Saiyin Electronics DS6X Sound bar User Manual Important safety Instructions

Shenzhen Saiyin Electronics Co., Ltd. Sound bar Important safety Instructions

User Manual

DS6X SeriesModel: DS6201/6301/6401/6501/6601/6701DS6202/6302/6402/6502/6602/6702DS6203/6303/6403/6503/6603/6703DS6205/6305/6405/6505/6605/6705User ManualTotal 50W36 Inches StereoTV Sound Bar System
Table of ContentssImportant Notes --------------------------------------------------------------------------------- 1Important Safety Instructions ----------------------------------------------------------------- 2Safety instructions i-------------------------------------------------------------------------- 2Battery precautions ------------------------------------------------------------------------- 3FCC information ----------------------------------------------------------------------------- 4Package Contents ------------------------------------------------------------------------------ 5Features and Specifications ------------------------------------------------------------------ 6System Overview i------------------------------------------------------------------------------- 7Front view ii------------------------------------------------------------------------------------ 7Connector panel i---------------------------------------------------------------------------- 7Remote control ii----------------------------------------------------------------------------- 8Setting Up the System i------------------------------------------------------------------------- 9Unpacking i------------------------------------------------------------------------------------ 9Preparation ii---------------------------------------------------------------------------------- 9Wall mounting i------------------------------------------------------------------------------- 10Optical and coaxial cable connection i-------------------------------------------------- 11Audio cable connection 1 ----------------------------------------------------------------- 12Audio cable connection 2 ----------------------------------------------------------------- 13Using the System i------------------------------------------------------------------------------ 14Using the remote control i----------------------------------------------------------------- 14Get power and started i-------------------------------------------------------------------- 16Selecting a sound mode ------------------------------------------------------------------ 16Basic functions i----------------------------------------------------------------------------- 17Bluetooth function -------------------------------------------------------------------------- 18Troubleshooting -------------------------------------------------------------------------------- 19Care and Maintenance i----------------------------------------------------------------------- 21Cleaning ii------------------------------------------------------------------------------------- 21Warranty information ---------------------------------------------------------------------- 21English
Important NotessBefore using the TV sound bar system, please read the following important notes.Please read this user manual carefully and save it for future reference.For optical and coaxial cable connection, change your source device’s audio outputsetting to “PCM”format . Refer to your source device’s user manual for moreinformation.For the better sound quality, please set the volume of the sound bar to 75 percent ofmaximum（Note: the maximum volume drop 3 levels is 75 percent） and set the volumeof your source device to a suitable level.To get a better sound effect, press the movie, music or news button on the remotecontrol to select a suitable sound mode.The recommended sound mode selections as below:Program sourceSound modeProgram sourceSound modeStrong bass filmMusic or newsStrong bass musicMusic or newsGeneral filmMovie or musicPop musicMovie or MusicDocumentaryMusic or newsLight musicMusic or newsVariety showMusic or newsNews / DialogMusic or newsThe sound mode selection and the volume settings are saved in the memory even afterthe sound bar is powered off, and the volume settings from 75 percent to maximum willbe saved to 75 percent.For audio cable connection, you can boost / restore the volume by double clicking theboost button on the remote control.The audio output of the sound bar is affected by the settings of the connected source.Ifnecessary, adjust the settings of the source to improve the audio output.Not all remote control functions can be found on the sound bar. Please keep theremote control properly.Disconnect the power adapter from the electrical outlet to power off your sound barcompletely.The lightning flash with arrowhead symbol within an equilateral trianglealerts the user to the presence of uninsulated, dangerous voltage within thesystem enclosure that may be of sufficient magnitude to constitute a risk ofelectric shock.The exclamation point within an equilateral triangle, as marked on thesystem, is intended to alert the user to the presence of important operatingand maintenance instructions in this user manual.English - 1
