Saltillo WCB Wireless Charging Base User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2906140
Application ID	OOiteOPpd7e9ovc6ILLRJQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.41kB (230137 bits)
Date Submitted	2016-02-18 00:00:00
Date Available	2016-02-19 00:00:00
Creation Date	2015-08-10 09:50:29
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2015-12-17 19:29:39
Document Title	User manual
Document Creator	Acrobat PDFMaker 11 for Word
Document Author:	dwb

Chat Fusion 10 Wireless Charger
User’s Guide
DRAFT – Not for Distribution
Saltillo Corporation
2143 Township Road 112
Millersburg, OH 44654
www.saltillo.com
Copyright/Trademark Information
© 2015 Saltillo Corporation. All rights reserved.
Chat Fusion is a trademark of Saltillo Corporation.
User guide version1.0 ∙ 08/10/2015
Contents
Introduction ...................................................................................................................................................................3
Support Information ......................................................................................................................................................3
Setting Up the Wireless Charger ...................................................................................................................................4
Charging Your Chat Fusion Device .................................................................................................................................5
Troubleshooting ............................................................................................................................................................6
Care and Maintenance ..................................................................................................................................................7
Index ..............................................................................................................................................................................8
Chat Fusion 10 Wireless Charger User’s Guide
Introduction
This user’s guide provides instructions for using the Chat Fusion 10 Wireless Charger.
Note: A standard battery charger was also included in the box with your device. You can use either the
standard charger or the optional wireless charger to charge your Chat Fusion device, depending on
which is more convenient.
Support Information
Support information is available as follows:
Support articles can be found on the Saltillo website:
http://saltillo.com/support/
Training opportunities can be found on the Saltillo website:
http://saltillo.com/webinars
Contact Saltillo for Operational or Technical support at:
Phone: 1-800-382-8622
Email: service@saltillo.com
Trouble Tickets:
http://saltillo.com/tt/
Chat Fusion 10 Wireless Charger User’s Guide
Setting Up the Wireless Charger
You can charge the device battery with the charger stand open and the unit sitting upright or with the
stand closed and the unit lying flat.
[photo to be supplied]
[photo to be supplied]
Charger in Upright Position
Charger Lying Flat
1. Orient the charger in the upright or flat position.
2. Plug the charger into a wall outlet.
Note: Plugging the charger into a surge protector is recommended.
3. The charger’s LED will glow amber.
4. You are now ready to place your Chat Fusion device in the charger.
5. When you finish charging the device, you can leave the charger plugged or unplug it.
Chat Fusion 10 Wireless Charger User’s Guide
Charging Your Chat Fusion Device
We suggest charging the battery each night. If the charger is plugged in, the charger’s LED should be
glowing amber.
1. Position the Chat Fusion device stand against the back of the device.
2. Center the device on the charger with the back of the device against the charger.
3. The charger LED should turn blue.
Note: If the indicator does not turn blue, adjust the position of the device in the charger until the LED
turns blue.
4. The LED will continue to glow blue during charging.
When the device is fully charged:
1. Remove the Chat Fusion device from the charger.
2. Unplug the charger from the wall outlet or surge protector (optional).
3. Tap the device’s power button to turn the display on.
Chat Fusion 10 Wireless Charger User’s Guide
Troubleshooting
Issue: The device is in the charger, but the battery is not charging.
Try the following:
•
Verify that the charger is plugged into a wall outlet or surge protector. If you are using a surge
protector, make sure it is turned on.
•
Verify that the charger LED is glowing blue. If the LED is glowing amber, adjust the position of the
device in the charger until the LED turns blue.
Chat Fusion 10 Wireless Charger User’s Guide
Care and Maintenance
Periodically wipe dust from the charger.
If you need to clean the charger:
1. Unplug the charger
2. Wipe the charger with a soft, lint-free cloth slightly dampened with water.
3. Dry the charger with another soft, lint-free cloth.
Important! Do not spray or splash liquid directly on the charger or immerse it in water. Do not use
any kind of commercial cleaner.
Chat Fusion 10 Wireless Charger User’s Guide
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Chat Fusion 10 Wireless Charger User’s Guide

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : dwb
Create Date                     : 2015:08:10 09:50:29-04:00
Modify Date                     : 2015:12:17 19:29:39+08:00
Language                        : EN-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:12:17 19:29:39+08:00
Creator Tool                    : Acrobat PDFMaker 11 for Word
Document ID                     : uuid:afa8531d-6987-4736-b92a-823edb3156fc
Instance ID                     : uuid:f524b3a1-b5d7-41a8-9a6f-e499f733c773
Subject                         : 308
Format                          : application/pdf
Title                           : 
Creator                         : dwb
Producer                        : Adobe PDF Library 11.0
Source Modified                 : D:20150810135013
Company                         : Microsoft
Page Layout                     : OneColumn
Page Count                      : 8

EXIF Metadata provided by EXIF.tools