Beeps

This menu allows you to activate a beep for the battery, the keypad or the network.

Date / Time

Set Date/Time

This menu allows you to set the date and time of your phone.

Automatic update

This menu allows you to choose manual or automatic updating of date and time (after switch off of your phone or when going

abroad for instance) (service depending on the operator).

Please select Automatic, Manual or On demand and press [

Select

252338173_myX6-2a_en.book Page 38 Lundi, 10. octobre 2005 3:58 15

Settings 39

Display

This menu allows you to select the date and time display.

In the list that appears, select the desired display type between: Analog, Digital, None and validate.

Time zone

This menu allows you to change time in relation to the GMT time.

Choose the time of the country desired by calculating the time from the GMT time.

Daylight savings

This menu allows you to set your phone to the summer/winter time.

Select 1 h, 2 h

Summer time

Winter time

depending on the season, and validate.

Display

This menu allows you to customize your screen by choosing a different presentation.

Wallpaper

This menu allows you to display the background picture you want on your phone.

Note

: you can select wallpapers through the phone default wallpapers, the pictures downloaded in

Multimedia/Pictures

and

the pictures of your memory card.

-No wallpaper: select

None

-Several wallpapers in a random way: select

Random

-A specific wallpaper: select

Browse

•Press [

Select

] on the wallpaper name, the wallpaper is selected.

•Press the navigator: the picture is displayed. Press [

Select

] to select it as your phone wallpaper or press the navigator

upwards or downwards to display others.

Screensaver

This menu allows you to display an animation when the phone is in standby mode.

Note

: you can select screensavers through the phone default screensaver, the pictures downloaded in

Multimedia/Pictures

and the pictures of your memory card.

-No screensaver: select

Normal screen

-Several wallpapers in a random way: select

Slide Show

-A specific screensaver: select

Browse

•Press [

Select

] on the screensaver name, the screensaver is selected; or

•Press the navigator: the picture is displayed. Press [

Select

] to select it as your phone screensaver or press the

navigator upwards or downwards to display others.

252338173_myX6-2a_en.book Page 39 Lundi, 10. octobre 2005 3:58 15

40 Settings

Operator logo

This menu allows you to display your operator's logo on the idle screen.

On the menu, please select the menu and [

Select

Activate

Deactivate

and press [

Energy saving

Economic mode

You can select one of the following eco modes:

Complete

: the screen is off. Press

, the red or green key to turn on the backlight and see the time. Press

∗

to light

up the screen and enter the menus. This mode gives the maximum efficiency of the battery life.

Locked keyboard

: the screen is off, time remains displayed. Press

, the red or green key to turn on the backlight and

see the time. Press

∗

to light up the screen and enter the menus.

Unlocked keyboard

: the keypad is always active, meaning that when you press any key, it allows you to light up the

screen and enter the menus. This mode decreases the battery life.

Partial

: the screen is off. Press the red key to light up the screen and enter the menus.

Backlight

Screen only

: only the screen is lit up.

Full backlight

: both the screen and the keypad are lit up.

Note:

in any case, after a certain time of inactivity, the backlight will be automatically turned off to save battery life.

Contacts

Contacts list:

This menu allows you to select the default phonebook (phone or SIM card) displayed when the phone switches

on.

Storing:

This menu allows you to select the way to sort contacts in the phonebook (by name or first name) and the filter

applied on the contacts list display (SIM contacts, phone memory or both).

Calls

The

Calls

menu allows you to manage all the calls functions (call forward, displaying numbers, call waiting, voicemail number,

etc.).

Call forward

Depending on your subscription, this service allows you to forward incoming calls to a different number or to the voice mailbox.

Choose the type of forwarding you want from the options available.

252338173_myX6-2a_en.book Page 40 Lundi, 10. octobre 2005 3:58 15

Settings 41

View last calls

This menu allows you to access the list of last numbers used.

Fast access to the list of calls from the idle screen: press .

Counters

This menu allows you to consult the duration of the up calls.

It can also be used to check the volume of data exchanged in GPRS.

Display number

This menu allows you to modify the status of the display number function.

Select one of the options given: Anonymous mode, My number, Callers’ number.

Anonymous mode

You have the ability to mask your number on the phone of the person you are calling.

Preset:

network default mode.

No:

you choose not to activate anonymous mode and then to display your number.

Yes:

you choose to active anonymous mode and then not to display your number.

Call waiting

(Operator-dependent service)

During a call, you may be informed that a caller is trying to reach you: you hear a special tone. The caller's identity is displayed

on the screen (name or number).

You can

activate, deactivate,

status

of the call waiting service in order to check if it is active or not.

During a call, if a second caller tries to contact you, the screen displays the call warning.

Auto redial

This menu allows you to call back a caller you have not managed to reach.

You can set the redial function to inactive, on request or systematic.

If you choose

On demand

, your phone will offer to redial your caller automatically if his number is busy.

Blacklist

The blacklist is used to limit failures on automatic calls (calls generated by the automatic redial function or by applications:

data, fax for example).

252338173_myX6-2a_en.book Page 41 Lundi, 10. octobre 2005 3:58 15

42 Settings

When several automatic calls failed with a number (number busy or unknown), this number is put in the blacklist and no

automatic call will be done with this number any more until you delete it from the blacklist.

Note

: this function does not apply to the calls performed manually.

Voicemail

This function is used to record your voicemail access number.

This number will be used during a call to the voice mailbox using the programmable keys.

Enter your answer phone number and validate.

ALS

The ALS (Alternate Line Service) function allows you, depending on your subscription, to have two phone lines. The number

of the line selected (1 or 2) for the calls appears on the idle screen.

Networks

This menu allows you to configure network preferences.

Choose

Selection

to activate (automatically or manually) one of the networks accessible in the area in which your are located.

Choose

Preferred

to view all the pre-registered networks.

Choose

Network type

to select your network: GSM-DCS or PCS (depending on model).

Choose

GPRS

to select the way you want to be attached on the GPRS network: always, or only when needed (when

launching a data connection).

Security

This menu allows you to configure your phone's security settings.

PIN number

This menu allows you to activate and modify your phone's PIN.

