Saitek Electronics PP19-1 P2900 Wireless Pad (Game Pad Unit) User Manual

Download:
Mirror Download [FCC.gov]
Document ID	595202
Application ID	sKIugbE0ZLy41eAX50jNLg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	34.33kB (429113 bits)
Date Submitted	2005-10-25 00:00:00
Date Available	2005-10-25 00:00:00
Creation Date	2005-09-08 12:14:52
Document Lastmod	2005-09-08 12:15:14
Document Title	User Manual
Document Creator	HP 9100C Digital Sender
Document Author:	BEN HO

P29001nstall Manual Page 1 of8
P2900 WIRELESS PAD
GETTING STARTED
Installation for Users of Windows® XP
A) Drivers Only For Typical Users
1. With your computer switched on, close down any programs that are currently running
and insert the Saitek Smart Technology CD into your CD—ROM drive.
2. When the Introduction Screen appears, click Install Software to continue. If the CD
does not run automatically, select Start from the Windows® Taskbar, then Run and
type D:\Setup.exe and click OK — where D:\ is letter of your CD-ROM drive.
3, When the Welcome screen appears, click Next to continue.
4. After reading the Disclaimer, select the I accept the terms of the Disclaimer option
and click Next to continue.
5. At the Driver Setup screen, if you haven’t already done so, plug the USB cable of your
docking station into one of your computer‘s USB ports and click on Next.
6. At the Driver Setup screen, click Next to test your controller.
7. When the Saitek Controller screen appears, try out all your controller‘s buttons and
controls to show that it is working properly. When you have finished, click OK.
8. At the Software Setup screen, select Do not install the SST Programming
Software and click Next. The Programming Software can be installed at a later date
by following instruction (B). below
9. At the Registration screen, select check this box to register now and follow the on-
screen instructions, or you can choose to select this option later.
10. Click on Finish to complete the installation.
B) Drivers and Programming Software For Advanced Users
Follow points 1 — 7 of the install procedure in A), then at the Software Setup screen, select
Install the SST Programming Software and click Next.
in the following Software Setup screen, click Next and follow the on-screen instructions, At
this point you will be asked to install such features as the Saitek Magic Mouse, HID-
compliant mouse, Saitek Magic Keyboard and HID Keyboard Device (these are what XP
calls the various elements of your Saitek controller). Continue to click on Next and Finish
to accept the installation until the Registration screen appears.
At the Registration screen, select Check this box to register now and follow the on-
screen instructions, or do not select this option and register later.
Upon completion of the installation, you have the option to Run Profile Editor, which will
give you a view of the 3D programming environment. If you do not wish to see the Profile
Editor at this point, just uncheck the box and click on Finish to complete the installation.
Installation for Users of Windows® 2000
A) Drivers Only For Typical Users
1. With your computer switched on, close down any programs that are currently running
and insert the Saitek Smart Technology CD into your CD—ROM drive.
2. When the Introduction Screen appears, click Install Software to continue. If the CD
file://C:\Documents%20and%20Settings\tmng\Local%ZOSettings\Temporary%201nter... 02/09/2005
P2900 Install Manual Page 2 of8
does not run automatically, select Start from the Windows® Taskbar, then Run and
type D:\Setup.exe and click OK - where D:\ is letter of your CD-ROM drive.
When the Welcome screen appears, click Next to continue.
After reading the Disclaimer, select the I accept the terms of the Disclaimer option
and click Next to continue.
At the Device Driver Installation screen, click on Next and follow the on-screen
instructions.
6. When prompted, plug the USB cable of your docking station into one of your
computer‘s USB ports and click on Configure.
7. When the Controller Properties screen appears, click Next to view the Test screen.
8. Now try out all your controller’s buttons and controls to show that it is working
properly. When you have finished, click OK.
9. At the Programming Software screen, select Typical User and click Next.
10. At the Registration screen, select Register and follow the on-screen instructions or
select Register Later and click Next.