Important Safety InstructionssDo not make unauthorized alterations to the system, doing so may compromise safety,regulatory compliance, and may void the warranty.This system contains magnetic material, contact your physician if you havequestions on whether this might affect the operation of your implantablemedical device.Do not place naked flame sources,such as lighted candles,on or near the system.Safety instructions1. Follow all safety instructions, and keep the user manual for further use!2. Check that the power supply voltage and current rating corresponds with the powersupply details shown on the system rating label before connecting the system to themain power supply.3. Never use a system that is damaged! Disconnect the system from the power supplyand contact your supplier if it is damaged.4. Danger of electric shock! Never try to repair the system yourself. In the event of anymalfunction, repairs are to be conducted by qualified personnel only.5. Warning! The system should not be used near water. Do not operate thesystem with wet hands or while standing on a wet floor.6. Warning! This system must be used indoors. It is neither designed nortested for use outdoors, in recreational vehicles, or on boats.7. Do not open the system casing under any circumstances. Do not insert any foreignobjects into the inside of the casing.8. Never use accessories which are not recommended by the manufacturer.They couldpose a safety risk to the user and might damage the system. You must therefore useoriginal accessories only.9. The system is only suitable for use at moderate degrees of latitude. Do not use in thetropics or in particularly humid climates.10. Keep the system away from any hot surfaces and open flames. Always operate thesystem on a level, stable, clean and dry surface. Protect the system against heat andcold, dust, direct sunlight, moisture, dripping and splashing water.11. This system is not intended for use by persons (including children) with reducedphysical, sensory, or mental capabilities, or by those who lack experience andknowledge, unless they have been given supervision and instruction concerning2–English
Important Safety Instructionssithe use of the system by a person responsible for their safety.12. Children should be supervised to ensure that they do not play with the system.13. This system is classified as protection class II and must not be connected to aprotective ground.14. Regularly check the power plug and power cord for damage. If the supply cord isdamaged. The adapter cannot be used and need to replace.15. Avoid damage to the power cord. Do not crush, squeeze, bend, or scour on sharpedges. Keep the power cord away from hot surfaces and naked flames.16. Lay the cables in such a way that nobody can inadvertently pull them or trip over them.17. Do not pull the plug out of the socket by the power cord, and do not wrap the powercord around the system.18. If an extension cord is used, its capacity needs to be suitable for the power consumedby the system.19. Connect the power adapter to an easily reachable electrical outlet so that in case ofan emergency the system can be unplugged immediately, Pull the power adapter outof the electrical outlet to completely switch off the system, Use the power adapter asthe disconnection device.20. Disconnect the power adapter from the electrical outlet when not use and beforecleaning.21. Always switch the system off before disconnecting the power adapter.22. Caution! Only use this system with the supplied power adapter.23. Caution! In the event of a malfunction as a result of electrostatic dischargeand momentary electrical surges, unplug the system and plug it in again.24. Make sure that no electrical wire, water, gas or other lines are located around theinstallation location.25. Ensure that there is sufficient ventilation, keep a minimum distance of 2 inches (5cm)between the system and other objects or walls.Battery precautionsFollow these precautions when using a battery in this device.1. Use only the size and type of battery specified.2. Be sure to follow the correct polarity when installing the battery as indicated in thebattery compartment, a reserved battery may cause damage to the device.English - 3