To modify the PIN, select

Modify PIN code

and [

Select

Enter old PIN and validate.

Enter new PIN twice and validate.

To activate or deactivate the PIN, select the

Control PIN

menu and [

Select

Enter PIN and validate.

Select

Activate

Deactivate

and validate.

252338173_myX6-2a_en.book Page 42 Lundi, 10. octobre 2005 3:58 15

Settings 43

PIN2 number

You have a second PIN number to allow you to access certain functions*.

* These functions may or may not be available depending on your SIM card.

Proceed as above in order to activate, deactivate or modify PIN number 2 of your phone.

Phone code

The Phone code menu allows you to activate the phone code so that it is requested and checked whenever the phone is

switched on if a different SIM card is used. This code is automatically linked to the SIM card installed when the phone is

activated, for example to protect the phone if stolen.

Select

Check

and [

Select

Enter 0000 (the factory code, by default) and validate.

Select

Activate

Deactivate

and validate.

To modify the phone code, select

Modify

and validate.

Enter old phone code and validate.

Enter new phone code and validate.

Enter phone code again to confirm it and validate.

Confidentiality

This menu allows the activation or deactivation of automatic deletion, after power off/on, of outgoing calls, messages stored

or organizer events.

Select

Activate

Deactivate

and validate.

Operator

This menu allows you to modify the call barring.

Access to this service depends on your type of subscription.

Call barring

This menu allows you to block the sending or receiving of certain calls.

Before you can use this service, a password will be provided by your operator when you take out your subscription.

Access to this service depends on your subscription type.

To activate call barring :

-Select incoming or outgoing calls.

-Select the call type on which you want to activate call barring.

252338173_myX6-2a_en.book Page 43 Lundi, 10. octobre 2005 3:58 15

44 Settings

-Select:

•either All,

•or If roaming, if you are away from your home country and if roaming is available, only incoming calls will be blocked.

-Select Activation and enter password.

Fixed dialling

This menu allows you to restrict the outgoing calls.

The availability of this menu depends on your SIM.

Enter PIN2 number and validate.

Select

Activate

Deactivate

and validate.

Proceed as for any other phonebook.

When activating this function, only the numbers stored in the phonebook can be called.

This phonebook is linked to the SIM card, and its size depends on the card's capacity.

Cost

This menu allows you to control the cost of your calls (*).

The

Cost

menu (*) lets you check the cost of the last call you made and of all the calls you made since you last deleted them.

The

Delete costs

menu (*) lets you delete the cost of your last call and reset the cost counter after entering your PIN 2 code.

(*) WARNING

Depending on how the networks and associated subscription cards are configured, some functions may be unavailable (these

are marked out with *).

Player settings

Play options

: to play the musics one by one or in a continuous way.

Player Priority

: to give priority to phone (in case of incoming call) or to playing music.

Browser settings

This menu allows you to set various parameters needed for WAP connection (see chapter

WAP

252338173_myX6-2a_en.book Page 44 Lundi, 10. octobre 2005 3:58 15

Settings 45

Camera settings

This menu allows you to set the camera features of your phone.

Timer:

this menu enables you to take a photo with a 5, 10 or 15 second time delay. During preview of the photo, activate

the delayed exposure by pressing [

Timer

]. (NB: if you want to take the photo immediately, then press

Click sound:

This menu allows you to select the sound you will hear when taking a photo.

Photo format:

This menu allows you to choose the format in which your photo will be saved.

Photo quality

: This menu allows you to select the photo quality.

Video settings

This menu allows you to set the video features of your phone.

Video sound:

This menu allows you to select or not the sound when recording a video.

Video size restriction:

This menu allows you to choose a video size.

Shortcuts

This menu allows you to customize the settings of your phone to make it as convenient as possible for you to use.

(Function available depending on model)

This menu allows you to allocate functions to the programmable keys:

Select the key that you wish to modify and validate.

Choose the function that you want to allocate to this key and validate.

Storage

This menu allows you to select (phone memory or memory card) where the sounds, pictures, videos or applications

downloads will be stored as well as the pictures, videos and sounds taken with your phone.

Keys checking

When activating this choice, you will be warned when a using right of a multimedia object (ringtone or wallpaper for instance)

will soon expire.

Help

This menu allows you to activate or deactivate the display of the help in the phone.

252338173_myX6-2a_en.book Page 45 Lundi, 10. octobre 2005 3:58 15

46 Care and safety information

Care and safety information

SAR

THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES

Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure

to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government and Health Canada.

These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The

guidelines are based on standards that were developed by independent scientific organizations through periodic and

thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of

all persons, regardless of age and health.

The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate,

or SAR. The SAR limit set by the FCC and Health Canada is 1.6 W/kg (*). Tests for SAR are conducted using standard

operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency

bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating

can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to

use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower

the power output.

Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the

limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and

locations (i.e., at the ear and worn on the body) as required by the FCC for each model.

The highest SAR value for this model phone as reported to the FCC when tested for use at the ear is 1.18 W/kg and when

worn on the body is 0.789 W/kg.

(*) In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kilogram (W/kg)

averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection

for the public and to account for any variations in measurements.

Safety information.fm Page 46 Lundi, 10. octobre 2005 5:06 17

Care and safety information 47

While there may be differences between the SAR levels of various phones and at various positions, they all meet the

government requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR

levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with

the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID

M9H95MYX62A.

Advice for limiting exposure to radiofrequency (RF) fields

For individuals concerned about limiting their exposure to RF fields, the World Health Organization (WHO) provides the

following advice:

Precautionary measures: Present scientific information does not indicate the need for any special precautions for the use of

mobile phones. If individuals are concerned, they might choose to limit their own or their children’s’ RF exposure by limiting

the length of calls, or using "hands-free" devices to keep mobile phones away from the head and body.

Further information on this subject can be obtained from the WHO home page http://www.who.int/peh-emf WHO Fact sheet 193: June

2000.

Safety

Never attempt to disassemble your phone. You alone are responsible for how you use your phone and any consequences of

its use.

As a general rule, always switch off your phone wherever the use of a phone is prohibited.

