| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 315772 |
| Application ID | SIqqRfoYoxnskRLfecocBA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 51.52kB (643958 bits) |
| Date Submitted | 2003-04-04 00:00:00 |
| Date Available | 2003-04-04 00:00:00 |
| Creation Date | 0000-00-00 00:00:00 |
| Producing Software | HP Digital Sending Device |
| Document Lastmod | 2002-11-01 10:04:04 |
| Document Title | User Manual |
| Document Creator | HP Digital Sending Device |
Saflek
WIRELESS
ADAPTER
USER MANUAL
GETTING CONNECTED: iT’S EASY!
Before you start, make sure that your
Sony PlayStation®2 is turned OFF!
Install the Receiver into the game
console’s ports by lining it up carefully and
inserting it gently, but firmly. Now, power up the
PlayStation®2.
Locate the rechargeable batteries provided with
yourWireless Adapter,
and insert them into the CAUTION:
Power Pack. Do not recharge
standard Carbon Zinc
lMPORTANT: The Power or Alkaline batteries!
Pack must be charged
for at least 12 hours before the initial use! For
charging details, see Section 2. If you want to play
right away, insert 4 fresh AA batteries into the spare
cartridge, and slide the cartridge into the front of the
Hub. It will look into place when installed correctly.
Note that you can actually charge the Power Pack
While you re playing with the second set of batteries!
After installing the batteries, the Hub will start
communicating with the Receiver automatically.
All the Hub LEDs will flash in a circular pattern, along
with the Receivers green Signal/Scan LED. Once
communication has been established, the LEDs Will
stop flashing and the Receivers Signal/Scan LED will
remain on solid/y, as well as the Hub LEDs indicating
the current battery strength.
Plug up to 2 game controllers into Ports 1 and 2
of the Hub. The built—in auto-scan function allows 2
controllers to work at the same time by seeking out
different frequencies!
Next, decide where you want to play. You can
position yourself anywhere within about 10
metres (approximately 30 feet) of the console!
Time to start up one of your PlayStation® games and
have some fun!
FEATURES AND CONTROLS
RECEIVER
Pass-through Port
{with cover on)
Signal/
Scan
LED
(Power
Charge Pack)
Indicator LED
POWER PACK
(shown recharging
in Receiver and
attached to Hub)
(Power
Battery Level Pack)
Indicator LEDs Rumble Button
Scan
Button
(on back)
(z)
_—_—_——
1. BATTERY INFORMATION
Recharging the Power Pack
Your Receiver has the ability to recharge the Power Pack,
even while you’re playing with another set of batteries. The
recharging process is very convenient, as it’s accomplished
via the PlayStation®2 console, with no AC adapter required.
Simply plug the Power Pack (with the rechargeable batteries
installed) into the front of the Receiver, as pictured under
Features and Controls. The red Charge Indicator LED stays
on solidly while the Power Pack is being charged, and turns
off once the charge is complete. The charging process will
continue to take place as long as the PlayStation®2 remains
on. Note that a 2-hour charge will result in approximately 8
hours of play. For increased battery life, you may turn off the
rumble feature, as described in Section 2.
IMPORTANT: Use only the supplied or equivalent recharge-
able batteries in the Charger. Do not attempt to recharge
standard Carbon Zinc or Alkaline batteries!
Battery Level Indicators
The Battery Level Indicators allow you to keep track of the
remaining battery life at a glance. A fully
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.2
Linearized : No
Creator : HP Digital Sending Device
Create Date : 0000:01:01 00:00:00
Author :
Producer : HP Digital Sending Device
Title :
Subject :
Modify Date : 2002:11:01 10:04:04+08:00
Page Count : 9
EXIF Metadata provided by EXIF.tools