Important Safety Instructionss3. Do not mix different types of batteries together ( e.g: Alkaline and Carbon-zinc) or oldbatteries with fresh ones.4. If the batteries in the device are consumed or the device is not to be used for a longperiod of time, remove the batteries to prevent damage or injury from possibleleakage.5. Do not try to recharge the battery not intended to be recharged; it can overheat andrupture. (Follow battery manufacturer’s instructions.)6. The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.7. Clean the battery contacts and also those of the device prior to battery installation.FCC informationThis device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1) this device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may cause undesiredoperation.Changers or modifications not expressly approved by the party responsible for compliancecould void the user’s authority to operate this equipment.Note: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one of more of the followingmeasure:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.Consult the dealer or an experienced radio/TV technician for help.This device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction.4–English
Package Contentss1 X Sound barAccessories:1 X Power adapter1 X User manual1 X Remote control1 X Optical cable1 X Coaxial cable1 X Audio cable (RCA to RCA)1 X Audio cable (stereo 1/8 inch(3.5mm) to RCA)2 X Wall mount brackets4 X Wall anchors 4 X Screws (M4 X 30mm)Note: Accessories are subject to change without notice.English –5
Features and SpecificationssFeaturesTotal 50 W power usage36 inches TV sound bar2.0 Channel two way speaker system6 speaker drivers (4 woofer and 2 tweeter)Analog audio interface (AUX input)Digital audio interface (optical input and coaxial input)Stream music from smart phone or tabletThe sound bar system can be mounted on the wallFull function infrared remote controlDigital controlled audio processing sound modeSpecificationsPower supplyInput :Output :Protection class:Energy efficiency level:Remote control:100-240VAC 50/60Hz15VDC 2.4A ( OCP>5.2A )Class IILevel VI2 X 1.5V AAA batteries (not supplied)Sound barOutput power :Frequency response :Signal to noise ratio :Total harmonic distortion:Standby power:25W X 2 (50W)70Hz –20KHz80dB ( A-weighting)-70dB ( A-weighting)Less then 0.5WDigital audio interfaces:Audio format:Sampling frequency:Sampling bit-rate resolutionOptical and coaxialPCM32KHz, 44.1KHz, 48KHz, 96KHz, 192KHz16 to 24 bitNote: Specifications are subject to change without notice.6–English
System OverviewsFront viewButtons1. Mode (Source)2. Play / Pause3. Power（Standby）4. Volume down5. Volume upSource indicators6. OPT (Optical)7. COAX (Coaxial)8. Power（Standby）9. BT (Bluetooth)10. AUX (Auxiliary)11. Speaker driver (Tweeter)12. Speaker driver (Woofer)14.Remote control sensorConnector panel15. Optical input socket16. Coaxial input socket17. AUX input sockets18. SUB output socket19. DC IN socketNote: SUB output socket is only for the powered subwoofer (not supplied) or wirelesssubwoofer (not supplied) connection.INPUTOPTCOAXR AUX LPOWERDCIN1234567891015161719SUBOUT1811141212121211English - 7
System OverviewsRemote controlButtonsNote: HDMI button is only for the HDMI converter (not supplied).20. Power21.Bluetooth22. HDMI23. Volume +24. Previous25. Play pause / mute26. Next27. Volume－28. Movie29. Music30. News31. Optical32. Coaxial33. AUX / boost20212224252627282930313233238–English
Setting Up the SystemsUnpackingRemove all packaging.Check for the presence of all parts and for transport damage. In case of damage orincomplete delivery, please contact your dealer.Please keep the packaging. The system can be stored in it, if not used for a longerperiod of time.PreparationThe Sound bar system serves as an audio output device and features wireless and wiredconnections. You can place the sound bar on a horizontal surface or mount it on a wall.When mounting it on a wall, pay attention to the following:The supplied wall mount brackets, wall anchors and screws can be used to fix thesound bar to a wall. The wall mount brackets are designed for vertical walls constructedof solid concrete, bricks or wooden.When installing on a cinder block wall, first verify that the blocks have a minimum of 1.2inch (3cm) of actual concrete wall thickness to be used for the wall anchors.If you are uncertain about the construction of your wall, please consult a qualifiedcontractor or installer for assistance.Ensure that the wall anchors and screws you use are stronger enough to support theweight of the sound bar and long enough to sufficiently grip the wall.It is strongly recommended to use the supplied wall anchors and screws.Additional tools (not included) are required for the installation.Do not over tighten screws.Use an electronic stud finder to check the wall type before drilling and mounting.During mounting, keep away children and pets.Make sure the sound bar is mounted in reach of a wall outlet.Caution!When placing the sound bar on an entertainment center, bookshelf, or anytype of enclosed space, be sure to allow at least 2 inches (5cm) of spacearound the sound bar for ventilation. If the sound bar is enclosed in a tightspace, without ventilation, heat generated from the sound bar couldproduce a potential heat hazard.English - 9