Use of your phone is subject to safety measures designed to protect users and their environment.

Do not use your phone in damp areas (bathroom, swimming pool…). Protect it from liquids and other moisture.

Do not expose your phone to extreme temperatures lower than - 10°C an higher than + 55°C.

The physicochemical processes created by chargers impose temperature limits when charging the battery. Your phone

automatically protects the batteries in extreme temperatures.

Do not leave your phone within the reach of small children (certain removable parts may be accidentally ingested).

Electrical safety

Only use the chargers listed in the manufacturer’s catalogue. Using any other charger may be dangerous; it would also

invalidate your warranty. Line voltage must be exactly the one indicated on the charger’s serial plate.

Aircraft safety

When travelling by plane, you will need to switch your phone off when so instructed by the cabin crew or the warning signs.

Using a mobile phone may be dangerous to the operation of the aircraft and may disrupt the phone network.

Its use is illegal and you could be prosecuted or banned from using cellular networks in the future if you do not abide by these

regulations.

252338173_myX6-2a_en.book Page 47 Lundi, 10. octobre 2005 3:58 15

48 Care and safety information

Explosive materials

Please comply with warning signs at petrol station asking you to switch your phone off. You will need to comply with radio

equipment usage restrictions in places such as chemical plants, fuel depots and at any location where blasting operations

are under way.

Electronic equipment

To avoid the risk of demagnetisation, do not let electronic devices close to your phone for a long time.

Electronic medical equipment

Your phone is a radio transmitter which may interfere with electronic medical equipment or implants, such as hearing aids,

pacemakers, insulin pumps, etc. It is recommended that a minimum separation of 15 cm be maintained between the phone

and an implant. Your doctor or the manufacturers of such equipment will be able to give you any advice you may need in this

area.

Hospitals

Always make sure that your phone is switched off in hospitals when so instructed by warning signs or by medical staff.

Road safety

Do not use your phone when driving. In order to give your full attention to driving, stop and park safely before making a call.

You must comply with any current legislation.

Distance of operation

This phone model has been tested and meets radiofrequency exposure guidelines when used as follows:

-against the ear: place or receive a phone call and hold the phone as you would a wireline telephone,

-body worn: when transmitting, place the phone in a carry accessory that contains no metal and positions the phone a

minimum of 1.5 cm form your body. Use of other accessories may not ensure compliance with radiofrequency exposure

guidelines. If you do not use a body worn accessory and are not holding the phone at the ear, position the phone a

minimum of 1.5 cm from your body,

-data operation: when using a data feature, position the phone a minimum of 1.5 cm from your body for the whole duration

of the data transmission.

252338173_myX6-2a_en.book Page 48 Lundi, 10. octobre 2005 3:58 15

End User Licence Agreement (EULA), for the software 49

End User Licence Agreement (EULA), for the

software

CONTEXT AND ACCEPTATION OF THE AGREEMENT

You have acquired a Mobile Phone device ("DEVICE"), manufactured by Sagem Communication (SAGEM), that includes

software either developed by SAGEM itself or licensed third party Software suppliers ("SOFTWARE COMPANIES") to

SAGEM with the rights to sub-license it to the purchaser of the device. Those installed software products whatever their

company of origin, and wherever the name of the company of origin is indicated of not in the DEVICE documentation, as well

as associated media, printed materials, and "online" or electronic documentation ("SOFTWARE") are protected by

IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT ("EULA"), DO NOT USE THE DEVICE OR COPY

THE SOFTWARE. INSTEAD, PROMPTLY CONTACT SAGEM FOR INSTRUCTIONS ON RETURN OF THE UNUSED

DEVICE(S) FOR A REFUND.

ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE,

WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT)

SOFTWARE includes software already installed on the DEVICE ("DEVICE Software") and Software contained on the CD-

ROM disk ("Companion CD"), if any is supplied with the product.

GRANT OF SOFTWARE LICENCE

This EULA grants you the following licence:

DEVICE Software

. You may use the DEVICE Software as installed on the DEVICE. All or certain portions of the DEVICE

Software may be inoperable if you do not have and maintain a service account with an appropriate Mobile Operator, or if the

Mobile Operator's network facilities are not operating or configured to operate with the DEVICE software.

COMPANION CD

. If any is supplied, additional software for your personal computer is included with your DEVICE. You may

install and use the software component(s) contained in the Companion CD only in accordance with the terms of the printed

or online end user license agreement(s) provided with such component(s). In the absence of an end user license agreement

for particular component(s) of the Companion CD, you may install and use only one (1) copy of such component(s) on the

DEVICE or a single computer with which you use the DEVICE.

Security Updates

. The SOFTWARE may include digital rights management technology. If SOFTWARE does contain digital

rights management technology, content providers are using the digital rights management technology ("DRM") contained in

the SOFTWARE to protect the integrity of their content ("Secure Content") so that their intellectual property, including

copyright, in such content is not misappropriated. Owners of such Secure Content ("Secure Content Owners") may, from time

to time, request manufacturers or SOFTWARE SUPPLIERS to provide security related updates to the DRM components of

the SOFTWARE ("Security Updates") that may affect your ability to copy, display and/or play Secure Content through the

SOFTWARE or third party applications that utilise the DRM.

252338173_myX6-2a_en.book Page 49 Lundi, 10. octobre 2005 3:58 15

50 End User Licence Agreement (EULA), for the software

You therefore agree that, if you elect to download a licence from the Internet which enables your use of Secure Content,

Suppliers may, in conjunction with such licence, also download onto your DEVICE such Security Updates that a Secure

Content Owner has requested that SOFTWARE SUPPLIERS distribute. SAGEM and SOFTWARE SUPPLIERS will not

retrieve any personally identifiable information, or any other information, from your DEVICE by downloading such Security

Updates.

DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS

. All title and intellectual property rights in and to the SOFTWARE (including but not limited to any images,

photographs, animations, video, audio, music, text and "applets," incorporated into the SOFTWARE), the accompanying

printed materials, and any copies of the SOFTWARE, are owned by SAGEM or the SOFTWARE SUPPLIERS. You may not

copy the printed materials accompanying the SOFTWARE. All title and intellectual property rights in and to the content which

may be accessed through use of the SOFTWARE is the property of the respective content owner and may be protected by

applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such content. All

rights not specifically granted under this EULA are reserved by SAGEM and the SOFTWARE SUPPLIERS

Limitations on Reverse Engineering, Decompilation and Disassembly

. You may not reverse engineer, decompile, or

disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law

notwithstanding this limitation.

Single DEVICE

. The DEVICE Software is licensed with the DEVICE as a single integrated product. The DEVICE Software

installed in the memory of the DEVICE may only be used as part of the DEVICE.

Single EULA

. The package for the DEVICE may contain multiple versions of this EULA, such as multiple translations and/or

multiple media versions (e.g., in the user documentation and in the software). Even if you receive multiple versions of the

EULA, you are licensed to use only one (1) copy of the DEVICE Software.

Software Transfer

. You may not permanently transfer any of your rights under this EULA with regard to the DEVICE Software

or Companion CD, except as permitted by the applicable Mobile Operator. In the event that the Mobile Operator permits such

transfer, you may permanently transfer all of your rights under this EULA only as part of a sale or transfer of the DEVICE,

provided you retain no copies, you transfer all of the SOFTWARE (including all component parts, the media and printed

materials, any upgrades , this EULA and, if applicable, the Certificate(s) of Authenticity), and the recipient agrees to the terms

of this EULA. If the SOFTWARE is an upgrade, any transfer must include all prior versions of the SOFTWARE.

Software Rental

. You may not rent or lease the SOFTWARE.

Speech/Handwriting Recognition

. If the SOFTWARE includes speech and/or handwriting recognition component(s), you

should understand that speech and handwriting recognition are inherently statistical processes; that recognition errors are

inherent in the processes; and that errors can occur in the component's recognition of your handwriting or speech, and the

final conversion into text.. Neither SAGEM nor its suppliers shall be liable for any damages arising out of errors in the speech

and handwriting recognition processes.

252338173_myX6-2a_en.book Page 50 Lundi, 10. octobre 2005 3:58 15

End User Licence Agreement (EULA), for the software 51

NOTICE REGARDING THE MPEG-4 VISUAL STANDARD

. The SOFTWARE may include MPEG-4 visual decoding

technology. MPEG LA, L.L.C. requires the following notice:

USE OF THIS SOFTWARE IN ANY MANNER THAT COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED,

EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR INFORMATION (i) GENERATED BY AND OBTAINED

WITHOUT CHARGE FROM A CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE, AND (ii) FOR

PERSONAL USE ONLY; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA, L.L.C.

If you have questions regarding this Notice, please contact MPEG LA, L.L.C., 250 Steele Street, Suite 300, Denver, Colorado

80206; Telephone 303 331.1880; FAX 303 331.1879

Termination

. Without prejudice to any other rights, SAGEM may terminate this EULA if you fail to comply with the terms and

conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE and all of its component parts.

Consent to Use of Data

. You agree that SOFTWARE SUPPLIERS may collect and use technical information gathered in

any manner as part of product support services related to the SOFTWARE. SOFTWARE SUPPLIERS may use this

information solely to improve their products or to provide customised services or technologies to you. SOFTWARE

SUPPLIERS may disclose this information to others, but not in a form that personally identifies you.

Internet Gaming/Update Features

. If the SOFTWARE provides, and you choose to utilise, the Internet gaming or update

features within the SOFTWARE, it is necessary to use certain computer system, hardware, and software information to

implement the features. By using these features, you explicitly authorise SOFTWARE SUPPLIERS to use this information

solely to improve their products or to provide customised services or technologies to you. SOFTWARE SUPPLIERS may

disclose this information to others, but not in a form that personally identifies you.

Internet-Based Services Components

. The SOFTWARE may contain components that enable and facilitate the use of

certain Internet-based services. You acknowledge and agree that SOFTWARE SUPPLIERS may automatically check the

version of the SOFTWARE and/or its components that you are utilising and may provide upgrades or supplements to the

SOFTWARE that may be automatically downloaded to your Device.

Links to Third Party Sites

. The SOFTWARE may provide you with the ability to link to third party sites through the use of

the SOFTWARE. The third party sites are not under the control of SAGEM. Neither SAGEM nor its affiliates are responsible

for (i) the contents of any third party sites, any links contained in third party sites, or any changes or updates to third party

sites, or (ii) webcasting or any other form of transmission received from any third party sites. If the SOFTWARE provides links

to third party sites, those links are provided to you only as a convenience, and the inclusion of any link does not imply an

endorsement of the third party site by SAGEM or its affiliates.

Additional Software/Services

. The SOFTWARE may permit SAGEM to provide or make available to you SOFTWARE

updates, supplements, add-on components, or Internet-based services components of the SOFTWARE after the date you

obtain your initial copy of the SOFTWARE ("Supplemental Components").

If SAGEM provides or makes available to you Supplemental Components and no other EULA terms are provided along with

the Supplemental Components, then the terms of this EULA shall apply.

SAGEM reserves the right to discontinue any Internet-based services provided to you or made available to you through the

use of the SOFTWARE.

252338173_myX6-2a_en.book Page 51 Lundi, 10. octobre 2005 3:58 15

52 End User Licence Agreement (EULA), for the software

EXPORT RESTRICTIONS

. You acknowledge that SOFTWARE is subject to U.S. export jurisdiction. You agree to comply

with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration

Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other governments.

UPGRADES AND RECOVERY MEDIA

DEVICE Software

. If the DEVICE Software is provided by SAGEM separate from the DEVICE on media such as a ROM

chip, CD ROM disk(s) or via web download or other means, and is labelled "For Upgrade Purposes Only", you may install

one copy of such DEVICE Software onto the DEVICE as a replacement copy for the existing DEVICE Software and use it

in accordance with this EULA, including any additional EULA terms accompanying the upgrade DEVICE Software.

