Sam Ash Music AH2 Wireless Microphone Transmitter User Manual Airline Micro Earset OM v1 4

Sam Ash Music Corporation Wireless Microphone Transmitter Airline Micro Earset OM v1 4

User Manual

Table of ContentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 1System Components . . . . . . . . . . . . . . . . . . . . . 3Quick Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Wearing the AH2 Transmitter . . . . . . . . . . . . . . . . 7Guided Tour - AR2 Receiver . . . . . . . . . . . . . . . . . 8Guided Tour - AH2 Transmitter . . . . . . . . . . . . . . . 10AR2 Dock. . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .13AirLine Micro Channel Plan . . . . . . . . . . . . . . . . .14Samson Technologies Corp.v1.445 Gilpin AvenueHauppauge, New York 11788-8816Phone: 1-800-3-SAMSONFax: 631-784-2201 www.samsontech.com
+4+0'+%41#45'690'45#07#. EIntroductionThank you for purchasing the Samson AirLine Micro Earset wireless system, a breakthrough in wireless microphone technology. Wireless systems were originally developed to eliminate cables. Samson took this one step further by creating the AH2 single earset transmitter, which provides unparalleled freedom of movement. The AirLine Micro features an integrated omni-directional micro-phone and flexible gooseneck boom, which always allows you to obtain the perfect position to pick up your voice, even during high-impact performance. The frequency response of the transmitter has been tailored for accurate and articulate vocal reproduc-tion. The AH2 transmitter is also water resistant, and designed with extra care to ensure that no moisture can accumulate during performances. This makes the AH2 perfectly suited for aerobics instructors, and high-energy performers and presenters. Housed in a rugged aluminum chassis with retractable antennas, the AR2 provides the ultimate in portability and flexibility. The AR2 micro receiver features an 1/8” unbalanced audio output, with microphone or line level output, USB DC-input, and RF and Battery LED indicators. The included AR2D dock provides stability for the receiver, and facilitates ease of use. The AirLine Micro utilizes the latest in miniaturized electronic components, as well as lithium ion batteries, which result in Samson’s smallest and most comfortable wireless system, while preserving the high-quality audio you expect out of a Samson wireless device. The AirLine Micro system ensures clear, interruption-free performance by incorporating tone-key with auto-mute, which only allows the transmitter’s audio to pass through the receiver, and mutes the output if there is interference.The AirLine Micro system uses fully rechargeable Lithium Ion technology. The AirLine Micro AH2 transmitter and AR2 receiver fea-ture internal rechargeable batteries for 10 hours of battery operation. Both the AH2 and AR2 can be recharged with the included AC adaptor and USB Y-cable. The AR2 can be powered directly off of the AC adaptor, for continuous operation. The AH2 and AR2 can also be recharged by USB bus power when connected to any USB host-equipped device.
+4+0'+%41#45'6 90'45#07#.FIntroductionIn this manual, you’ll find a detailed description of the features of your AirLine Micro Earset system, as well as a guided tour of its components, step-by-step instructions for setting up and using your system, and full specifications. If your AirLine Micro Earset system was purchased in the United States, you’ll also find a warranty card enclosed—don’t forget to fill it out and mail it! This will enable you to receive online technical support and will allow us to send you updated information about this and other Samson products in the future. If your Airline Micro Earset system was purchased outside of the U.S., contact your local distributor for war-ranty details. Also, be sure to check out our website (http://www.samsontech.com) for information about our full product line.SPECIAL NOTE for U.S. Purchasers: Should your Airline Micro Earset system ever require servicing, a Return Authorization (RA)num-ber is necessary. Without this number, the unit will not be accepted for return. If your AirLine Micro Earset system was purchased in the United States, please call Samson at 1-800-372-6766 for an RA number prior to shipping your system. If possible, return the unit in its original carton and packing materials. If your AirLine Micro Earset system was purchased outside of the U.S., contact your local distributor for information.BATTERY NOTE: Lithium-ion batteries are low maintenance and provide higher power in a lighter package when compared to NiCad (nickel-cadmium). All Lithium-ion batteries have a finite number of times they can be recharged, called a charge cycle. A charge cycle means using all of the battery’s power, but does not necessarily mean a single charge. The battery can be recharged when needed, and does not need to be fully discharged (as compared to NiCad). Repetitive full discharges of the battery should be avoided. Lithium-ion batteries need to be used for maximum life and performance. If you are not using your wireless system often, be sure to complete a full charge cycle at least every three months. If you need to replace your AH2 or AR2 battery please contact Samson or your local distributor.