Setting Up the SystemsCaution!Make sure the power adapter is disconnected from the electrical outletbefore making any mounting and connection.During operation, if the cables require to be reconnected, the poweradapter must be disconnected first, otherwise damage to the systemmay result.Wall mounting1. The distance between the two brackets.DS6501: 32.60inches(82.8cm)DS6502: 32.52inches(82.6cm)DS6503: 32.13inches(81.6cm)DS6505: 31.97inches(81.2cm)2. Mark the position and drill 4 holes in the wall.The distance between the two bracketsrefers to the first item above.3. Insert 4 wall anchors into the holes, use a hammer if necessary.4. Use 4 screws to mount the brackets to the wall. Secure the screws.The distance between the two bracketsrefers to the first item above.5. Hang the sound bar onto the brackets. Make sure they are firm and stable.>>>10 - English1.78 inches(4.52 cm)(4.52 cm)1.78 inches
Setting Up the SystemsOptical and coaxial cable connectionUse the supplied optical cable or coaxial cable to connect the sound bar to a TV, DVD,Blu-Ray Player or other suitable devices.Connect one end to the optical or coaxial out socket of the TV, DVD, Blu-Ray Player orother suitable devices.Connect the other end to the optical or coaxial input socket of the sound bar.Note: For optical and coaxial cable connection, change your source device’s audio outputsetting to “PCM”format. Refer to your source device’s user manual for more information.Audio OUTCoaxialOpticalEnglish - 11INPUTOPTCOAXR AUX LDCINPOWERSUBOUT
Setting Up the SystemsAudio cable connection 1Use the supplied RCA to RCA audio cable to connect the sound bar to a TV, DVD,Blu-Ray Player or other suitable devices.Connect one end to the headphone or line out socket of the TV, DVD, Blu-Ray Playeror other suitable devices.Connect the other end to the AUX(L/R) input sockets of the sound bar.Note: For audio cable connection, you can boost / restore the volume by double clickingthe boost button on the remote control.R LAudio OUTINPUTOPTCOAXR AUX LDCINPOWERSUBOUT12 - English
Setting Up the SystemsAudio cable connection 2If your TV or other source device only has a headphones socket, use the suppliedstereo 1/8 inch (3.5mm) to RCA audio cable to connect the sound bar to your TV orother source devices.Connect one end to the headphones socket of the TV or other source devices.Connect the other end to the AUX(L/R) input sockets of the sound bar.Ensure your TV speakers are turned on. Refer to your TV’s user manual for moreinformation.Set your TV or other source device’s volume to the maximum.Note: For audio cable connection, you can boost / restore the volume by double clickingthe boost button on the remote control.HeadphoneEnglish - 13INPUTOPTCOAXR AUX LDCINPOWERSUBOUT
Using the systemsUsing the remote control >>> Inserting/replacing batteries1. Slide to open the battery compartment cover.2. Insert 2 X 1.5V AAA batteries (not supplied) into the battery compartment. Match thepolarity markings in the battery compartment.3. Close the battery compartment cover.Caution!The sound bar can only work with the remote control package included,not compatible with universal remote control.Always insert the batteries according to the correct polarity markings.Use only high quality batteries, low quality batteries might leak and cause damage.Remove the batteries from the remote control if you are not using it for an extendedperiod. The remote control could become damaged in case of battery leakage.Tips for usageIf the remote control does not work properly, replace the batteries.Make sure there are no obstacles between the remote control and Sound bar.The remote control may be less effective if:1. There are obstacles between the remote control and the infrared receiver.2. Other remote controls are operated at the same time.3. The battery power is low.14 - English132
Using the systemsUsing the remote control >>> Remote control operation range:Caution!Not all remote control functions can be found on the sound bar. Pleasekeep the remote control properly.Remote sensor30 degree30 degreeApprox. 16.5 feet (5 meters)English - 15Notes:When there is an obstacle between theremote sensor of the sound bar and theremote control, the remote control may notoperateWhen direct sunlight, an incandescentlamp, fluorescent lamp or any other stronglight shines on the remote sensor of thesound bar, the operation of the remotecontrol may be unstable
