Salto Systems S L CB2 XS4 mini american Mifare/iClass/BLE technology Electronic Lock Series including all mechanical variants. User Manual 221405 16 12 20 E0

Salto Systems S.L XS4 mini american Mifare/iClass/BLE technology Electronic Lock Series including all mechanical variants. 221405 16 12 20 E0

Contents

User Manual (2 of 2)

221405-ED.-20/12/2016
FCC COMPLIANCE STATEMENTS
(FCCID: UKCAE9, UKCAE9W, UKCL90, UKCG90, UKCRPOE, UKCNRF, UKCA9XX, UKCA9XW, UKCCLAYIQ,
UKCABXX,
UKCABXW, UKCWRDBK, UKCCB2, UKCAEB, UKCEB7)
This device complies
with Part 15 of the
FCC Rules.Operation
is subject to the
following
two conditions:
(1)
this device may not cause harmful
interference,
and
(2)
this device must accept any
interference received, including interference
that may cause undesired
operation. Changes
or
modifications
not
expressly
approved by the party
responsible
for
compliance
could void the users
authority
to operate the equipment.
Note:
This equipment
has been tested and found to comply with the
limits
for a
Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits
are
designed
to provide
reasonable
protection
against harmful interference
in a
residential installation.
This equipment generates,
uses, and can
radiate
radio
frequency energy
and, if not
installed
and used in accordance with the instructions may cause
harmful interference
to radio
communications. However,
there is no
guarantee
that
interference
will not occur in a particular
installation.
If this
equipment
does cause
harmful interference
to radio or
television
reception, which can be
determined
by turning the
equipment
off and on, the user is
encouraged
to try
to correct the
interference
by one or more of the
following
measures:
Reorient
or
relocate
the
receiving
antenna.
Increase
the
separation
between the
equipment
and receiver.
Connect the
equipment
into an outlet on a circuit
different
from that to which the
receiver
is connected.
Consult the
dealer
or an
experienced radio/TV technician
for help.
CANADIAN COMPLIANCE STATEMENT
(IC: 10088A-AE9, 10088A-AE9W,
10088A-L90, 10088A-G90, 10088A-RPOE, 10088A-NRF,
10088A-A9XX,
10088A-A9XW, 10088A-CLAYIQ, 10088A-ABXX, 10088A-ABXW, 10088A-WRDBK, 10088A-CB2, 10088A-AEB, 10088A-EB7)
This device complies
with
Industry Canada licence-exempt RSS standard(s). Operation
is subject to the
following
two conditions: (1) this device
may not cause
harmful interference,
and
(2)
this device must accept any
interference received, including interference
that may cause undesired
operation. Changes
or
modifications
not
expressly
approved by the party
responsible
for
compliance
could void the users
authority
to operate
the equipment.
Le présent
appareil
est conforme aux CNR
dIndustrie Canada applicables
aux
appareils
radio
exempts
de licence.
Lexploitation
est
autorisé e
aux deux conditions suivantes: (1) l’appareil ne doit pas produire de
brouillage,
et (2)
lutilisateur
de
l’appareil
doit accepter tout brouillage
radioélectrique
subi, même si le
brouillage
est
susceptible
d’en compromettre le fonctionnement.
Distance
between
10088A-CLAYIQ
and
human
body must be
higher
than 20cm.
Distance entre
le
10088A-CLAYIQ
et le corps humain doit être
supérieure
à 20 cm.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to ICES-003.
EU COMPLIANCE STATEMENT
(Products:
All
SALTO Systems
S.L. products with
RFID/Wireless
capability)
EN Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol.
Lanbarren),
9 20180
Oiartzun Spain),
declares that this access control
equipment
is in
compliance
with the
essential requirements
and other
relevant
provisions of Directive 2014/53/EU (RED). You
will be able to find a copy of the original declaration of conformity at the following Internet address:
