Sagem Sagemfast 1500 Users Manual

2015-02-04

• SAGEM F@st TM 1500 SAGEM F@st TM 1500WG
  • Contents
• 1. Introduction
  • 1.1 About the SAGEM F@st TM 1500WG ADSL Router
  • 1.2 Features and Benefits
  • 1.3 Applications
  • 1.4 Composition of the supply
  • 1.5 Prerequisites
• 2. Description and Physical installation
  • 2.1 Hardware Description
    • 2.1.1 Front panel
    • 2.1.2 Rear panel
  • 2.2 Physical Installation
    • 2.2.1 Installation instructions
    • 2.2.2 Desktop Installation
  • 2.3 Settings and Connecting
    • 2.3.1 ISP settings
    • 2.3.2 Install the SAGEM F@st TM 1500 ADSL Router
    • 2.3.3 Connect the ADSL Line
    • 2.3.4 Phone Line Configuration
    • 2.3.5 Attach to Your Network Using Ethernet Cabling
    • 2.3.6 Connect the Power Adapter
  • 2.4 Powering up the SAGEM F@st™ 1500 ADSL router
• 3. Configuring Client Computer
  • 3.1 TCP/IP Configuration
  • 3.2 Configuring your Windows computer
    • 3.2.1 On Windows 98 / Me
    • 3.2.2 On Windows NT 4.0
    • 3.2.3 On Windows 2000
    • 3.2.4 On Windows XP
  • 3.3 Configuring your Mac computer
• 4. Configuring the SAGEM F@st™ 1500 ADSL router
  • 4.1 STATUS
  • 4.2 "SETUP WIZARD" menu
    • 4.2.1 PPP Setting
    • 4.2.2 Channel and SSID
    • 4.2.3 WEP
    • 4.2.4 Access Control
  • 4.3 SYSTEM
    • 4.3.1 Time Settings
    • 4.3.2 Password Settings
    • 4.3.3 Configuration tools
    • 4.3.4 Firmware Upgrade
    • 4.3.5 Reset
  • 4.4 "WAN" menu
    • 4.4.1 ATM PVC
    • 4.4.2 Clone MAC
  • 4.5 LAN
    • 4.5.1 VLAN
    • 4.5.2 DNS
  • 4.6 Wireless
    • 4.6.1 Channel and SSID
    • 4.6.2 Access Control
    • 4.6.3 Security
    • 4.6.4 WEP
    • 4.6.5 WPA
    • 4.6.6 802.1X
  • 4.7 NAT
    • 4.7.1 Address Mapping
    • 4.7.2 Virtual Server
    • 4.7.3 Special Application
    • 4.7.4 NAT Mapping Table
  • 4.8 Firewall
    • 4.8.1 Access Control
    • 4.8.2 MAC Filter
    • 4.8.3 URL Blocking
    • 4.8.4 Schedule Rule
    • 4.8.5 Intrusion Detection
    • 4.8.6 DMZ
  • 4.9 Route
    • 4.9.1 Static Route
    • 4.9.2 RIP
    • 4.9.3 Routing Table
  • 4.10 QoS
    • 4.10.1 Traffic Mapping
    • 4.10.2 Traffic statistics
  • 4.11 Advanced
    • 4.11.1 ADSL
    • 4.11.2 Remote Management
    • 4.11.3 SNMP
    • 4.11.4 UPnP
    • 4.11.5 DDNS
  • 4.12 Finding the MAC address of a Network Card
• A. Appendix A - Troubleshooting
• B. Appendix B - Safety warnings
  • B.1 Safety warnings
    • B.1.1 Safety levels on the mains adapter unit
    • B.1.2 Safety levels on the SAGEM F@st™ 1500 unit
  • B.2 CE declaration of conformity
• C. Appendix C - CABLES
  • C.1 Ethernet cable
    • C.1.1 Specifications
    • C.1.2 Wiring Conventions
    • C.1.3 RJ-45 Port Connection
    • C.1.4 Pin Assignments
  • C.2 ADSL Cable
    • C.2.1 Specifications
    • C.2.2 Wiring Conventions
• D. Appendix D - Technical specifications
  • D.1 Mechanical Characteristics - Displays
  • D.2 Electrical Characteristics
  • D.3 Soft Component Features
  • D.4 Radio Features
  • D.5 Environmental characteristics
• E. Appendix E - Default configuration
  • E.1 Default user name and password for HTTP access
  • E.2 Default language for HTTP User Interface
  • E.3 Default configuration on the local area network side
  • E.4 Default configuration on the wide area network side
  • E.5 Default configuration for advanced functions