Saitek Electronics PS30-2 PS30 Cyborg Evo wireless dongle for PC User Manual 522904

Download:
Mirror Download [FCC.gov]
Document ID	522904
Application ID	JDiY3mmhrOlm8UcX6NgfSA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Microsoft Word - pdf
Filesize	9.54kB (119200 bits)
Date Submitted	2005-03-11 00:00:00
Date Available	2005-03-11 00:00:00
Creation Date	2005-03-11 15:53:34
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2005-03-11 15:53:34
Document Title	Microsoft Word - 522904.DOC
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

Cyborg evo Wireless User Manual
Getting Started
Features:
Battery
Your Cyborg evo Wireless uses one AA alkaline battery (supplied) which should give up
to 50 hours of use. To fit the battery, open the battery compartment on the bottom of
your joystick by sliding back the cover. Insert the AA battery in the direction shown and
replace the cover.
LED power status
The Saitek Cyborg evo Wireless features an LED (Light Emitting Diode) on the top of the
stick which shows how much power is left in the battery. A green light means there is
between 20-80% of power remaining; amber means there is between 10-20% power
remaining; and red means there is less than 10% power and you will soon have to
replace the battery.
Plugging in the wireless receiver
Unclip the wireless receiver (or dongle) from the bottom of the evo Wireless joystick and
plug into one of your computer’s USB ports.
Sleep mode
Your Cyborg evo Wireless features a sleep mode to conserve battery life. After ten
minutes of no activity, the stick will power down and the head LED will switch off. Press
any of the buttons to wake the stick.
Scan Button
In certain circumstances, there may be interference to the signal between your stick and
the wireless receiver dongle in your computer caused by other wireless devices nearby.
To switch to an interference-free wireless channel, press the scan button on the
underside of your stick once.
Radio frequency
The Cyborg evo Wireless operates at a frequency of 2.402 – 2.480 GHz
Installing joystick driver software
Important note: Calibrating your joystick
The Saitek Cyborg evo Wireless stick uses a dynamic auto-calibration system, which is
designed to give you more accurate control. To maximise the effectiveness of
calibration, ensure that the stick is moved fully forwards, backwards and to both sides
after booting up your PC and before loading up your game.
Installation for users of Windows® XP
a) Drivers only for typical users
The software on the CD supplied with this product has been thoroughly tested and
complies with all Microsoft standards. However, we recommend that prior to installing
any 3rd party software you create a restore point to return to should you encounter any
difficulties.
Windows®XP users can do this by clicking on Start followed by Programs, then
Accessories, System Tools and finally on System Restore. In the window that
appears select Create a restore point and then click on Next. You will be prompted to
supply a name for this set-up.
Should you then encounter any difficulties during the installation process you can follow
the same path to restore your PC to its pre-installed state.
With your computer switched on, close down any programs that are currently running
and insert the Saitek Smart Technology CD into your CD-ROM drive.
When the Introduction Screen appears, click Install Software to continue.
When the Welcome screen appears, click Next to continue. (If the CD does not run
automatically, select Start from the Windows® Taskbar, then Run and type
D:\Setup.exe and click OK - where D:\ is letter of your CD-ROM drive).
After reading the Disclaimer, select the I accept the terms of the Disclaimer option
and click Next to continue.
At the Driver Setup screen, plug in your wireless receiver dongle and click on Next.
At the Driver Setup screen, click Next to test your controller.
When the Saitek Controller screen appears, try out all your controller’s buttons and
controls to show that it is working properly. When you have finished, click OK.
At the Software Setup screen, select Do not install the SST Programming
Software and click Next. The Programming Software can be installed at a later date
by following instruction (b) below
9
At the Registration screen, select Check this box to register now and follow the
on-screen instructions, or you can choose to select this option later.
10 Click on Finish to complete the installation.
b) Drivers and programming software for advanced users
Follow points 1 – 7 of the install procedure in A), then at the Software Setup screen,
select Install the SST Programming Software and click Next.
In the following Software Setup screen, click Next and follow the on-screen
instructions. At this point you will be asked to install such features as the Saitek
Magic Mouse, HID-compliant mouse, Saitek Magic Keyboard and HID Keyboard
Device (these are what XP calls the various elements of your Saitek controller).
Continue to click on Next and Finish to accept the installation until the Registration
screen appears.
At the Registration screen, select Check this box to register now and follow the
on-screen instructions, or do not select this option and register later.
Upon completion of the installation, you have the option to Run Profile Editor, which
will give you a view of the 3D programming environment. If you do not wish to see
the Profile Editor at this point, just uncheck the box and click on Finish to complete
the installation.
Installation for Users of Windows® 2000
a) Drivers only for typical users
With your computer switched on, close down any programs that are currently running
and insert the Saitek Smart Technology CD into your CD-ROM drive.