COMPANION CD

. If any Companion CD component(s) is provided by SAGEM separate from the DEVICE on CD ROM

disk(s) or via web download or other means, and labelled "For Upgrade Purposes Only" , you may (i) install and use one

copy of such component(s) on the computer(s) you use to exchange data with the DEVICE as a replacement copy for the

existing Companion CD component(s).

RESPONSIBILITIES

SUPPORT AND INFORMATION

Should you have any questions concerning this EULA, or if you desire to contact SAGEM

]for any other reason, please refer to the address provided in the documentation for the DEVICE.

NO LIABILITY FOR CERTAIN DAMAGES

. EXCEPT AS PROHIBITED BY LAW, SAGEM SHALL HAVE NO LIABILITY FOR

ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM OR IN CONNECTION WITH

THE USE OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS

OF ITS ESSENTIAL PURPOSE.

FOR APPLICABLE LIMITED WARRANTIES AND SPECIAL PROVISIONS PERTAINING TO YOUR PARTICULAR

JURISDICTION, PLEASE REFER TO YOUR WARRANTY BOOKLET INCLUDED WITH THIS PACKAGE OR PROVIDED

WITH THE SOFTWARE PRINTED MATERIALS.

SAGEM™ is a trademark of SAFRAN.

Java™ and all Java™ based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the

U.S. and other countries.

The WAP navigator and some message softwares (i-mode) are under licence Openwave.

The WAP navigator and the softwares included are the exclusive property of Openwave. For this reason, it is forbidden to

modify, translate, disassemble or even decompile all or part of these softwares.

Wellphone™ and SmartCom™ are registered trademarks owned by SmartCom SARL France.

The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.

microSD™ is a trade mark of SD Card Association.

252338173_myX6-2a_en.book Page 52 Lundi, 10. octobre 2005 3:58 15

Java™ 53

Java™

You are the owner of a SAGEM mobile phone which gives you the ability to download applications and games to be

executed on your phone thanks to the built-in Java™ engine.

However, receiving applications from everywhere implies some basic knowledge of the possible effects of such

download.

Thank you for spending a few minutes reading these pages: this will prevent you from performing action without

measuring the consequences.

Security considerations

Java™ MIDP technology is an efficient way to provide powerful applications in mobile phones. It allows use, by "over the air"

downloaded applications or games, of the great features built-in in a mobile phone (SMS sending and receiving, multimedia

playback and recording, network access…).

All these MIDP 2.0 features cannot be simply exposed to any MIDlet installed in the handset: a careful access control system

is implemented in the device to protect your private data and airtime consumption.

Access controls are gathered in 9 security groups:

-Network access (GPRS/GSM data airtime consumption, HTTP/web connections…)

-Auto invocation (MIDlet can wake up at a given time or when receiving a SMS)

-Phone call (ability to initiate a phone call)

WARNING:

When running a Java™ application, you may be prompted to grant access to protected features. These

features are protected because using them could incur you cost, or involve your personal data. Read the security

popup message carefully, to understand what feature is requested, and decide whether it is legitimate for the

application to perform it. In case of doubt, don't hesitate to refuse access by selecting the "No" button!

The security configuration menu is an expert feature

! You must know exactly what you are doing before attempting

to change security parameters of a MIDlet. Misunderstanding changes may render MIDlet non functional

and/or lead to higher risks for your private data or impact your airtime consumption. Any changes in the

security configuration are done under your responsibility. In no case shall Sagem Communication and/or your

network provider be liable for any damages deriving from or arising out of such changes in the security

configuration.

You must be aware that applications downloaded to your phone could cause the phone to perform actions for which

you will be billed, like making calls and sending SMS. Depending on your operator's billing policy, you may also be

charged to download the application because of airtime consumption.

252338173_myX6-2a_en.book Page 53 Lundi, 10. octobre 2005 3:58 15

54 Java™

-Local connectivity (IrDA or serial interfaces use by the MIDlet)

-Messaging receive (SMS,SMS-CB interception by a MIDlet)

-Messaging sending (SMS sending by a MIDlet)

-Read User data (Subscriber identity, Phonebook, Agenda read access from a MIDlet)

-Write User data (New phonebook or agenda entry)

-Multimedia recording (ability to control camera or microphone from a MIDlet)

According to the security status of an installed MIDlet (see below), each of these security groups has one among 5 possible

authorizations levels (listed from the more restrictive to the more permissive):

-Never

The security group completely prevents access to the protected features.

-Per use

Each time MIDlet tries to use protected feature, user is prompted to grant access.

-Per session

First time a MIDlet uses a protected function, user is prompted to grant access like in "Per use" authorization but access

is granted until the MIDlet terminates.

-Single confirmation

The first time in the whole MIDlet life a MIDlet uses a protected feature, user is prompted to grant access. It remains valid

until the MIDlet is removed from the handset.

-Always

The security group unconditionally grants access to protected features.

A MIDlet has a security status which is either "uncertified", or else "certified".

An "uncertified" status means that the source of the MIDlet could not be verified by the mobile phone at installation time. As

far as the phone knows, the MIDlet could have been written by anyone.

A "certified" status means that the MIDlet was digitally signed by a known party, whose name is displayed by the mobile

phone. This means that the mobile phone successfully authenticated the named party as the source of the MIDlet.

Security permissions are different for "uncertified" or "certified" MIDlets, and may be different for different sorts of named

parties. Usually "uncertified" security permisions are more restrictive than "certified" ones.

Security configuration menu

When a MIDlet is installed in the mobile phone, default security authorizations are applied.

This default security configuration may be altered through the "Settings/Security" menu of an installed MIDlet.

Once in the "Security" menu, the security status of the MIDlet is displayed (see "Security considerations" paragraph above).

If you do not want to enter the security menu, simply select "Back" button.

You can proceed by selecting "Ok" button.

The menu displayed allows you to increase or decrease permissions currently applied to the current MIDlet for each of the

security groups.

252338173_myX6-2a_en.book Page 54 Lundi, 10. octobre 2005 3:58 15

Java™ 55

When you set a more permissive authorization to a security group than the current value, mobile phone asks you to

confirm your increased risk exposure.