11, Click on Finish to complete the installation.
SPF.“
B) Drivers and Programming Software For Advanced Users
1. Follow points 1 — 8 of the install procedure in A), then at the Programming Software
screen, select Advanced User and click Next.
2. At the Programmable Controller Drivers screen, click Update and follow the on-
screen instructions.
Then at the Installation of programming software successful screen, click Next.
At the Registration screen, select Register and follow the on-screen instructions or
select Register Later and click Next.
5. Upon completion of the installation, you have the option to Run Profile Editor, which
will give you a view of the 3D programming environment. If you do not wish to see the
Profile Editor at this point, just uncheck the box and click on Finish to complete the
installation.
PW
IMPORTANT lNFORMATION
A Word on Driver Updates
From time to time there may be updates to the driver and programming software for this
product.
You can check for the latest software updates by visiting the Saitek website and clicking on
Downloads. A drop down menu will appear. Select Drivers and Software.
For Windows® XP users; Dynamic updates
If you are using the SST Programming software then you will need to obtain an updated
version to work with the new drivers that you have downloaded from Windows update. To
obtain the new version of the software, open the Game Controllers icon in Control Panel,
select the controller in the window and click Properties. At the top of the Properties window
click the About tab and you will see a link that says Click here to download the SST
Programming Software. Click on the link and Windows will give a download prompt
asking if you want to open the file or save it. Choose to save it to your preferred location on
your computer‘s hard disk and the file will start downloading. Once the file has downloaded,
find it on your hard disk and double click on it to install the programming software.
Enabling Your Controller in Game
Ii[c://C:\Documents%20and%20Settings\tmng\Local%ZOSettings\Tempora:y%201nter.,. 02/09/2005
P2900 Install Manual Page 3 of8
Most games support game controllers, which you can enable by using a [control] options
menu within the Main Menu of the game itself.
If you are having trouble working out how to do this or if you're unsure whether the game
being used supports game controllers, please refer to the user manual for that game for
more help.
How to Test your Controller
o You can do this at any time by Clicking on Start, then Settings and selecting Control
Panel in Windows (XP users may only need to click on Start and then Control
Panel)
0 Look for an icon called either Game Controllers or Gaming Options (XP users may
have to click Printers and Other Hardware first).
0 Open the Game Controllers/Gaming Options window then the name of your
controller should show up.
0 Click on Properties and this will bring up the test screen
0 Moving your controller and pressing the buttons should result in a response in this
screen; if there is a response you know that the controller is functioning correctly.
PROGRAMMING YOUR SAITEK CONTROLLER WITH SAITEK SMART TECHNOLOGY
PROGRAMMING SOFTWARE
Introducing Saitek Smart Technology Programming Software
Saitek Smart Technology Programming Software (SST) is the software Saitek supplies to
configure your Saitek controller for enhanced functionality. SST delivers a powerful set of
features, allowing you to program your device with the ultimate configuration for total
interaction. Despite a level of sophistication previously unseen in the market, and because
of the Saitek Smart Technology inside, the software remains simple and intuitive to use.
For a complete guide on how to program your Saitek controller, visit the Saitek website at
www.saitek.com.
Features of Smart Technology Programming Software:
0 Quick and easy setup in any game
Personalize the controller settings for your favorite games
Configure your controller with an on-screen BD model and interface
Multiple setup option for each controller - ideal if a controller is used by several people
Program special moves with sophisticated timing features
Special game setups available as ‘Profiles' from the Saitek website and on the Smart
Technology CD
o Download the latest version of Saitek Smart Technology software from the Saitek
website
coco.
What is a Profile
A Profile is a custom setup for improved gameplay — consisting ofa set of commands that
are pro-assigned to the buttons or axes of your controller. There are over two hundred pre-
written Profiles available on the Product Companion Disk that accompanies this device or
on the Saitek Website — www.saitek.com. (Please check the website for new or improved
Profiles. which are being added regularly).
file://C:\Documents%20and%205ettings\tmng\LocaI%2OSettings\Temporary%ZOInterm 02/09/2005
P2900 Install Manual Page 4 of8
How Do I Program My Controller?