When the Introduction Screen appears, click Install Software to continue.
When the Welcome screen appears, click Next to continue. (If the CD does not run
automatically, select Start from the Windows® Taskbar, then Run and type
D:\Setup.exe and click OK - where D:\ is letter of your CD-ROM drive).
After reading the Disclaimer, select the I accept the terms of the Disclaimer option
and click Next to continue.
At the Device Driver Installation screen, click on Next and follow the on-screen
instructions.
When prompted, plug your controller’s USB connector into your computer, then click
on Configure.
When the Controller Properties screen appears, click Next to view the Test screen.
8
Now try out all your controller’s buttons and controls to show that it is working
properly. When you have finished, click OK.
At the Programming Software screen, select Typical User and click Next.
10 At the Registration screen, select Register and follow the on-screen instructions or
select Register Later and click Next.
11 Click on Finish to complete the installation.
b) Drivers and programming software for advanced users
Follow points 1 – 7 of the install procedure in A), then at the Programming Software
screen, select Advanced User and click Next.
At the Programmable Controller Drivers screen, click Update and follow the onscreen instructions.
Then at the Installation of programming software successful screen, click Next.
At the Registration screen, select Register and follow the on-screen instructions or
select Register Later and click Next.
Upon completion of the installation, you have the option to Run Profile Editor, which
will give you a view of the 3D programming environment. If you do not wish to see
the Profile Editor at this point, just uncheck the box and click on Finish to complete
the installation.
Installation for Users of Windows® 98 and Me
a) Drivers only for typical users
With your computer switched on, close down any programs that are currently running
and insert the Saitek Smart Technology CD into your CD-ROM drive.
When the Introduction Screen appears, click Install Software to continue.
When the Welcome screen appears, click Next to continue. (If the CD does not run
automatically, select Start from the Windows® Taskbar, then Run and type
D:\Setup.exe and click OK).
4
After reading and accepting the Disclaimer, click Next to continue.
Note: For your controller to work, you must have a minimum of Microsoft® DirectX®
8.1 installed on your computer. The installer will automatically recognize if this
software needs to be added, and will allow you to install it directly from the Saitek
Product Companion CD, if necessary.
If you are asked to install Microsoft® DirectX® 8.1, click Install and follow the onscreen instructions, and then restart your computer when prompted. Make sure that
you leave the Saitek CD in the drive when restarting. After this software has been
installed, you will automatically be taken to the installation to continue with the next
step.
Follow the on-screen instructions and select Yes, I want to restart my computer
now when prompted.
After the restart, at the Device Driver Installation screen, click on Next and follow the
on-screen instructions.
When prompted, plug your USB connector into your computer.
When the Controller Properties screen appears, click Next to view the Test Screen.
9. Now try out all your controller buttons and controls to show that it is working properly.
When you have finished, click OK.
10. At the Programming Software screen, select Typical User and click Next.
11. At the Registration screen, select Register my Saitek controller online, click Next
and follow the on-screen instructions or select Register Later and click Next.
12. Click on Finish to complete the installation.
b) Drivers and programming software for advanced users
1. Follow points 1 – 8 of the install procedure in A), then at the Programming Software
screen, select Advanced User and click Next.
2. At the Programmable Controller Drivers screen, click Update and follow the onscreen instructions. At this point you will be asked to insert your Windows® CD,
however, DO NOT do this, just click on OK. At the next screen, type
C:\windows\system into the prompt and click OK and follow the on-screen
instructions.
3. At the Installation of programming software successful screen, click Next.
4. At the Registration screen, select Register my Saitek controller online, click Next
and follow the on-screen instructions or select Register Later and click Next.
5. Upon completion of the installation, you have the option to Run Profile Editor, which
will give you a view of the 3D programming environment. If you do not wish to see
the Profile Editor at this point, just uncheck the box and click on Finish to complete
the installation.
Note: Driver updates
From time to time there may be updates to the driver and programming software for this
product.
You can check for the latest software updates by visiting the Saitek website and clicking
on Downloads. A drop down menu will appear - Select Drivers and Software.
For Windows® XP users; Dynamic updates
You can check for Driver updates using Windows update. Click on Start on the bottom
left hand corner of your monitor and then select Windows Update from the menu. Click
on Driver Updates then select from any of the update options that appear in the centre
of the window. When you have selected the relevant file to download go to the left hand
side of the window and select Review and Install Updates. Finally click on Install Now
from the centre section.
Testing your joystick
•
You can do test your stick at any time by Clicking on Start, then Settings and
selecting Control Panel in Windows (XP users may only need to click on Start and
then Control Panel)
•
Look for an icon called either Game Controllers or Gaming Options (XP users may
have to click Printers and Other Hardware first).