The maximum risk exposure increase is limited by the security status. Depending of the manufacturing configuration, it

means, for example, that "Net Access" security group authorization cannot be set to a permissive value higher that "Session"

for an "uncertified" MIDlet ("Single confirmation" and "Always" are unavailable in the security configuration menu) but an

operator "certified" MIDlet may have all permission values available without any limitations.

What is Java™?

Java™ is a new technology enabling use of powerful applications in the mobile phone area. Business

applications and games are easily downloadable by the end-user on a Java™ featured handset.

Your mobile phone is a MIDP 2.0 compliant Java™ platform which implements WMA (SMS support)

and MMAPI (Multimedia support) options, providing an exciting environment to run highly graphical,

networked and intuitive MIDP applications.

Such applications may be, for example, a wide range of games and appealing applications like action

and logic games, agenda, e-Mail reader, Web browser…

What is a MIDlet?

A Java™ application or a game designed to run in a mobile phone is named a MIDlet (MIDP applet).

A MIDlet is usually made of 2 files:

-The JAD file

-The JAR file

JAD file stands for

ava™

pplication

escriptor. It is a small file describing the content of a JAR file

(version, vendor name, size…) and displayed by the mobile phone.

JAD file size is usually less than

2 kilo-bytes large.

JAR file stands for

ava™

rchive. It refers to the application data themselves (program, images, sound).

A JAR file may

be up to 200 kilo-bytes large.

NOTE:

In rare circumstances, MIDlet vendors may provide no JAD file and the MIDlet is the JAR file alone. In such a case it

is your only responsibility to evaluate the risk to download the JAR file without possibility of consulting the JAD file.

Downloading a MIDlet (Java™ game or application)

MIDlets are easily downloaded in the mobile phone through the Games or Applications menus or through the WAP browser.

In almost all cases, you will first receive a JAD file which will be displayed on the screen.

Much care must be given in examining the content of the file as explained further.

When you select a JAD file, your mobile phone downloads it, displays data contained and prompts you to acknowledge the

JAR file download.

252338173_myX6-2a_en.book Page 55 Lundi, 10. octobre 2005 3:58 15

56 Java™

The popup displays information below:

-Name of the MIDlet

-Version

-Size (JAR file size)

-Vendor name

-Security status (

IMPORTANT:

see "Security considerations" paragraph below)

-JAR file URL.

If you do not want to download the main data (JAR file), you shall refuse to acknowledge further airtime consumption by

selecting "Cancel" (JAR file is not downloaded).

If you agree on the MIDlet installation, just select "Ok". The MIDlet is installed with security levels set to default values

associated with its security status.

Before downloading an application, such a message may appear: "Your handset cannot identify the application, please be

sure of the source of the application before installing the application".

You shall read carefully the next two paragraphs to fully understand Java™ MIDP security concerns.

Trademarks

Java™ and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and

other countries.

Disclaimer

As explained hereabove, some downloaded items may contain data or may induce actions which may cause malfunctioning

of your mobile phone or loss or corruption of data or abnormal increase of your airtime consumption.

YOU EXPRESSLY ACKNOWLEDGE THAT THE DOWNLOAD OF ANY APPLICATIONS INCLUDING JAVA

APPLICATIONS OR GAMES IS DONE UNDER YOUR EXCLUSIVE RESPONSIBILITY. IN NO EVENT SHALL

SAGEM COMMUNICATION, YOUR NETWORK SERVICE PROVIDER OR THEIR AFFILIATES BE LIABLE FOR ANY

LOST PROFITS OR COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, LOSS OF PROFITS,

INTERRUPTION OF BUSINESS, LOSS OF DATA OR FOR ANY SPECIAL, INDIRECT, INCIDENTAL, ECONOMIC, OR

CONSEQUENTIAL DAMAGES ARISING UNDER CONTRACT, TORT, NEGLIGENCE, OR OTHER THEORY OF LIABILITY

RELATING TO THE DOWNLOAD OF ANY APPLICATION BY ANY MEANS, INCLUDING JAVA APPLICATIONS OR

GAMES IN SAGEM DEVICES. YOU EXPRESSLY ACKNOWLEDGE THAT ANY APPLICATIONS INCLUDING JAVA

APPLICATIONS OR GAMES ARE PROVIDED STRICTLY "AS IS". SAGEM COMMUNICATION AND/OR YOUR NETWORK

SERVICE PROVIDER EXTEND NO WARRANTY WHATSOEVER THERETO. SAGEM COMMUNICATION AND/OR YOUR

NETWORK SERVICE PROVIDER DISCLAIM ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY OF

MERCHANTABILITY, FITNESS OF ANY APPLICATIONS INCLUDING JAVA APPLICATIONS OR GAMES FOR A

SPECIFIC PURPOSE, SATISFACTORY QUALITY, SECURITY OR OTHERWISE.

252338173_myX6-2a_en.book Page 56 Lundi, 10. octobre 2005 3:58 15

Troubleshooting 57

Troubleshooting

It is impossible to switch the phone on

Remove and replace the battery.

If you still cannot switch the phone on, charge the battery:

-Put it on charge for at least 15 minutes before switching it back on again.

-Check if the battery icon is scrolling up and down.

-If so, the phone is charging.

-If not, please take the charger out and put it back on again. Please check that the charging icon is scrolling up and down.

-If you still cannot switch the phone on, please disconnect the charger, put it back on again and please repeat that

manipulation several times.

-If the charging icon is still not scrolling up and down, please contact your after-sales services.

-When the charging icon has stopped scrolling up and down, the battery is charged.

SIM not present

Check if the SIM card is present and properly positioned / inserted.

Check the condition of the SIM card. If damaged, please go back to the operator's shop for advice. Contact your after-sales

service if the message persists.

Incorrect PIN code

An incorrect PIN code has been entered. Be careful! Three incorrect PIN codes will block the SIM Card.

SIM BLOCKED

You have entered three incorrect PIN codes.

Enter your PUK code to unblock your SIM Card.

You must enter: **05*PUK*PIN*PIN#

You must enter the PUK code (Personal Unblocking Key) given by your network provider.

10 errors will permanently block your SIM Card. You must then contact your network provider to get a new one.