Using the SystemsGet power and startedMake sure all the source connections are made properly before you connect the poweradapter. Plug the power adapter to the DC IN socket, then to a suitable electrical outlet.The power indicator lights up red. Indicating the sound bar is in standby mode.Turning off your TV speakers: To avoid hearing distorted sound, turn off your TVspeakers. Refer to your TV’s user manual for more information.Power on your sound bar: Press the Power button on the sound bar or remote control.The power indicator lights up green.Check if sound is coming from the sound bar.Selecting a digital controlled audio processing sound modeThe digital controlled audio processing includes three sound mode: movie, music andnews.（Note:There is no sound mode indication on the sound bar)To get a better sound effect, press the movie, music or news button on the remotecontrol to select a suitable sound mode.The recommended sound mode selections as below:Program sourceSound modeProgram sourceSound modeStrong bass filmMusic or newsStrong bass musicMusic or newsGeneral filmMovie or musicPop musicMovie or MusicDocumentaryMusic or newsLight musicMusic or newsVariety showMusic or newsNews / DialogMusic or newsNotes:For the better sound quality, please set the volume of the sound bar to 75 percent ofmaximum（Note: the maximum volume drop 3 levels is 75 percent）and set the volumeof your source device to a suitable level.The sound mode selection and the volume settings are saved in the memory even afterthe sound bar is powered off, and the volume setting from 75 percent to maximum willbe saved to 75 percent.Set the volume of your source device to a low level before switching on the sound bar.Then increase the volume of your source device to a comfortable level.Disconnect the power adapter from the electrical outlet to power off your sound barcompletely.16 - English
Using the SystemsBasic functions >>> Selecting a sourceYou can have several source devices connected permanently to the sound bar.Available sources are: OPT / COAX / BT / AUXSourceFunctionOPTOptical , connection with an optical fiber cable.COAXCoaxial, connection with a coaxial cable.BTBluetooth, Connection to a Bluetooth Device.AUXAuxiliary, Connection with a RCA to RCA audio cable.Auxiliary, Connection with a 1/8 inch(3.5mm) to RCA audio cable.Press the M（Mode）button repeatedly on the sound bar or press the OPT, COAX, BT,AUX button on the remote control to toggle between the sources, The OPT, COAX, BT,AUX source indicator will light up blue accordingly.You can boost / restore the volume by double clicking the boost button on the remotecontrol when you use AUX source (audio cable connection).Basic functions >>> Play back functionsNormally playback functions can be managed through the controls of the connectedsource device.Alternatively, use the remote control and the buttons of the sound bar.KeyPress KeyFunctionM1 XSource selectionLong press 2 secondDisconnecting the Bluetooth deviceI< / >I1 XSkip to the beginning of the previous / next title－ / ＋1 XVolume down / Volume up>II / mute1 XPause / Mute sound (Flash the indicator light).2 XPlay / Restore sound.Notes:The volume boost and mode (source) selection is saved in the memory even after thesound bar is powered off.The audio output of the sound bar is affected by the settings of the connected source. Ifnecessary, adjust the settings of the source to improve the audio output.English - 17
Using the SystemsBluetooth functionExternal Bluetooth devices can be connected to the TV sound bar system via Bluetoothconnection.1. Press the BT button on the remote control to enter the Bluetooth mode. The Bluetoothindicator lights up blue.2. Activate the Bluetooth function of the external device and search for Bluetooth devices.3. Select Sine Audio from the Bluetooth device list.4. Follow the instructions shown on your device’s screen.5. When the Bluetooth connection is established, files from your connected Bluetoothdevice will be played through the sound bar.Disconnecting the Bluetooth device:Press M (Mode) button on the sound bar to enter AUX, OPT or COAX mode.Press the OPT, COAX or AUX button on the remote control to enter AUX, OPT orCOAX mode.Disconnect using your Bluetooth device. The sound bar starts searching for anotherBluetooth device.Long press the BT button on the remote control or M (Mode) button on the sound barabout 2 seconds to disconnect the current Bluetooth device. Long press about 2seconds again to reconnect the current Bluetooth device.Notes:Bluetooth works best within a range of up to 33 feet (10 meters).The music streaming may be interrupted by obstacles between the Bluetooth deviceand sound bar, such as walls, metallic casing that covers the device, or other devicesnearby that operate in the same frequency.If the connected device goes out of Bluetooth range, the system will reconnectautomatically when the device comes back within range.The current Bluetooth device connection is saved in the memory even after the soundbar is powered off.18 - English