•
Open the Game Controllers/Gaming Options window then the name of your
controller should show up.
•
Click on Properties and this will bring up the test screen.
•
Moving your controller and pressing the buttons should result in a response in this
screen; if it's responding in there then you know that the controller is okay.
Enabling your controller in game
Most games support game controllers, which you can enable by using a [control] options
menu within the Main Menu of the game itself.
If you are having trouble working out how to do this or if you're unsure whether the game
being used supports game controllers, please refer to the user manual for that game for
more help.
Note: Even if the game you are using does not support game controllers, it is possible to
make the controller work in that game using the Saitek Smart Technology programming
software (only installed if you chose to be an Advanced User when installing). Using the
programming software allows you to program your controller with keyboard and mouse
commands, enabling it to work in those games that only have support for keyboards and
mice. For help using this powerful programming software, consult the Programming Your
Saitek Controller with Saitek Smart Technology Programming Software section in this
manual.
Troubleshooting
Q: I haven’t used my Cyborg evo Wireless joystick for some time, there are no LEDs
illuminated and the joystick doesn’t work.
A: Replace the battery on the underside of the joystick.
Q: My computer is not recognizing my Saitek joystick – what’s wrong?
A: 1. Have you installed the drivers on the CD supplied with this product?
2. Check the connections. Unplug the wireless receiver dongle controller and plug it
back in, making certain that it is securely attached.
3. Have you tested your controller? Please refer to the "How to Test Your Controller"
section in this manual for further information
Q: The game I am playing does not recognize my controller - what's wrong?
A: 1. Ensure that you have conducted the checks in Q1 [above]
2. Does the game you are playing offer support for game controllers? Please refer to
the "Enabling Your Controller in Game" section in this manual for further information.
Q: Some of the movements make on my wireless joystick are not being picked up in the
game I’m playing.
A: There is interference on the wireless channel your stick is using to communicate with
the receiver. Press the scan button on the underside of your stick once to switch to
an interference-free channel.
Programming your Saitek controller with Saitek Smart
Technology Programming Software
Introducing Saitek Smart Technology Programming Software
Saitek Smart Technology Programming Software (SST) is the software Saitek supplies
to configure your Saitek controller for enhanced functionality. SST delivers a powerful
set of features, allowing you to program your device with the ultimate configuration for
total interaction. Despite a level of sophistication previously unseen in the market, and
because of the Saitek Smart Technology inside, the software remains simple and
intuitive to use.
For a complete guide on how to program your Saitek controller, visit the Saitek website
at www.saitek.com.
Features of Smart Technology Programming Software:
•
Quick and easy setup in any game
•
Personalize the controller settings for your favorite games
•
Configure your controller with an on-screen 3D model and interface
•
Multiple setup option for each controller - ideal if a controller is used by several
people
•
Program special moves with sophisticated timing features
•
Special game setups available as ‘Profiles’ from the Saitek website and on the Smart
Technology CD
•
Download the latest version of Saitek Smart Technology software from the Saitek
website
What is a Profile?
A Profile is a custom setup for improved gameplay – consisting of a set of commands
that are pre-assigned to the buttons or axes of your controller. There are over two
hundred pre-written Profiles available on the Product Companion Disk that accompanies
this device or on the Saitek Website – www.saitek.com. (Please check the website for
new or improved Profiles, which are being added regularly).
How do I program my controller?
After getting to know your controller, you can start creating your own personal Profiles
with the Saitek Smart Technology programming software (SST). This software has
virtually unlimited programming capabilities and allows you to customize the controller to
your exact gaming needs.
The Profile Editor allows you to program the buttons on your controller to perform
different actions within your games – this is especially useful if the game you are using
does not have its own screen that allows reconfiguring of your buttons.
Getting Started
Double-click on the Saitek Smart Technology icon the install left on your desktop.
In the Profile Editor, choose the control to which you wish to assign a keyboard
command. You do this by left-clicking on the control’s cell in the control list on the
right of the screen.
With the cursor flashing, type in the key commands and then click on the green tick
mark when complete.
Repeat this procedure for all the buttons you would like to program and then click
File, Save at the top of the Profile Editor window.
Give the profile a name (it is recommended you name it after the game for which the
profile is intended) and then click Save.
To enable the profile either click the Profile Now icon at the top of the Profile Editor
(it looks like a black and yellow crosshair) or right-click on the controller icon in your
taskbar and select the name of the profile from the pop-up list of options.
You will notice that when a profile is loaded that the controller icon in your taskbar
has a green square behind it, indicating that a profile is currently loaded. If you wish
to unload a profile simply right-click on the controller icon and click Clear Profile
from the pop-up list of options.
Technical Support
Can’t get started – don’t worry, we’re here to help you!