+4+0'+%41#45'690'45#07#. GSystem ComponentsAH2 Transmitter AR2 Receiver AR2D DockUniversal AC Adaptor1/8” to 1/4” Audio CableUSB Y-Power CableCarry Case Owners ManualNote: Universal AC Adaptor works from 100V - 240V. Plug adaptors snap into place and can be changed by sliding the button below the plug. Each system is shipped with one plug adaptor specific to the country where the system is purchased. Plug adaptors can be ordered through Samson. 3 Windscreens
+4+0'+%41#45'6 90'45#07#.HQuick StartPlease follow these basic procedures for setting up and using your AirLine Micro:1. For your AirLine Micro system to work correctly, both the receiver and transmitter must be set to the same channel. Remove all packing materials (save them in case your unit needs service in the future) and check to make sure that the supplied receiver and transmitter are set to the same channel. Note: The channel number is laser-engraved on the back of the AR2 and AH2 chassis. If these channels do not match, please contact Samson Technical Support at 1-800-372-6766. If your unit was purchased outside of the U.S., please contact your local distributor.2. Before using your AirLine Micro system you should fully recharge the transmitter and receiver batteries. Plug the AC adap-tor into a power socket. Connect the USB Y-Cable into the USB socket on the AC adaptor. Plug the two mini-USB connectors into the USB ports on the AH2 transmitter and AR2 receiver. When the transmitter and receiver are completely charged, the BLUE LED indicator will turn off. 3. Remove the USB cable and continue with setup. 4. Physically place the receiver where it will be used (if desired, the AR2 receiver model can be used with the included AR2D dock) and fully extend the antennas vertically.5. Turn your audio system off and connect the receiver’s 1/8” unbalanced output jack to the microphone or line level audio input of your amplifier or mixer. Set the AR2 Mic/Line Level switch to match the input.6. Turn on the receiver using the Power Switch. When on, the Status Indicator will be steady YELLOW.
+4+0'+%41#45'690'45#07#. I7. Turn on your AH2 transmitter by pressing and holding the Multi-Function Switch, until the Status Indicator LED flashes GREEN, then release it. The AH2 Status Indicator will now light steady GREEN. The AR2 receiver Status Indicator will change from YELLOW to GREEN indicating that it is receiving a valid RF signal.8. Position the AH2 on your head, as illustrated on page 7.9. Turn on your connected amplier and/or mixer, but keep its volume all the way down. Make sure the AH2 transmitter is not muted. Note: If the AH2 is muted, the AH2 Status Indicator LED will ash GREEN and the AR2 Status Indicator will ash GREEN. To unmute the AH2, press the Multi-Function Switch and the Status Indicator will light steady GREEN.10. Speak or sing into the earset microphone at a normal performance level while slowly raising the audio input control of your amplier or mixer, until the desired volume is reached.11. If you hear distortion at the desired volume level, check to see whether the Status Indicator LED on the receiver is lighting RED. If it is not lit, make sure that the gain structure of your audio system is set correctly (consult the owners manual of your mixer and/or amplier for details). If the Status Indicator is RED, simply move the microphone further from your mouth. If you hear a weak, noisy signal at the desired volume level, make sure that the gain structure of your audio system and the Audio Output Level switch are correctly set. If the Audio Output Level switch is correctly set and the signal coming from the receiver is still weak and/or noisy, simply position the microphone closer to your mouth.Quick Start