TroubleshootingsProblemSolutionNo powerCheck the power adapter is properly connected to an electrical outlet.Check the DC plug is properly connected to the DC IN socket.Unplug the power adapter for at least one minute and reconnect.No SoundPress the Power button on the sound bar or remote control to turn onthe sound bar. The power indicator lights up green.Increase your TV’s volume to maximum.Press MUTE button on the remote control to restore sound.Ensure that the source device has correct volume settings and isplaying a track.Ensure the correct source device is selected.Plug the audio cable into a connector on your TV labeled AudioOutput or Audio OUT, not Audio Input or Audio IN.Optical and coaxial cable connection:Plug the optical cable into a connector on your TV labeled OpticalOUT or Digital OUT, Optical IN or Digital IN.Plug the coaxial cable into a connector on your TV labeled CoaxialOUT or Digital OUT, Coaxial IN or Digital IN.Activate PCM(Pulse Code Modulation)in the audio settings menu ofyour source device(see your source device’s user manual).Audio cable connection (connect to the headphone socket of TV):Turn on your TV speakers, Refer to your TV’s user manual for moreinformation.Poor audioqualityPress the movie, music or news button on the remote control toselect a suitable sound mode.Set the volume of the sound bar to 75 percent of maximum（Note: themaximum volume drop 3 levels is 75 percent）.Secure cable connections on the sound bar and TV (or otherconnected sources).Try with different source devices. If the problem still exists, check thecable connections.Ensure that the cables connected to the source devices are correctlyplugged in and the plugs are fully inserted.English - 19
TroubleshootingsProblemSolutionPoor audioqualityReduce the volume of your source device.Audio cable connection:Double clicking the boost button on the remote control to restore thevolume.Bluetooth connection:Bring the Bluetooth device closer to the sound bar and make surethat no obstacles are disturbing the connection.Remotecontrol doesnot workEnsure that the batteries are correctly inserted; if necessary, replacethe batteries.Bring the remote control closer to the sound bar and make sure thereare no obstacles in between. Ensure the remote control is within 16.5feet (5 meters) of the system.Aim the remote control directly at the infrared receiver of the system.Systemdoesn’t reactIt is malfunction probably due to electrostatic discharge.Unplug the power adapter for at least one minute and reconnect.Bluetoothdevice cannotbe connectto the soundbarBring the Bluetooth device closer to the sound bar.Switch off your device and/or sound bar, then back on, repeat thepairing process.Make sure the sound bar is not connected another Bluetooth device.Make sure that you have selected Sine Audio from the Bluetoothdevice list on your device.Ensure you are using the correct device.If the device is still not connected, try the following:Remove the sound bar (Sine Audio) from the list of “paired devices”on your phone/tablet.Turn the sound bar off and then on again.Pair it again with your phone/tablet. It should now successfullyestablish the pairing.Note: If none of the above solutions works, the Bluetooth device may bemalfunctioning. Try another Bluetooth device. If not even the new devicecan be connected, the sound bar may be malfunctioning. In this case,please consult your dealer for repair.20 - English
Care and MaintenancesCleaningWarning!Before cleaning, ensure to switch the system off and disconnect thepower adapter from the electrical outlet.Do not use petrol, alcohol or other abrasive cleansers to clean theexterior.Clean the surface of the system with a soft , dry cloth.Do not use any sprays near the system. Do not use any solvents, chemicals or cleaningsolutions containing alcohol, ammonia or abrasives.Do not allow liquids to spill into any openings.Use the original packaging if it is necessary to transport the systemWarranty InformationThe warranty period for this product is 12 months from the date of its original purchase. Ifmanufacturing defects occur, please contact your dealer at the first time, we will instructyou on how to return the defective unit back to us for repair or replacement.The following are excluded from the Sine Audio warranty coverage:Product over warranty.Damage resulted from misuse and abusive action.Damage resulted from chemical, fire, radioactive substance, and poison, liquid.Damage resulted from natural disaster.English - 21
English - V1.0Printed in China (2018)Ten years, just for original sound

Navigation menu