Sam Ash Music HXD1 USB Digital Wireless System User Manual STAGE XPD1

Sam Ash Music Corporation USB Digital Wireless System STAGE XPD1

Users Manual

Download: Sam Ash Music HXD1 USB Digital Wireless System User Manual STAGE XPD1
Mirror Download [FCC.gov]Sam Ash Music HXD1 USB Digital Wireless System User Manual STAGE XPD1
Document ID2287624
Application ID1idfLPTIegejHMfd/tz8fA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize112.38kB (1404718 bits)
Date Submitted2014-06-06 00:00:00
Date Available2014-06-06 00:00:00
Creation Date2014-05-10 13:28:22
Producing SoftwareCorel PDF Engine Version 9.397
Document Lastmod2014-06-05 22:46:50
Document TitleSTAGE XPD1»¡©ú®Ñ
Document CreatorCorelDRAW Version 9.397
Document Author: test

Samson Technoiogies Corp.
45 Gilpm Avenue
Hauppauge, New Yerk11788-8816
Phone: 178007373AMSON (18003726766)
Fax 63178472201
www.5amsonlech.c0m
snmsaui’
Stage XPD1
USB Digital Wireless System
SAMSON
Quick Start Guide
E: if you want to dispose this product. do not mix it with general
househoio waste There is a separate collection system ior useo
_ electronic products in accordance with legislation that requires
proper treatment, recovery and recycling
Prrvate household in the 28 member states of the EU. in SWitzerland
and Norway may return their used electronic products free of charge to
deSignated collection facilities or to a retailer or you purchase a similar
new one).
For countries not mentioned above, please contact your local authorities
ror a correct method of disposal.
By doing so you will ensure that your disposed product undergoes the
necessary treatment, recovery and recycling and thus prevent potential
negatrve etrects on the environment and human health.
Copyright 2014
v1.1
Samson Technologies Corp.
45 Gilpin Avenue
Hauppauge, New York 11788-8816
Phone: 1s800s3sSAMSON (18003726766)
Fax: 6317842201
www.5amsontech.com
Safety Information
FCC Notice
1. This device complies With Part 15 of the FCC Rules. Opera
ation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, in
cluding interference that may cause undesired opera
tion.
2. Changes or modifications not expressly approved by the
party responSible for compliance could VOld the user’s au-
thority to operate the equipment.
FCC Statement
This equipment has been tested and found to comply With
the limits for a Class B digital deVice, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reason
able protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio fre
quency energy and, if not installed and used in accordance
With the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference Will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the folloWing
measures:
- Reorient or relocate the receiving antenna.
- increase the separation between the equment and
receiver.
- Connect the equipment into an outlet on a circuit differr
ent from that to which the receiver is connected.
- Consult the dealer or an experienced radiofTV technir
cian for help.
RF Warning Statement
The deVice has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.
This device complies With RSSaSlO of Industry Canada.
Operation is subject to the condition that this deVice does
not cause harmful interference.
WARNING: The battery (battery or batteries or battery pack) shall
not be exposed to excessive heat such as sunshine, fire or the like.
(£0197
Specifications
Simultaneous Systems . .
Working Range ......
Working Frequency. . . .
Modulation type .....
Audio Frequency Response
T.H.D . . . .....
Signal to Noise ......
Operating Temperature . .
Stage HXDI
Microphone Element . . .
Power Requirements . . .
Battery Life .
Dimensions .
Weight ..........
Stage RXDl
Max. Analog Audio Output Level.
Audio Output impedance.
USB audio sample rate. .
USB audio support. . . .
Operating Voltage
DimensionsthDxH) . . .
Weight ..........
. 2
. 100‘ line of sight
. 2.404-2 47BGHZ
.GFSK
. ZOHZ . 16KHZ
.85 dB
.710”: ~ +40°C
.Cl6 Dynamic
. <10 mW EIRF
.Two AA (LRS) alkaline batteries
. 20 hours
.102“ X 162.1“
260 mm x o54 mm
.0.5 lb
218g
.0 dBu
. 100 Kohms
.32 KHZ
. Vista, Win7, Wll’l8, Mac OSX
Without driver
.5V DC
3.5“ x O 9" x .31“
.89mmx23mmx8mm
.03502
10g
AI Samson, we are confinuafiy improving our products, therefore
specifications and images are sub/act to change without notice.
Introduction
Samson's Stage XPDl USB Digital Wireless System brings the
convenience of wireless to your computer recordings and beyond.
With a Wireless receiver built into a USB stick and a high quality
handheld dynamic microphone transmitter, the Stage XPDl allows
you to Wirelessly record stunning audio straight to your Mac/PC
and favorite digital audio software. It's the ideal Wireless system
for podcasting, YouTube peiformances, karaoke video games, voice
over proiects and much more.
The Stage XPDl operates in the licenserfree 2.40Hz frequency
band, which is free from interference caused by television stations
and other white space broadcast dewces. The included micror
phone transmitter features a high quality dynamic microphone
capsule designed to proVide exceptional sound reproduction for
spoken word presentations, as well as singing applications and
more. The Stage XPDl system is extremely fast and easy to setup
and has 100’ operating range (environment dependent) between
receiver and transmitter provrdes users with plenty of room to work
Wirelessly.
in addition to connecting directly to your computer for Wireless
recording purposes, the Stage XPDl is the perfect accessory for
expanding the reach of your Samson Expedition Series Portable PA
(XP106 and XPlOOO models only) Via their USB Wireless ports,
these Expedition PAs can be ioined With the Stage XPDl for full
range Wireless capability in a variety of live applications.