After getting to know your controller, you can start creating your own personal Profiles with
the Saitek Smart Technology programming software (SST). This software has virtually
unlimited programming capabilities and allows you to customize the controller to your exact
gaming needs.
The Profile Editor allows you to program the buttons on your controller to perform different
actions within your games — this is especially useful if the game you are using does not
have its own screen that allows reconfiguring of your buttons.
Getting Started
1. Double-click on the Saitek Smart Technology icon the install left on your desktop
2. In the Profile Editor, choose the control to which you wish to assign a keyboard
command You do this by left-clicking on the control’s cell in the control list on the
right of the screen.
3. With the cursor flashing, type in the key commands and then click on the green tick
mark when complete.
4. Repeat this procedure for all the buttons you would like to program and then click File,
Save at the top of the Profile Editor window.
5. Give the profile a name (it is recommended you name it after the game for which the
profile is intended) and then click Save.
6. To enable the profile either click the Profile Now icon at the top of the Profile Editor (it
looks like a black and yellow crosshair) or right-click on the controller icon in your
taskbar and select the name of the profile from the pop-up list of options.
7. You will notice that when a profile is loaded that the controller icon in your taskbar has
a green square behind it, indicating that a profile is currently loaded. If you wish to
unload a profile simply right-click on the controller icon and click Clear Profile from
the pop—up list of options.
If you require more detailed assistance with using the SST Programming Software,
click on Help at the top of the Profile Editor and then Manual.
Technical Support
Can’t get your pad to work — don’t worry, we’re here to help you!
Nearly all the products that are returned to us as faulty are not faulty at all - they havejust
not been installed properly.
if you experience any difficulty with this product, please first visit our website
www.saitek.com. The technical support area will provide you with all the information you
need to get the most out of your product and should solve any problems you might have.
If you do not have access to the internet, or if the website cannot answer your question,
please contact your local Saitek Technical Support Team. We aim to offer quick,
comprehensive and thorough technical support to all our users so, before you call, please
make sure you have all the relevant information at hand.
To find your local Saitek Technical Support Center , please see the separate Technical
Support Center sheet that came packaged with this product.
Conditions of Warranty
tile://C:\Documents%20and%208ettings\tmng\Local%ZOSettings\Temporary%201nter... 02/09/2005
P2900 Install Manual Page 5 ofS
. Warranty period is 2 years from date of purchase with proof of purchase submitted.
. Operating instructions must be followed.
0 Specifically excludes any damages associated with leakage of batteries.
Note: Batteries can leak when left unused in a product for a period of time, so it is
advisable to inspect batteries regularly.
- Product must not have been damaged as a result of defacement, misuse, abuse,
neglect, accident, destruction or alteration of the serial number, improper electrical
voltages or currents, repair, alteration or maintenance by any person or party other
than our own service facility or an authorized service center, use or installation of non-
Saitek replacement parts in the product or the modification of this product in any way,
or the incorporation of this product into any other products, or damage to the product
caused by accident, fire, floods, lightning, or acts of God, or any use violative of
instructions furnished by Saitek plc.
a Obligations of Saitek shall be limited to repair or replacement with the same or similar
unit, at our option. To obtain repairs under this warranty, present the product and
proof of purchase (eg, bill or invoice) to the authorized Saitek Technical Support
Center (listed on the separate sheet packaged with this product) transportation
charges prepaid. Any requirements that conflict with any state or Federal laws, rules
and/or obligations shall not be enforceable in that particular territory and Saitek will
adhere to those laws, rules, and/or obligations.
0 When returning the product for repair, please pack it very carefully, preferably using
the original packaging materials. Please also include an explanatory note.