+4+0'+%41#45'6 90'45#07#.JIf you feel that the level of the microphone needs further adjustment, press and hold the AH2 Multi-Function Switch while the unit is powered on until the Status Indicator turns o, and release the switch. Then press and hold the Multi-Function Switch again for 5 seconds. The AH2 Status Indicator will rst ash GREEN then ash YELLOW to show that you are in the Volume Adjustment mode. Press and release the Multi-Function Switch once, and the microphone volume will increase one level. To continue to adjust the microphone volume, press and release the Multi-Function Switch until the maximum level is reached. There are 5 levels. With each increasing level, the Status Indicator will ash faster. After level 5 is reached, the transmitter will cycle back down through the levels each time the Multi-Function Switch is pressed. As the levels decrease, the Status Indicator ashes slower. When the desired level is reached, release the Multi-Function Switch. The AH2 will return to normal operation after 10 seconds, and the Status Indicator will be steady GREEN.12. Do a walk-around through the intended area of coverage while observing the AR2’s Status Indicator; it should stay steadily GREEN, indicating sucient RF reception in all areas of coverage. If the AR2’s Status Indicator lights YELLOW, it designates RF dropout or muted receiver. Reposition the device (or its antennas) as necessary. If extended range coverage is required, another AR2 true diversity receiver (set to the same channel as the transmitter) should be used.13. If you have followed all the steps above and are experiencing diculties, please call Samson Technical Support (1-800-372-6766) between 9 AM and 5 PM EST. If you purchased your system outside of the U.S., please contact your local distributor.Quick Start
+4+0'+%41#45'690'45#07#. KWearing the AH2 TransmitterThe AH2 can be re-sized to fit comfortably on your ear. 1. Rotate the adjustment band up. (figure 1)2. Position the AH2 over your left ear so that the body of the transmit-ter is behind your ear. (figure 2)3. Push the adjustment band down until it is in front of your ear and is secure against your head. (figure 3)4. Position the microphone towards the corner of your mouth, approximately 1/2” away from the lips. 5. Position the moisture guard ring as close to the capsule as possible.6. For outdoor use, and to help reduce p-popping, install one of the included windscreens.figure 1figure 2figure 3
+4+0'+%41#45'6 90'45#07#.LGuided Tour - AR2 Receiver1. Antennas - The retractable antennas allow full rotation for optimum placement. In normal operation, both antennas should be fully extend-ed and placed in a vertical position, as shown below. 2. POWER Switch - Use this to turn the AR2 power on and off.3. Status Indicator - This three-color LED acts as a multi-function meter, indicating power, transmitter tone-key status, transmitter mute, and transmitter peak.YELLOW AR2 Powered On, No Tone-Key PresentGREEN AH2 On, Normal OperationFlashing GREEN AH2 Audio Muted RED Transmitter Input OverloadedMMNOPQRS
+4+0'+%41#45'690'45#07#. M4. Low Battery Indicator - This BLUE LED displays the status of the battery. The Low Battery Indicator will flash BLUE when the unit is on, and the battery is low. When recharging the AR2, the LED will be steady BLUE until the battery is fully charged, then the indicator will turn off.5. Audio Output Level Switch - Sets the audio output level of the unbalanced output to microphone or line level.6. USB DC Power Input - Connect the supplied universal adaptor to recharge the internal lithium ion rechargeable battery or to power the receiver. The USB DC input will also accept USB bus power from a computer USB port, or any 5-volt DC adaptor that has a USB output (including automotive). NOTE: The USB port is only used for charging purposes and cannot be used for data exchange between a PC and the AR2 receiver.7. 1/8” Unbalanced Output - Use this unbalanced (600 Ohm min.) 1/8” (3.5 mm) mini-phone jack when connecting the audio equipment. Guided Tour - AR2 Receiver