Nearly all the products that are returned to us as faulty are not faulty at all - they have
just not been installed properly.
If you experience any difficulty with this product, please first visit our website
www.saitek.com. The technical support area will provide you with all the information you
need to get the most out of your product and should solve any problems you might have.
If you do not have access to the internet, or if the website cannot answer your question,
please contact your local Saitek Technical Support Team. We aim to offer quick,
comprehensive and thorough technical support to all our users so, before you call,
please make sure you have all the relevant information at hand.
To find your local Saitek Technical Support Center, please see the separate Technical
Support Center sheet that came packaged with this product.
Conditions of Warranty
Warranty period is 2 years from date of purchase with proof of purchase submitted.
Operating instructions must be followed.
Product must not have been damaged as a result of defacement, misuse, abuse,
neglect, accident, destruction or alteration of the serial number, improper electrical
voltages or currents, repair, alteration or maintenance by any person or party other
than our own service facility or an authorized service center, use or installation of
non-Saitek replacement parts in the product or the modification of this product in any
way, or the incorporation of this product into any other products, or damage to the
product caused by accident, fire, floods, lightning, or acts of God, or any use violative
of instructions furnished by Saitek plc.
Obligations of Saitek shall be limited to repair or replacement with the same or
similar unit, at our option. To obtain repairs under this warranty, present the product
and proof of purchase (eg, bill or invoice) to the authorized Saitek Technical Support
Center (listed on the separate sheet packaged with this product) transportation
charges prepaid. Any requirements that conflict with any state or Federal laws, rules
and/or obligations shall not be enforceable in that particular territory and Saitek will
adhere to those laws, rules, and/or obligations.
When returning the product for repair, please pack it very carefully, preferably using
the original packaging materials. Please also include an explanatory note.
IMPORTANT: To save yourself unnecessary cost and inconvenience, please check
carefully that you have read and followed the instructions in this manual.
This warranty is in Lieu of all other expressed warranties, obligations or liabilities.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT
NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO
THE DURATION OF THIS WRITTEN LIMITED WARRANTY. Some states do not
allow limitations on how long an implied warranty lasts, so the above limitations may
not apply to you. IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL OR
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER
WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER Some states do not allow
the exclusion or limitation of special, incidental or consequential damages, so the
above limitation may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
FCC Compliance and Advisory Statement
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
This device may not cause harmful interference, and;
This device must accept any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna;
- Increase the separation between the equipment and receiver;
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected;
- Consult the dealer or an experienced radio/TV technician for help.
Product Information
Frequency
Power Supply
Wireless Range
2.402 – 2.480 MHz
1 x AA 1.5V battery
10m (approx. 30ft)
Battery Information
1 x AA 1.5V battery
- Must be disposed of properly
- May explode if damaged or disposed of in fire
- Do not short circuit
Saitek Industries, 2295 Jefferson Street, Torrance, CA 90501, USA
Canada 210
Operation is subject to the following two conditions:
1 This device may not cause interference, and;
2 This device must accept any interference, including interference that may cause
undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Importer’s Declaration of Conformity
Manufacturers address:
Saitek Electronics (Shenzhen) Ltd
Da Bao Road
District 33
Shenzhen
PRC
Authorised representatives address:
Saitek plc
3 & 4 West Point Row
Great Park Road
Almondsbury
Bristol
BS 32 4QG
United Kingdom
Identification of Equipment:
PS30 – Cyborg Evo wireless Joystick for PC
Intended usage:
For home use
Conformity specification:
Reference to European harmonised standards
EN 600 65 :1998
EN 300 440-2 :2001
EN 301 489-17:2000
Technical Construction File Ref.:PC joysticks/PS30
The above equipment conforms to the essential requirements of the following directive:
1999/5/EC EC Radio and Telecom Terminal Equipment directive
The essential requirements the above equipment conforms to are:
Article 3.1a (Safety)
Article 3.1b (EMC)
Article 3.2 (Use of radio spectrum)
Signed:
Name: Martin Mannix
Position: Quality Manager
Date: 07/06/2004
Company: Saitek plc Place: United Kingdom
©2004 Saitek Ltd. Made and printed in China.
All trademarks are the property of their respective owners.
XXXX
Disclaimer:
http://www.saitek.com/uk/info/email.htm

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2005:03:11 15:53:34-05:00
Modify Date                     : 2005:03:11 15:53:34-05:00
Page Count                      : 13
Creation Date                   : 2005:03:11 20:53:34Z
Mod Date                        : 2005:03:11 20:53:34Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Administrator
Metadata Date                   : 2005:03:11 20:53:34Z
Creator                         : Administrator
Title                           : Microsoft Word - 522904.DOC

EXIF Metadata provided by EXIF.tools