http://www.saltosystems.com/certificate
ES Por medio de la
presente SALTO Systems
S.L.
(Arkotz Kalea (Pol. Lanbarren),
9 20180
Oiartzun Spain) declara
que este equipo
de control de accesos cumple con los
requisitos esenciales
y
cualesquiera
otras
disposiciones
aplicables o
exigibles
de la Directiva
2014/53/UE (RED).
Podrá
encontrar
una copia de la
declaración
de conformidad
original
en la
siguiente
dirección de internet:
http://www.saltosystems.com/certificate
FR Par la
présente SALTO Systems
S.L.
(Arkotz Kalea (Pol. Lanbarren),
9 20180
Oiartzun Spain) déclare
que l’appareil équipement
pour le con trôle d’accès est conforme aux
exigences essentielles
et aux
autres dispositions
pertinentes de la
directive
2014/53/UE (RED).
Vous pouvez lécharger
une copie de la
déclaration
de conformi
originale
à travers
l’adresse
suivante:
http://www.saltosystems.com/certificate
DE
Hiermit erklärt SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9-20180 Oiartzun-Spain) dass sich das Gerät Zutrittskontrollgeräte
im
Übereinstimmung
mit den
grundlegendenAnforderungen
und den
übrigen einschlägigen Bestimmungen derRichtlinie
2014/53/EU (RED)
befindet. Eine Kopie der originalen Konformitserklärung finden Sie auf der folgenden
Internetseite:
http://www.saltosystems.com/certificate
NL Hierbij verklaart SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain)dat het toestel
toegangscontroleapparatuur
in
overeenstemming
is met de
essentiële
eisen en de andere
relevante
bepalingen van richtlijn
2014/53/EU (RED). u kunt een kopie van de
originele verklaring
van
overeenstemming vinden
op het volgende internetadres:
http://www.saltosystems.com/certificate
PT A
SALTO Systems
S.L. declara que este
equipamento
de controlo de
acessos
está conforme os
requisitos essenciais
e outras
disposições
da
Directiva
2014/53/UE (RED). Poderá
encontrar
uma cópia da
declaração
de
conformidade original
na
seguinte
direcção de internet: http://www.saltosystems.com/certificate
221405-ED.-20/12/2016
EU COMPLIANCE STATEMENT
(Products: All SALTO Systems S.L. products without RFID/Wireless capability)
EN Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol.
Lanbarren),
9 20180
Oiartzun Spain),
declares that this access control
equipment
is in
compliance
with the
essential requirements
and other
relevant provisions
of Directive 2014/30/EU (EMC) and
Directive 2014/35/EU (Electrical Safety). You will be able to find a copy of the original declaration of conformity at the
following
Internet
address: http://www.saltosystems.com/certificate
ES Por medio de la
presente SALTO Systems
S.L.
(Arkotz Kalea (Pol. Lanbarren),
9 20180
Oiartzun Spain) declara
que este equipo
de control de accesos cumple con los
requisitos esenciales
y
cualesquiera
otras
disposiciones aplicables
o
exigibles
de la Directiva
2014/30/UE (EMC) y la
Directiva
2014/35/UE (Electrical Safety). Podrá
encontrar
una copia de la
declaración
de conformidad
original
en la
siguiente
dirección de internet: http://www.saltosystems.com/certificate
FR Par la
présente SALTO Systems
S.L.
(Arkotz Kalea (Pol. Lanbarren),
9 20180
Oiartzun Spain) clare
que l’appareil équipement
pour le contle d’accès est conforme aux exigences
essentielles
et aux autres dispositions pertinentes de la directive
2014/30/UE, 2014/35/UE. Vous pouvez
charger
une copie de la déclaration de conformi
originale
à travers l’adresse
suivante: http://www.saltosystems.com/certificate
DE Hiermit erklärt SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain), dass sich das Gerät
Zutrittskontrollgeräte
in
Übereinstimmung
mit den
grundlegenden Anforderungen
und den
übrigen
einschlägigen Bestimmungen
der
Richtlinie
2014/30/EU, 2014/35/EU
befindet. Eine
Kopie der
originalen Konformitätserklärung