+4+0'+%41#45'6 90'45#07#.EN2. Microphone - Micro-miniature, 3mm omni-directional microphone capsule.3. USB DC Power Input - Connect the supplied universal adaptor to recharge the internal Lithium Ion battery. The USB DC input will also accept USB bus power from a computer USB port, or any 5-volt DC adaptor that has a USB output. NOTE: The Universal AC Adaptor will charge the AH2 & AR2 faster than a computer USB port. NOTE: The USB port is only used for charging purposes and cannot be used for data exchange between a PC and the AH2 transmitter.1. Status Indicator - This LED displays the operation mode, low battery and recharge status of the transmitter.Guided Tour - AH2 TransmitterPMNOGREEN Normal OperationFlashing GREEN MuteFlashing YELLOW Volume Adjustment ModeFastest Flashing YELLOW Maximum LevelSlowest Flashing YELLOW Minimum LevelFlashing BLUE Low BatteryBLUE Recharging - LED will turn o when AH2 is fully charged
+4+0'+%41#45'690'45#07#. EEGuided Tour - AH2 TransmitterFunction Activation Hold Time LED StatusPower ON/OFF Press and Hold > 1 sec GREENMute ON/OFF Press 0.2 - 2 sec Flashing GREENVolume Adjust Press and Hold > 5 sec Flashing YELLOWIncrease Gain Press (Total 5 steps) > 0.2 sec Flashing YELLOWDecrease Gain Press (Total 5 steps) > 0.2 sec Flashing YELLOWSet Level Don’t Press 10 sec GREEN4. Multi-Function Switch - Press and hold to turn the unit on or off. Press and release to mute or unmute the transmitter. To adjust the transmitter volume, while the AH2 is powered on, press and hold until the power turns off, release the switch, then press and hold the switch for 5 seconds and the Status Indicator will first flash GREEN then flashes YELLOW.
+4+0'+%41#45'6 90'45#07#.EFAR2 DockUSB DC Input1/8” Audio OutputFor added convenience and easy setup, we have included the AR2D dock. To use the dock please follow these steps:1. Slide the AR2 receiver into the AR2D dock. There are two keys on the rear of the AR2 that will match up and align with the AR2D so that the receiver will t correctly.2. Attach the included 1/8” to 1/4” audio cable to the audio output on the back panel of the AR2D.3. To recharge the AR2 receiver, connect the USB Y-cable to the USB DC input on the back panel of the AR2D and connect the cable to the included Universal AC adaptor.
+4+0'+%41#45'690'45#07#. EGSystem Operating Frequency N Band 642.375 MHz - 645.750 MHz E Band 863.125 MHz - 864.875 MHzNumber of Channels N Band 6 E Band 4Working Range 100m (300 ft.) line of sightAudio Frequency Response 100 Hz - 15 kHz T.H.D. (Overall) < 1% (@AF 1 kHz, RF 46 dBu)Operating Temperature –18°C (0°F) to +50°C (+122°F)Storage Temperature –5°C (23°F) to +35°C (+95°F) AH2 TransmitterAudio Input Level -110 dBv ~ 0 dBvVolume Adjustment Steps 5RF Transmitter Output 10 mW ERPPower Requirements Internal lithium ion rechargeable batteryBattery Life ~10 hoursDimensions 171 mm L x 14 mm W x 58 mm H 6.7” L x 0.6” W x 2.3” HWeight 22 grams (0.8 oz.) SpecificationsSensitivity 18 dBu (@ THD 2%)Power Requirements Internal lithium ion rechargeable battery or AC adaptorBattery Life ~10 hoursIndicators Power On, Tone Key, Transmitter Mute, Transmitter Peak, Battery Low, RechargingDimensions 43 mm L x 13 mm W x 60 mm H 1.7” L x 0.51” W x 2.4” HWeight 42g (1.5 oz.)AR2 ReceiverAudio Output Connector 1/8” UnbalancedAudio Output Level (Typical) -30 dBv (Mic), -10 dBv (Line)Audio Output Impedance Unbalanced 600 OhmsAF Frequency Response 50 Hz - 15 kHz Antennas Two 1/4 Wavelength RodSelectivity ±150 kHz (AF Out Ratio -60 dB)S/N Ratio (Overall) 90 dB (w/IHF-A Filter)
+4+0'+%41#45'6 90'45#07#.EHAirLine Micro Channel PlanChannel Frequencies Channel FrequenciesN1 642.375 MHz E1 863.125 MHzN2 642.875 MHz E2 863.625 MHzN3 644.125 MHz E3 864.500 MHzN4 644.750 MHz E4 864.875 MHzN5 645.500 MHzN6 645.750 MHzAirline Micro N-Channel wireless frequencies are within UHF TV frequency bands. Only certain channels may be available in particular areas. The six N-Channels have been selected for optimum multi-channel compatibility and may be used simultaneously, subject to frequency availability in your geographic area.Airline Micro E-Channel wireless frequencies may not be used in North America.