SIM LOCKED

In certain cases, the handset can only be used with some types of SIM cards. This message means that the SIM card you

are using does not fit with the phone. Take the SIM card out, and switch it back on. If the message

SIM not present

appears on the screen, you will need to check its compatibility next to the place where you bought it. If not, please contact

your after-sales service.

252338173_myX6-2a_en.book Page 57 Lundi, 10. octobre 2005 3:58 15

58 Troubleshooting

No call connection

Check that the number you have dialled is correct.

If the letter R is displayed on the top right corner of the screen, without any network name displayed, only emergency

services can be called.

Check the status of your credit.

Check that the SIM Card you are using offers the service you are requesting; check if its validity has not expired.

Check and deactivate the outgoing calls restriction when necessary.

The network could be saturated. Try later.

If the problem persists, please contact your Technical Helpdesk.

No receiving calls

Try to make a call in order to check that the phone and the network are operational.

Check and deactivate the permanent call forwarding (permanent call forwarding icon displayed on the screen).

Check and deactivate the incoming calls restriction when necessary.

If the problem persists, please contact your Technical Helpdesk.

Quality reception when calling

Avoid placing your fingers on the top of the phone, where the aerial is integrated: the phone will have to use full strength to

establish a quality transmission.

Impossible to send message

Check that the message centre number is correctly entered.

To do so, please select the menu

Messages

, select

Options

, select

MSG centre n°

and check the number entered.

Please contact your network provider to get this number.

No voicemail

Check that your subscription does offer this service.

Program the call to be forwarded to voicemail using the information provided by the operator.

Try to make a call to check that phone and network are operational.

Check if the voicemail number is properly configured. To do so, go to the

Settings

Calls

menu, select

Voicemail

and

check the number. Otherwise, enter your operator’s voicemail number.

Operator name does not appear on screen

Go into the

Settings

menu, select

Networks

, then

Selection

. Wait until the operator appears, select it and validate.

If the Operator logo is present (depending on model), activate the display (

Settings/Operator logo

How can I increase the efficiency of my phone?

Activate the eco mode (see

Settings/Energy saving

252338173_myX6-2a_en.book Page 58 Lundi, 10. octobre 2005 3:58 15

Warranty 59

Warranty

You must always use your phone for the purpose for which it was designed, under normal operating conditions. Sagem

Communication declines all responsibility for any use outside of the scope of its designed purpose and for any consequences

of this use.

The software program developed by SAGEM remains the exclusive property of Sagem Communication. It is therefore highly

prohibited to modify, translate, de-compile or disassemble this software program or any part thereof.

Usage precautions

Your phone allows you to download ring tones, icons and animated screensavers. Some of these items may contain data that

may cause malfunctions of your phone or data losses (virus for example).

For this reason, Sagem Communication rejects all responsibility concerning (1) the reception of downloaded data or losses

of the said data, (2) the impact on the operation of the phone and (3) damages resulting from receiving the said downloaded

data or loss of said data. In addition, Sagem Communication states that a failure caused by receiving downloaded data that

do not comply with the specifications set by Sagem Communication is excluded from the warranty. Consequently, the

diagnosis and repair of a phone infected by the said downloaded data will be at the expense of the customer.

Any content that you download to your phone may be protected by copyright belonging to third parties and consequently you

may not have the right to use this content or its use may be restricted. Consequently it is up to you to ensure that you have

permission, such as under the terms of a license agreement, to use any content that you download. Furthermore, Sagem

Communication does not guarantee the accuracy nor the quality of any content that you download. You alone are responsible

for the content that you download to your mobile phone and how you use it. Sagem Communication cannot be held

responsible for this content nor for its use.

It is your responsibility to ensure compliance, at your own expense, with the laws and regulations applicable in the country

where you use your phone.

Warranty conditions

Whenever you wish to make use of the warranty, please contact your vendor and present him with the purchasing paperwork

that he gave you.

If a fault occurs, he will advise you.

The new phone (excluding consumables), including new accessories bundled with the phone, are guaranteed by Sagem

Communication, parts and labour (apart from travel) against any manufacturing fault for a period of twelve (12) months with

effect from the sale of the phone to the customer, on presentation of the paperwork stating the purchase date of the phone.

Phones that have been repaired or replaced as standard during the warranty period stated above are guaranteed (parts and

labour) until the later of these two dates:

252338173_myX6-2a_en.book Page 59 Lundi, 10. octobre 2005 3:58 15

60 Warranty

Expiry of the guarantee period of twelve (12) months stated above or three (3) months with effect from the date of support

provided by Sagem Communication.

Your legal rights under the terms of applicable national law as well as your rights in relation to your retailer, as set out in the

sales contract, remain applicable and are not in any way affected by this guarantee.

In any disputes, the phone is covered by the legal warranty against the consequences of faults or hidden defects in

compliance with articles 1641 and subsequent of the French civil code.

All faulty phones under warranty will be replaced or repaired free of charge at Sagem Communication's option (with the

exclusion of repair of any other damage), once it has been specified that the work required for the application of the warranty

will be done in a workshop and that the return costs (transport and insurance) of the phone to the address to be indicated to

it by the Sagem Communication after-sales service, whose phone number will appear on the delivery note, will be charged

to the customer.

Subject to essential legal provisions, Sagem Communication does not accept any warranty, explicit or implicit, other than the

warranty provided expressly in this chapter, nor shall Sagem Communication accept responsibility for any immaterial and/or

indirect damages (such as loss of orders, loss of profit or any other financial or commercial damage) under the warranty or not.

The acceptance of a phone under warranty demands that a purchase document that is legible and without modi-fication,

stating vendor's name and address, date and place of purchase, type of phone and IMEI, are attached to the warranty, and

that the information on the phone identification label is legible and that this label or any other seal has not been tampered with.

The warranty applies in normal conditions of use.

Prior to sending the phone for repair, it is the customer's responsibility to backup at his expense the customized data stored

in the phone (phonebook, settings, wallpapers). A list of backup facilities can be provided by Sagem Communication on

request. The responsibility of Sagem Communication cannot be invoked if damage occurs to customer files, programs or

data. The information or operating elements and the contents of files will not be re-installed in any case in the event of loss.