finden Sie auf der folgenden
Internetseite: http://www.saltosystems.com/certificate
NL Hierbij verklaart SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain)dat het toestel
toegangscontroleapparatuur
in
overeenstemming
is met de
essentiële
eisen en de andere
relevante
bepalingen van richtlijn
2014/30/EU, 2014/35/EU. U kunt een kopie van de originele verklaring van
overeenstemming
vinden op het volgende
internetadres: http://www.saltosystems.com/certificate
PT A
SALTO Systems
S.L. declara que este
equipamento
de controlo de
acessos
está conforme os
requisitos
essenciais e outras
disposições da Directiva 2014/30/UE e 2014/35/UE
(Segurança Elétrica).
Poderá encontrar uma cópia da declaração de
conformidade original
na
seguinte
direcção de internet: http://www.saltosystems.com/certificate
ELECTRICAL
WARNINGS
Caution: Risk
of
explosion
if battery is
replaced
by an incorrect type.
Dispose
of used
batteries
according to the instructions.
Recommended
batteries:
Duracell Plus
Power
AAA
(MN2400)
Simply Duracell AAA
(MN2400)
Varta
High
Energy AAA
(04903)
Varta Longlife AAA
(04103)
Varta Industrial AAA
(04003)
Simply Duracell
AA (MN1500)
Varta
High
Energy
AA (04906)
Duracell Plus
Power AA (MN1500)
Varta Industrial
AA (04006)
Varta Longlife
AA (04106)
Panasonic CR2
Lithium
Panasonic CR2 Lithium
Industrial
Duracell Ultra
CR2
Lithium
(DLCR2)
Frecuency/Output power
Technology
Operating Frequency (MHz)
Output max. Power (dBm)
RFID
13.56
+25
Radio (IEEE
802.15.4)
2394-2507
+5
Bluetooth 4.0
2400-2483.5
+8
Wifi (Clay-IQ2)
2412- 2462
+21.1
GSM (Clay-IQ)
824-849 / 869-894 / 880-915 / 925-960/1710-1785 / 1805-1880 /1850-
1910 / 1930-1990
+35
GSM (Clay-IQ2)
832-862/791-821/1710-1785/1805-1880/2500-2570/2620-2690/1920-
1980/2110-2170/880-915/925-960/824-849 / 869-894/880-915 / 925-
960/1710-1785 / 1805-1880/1850-1910 / 1930-1990
+33
MECHANICAL WARNINGS
In order to confirm the correct
operation
of this
electronic device, SALTO recommends
using it in combination with a lock
destined
for that use
(door mass,
frequency
of use, fire door, etc) and that is in good
operational
conditions.
The SALTO
product should be treated with care during
the
installation
process to avoid any
aggressive
contact that may damage the unit. It may be
necessary
to loosen the trims mounting during
installation.
Do not bring the
device
into contact with oil, paints or acids. Do not paint the door with the mortise lock or
electronic device
already
mounted on the door.
CLEANING THE ELECTRONIC DEVICE:
a damp cloth with mild soapy water can be used.
Never
use
abrasive
soaps or
sprays.
For best
performance, stainless steel
should be
cleaned
regularly.
LEGAL WARNINGS
SALTO shall not be liable for any losses, personal damages or claims arising from, or in connection with the incorrect
installation
of the
cylinders/lockers
and/or improper
programming
that may
result
blocked entry and/or exit.
Note that when the door is closed without the lock
having
been
already
programmed, the lock will
automatically
lock and can only be opened
221405-ED.-20/12/2016
with a
Portable Programing Device (PPD).
If you
have questions
or doubts on this,
please
contact your
authorized
SALTO
supplier.
In accordance
with the SALTO
SYSTEMS LIMITED WARRANTY,
the warranty does not cover product failures due to repairs, modifications or product
manipulations performed
by
anyone
other than
authorized SALTO dealers
or
personnel. Likewise,
the
warranty
is also made
null
and void if the
inner electromechanical structure
is in any way
manipulated (for instance, loosening
the
screws)
by
anyone
other than
SALTO
personnel.
SALTO Systems, C/Arkotz nº9 Pol. Lanbarren, Arkotz Kalea, 20180 Oiartzun, Spain
http://www.saltosystems.com

Navigation menu