0 IMPORTANT: To save yourself unnecessary cost and inconvenience, please check
carefully that you have read and followed the instructions in this manual.
This warranty is in Lieu of all other expressed warranties, obligations or liabilities.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT
NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED lN DURATION TO
THE DURATION OF THIS WRITTEN LIMITED WARRANTY. Some states do not
allow limitations on how long an implied warranty lasts, so the above limitations may
not apply to you. IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL OR
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER
WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER Some states do not allow the
exclusion or limitation of special, incidental or consequential damages, so the above
limitation may not apply to you. This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state.
Information for Customers in the United States
FCC Compliance and Advisory Statement
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1 This device may not cause harmful interference, and:
2 This device must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
tiIe://C:\Documents%20and%20Settings\tmng\Local%20$ettings\Temporary%201nter... 02/09/2005
P2900 lnstall Manual Page 6 of8
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications However, there is no guarantee that interference will not occur in a
particular installation. if this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna;
- Increase the separation between the equipment and receiver:
' Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
~ Consult the dealer or an experienced radio/TV technician for help.
Saitek Industries, 2295 Jefferson Street, Torrance, CA 90501, USA
Canada 210
Operation is subject to the following two conditions:
1 This device may not cause interference, and;
2 This device must accept any interference, including interference that may cause undesired operation
of the device
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada,
Battery Information
1 AA battery (included)
Must be disposed of properly
~ May explode if damaged or disposed of in fire.
~ Do not short circuit
Do not recharge
Manufacturers Declaration of Conformity
Manufacturers address: Authorised representatives address:
Saitek Electronics (Shenzhen) Ltd Saitek plc
Da Bao Road 4 West Point Row
District 33 Great Park Road
Shenzhen Almondsbury
PRC Bristol
BS 32 4QG
United Kingdom
file://C:\D0cuments%20and%20Settings\tmng\Local%20$ettings\Temporary%201nter.n 02/09/2005
P2900 Install Manual Page 7 of8
Identification of Equipment:
Article No.: PP19
P2900 Wireless Gamepad
Intended usage:
For home use
Conformity specification:
Reference to European harmonised standards
EN60950:2000
EN 300 44012001
EN 301 489-312000
Technical Construction File Retz Pads/2005/PP19
The above equipment conforms to the essential requirements of the following directive:
1999/5/EC EC Radio and Telecom Terminal Equipment directive
The essential requirements the above equipment conforms to are:
Anicle 313 (Safety)
Article 3.1b (EMC)
Article 3.2 (Use of radio spectrum)
Limitations of frequency usage:
Countries in which this product may not be sold/used:
N/A
Signed: Martin Mannix
Position: Quality Manager
Date: 14 June 2005
Company: Saitek plc
Place: United Kingdom
file://C:\Documents%20and%2OSettings\tmng\Local%20$ettings\Temporary%2OInter... 02/09/2005
P2900 Install Manual Page 8 of8
fl
This symbol on the product or in the instructions means that your electrical and electronic
equipment should be disposed at the end of its life separately from your household waste
There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you
purchased the product.
fl
fl
©2005 Saitek Ltd. Made and printed in China.
All trademarks are the property of their respective owners.
fiIe1//C:\Documents%20and%20$ettings\tmng\Local%ZOSettings\Temporary%20[nter... 02/09/2005

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Modify Date                     : 2005:09:08 12:15:14+08:00
Create Date                     : 2005:09:08 12:14:52+08:00
Metadata Date                   : 2005:09:08 12:15:14+08:00
Creator Tool                    : HP 9100C Digital Sender
Format                          : application/pdf
Creator                         : BEN HO
Document ID                     : uuid:64be520b-1a7c-4c5b-8b82-0eec052c220f
Instance ID                     : uuid:9a6dfdf2-32e8-4ea0-92ab-3406900c148e
Page Count                      : 8
Author                          : BEN HO

EXIF Metadata provided by EXIF.tools