Sagem Communication may decide, at its option, to repair the phone with new or reconditioned parts, replace the phone with

a new phone or, in any dispute, a phone in good working condition. During its work Sagem Communication reserves the

facility to make, where necessary, any technical modifications to the phone where these modifications doe not adversely

affect its initial purpose.

Faulty parts to be replaced during a repair under warranty will become the property of Sagem Communication.

The phone repair and standstill time during the warranty period may not lead to an extension of the warranty period as stated

in article 1 above, provided no other vital provisions have been agreed.

The application of the warranty is subject to the full payment of the sums due for the phone when the request for support is

made.

252338173_myX6-2a_en.book Page 60 Lundi, 10. octobre 2005 3:58 15

Warranty 61

The following are excluded from the warranty:

Breakdowns or malfunctions due to non-compliance with the installation and use instructions, to an external cause of the

phone (shock, lightning, fire, vandalism, malice, water damage of any type, contact with various liquids or any harmful agent,

unsuitable electric current...), to modifications of the phone made without the written consent of Sagem Communication, to a

servicing fault, as described in the documentation supplied with the phone, to lack of supervision or care, to poor

environmental conditions of the phone (especially temperature and hygrometry, effects of variations in electric voltage,

interference from the mains network or earth) or even due to a repair, a call-out (opening or trying to open the phone) or to

servicing done by personnel not approved by Sagem Communication.

Damage resulting from inadequate packaging and/or poor packing of the phone sent back to Sagem Communication.

Normal wear and tear of the phone and accessories.

Communication problems linked with a poor environment, especially:

Problems accessing and/or logging onto the Internet, such as breakdowns of the access network, the failure of the

subscriber's or his correspondent's line, transmission fault (poor geographic coverage by radio transmitters, interference,

disturbance, fai-lure or poor quality of phone lines...), a fault inherent to the local network (cabling, file server, user phone)

and/or transmission network fault (interference, disturbance, failure or poor quality of the network...).

Change of parameters of the cellular network made after the phone was sold.

Supply of new software versions.

Current servicing work: delivery of consumables, installation or replacement of these consumables...

Call-outs for phone or software modified or added without the written consent of Sagem Communication.

Faults or disruptions resulting from the use of products or accessories not compatible with the phone.

Phones returned to Sagem Communication without having complied with the return procedure specific to the phone cove-red

by this warranty.

The opening or closing of a SIM operator key and call-outs resulting in the non-operation of the phone resulting from the

opening or closing of SIM operator key done without the agreement of the original operator.

In the cases of warranty exclusion and of expiry of the warranty period, Sagem Communication shall draw up an estimate to

be given to the customer for acceptance before any call-out. The repair and carriage costs (there and back) given in the

accepted estimate will be charged to the customer.

These provisions are valid unless a special written agreement has been made with the customer. If one of the provisions turns

out to infringe a legally essential rule that consumers could have the benefit of under the national legislation, this provision

will not be applied, but all other provisions will remain valid.

252338173_myX6-2a_en.book Page 61 Lundi, 10. octobre 2005 3:58 15

62 Index

Index

Accessories 8

Activating your phone 13

Alarm 35

Anonymous mode 41

Battery

Charging the battery 17

Installing the battery 10

Beeps 38

Bluetooth 25, 27, 29

Business card 20

Calculator 35

Calendar 37

Call barring 43

Calls 15

Calls (menu)

Automatic redial 41

Call forward 40

Call waiting 41

Counters 41

Display number 41

View last calls 41

Camera 25, 45

Car kit 30

Confidentiality 43

Connectivity 29

Contact 18, 25

Call 18

Delete 19

Mailing list 20

Modify 19

Contacts 13, 29

Converter 35

Cost 44

Currencies 36

Date / Time 38

Display 39

Energy saving 40

Fixed dialling 44

Games 34

Getting started 13

Ghosts 28

GPRS 33

Hands-free mode 15

Help 45

Icon 12

Idle screen 12

Infrared 29

Input modes 21

IrDA 25, 27, 30

Languages 38

Local information 24

252338173_myX6-2a_en.book Page 62 Lundi, 10. octobre 2005 3:58 15

Index 63

Memory 24

Memory card 28

Messages

Compose SMS 21

Drafts 23

Inbox 23

Outbox 23

Receiving messages 22

Templates 23

MMS 25, 27

Music player 31

Navigator 9

Network 14

Networks 42

Operator 43

Operator logo 40

Organiser 29

Phone code 43

Phonebook 20, 40

Memory 19

New contact 18

Using the phonebook 18

Photo 25, 29, 45

Picture 28, 29

PIN number 42

PIN2 number 43

Programmable keys 9

Ring tones 38

Safety information 46

Screensaver 39

Security 42

Sentbox 23

Serial cable 29

Serial speed 30

Shortcut keys 45

Silent mode 38

SIM card 10, 13

SMS 21

Sound 29

Sounds 28

T9 21

Timer 35

To Do 29

ToDo 36

Troubleshooting 57, 58

USB cable 29

Vibrate 38

Video 27, 28, 29, 45

Voicemail 42

WAP 32, 33

Downloading objects 33

WAP logging off 33

WAP logging on 33

WAP settings 44

Warranty 59

Wellphone 29

Wellphone CD 8

252338173_myX6-2a_en.book Page 63 Lundi, 10. octobre 2005 3:58 15

Mobile Communication Business Group

www.sagem.com/mobiles

Le Ponant de Paris - 27, rue Leblanc - 75512 PARIS CEDEX 15 - FRANCE

Société Anonyme

Capital 300 272 000 € - 480 108 158 RCS PARIS

10/2005

252338173_myX6-2a_en.book Page 64 Lundi, 10. octobre 2005 3:58 15

Sagem Wireless MYX62A GSM 850/1800/1900 Mobile Phone with BT User Manual 252338173 myX6 2a en

Sagem Wireless GSM 850/1800/1900 Mobile Phone with BT 252338173 myX6 2a en

User Guide

Navigation menu

Namespaces

Views

Navigation