This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.This device complies with RSS-210 of Industry & Science Canada.Operation is subject to the following two conditions:(1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.CAUTION! Electrical shock can result from removal of the receiver cover. Refer servicing to qualified service personnel.No user-serviceable parts inside. Do not expose to rain or moisture.The circuits inside the receiver and transmitter have been precisely adjusted for optimum performance and compliance with federal regulations. Do not attempt to open the receiver or transmitter. To do so will void the warranty, and may cause improper operation.-J]SY[ERXXSHMWTSWIXLMWTVSHYGXHSRSXQM\MX[MXLKIRIVEPLSYWILSPH[EWXI8LIVIMWEWITEVEXIGSPPIGXMSRW]WXIQJSVYWIHIPIGXVSRMGTVSHYGXWMREGGSVHERGI[MXLPIKMWPEXMSRXLEXVIUYMVIWTVSTIVXVIEXQIRXVIGSZIV]ERHVIG]GPMRK4VMZEXILSYWILSPHMR XLIQIQFIVWXEXIWSJXLI)9MR7[MX^IVPERHERH2SV[E]QE]VIXYVRXLIMVYWIHIPIGXVSRMGTVSHYGXWJVIISJGLEVKIXSHIWMKREXIHGSPPIGXMSRJEGMPMXMIWSVXSEVIXEMPIVMJ]SYTYVGLEWIEWMQMPEVRI[SRI*SV'SYRXVMIWRSXQIRXMSRIHEFSZITPIEWIGSRXEGX]SYVPSGEPEYXLSVMXMIWJSVEGSVVIGXQIXLSHSJHMWTSWEP&]HSMRKWS]SY[MPPIRWYVIXLEX]SYVHMWTSWIHTVSHYGXYRHIVKSIWXLIRIGIWWEV]XVIEXQIRXVIGSZIV]ERHVIG]GPMRKERHXLYWTVIZIRXTSXIRXMEPRIKEXMZIIJJIGXWSRXLIIRZMVSRQIRXERHLYQERLIEPXL
FCC Consumer Alert for Wireless MicrophonesMost users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.
Samson Technologies Corp.45 Gilpin AvenueHauppauge, New York 11788-8816Phone: 1-800-3-SAMSONFax: 631-784-2201 www.samsontech.com
AirLine Micro Function & Indicator GuideAH2 Earset TransmitterStatus Earset Status Indicator LightPowering On Steady GREEN.Mute Intermittent GREEN ashes.Volume Adjust Intermittent YELLOW ashes. The indicator ashes faster as the volume is increased. The indicator ashes slower as the volume is decreased. Battery Low The indicator ashes BLUE.Charging Battery Steady BLUE. Indicator turns o when the battery is fully charged. AR2 ReceiverStatus Receiver Indicator LightsPowering On Status Indicator: Steady YELLOW.(AR2: ON, AH2: OFF)Powering On Status Indicator: Steady GREEN.(AR2: ON, AH2: ON)AH2 Mute Status Indicator: Intermittent GREEN ashes.Peak Status Indicator: Flashes RED.Battery Low Low Battery Indicator: Intermittent BLUE ashes.Charging Battery Low Battery Indicator: Steady BLUE. Indicator turns o when the battery is fully charged.

Navigation menu