Salted FTW01BK Bluetooth Smart Shoes User Manual

Salted Venture Co., Ltd. Bluetooth Smart Shoes Users Manual

Contents

Users Manual

Salted Sports
S P O R T SF I T N E S S
Salted Golf Fitness Note
(Tablet Only)
1) USB Charging
If you bought wireless charging pad for
Salted shoes, then place your shoes
onto wirelss pad.
01. Charging shoes 02. Turnining the power on 04. Install and Activate SALTED application.
05. Connect Shoes to SATLED App (via Bluetooth)
06. Calibrate sensors of your shoes to enhance accuracy
User’s Manual
FTW01
Smart Shoes
Take out the shoe insole and
charge and plug your mico-USB
cable into the USB port.
[Power ON] Go to App Store or Google Play Store and search for Salted application like below.
During pairing mode, try to connect your shoes with SALTED application
by clicking “Connection” button on SALTED application.
03. Turning on pairing mode
Turn on pairing mode by clicing power/pairing button shortly.
When the pairing mode is on, Pink LED light flashes.
2) Wireless Charging
When charging
Fully charged
Low Battery
Normal Battery
User Scenario Status LED Light Indicator
LED Light Indicator when charging
High Battery
Red LED light flashes
Yello LED light flashes
Sky blue LED light flashes
LED light off
Power OFF
Pairing Mode
Power ON
Reset
Click power button for 3 seconds
Click power button for 3 seconds
Purpose Button Interaction LED Light Indicator
Button interaction and LED light Indicator
Click power button shortly
Click reset button shortly
Green LED light flashes twice and then
Blue LED light flashes.
Red LED light flashes twice and then
LED light is off.
Pink LED flashes.
Blue LED light flashes.
(which means the power is on)
※ For the first use, you must turn your shoes on first.
When you don’t use it for a long time, your shoes will go into sleep mode 5 minutes
after blue LED light flashes. Thus, you don’t need to turn your shoes off.
※ If there are more than 2 shoes with pairing mode on, you may be not be able to connect correct shoes.
Try to connect your shoes to SALTED app where there is only one shoes with pairing mode on.
During pairing mode, try to connect your shoes with SALTED application
by clicking “Connection” button on SALTED application.
[Power OFF]
After charging, turn on the power by clicking power/pairing button for 3 seconds.
When the power is on, Green LED light flashes twice and then Blue LED light is on.
Turn off the power by clicking power/pairing button for 3 seconds.
When the power is off, Red LED light flashes twice and the LED light is off.
Power button
*Right Shoe standard
Reset button
※ Recommemded minimum charging time : 30 mins
“This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions
(1) This device may not cause harmful interference, and
(2)This device must accept any Interference received, including interference that
may cause undesired operation.”
Modifications not expressly approved by the manufacturer may void the user's authority
to operate the equipment under FCC rules.
Product Issue & Information
If you experience issues or have questions while using our products,
please contact the customer service via email below.
SALTED Customer Service : cs@saltedventure.com
[How To Calibrate Sensors ]
Have a sit on a chair while lifting your feet from the ground.

Navigation menu