We recommend you keep the folloWing records for reference, as
well as a copy of your sales receipt.
Serial number:
Date of purchase:
Dealer name:
With proper care and maintenance. your Stage XPDl will operate
troublerfree for many years Should your system ever require
servicing, a Return Authorization (RA) number must be obtained
before shipping your unit to Samson. Without this number, the
unit Will not be accepted. Please call Samson at leBOOrSSAMSON
(17800737276766) for an RA number prior to shipping your unit.
Please retain the original packing materials and, if possible, return
the unit in its original carton. If your Stage XPDl was purchased
outside of the United States, contact your local distributor for
warranty details and serVice information.
Features
- 2.4GHz digital Wireless system
- Wireless receiver built into a USB stick
- Handheld dynamic microphone transmitter
- Easy pairing for fast set up
- 100' operating range (enwronment dependent)
- Ideal for podcasting, karaoke video games, voice over proiects
and more
. Record wirelessly to your favorite DAW or voice recognition
software on your Mac/PC
- Transmitter operates on two AA batteries (not included)
- Compatible with Samson Expedition Series Portable PAS that
feature USB Wireless ports
Stage XPDI Controls
Status Indicator - This LED displays the operation mode:
Amber Normal Operation
Flashing Amber Pairing/Low Battery
Power/Pair Switch - Press <5 seconds to turn the unit on or off.
Press >5 seconds to enter pairing mode.
Battery Dover - Unscrew the battery cover and slide down to
open the HXDl battery compartment.
Battery Holder - Open the battery holder by pressing the tab
and lifting the cover. Insert two standard AA (LRS) batteries
here; being sure to observe the plus and minus polarity markr
ings shown. Although rechargeable NirCad batteries can be
used; they do not supply adequate current for more than four
hours.
WARNING: Do not insert the batteries backwards; doing so
can cause severe damage to the HXDI and Will void your war;
ranty.
Input GAIN Control - This control adiusts the transmitter Input
sensitivity. This input sensitivity control has been factory we
set to provide optimum level for the particular microphone
capsule provided with the Stage XPD1 system and so we
recommend that this not be adyusted manually. If necessary,
however, you can use the supplied plastic screwdriver to raise
or lower the input level
USB Connector - Plugs into the USE Jack on the rear panel of a
Wirelessly enabled Samson audio device. The receiver can also
plug directly into a computer USB port and Will be recognized
as a USB audio device The unit passes audio to the device
and receives power from the device through this connector.
PAIR Switch - Press >5 seconds to enter pairing mode.
STATUS Indicator - This LED displays the operation mode:
Amber Normal Operation
Flashing Amber Pairing
Not Paired; Transmitter Out Of Range;
No Power
No Light
Quick Start
Plug the RXDl USB receiver into a USB Jack on a
Wirelessly enable Samson audio device or to a USB port
on a computer.
Note: When using the Stage XPD1 Wireless system With
a computer; you must set the computer's audio input
device to “Samson RXD Wireless Receiver". In most
computer operating systems, an audio software must
be used to record or monitor the audio from the USB
receiver.
On the wireless handheld transmitter, unscrew the
bottom section of the microphone by turning it
counterclockWise and then slide it off. Place a fresh set
of AA (LR6) batteries in the transmitter battery holder,
taking care to observe the polarity markings; then
replace the cover.
Turn the wireless level knob on the audio device
completely counterclockwise to 0, then turn the power
of the audio deVice to the ON position.
Turn on the power to the transmitter by pressing and
holding Power sWitch; the indicator LED Will light
amber.
lf the handheld transmitter and receiver have not been
previously paired, press and hold the button on the
RXDl receiver for >5 seconds, until it begins to flash.
Press and continue to hold the Power button on the
handheld transmitter until the LED indicators on both
units light steady; indicating that the receiver and
transmitter are paired and ready for operation.
Speak or sing into the microphone at a normal
performance level and raise the wireless level control
until the desired level is reached.
If you hear distortion turn down the wireless level on
the audio deVice. lf distortion is still audible; unscrew
the microphone body and use the supplied plastic
screwdriver to turn the Gain control in the HXDl
transmitter slowly counterclockwise until the distortion
disappears.
Conversely; if you hear a Weak; noisy signal at the
desired volume level and With the wireless level control
of the audio device is set to maximum; use the supplied
plastic screwdriver to turn the Gain control in the HXDl
transmitter slowly clockwise until the signal reaches an
acceptable level.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Corel PDF Engine Version 9.397
Create Date                     : 2014:05:10 13:28:22Z
Modify Date                     : 2014:06:05 22:46:50+08:00
Metadata Date                   : 2014:06:05 22:46:50+08:00
Creator Tool                    : CorelDRAW Version 9.397
Format                          : application/pdf
Creator                         : test
Title                           : STAGE XPD1»¡©ú®Ñ
Document ID                     : uuid:e11e0ce5-a922-4efb-94ce-ea795b27a302
Instance ID                     : uuid:daa28cfd-7a50-404c-b294-b239edbe6f57
Has XFA                         : No
Page Count                      : 4
Author                          : test
EXIF Metadata provided by EXIF.tools
FCC ID Filing: CCRHXD1

Navigation menu